High Moisture-Barrier Performance of Double-Layer Graphene Enabled by Conformal and Clean Transfer.

Graphene films that can theoretically block almost all molecules have emerged as promising candidate materials for moisture barrier films in the applications of organic photonic devices and gas storage. However, the current barrier performance of graphene films does not reach the ideal value. Here, we reveal that the interlayer distance of the large-area stacked multilayer graphene is the key factor that suppresses water permeation. We show that by minimizing the gap between the two monolayers, the water vapor transmission rate of double-layer graphene can be as low as 5 × 10-3 g/(m2 d) over an A4-sized region. The high barrier performance was achieved by the absence of interfacial contamination and conformal contact between graphene layers during layer-by-layer transfer. Our work reveals the moisture permeation mechanism through graphene layers, and with this approach, we can tailor the interlayer coupling of manually stacked two-dimensional materials for new physics and applications.

A CNN-LSTM based deep learning model with high accuracy and robustness for carbon price forecasting: A case of Shenzhen's carbon market in China.

Accurately predicting carbon trading prices using deep learning models can help enterprises understand the operational mechanisms and regulations of the carbon market. This is crucial for expanding the industries covered by the carbon market and ensuring its stable and healthy development. To ensure the accuracy and reliability of the predictions in practical applications, it is important to evaluate the model's robustness. In this paper, we built models with different parameters to predict carbon trading prices, and proposed models with high accuracy and robustness. The accuracy of the models was assessed using traditional survey indicators. The robustness of the CNN-LSTM model was compared to that of the LSTM model using Z-scores. The CNN-LSTM model with the best prediction performance was compared to a single LSTM model, resulting in a 9% reduction in MSE and a 0.0133 shortening of the Z-score range. Furthermore, the CNN-LSTM model achieved a level of accuracy comparable to other popular models such as CEEMDAN, Boosting, and GRU. It also demonstrated a training speed improvement of at least 40% compared to the aforementioned methods. These results suggest that the CNN-LSTM enhances model resilience. Moreover, the practicality of using Z-score to evaluate model robustness is confirmed.

Drinking Water in Rural China: Water Sources, Treatment, and Boiling Energy.

Access to safe drinking water is a major public concern in China. A national survey of 57 029 households was conducted to fill major knowledge gaps on drinking water sources, end-of-use treatment methods, and energy used to boil water. Herein, we show that surface water and well water were frequently used by >147 million rural residents living in low-income inland and mountainous areas. Driven by socioeconomic development and government intervention, the level of access to tap water in rural China increased to 70% by 2017. Nevertheless, the rate was considerably lower than that in cities and unevenly distributed across the country. Approximately 90% of drinking water was boiled, an increase from 85% a decade ago. The contribution of electricity, mainly electric kettles, to the boiling of water was 69%. Similar to cooking, living conditions and heating requirements are the main influencing indicators of energy used to boil water. In addition to socioeconomic development, government intervention is a key factor driving the transition to safe water sources, universal access to tap water, and clean energy. Further improvement in drinking water safety in poor and remote rural areas remains challenging, and more intervention and more investment are needed.

Effect of Cd(II) shock loading on performance, microbial enzymatic activity and microbial community in a sequencing batch reactor.

The performance, microbial enzymatic activity and microbial community of a sequencing batch reactor (SBR) were explored under instantaneous Cd(II) shock loading. After a 24-h Cd(II) shock loading of 100 mg/L, the chemical oxygen demand and NH4+-N removal efficiencies decreased significantly from 92.73% and 99.56% on day 22 to 32.73% and 43% on day 24, respectively, and then recovered to the normal values gradually. The specific oxygen utilization rate (SOUR), specific ammonia oxidation rate (SAOR), specific nitrite oxidation rate (SNOR), specific nitrite reduction rate (SNIRR) and specific nitrate reduction rate (SNRR) decreased by 64.81%, 73.28%, 77.77%, 56.84% and 52.46% on day 23 in comparison with the absence of Cd(II) shock loading, respectively, and they gradually returned to the normal levels. The changing trends of their associated microbial enzymatic activities including dehydrogenase, ammonia monooxygenase, nitrite oxidoreductase, nitrite reductase and nitrate reductase were in accordance with SOUR, SAOR, SNOR, SNIRR and SNRR, respectively. Cd(II) shock loading promoted the microbial reactive oxygen species production and lactate dehydrogenase release, indicating that instantaneous shock caused oxidative stress and damaged to cell membranes of the activated sludge. The microbial richness and diversity, and the relative abundance of Nitrosomonas and Thauera obviously decreased under the stress of Cd(II) shock loading. PICRUSt prediction showed that Cd (II) shock loading significantly affected Amino acid biosynthesis, Nucleoside and nucleotide biosynthesis. The present results are conducive to take adequate precautions to reduce the adverse effect on bioreactor performance in wastewater treatment systems.

Reduced attention on restricted organochlorine pesticides, whereas still noteworthy of the impact on the deep soil and groundwater: a historical site study in southern China.

The use of hexachlorocyclohexanes (HCHs) in pesticides has been prohibited for decades in China. Since then, there have been urbanization and transformation of the functional areas of many sites, which were formerly involved in the HCH industry. However, it is possible that, unless properly managed, these sites may still contain HCH residues in the soil and thus pose a threat to the surrounding environment and the quality of groundwater. This study aimed to characterize soil residues in a typical site that was historically involved in HCH production in southern China, by analyzing the α-HCH, ß-HCH, and γ-HCH contents of the soil. The results suggested that HCHs persist in the environment and can have long-term effects. It was found that α-HCH and ß-HCH were present in many samples in concentrations that were comparable or higher than those specified by China's Class 1 screening values. The distribution of residues was significantly correlated with the historical HCH production activities in the areas. The characteristic ratios of α-HCH/γ-HCH and ß-HCH/(α + γ)-HCH at different soil depths were 1.4-3.7 and 0.21-1.04, respectively, which indicated the presence of significant localized residues of HCHs. The presence of HCHs in the soil suggested a downward migration, with concentrations rapidly decreasing in the upper layer soil (0-5 m), but a gradual increase in the deeper soil (5-14 m). HCHs were detected at depths exceeding 24 m, indicating heavy penetration. The proportions of γ-HCH and ß-HCH changed with increasing soil depth, which was related to their relatively volatile and stable molecular structures, respectively. The results strongly suggested that there is widespread contamination of both soil and groundwater by HCHs even after decades. The likelihood of residual HCHs in the soil should therefore be taken into full consideration during urban planning to limit risks to human and environmental health.

Afterglow-Suppressed Lu2O3:Eu3+ Nanoscintillators for High-Resolution and Dynamic Digital Radiographic Imaging.

Lu2(1-x)Eu2xO3 nanoscintillators (x = 0.005, 0.01, 0.03, 0.05, 0.07, and 0.10) with red emission were synthesized by a coprecipitation method. It is found that their photo- and radioluminescence intensities increase with increasing Eu3+ concentration until x = 0.05. According to their concentration-dependent luminescence intensity ratios (I610(C2)/I582(S6)), the existing energy transfer from Eu3+(S6) (occupying S6 sites) to Eu3+(C2) (occupying C2 sites) can be confirmed. Based on the spectral data and density functional theory (DFT) calculations, the origin of Lu2O3:Eu3+ persistent luminescence at low concentration might be related to the tunneling processes between Eu3+ (occupying C2 and S6 sites) and oxygen interstitials (Oi×). After dispersing afterglow-suppressed Lu2O3:Eu3+ nanoscintillators into polymethyl methacrylate (PMMA) polymer-acetone solution, flexible PMMA-Lu2O3:Eu3+ composite films with high thermal stability and radiation resistance were fabricated by a doctor blade method. As the flexible composite film was used as an imaging plate, static X-ray images with high spatial resolution (5.5 lp/mm) under an extremely low dose of ∼1.1 µGyair can be acquired. When a watch with a moving second hand was used as an object, the dynamic X-ray imaging can be realized under a dose rate of 55 µGyair·s-1. Our results demonstrate that Lu2O3:Eu3+ nanoscintillators can be regarded as candidate materials for dynamic digital radiographic imaging.

Newly graduated nurses' stress, coping, professional identity and work locus of control: Results of a cross-sectional study in Shanghai, Hong Kong and Taipei.

AIM: The study aimed to explore and compare stress, coping, professional identity and work locus of control of new graduate nurses among Shanghai, Hong Kong and Taipei. BACKGROUND: The transition from a student to a staff nurse role is recognized as a stressful experience and can be a rough journey. Many newly graduated nurses find it challenging to cope with their new roles in their first few months. METHODS: A cross-sectional research was used in the study. This study was completed in Shanghai, Hong Kong and Taipei with newly graduated nurses working in hospitals. A total of 591 graduate nurses who had worked within 1 year in hospitals were recruited using convenient sampling. Data were collected using a structured questionnaire, including demographics, the occupational stress scale, the Chinese trait coping style questionnaire, the nurse professional identity scale and the work locus of control scale (Chinese version). RESULTS: The newly graduated nurses in Shanghai had significantly lower (p < 0.05) work stress score (2.65 ± 0.67) compared with their counterparts in Hong Kong (2.99 ± 0.69) and Taipei (2.94 ± 0.60). Newly graduated nurses in Shanghai tended to choose positive coping to deal with stressful situations, whereas those in Hong Kong would be more likely to adopt negative attitudes (p < 0.05). The newly graduated nurses in Taipei had the lowest level of professional identity (3.25 ± 0.55, p < 0.05), and their work control tended to be external (46.13 ± 6.20). In contrast, those in Shanghai (52.75 ± 6.04) and Hong Kong (59.41 ± 7.29) tended to be controlled internally. CONCLUSIONS: The study findings revealed the differences among newly graduated nurses in Shanghai, Hong Kong and Taipei with their level of stress, coping, professional identity and work locus of control. Proper leadership, mentoring for newly graduated nurses, and emphasis on first aid nursing training, emotional management and management of stress in newly graduated nurse transition programmes were suggested. IMPLICATIONS FOR NURSING MANAGEMENT: By comparing the results in the three regions, we recommend that nursing managers promote the right leadership style. In addition to coaching, nursing managers can assign additional mentors to newly graduated nurses to help them supplement their clinical knowledge and skills with psychological support. These mentors can come from senior nurses or nursing managers working on less demanding tasks. In addition to the existing post transfer training programmes, new graduate nurses should also focus on emergency nursing training, emotional management training and stress management training.

Feline Interleukin-31 Shares Overlapping Epitopes with the Oncostatin M Receptor and IL-31RA.

Interleukin-31 (IL-31) is a major protein involved in severe inflammatory skin disorders. Its signaling pathway is mediated through two type I cytokine receptors, IL-31RA (also known as the gp130-like receptor) and the oncostatin M receptor (OSMR). Understanding molecular details in these interactions would be helpful for developing antagonist anti-IL-31 monoclonal antibodies (mAbs) as potential therapies. Previous studies suggest that human IL-31 binds to IL-31RA and then recruits OSMR to form a ternary complex. In this model, OSMR cannot interact with IL-31 in the absence of IL-31RA. In this work, we show that feline IL-31 (fIL-31) binds independently with feline OSMR using surface plasmon resonance, an enzyme-linked immunosorbent assay, and yeast surface display. Moreover, competition experiments suggest that OSMR shares a partially overlapping epitope with IL-31RA. We then used deep mutational scanning to map the binding sites of both receptors on fIL-31. In agreement with previous studies of the human homologue, the binding site for IL31-RA contains fIL-31 positions E20 and K82, while the binding site for OSMR comprises the "PADNFERK" motif (P103-K110) and position G38. However, our results also revealed a new overlapping site, composed of positions R69, R72, P73, D76, D81, and E97, between both receptors that we called the "shared site". The conformational epitope of an anti-feline IL-31 mAb that inhibits both OSMR and IL-31RA also mapped to this shared site. Combined, our results show that fIL-31 binds IL-31RA and OSMR independently through a partially shared epitope. These results suggest reexamination of the putative canonical mechanisms for IL-31 signaling in higher animals.

Genome-wide characterization of lncRNAs in acute myeloid leukemia.

Long noncoding RNAs (lncRNAs) are a large family of noncoding RNAs that play a critical role in various normal bioprocesses as well as tumorigenesis. However, the expression patterns and biological functions of lncRNAs in acute leukemia have not been well studied. Here, we performed transcriptome-wide lncRNA expression profiling of acute myeloid leukemia (AML) patient samples, along with non-leukemia control hematopoietic samples. We found that lncRNAs were differentially expressed in AML samples relative to control samples. Notably, we identified that lncRNAs upregulated in AML (relative to the control samples) are associated with a lower degree of DNA methylation and a higher ratio of being bound by transcription factors such as SP1, STAT4, ATF-2 and ELK-1 compared with those downregulated in AML. Moreover, an enrichment of H3K4me3 and a depletion of H3K27me3 were observed in upregulated lncRNAs in AML. Expression patterns of three types of lncRNAs (antisense, enhancer and intergenic lncRNAs) have previously been characterized. Of the identified lncRNAs, we found that high expression level lncRNA LOC285758 is associated with the poor prognosis in AML patients. Furthermore, we found that LOC285758 regulates proliferation of AML cell lines by enhancing the expression of HDAC2, a key factor in carcinogenesis. Collectively, our study depicts a landscape of important lncRNAs in AML and provides novel potential therapeutic targets and prognostic markers for AML treatment.

Type 2 inhibitor leads of human tropomyosin receptor kinase (hTrkA).

In silico virtual screening using the ligand-based ROCS approach and the commercially purchasable compound collection from the ZINC database resulted in the identification of distinctly different and novel acetamide core frameworks with series representatives 1a and 2a exhibiting nanomolar affinity in the kinase domain only hTrkA HTRF biochemical assay. Additional experimental validation using the Caliper technology with either the active or inactive kinase conditions demonstrated the leads, 1a and 2a, to preferentially bind the kinase inactive state. X-ray structural analysis of the kinase domain of hTrkA…1a/2a complexes confirmed the kinase, bind the inhibitor leads in the inactive state and to exhibit a type 2 binding mode with the DFG-out and αC-helix out conformation. The leads also demonstrated sub-micromolar activity in the full length hTrkA cell-based assay and selectivity against the closely related hTrkB isoform. However, the poor microsomal stability and permeability of the leads is suggestive of a multiparametric lead optimization effort requirement for further progression.

Lead identification and characterization of hTrkA type 2 inhibitors.

Virtual in silico structure-guided modeling, followed by in vitro biochemical screening of a subset of commercially purchasable compound collection resulted in the identification of several human tropomyosin receptor kinase A (hTrkA) inhibitors that bind the orthosteric ATP site and exhibit binding preference for the inactive kinase conformation. The type 2 binding mode with the DFG-out and αC-helix out hTrkA kinase domain conformation was confirmed from X-ray crystallographic solution of a representative inhibitor analog, 1b. Additional hTrkA and hTrkB (selectivity) assays in recombinant cells, neurite outgrowth inhibition using rat PC12 cells, early ADME profiling, and preliminary pharmacokinetic evaluation in rodents guided the lead inhibitor progression in the discovery screening funnel.

Pro region engineering of nerve growth factor by deep mutational scanning enables a yeast platform for conformational epitope mapping of anti-NGF monoclonal antibodies.

Nerve growth factor (NGF) plays a central role in multiple chronic pain conditions. As such, anti-NGF monoclonal antibodies (mAbs) that function by antagonizing NGF downstream signaling are leading drug candidates for non-opioid pain relief. To evaluate anti-canine NGF (cNGF) mAbs we sought a yeast surface display platform of cNGF. Both mature cNGF and pro-cNGF displayed on the yeast surface but bound conformationally sensitive mAbs at most 2.5-fold in mean fluorescence intensity above background, suggesting that cNGF was mostly misfolded. To improve the amount of folded, displayed cNGF, we used comprehensive mutagenesis, FACS, and deep sequencing to identify point mutants in the pro-region of canine NGF that properly enhance the folded protein displayed on the yeast surface. Out of 1,737 tested single point mutants in the pro region, 49 increased the amount of NGF recognized by conformationally sensitive mAbs. These gain-of-function mutations cluster around residues A-61-P-26. Gain-of-function mutants were additive, and a construct containing three mutations increased amount of folded cNGF to 23-fold above background. Using this new cNGF construct, fine conformational epitopes for tanezumab and three anti-cNGF mAbs were evaluated. The epitope revealed by the yeast experiments largely overlapped with the tanezumab epitope previously determined by X-ray crystallography. The other mAbs showed site-specific differences with tanezumab. As the number of binding epitopes of functionally neutralizing anti-NGF mAbs on NGF are limited, subtle differences in the individual interacting residues on NGF that bind each mAb contribute to the understanding of each antibody and variations in its neutralizing activity. These results demonstrate the potential of deep sequencing-guided protein engineering to improve the production of folded surface-displayed protein, and the resulting cNGF construct provides a platform to map conformational epitopes for other anti-neurotrophin mAbs.

Self-Healing Properties of Water Tree Damage in Multilayered Shell-Core-Structured Microcapsules/Cross-Linked Polyethylene Composites.

To investigate the effect of the structure of microcapsules on the properties of cross-linked polyethylene (XLPE) composites, three XLPE specimens filled with multilayered shell-core-structured microcapsules are designed. In this paper, the microcapsules are first analyzed morphologically and chemically. In addition, the effect of the microcapsule structure on the typical electrical properties of the composites is explored. Finally, the self-healing ability of XLPE specimens filled with microcapsules is verified. The results show that the SiO2 on the surface of the trilayer shell-core microcapsules can make the microcapsules and the XLPE matrix have a better mechanical interlocking ability, which makes the typical properties of the trilayer shell-core microcapsules slightly better than those of the bilayer shell-core microcapsules. Moreover, when the bilayer shell-core or trilayer shell-core microcapsules rupture under the action of an electric field, the repair material reacts with the water tree under capillary action to consume the residual water while generating organic matter to fill in the cavity, thus repairing the damaged area of the water tree and ultimately achieving the self-healing of the composite water tree.

Self-Healing Properties of Water Tree with Microcapsule/Cross-Linked Polyethylene Composite Material Based on Three-Layer Core-Shell Structure.

To overcome the degradation of insulating properties caused by the water tree aging of cross-linked polyethylene (XLPE), a self-repairing material for XLPE based on a microcapsule system is proposed. Three-layer shell nucleus microcapsules/XLPE composites with different microcapsule doping content are prepared. The water tree aging experiments are carried out using the water-needle electrode method to analyze the ability of microcapsules to repair the damaged areas of water trees. The results show that, compared with the XLPE material without microcapsules, the electrical properties of composites decline significantly when the doping concentration of three-layer shell nucleus microcapsules is large. When the doping concentration is 1.0 wt%, the microcapsule/XLPE composite breakdown strength has no noticeable change, and the dielectric loss factor does not change significantly, the space charge density decreases, and the space charge properties have been improved considerably. When the water tree branch develops to the position where the microcapsules are located, the microcapsules will rupture and release their internal repair materials and catalysts and react with water to produce an organic silicone resin to fill the water tree cavity, which can achieve an excellent self-healing effect. In addition, the nano-SiO2 on the surface microcapsules can make the microcapsules and matrix better integrated, which avoids the microcapsule accumulation that tends to occur when incorporating microcapsules, thus improving the repair rate.

Analysis of Prescription Compliance and Influencing Factors in Cardiac Rehabilitation after Surgery in Children with Congenital Heart Disease Based on Generalized Trust Theory.

AIMS: To understand the compliance, influencing factors, and action path of family cardiac rehabilitation exercise prescriptions for children after congenital heart disease surgery. METHODS AND RESULTS: A random sampling method was used to select 200 pediatric patients and their parents from a pediatric hospital in Shanghai. Among them, 57 cases (28.5%) of children's families followed the cardiac rehabilitation exercise prescription. Path analysis showed that peak oxygen uptake exerted a negative impact on the compliance of family cardiac-rehabilitation prescriptions for patients after congenital heart disease surgery through doctor-patient trust, with a standardized path coefficient of -0.246 (P = 0.001). Disease-related knowledge exerted a positive effect on the compliance of family cardiac-rehabilitation prescriptions for children after congenital heart surgery through doctor-patient trust, with a standardized path coefficient of 0.353 (P < 0.001). The dimension of friend support in social support had a direct positive effect on the compliance of family cardiac-rehabilitation prescriptions for children after cardiac surgery, with a standardized path coefficient of 0.641 (P = 0.006). CONCLUSION: The compliance of cardiac rehabilitation exercise prescription in children with congenital heart disease is not good and is affected by many factors, and there is a complex path relationship between various factors; the kilogram oxygen consumption of the child, the disease-related knowledge of the caregiver, and social support all play important roles in the compliance of the child's family's health prescription. REGISTRATION: SCMCIRB-K2021002-1.

Nanogalvanic Cells Release Highly Reactive Electrons in Tumors to Effectively Eliminate Tumors.

External stimuli triggering chemical reactions in cancer cells to generate highly reactive chemical species are very appealing for cancer therapy, in which external irradiation activating sensitizers to transfer energy or electrons to surrounding oxygen or other molecules is critical for generating cytotoxic reactive species. However, poor light penetration into tissue, low activity of sensitizers, and reliance on oxygen supply restrict the generation of cytotoxic chemical species in hypoxic tumors, which lowers the therapeutic efficacy. Here, this work presents galvanic cell nanomaterials that can directly release highly reactive electrons in tumors without external irradiation or photosensitizers. The released reactive electrons directly react with surrounding biomolecules such as proteins and DNA within tumors to destroy them or react with other surrounding (bio)molecules to yield cytotoxic chemical species to eliminate tumors independent of oxygen. Administering these nanogalvanic cells to mice results in almost complete remission of subcutaneous solid tumors and deep metastatic tumors. The results demonstrate that this strategy can further arouse an immune response even in a hypoxic environment. This method offers a promising approach to effectively eliminate tumors, similar to photodynamic therapy, but does not require oxygen or irradiation to activate photosensitizers.

Polyacrylonitrile as an Efficient Transfer Medium for Wafer-Scale Transfer of Graphene.

The disparity between growth substrates and application-specific substrates can be mediated by reliable graphene transfer, the lack of which currently strongly hinders the graphene applications. Conventionally, the removal of soft polymers, that support the graphene during the transfer, would contaminate graphene surface, produce cracks, and leave unprotected graphene surface sensitive to airborne contaminations. In this work, it is found that polyacrylonitrile (PAN) can function as polymer medium for transferring wafer-size graphene, and encapsulating layer to deliver high-performance graphene devices. Therefore, PAN, that is compatible with device fabrication, does not need to be removed for subsequent applications. The crack-free transfer of 4 in. graphene onto SiO2/Si wafers, and the wafer-scale fabrication of graphene-based field-effect transistor arrays with no observed clear doping, uniformly high carrier mobility (≈11 000 cm2 V-1 s-1), and long-term stability at room temperature, are achieved. This work presents new concept for designing the transfer process of 2D materials, in which multifunctional polymer can be retained, and offers a reliable method for fabricating wafer-scale devices of 2D materials with outstanding performance.

Recent trends in the transfer of graphene films.

Recent years have witnessed advances in chemical vapor deposition growth of graphene films on metal foils with fine scalability and thickness controllability. However, challenges for obtaining wrinkle-free, defect-free and large-area uniformity remain to be tackled. In addition, the real commercial applications of graphene films still require industrially compatible transfer techniques with reliable performance of transferred graphene, excellent production capacity, and suitable cost. Transferred graphene films, particularly with a large area, still suffer from the presence of transfer-related cracks, wrinkles and contaminants, which would strongly deteriorate the quality and uniformity of transferred graphene films. Potential applications of graphene films include moisture barrier films, transparent conductive films, electromagnetic shielding films, and optical communications; such applications call different requirements for the performance of transferred graphene, which, in turn, determine the suitable transfer techniques. Besides the reliable transfer process, automatic machines should be well developed for the future batch transfer of graphene films, ensuring the repeatability and scalability. This mini-review provides a summary of recent advances in the transfer of graphene films and offers a perspective for future directions of transfer techniques that are compatible for industrial batch transfer.

Tunable Adhesion for All-Dry Transfer of 2D Materials Enabled by the Freezing of Transfer Medium.

The real applications of chemical vapor deposition (CVD)-grown graphene films require the reliable techniques for transferring graphene from growth substrates onto application-specific substrates. The transfer approaches that avoid the use of organic solvents, etchants, and strong bases are compatible with industrial batch processing, in which graphene transfer should be conducted by dry exfoliation and lamination. However, all-dry transfer of graphene remains unachievable owing to the difficulty in precisely controlling interfacial adhesion to enable the crack- and contamination-free transfer. Herein, through controllable crosslinking of transfer medium polymer, the adhesion is successfully tuned between the polymer and graphene for all-dry transfer of graphene wafers. Stronger adhesion enables crack-free peeling of the graphene from growth substrates, while reduced adhesion facilitates the exfoliation of polymer from graphene surface leaving an ultraclean surface. This work provides an industrially compatible approach for transferring 2D materials, key for their future applications, and offers a route for tuning the interfacial adhesion that would allow for the transfer-enabled fabrication of van der Waals heterostructures.

Carbonized loofah sponge-based solid-phase extraction of benzo[a]pyrene from fish followed by liquid chromatography-ultraviolet detection.

A simple and sensitive method combining solid-phase extraction (SPE) and high-performance liquid chromatography-ultraviolet detection (HPLC-UV) was developed for the determination of benzo[a]pyrene (BaP) in fish. Loofah sponge (LS) was carbonized and used as an SPE adsorbent. Carbonization decreased the polarity of LS and enhanced its aromaticity. Carbonized loofah sponge (CLS) could capture BaP better through π-π interaction. The carbonization temperature and the SPE conditions were optimized. The linear range of the developed method was within 10-1000 ng g-1 with a satisfactory correlation coefficient (R2) of 0.9999. The limit of detection (LOD) was 2.0 ng g-1, which was below the maximum residue limit (5 µg kg-1) in meat set by the European Union. The method showed good intra-day and inter-day precision with relative standard deviations (RSDs) ranging from 0.4% to 1.7%. Finally, the developed method was applied to the determination of BaP in fish samples. This method is low-cost and environmentally friendly with natural and renewable LS as raw material and it provides an alternative approach for the efficient and simple determination of BaP in aquatic products.