Effects of Ag doping on the electronic and optical properties of CdSe quantum dots.

Cadmium selenide (CdSe) nanocrystals are important photoelectric materials. Doping heterovalent impurities such as silver (Ag) in CdSe nanocrystal quantum dots (QDs) can provide additional charge carriers, which can significantly enhance the performance of CdSe QDs for their potential applications in high-efficiency photovoltaic devices. Using density functional theory (DFT) based calculations with the Heyd-Scuseria-Ernzerhof (HSE06) screened hybrid functional, we demonstrate that Ag doping can affect the structural, electronic and optical properties of CdSe QDs significantly. The location and number of Ag dopant atoms are critical factors for modifying the electronic structure, in particular the change of energy position and shape of the valence and conduction band edges. It is found that doping of Ag atoms into the core region of a CdSe nanoparticle induces metallic-like electronic characteristics with a dense number of electrons emerging at the Fermi level. However, incorporation of Ag dopant into the surface of a CdSe quantum dot introduces some mid-gap states that mainly consist of Se 4p states, and results in a new sub-bandgap electronic transition from mid-gap states to the conduction band. The calculated absorption spectra indicate that doping of just one or two Ag atoms greatly strengthens the absorption in the ultraviolet-visible regime and extends the absorption edges of CdSe QDs into the infrared regime. In particular, the spectra show a high-intensity absorption band between 424 and 600 nm with just 1 Ag atom incorporated into the CdSe QDs. Based on the improved absorption spectra, the present results provide a science-based strategy for designing Ag-doped CdSe QDs with enhanced visible light absorption for their application in high-efficiency photovoltaic devices.

Engineering the electronic and magnetic properties of d(0) 2D dichalcogenide materials through vacancy doping and lattice strains.

We have systematically investigated the effects of different vacancy defects in 2D d(0) materials SnS2 and ZrS2 using first principles calculations. The theoretical results show that the single cation vacancy and the vacancy complex like V-SnS6 can induce large magnetic moments (3-4 µB) in these single layer materials. Other defects, such as V-SnS3, V-S, V-ZrS3 and V-ZrS6, can result in n-type conductivity. In addition, the ab initio studies also reveal that the magnetic and conductive properties from the cation vacancy and the defect complex V-SnS6 can be modified using the compressive/tensile strain of the in-plane lattices. Specifically, the V-Zr doped ZrS2 monolayer can be tuned from a ferromagnetic semiconductor to a metallic/half-metallic material with decreasing/increasing magnetic moments depending on the external compressive/tensile strains. On the other hand, the semiconducting and magnetic properties of V-Sn doped SnS2 is preserved under different lattice compression and tension. For the defect complex like V-SnS6, only the lattice compression can tune the magnetic moments in SnS2. As a result, by manipulating the fabrication parameters, the magnetic and conductive properties of SnS2 and ZrS2 can be tuned without the need for chemical doping.

Theoretical prediction of long-range ferromagnetism in transition-metal atom-doped d0 dichalcogenide single layers SnS2 and ZrS2.

We have systematically investigated the effects of transition-metal (TM) atom (Sc-Zn) doping in 2D d0 materials SnS2 and ZrS2via the density functional theory method. Our results demonstrate that the conductivity and magnetism of SnS2 and ZrS2 can be engineered to spin-polarize half-metal/metal with appropriate TM dopants. For both materials, nontrivial magnetic interactions can be induced by V/Cr/Mn/Fe/Co doping. Specifically, the various behaviors of the magnetic exchanges in TM-doped SnS2 and ZrS2 are due to the competition between the super-exchange, the double exchange, and the p-d exchange interactions, which are dependent on the dopants' chemistry and spatial positions. Thus, our results give potential guidance for future experiments to create functionalized d0 nano-electronic devices.

Functionalization of a GaSe monolayer by vacancy and chemical element doping.

Based on first-principles plane-wave calculations, functionalization of the two-dimensional single-layered GaSe structure through vacancy and chemical element doping has been investigated. Our calculations show that the pristine GaSe monolayer, which is normally a non-magnetic, indirect-band-gap semiconductor, can induce net magnetic moments by introduction of Ga mono-vacancy, Ga di-vacancy, and GaSe3 and Ga2Se6 vacancy complexes. Magnetic moments can also be induced by selectively doping specific transition-metal atoms as well as A group atoms. The introduced donor or acceptor states are localized in the band gap, which expands the utilization of the single-layered GaSe in nanoelectronics and spintronics. In spite of the intrinsic p-type character of the two-dimensional GaSe material, substitution of Si for Ga and substitution of Cl for Se exhibit n-type character at relatively low dopant concentrations. These findings will provide useful supplements to the experimental studies on the newly synthesized two-dimensional layered metal monochalcogenides, which allows us to go beyond the current scope that is limited to applications within graphene, BN, and transition-metal dichalcogenide-based nanostructures.

Effects of γ-ray irradiation on optical absorption and laser damage performance of KDP crystals containing arsenic impurities.

The effects of γ-irradiation on potassium dihydrogen phosphate crystals containing arsenic impurities are investigated with different optical diagnostics, including UV-VIS absorption spectroscopy, photo-thermal common-path interferometer and photoluminescence spectroscopy. The optical absorption spectra indicate that a new broad absorption band near 260 nm appears after γ-irradiation. It is found that the intensity of absorption band increases with the increasing irradiation dose and arsenic impurity concentration. The simulation of radiation defects show that this absorption is assigned to the formation of AsO44⁻ centers due to arsenic ions substituting for phosphorus ions. Laser-induced damage threshold test is conducted by using 355 nm nanosecond laser pulses. The correlations between arsenic impurity concentration and laser induced damage threshold are presented. The results indicate that the damage performance of the material decreases with the increasing arsenic impurity concentration. Possible mechanisms of the irradiation-induced defects formation under γ-irradiation of KDP crystals are discussed.

Electronic and magnetic properties of substituted BN sheets: a density functional theory study.

Using density functional calculations, we investigate the geometries, electronic structures and magnetic properties of hexagonal BN sheets with 3d transition metal (TM) and nonmetal atoms embedded in three types of vacancies: V(B), V(N), and V(B+N). We show that some embedded configurations, except TM atoms in V(N) vacancy, are stable in BN sheets and yield interesting phenomena. For instance, the band gaps and magnetic moments of BN sheets can be tuned depending on the embedded dopant species and vacancy type. In particular, embedment such as Cr in V(B+N), Co in V(B), and Ni in V(B) leads to half-metallic BN sheets interesting for spin filter applications. From the investigation of Mn-chain (C(Mn)) embedments, a regular 1D structure can be formed in BN sheets as an electron waveguide, a metal nanometre wire with a single atom thickness.

Electronic and magnetic properties of C-adsorbed graphene: a first-principles study.

Using density functional theory, we consider the adsorption of C on graphene, which gives rise to many interesting phenomena. A single-C at the bridge site shows a clearly covalent-bond feature with graphene, in which the metallic state occurs and a magnetic moment of 0.36 µ(B) was determined. For both-sided adsorption, the magnetic moment is remarkably larger than that in one-sided adsorption, and increases with concentration up to a coverage of 12.5%. High spin polarization obtained at the Fermi level indicates a high degree of passage of preferred spin, which is important for developing spin filters.

Ab initio study of stability and migration of H and He in hcp-Sc.

Ab initio calculations based on density functional theory have been performed to determine the relative stabilities and migration of H and He atoms in hcp-Sc. The results show that the formation energy of an interstitial H or He atom is smaller than that of a corresponding substitutional atom. The tetrahedral (T) interstitial position is more stable than an octahedral (O) position for both He and H interstitials. The nudged elastic band method has been used to study the migration of interstitial H and He atoms in hcp-Sc. It is found that the migration energy barriers for H interstitials in hcp-Sc are significantly different from those for He interstitials, but their migration mechanisms are similar. In addition, the formation energies of five different configurations of a H-H pair were determined, revealing that the most stable configuration consists of two H atoms located at the second-neighbor tetrahedral interstitial sites along the hexagonal direction. The formation and relative stabilities of some small He clusters have also been investigated.

Quantum theory for cold avalanche ionization in solids.

A theory of photon-assisted impact ionization in solids is presented. Our theory makes a quantum description of the new impact ionization-cold avalanche ionization recently reported by P. P. Rajeev, M. Gertsvolf, P. B. Corkum, and D. M. Rayner [Phys. Rev. Lett. 102, 083001 (2009)]. The present theory agrees with the experiments and can be reduced to the traditional impact ionization expression in the absence of a laser.

Electronic and magnetic properties of metal-doped BN sheet: A first-principles study.

The electronic and magnetic properties of a BN sheet doped with 3d transition metals (Fe, Co and Ni) have been investigated using ab initio calculations. Our calculations show many interesting physical properties in a metal-doped BN sheet. A Fe-doped BN sheet is a half-metal with the magnetic moment of 2.0 micro(B), and Co-doped BN sheet becomes a narrow-gap semiconductor with a magnetic moment of 1.0 micro(B). However, no magnetic moment is induced on a Ni-doped BN sheet, which has the same band gap as a pristine BN sheet. Furthermore, Fe atom easily forms an isolated particle on the BN sheet, while Ni and Co atoms are likely to form a sheet-supported metal nanotemplate. These results are useful for spintronics application and could help in the development of magnetic nanotructures and metallic nanotemplate at room temperature.

Effects of stacking periodicity on the electronic and optical properties of GaAs/AlAs superlattice: a first-principles study.

The effects of stacking periodicity on the electronic and optical properties of GaAs/AlAs superlattice have been explored by density functional theory calculations. Among the (GaAs)m/(AlAs)m, (GaAs)1/(AlAs)m and (GaAs)m/(AlAs)1 (m = 1 to 5) superlattices, the band gaps of (GaAs)m/(AlAs)1 superlattices decrease significantly as the layer of GaAs increases, and the cut-off wavelengths are found to locate in the near infrared region. For (GaAs)m/(AlAs)1 SLs, the conduction bands shift toward Fermi level, resulting in the smaller band gap, while conduction bands of (GaAs)1/(AlAs)n SLs slightly shift to higher energy, which lead to comparable band gaps. The layer number of GaAs shows negligible effects on the reflectivity spectra of superlattice structures, while the absorption coefficient shows a red-shift with the increasing layer of GaAs, which is beneficial for the application of GaAs/AlAs superlattice in the field of near infrared detector. These results demonstrate that controlling the number of GaAs layers is a good method to engineer the optoelectronic properties of GaAs/AlAs superlattice.

Integrated sensing layer of bacterial cellulose and polyethyleneimine to achieve high sensitivity of ST-cut quartz surface acoustic wave formaldehyde gas sensor.

Surface acoustic wave (SAW)-based formaldehyde gas sensor using bi-layer nanofilms of bacterial cellulose (BC) and polyethyleneimine (PEI) was developed on an ST-cut quartz substrate using sol-gel and spin coating processes. BC nanofilms significantly improve the sensitivity of PEI films to formaldehyde gas, and reduces response and recovery times. The BC films have superfine filamentary and fibrous network structures, which provide a large number of attachment sites for the PEI particles. Measurement results obtained using in situ diffuse reflectance Fourier transform infrared spectroscopy showed that the primary amino groups of PEI strongly adsorb formaldehyde molecules through nucleophilic reactions, thus resulting in a negative frequency shift of the SAW sensor due to the mass loading effect. In addition, experimental results showed that the frequency shifts of the SAW devices are determined by thickness of PEI film, concentration of formaldehyde and relative humidity. The PEI/BC sensor coated with three layers of PEI as the sensing layer showed the optimal sensing performance, which had a frequency shift of 35.6 kHz for 10 ppm formaldehyde gas, measured at room temperature and 30 % RH. The sensor also showed good selectivity and stability, with a low limit of detection down to 100 ppb.

Ab initio molecular dynamics simulation of a pressure induced zinc blende to rocksalt phase transition in SiC.

The high-pressure induced phase transformation from the zinc blende to rocksalt structure in SiC has been studied by the ab initio molecular dynamics method. The simulations showed that SiC passes through a tetragonal intermediate state before transforming to a monoclinic phase at 160 GPa. The mechanism for this phase transformation agrees well with recent ab initio MD simulations, in which the applied pressure was as high as ∼600 GPa, but in the present study the transformation occurs at much lower pressure.

A comparative study of low energy radiation response of AlAs, GaAs and GaAs/AlAs superlattice and the damage effects on their electronic structures.

In this study, the low energy radiation responses of AlAs, GaAs and GaAs/AlAs superlattice are simulated and the radiation damage effects on their electronic structures are investigated. It is found that the threshold displacement energies for AlAs are generally larger than those for GaAs, i.e., the atoms in AlAs are more difficult to be displaced than those in GaAs under radiation environment. As for GaAs/AlAs superlattice, the Ga and Al atoms are more susceptible to the radiation than those in the bulk AlAs and GaAs, whereas the As atoms need comparable or much larger energies to be displaced than those in the bulk states. The created defects are generally Frenkel pairs, and a few antisite defects are also created in the superlattice structure. The created defects are found to have profound effects on the electronic properties of GaAs/AlAs superlattice, in which charge transfer, redistribution and even accumulation take place, and band gap narrowing and even metallicity are induced in some cases. This study shows that it is necessary to enhance the radiation tolerance of GaAs/AlAs superlattice to improve their performance under irradiation.

A comparative study of the mechanical and thermal properties of defective ZrC, TiC and SiC.

ZrC and TiC have been proposed to be alternatives to SiC as fuel-cladding and structural materials in nuclear reactors due to their strong radiation tolerance and high thermal conductivity at high temperatures. To unravel how the presence of defects affects the thermo-physical properties under irradiation, first-principles calculations based on density function theory were carried out to investigate the mechanical and thermal properties of defective ZrC, TiC and SiC. As compared with the defective SiC, the ZrC and TiC always exhibit larger bulk modulus, smaller changes in the Young's and shear moduli, as well as better ductility. The total thermal conductivity of ZrC and TiC are much larger than that of SiC, implying that under radiation environment the ZrC and TiC will exhibit superior heat conduction ability than the SiC. One disadvantage for ZrC and TiC is that their Debye temperatures are generally lower than that of SiC. These results suggest that further improving the Debye temperature of ZrC and TiC will be more beneficial for their applications as fuel-cladding and structural materials in nuclear reactors.

Ab initio molecular dynamics simulation of low energy radiation responses of α-Al2O3.

In this study, an ab initio molecular dynamics method is employed to investigate the response behavior of α-Al2O3 to low energy irradiation. Different from the previous experiments, our calculations reveal that the displacements of oxygen dominate under electron irradiation and the created defects are mainly oxygen vacancy and interstitial. The experimental observation of the absorption peaks appearing at 203, 233 and 256 nm for α-Al2O3 under electron irradiations should be contributed by the oxygen defects and these defects will reduce the transmittance of α-Al2O3, which agrees well with the very recent experiment. This study demonstrates the necessity to reinvestigate the threshold displacement energies of α-Al2O3, and to introduce recombination center for oxygen defects to improve its optical properties and performance under radiation environment.

Impact of isovalent and aliovalent substitution on the mechanical and thermal properties of Gd2Zr2O7.

In this study, a density functional theory method is employed to investigate the effects of isovalent and aliovalent substitution of Sm3+ on the phase stability, thermo-physical properties and electronic structure of Gd2Zr2O7. It is shown that the isovalent substitution of Sm3+ for Gd3+ results in the formation of Gd2Zr2O7-Sm2Zr2O7 solid solution, which retains the pyrochlore structure and has slight effects on the elastic moduli, ductility, Debye temperature and band gap of Gd2Zr2O7. As for the aliovalent substitution of Sm3+ for Zr4+ site, a pyrochlore-to-defect fluorite structural transition is induced, and the mechanical, thermal properties and electronic structures are influenced significantly. As compared with the Gd2Zr2O7, the resulted Gd2SmyZr2-yO7 compositions have much smaller elastic moduli, better ductility and smaller Debye temperature. Especially, an amount of electrons distribute on the fermi level and they are expected to have larger thermal conductivity than Gd2Zr2O7. This study suggests an alternative way to engineer the thermo-physical properties of Gd2Zr2O7 and will be beneficial for its applications under stress and high temperature.

Magnetic interaction in Co-doped SnO(2) nano-crystal powders.

Rutile-type Co-doped SnO(2) nano-crystal powders are prepared by the wet chemical method. The magnetic moment is found to decrease with increasing Co content. There is hysteresis between field cooled (FC) and zero field cooled (ZFC) magnetization when the temperature is below 70 K. These magnetic behaviours represent antiferromagnetic interaction between Co ions. By measuring the magnetization as a function of temperature, the magnetic interaction between Co ions is evaluated qualitatively using the Curie-Weiss law. The value of the effective exchange integral J(1)/k(B) is about -62 K, indicating a very strong antiferromagnetic superexchange interaction between Co ions.

Ab initio molecular dynamics simulation of the effects of stacking faults on the radiation response of 3C-SiC.

In this study, an ab initio molecular dynamics method is employed to investigate how the existence of stacking faults (SFs) influences the response of SiC to low energy irradiation. It reveals that the C and Si atoms around the SFs are generally more difficult to be displaced than those in unfaulted SiC, and the corresponding threshold displacement energies for them are generally larger, indicative of enhanced radiation tolerance caused by the introduction of SFs, which agrees well with the recent experiment. As compared with the unfaulted state, more localized point defects are generated in faulted SiC. Also, the efficiency of damage production for Si recoils is generally higher than that of C recoils. The calculated potential energy increases for defect generation in SiC with intrinsic and extrinsic SFs are found to be higher than those in unfaulted SiC, due to the stronger screen-Coulomb interaction between the PKA and its neighbors. The presented results provide a fundamental insight into the underlying mechanism of displacement events in faulted SiC and will help to advance the understanding of the radiation response of SiC with and without SFs.

Electronic excitation induced amorphization in titanate pyrochlores: an ab initio molecular dynamics study.

The response of titanate pyrochlores (A2Ti2O7, A = Y, Gd and Sm) to electronic excitation is investigated utilizing an ab initio molecular dynamics method. All the titanate pyrochlores are found to undergo a crystalline-to-amorphous structural transition under a low concentration of electronic excitations. The transition temperature at which structural amorphization starts to occur depends on the concentration of electronic excitations. During the structural transition, O2-like molecules are formed, and this anion disorder further drives cation disorder that leads to an amorphous state. This study provides new insights into the mechanisms of amorphization in titanate pyrochlores under laser, electron and ion irradiations.