Temperature and time dependence on ZnS microstructure and phases obtained through hydrothermal decomposition of diethyldithiocarbamate complexes.

Zinc sulphide was obtained through hydrothermal decomposition of [Zn(S2CNEt2)] under different experimental conditions such as temperatures and reaction times. Hydrothermal reactions were carried out in a stainless steel autoclave at 160, 180 and 200 °C for 3, 6 and 24 hours. The obtained products were characterized using X-ray diffraction, scanning and high resolution transmission electron microscopies. Particle size and microstrain were determined by Rietveld refinement of experimental X-ray diffraction patterns. The obtained crystal size values were in the range of 6.1 to 30 nm and as the temperature and reaction times increase the particle size also increases. Band gap values are in the range of 3.34 to 3.60 eV and are highly dependent on the crystal microstrain. The catalyst activities were studied through the degradation of methylene blue dye solutions under ultraviolet radiation.

Bismuth sulphides prepared by thermal and hydrothermal decomposition of a single source precursor: the effect of reaction parameters on morphology, microstructure and catalytic activity.

Bismuth sulphides were prepared by thermal and hydrothermal decomposition of a precursor, bismuth tris-diethyldithiocarbamate, at different temperatures and times. The obtained results showed that the thermal decomposition of the precursor in a tube furnace was not very appropriate to control particle size and morphology. XRD results showed that at 310 °C the precursor was not fully decomposed but at 500 °C besides the orthorhombic bismuth sulphide, the metallic bismuth also started to be formed. At the highest temperature 1D crystals were formed with an apparent mean crystal size of 138 nm. However, hydrothermal decomposition was shown to be a very suitable method to control particle size and morphology just by varying some parameters such as temperature and time. For 6 hours reaction time, as temperature increased, the apparent mean crystal size decreased. The particle morphology was also very affected by this parameter, at 180 °C only 1D particles (nanorods) with lengths varying from 25 to 4700 nm were formed but at 200 °C not only 1D particles but also 2D particles were (nanosheets) obtained. Bismuth sulphide particles obtained at 180 °C and 24 hours reaction time were shown to be formed mostly by 2D particles compared to those obtained at 6 hours. It was clearly seen that the increase in reaction time and temperature led to the formation of bi-dimensional particles. The presence of 1D crystals in the samples obtained by hydrothermal decomposition at 180 °C/6 h and 180 °C/24 h is responsible for their high catalytic efficiency towards methylene blue dye degradation.

Organogold(III)-dithiocarbamate compounds and their coordination analogues as anti-tumor and anti-leishmanial metallodrugs.

The limited chemical stability of gold(III)-based compounds in physiological environment has been a challenge in drug discovery, and organometallic chemistry might provide the solution to overcome this issue. In this work, four novel cationic organogold(III)-dithiocarbamate complexes of general structure [(C^N)AuIIIDTC]PF6 (C1a - C4a, DTC = dithiocarbamate, L1 - L4, C^N = 2-anilinopyridine) are presented, and compared to their coordination gold(III)-dithiocarbamate analogues [AuIIIDTCCl2] (C1b - C4b), as potential anti-cancer and anti-leishmanial drugs. Most of the complexes effectively inhibited cancer cell growth, notably C3a presented anti-proliferative effect in the nanomolar range against breast cancer (MCF-7 and MDA-MB-231 cells with moderate selectivity. Pro-apoptotic studies on treated MCF-7 cells showed a high population of cells in early apoptosis. Reactivity studies of C3a towards model thiols (N-acetyl-L-cysteine) refer to a possible mode of action involving bonding between the organogold(III)-core and the thiolate. In the scope of neglected diseases, gold complexes are emerging as promising therapeutic alternatives against leishmaniasis. In this regard, all gold(III)-dithiocarbamate complexes presented anti-leishmanial activity against at least one Leishmania species. Complexes C1a, C4a, C1b, C4b were active against all tested parasites with IC50 values varying between 0.12 and 42 µM, and, overall, organometallic compounds presented more intriguing inhibition profiles. For C4a selectivity over 500-fold for L. braziliensis; even higher than the reference anti-leishmanial drug amphotericin B. Overall, our findings revealed that the organogold(III) moiety significantly amplified the anti-cancer and anti-leishmanial effects with respect to the coordination analogues; thus, showing the great potential of organometallic chemistry in metallodrug-based chemotherapy for cancer and leishmaniasis.

Catalysts of Cu(II) and Co(II) ions adsorbed in chitosan used in transesterification of soy bean and babassu oils - a new route for biodiesel syntheses.

Catalysts of Cu(II) and Co(II) adsorbed in chitosan was used in transesterification of soy bean and babassu oils. The catalysts were characterized by infrared, atomic absorption and TG, and biodiesels was characterized by infrared, NMR, CG, TG, physic chemistry analysis. The maximum adsorption values found for copper and cobalt cations were 1.584 and 1.260mgg(-1), respectively, in 180min. However, conversion of oils in biodiesel was better when used Co(II) adsorbed in chitosan.