Electropolymerization of Preferred-Oriented Conjugated Microporous Polymer Films for Enhanced Fluorescent Sensing.

High-quality conjugated microporous polymer (CMP) films with orientation and controlled structure are extremely desired for applications. Here, we report the effective construction of CMP 3D composite films (pZn/PTPCz) with a controlled porosity structure and preferred orientation using the template-assisted electropolymerization (EP) approach for the first time. The structure of pZn/PTPCz composite thin films and nitrophenol sensing performance were thoroughly studied. When compared to the control CMP film made on flat indium tin oxide (ITO) substrates, the as-prepared pZn/PTPCz composite films showed significantly enhanced fluorescent intensity and much better sensing performance for the model explosive. This was attributed to the metal-enhanced fluorescence (MEF) of porous nanostructured zinc (pZn) and the additional macroporosity of the pZn/PTPCz composite films. This work provides a feasible approach for creating oriented 3D CMP-based thin films for advanced applications.

Hazardous 2,4,6-Trinitrophenol (TNP) Detection in Water by Amine and Azine Functionalized Metal-Organic Framework.

A Zn(II)-based metal-organic framework (MOF) decorated with amine and azine functionalities, TMU-17-NH2 (formulated as [Zn(H2ata)(L)].2DMF; L = 1,4-bis(4-pyridyl)-2,3-diaza-2,3-butadiene and H2ata = 2-aminoterephthalic acid) has been successfully synthesized via a solvothermal method. According to crystallographic studies, the synthesized TMU-17-NH2 has three dimensional cuboidal structure with the pore surface decorated with free amine (-NH2) and azine (= N-N =) functional groups. The photoluminescence investigations proved that the synthesized MOF can be effectively utilized for selective detection of 2,4,6-trinitrophenol (TNP) in water with an apparent turn-off quenching response. Its limits of detection (LOD) for TNP was 9.4 ppb and competitive nitro explosive testing confirmed its higher selectivity towards TNP (over other nitro explosives). Calculations based on density functional theory (DFT) and spectrum overlap were utilized to evaluate the sensing mechanisms. This MOF-based fluorescence sensing technique for TNP had a high sensitivity (Ksv = 3.26 × 104 M-1).

The Failure of Molecular Imprinting in Conducting Polymers: A Case Study of Imprinting Picric Acid on Polycarbazole.

The aims of this study were to investigate the potential of utilising molecularly imprinted polycarbazole layers to detect highly toxic picric acid (PA) and to provide information about their performance. Quantum chemical calculations showed that strong interactions occur between PA and carbazole (bond energy of approximately 31 kJ/mol), consistent with the theoretical requirements for effective molecular imprinting. The performance of the sensors, however, was found to be highly limited, with the observed imprinting factor values for polycarbazole (PCz) layers being 1.77 and 0.95 for layers deposited on Pt and glassy carbon (GC) electrodes, respectively. Moreover, the molecularly imprinted polymer (MIP) layers showed worse performance than unmodified Pt or GC electrodes, for which the lowest limit of detection (LOD) values were determined (LOD values of 0.09 mM and 0.26 mM, respectively, for bare Pt and MIP PCz/Pt, as well as values of 0.11 mM and 0.57 mM for bare GC and MIP PCz/GC). The MIP layers also showed limited selectivity and susceptibility to interfering agents. An initial hypothesis on the reasons for such performance was postulated based on the common properties of conjugated polymers.

Experimental and Theoretical Studies of Fluorescent "Turn Off" Sensor Functionalized With Carboxylic Acid and Naphthalene Group for Selective Detection of 2,4,6-Trinitrophenol.

A fluorescent sensor, 5-((2-hydroxynaphthalen-1-yl)methyleneamino)benzene-1,3-dicarboxylic acid (coded as SB), containing both π-π interacting sites (such as π-electron-rich moieties) and hydrogen bonding (H-bonding) interacting sites (such as highly acidic protons) has been developed via high yield reflux method. It was characterized by the various analytical techniques such as Fourier transform-infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (1 H-NMR), thermogravimetric analysis (TGA), field emission scanning electron microscope (Fe-SEM), elemental mapping, and UV - visible spectroscopy etc. The spectral response of the as-synthesized SB sensor has been investigated for various nitro explosives (NEs). It has been found that the SB sensor selectively and sensitive sense highly toxic 2,4,6-trinitrophenol (TNP) via the "turn-off" quenching response. Its limit of detection for TNP was calculated to be 30 ppb. Spectral overlap, detailed mechanistic studies for their mode of action, and density functional theory (DFT) calculations reveals that photo-induced electron transfer process (PET), fluorescence energy transfers process (FRET), and electrostatic interactions (i.e. H-bonding) are the key factors for the turn-off response of SB towards TNP. Notably, the synthesis of the sensor is cost-effective, energy efficient, and economic.

Novel SnO2@Cu3(BTC)2 Composites as a Highly Efficient Photocatalyst and Fluorescent Sensor.

A novel SnO2@Cu3(BTC)2 composite was synthesized using a quick and affordable bottom-up approach via impregnation of SnO2 nanoparticles into the porous Cu3(BTC)2 metal-organic framework (MOF). This composite material is characterized by Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD) spectra, scanning electron microscope (SEM) analysis, and energy-dispersive X-ray spectroscopy (EDS) analysis. SnO2@Cu3(BTC)2 degraded the methylene blue (MB) dye within 80 min under sunlight with a maximum degradation efficiency of 85.12%. This composite easily recyclable up to five cycles with the retention of its MB degradation efficiency. Moreover, SnO2@Cu3(BTC)2 can be also used efficiently for fast sensing of 2,4,6-trinitrophenol (TNP) in water with noticeable turn-off quenching response. Its limits of detection (LOD) for TNP was 2.82 µM with enhanced selectivity toward TNP (over other NACs) as verified by competitive nitro explosive tests. Density functional theory (DFT) calculations and spectral overlap were used to assess the sensing mechanism. This composite fluorescent sensing system for TNP are demonstrated to have high selectivity and sensitivity. Our findings imply that the prepared low cost SnO2@Cu3(BTC)2 composite can be used as a superior fluorescence sensor and photo catalyst for large scale industrial applications.

Further Develop 1,3,4-Thiadiazole Based Probe to Effectively Detect 2,4,6-Trinitrophenol with the Help of DFT Calculations.

Four fluorimetric probes had been developed to rapidly detect 2,4,6-trinitrophenol (TNP). They were designed and synthesized on the basis of 1,3,4-thiadiazole framework combining calculation with experiment. Among them, SK-1 displayed strong blue emission with fluorescence quantum yield as high as 63.6% in solution. Further evaluation demonstrated that SK-1 displays good selectivity and high sensitivity for rapid and visual detection of TNP. It brought significant changes in both colour and fluorescence emission spectrum. The detection limit was as low as 38 nM. Quenching mechanism was confirmed as photo-induced electron transfer (PET) by nuclear magnetic titration and DFT calculations. What's more, application in real water samples and solid phase paper tests illustrated the practical significance of detection of TNP in both vapor and solution.

Recent advances in process engineering and upcoming applications of metal-organic frameworks.

Progress in metal-organic frameworks (MOFs) has advanced from fundamental chemistry to engineering processes and applications, resulting in new industrial opportunities. The unique features of MOFs, such as their permanent porosity, high surface area, and structural flexibility, continue to draw industrial interest outside the traditional MOF field, both to solve existing challenges and to create new businesses. In this context, diverse research has been directed toward commercializing MOFs, but such studies have been performed according to a variety of individual goals. Therefore, there have been limited opportunities to share the challenges, goals, and findings with most of the MOF field. In this review, we examine the issues and demands for MOF commercialization and investigate recent advances in MOF process engineering and applications. Specifically, we discuss the criteria for MOF commercialization from the views of stability, producibility, regulations, and production cost. This review covers progress in the mass production and formation of MOFs along with future applications that are not currently well known but have high potential for new areas of MOF commercialization.

Facile Microwave-Assisted Synthesis of Functionalized Carbon Nitride Quantum Dots as Fluorescence Probe for Fast and Highly Selective Detection of 2,4,6-Trinitrophenol.

Functionalized carbon nitride quantum dots (CNQDs) are fabricated by moderate carbonization of L-tartaric acid and urea in oil acid media by a facile microwave-assisted solvothermal method. The obtained CNQDs are monodispersed with a narrow size distribution (average size of 3.5 nm), and exhibit excellent selectivity and sensitivity of fluorescence quenching for 2,4,6-trinitrophenol (TNP) with a quenching efficiency coefficient Ksv of 4.75 × 104 M-1. This sensing system exhibits a fast response time within 1 min and a wide linear response range from 0.1 to 15 µM. The limit of detection is as low as 87 nM, which is comparable or lower than the other probes. The application of the developed probe to the detection of TNP in spiked water samples yields satisfactory results. The mechanism of fluorescence quenching is also discussed. Graphical Abstract An optical sensor based on functionalized carbon nitride quantum dots (CNQDs) were fabricated from L-tartaric acid and urea by a facile one-pot microwave-assisted solvothermal method, and were effectively utilized to the detection of 2,4,6-trinitrophenol (TNP) based on fluorescence (FL) quenching.

Synthesis of Copper Metal Organic Framework Based on Schiff Base Tricarboxylate Ligand for Highly Selective and Sensitive Detection of 2,4,6-Trinitrophenol in Aqueous Medium.

By using Schiff base tricarboxylate ligand 5-(4-carboxybenzylideneamino)isophthalic acid (H3CIP), a new imine functionalized copper metal organic framework (MOF) has been synthesized solvothermally. It was fully characterized by Fourier Transform Infrared (FTIR) Spectroscopy, Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS), and elemental mapping techniques. The as-synthesized MOF has been utilized as fluorescent probe for detection of nitro aromatic explosives (NAEs). The results show that the copper MOF can be developed into highly selective and sensitive sensor for detection of TNP in the aqueous medium via the "turn-off" quenching response. The linear fitting of the Stern-Volmer plot for TNP offered large quenching constant of 1.07 × 104 M-1 for Cu-MOF indicating the high sensitivity of the sensing process. Outstanding sensitivity of prepared material towards TNP detection was further validated by the low detection limit of 80 ppb (0.35 µM). The detailed mechanistic studies for their mode of action and density functional theory (DFT) calculations reveals that photo-induced electron transfer (PET) and fluorescence resonance energy transfer (FRET) processes, as well as electrostatic interactions (i.e. H-bonding) are the key factors for the turn-off response toward TNP by this fluorescent sensor. Thus, this new LMOF owing to their high water stability and remarkable functional features are potential candidates which can be developed into selective and sensitive TNP detection devices.

Aerobic degradation of 2,4,6-trinitrophenol by Proteus sp. strain OSES2 obtained from an explosive contaminated tropical soil.

A 2,4,6-trinitrophenol (TNP) degrading bacterial strain isolated from a site polluted with explosives was identified as Proteus sp. strain OSES2 via 16S rRNA gene sequencing. Metabolic investigation showed that the organism grew exponentially on 100 mg l-1 of TNP as a source of carbon, nitrogen, and energy. In addition, the growth of the organism was sustainable on 3-nitrotoluene, 2,4-dinitrotoluene, 2,4,6-trinitrotoluene, 4-nitrophenol, methyl-3-nitrobenzoate, 4-nitroaniline, aniline and nitrobenzene. Strain OSES2 was able to utilize TNP within a concentration range of 100 mg l-1 to 500 mg l-1. The specific growth rate and degradation rates on TNP were 0.01043 h-1 and 0.01766 mg l-1 h-1 respectively. Effective degradation of TNP in a chemically defined medium was evident with a gradual reduction in the concentration of TNP concomitant with an increase in cell density as well as the substantial release of ammonium (NH4+), nitrite (NO2-), and nitrate (NO3-) as metabolites in 96 h. Degradation competence of the organism was enhanced in the presence of starch and acetate. On starch-supplemented TNP, the highest specific growth rate and degradation rates were 0.02634 h-1 and 0.04458 mg l-1 h-1, respectively, while the corresponding values on acetate were 0.02341 h-1 and 0.02811 mg l-1 h-1. However, amendment with nitrogen sources yielded no substantial improvement in degradation. TNP was utilized optimally at pH 7 to 9 and within the temperature range of 30 °C to 37 °C. The enzyme hydride transferase II [HTII], encoded by the npdI gene which is the first step involved in the TNP degradation pathway, was readily expressed by the isolate thus suggesting that substrate was utilized through the classical metabolic pathway.

Fluorescent nucleotide-lanthanide nanoparticles for highly selective determination of picric acid.

A new method based on coordination polymer nanoparticles (CPNs) derived from nucleotides and Tb3+ ions (GMP/Tb) for the selective and sensitive determination of aqueous 2,4,6-trinitrophenol (TNP) (picric acid) is established. The fluorescence of GMP/Tb nanoparticles is effectively quenched by TNP via photo-induced charge transfer (PCT), thus achieving its selectivity toward TNP over other nitroaromatic explosives. The decreased fluorescence of GMP/Tb shows a good linear relationship to the concentrations of TNP ranging from 5.0 to 40.0 µM, and the limit of detection is 26.0 nM (5.96 ppb). The proposed GMP/Tb probe also achieves satisfactory results in real samples. The obtained recoveries of this method in river water samples are in the range 93.15-106.10%. The relative standard deviation (RSD) are 0.57 to 1.01% based on three repeated determinations. This fabricated detector provides a feasible path for determination of ppb-level TNP in natural water samples, which can help humans to avoid TNP-contaminated drinking water. Graphical abstract.

Selective determination of 2,4,6-trinitrophenol by using a novel carbon nanoparticles as a fluorescent probe in real sample.

2,4,6-Trinitrophenol (TNP) is widely used in our daily life; however, excessive use of TNP can lead to a large number of diseases. Therefore, it is necessary to find an effective method to detect TNP. Herein, the rapid fluorescence quenching by TNP was developed for the fluorometric determination of TNP in aqueous medium based on the internal filter effect. Nitrogen-sulfur-codoped carbon nanoparticles (N,S-CNPs), synthesized by a one-pot solvothermal method with the precursors of L-cysteine and citric acid, were applied for the determination of TNP as a fluorescent probe. The excitation peak center of N,S-CNPs and the emission peak center are 340 nm and 423 nm, respectively. The probe can be used in a variety of conditions to detect TNP due to its relatively stable properties. Meanwhile, it has a fast response time (< 1 min), wide linear response range (0.1-40 µM), and low detection limit (43.0 nM). This probe still has excellent selectivity and high sensitivity. The method was also used to detect standard water samples with a satisfactory recovery rate, and it will be used in the application of pollutants and clinical diseases. Graphical abstract.

Preparation of nonconjugated fluorescent polymer nanoparticles for use as a fluorescent probe for detection of 2,4,6-trinitrophenol.

Water-soluble nonconjugated fluorescent polymer nanoparticles (NFPNs) were prepared from branched polyethylenimine (PEI) and citric acid through an amide condensation reaction in the aqueous phase. The NFPNs were characterized using a transmission electron microscope, Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectra (XPS). The NFPN fluorescence (with excitation/emission peaks at 360/450 nm) was quenched by 2,4,6-trinitrophenol (TNP) at trace concentrations through the inner filter effect and the formation of self-assembled non-fluorescent Meisenheimer complexes of TNP on the NFPN surfaces through acid-base interactions. The complexes effectively enriched TNP from the bulk solution on the NFPN surfaces through acid-base interactions, and the strong overlap between NFPN excitation and TNP absorption peaks contributed to NFPNs having good sensitivity and selectivity for TNP. The method was selective for TNP and was not sensitive to other interfering species. The calibration plot of log(F0/F) versus TNP concentration shows a linear relationship (R2 = 0.999) for TNP concentration in the range of 0.5-150 µM. The detection limit for TNP was 0.7 µM. The assay was successfully used to determine TNP in spiked lake water samples, and the recoveries were 96.6-102.7%.

A facile synthesis of multifunctional carbon dots as fluorescence 'turn on' and 'turn off' probes for selective detection of Al3+ and 2,4,6-trinitrophenol.

Carbon dots (CDs) have drawn increasing interests due to their unique optical properties and promising application in various fields. In this study, citric acid (CA) and 5-chloromethyl-8-hydroxyquinoline (LQ) were used to synthesize nitrogen-doped CDs as novel fluorescent probes using a one-step solvothermal route. The as-prepared CDs had strong blue-white fluorescence emission when excited at 405 nm wavelength with a quantum yield (QY) of 25%, behaving with high ion concentration stability. Water-soluble CDs with a 8-hydroxyquinoline structure on their surface could be used to detect Al3+ using a 'turn on' mechanism and trinitrophenol (TNP) using a 'turn off' mechanism with detection limits of 229 nM and 44.4 nM, respectively. Al3+ enhances the fluorescence of CDs by forming a coordination complex to generate a fluorescence synergistic role and limit CD nonradiative transition. TNP quenched the fluorescence with high selectivity and sensitivity, which was attributed to the inner filter effect and static quenching. These results indicated that these CDs with their unique 'turn on' and 'turn off' nature have potential application in the environmental protection field and in prevention of terrorist threats.

2,4,6-Trinitrophenol detection by a new portable sensing gadget using carbon dots as a fluorescent probe.

An optical sensing gadget using fluorescence of carbon dots (CDs) was developed to realize the in-field detection of 2,4,6-trinitrophenol (TNP) in tap water and lake water samples. Fluorescent CDs were prepared through a one-step hydrothermal synthetic route. The fluorescence spectra demonstrated that the CDs could specifically discriminate TNP from other nitroaromatic explosives in an aqueous medium. The fluorescence of the CDs was quenched linearly with the concentration of TNP in the range from 1 to 100 µM, with a detection limit of 0.48 µM (3σ/k). The detection mechanism was ascribed to the synergistic effect of the inner filter effect and electron transfer. In addition, a portable sensing gadget based on a high-precision RGB color sensor and a micro control unit was developed. With use of the sensing gadget and the CDs, TNP detection in tap water and lake water samples was realized. Importantly, the portable sensing gadget combined with highly stable, low-toxicity, and sensitive CDs might have great potential for application in extensive in-field sensing situations. Graphical abstract Carbon dots synthesized with 4-(diethylamino)salicylaldehyde as the initial material were used for 2,4,6-trinitrophenol (TNP) detection. TNP quenches the fluorescence of carbon dots, and the mechanism is ascribed to the synergistic effect of the inner filter effect and electron transfer. A portable sensing gadget based on a 32-bit micro control unit was successfully applied for in-field TNP detection.

A convenient and universal platform for sensing environmental nitro-aromatic explosives based on amphiphilic carbon dots.

2,4,6-trinitrophenol (TNP) is environmentally deleterious substance that has been of pressing societal concern. Therefore, developing a convenient and reliable platforms for its fast and efficient detection is of paramount importance from security point of view. Herein, amphiphilic fluorescent carbon dots (CDs) were prepared by a simple solvothermal method. CDs exhibit high selectivity and sensitivity on TNP in the polar and apolar solvent and even natural water samples. Moreover, the simple and portable indicator paper can be prepared conveniently and used for sensing TNP visually with high sensitivity and fast response. Research findings obtained from this study would assist in the development of portable devices for the on-site and real-time detection of environmental hazards.

Electrochemical determination of 2,4,6-trinitrophenol using a hybrid film composed of a copper-based metal organic framework and electroreduced graphene oxide.

A metal organic framework (MOF) of the type copper(II)-1,3,5-benzenetricarboxylic acid (Cu-BTC) was electrodeposited on electroreduced graphene oxide (ERGO) placed on a glassy carbon electrode (GCE). The modified GCE was used for highly sensitive electrochemical determination of 2,4,6-trinitrophenol (TNP). The fabrication process of the modified electrode was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. Differential pulse voltammetry (DPV) demonstrates that the Cu-BTC/ERGO/GCE gives stronger signals for TNP reduction than Cu-BTC/GCE or ERGO/GCE alone. DPV also shows TNP to exhibit three reduction peaks, the first at a potential of -0.42 V (vs. SCE). This potential was selected because the other three similarly-structured compounds (2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol) do not give a signal at this potential. Response is linear in the 0.2 to 10 µM TNP concentration range, with a 0.1 µM detection limit (at S/N = 3) and a 15.98 µA∙µM-1∙cm-2 sensitivity under optimal conditions. The applicability of the sensor was evaluated by detecting TNP in spiked tap water and lake water samples. Recoveries ranged between 95 and 101%. Graphical abstract Schematic presentation of an electrochemical sensor that was fabricated by electrodeposition of the metal-organic framework (MOF) of copper(II)-1,3,5-benzenetricarboxylic acid (Cu-BTC) onto the surface of electroreduced graphene oxide (ERGO) modified glassy carbon electrode (GCE). It was applied to sensitive and selective detection of 2,4,6-trinitrophenol (TNP).

Transient targeting of phosphoinositide 3-kinase acts as a roadblock in mast cells' route to allergy.

BACKGROUND: Tissue mast cell numbers are dynamically regulated by recruitment of progenitors from the vasculature. It is unclear whether progenitors are recruited during allergic sensitization and whether recruitment promotes allergic responses. OBJECTIVE: We sought to (1) determine the effect of mast cell recruitment on acute allergic responses and (2) to define the role of phosphoinositide 3-kinase (PI3K) isoforms in sequential steps to allergic responses. METHODS: Gene-targeted mice for PI3Kγ or PI3Kδ or mice treated with isoform-specific PI3K inhibitors (a novel PI3Kγ-specific inhibitor [NVS-PI3-4] and the PI3Kδ inhibitor IC87114) were used to monitor IgE-mediated mast cell recruitment, migration, adhesion by means of intravital microscopy, degranulation, TNF-α release, and subsequent endothelial cell activation in vivo or in bone marrow-derived mast cells. RESULTS: Functional PI3Kγ, but not PI3Kδ, was crucial for mast cell accumulation in IgE-challenged skin, TNF-α release from IgE/antigen-stimulated mast cells, and mast cell/endothelial interactions and chemotaxis. PI3Kγ-deficient bone marrow-derived mast cells did not adhere to the endothelium in TNF-α-treated cremaster muscle, whereas PI3Kδ was not required. Depletion of TNF-α blocked IgE-induced mast cell recruitment, which links tissue mast cell-derived cytokine release to endothelial activation and mast cell recruitment. Interference with mast cell recruitment protected against anaphylaxis and was superior to blockage of tissue mast cell degranulation. CONCLUSIONS: Interference with mast cell recruitment to exacerbated tissues provides a novel strategy to alleviate allergic reactions and surpassed attenuation of tissue mast cell degranulation. This results in prolonged drug action and allows for reduction of drug doses required to block anaphylaxis, an important feature for drugs targeting inflammatory disease in general.

Multiple Stimulus Response Material Based on Sr-tcbpe MOF for Mechanochromism, Visualization Labeling, and Etching Toward TNP.

The abuse and excessive discharge of organic pollutants such as nitroaromatic compounds (NACs) have become a hot topic of concern for all humanity and society, and the development of fast, effective, and targeted technical means for detecting NACs also faces many challenges. Here, we reported a strontium-based metal-organic framework (MOF) {[Sr2(tcbpe)(H2O)4]}n (Sr-tcbpe), in which tcbpe represents deprotonated 4',4‴,4″‴,4‴‴-(ethene-1,1,2,2-tetrayl)tetrakis(([1,1'biphenyl]-4-carboxylic acid)). In Sr-tcbpe, Sr-O polyhedron and deprotonated tcbpe4- ligand have a staggered connection to form a self-assembled three-dimensional network structure. In addition, it is found that Sr-tcbpe undergoes no luminescent color change when grinding under solvent protection, while mechanochromic fluorescence behavior is observed when grinding directly, leading to luminescent color changes from cyan to green (Sr-tcbpe-G). Additionally, Sr-tcbpe and Sr-tcbpe-G could selectively detect PNP, DNP, and TNP, and Sr-tcbpe achieves visual fluorescence sensing detection toward TNP at a limit of detection as low as 2.25 µM. Moreover, during the detection process, unexpectedly, TNP exhibits a selective etching effect on Sr-tcbpe, which could drill nano holes with different sizes on the surface area of MOF materials to a certain extent, achieving the conversion of chemical energy to mechanical energy. In addition, the successful preparation of a portable sensor Sr-tcbpe@gypsum block provides a platform for the perfect combination of mechanochromic fluorescence behavior and visualization detection toward TNP. It lays the foundation for the practical application of MOF materials in daily life.

Highly sensitive fluorescent triarylimidazole derivatives for sensing of 2,4,6-trinitrophenol in aqueous solution and its application for actual environment detection.

Two highly sensitive fluorescent triarylimidazole derivatives were synthesized by modifying imidazole with coumarin and large conjugate rigid plane structure. XM-F and XM-L emitted bright yellow-green fluorescent light. Their intense conjugation system generated strong π-π electrostatic interactions with TNP, accompanied by the formation of hydrogen bonds to achieve rapid detection of TNP within 25 s. The detection limits were as low as 0.049 µM and 0.071 µM, respectively. Probes had been successfully applied to rapid detection of TNP in real water samples and manufactured into portable fluorescent test strips. In view of excellent performance of XM-F, it was used to achieve real-time, portable, on-site quantitative detection of TNP by a colorimeter and a smartphone platform. In addition, XM-F also successfully processed into probe-coated TLC plates for efficient detection of fingerprints contaminated with TNP.