Interfacial Dehydration Strategy for Chitosan Film Shape Morphing and Its Application.

Shape morphing of biopolymer materials, such as chitosan (CS) films, has great potential for applications in many fields. Traditionally, their responsive behavior has been induced by the differential water swelling through the preparation of multicomponent composites or cross-linking as deformation is not controllable in the absence of these processes. Here, we report an interfacial dehydration strategy to trigger the shape morphing of the monocomponent CS film without cross-linking. The release of water molecules is achieved by spraying the surface with a NaOH solution or organic solvents, which results in the interfacial shrinkage and deformation of the entire film. On the basis of this strategy, a range of CS actuators were developed, such as soft grippers, joint actuators, and a light switch. Combined with the geometry effect, edited deformation was also achieved from the planar CS film. This shape-morphing strategy is expected to enable the application of more biopolymers in a wide range of fields.

Cell-Specific Targeting of Genetically Encoded Tools for Neuroscience.

Genetically encoded tools for visualizing and manipulating neurons in vivo have led to significant advances in neuroscience, in large part because of the ability to target expression to specific cell populations of interest. Current methods enable targeting based on marker gene expression, development, anatomical projection pattern, synaptic connectivity, and recent activity as well as combinations of these factors. Here, we review these methods, focusing on issues of practical implementation as well as areas for future improvement.

Electricity-Driven Strategies for Bioinspired Multifunctional Swimming Marangoni Robots Based on Super-Aligned Carbon Nanotube Composites.

Marangoni actuators that are propelled by surface tension gradients hold significant potential in small-scale swimming robots. Nevertheless, the release of "fuel" for conventional chemical Marangoni actuators is not easily controllable, and the single swimming function also limits application areas. Constructing controllable Marangoni robots with multifunctions is still a huge challenge. Herein, inspired by water striders, electricity-driven strategies are proposed for a multifunctional swimming Marangoni robot (MSMR), which is fabricated by super-aligned carbon nanotube (SACNT) and polyimide (PI) composite. The MSMR consists of a Marangoni actuator and air-ambient actuators. Owing to the temperature gradient generated by the electrical stimulation on the water surface, the Marangoni actuators can swim controllably with linear, turning, and rotary motions, mimicking the walking motion of water striders. In addition, the Marangoni actuators can also be driven by light. Importantly, the air-ambient actuators fabricated by SACNT/PI bilayer structures demonstrate the function of grasping objects on the water surface when electrically Joule-heated, mimicking the predation behavior of water striders. With the synergistic effect of the Marangoni actuator and air-ambient actuators, the MSMR can navigate mazes with tunnels and grasp objects. This research will provide a new inspiration for smart actuators and swimming robots.

Fiber Actuators Based on Reversible Thermal Responsive Liquid Crystal Elastomer.

Soft actuators inspired by the movement of organisms have attracted extensive attention in the fields of soft robotics, electronic skin, artificial intelligence, and healthcare due to their excellent adaptability and operational safety. Liquid crystal elastomer fiber actuators (LCEFAs) are considered as one of the most promising soft actuators since they can provide reversible linear motion and are easily integrated or woven into complex structures to perform pre-programmed movements such as stretching, rotating, bending, and expanding. The research on LCEFAs mainly focuses on controllable preparation, structural design, and functional applications. This review, for the first time, provides a comprehensive and systematic review of recent advances in this important field by focusing on reversible thermal response LCEFAs. First, the thermal driving mechanism, and direct and indirect heating strategies of LCEFAs are systematically summarized and analyzed. Then, the fabrication methods and functional applications of LCEFAs are summarized and discussed. Finally, the challenges and technical difficulties that may hinder the performance improvement and large-scale production of LCEFAs are proposed, and the development opportunities of LCEFAs are prospected.

A Graphene-Mica-Based Photo-Thermal Actuator for Small-Scale Soft Robots.

Small-scale soft robots demonstrate intricate life-like behavior and allow navigation through arduous terrains and confined spaces. However, the primary challenges in soft robotics are 1) creating actuators capable of quick, reversible 22D-to-3D shape morphing with adjustable stiffness, 2) improving actuation force and robustness for wider applications, and 3) designing holistic systems for untethered manipulation and flexible multimodality in practical scenarios. Here, mechanically compliant paper-like robots are presented with multiple functionalities. The robots are based on photothermally activated polymer bimorph actuators that incorporate graphene for the photo-thermal conversion of energy and muscovite mica, with its high Young's modulus, providing the required stiffness. Conversion of light into heat leads to thermal expansion and bending of the stress-mismatched structures. The actuators are designed on the basis of a modified Timoshenko model, and numerical simulations are employed to evaluate their actuation performance. The membranes can be utilized for light-driven programmable shape-morphing. Localized control allows the implementation of active hinges at arbitrary positions within the membrane. Integrated into small-scale soft robots in mass production, the membrane facilitates locomotion, rolling, and flipping of the robots. Further, grasping and kicking mechanisms are demonstrated, highlighting the potential of such actuators for future applications.

Mixed-Transducer Micro-Origami for Efficient Motion and Decoupled Sensing.

This work introduces a mixed-transducer micro-origami to achieve efficient vibration, controllable motion, and decoupled sensing. Existing micro-origami systems tend to have only one type of transducer (actuator/sensor), which limits their versatility and functionality because any given transducer system has a narrow range of advantageous working conditions. However, it is possible to harness the benefit of different micro-transducer systems to enhance the performance of functional micro-origami. More specifically, this work introduces a micro-origami system that can integrate the advantages of three transducer systems: strained morph (SM) systems, polymer based electro-thermal (ET) systems, and thin-film lead zirconate titanate (PZT) systems. A versatile photolithography fabrication process is introduced to build this mixed-transducer micro-origami system, and their performance is investigated through experiments and simulation models. This work shows that mixed-transducer micro-origami can achieve power efficient vibration with high frequency, large vibration ranges, and little degradation; can produce decoupled folding motion with good controllability; and can accomplish simultaneous sensing and actuation to detect and interact with external environments and small-scale samples. The superior performance of mixed-transducer micro-origami systems makes them promising tools for micro-manipulation, micro-assembly, biomedical probes, self-sensing metamaterials, and more.

Robust Hydrogel Actuators Functioning in Multi-Environments Enabled by Thermo-Responsive Polymer Nanoparticle Coatings on Hydrogel Surfaces.

Hydrogel actuators with anisotropic structures exhibit reversible responsiveness upon the trigger of various external stimuli, rendering them promising for applications in many fields including artificial muscles and soft robotics. However, their effective operation across multiple environments remains a persistent challenge, even for widely studied thermo-responsive polymers like poly(N-isopropyl acrylamide) (PNIPAm). Current attempts to address this issue are hindered by complex synthetic procedures or specific substrates. This study introduces a straightforward methodology to grow a thin, dense PNIPAm nanoparticle layer on diverse hydrogel surfaces, creating a highly temperature-sensitive hydrogel actuator. This actuator demonstrates adaptability across various environments, including water, oil, and open air, owing to its distinct structure facilitating self-water circulation during actuation. The thin PNIPAm layer consists of interconnected PNIPAm nanoparticles synthesized via in situ interfacial precipitation polymerization, seamlessly bonded to the hydrogel substrate through an interfacial layer containing hybrid hydrogel/PNIPAm nanoparticles. This unique anisotropic structure ensures exceptional structural stability without interfacial delamination, even enduring harsh treatments such as freezing, ultrasonic irradiation, and prolonged water immersion. Remarkably, PNIPAm films on hydrogel surfaces which enable programmable 3D actuation can also be precisely patterned. This synthetic approach opens a novel pathway for fabricating advanced hydrogel actuators with broad-ranging applications.

Battery-Free, Wireless Multi-Modal Sensor, and Actuator Array System for Pressure Injury Prevention.

Simultaneous monitoring of critical parameters (e.g., pressure, shear, and temperature) at bony prominences is essential for the prevention of pressure injuries in a systematic manner. However, the development of wireless sensor array for accurate mapping of risk factors has been limited due to the challenges in the convergence of wireless technologies and wearable sensor arrays with a thin and small form factor. Herein, a battery-free, wireless, miniaturized multi-modal sensor array is introduced for continuous mapping of pressure, shear, and temperature at skin interfaces. The sensor array includes an integrated pressure and shear sensor consisting of 3D strain gauges and micromachined components. The mechanically decoupled design of the integrated sensor enables reliable data acquisition of pressure and shear at skin interfaces without the need for additional data processing. The sensor platform enables the analysis of interplay among localized pressure, shear, and temperature in response to changes in the patient's movement, posture, and bed inclination. The validation trials using a novel combination of wireless sensor arrays and customized pneumatic actuator demonstrate the efficacy of the platform in continuous monitoring and efficient redistribution of pressure and shear without repositioning, thereby improving the patient's quality of life.

Soft multi-layer actuators integrated with the functions of electrical energy harvest and storage.

Soft multi-layer actuators are smart, lightweight, and flexible, which can be used in a wide range of fields such as artificial muscles, advanced medical devices, and wearable devices. The research on the actuation property of the soft actuators has made significant progress, paving the way for the controllable motions of the actuators. However, compared with the intelligence and adaptability of life in nature, these actuators still have the problem of insufficient intelligence. The phenomenon is reflected in a lack of continuous supply of energy. Therefore, it has become a development trend to combine functions such as energy harvesting, storage, and conversion with actuators to build intelligent actuators. This concept presents a synopsis of the advancements made in soft actuators that have been coupled with the capabilities of electrical energy harvesting and storage. The design concepts and typical applications of this soft smart actuators are introduced in detail. Finally, the future research directions and applications of smart actuators are prospected from our perspective.

Porous Poly(ionic Liquid) Membrane with Metal Nanoparticle Gradient: A Smart Actuator for Visualizing Chemical Reactions.

Poly(ionic liquid) (PIL)-based porous membranes are extensively investigated as soft polymer actuators. While PILs have shown significant advancements in membrane fabrication and stabilization of metal nanoparticles (MNPs), research on integrating MNPs into porous membranes to achieve actuation behavior under multiple stimuli is limited. Herein, this work presents a new paradigm for designing a porous PIL-polyacrylic acid (PAA) membrane with a distinct MNP gradient via a top-bottom diffusion approach involving a metal salt precursor solution and NaBH4 as a reducing agent. The strong binding sites provided by PILs, combined with the gradient distribution of -COO- groups across the membrane cross-section, play a significant role in controlling the MNPs' gradient distribution. Interestingly, the MNPs within the membrane display excellent catalytic activity in exothermic reactions such as H2O2 decomposition, dissipating uneven heat that quickly permeates the membrane network. This induces asymmetrical swelling of polymer chains, resulting in rapid membrane bending. Furthermore, such MNP-loaded membrane could serve as a portable test paper for visually monitoring H2O2. This advancement paves the way for the development of intricate smart actuation materials and expands their practical applications in various real-life scenarios.

Effects of Operating Mechanical Conditions and Polymer Networks of Nematic Elastomers on Photo-Induced Mechanical Performances.

Photoresponsive liquid-crystalline elastomers (LCEs) are promising candidates for light-controlled soft actuators. Photoinduced stress/strain originates from the changes in mechanical properties after light irradiation. However, the correlation between the photoinduced mechanical performance and in-use conditions such as stress/strain states and polymer network properties (such as effective crosslink density and dangling chain density) remains unexplored for practical applications. Here, isometric photo-induced stress or isotonic strain is investigated at different operating strains or stresses, respectively, on LCEs with polymer network variations, produced by different amounts of solvent during polymerization. As the solvent volume increases, the moduli and photoinduced stresses decrease. However, the photo-induced strain, fracture strain, fracture stress, and viscosity increase. The optical response performance initially increases with the operating strain/stress, peaks at a higher actuation strain/stress, and then, decreases depending on the polymer network. The maximum work densities, which also depend on the operating stress, are in the range of ≈200-300 kJm-3. These findings, highlighting the significant variations in the mechanical performance with the operating stress/strain ranges and amount of solvent used in the synthesis, are critical for designing LCE-based mechanical devices.

Experimental Validation of Two Types of Force Actuators: A Performance Comparison.

This paper experimentally investigates the performance of piezoelectric force actuators. Using the same encapsulated piezoelectric stack, an inertial-type actuator and a frame-type actuator are constructed for performance comparison. The experimental results are also used to validate the recently established actuator models, whilst the mechanical and piezoelectrical parameters of the models are experimentally identified. The performance of the actuators is described by the transmitted force(s) and input power flow from the actuators to the base structure with reference to the same electrical input voltage to the stack. The validation is deemed successful due to the strong agreement observed between the measured and predicted actuator performances. Additionally, it is discovered that the frame-type actuator has the capacity to produce significantly higher transmitted forces and input power flow to the base structure compared to the inertial-type actuator. The mechanism underlying the performance disparity between these two types of actuators is also examined. This paper clarifies the mechanism, shedding light on the design and optimization of piezoelectric actuators.

Highly Selective Tilted Triangular Springs with Constant Force Reaction.

Guiding mechanisms are among the most elementary components of MEMS. Usually, a spring is required to be compliant in only one direction and stiff in all other directions. We introduce triangular springs with a preset tilting angle. The tilting angle lowers the reaction force and implements a constant reaction force. We show the influence of the tilting angle on the reaction force, on the spring stiffness and spring selectivity. Furthermore, we investigate the influence of the different spring geometry parameters on the spring reaction force. We experimentally show tilted triangular springs exhibiting constant force reactions in a large deflection range and a comb-drive actuator guided by tilted triangular springs.

Fault Diagnostics Based on the Analysis of Probability Distributions Estimated Using a Particle Filter.

This paper proposes a monitoring procedure based on characterizing state probability distributions estimated using particle filters. The work highlights what types of information can be obtained during state estimation and how the revealed information helps to solve fault diagnosis tasks. If a failure is present in the system, the output predicted by the model is inconsistent with the actual output, which affects the operation of the estimator. The heterogeneity of the probability distribution of states increases, and a large proportion of the particles lose their information content. The correlation structure of the posterior probability density can also be altered by failures. The proposed method uses various indicators that characterize the heterogeneity and correlation structure of the state distribution, as well as the consistency between model predictions and observed behavior, to identify the effects of failures.The applicability of the utilized measures is demonstrated through a dynamic vehicle model, where actuator and sensor failure scenarios are investigated.

Impact of Solid Materials in the Gap Space between Driving Electrodes in a MEMS Tri-Electrode Electrostatic Actuator.

MEMS electrostatic actuators can suffer from a high control voltage and a limited displacement range, which are made more prevalent by the pull-in effect. This study explores a tri-electrode topology to enable a reduction in the control voltage and explores the effect of various solid materials forming the space between the two underlying stationary electrodes. Employing solid dielectric material simplifies fabrication and can reduce the bottom primary electrode's fixed voltage. Through numerical analysis, different materials were examined to assess their impact. The results indicate that the primary electrode's fixed voltage can be reduced with an increase in the dielectric constant, however, with the consequence of reduced benefit to control voltage reduction. Additionally, charge analysis was conducted to compare the actuator's performance using air as the gap-spacing material versus solid materials, from the perspective of energy conservation. It was found that solid materials result in a higher accumulated charge, reducing the need for a high fixed voltage.

Piezoceramics Actuator with Attached Mass for Active Vibration Diagnostics of Reinforced Concrete Structures.

One of the effective methods of non-destructive testing of structures is active vibration diagnostics. This approach consists of the local dynamic impact of the actuator on the structure and the registration of the vibration response. Testing of massive reinforced concrete structures is carried out with the use of actuators, which are able to create sufficiently high-impact loads. The actuators, which are based on piezoelectric elements, cannot provide a sufficient level of force and the areas where it is possible to register the vibrations excited by such actuators are quite small. In this paper, we propose a variant of a piezoactuator with attached mass, which ensures an increase in the level of dynamic impact on the structure. The effectiveness of this version is verified by numerical modeling of the dynamic interaction of the actuator with a concrete slab. The simulation was carried out within the framework of the theory of elasticity and coupled electroelasticity. An algorithm for selecting the value of the attached mass is described. It is shown that when vibrations are excited in a massive concrete slab, an actuator with an attached mass of 1.3 kg provides a 10,000-fold increase in the force compared to an actuator without attached mass. In the pulse mode, a 100-fold increase in force is achieved.

Research on Electric Oil-Pneumatic Active Suspension Based on Fractional-Order PID Position Control.

In this study, an electric oil and gas actuator based on fractional-order PID position feedback control is proposed, through which the damping coefficient of the suspension system is adjusted to realize the active control of the suspension. An FOPID algorithm is used to control the motor's rotational angle to realize the damping adjustment of the suspension system. In this process, the road roughness is collected by the sensors as the criterion of damping adjustment, and the particle swarm algorithm is utilized to find the optimal objective function under different road surface slopes, to obtain the optimal cornering value. According to the mathematical and physical model of the suspension system, the simulation model and the corresponding test platform of this type of suspension system are built. The simulation and experimental results show that the simulation results of the fractional-order nonlinear suspension model are closer to the actual experimental values than those of the traditional linear suspension model, and the accuracy of each performance index is improved by more than 18.5%. The designed active suspension system optimizes the body acceleration, suspension dynamic deflection, and tire dynamic load to 89.8%, 56.7%, and 73.4% of the passive suspension, respectively. It is worth noting that, compared to traditional PID control circuits, the FOPID control circuit designed for motors has an improved control performance. This study provides an effective theoretical and empirical basis for the control and optimization of fractional-order nonlinear suspension systems.

A Flexible Printed Circuit Board Based Microelectromechanical Field Mill with a Vertical Movement Shutter Driven by an Electrostatic Actuator.

Micromachined electric field mills have received much interest for the measurement of DC fields; however, conventional designs with lateral moving shutters could have shutter lifting in the presence of strong fields, which affects their performance. This paper presents a MEMS electric field mill utilizing a vertical movement shutter to address this issue. The sensor is designed and fabricated based on a flexible PCB substrate and is released using a laser-cutting process. The movement of the shutter is driven by an electrostatic actuator. When the driving signal is a sine wave, the shutter moves in the same direction during both the positive and negative half-periods. This facilitates the application of a lock-in amplifier to synchronize with the signal at twice the frequency of the driving signal. In experimental testing, when the vertical shutter is driven at a resonance of 840 Hz, the highest sensitivity of the sensor is achieved and is measured to be 5.1 V/kVm-1. The sensor also demonstrates a good linearity of 1.1% for measuring DC electric fields in the range of 1.25 kV/m to 25 kV/m.

Sensor-Less Control of Mirror Manipulator Using Shape Memory Polyimide Composite Actuator: Experimental Work.

Integrated thin film-based shape memory polyimide composites (SMPICs) are potentially attractive for efficient and compact design, thereby offering cost-effective applications. The objective of this article is to design and evaluate a mirror manipulator using an SMPIC as an actuator and a sensor with control. A sensor-less control strategy using the SMPIC (a self-sensing actuator) with a proportional derivative combined variable structure controller (PD-VSC) is proposed for position control of the mirror in both the vertical and angular directions. The mirror manipulator is able to move the mirror in the vertical and angular directions by 3.39 mm and 10.5 deg, respectively. A desired fast response is obtained as the performance under control. In addition, some benefits from the proposed control realization include good tracking, stable switching, no overshoot, no steady state oscillations, and robust disturbance rejection. These superior properties are experimentally validated to reflect practical feasibility.

Highly Responsive Soft Electrothermal Actuator with High-Output Force Based on Polydimethylsiloxane (PDMS)-Coated Carbon Nanotube (CNT) Sponge.

Recently, soft actuators have been found to have great potential for various applications due to their ability to be mechanically reconfigured in response to external stimuli. However, the balance between output force and considerable strain constrains their potential for further application. In this work, a novel soft electrothermal actuator was fabricated by a polydimethylsiloxane (PDMS)-coated carbon nanotube sponge (CNTS). The results showed that CNTS was heated to 365 °C in ∼1 s when triggered by a voltage of 3.5 V. Consequently, due to the large amount of air inside, the actuator expanded in 2.9 s, lifting up to ∼50 times its weight, indicating an ultrafast response and powerful output force. In addition, even in water, the soft actuator showed quick response at a voltage of 6 V. This air-expand strategy and soft actuator design is believed to open a new horizon in the development of electronic textiles, smart soft robots, and so on.