RESUMO
Microplastics are found in various human tissues and are considered harmful, raising concerns about human exposure to microplastics in the environment. Existing research has analyzed indoor and occupational scenarios, but long-term monitoring of ambient atmospheric microplastics (AMPs), especially in highly polluted urban regions, needs to be further investigated. This study estimated human environmental exposure to AMPs by considering inhalation, dust ingestion, and dermal exposure in three urban functional zones within a megacity. The annual exposure quantity was 7.37 × 104 items for children and 1.06 × 105 items for adults, comparable with the human microplastic consumption from food and water. Significant spatiotemporal differences were observed in the characteristics of AMPs that humans were exposed to, with wind speed and rainfall frequency mainly driving these changes. The annual human AMP exposure quantity in urban green land spaces, which were recognized as relatively low polluted zones, was comparable with that in public service zones and residential zones. Notably, significant positive correlations between the AMP characteristics and the pathogenicity of the airborne bacterial community were discovered. AMP size and immune-mediated disease risks brought by atmospheric microbes showed the most significant relationship, where Sphingomonas might act as the potential key mediator.
Assuntos
Microplásticos , Poluentes Químicos da Água , Criança , Adulto , Humanos , Plásticos , Monitoramento Ambiental , Poeira/análise , Exposição Ambiental , Poluentes Químicos da Água/análiseRESUMO
Plastic pollution is one of the most pressing environmental and social issues of the 21st century. Recent work has highlighted the atmosphere's role in transporting microplastics to remote locations [S. Allen et al., Nat. Geosci. 12, 339 (2019) and J. Brahney, M. Hallerud, E. Heim, M. Hahnenberger, S. Sukumaran, Science 368, 1257-1260 (2020)]. Here, we use in situ observations of microplastic deposition combined with an atmospheric transport model and optimal estimation techniques to test hypotheses of the most likely sources of atmospheric plastic. Results suggest that atmospheric microplastics in the western United States are primarily derived from secondary re-emission sources including roads (84%), the ocean (11%), and agricultural soil dust (5%). Using our best estimate of plastic sources and modeled transport pathways, most continents were net importers of plastics from the marine environment, underscoring the cumulative role of legacy pollution in the atmospheric burden of plastic. This effort uses high-resolution spatial and temporal deposition data along with several hypothesized emission sources to constrain atmospheric plastic. Akin to global biogeochemical cycles, plastics now spiral around the globe with distinct atmospheric, oceanic, cryospheric, and terrestrial residence times. Though advancements have been made in the manufacture of biodegradable polymers, our data suggest that extant nonbiodegradable polymers will continue to cycle through the earth's systems. Due to limited observations and understanding of the source processes, there remain large uncertainties in the transport, deposition, and source attribution of microplastics. Thus, we prioritize future research directions for understanding the plastic cycle.
Assuntos
Atmosfera/química , Monitoramento Ambiental/métodos , Microplásticos/efeitos adversos , Atmosfera/análise , Poeira , Poluição Ambiental/análise , Microplásticos/química , Material Particulado/análise , Plásticos/análise , Plásticos/química , Polímeros , SoloRESUMO
The deposition is an important process of microplastics transporting from atmosphere to water and soil. But the spatial and temporal distribution of microplastics in urban atmospheric deposition and its influencing factors are poorly understood. The current study investigated the possible sources, spatial and temporal distribution, and potential ecological risk of microplastics in deposition from the valley basin of Lanzhou city during the COVID-19 pandemic (from February to August, 2020). The deposition flux of microplastics was 353.83 n m-2 d-1. Most plastic samples were small sized (50ï½500 µm) and transparent. The dominant chemical composition and shapes were PET, fragments and fibers, respectively. A modified method was conducted to identify the sources of microplastics, and the local sources were suggested as the main possible sources. The distribution of microplastics investigated through the inverse distance weight interpolation showed spatial variation and temporal differentiation which was dominated by the human activity. The rainfall also affected the temporal distribution. The preliminary assessment indicated higher potential ecological risk of microplastics in deposition. This study suggested the dominant effect of human activity on the source and distribution of atmospheric microplastic deposition in city.
Assuntos
COVID-19 , Poluentes Químicos da Água , China , Monitoramento Ambiental , Humanos , Microplásticos , Pandemias , Plásticos , SARS-CoV-2 , Poluentes Químicos da Água/análiseRESUMO
Microplastics (MPs) refer to plastic particles with a size less than 5 mm, which attracted widespread attention as an emerging pollutant. The monitoring of atmospheric microplastics (AMPs) in a megacity was carried out to study the characteristics and spatiotemporal distribution of AMPs, explore the sources and estimate the deposition flux. The results showed that the annual average abundance of AMPs in Wuhan was 82.85 ± 57.66 n·m-2·day-1. The spatiotemporal distribution characteristics of AMPs show that spring was the highest season, followed by autumn, winter, and summer; the city center was higher than the suburbs. Fiber was the main type of AMPs in Wuhan, followed by fragment, film and pellet. The proportion of AMPs were mainly small (<0.5 mm) and medium (0.5-1.0 mm). Transparent and white were the main colors of AMPs, followed by red, brown. A total of 10 types polymers were detected, polyethylene terephthalate (PET) was dominant. There are positive correlations between AMPs and SO2, NO2 in the atmosphere, indicating that they might be influenced by intense human activity. The polycyclic aromatic hydrocarbons (PAHs) and AMPs in spring showed an extremely significant positive correlation (p < 0.05). AMPs might mainly originate from the wear and tear shedding of textiles, the aging of agricultural films and plastic waste based on their polymer types and main uses. The potential geographical sources of AMPs were mainly the surrounding cities. The annual deposition flux of AMPs was about 308 tons if there were no remove processes, which highlighted the importance of atmospheric transport and deposition of MPs. The analysis of the abundance, morphological characteristics and sources of AMPs can provide data support and reference for mega-cities with high global population activities, or cities in global mid-latitude regions.
Assuntos
Poluentes Atmosféricos , Poluentes Químicos da Água , Humanos , Microplásticos/análise , Plásticos , Cidades , Monitoramento Ambiental/métodos , Poluentes Atmosféricos/análise , Poluentes Químicos da Água/análiseRESUMO
Microplastic (MP) pollution is evolving into one of the most pressing environmental concerns worldwide. This study assessed the impact of economic activities on atmospheric MP pollution across 17 megacities in northern China, analyzing the correlation between the deposition flux of atmospheric MPs and variables such as city population, gross domestic product (GDP), and industrial structure. The results have shown that the MP pollution is obviously impacted by human activities related to increased GDP, population, as well as tertiary service sector, in which the MP pollution shows most close relationship with the GDP growth. Polypropylene, polyamide, polyurethane, and polyethylene were identified as the primary components of atmospheric MPs. The average particle size of MPs in atmospheric dustfall is 78.3 µm, and the frequency of MP particles increases as the particle size decreases. The findings highlight the complex relationship between socio-economic development and atmospheric MP accumulation, providing essential insights for the formulation of targeted emission reduction strategies.
RESUMO
Although the prevalence of microplastics in the atmosphere has recently received considerable attention, there is little information available regarding the distribution of atmospheric microplastics over oceanic regions. In this study, during the summer and autumn months of 2022, we investigated atmospheric microplastics in four marine regions off the eastern coast of mainland China, namely, the southern, middle, and northern regions of the Yellow Sea, and the Bohai Sea. The abundance of atmospheric microplastics in these regions ranged from 1.65 to 16.80 items/100 m3 during summer and from 0.38 to 14.58 items/100 m3 during autumn, although we detected no significant differences in abundance among these regions. Polyamide, chlorinated polyethylene, and polyethylene terephthalate were identified as the main types of plastic polymer. On the basis of meteorological data and backward trajectory model analyses, we established that the atmospheric microplastics detected during summer were mainly derived from the adjacent marine atmosphere and that over the continental landmass in the vicinity of the sampling area, whereas microplastics detected during autumn appear to have originated mainly from the northeast of China. By influencing the settlement and migration of microplastics, meteorological factors, such as relative humidity and wind speed, were identified as potential factors determining the distribution and characteristics of the detected microplastics. Our findings in this study, revealing the origin and fate of marine atmospheric microplastics, make an important contribution to our current understanding of the distribution and transmission of microplastics within the surveyed region and potentially worldwide.
RESUMO
Microplastics (MPs), recognized as emerging pollutants, pose significant potential impacts on the environment and human health. The investigation into atmospheric MPs is nascent due to the absence of effective characterization methods, leaving their concentration, distribution, sources, and impacts on human health largely undefined with evidence still emerging. This review compiles the latest literature on the sources, distribution, environmental behaviors, and toxicological effects of atmospheric MPs. It delves into the methodologies for source identification, distribution patterns, and the contemporary approaches to assess the toxicological effects of atmospheric MPs. Significantly, this review emphasizes the role of Machine Learning (ML) and Artificial Intelligence (AI) technologies as novel and promising tools in enhancing the precision and depth of research into atmospheric MPs, including but not limited to the spatiotemporal dynamics, source apportionment, and potential health impacts of atmospheric MPs. The integration of these advanced technologies facilitates a more nuanced understanding of MPs' behavior and effects, marking a pivotal advancement in the field. This review aims to deliver an in-depth view of atmospheric MPs, enhancing knowledge and awareness of their environmental and human health impacts. It calls upon scholars to focus on the research of atmospheric MPs based on new technologies of ML and AI, improving the database as well as offering fresh perspectives on this critical issue.
RESUMO
The rising trend of plastic production in last years and the inadequate disposal of related waste has raised concerns regarding microplastic-related environmental issues. Microplastic particles disperse by means of transport and deposition processes to different ecosystems and enter food chains. In this paper, atmospheric deposition and foliage samples of two species (i.e., Hedera helix and Photinia glabra) were collected and analysed for the quantity and identity of microplastics (MPs). A preliminary methodology to treat foliage samples and subsequently identify MPs using a quantum cascade laser IR spectrophotometer is presented. The treatment of airborne samples involved filtration, mild digestion, concentration, and transfer onto reflective slides whereas that for foliage involved washing, concentration, and transference of putative MPs onto reflective slides. Fibers and fragments were differentiated according to their physical features (size, width, height, etc.) and calculating derived characteristics (namely, circularity and solidity). The preliminary results obtained suggest a good agreement between atmospheric-deposited and foliage-retained MPs, showing the capability of leaves to act as passive samplers for environmental monitoring.
Assuntos
Poluentes Atmosféricos , Monitoramento Ambiental , Microplásticos , Folhas de Planta , Monitoramento Ambiental/métodos , Microplásticos/análise , Folhas de Planta/química , Poluentes Atmosféricos/análise , Hedera/química , Tamanho da Partícula , Atmosfera/química , Plásticos/análiseRESUMO
The number of studies dealing with airborne microplastics (MPs) is increasing but sampling and sample treatment are not standardized, yet. Here, a fast and reliable method to characterize MPs is presented. It involves the study of two passive sampling devices to collect atmospheric bulk deposition (wet and dry deposition) and three digestion methods (two alkaline-oxidative and an oxidative) to treat the samples. The alkaline-oxidative method based on KOH and NaClO was selected for a mild organic matrix digestion. In addition, some operational parameters of a high-throughput quantum cascade laser-based infrared device (LDIR) were optimized: an effective automatic tiered approach to differentiate fibres from particles (>90 % success in validation) and a criterion to establish positive matches when comparing an unknown spectrum against the spectral database (proposed match index > 0.85). The procedural analytical recoveries were very good for particles (82-90 %) and slightly lower for fibres (62-73 %). Finally, the amount and type of MPs deposited at a sub-urban area NW Spain were evaluated. Most common polymers were Polyethylene (PE), Polypropylene (PP) and Polyethylene terephthalate (PET). The deposition rates ranged 98-1220 MP/m2/day, ca. 1.7 % of the total collected particles. More than 50 % of the total MPs deposited were in the 20-50 µm size range, whereas fibres were mostly in the 50-500 µm size range.
RESUMO
After over 20 years of research on microplastic (MP) pollution, there are important areas of study which are still at the inception. In particular, between 2020 and 2023 new findings on MP have emerged, which open new sub-categories of MP research. These research areas include sea surface MP ejection, direct and indirect MP influence on climate and hydrological cycle, small and nano-sized MP analysis and the relationship between MP size and abundance. Not reported or barely mentioned in previous reviews, these globally-relevant findings are here highlighted and discussed with aim to promote their further research that will potentially result in new evidence of detrimental effects of MP pollution on the biosphere.
RESUMO
Atmospheric microplastics (AMPs) have raised much concern for public health due to their potential for exposure. In this study, temporal distribution, characteristics and exposure risk of AMPs were studied in the urban area of Guangzhou, a metropolis in Southern China, and the washout effect of rainfall on AMPs was investigated. It was found that AMP abundances in Guangzhou were in a range of 0.01-0.44 items/m3, with higher abundance in the wet season (0.19 ± 0.01 items/m3) than in the dry season (0.15 ± 0.02 items/m3). The distribution of AMPs did not correspond to that of common air pollutants (e.g., PM2.5 and PM10), implying that their pollution sources might be distinct. In Guangzhou, a total of 1.26 × 1011 items AMPs are in the air every year, and annual inhalation exposure of adults was estimated to be in the range of 79.65-3.50 × 103 items. The annual deposition flux of AMPs is 65.94 ± 7.53 items/m2/d, and the deposition flux in the wet season (84.00 ± 6.95 items/m2/d) was much greater than that in the dry season (47.88 ± 8.35 items/m2/d). Furthermore, rainfall has an effective mechanism for removing AMPs from the atmosphere, with an average washout ratio of (19.39 ± 6.48) × 104 for rainfall washing AMPs out. Compared to moderate rain (2.5-10 mm/h) and heavy rain (10-50 mm/h), light rain (rainfall intensity <2.5 mm/h) had a better washout effect. This study contributes to the evaluation of AMP exposure risk and understanding of AMP environmental behavior and fate by providing long-term monitoring data on AMPs and quantifying the washout effect of rainfall on AMPs for the first time.
Assuntos
Poluentes Atmosféricos , Microplásticos , Plásticos , Poluentes Atmosféricos/análise , Atmosfera , China , Chuva , Monitoramento AmbientalRESUMO
Microplastics (< 5 mm) have lately been identified in the atmosphere of urban, suburban, and even distant places far from plastic particle areas, suggesting the possibility of long-distance atmospheric transport of microplastics. However, the occurrence, fate, transmission, and effects of these suspended atmospheric microplastics (SAMPs) are all currently unknown in the Philippines. This study investigated the presence of suspected microplastic in the atmosphere of sixteen cities and one municipality of Metro Manila, Philippines. Sampling was conducted using a respirable dust sampler mounted with a Whatman GF/C filter paper at an intake flow rate of 1.4 L/min with Whatman GF/C filter paper. Results reveal that all seventeen sampling areas have the presence of SAMPs. A total of 155 SAMPs were found and confirmed in Metro Manila, with the highest concentration in Muntinlupa City and Mandaluyong City (0.023 SAMP/NCM). Fourteen SAMP types were identified across the sampling areas, â 74% with polyester. This study is the first record of the presence of microplastics suspended in the ambient air in the Philippines. It is estimated that an adult person in Metro Manila has the potential to inhale (5-8 per minute, normal minute ventilation) about 1 SAMP if exposed for about 99.0 to 132 h. Further studies should be done to evaluate the fate and health effects of these SAMPs in Metro Manila's setting.
Assuntos
Plásticos , Poluentes Químicos da Água , Adulto , Humanos , Microplásticos , Filipinas/epidemiologia , Compostos de Fenilmercúrio , Monitoramento Ambiental , Poluentes Químicos da Água/análiseRESUMO
The distribution and transport of atmospheric microplastics (AMPs) have raised concerns regarding their potential effects on the environment and human health. Although previous studies have reported the presence of AMPs at ground level, there is a lack of comprehensive understanding of their vertical distribution in urban environments. To gain insight into the vertical profile of AMPs, field observations were conducted at four different heights (ground level, 118 m, 168 m and 488 m) of the Canton Tower in Guangzhou, China. Results showed that the profiles of AMPs and other air pollutants had similar layer distribution patterns, although their concentrations differed. The majority of AMPs were composed of polyethylene terephthalate and rayon fibers ranging from 30 to 50 µm. As a result of atmospheric thermodynamics, AMPs generated at ground level were only partially transported upward, leading to a decrease in their abundance with increasing altitude. The study found that the stable atmospheric stability and lower wind speed between 118 m and 168 m resulted in the formation of a fine layer where AMPs tended to accumulate instead of being transported upward. This study for the first time delineated the vertical profile of AMPs within the atmospheric boundary layer, providing valuable data for understanding the environmental fate of AMPs.
RESUMO
Microplastic (MP) pollution has aroused a tremendous amount of public and scientific interest worldwide. MPs are found widely ranging from terrestrial to aquatic ecosystems primarily due to the over-exploitation of plastic products and unscientific disposal of plastic waste. There is a large availability of scientific literature on MP pollution in the terrestrial and aquatic ecosystems, especially the marine environments; however, only recently has greater scientific attention been focused on the presence of MPs in the air and its retrospective health implications. Besides, atmospheric transport has been reported to be an important pathway of transport of MPs to the pristine regions of the world. From a health perspective, existing studies suggest that airborne MPs are priority pollutant vectors, that may penetrate deep into the body through inhalation leading to adverse health impacts such as neurotoxicity, cancer, respiratory problems, cytotoxicity, and many more. However, their effects on indoor and outdoor air quality, and on human health are not yet clearly understood due to the lack of enough research studies on that and the non-availability of established scientific protocols for their characterization. This scientific review entails important information concerning the abundance of atmospheric MPs worldwide within the existing literature. A thorough comparison of existing sampling and analytical protocols has been presented. Besides, this review has unveiled the areas of scientific concern especially air quality monitoring which requires immediate attention, with the information gaps to be filled have been addressed.
Assuntos
Microplásticos , Poluentes Químicos da Água , Humanos , Plásticos , Ecossistema , Estudos Retrospectivos , Monitoramento Ambiental , Poluentes Químicos da Água/análiseRESUMO
Atmospheric microplastic transport is an important delivery pathway with the deposition of microplastics to ecologically important regions raising environmental concerns. Investigating atmospheric delivery pathways and their deposition rates in different ecosystems is necessary to understanding its global impact. In this study, atmospheric deposition was collected at three sites in Malaysia, two urban and one pristine, covering the Northeast and Southwest monsoons to quantify the role of this pathway in Southeast Asia. Air mass back trajectories showed long-range atmospheric transport of microplastics to all sites with atmospheric deposition varying from 114 to 689 MP/m2/day. For the east coast of Peninsular Malaysia, monsoonal season influenced microplastic transport and deposition rate with peak microplastic deposition during the Northeast monsoon due to higher wind speed. MP morphology combined with size fractionation and plastic type at the coastal sites indicated a role for long-range marine transport of MPs that subsequently provided a local marine source to the atmosphere at the coastal sites.
RESUMO
Microplastics are subject to environmental forces that can change polymer organization on a molecular scale. However, it is not clear to what extent these changes occur in the environment and whether microplastics in the atmospheric and water environment differ. Here we identify structural differences between microplastics in the atmosphere and water environment from Japan and New Zealand, representing two archipelagos differing in their proximity to nearby countries and highly populated areas. We first highlight the propensity for smaller microplastics to arrive via air masses from the Asian continent to the Japan Sea coastal area, while New Zealand received larger, locally derived microplastics. Analyses of polyethylene in the Japanese atmosphere indicate that microplastics transported to the Japanese coastal areas were more crystalline than polyethylene particles in the water, suggesting that the plastics arriving by air were relatively more aged and brittle. By contrast, polypropylene particles in New Zealand waters were more degraded than the microplastic particles in the air. Due to the lack of abundance, both polyethylene and polypropylene could not be analyzed for both countries. Nevertheless, these findings show the structural variation in microplastics between environments in markedly different real-world locations, with implications for the toxic potential of these particles.
Assuntos
Microplásticos , Poluentes Químicos da Água , Plásticos , Água , Japão , Nova Zelândia , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Polipropilenos , Atmosfera , Polietileno/análiseRESUMO
Despite increasing the public awareness of ubiquity of microplastics (MPs) in air, the issue on particular source of tire wear particles (TWPs) emission into atmosphere and their exposure-associated human health has not received the attention it deserves. Here we linked vehicle kilometers traveled (VKT) estimates covering demography, socio-environmental, and transportation features and emission factors to predict regional emission patterns of TWP-derived atmospheric MPs. A data-driven probabilistic approach was developed to consider variability across the datasets and uncertainty of model parameters in terms of country-level and vehicle-type emissions. We showed that country-specific VKT from billion to trillion vehicle-kilometer resulted in 103-105 metric tons of airborne TWP-derived atmospheric MPs annually in the period 2015-2019, with the highest emissions from passenger cars and heavy-duty vehicles. On average, we found that airborne TWP emissions from passenger cars by country had substantial decreased (up to â¼33%) during COVID-19 lockdowns in 2020 and pronounced increased (by a factor â¼1.9) from vehicle electrification by the next three decades. We conclude that the stunning mass of airborne TWP is a predominant source of atmospheric MP. We underscore the necessity of TWP emissions control among the United States, China, and India. Our findings can be of great use to environmental transportation planners for devising vehicle/tire-oriented decision support tools. Our data offer information to enhance TWP-exposure estimates, to examine long-term exposure trends, and subsequently to improve health risk assessment during pandemic outbreak and future electrification.
RESUMO
Microplastics (MPs) pollution is becoming one of the most pressing environmental issues globally. MPs in the marine, freshwater and terrestrial environments have been fairly well investigated. However, knowledge of the atmospheric-mediated deposition of MPs within rural environments is limited. Here, we present the results of bulk (dry and wet) atmospheric MPs deposition in a rural region of Quzhou County in the North China Plain (NCP). Samples of MPs in the atmospheric bulk deposition were collected for individual rainfall events over a 12-month period from August 2020 to August 2021. The number and size of MPs from 35 rainfall samples were measured by fluorescence microscopy, while the chemical composition of MPs was identified using micro-Fourier transform infrared spectroscopy (µ-FTIR). The results showed that the atmospheric MPs deposition rate in summer (892-75,421 particles/m2/day) was highest compared to 735-9428, 280-4244 and 86-1347 particles/m2/day in spring, autumn, and winter, respectively. Furthermore, the MPs deposition rates in our study were 1-2 orders of magnitude higher than those in other regions, indicating a higher rate of MPs deposition in the rural region of the NCP. MPs with a diameter of 3-50 µm accounted for 75.6 %, 78.4 %, 73.4 % and 66.1 % of total MPs deposition in spring, summer, autumn, and winter, respectively, showing that the majority of MPs in the current study were small in size. Rayon fibers accounted for the largest proportion (32 %) of all MPs, followed by polyethylene terephthalate (12 %) and polyethylene (8 %). This study also found that a significant positive correlation between rainfall volume and MPs deposition rate. In addition, HYSPLIT back-trajectory modelling showed that the farthest source of deposition MPs may have come from Russia.
RESUMO
Although suspended atmospheric microplastics (SAMPs) have been found to be ubiquitous and have potential impacts on human health, whereas studies related to source apportionment and potential ecological risk assessment in the atmospheric environment are still limited. This study investigated spatial distribution, source apportionment and potential ecological risk of SAMPs in six underlying surfaces of Harbin, China. The results show that all six underlying surfaces existed SAMPs, including polypropylene (PP), polyethylene terephthalate (PET) polyethylene (PE), polystyrene (PS) and polyvinyl chloride (PVC), with approximate 26.13 %, 24.10 %, 23.87 %, 13.51 %, and 12.39 %, respectively. SAMPs abundances from filtered air were relatively high and averaged 1.76 n/m3. The SAMPs mainly contained fibrous (59.01 %), fragmented (30.18 %), and granular (10.81 %) with transparent (62.39 %), black 13.74 %), red (7.43 %), white (6.53 %), blue, and yellow (3.60 %), and particle size ranged from 1.3 to 518 µm. In addition, source apportionment of SAMPs shows that SAMPs were originated from five emission sources including living source (19.53 %), construction source (12.08 %), transportation source (47.25 %), industrial source (5.11 %), and agricultural source (16.13 %) in Harbin. A significant correction was observed between SAMPs abundances and human activity (R = 0.68, P = 0.66), atmospheric humidity (R = -0.40, P = 0.02), and wind direction (R = 0.22, P = 0.04) in different underlying surface. Furthermore, potential ecological hazardous single index (EI) of PVC and PS were higher than PP, PET, and PS in the construction land, cultivated land, forest land, grassland, water area, and unused land. An estimation of the potential ecological risk index (RI) from SAMPs using Positive Matrix Factorization (PMF) model indicated that Harbin presented a minor ecological risk with average 16.59 of RI index of microplastics in environments. In conclusion, data in this study indicate that SAMPs are existed in atmospheric environments, which have possible risks for human health via inhalation.
RESUMO
As an emerging environmental pollutant, microplastics have attracted much attention, but the sources and health hazards of atmospheric microplastics (AMPs) remain unclear. In order to explore the distribution characteristics, assess the risk of human respiratory exposure, and analyze the sources of AMPs in different functional areas of Yichang City, AMPs samples from 16 observation points were collected and analyzed, and the HYSPLIT model was used. The results showed that the main shapes of AMPs in Yichang City were fiber, fragment, and film, and six colors were observed including transparent, red, black, green, yellow, and purple. The smallest size was 10.42 µm, and the largest was 4761.42 µm. The deposition flux of AMPs was (4400±474) n·(m2·d)-1. The types of APMs were polyester fiber (PET), acrylonitrile-butadiene-styrene copolymer (ABS), polyamide (PA), rubber (Rubber), polyethylene (PE), cellulose acetate (CA), and polyacrylonitrile (PAN). The order of the subsidence flux in each functional area was as follows:urban residential area>agricultural production area>landfill>chemical industrial park>town residential area. The human respiratory exposure risk assessment models showed that the daily intake of AMPs (EDI) for adults and children in urban residential areas was higher than in town residential areas. The atmospheric backward trajectory simulation showed that the AMPs in the districts and counties of Yichang City mainly came from the surrounding areas via short-distance transportation. This study provided basic data support for the research on AMPs in the middle reaches of the Yangtze River and was of great significance for the traceability and health risk research of AMPs pollution.