Application of sourdough in gluten-free bakery products.

ABSTRACTSIn recent years, the demand for gluten-free (GF) bakery products has grown rapidly due to the remarkable rising number of celiac patients and the increasing health awareness of GF products. However, GF products generally suffer from defects such as poor sensorial level, low nutritional value, high prices and short shelf life. Sourdough is the important starter culture applied in bakery field, and it has been proven to be ideal for enhancing the overall quality of bakery products. This review aims to systematically reviewed the application of sourdough in GF bakery products and its improvement to GF bakery products in terms of texture, shelf life, nutrition and flavor. Its positive effects derive from the complex metabolic activities of sourdough microorganisms, such as acidification, proteolysis, production of exopolysaccharides (EPS), activation of endogenous enzymes, and production of antibacterial substances. Finally, researchers are encouraged to expand the use of sourdough in GF bakery products to increase the variety of GF products. And the technical and nutritional potential of sourdough should be developed more widely.

Quantitative microbial spoilage risk assessment of Aspergillus niger in white bread reveal that retail storage temperature and mold contamination during factory cooling are the main factors to influence spoilage.

The present study developed a model for effectively assessing the risk of spoilage caused by Aspergillus niger to identify key control measures employed in bakery supply chains. A white bread supply chain comprising a processing plant and two retail stores in Taiwan was selected in this study. Time-temperature profiles were collected at each processing step in summer and winter. Visual mycelium diameter predictions were validated using a time-lapse camera. Six what-if scenarios were proposed. The mean risk of A. niger contamination per package sold by retailer A was 0.052 in summer and 0.036 in winter, and that for retailer B was 0.037 in summer and 0.022 in winter. Sensitivity analysis revealed that retail storage time, retail temperature, and mold prevalence during factory cooling were the main influencing factors. The what-if scenarios revealed that reducing the retail environmental temperature by 1 °C in summer (from 23.97 °C to 22.97 °C) and winter (from 23.28 °C to 22.28 °C) resulted in a reduction in spoilage risk of 47.0% and 34.7%, respectively. These results indicate that food companies should establish a quantitative microbial risk assessment model that uses real data to evaluate microbial spoilage in food products that can support decision-making processes.

Amelioration of nutritional properties of bakery fat using omega-3 fatty acid-rich edible oils: a review.

Bakery products have gained prominence in modern diets due to their convenience and accessibility, often serving as staple meals across diverse regions. However, the fats used in these products are rich in saturated fatty acids and often comprise trans fatty acids, which are considered as a major biomarker for non-communicable diseases like cardiovascular disorders, obesity and diabetes. Additionally, these fats lack the essential omega-3 fatty acids, which are widely known for their therapeutic benefits. They play a major role in lowering the risk of cardiovascular diseases, cancer and diabetes. Thus, there is need for incorporating these essential fatty acids into bakery fats. Nevertheless, fortifying food products with polyunsaturated fatty acids (PUFAs) poses several challenges due to their high susceptibility to oxidation. This oxidative deterioration leads to not only the formation of undesirable flavors, but also a loss of nutritional value in the final products. This review focuses on the development of healthier trans-fat-free bakery fat enriched with omega-3 fatty acids and its effect on the physicochemical, functional, sensory and nutritional properties of bakery fats and products. Further, the role of various technologies like physical blending, enzymatic interesterification and encapsulation to improve the stability of PUFA-rich bakery fat is discussed, where microencapsulation emerged as a novel and effective technology to enhance the stability and shelf life. By preventing deteriorative changes, microencapsulation ensures that the nutritional, physicochemical and sensory properties of food products remain intact. Novel modification methods like interesterification and microencapsulation used for developing PUFA-rich bakery fats have a potential to address the health risks occurring due to consumption of bakery fat having higher amount of saturated and trans fatty acids. © 2023 Society of Chemical Industry.

Coffee leaf valorisation into functional wheat flour rusk: their nutritional, physicochemical, and sensory properties.

Coffee leaves are currently emerging as a promising agri-food resource rich in phenolics. This study aims to valorise coffee leaf powder (CLP) by incorporating it in refined wheat flour rusk formulations and analyse its physio-chemical, rheological, functional and sensory characteristics. The progressive replacement of CLP improved the dietary fibre (2.51 ± 0.2%), ash (1.09 ± 0.11%), and water absorption capacity (59.7 ± 0.1%) of the flours. It considerably enhanced the falling number and sedimentation values of the flour blends while decreased the loaf volume. Progressive increase in the dietary phenolics (232.21-435.19 mg/100 g), chlorogenic acid (6.0-7.5 mg/100 g), and ABTS antioxidant activity (963.89-1607.25 µMTEAC/g) of the rusks was observed upon CLP addition. Rusks with 3% CLP were found to have significantly acceptable physical and sensory characteristics. Thus, supplementation of CLP in rusk helps in valorising coffee leaves besides providing a functional bakery product to the coffee industry. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-024-05927-z.

Bio-preservatives and essential oils as an alternative to chemical preservatives in the baking industry: a concurrent review.

The use of chemical preservatives in the baking industry is a common practice to extend the shelf life of baked goods However, there is growing interest in natural alternatives due to worries about the security and potential health risks of these chemicals. The purpose of this concurrent review is to investigate the potential of using essential oils and bio-preservatives in place of chemical preservatives in the baking industry. With a focus on their efficiency in extending the shelf life of baked goods, the review includes a thorough analysis of the most recent research on the use of bio-preservatives and essential oils in food preservation. The findings suggest that bio-preservatives and essential oils can be effective in preserving baked goods and may offer a safer and more natural alternative to chemical preservatives. However, further research is needed to fully understand the potential of these natural alternatives and to optimize their use in the baking industry.

Evaluation of lipoproteins and high sensitivity crp in consumers of bakery products.

Background: In recent years, a wider range of bakery products with a lower glycaemic response can be observed in the food industry. This contributes to the provision of a wider range of cereal bakery products. The gradual increase in the consumption of brown bread is significant, but despite this, white bread remains a part of the typical Western diet. Studies showed high intake of carbohydrates increase TG levels by enhancing hepatic synthesis of very low-density lipoprotein (VLDL) and decrease activity of lipoprotein lipase. White bread consumption has been therefore associated with an unhealthy lifestyle. Objective: The aim of this study was to assess the influence of the consumption of gluten bakery products on lipids and inflammatory parameters of the probands. Material and Methods: The monitored group consisted of 30 probands from the general population. The average age of the monitored group was 29.7 years. The intervention dose consisted of a different combination of several types of bakery products containing gluten (bread, pastries, soft pastries) within the individual weeks of consumption, while the intervention lasted 6 weeks. An intervention dose of 150 to 200 g per day was set for women and 200 to 250 g per day for men. Biochemical blood parameters were determined using a fully automatic Biolis 24i Premium blood serum biochemical analyzer, by end-point photometry method. We tested the differences between the biochemic parameters by one-factor analysis of variance (ANOVA) and compared them by Tuckey's Post Hoc Test. Results: The measurement of the lipid profile showed that the average levels of total cholesterol (TC) were above the reference value (<5.00 mmol. l-1) in each of the three performed measurements (P˂0.01). In the case of LDL, we found a similar trend in the development of lipoprotein values, while we positively evaluate a slight reduction of LDL in the measurement immediately after the intervention (P˂0.001). Certain changes during the study were also noted in HDL parameters with high statistical significance (P˂0.001). During the TG analysis, we found that probands have normal values(0.45-2.70 mmol. l-1). A reduction in average TG values was achieved in individual measurements, but without statistical significance (P˃0.05). In high sensitivity CRP (hs-CRP) parameters was achieved a bell curve of the development of average values, with a maximum measured immediately after the intervention. Changes in hs-CRP during the study were without statistical significance (P˃0.05). Conclusions: The measurement of the lipid profile showed that the average levels of TC, LDL and HDL, there were above the reference value in each of the three measurements performed. Through the analysis of TG, we found normal values and during the study there was a slight decrease. Furthermore, we found that intervention with bakery products containing gluten was associated with an increase in hs-CRP levels in our probands.

Faveleira (Cnidoscolus quercifolius Pohl) seed press cake flour: production, characterization and application for use in cookies.

BACKGROUND: Food processing produces large volumes of waste that can be transformed into useful and relevant ingredients. The by-product of oil extraction from faveleira seeds is a potentially low-cost raw material that can be used for obtaining functional foods. This study aimed to analyze the physicochemical properties, chemical composition, and antioxidant activity of faveleira (Cnidoscolus quercifolius Pohl) seed press cake flour (FSPCF). Additionally, the chemical composition, antioxidant activity, and physical, microbiological, and sensory aspects of cookies with 0, 25%, or 50% substitution of refined wheat flour (RWF) with FSPCF (0-FSPCF, 25-FSPCF, and 50-FSPCF cookies, respectively) were evaluated. RESULTS: FSPCF exhibited good physicochemical properties, high antioxidant activity (0.45 ± 0.00 and 42.83 ± 1.30 g TE g-1 for the DPPH and ABTS methods, respectively), and high polyphenol content (particularly gallic acid at 21015.85 ± 4981.76 g kg-1 ) and is also rich in minerals and fiber (359.40 ± 1.10 g kg-1 ). Replacement of RWF with FSPCF increased the activity of antioxidants and the levels of polyphenols, ash, lipids, proteins, and fibers. The 50-FSPCF cookie possessed the highest linoleic acid content (97.50 ± 8.47 g kg-1 ). Flour replacement influenced the weight of the cookies without affecting the other physical characteristics. The cookies yielded good sensory acceptance and purchase intentions. Contamination was not detected. CONCLUSION: Faveleira flour possesses high nutritional and bioactive value and can be used as a functional ingredient in cookies and possibly in other bakery products such as bread, cakes, and pastas. © 2022 Society of Chemical Industry.

Almond okara as a valuable ingredient in biscuit preparation.

BACKGROUND: The okara is the water-insoluble residue derived from the production of plant-based beverages, including almond milk. Information on almond okara is scarce, with no scientific references. In the present study, the almond okara was characterized and used to replace wheat flour at 15%, 25% and 35% for biscuit preparation. RESULTS: The contents of protein, lipid and dietary fiber of almond okara were 140.08, 421.16 and 407.90 g kg-1 dry matter, respectively. The lipid fraction of almond okara showed contents of triacylglycerol oligopolymers and oxidized triacylglycerols of 0.12 and 5.14 g kg-1 , respectively, which were significantly lower than the levels observed in the sunflower oil used in the formulation of biscuits. Consequently, the biscuits containing okara showed a content of triacylglycerol oligopolymers lower than that of control biscuits. The texture analysis revealed that the addition of the okara at 25% and 35% caused a significant increase in biscuit hardness and a reduction of the brittleness, compared to the control. The sensory evaluation confirmed these data, highlighting the slight impact of the almond okara on the almond odor, taste and flavor attributes. CONCLUSION: Almond okara is a valuable by-product that can be easily used as an ingredient for biscuit preparation, exploiting its fiber, protein and lipid content to improve the nutritional value of food, with a limited impact on the sensory properties. © 2022 Society of Chemical Industry.

Upcycling soy processing waste (okara) into structured emulsions for fat replacement in sweet bread.

BACKGROUND: Okara is the main waste of soy processing and represents a large economic and environmental burden. Nevertheless, the fibre and protein content of okara supports the upcycling of this critical waste. This study aimed at assessing the potentialities of okara as an innovative oil-structuring ingredient. RESULTS: Structured emulsions containing up to 520 g oil kg-1 and having oil holding capacity higher than 75% were prepared by high-shear mixing of okara with liquid oil. Microstructural analysis showed that the oil phase was evenly distributed in the okara matrix, probably due to the emulsification ability of the okara fibre-protein network. The performance of okara structured emulsions as palm margarine replacer were tested in the preparation of sweet bread. Okara emulsions (500 g oil kg-1 ) resulted not only in a significant reduction of saturated fatty acids (>50%), but also in an increased protein and fibre content. Compared to the use of liquid oil solely, okara emulsions allowed reducing the oil released from bread loaf. Bread containing okara emulsion also presented physical and sensory properties similar to those of palm margarine bread, the only exception being a more perceivable oiliness and rancid defect, which are, however, easily preventable by applying appropriate formulation strategies. CONCLUSION: The use of okara as innovative ingredient for oil structuring would answer the current demand for sustainable heathy diets, based on clean-label foods with low-saturated fat content, and increased protein and fibre supply. This approach would also allow the complete upcycling of this critical waste. © 2022 Society of Chemical Industry.

Cassava starch and chickpea flour pre-treated by microwave as a substitute for gluten-free bread additives.

There is an increasing demand for gluten-free products, which are regularly made by a combination of ingredients and additives. Microwave pre-treatment of gluten-free ingredients is an alternative to food additives because it may induce changes in protein and starch functional properties. In this context, this study aimed to apply microwave treatment in cassava starch and chickpea flour, analyzing their functional and thermal properties and their ability to substitute additives in gluten-free breads, comparing them to an additive-containing bread. All formulations were analyzed regarding their physical characteristics and quality parameters. The microwave-treated ingredients showed color, thermal properties and morphology changes. The bread made with chickpea flour treated with initial moisture of 40% showed the best quality parameters when compared to the control bread. The ingredients pre-treated with microwave have shown efficiency on gluten-free bakery additives substitution, allowing the use of a clean label terminology.

Effect of extrusion process on the obtention of a flour from coffee pulp Coffea arabica variety red Caturra and its use in bakery products.

The main waste in the coffee industry is the coffee pulp (CP), an interesting source of fiber and phenolic compounds. An alternative for its harnessing can be its transformation into a flour for human consumption, generating added value for a circular economy. The aim of this study was to obtain flour from CP (CPF) using extrusion and the evaluation of its incorporation into a bakery product. Extrusion treatments to get a flour were explored by a factorial design 23, considering the temperature, moisture, and extruder screw revolutions (rpm). Treatments were evaluated for their effects on the proximal composition, phytic acid, caffeine, and phenolic compounds contents of the flours, and baking characteristics such as water absorption (WAI) and water solubility index (WSI). Once the best extrusion treatment was selected, bread formulations were developed, two wheat-based and two gluten-free, which were evaluated using "Flash Profiling". Extrusion treatment 110 °C, 35% moisture, and 17.5 rpm, was selected as the best one to get a flour with good functional properties (WAI:2.94 ± 0.13, WSI:21.02 ± 3.27) and a content of phenolic compounds: 55.14 mg/g and caffeine:14.23 mg/g. Sensorially, good acceptance, up to 15% substitution by flour, was achieved. Extruded CPF could be a food ingredient, at least in bakery products, contributing in the practice of a circular economy. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05797-x.

Heat and shear stability of particle stabilised foams for application in gluten-free bread.

Bread forms an integral part of the daily diet in many cultures worldwide. At the same time, a significant number of people try to avoid wheat-based products for either health reasons or due to personal preferences. The absence of a protein network in gluten free bread affects its structure, taste, texture and shelf-life. This paper suggests a technological solution to this issue that uses a pre-foamed mass of gluten free raw materials which is mixed with the bread's ingredients, then kneaded and baked to form a high quality gluten free bread. To survive the high shear stresses during kneading and temperature increase during baking, the foam requires exceptional stability. This stability was achieved through particle stabilisation of the bubble interfaces. Both of the tested foams (with and without particles) exhibited thermal stability up to 80 °C. However, resistance to shear stresses was higher in the particle stabilised foams. Of all the tested particles, linseed press cake and banana powder led to the best results. In conclusion, particle stabilised foams seem very well suited to applications in gluten free baked goods. Further application potential is seen for vegan foamed desserts.

Cookies and muffins containing biosurfactant: textural, physicochemical and sensory analyses.

Interest in products with more natural ingredients increases the potential for application of Biosurfactants in foods. The aim of the present study was to assess the toxicity of biosurfactant produced by Saccharomyces cerevisiae URM6670 and the effect of the incorporation of this biosurfactant on the physicochemical and textural characteristics of cookies and muffins, performing unprecedented assessment of the sensorial effects of this application. The toxicity analysis revealed that the biosurfactant is classified as a mild irritant, with irritation indices lower than 4.9. The physical analysis of the incorporation of the biosurfactant in the formulation revealed that the addition of 1% to cookies significantly increased the diameter and spread factor. In muffins, significant changes in these properties were found beginning at 0.25% biosurfactant. The moisture content in cookies was reduced by a maximum of 74%, while in muffins this reduction was approximately 6%. The lipid content increased significantly with the addition of 1% of the biosurfactant (11% in cookies and 25% in muffins). The textural analysis revealed that the biosurfactant at 1% led to a significant increase in firmness as a consequence of the reduction in the moisture content. In muffins, the same concentration increased the firmness and variables related to chewability. The sensory analysis revealed that the muffins with biosurfactant had greater acceptance compared to the cookies. Thus, the biosurfactant demonstrated potential application in bakery products due to low toxicity and positive evaluation in important sensorial parameters for its commercialisation.

The effect of 6-week consumption of bakery products on changes in selected anthropometric parameters in women.

Background: The changes in consumers' eating habits are one of the most important factors affecting the consumption of selected foods. The most important factors for bakery products consumers are freshness, taste, price, durability, composition, and country of origin. Objective: The aim of this study was to monitor changes in selected anthropometric characteristics in women from the general population in Slovakia, after 6 weeks of bakery products consumption. Material and Methods: The study was conducted on healthy adult women from the general population (n=78), who were divided into four subgroups ("gluten" group, "gluten-free" group, "whole-grain" group and "control" group). The intervention dose consisted of a different combination of several types of bakery products (bread, pastries, soft pastries) within the individual weeks of consumption, while the intervention lasted 6 weeks, women consumed 150-200 grams per day. Anthropometric characteristics were measured by body composition analyser InBody 720 (Biospace Co. Ltd., Seoul, Republic of Korea), which works on the principle of bioelectrical impedance analysis. We also used the Lookin´Body 3.0 software to process the results. The collected data from these measurements were evaluated statistically and graphically in Microsoft Office Excel 2010 (Los Angeles, CA, USA). The levels of statistical significance were set at P<0.05 (*); P<0.01 (**); P<0.001 (***). Differences among subgroups of probands were tested with Pared Student t-test. Results: The amount of fat mass (FM) in the participants changed along a similar curve as their body weight. After the 6-week intervention, there was a slight decrease in FM with statistical significance (P<0.01). In the third measurement, i.e., two months after the intervention, there was an increase in the amount of FM, but without statistical significance. Fat free mass (FFM) values in women increased very slightly after 6 weeks of consumption and remained approximately at the same level two months after the intervention (without statistical significance). We noted the most significant changes in the visceral fat area (VFA) parameter, which had a steadily increasing tendency. Changes in VFA values were statistically significant after the 6-week intervention (P<0.01) and also after two months of the intervention (P<0.05). Conclusions: Changes in body composition in women were noted already after 6 weeks of bakery products consumption, especially in the FM, FFM, VFA and partially BMI parameters, but no changes were recorded in the WHR parameters during the entire duration of the study. One of the most significant results is the finding that there was an increase in VFA when consuming all types of bakery products (gluten, gluten-free and whole grain).

[Determination of toxic element concentrations in flour and cereal products by mass spectrometry with inductively coupled plasma].

Systemic control and monitoring in the sphere of providing sanitary epidemiological welfare of population require routine procedures for determining toxic elements in variable foodstuffs. Their development is a pressing issue. Our research goal was to develop a procedure for determining concentrations of arsenic, cadmium, lead, mercury, aluminum and strontium in flour and cereal products by mass spectrometry with inductively coupled plasma. Material and methods. The most relevant calibration parameters for an Agilent 7900 mass spectrometer with octopole collision/ reaction cell and conditions for sample preparation by microwave digestion have been established; calibration characteristics and a range of determined concentrations have been identified. The limits of detections (LOD) and limits of quantification (LOQ) for 6 analyzed elements have been calculated. Results. Our procedure for determining mass concentrations of arsenic, cadmium, lead, mercury, aluminum and strontium in flour and cereal products by mass spectrometry with inductively coupled plasma has yielded the following results: when analyzing a sample weighing 0.5 g, we determine cadmium concentration within a range from 0.0008 to 70.0 mg/kg with inaccuracy from 14 to 25%; arsenic concentration within a range from 0.002 to 70 mg/kg with inaccuracy varying from 11 to 26%; mercury concentration from 0.003 to 7.0 mg/kg with inaccuracy from 15 to 25%; lead concentration from 0.01 to 70.0 mg/kg with inaccuracy from 12 to 26%; aluminum concentration from 0.2 to 70.0 mg/kg with inaccuracy from 13 to 20%; strontium concentration from 0.02 to 70 mg/kg with inaccuracy from 12 to 20%. The procedure was tested on samples of rice groats with the focus on the most popular brands. Thus, arsenic was detected in a concentration equal to 0.163 mg/kg in round-grain rice and 0.098 mg/kg in parboiled rice, which does not exceed the permissible level fixed for the element at 0.2 mg/kg. In all the analyzed samples, content of cadmium, lead and mercury did not exceed maximum permissible levels established by the Technical regulation of the Customs Union TR CU 021/2011 for flour and cereal products. These levels are 0.1 mg/kg for cadmium, 0.5 mg/kg for lead and 0.03 mg/kg for mercury. Conclusion. The developed procedure for determining toxic elements in flour, cereals and bakery products by using mass spectrometry with inductively coupled plasma gives an opportunity to determine such elements in quantities lower than permissible levels fixed for them in technical regulations and sanitary rules. The procedure expands the existing methodical instruments for control of food quality in the Russian Federation.

Microbiological quality of some packed and unpacked bread products in Alexandria, Egypt.

BACKGROUND: Bakery products are important food snacks consumed by people of all ages and economic groups. The growth of unwanted microorganisms that deteriorate products such as bacteria, moulds, and fungi in these foodstuffs may offer risks to consumers' health and generate considerable economic losses. This work aimed to assess the microbiological quality of some packed and unpacked bread products in Alexandria, Egypt. METHODS: This cross-sectional comparative study involved 168 local and branded bakery products that were collected randomly from 2 districts in Alexandria. Hygienic practices such as covering of the bread and wearing gloves during handling were observed and recorded. All bread samples were tested to determine the total plate count (TPC), presence/absence of Staphylococcus aureus (S. aureus), total yeasts and moulds in CFU/g and total coliform count (TC) in MPN/g. RESULTS: The mean of the total yeasts and moulds and TC in the packed bread was lower than that of the unpacked bread (3.40 × 103 CFU/g and 3.25 MPN/g versus 6.37 × 103 CFU/g and 31.61 MPN/g, respectively). However, the mean of TPC in the packed bread was higher than that of the unpacked bread (1.39 × 106 versus 2.07 × 105 CFU/g, respectively). The mean TPC, total yeasts and moulds and TC was higher in the studied flatbread than Fino bread and toast (3.4 × 106, 1.14 × 104 CFU/g and 24.6 MPN/g, respectively). The presence of S. aureus was higher in flat, unpacked bread, bread displayed outside the shop and handled without gloves. CONCLUSION: Bread produced by local bakeries showed lower standards in packaging and microbial quality. Better manufacturing, packaging, storage, and handling initiatives should be introduced to avoid related food safety concerns in the future. The formal authorities should define and clarify standards and rules on bread safety.

Gels as fat replacers in bakery products: a review.

Several strategies have been studied to replace or decrease fat content in bakery products aiming improving their nutritional profile. This paper reviewed the effect of different vehiculization systems (hydrogels, emulgels and oleogels) as fat replacers in different types of bakery goods, focusing on technological and nutritional properties of the reformulated products. The most commonly used fat source for replacement purposes were vegetable oils with high monounsaturated fatty acid content, such as olive oil and canola oil (44% of the revised papers used them), whereas high polyunsaturated fatty acid content oils were used in 34% of papers. Oleogelation was the most frequent used method of oil structuring, using waxes and fibers as stabilizers. Reductions of total fat between 19% and 46% and saturated fatty acid between 33% and 87% were achieved, enough to reach the minimum legal limit to state nutrition claims, under the EU legislation, on several products. Sensory evaluation results showed that partially replaced products (<75% replacement) were more appreciated by panelists than fully replaced ones. This review highlights the wide range of alternatives within gel-like fat replacers, that have potential to be applied in different bakery products and the challenge to produce nutritionally enhanced foods and technologically and sensory acceptable.

Psyllium: a useful functional ingredient in food systems.

Psyllium gum is a hydrocolloid found in the husk of seeds from Plantago ovata. Psyllium husk has been used in traditional medicine in areas of India and China. Its consumption has been shown to provide nutritional benefits, such as the capacity to reduce the glycaemic index, to minimize the risk of cardiovascular diseases, to decrease cholesterol and constipation problems and others. Thus, interest in the incorporation of psyllium in food products is twofold. First, it can be a natural alternative to the use of other gums and hydrocolloids considered additives. Second, it can be used to improve the nutritional properties of products in which it is incorporated. However, for this purpose, it is necessary to add great quantities of psyllium. This review analyses the potential use of psyllium in distinct food products, considering its advantages and inconveniences as well as possible solutions for undesired effects. Among the analyzed products there are bakery products and, in particular, gluten-free breads where psyllium has been used as a gluten substitute. The incorporation of psyllium into dairy products such as yogurts and those derived from fruits, among others, is also addressed.

16S rRNA Based Profiling of Bacterial Communities Colonizing Bakery-Production Environments.

Conventional culture-based techniques are largely inadequate in elucidating the microbiota contained in an environment, due to low recovery within a complex bacterial community. This limitation has been mitigated by the use of next-generation sequencing (NGS)-based approaches thereby facilitating the identification and classification of both culturable and uncultivable microorganisms. Amplicon targeted NGS methods, such as 16S ribosomal RNA (16S rRNA) and shotgun metagenomics, are increasingly being applied in various settings such as in food production environments to decipher the microbial consortium therein. Even though multiple food matrices/food production environments have been studied, the low-moisture environment associated with bakery food production remains to be investigated. To address this knowledge gap, in this study, we investigated the microbiome associated with two bakery production sites (designated as A and B) located in Ireland using 16S rRNA-amplicon-based sequencing. Amplicons corresponding to a hypervariable region contained within the 16S rRNA gene were amplified from DNA samples purified from environmental swabs and ingredients collected at both sites at various stages (preparation, production, postproduction, and storage) across the bakery production chain, over three seasons (winter, spring, and summer). These amplicons were sequenced, and data were analyzed using the mothur pipeline and visualized using MicrobiomeAnalyst and a series of R packages. The top seven bacterial phyla identified at both sites were composed of Proteobacteria, Firmicutes, Actinobacteria, Bacteroidetes, Deinococcus-Thermus, Patescibacteria, and Verrucomicrobia. In addition, the phyla Tenericutes (Mycoplasmatota) and Acidobacteria were observed only in samples taken at site B. Different bacterial compositions were identified at each stage of production. These same bacteria were also found to be present in the final processed food suggesting the influence of the environment on the food matrix. This study is the first demonstration of the utility of 16S rRNA amplicon-based sequencing to describe the microbiota associated with bakery processing environments.

Effect of inclusion of bakery by-products in the dairy cow's diet on milk fatty acid composition.

Bakery by-products (BP), rich in fats and sugars, are unconventional feed sources for cows whose effects on milk fat composition have not yet been evaluated. This research paper aimed to assess the effects of dietary BP inclusion rate and feeding period on the milk fatty acid composition. Twenty-four Simmental cows were fed a diet without BP (CON) for 1 week. Then they either continued with the CON diet or switched to one of the BP diets (with 15% or 30% BP in diet dry matter) for 3 weeks. Milk samples were taken before diet change and three times during BP feeding and analysed for fatty acid composition. Data showed that increasing BP content in the diet increased total fatty acid intake, especially of 18 : 1 n9. In the milk fat, the percentages of total monounsaturated fatty acids especially of the 18 : 1 origin linearly increased with increasing dietary BP level. The percentage of fatty acids de novo synthesized in the mammary gland (the sum of 4 : 0-14 : 0) remained similar among diets (32-34% of total fatty acids). The 16 : 0 percentage dropped from 32.5 to 29.6% and from 33.6 to 28.3% for 15% and 30% BP, respectively. Only 30% BP elevated the percentage of conjugated linoleic acids (CLA: by 59%) compared with CON throughout the 3 weeks. Proportions of 18 : 2 n6 and 18 : 3 n3 and the n6:n3 ratio were unaffected by BP and feeding time. BP feeding improved all those estimated health indices of the milk fat that are suggested to be related to coronary health. In summary, the inclusion of BP in dairy rations beneficially shifted the milk fatty acid profile to more 18 : 1 fatty acids at the expense of 16 : 0. At a 30% inclusion rate, BP feeding showed an additional benefit of increased CLA content in milk fat.