Optimizing bone and biomass co-torrefaction parameters: High-performance arsenic removal from wastewater via co-torrefied bone char.

This study aimed to investigate bone char's physicochemical transformations through co-torrefaction and co-pyrolysis processes with biomass. Additionally, it aimed to analyze the carbon sequestration process during co-torrefaction of bone and biomass and optimize the process parameters of co-torrefaction. Finally, the study sought to evaluate the arsenic sorption capacity of both torrefied and co-torrefied bone char. Bone and biomass co-torrefaction was conducted at 175 °C-300 °C. An orthogonal array of Taguchi techniques and artificial neural networks (ANN) were employed to investigate the influence of various torrefaction parameters on carbon dioxide sequestration within torrefied bone char. A co-torrefied bone char, torrefied at a reaction temperature of 300 °C, a heating rate of 15 °C·min-1, and mixed with 5 g m of biomass (wood dust), was selected for the arsenic (III) sorption experiment due to its elevated carbonate content. The results revealed a higher carbonate fraction (21%) in co-torrefied bone char at 300 °C compared to co-pyrolyzed bone char (500-700 °C). Taguchi and artificial neural network (ANN) analyses indicated that the relative impact of process factors on carbonate substitution in bone char followed the order of co-torrefaction temperature (38.8%) > heating rate (31.06%) > addition of wood biomass (30.1%). Co-torrefied bone chars at 300 °C exhibited a sorption capacity of approximately 3 mg g-1, surpassing values observed for pyrolyzed bone chars at 900 °C in the literature. The findings suggest that co-torrefied bone char could serve effectively as a sorbent in filters for wastewater treatment and potentially fulfill roles such as a remediation agent, pH stabilizer, or valuable source of biofertilizer in agricultural applications.

Preparation, characterisation and applications of bone char, a food waste-derived sustainable material: A review.

The production of increasing quantities of by-products is a key challenge for modern society; their valorisation - turning them into valuable compounds with technological applications - is the way forward, in line with circular economy principles. In this review, the conversion of bones (by-products of the agro-food industry) into bone char is described. Bone char is obtained with a process of pyrolysis, which converts the organic carbon into an inorganic graphitic one. Differently from standard biochar of plant origin, however, bone char also contains calcium phosphates, the main component of bone (often hydroxyapatite). The combination of calcium phosphate and graphitic carbon makes bone char a unique material, with different possible uses. Here bone chars' applications in environmental remediation, sustainable agriculture, catalysis and electrochemistry are discussed; several aspects are considered, including the bones used to prepare bone char, the preparation conditions, how these affect the properties of the materials (i.e. porosity, surface area) and its functional properties. The advantages and limitations of bone chars in comparison to traditional biochar are discussed, highlighting the directions the research should take for bone chars' performances to improve. Moreover, an analysis on the sustainability of bone chars' preparation and use is also included.

Evaluation of the suitability of integrated bone char- and biochar-treated groundwater for drinking using single-factor, Nemerow, and heavy metal pollution indexes.

The treatment of contaminated groundwater using integrated bone char and biochar beds has been studied. The bone char and biochar were made in a locally built double-barrel retort utilising cow bones, coconut husks, bamboo, neem trees, and palm kernel shells at 450 °C and were graded into 0.05- and 0.315-mm sizes. Eight groundwater treatment experiments (BF2-BF9) were performed in columns with bed heights of 8.5-16.5 cm to remove nutrients, heavy metals, microorganisms, and interfering ions from groundwater using bone char, biochar, and a combination of bone and biochar. The water samples were analysed for twenty-one water quality parameters including pH, total dissolved solids, conductivity, turbidity, fluoride, chloride, sodium, and potassium. The rest were total coliforms, faecal coliforms, total heterotrophic bacteria, Escherichia coli, manganese, and total iron. The effectiveness of the treatment processes was assessed using the Ghana standard authority and the World Health Organisation's recommended values for drinking water quality. The results were shared using a simplified single-factor index, Nemerow's pollution index, and a heavy metal pollution index with decision-makers as a technology for groundwater treatment in rural communities in Africa. Bone char was more effective in removing total heterotrophic bacteria than any of the other treatment agents tested. This is because of its compact nature and small particle size. The quality of water treated by BF3, BF5, BF6, BF7, BF8, and BF9 was fit for drinking based on the single-factor and heavy-metal pollution evaluation because they have the lowest level of pollution. However, Nemerow pollution analysis found only BF5 to be the most suitable for public use.

A highly porous animal bone-derived char with a superiority of promoting nZVI for Cr(VI) sequestration in agricultural soils.

Paddy soil and irrigation water are commonly contaminated with hexavalent chromium [Cr(VI)] near urban industrial areas, thereby threatening the safety of agricultural products and human health. In this study, we develop a porous and high specific area bone char (BC) to support nanoscale zero-valent iron (nZVI) and apply it to remediate Cr(VI) pollution in water and paddy soil under anaerobic conditions. The batch experiments reveal that BC/nZVI exhibits a higher removal capacity of 516.7 mg/(g•nZVI) for Cr(VI) than nZVI when normalized to the actual nZVI content, which is 2.8 times that of nZVI; moreover, the highest nZVI utilization is the nZVI loading of 15% (BC/nZVI15). The Cr(VI) removal efficiency of BC/nZVI15 decreases with increasing pH (4 - 10). Coexisting ions (phosphate and carbonate) and humic acid can inhibit the removal of Cr(VI) with BC/nZVI15. Additionally, BC exhibits a strong advantage in promoting Cr(VI) removal by nZVI compared to the widely used biochar and activated carbon. Our results demonstrate that reduction and coprecipitation are the dominant Cr(VI) removal mechanisms. Furthermore, BC/nZVI15 shows a significantly higher reduction and removal efficiency as well as a strong anti-interference ability for Cr(VI) in paddy soil, as compared to nZVI. These findings provide a new effective material for remediating Cr(VI) pollution from water and soil.

Use of bone char prepared from an invasive species, pleco fish (Pterygoplichthys spp.), to remove fluoride and Cadmium(II) in water.

In this study, bone char (BC) from pleco fish (Pterygoplichthys spp.) was synthesized, and their textural and physicochemical properties, as well as its adsorption capacity towards fluoride and Cd(II) from single and binary aqueous solutions, were determined. The results showed that the properties of the BCs were independent of the type of bone used and the surface areas were close to 110 m2 g-1. The effect of solution pH revealed that the adsorption capacity of BC towards fluoride from water raised by decreasing the solution pH. This trend was attributed to the electrostatic interaction between the positively charged surface and the fluoride in aqueous solution. On the contrary, the capacity of BC for adsorbing Cd(II) was enhanced by increasing the solution pH, indicating that electrostatic interactions were also essential but with a contrary effect in comparison with fluoride adsorption due to the negatively charged surface at pH above the point zero charge (pHPZC = 8.16). The experimental data for binary adsorption of fluoride and Cd(II) were interpreted satisfactorily using the modified Freundlich multicomponent isotherm (EFMI), and the experimental data revealed that Cd(II) have an antagonistic effect on the adsorption of fluoride, whereas the presence of fluoride does not affect the capacity of BC for adsorbing Cd(II). Thermogravimetric, XRD diffraction and IR spectroscopy analysis corroborated that the adsorption of fluoride in BC is due to electrostatic attractions, ion exchange or chemisorption and physisorption. Besides, the removal of Cd(II) occurs by physical adsorption and ion exchange. It was concluded that BC is an alternative material for the removal of fluoride and Cd(II) from aqueous solutions, and it is a possible application for using the bones of this invasive fish species.

Lead sorption characteristics of various chicken bone part-derived chars.

Recycling food waste for beneficial use is becoming increasingly important in resource-limited economy. In this study, waste chicken bones of different parts from restaurant industry were pyrolyzed at 600 °C and evaluated for char physicochemical properties and Pb sorption characteristics. Lead adsorption isotherms by different chicken bone chars were carried out with initial Pb concentration range of 1-1000 mg L-1 at pH 5. The Pb adsorption data were better described by the Langmuir model (R2 = 0.9289-0.9937; ARE = 22.7-29.3%) than the Freundlich model (R2 = 0.8684-0.9544; ARE = 35.4-72.0%). Among the chars derived from different chicken bone parts, the tibia bone char exhibited the highest maximum Pb adsorption capacity of 263 mg g-1 followed by the pelvis (222 mg g-1), ribs (208 mg g-1), clavicle (179 mg g-1), vertebrae (159 mg g-1), and humerus (135 mg g-1). The Pb adsorption capacities were significantly and positively correlated with the surface area, phosphate release amount, and total phosphorus content of chicken bone chars (r ≥ 0.9711). On the other hand, approximately 75-88% of the adsorbed Pb on the chicken bone chars was desorbable with 0.1 M HCl, indicating their recyclability for reuse. Results demonstrated that chicken bone char could be used as an effective adsorbent for Pb removal in wastewater.

Bone char with antibacterial properties for fluoride removal: Preparation, characterization and water treatment.

In the present work, it was established a new method for the preparation of bone chars with a double purpose, i.e., the removal of fluoride from water and the antibacterial character. These adsorbents were obtained by doping a commercial bone char with Ag using different reagents. The optimal conditions for the enrichment with silver were established by following the Taguchi method and using as response variable the removal of fluoride from water. Optimal bone chars were thus prepared and they were characterized using FT-IR spectroscopy, SEM/EDX analysis, adsorption isotherms of N2 at -196 °C and X-ray diffraction. All adsorbents were used in the removal of fluoride from water and the antibacterial character was assessed using the technique of total viable count employing standard solutions of Escherichia coli and drinking water. Results clearly indicated that doping of bone chars with silver provides with suitable antibacterial properties, however the fluoride adsorption capacity was not affected by the presence of Ag° on the carbon surface.

Recycling slaughterhouse waste into fertilizer: how do pyrolysis temperature and biomass additions affect phosphorus availability and chemistry?

BACKGROUND: Pyrolysis of slaughterhouse waste could promote more sustainable phosphorus (P) usage through the development of alternative P fertilizers. This study investigated how pyrolysis temperature (220, 350, 550 and 750 °C), rendering before pyrolysis, and wood or corn biomass additions affect P chemistry in bone char, plant availability, and its potential as P fertilizer. RESULTS: Linear combination fitting of synchrotron-based X-ray absorption near edge structure spectra demonstrated that higher pyrolysis temperatures decreased the fit with organic P references, but increased the fit with a hydroxyapatite (HA) reference, used as an indicator of high calcium phosphate (CaP) crystallinity. The fit to the HA reference increased from 0% to 69% in bone with meat residue and from 20% to 95% in rendered bone. Biomass additions to the bone with meat residue reduced the fit to the HA reference by 83% for wood and 95% for corn, and additions to rendered bone by 37% for wood. No detectable aromatic P forms were generated by pyrolysis. High CaP crystallinity was correlated with low water-extractable P, but high formic acid-extractable P indicative of high plant availability. Bone char supplied available P which was only 24% lower than Triple Superphosphate fertilizer and two- to five-fold higher than rock phosphate. CONCLUSION: Pyrolysis temperature and biomass additions can be used to design P fertilizer characteristics of bone char through changing CaP crystallinity that optimize P availability to plants.

Influence mechanism of anions on iron doping into swine bone char: Promoting non-radical oxidation of acetaminophen in a Fenton-like system.

The application of iron-doped biochar in peroxymonosulfate (PMS) activation systems has gained increasing attention due to their effectiveness and environmental friendliness in addressing environmental issues. However, the behavioral mechanism of iron doping and the detailed 1O2 generation mechanism in PMS activation systems remain ambiguous. Here, we investigated the effects of three anions (Cl-, NO3-and SO42-) on the process of iron doping into bone char, leading to the synthesis of three iron-doped bone char (Fe-ClBC, Fe-NBC and Fe -SBC). These iron-doped bone char were used to catalyze PMS to degrade acetaminophen (APAP) and exhibited the following activity order: Fe-ClBC > Fe-NBC > Fe-SBC. Characterization results indicated that iron doping primarily occurred through the substitution of calcium in hydroxyapatite within BC. In the course of the impregnation, the binding of SO42- and Ca2+ hindered the exchange of iron ions, resulting in lower catalytic activity of Fe-SBC. The primary reactive oxygen species in the Fe-ClBC/PMS and Fe-NBC/PMS systems were both 1O2. 1O2 is produced through O2•- conversion and PMS self-dissociation, which involves the generation of metastable iron intermediates and electron transfer within iron species. The presence of oxygen vacancies and more carbon defects in the Fe-ClBC catalyst facilitates 1O2 generation, thereby enhancing APAP degradation within the Fe-ClBC/PMS system. This study is dedicated to in-depth exploration of the mechanisms underlying iron doping and defect materials in promoting 1O2 generation.

Impact of some amendments on kinetics of leaching dissolved organic carbon and ammonium in calcareous sandy soil under vinasse addition.

The access of vinasse leachates to water bodies and groundwater exacerbates environmental problems, especially eutrophication. Therefore, a column experiment was performed to examine the effect of adding zeolite (ZL), bone char (BC), and wood chips biochar (WCB) in the presence of vinasse on carbon dioxide (CO2) emission, leaching dissolved organic carbon (DOC) and ammonium (NH4+) in calcareous sandy soil, as well as studying the kinetics of leaching dissolved organic carbon and ammonium. This column experiment contains four treatments: soil alone (CK), soil + zeolite (SZL), soil + bone char (SBC), and soil + wood chips biochar (SWCB). These amendments were applied to the soil at a level of 4%. Vinasse was added to all treatments at a level of 13 mL per column. The leached total cumulative DOC and total cumulative soluble ammonium amounts decreased significantly with applying ZL, BC, and WCB compared with the soil alone. The effectiveness of these amendments in lowering the total cumulative DOC leaching is in the order of SBC > SWCB > SZL > CK. However, the effectiveness of these amendments in decreasing the total cumulative NH4+ leaching is in the order of SZL > SWCB > SBC > CK. The rate constant (k) of DOC leaching decreased significantly with the application of bone char compared to soil alone treatment. In the presence of vinasse, the apparent half-life of leached DOC from the soil was 8.1, 12.9, 36.7, and 15.5 days for soil CK, SZL, SBC, and SWCB treatments, respectively. Half-life values of leached soluble ammonium from the soil in the presence of vinasse addition were 10.1, 39.5, 28.5, and 37.9 days for CK, SZL, SBC, and SWCB treatments, respectively. Amending soil with BC increased significantly the phosphorus availability, however, applying ZL and BC caused a significant increase in the available potassium in calcareous sandy soil compared to the control treatment. According to these results, it is recommended not to add vinasse alone to sandy soils, but it is preferred to be co-applied with BC amendment at the level of 4% better than ZL and WCB. This would decrease leaching DOC and ammonium to the water table and groundwater as well as enhance nutrient retention in the soil, which in turn, plays a vital role in reducing the harmful effect of vinasse and improving soil fertility.

A Novel Method for the Enhancement of Sunflower Growth from Animal Bones and Chicken Feathers.

The present study aimed at converting meat industry waste, particularly waste bones and chicken feathers, into biochar to recycle valuable nutrients present in it, which ultimately become part of the municipal waste. The bone biochar (BB) and feathers biochar (FB) were prepared at 550 °C, and their potential was evaluated as an organic amendment for the growth of sunflower. The ash content (AC) and fixed carbon (FC) improved significantly in prepared biochars as compared to raw feedstock. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) analyses signaled the occurrence of various functional groups viz. amide group and hydroxyapatite, porosity, and multiple nutrients. Application of BB and FB in potted soil alone as well as in composites (1:1, 1:2, 2:1) at 1%, 3%, and 5% (w/w) and synthetic fertilizer significantly increased soil pH, electrical conductivity (ECe), organic matter (OM) and water holding capacity (WHC), while reducing the bulk density (BD). The growth of plants grown in soil treated with a 2:1 composite of feathers and bone biochar at 5% application rate showed significantly greater differences in plant height, total chlorophyll content, and plant dry weight than the control but was comparable to growth with chemical fertilizer, rendering it a potential alternative to chemical-based synthetic fertilizer.

A comprehensive review of bone char: Fabrication procedures, physicochemical properties, and environmental application.

Bone waste from slaughtering is an abundant but underutilized resource. Promoting its exploitation can reduce the environmental burden and achieve energy recovery. Bone char, a solid material prepared by the thermochemical conversion of animal bone, has a unique and rich mesoporous structure and ionic polarity sites. It has shown great potential for application. This review aims to provide information about the thermochemical conversion method of recycling waste bone to fabricate bone char and, on its basis, to summarize comprehensive data on the physicochemical properties to provide direction and theoretical support for the tailored environmental remediation applications. Therefore, the authors first elucidated the various influencing effects (e.g., bone type, pyrolysis atmosphere and temperature, etc.) and modification treatments (physical and chemical methods) during the fabrication of bone char. Secondly, the physicochemical properties (including but not limited to pore structure, elemental composition, surface functional groups, pH and ash content, etc.) of bone char are comprehensively discussed for the first time. Further, the development process of bone char applied as adsorbents and catalytic supports for environmental remediation (decolorization of sugar liquor, drinking water defluoridation, removal of heavy metals and organic pollutants) is presented, revealing the behaviors and mechanisms of pollutant removal by bone char. Finally, the authors present the prospects and challenges of developing bone char into a green and sustainable environmentally friendly material.

A comprehensive study of artificial neural network for sensitivity analysis and hazardous elements sorption predictions via bone char for wastewater treatment.

Using bone char for contaminated wastewater treatment and soil remediation is an intriguing approach to environmental management and an environmentally friendly way of recycling waste. The bone char remediation strategy for heavy metal-polluted wastewater was primarily affected by bone char characteristics, factors of solution, and heavy metal (HM) chemistry. Therefore, the optimal parameters of HM sorption by bone char depend on the research being performed. Regarding enhancing HM immobilization by bone char, a generic strategy for determining optimal parameters and predicting outcomes is crucial. The primary objective of this research was to employ artificial neural network (ANN) technology to determine the optimal parameters via sensitivity analysis and to predict objective function through simulation. Sensitivity analysis found that for multi-metals sorption (Cd, Ni, and Zn), the order of significance for pyrolysis parameters was reaction temperature > heating rate > residence time. The primary variables for single metal sorption were solution pH, HM concentration, and pyrolysis temperature. Regarding binary sorption, the incubation parameters were evaluated in the following order: HM concentrations > solution pH > bone char mass > incubation duration. This approach can be used for further experiment design and improve the immobilization of HM by bone char for water remediation.

Binary fluoride and As(V) adsorption in water using pleco fish bone chars.

The present work studied individual and binary adsorption of fluorides and As(V) in water on pleco fish bone chars (BC), as well as the effect of BC mass variation on the adsorption capacity of fluoride and As(V) in water for human consumption. The results of individual adsorption indicated that the adsorption of fluoride and As(V) on BC depends on solution pH. The adsorption capacity of fluorides at an initial concentration of 30 mg L-1 increases approximately 3 times, from 5.9 to 15.3 mg g-1, when decreasing the pH of the solution from 9 to 5, however, for the case of As(V) an antagonistic effect is observed, the adsorption capacity increases 7 times when raising the pH from 5 to 9, from 18.4 to 132.1 µg g-1 at an initial As(V) concentration of 300 µg L-1. Besides, in the binary adsorption, BC showed a higher affinity to adsorb fluoride since its adsorption capacity decreased from 16.55 to 12.50 mg g-1 as the As(V) concentration increased from 0 to 800 µg L-1 in solution. In contrast, As(V) adsorption was severely affected, decreasing from 140.2 to 32.7 µg g-1 when the fluoride concentration in the solution increased from 0 to 100 mg L-1. On the other hand, in the adsorption of groundwater contaminated with fluoride and As(V), it was determined that increasing the mass of BC from 0.5 to 20 g increases the removal percentage, reaching 99.3 and 75.7% removal for fluoride and As(V), respectively, due to the fact that increasing the mass of the adsorbent leads to a larger area and a greater number of sites that allow the adsorption of these contaminants. The thermodynamic study revealed the spontaneity of fluoride and As(V) adsorption, better affinity for fluoride but higher adsorption rate of As(V) on BC. Characterization techniques such as XRD and EDS allowed identifying hydroxyapatite as the mineral phase of BC, which is responsible for the adsorption of BC. By studying the effect of solution pH on the adsorption capacities and the characterization of BC such as XRD, EDS and TGA, it was determined that the mechanisms of fluoride adsorption are by electrostatic attractions and ion exchange, and for As(V) it is by coprecipitation and ion exchange. It was concluded that BC from pleco fish could be an alternative for treating water contaminated by fluorides and As(V).

Efficient lead immobilization by bio-beads containing Pseudomonas rhodesiae and bone char.

Mineralization of lead ions (Pb2+) to pyromorphite using phosphorus-containing materials is an effective way to remediate lead (Pb) contamination. Bone char is rich in phosphorus, but its immobilization of Pb2+ is limited by poor phosphate release. To utilize the phosphorus in bone char and provide a suitable growth environment for phosphate-solubilizing bacteria, bone char and Pseudomonas rhodesiae HP-7 were encapsulated into bio-beads, and the immobilization performance and mechanism of Pb in solution and soil by bio-beads were investigated. The results showed that 137 mg/g of phosphorus was released from bone char in the presence of the HP-7 strain. Pb2+ removal efficiency reached 100 % with an initial Pb2+ concentration of 1 mM, bone char content of 6 g/L, and bio-bead dosage of 1 %. Most Pb2+ was immobilized on the surface of the bio-beads as Pb5(PO4)3Cl. The soil remediation experiments showed a 34 % reduction in the acid-soluble fraction of Pb. The bio-beads showed good stability in long-term (30 d) soil remediation. The present study shows that bone char can be turned into an efficient Pb immobilization material in the presence of phosphate-solubilizing bacteria. Thus, bio-beads are expected to be used in the remediation of Pb-contaminated environments.

Performance and mechanism of simultaneous Sb(III) and Cd(II) removal from water by Fe-Mn binary oxide/bone char.

A novel Fe-Mn binary oxide (FMBO)/bone char composite (FMBC) was synthesized and utilized to simultaneously adsorb Sb(III) and Cd(II) from aqueous phase in this study. The successful loading of Fe-Mn binary oxide on the bone char surface was revealed by the results of scanning electron microscope, X-ray diffraction patterns, and energy dispersive spectroscopy of FMBC. The FMBC exhibited remarkable ability of simultaneous removing Sb(III) and Cd(II) from aqueous, and the presence of Cd(II) enhanced Langmuir theoretical maximum adsorption capacity for Sb(III) significantly from 67.8 to 209.0 mg/g. Besides, FMBC could efficiently remove Sb(III) and Cd(II) in the wide initial pH range of 2-7. The influences of ionic strength, co-existing anions, humic acid, and temperature on the adsorption of Sb(III) and Cd(II), and the application potential of FMBC in actual groundwater were investigated. The main mechanisms of Sb(III) and Cd(II) adsorption onto FMBC involved redox, electrostatic interaction, surface complexation, ion exchange, and precipitation. The result of X-ray photoelectron spectroscopy and mapping spectrum analysis revealed that Mn(III) on FMBC played the key role in the Sb(III) oxidation, while FeOOH worked as the adsorption sites of FMBC. Meanwhile, the hydroxyapatite on FMBC also contributed to the removal of Cd(II). The presence of Cd(II) not only increased the positive charge on the surface of FMBC but also formed the Fe-Sb-Cd ternary complex, promoting the removal of Sb. This work provides valuable information for the application of FMBO/bone char as a cost-effective adsorbent to remediate co-pollution of Sb(III) and Cd(II) in aqueous environment.

Insight into iron oxychloride composite bone char for peroxymonosulfate activation: Mechanism of singlet oxygen evolution for selective degradation of organic pollutants.

The activity of iron-based catalysts in advanced oxidation processes (AOPs) is limited by the redox cycle of Fe(III) and Fe(II). In this work, iron oxychloride (FeOCl) with a unique layered structure was loaded on the bone char (BC) to enhance the activation of peroxymonosulfate (PMS). Characterization of the FeOCl-BC catalyst reveals that the loading of FeOCl changed the composition and structure of BC and BC reduced the bond gap of FeOCl. Acetaminophen (APAP) as a target pollutant could be almost completely degraded at neutral pH, and the removal rate reached 0.6597 min-1. APAP could also be selectively oxidized by FeOCl-BC/PMS system in the presence of some inorganic anions (SO42-, NO3-, and Cl-) and humic acid. Quenching experiments, electron paramagnetic resonance (EPR), chemical probes, and linear sweep voltammetry (LSV) confirm that the primary oxidation mechanism of the FeOCl-BC/PMS system was dominated by 1O2. The 1O2 was generated from the conversion of O2•- and the self-dissociation of PMS, involving the formation of metastable iron intermediates and the redox cycle of Fe(III) and Fe(II). The unique structure of FeOCl, the transport of lattice oxygen and the enrichment of electrons by carbon defects play an essential role in generating reactive species. In this work, the limitation of the redox cycle of Fe(III) and Fe(II) was broken by loading FeOCl on the surface of BC, and a new catalytic mechanism was proposed. This work provides a new perspective for the construction of efficient iron-based catalysts and the practical application of PMS-based AOPs.

Micro/nanoscale bone char alleviates cadmium toxicity and boosts rice growth via positively altering the rhizosphere and endophytic microbial community.

This present study investigated pork bone-derived biochar as a promising amendment to reduce Cd accumulation and alleviate Cd-induced oxidative stress in rice. Micro/nanoscale bone char (MNBC) pyrolyzed at 400 °C and 600 °C was synthesized and characterized before use. The application rates for MNBCs were set at 5 and 25 g·kg-1 and the Cd exposure concentration was 15 mg·kg-1. MNBCs increased rice biomass by 15.3-26.0% as compared to the Cd-alone treatment. Both types of MNBCs decreased the bioavailable Cd content by 27.4-54.8%; additionally, the acid-soluble Cd fraction decreased by 10.0-12.3% relative to the Cd alone treatment. MNBC significantly reduced the cell wall Cd content by 50.4-80.2% relative to the Cd-alone treatment. TEM images confirm the toxicity of Cd to rice cells and that MNBCs alleviated Cd-induced damage to the chloroplast ultrastructure. Importantly, the addition of MNBCs decreased the abundance of heavy metal tolerant bacteria, Acidobacteria and Chloroflexi, by 29.6-41.1% in the rhizosphere but had less impact on the endophytic microbial community. Overall, our findings demonstrate the significant potential of MNBC as both a soil amendment for heavy metal-contaminated soil remediation and for crop nutrition in sustainable agriculture.

First principal observation documenting the three-dimensional uptake of cadmium and spatial distribution of cadmium hydroxyapatite mineral in bone char.

The 3-D matrix scale ion-exchange mechanism was explored for high-capacity cadmium (Cd) removal using bone chars (BC) chunks (1-2 mm) made at 500 °C (500BC) and 700 °C (700BC) in aqueous solutions. The Cd incorporation into the carbonated hydroxyapatite (CHAp) mineral of BC was examined using a set of synchrotron-based techniques. The Cd removal from solution and incorporation into mineral lattice were higher in 500BC than 700BC, and the diffusion depth was modulated by the initial Cd concentration and charring temperature. A higher carbonate level of BC, more pre-leached Ca sites, and external phosphorus input enhanced Cd removal. The 500BC showed a higher CO32-/PO43- ratio and specific surface area (SSA) than the 700BC, providing more vacant sites by dissolution of Ca2+. In situ observations revealed the refilling of sub-micron pore space in the mineral matrix because of Cd incorporation.The X-ray nanodiffraction (XND) analyses revealed that Cd was mainly removed from water by incorporation into the mineral lattice of 500BC via ion exchange, rather than surface sorption and precipitation, and the mineral phase was transformed from hydroxyapatite (HAp) to cadmium hydroxyapatite (Cd-HAp). The Rietveld's refinement of X-ray diffraction (XRD) data resolved up to 91% of the crystal displacement of Ca2+ by Cd2+. The specific phase and stoichiometry of the new Cd-HAp mineral was dependent on the level of ion exchange. This mechanistic study confirmed that 3-D ion exchange was the most important path for heavy metal removal from aqueous solution and immobilization in BC mineral matrix, and put forward a novel and sustainable remediation strategy for Cd removal in wastewater and soil clean-up.

Bioactive impact of manuka honey and bone char incorporated into gelatin and chitosan cryogels in a rat calvarial fracture model.

Bone tissue engineered scaffolds are designed to mimic the natural environment for regeneration when typical healing is inhibited. Autografts are the current gold standard for treatment but are limited by available bone and supplementary surgical sites that broaden complications and comorbidities. Cryogels are an ideal scaffold in bone regeneration due to their mechanical integrity and marcoporous structure that elicits angiogenesis and subsequently new bone tissue formation. To aid in bioactivity and osteoinductivity, manuka honey (MH) and bone char (BC) were added to gelatin and chitosan cryogels (CG). Manuka honey has powerful antimicrobial properties to aid against graft infection, and bone char is composed of 90% hydroxyapatite, a well-studied bioactive material. These additives are natural, abundant, easy to use, and cost effective. CG cryogels incorporated with either BC or MH, and plain CG cryogels were implanted into rat calvarial fracture models for cortical bone regeneration analysis. We found indication of bioactivity with both bone char and manuka honey through the presence of woven bone structure in histology stains and micro computed tomography (microCT) data. Overall, plain CG cryogels supported greater bone regeneration capabilities than the BC or MH incorporated cryogels due to a lack of advanced organized tissue formation and collagen deposition after 8 weeks of implantation; however, future work should explore varying additive concentrations and delivery methods to further assess additive potential.