Fabrication of an Ultrastrong Formaldehyde-Free Wood Adhesive with an Organic-Inorganic Cross-Linking Network.

The wood industry faces challenges in producing eco-friendly, high-performance, and formaldehyde-free adhesives. In this study, carboxylated styrene-butadiene rubber (XSBR) was blended with polyamidoamine-epichlorohydrin (PAE) resin, and a controlled amount of CaCO3 powder was incorporated to create an adhesive with exceptional strength. The resulting three-layer plywood demonstrated remarkable dry and wet shear strengths of 3.09 and 2.36 MPa, respectively, and of 2.27 MPa after boiling water tests, comparable to that of phenolic resins. Additionally, the adhesive exhibited strong adhesion across various materials including glass, metal, etc. This exceptional performance was due to two primary factors: (1) the high-density chemical cross-linking reaction and the physical entanglement between XSBR and PAE; (2) the organic-inorganic hybrid involving metal ion complexation developed by CaCO3, which fostered molecular chain connections and enhanced the adhesive-material interface. These findings offer valuable references for further research in the field of wood adhesives.

An algorithm for very high pressure molecular dynamics simulations.

We describe a method to run simulations of ground or excited state dynamics under extremely high pressures. The method is based on the introduction of a fictitious ideal gas that exerts the required pressure on a molecular sample and is therefore called XP-GAS (eXtreme Pressure by Gas Atoms in a Sphere). The algorithm is most suitable for approximately spherical clusters of molecules described by quantum chemistry methods, Molecular Mechanics or mixed QM/MM approaches. We compare the results obtained by the algorithm here presented and by the XP-PCM approach, based on a continuum description of the environment. As a test case, we study the conformational dynamics of 1,3-butadiene either as an isolated molecule ("naked" butadiene) or embedded in a cluster of argon atoms, under pressures up to 15 GPa. Overall, our results show that the XP-GAS QM/MM simulation method is in good agreement with the XP-PCM QM/Continuum model (Cammi model) in describing the effect of the pressure on static properties as the equilibrium geometry of butadiene in the ground state. Furthermore, the comparison of XP-GAS simulations with naked butadiene and butadiene in argon shows the importance, for XP-GAS and related methods, of a realistic representation of the medium in modelling pressure effects.

MOF-Derived ZrO2-Supported Bimetallic Pd-Ni Catalyst for Selective Hydrogenation of 1,3-Butadiene.

A series of MOF-derived ZrO2-supported Pd-Ni bimetallic catalysts (PdNi/UiO-67-CTAB(n)-A500) were prepared by co-impregnation and pyrolysis at 500 °C under air atmosphere using UiO-67-CTAB(n) (CTAB: cetyltrimethylammonium bromide; n: the concentration of CTAB; n = 0, 3, 8, 13, 18) as a sacrificial template. The catalytic activity of PdNi/UiO-66-CTAB(n)-A500 in 1,3-butadiene hydrogenation was found to be dependent on the crystal morphology of the UiO-67 template. The highest activity was observed over the PdNi/UiO-67-CTAB(3)-A500 catalyst which was synthesized using UiO-67-CTAB(3) with uniform octahedral morphology as the template for the 1,3-butadiene selective hydrogenation. The 1,3-butadiene conversion and total butene selectivity were 98.4% and 44.8% at 40 °C within 1 h for the PdNi/UiO-67-CTAB(3)-A500 catalyst, respectively. The catalyst of PdNi/UiO-67-CTAB(3)-A500 can be regenerated in flowing N2 at 200 °C. Carbon deposited on the surface of the catalyst was the main reason for its deactivation. This work is valuable for the high-efficiency bimetallic catalyst's development on the selective hydrogenation of 1,3-butadiene.

Additively Manufactured Carbon-Reinforced ABS Honeycomb Composite Structures and Property Prediction by Machine Learning.

The expansive utility of polymeric 3D-printing technologies and demand for high- performance lightweight structures has prompted the emergence of various carbon-reinforced polymer composite filaments. However, detailed characterization of the processing-microstructure-property relationships of these materials is still required to realize their full potential. In this study, acrylonitrile butadiene styrene (ABS) and two carbon-reinforced ABS variants, with either carbon nanotubes (CNT) or 5 wt.% chopped carbon fiber (CF), were designed in a bio-inspired honeycomb geometry. These structures were manufactured by fused filament fabrication (FFF) and investigated across a range of layer thicknesses and hexagonal (hex) sizes. Microscopy of material cross-sections was conducted to evaluate the relationship between print parameters and porosity. Analyses determined a trend of reduced porosity with lower print-layer heights and hex sizes compared to larger print-layer heights and hex sizes. Mechanical properties were evaluated through compression testing, with ABS specimens achieving higher compressive yield strength, while CNT-ABS achieved higher ultimate compressive strength due to the reduction in porosity and subsequent strengthening. A trend of decreasing strength with increasing hex size across all materials was supported by the negative correlation between porosity and increasing print-layer height and hex size. We elucidated the potential of honeycomb ABS, CNT-ABS, and ABS-5wt.% CF polymer composites for novel 3D-printed structures. These studies were supported by the development of a predictive classification and regression supervised machine learning model with 0.92 accuracy and a 0.96 coefficient of determination to help inform and guide design for targeted performance.

Industry-wide review of potential worker exposure to 1,3-butadiene during chemical manufacturing and processing as a reactant.

Among the first 20 high-priority chemical substances selected by USEPA to undergo risk evaluation as part of the Toxic Substances Control Act, as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act of 2016 is 1,3-butadiene (1,3-BD). Because much of the literature related to occupational exposure to 1,3-BD is associated with the use of the substance in synthetic rubber production and few data have been published for exposures to 1,3-BD manufacturing workers, existing industrial hygiene data collected at facilities where the substance is manufactured or processed as a reactant were compiled and analyzed. The dataset was comprised of personal air samples collected between 2010 and 2019 at facilities located throughout the United States and was compiled into a single database using a uniform data collection template. Data designated by the companies as full-shift were stratified by job group and one of three operational conditions of the workplace: routine, turnaround, and non-routine. Data designated by the companies as short-term and task-level were stratified by task description, sample duration, and operational condition. The final aggregated database contained a total of 5,676 full-shift personal samples. Mean concentrations of 1,3-BD for the job groups ranged from 0.012 ppm to 0.16 ppm. High-end estimates of 1,3-BD air concentrations for the job groups under routine operations ranged from 0.014 ppm to 0.23 ppm. The aggregated database also included 1,063 short-term and task-level personal samples. For short-term samples (< =15 min), mean concentrations ranged from 0.49 ppm to 3.9 ppm, with the highest concentrations observed for the cleaning and maintaining equipment tasks. For task samples with durations greater than 15 min, mean concentrations ranged from 0.49 to 3.6 ppm, with the highest concentrations observed for the unloading and loading task. In addition to the personal air sampling records, information on the use of PPE during various tasks was compiled and analyzed. This data set provides robust quantitative air concentration data and exposure control information for which occupational exposures to 1,3-BD in the Manufacturing and Processing as a Reactant condition of use can be assessed.

Catalytic Asymmetric Cascade Dearomatization of Indoles via a Photoinduced Pd-Catalyzed 1,2-Bisfunctionalization of Butadienes.

Photoinduced Pd-catalyzed bisfunctionalization of butadienes with a readily available organic halide and a nucleophile represents an emerging and attractive method to assemble versatile alkenes bearing various functional groups at the allylic position. However, enantiocontrol and/or diastereocontrol in the C-C or C-X bond-formation step have not been solved due to the open-shell process. Herein, we present a cascade asymmetric dearomatization reaction of indoles via photoexcited Pd-catalyzed 1,2-biscarbonfunctionalization of 1,3-butadienes, wherein asymmetric control on both the nucleophile and electrophile part is achieved for the first time in photoinduced bisfunctionalization of butadienes. This method delivers structurally novel chiral spiroindolenines bearing two contiguous stereogenic centers with high diastereomeric ratios (up to >20 : 1 dr) and good to excellent enantiomeric ratios (up to 97 : 3 er). Experimental and computational studies of the mechanism have confirmed a radical pathway involving excited-state palladium catalysis. The alignment and non-covalent interactions between the substrate and the catalyst were found to be essential for stereocontrol.

Butadiene Sulfone Based Binary Deep Eutectic Electrolyte for High Performance Lithium Metal Batteries.

Deep eutectic electrolytes (DEEs) have attracted significant interest due to the unique physiochemical properties, yet challenges persist in achieving satisfactory Li anode compatibility through a binary DEE formula. In this study, we introduce a nonflammable binary DEE electrolyte comprising of lithium bis(trifluoro-methane-sulfonyl)imide (LiTFSI) and solid butadiene sulfone (BdS), which demonstrates enhanced Li metal compatibility while exhibiting high Li+ ion migration number (0.52), ionic conductivity (1.48 mS ⋅ cm-1), wide electrochemical window (~4.5 V vs. Li/Li+) at room temperature. Experimental and theoretical results indicate that the Li compatibility derives from the formation of a LiF-rich SEI, attributed to the undesirable adsorption and deformation of BdS on Li surface that facilitates the preferential reactions between LiTFSI and Li metal. This stable SEI effectively suppresses dendrites growth and gas evolution reactions, ensuring a long lifespan and high coulombic efficiency in both the Li||Li symmetric cells, Li||LiCoO2 and Li||LiNi0.8Co0.1Mn0.1O2 full cells. Moreover, the BdS eutectic strategy exhibit universal applicability to other metal such as Na and Zn by pairing with the corresponding TFSI-based salts.

Closing the Shell: Gas-Phase Solvation of Halides by 1,3-Butadiene.

Gas-phase solvation of halides by 1,3-butadiene has been studied via a combination of photoelectron spectroscopy and density functional theory. Photoelectron spectra for X- ⋯(C4 H6 )n (X=Cl, Br, I where n=1-3, 1-3 and 1-7 respectively) are presented. For all complexes, the calculated structures indicate that butadiene is bound in a bidentate fashion through hydrogen-bonding, with the chloride complex showing the greatest degree of stabilisation of the internal C-C rotation of cis-butadiene. In both Cl- and Br- complexes, the first solvation shell is shown to be at least n = 4 ${n = 4}$ from the vertical detachment energies (VDEs), however for I- , increases in the VDE may suggest a metastable, partially filled, first solvation shell for n = 4 ${n = 4}$ and a complete shell at n = 6 ${n = 6}$ . These results have implications for gas-phase clustering in atmospheric and extraterrestrial environments.

Biohydrogenation of 1,3-Butadiene to 1-Butene under Acetogenic Conditions by Acetobacterium wieringae.

The environmental fate and transformation mechanism(s) of 1,3-butadiene (BD) under anoxic conditions remain largely unexplored. Anaerobic consortia that can biohydrogenate BD to stoichiometric amounts of 1-butene at a maximum rate of 205.7 ± 38.6 µM day-1 were derived from freshwater river sediment. The formation of 1-butene occurred only in the presence of both H2 and CO2 with concomitant acetate production, suggesting the dependence of BD biohydrogenation on acetogenesis. The 16S rRNA gene-targeted amplicon sequencing revealed the enrichment and dominance of a novel Acetobacterium wieringae population, designated as strain N, in the BD-biohydrogenating community. Multiple genes encoding putative ene-reductases, candidate catalysts for the hydrogenation of the C═C bond in diene compounds, were annotated on the metagenome-assembled genome of strain N, and thus attributed the BD biohydrogenation activity to strain N. Our findings emphasize an essential but overlooked role of certain Acetobacterium members (e.g., strain N) contributing to the natural attenuation of BD in contaminated subsurface environments (e.g., sediment and groundwater). Future efforts to identify and characterize the ene-reductase(s) responsible for BD biohydrogenation in strain N hold promise for the development of industrial biocatalysts capable of stereoselective conversion of BD to 1-butene.

Investigating the Properties of Double Triangle Terthiophene Configured Dumbbell-Like Photochromic Dye with Ethyne and 1,3-Butadiene Bridge.

Dumbbell-like photochromic dyes were constructed by incorporation of double triangle terthiophene with ethyne or 1,3-butadiene bridge. Regular photochromic behavior was investigated with alternated UV (365 nm) and Visible light (˃ 400 nm) irradiation. However, the different bridge group leads to distinct difference in their photochromic wavelength. For the ethyne bridged triangle terthiophene (DT1), the photochromic wavelength was observed around 500-700 nm (peak value: 605 nm) and the solution turned to red with 365 nm light irradiation. However, the photochromic wavelength was blue shift to 418-550 nm and the solution was turned to light yellow for 1,3-butadiene bridged dye (DT2). Both of the colored solution can be bleached via visible light irradiation. Additionally, the two dyes in THF were emissive with absolute quantum yield (QY) of 0.36/0.40. Along with the photo-induced photocyclization process, the emissive solution can be effectively quenched at photo-stationary sate (Φ = 0.05/0.04). And emission "on-off" cycle could be established based on the UV/visible light irradiation cycle.