Tolterodine Tartrate Loaded Cationic Elastic Liposomes for Transdermal Delivery: In Vitro, Ex Vivo, and In Vivo Evaluations.

OBJECTIVE: Tolterodine tartrate (TOTA) is a first-line therapy to treat overactive urinary bladder (OAB). Oral delivery causes high hepatic clearance, xerostomia, headache, constipation, and blurred vision. We addressed Hansen solubility parameter (HSP) and Design Expert oriented optimized cationic elastic liposomes for transdermal application. METHODS: The experimental solubility was conducted in HSPiP predicted excipients to tailor formulations using surfactants, stearylamine, ethanol, and phosphatidylcholine (PC). These were evaluated for formulation characteristics. The optimized OTEL1 and OTEL1-G (gel) were compared against the drug solution (DS) and liposomes. In vitro and ex vivo studies were accomplished to investigate the insights into the mechanistic understanding of TOTA release and permeation ability. Finally, confocal laser scanning microscopy (CLSM) supported ex vivo results. RESULTS: HSP values of TOTA were closely related to tween-80, stearylamine, and human's skin. The size (153 nm), %EE (87.6%), and PDI (0.25) values of OTEL1 were in good agreement to the predicted values (161 nm, 80.4%, and 0.31) with high desirability (0.963). Spherical and smooth OTEL1 (including OTEL1-G and liposomes) vesicles followed non-Fickian drug release as compared to DS (Fickian) as evidence with n > 0.5 (Korsmeyer and Peppas coefficient). OTEL1 (containing lipid and surfactant as 90 mg and 13.8 mg, respectively) exhibited 2.6 and 1.8-folds higher permeation flux than DS and liposomes, respectively. Biocompatible cationic OTEL1 was safe and non-hemolytic. CONCLUSIONS: OTEL1 was promised as a lead vesicular approach and an alternative to conventional oral therapy to treat OAB in children and advanced age patients.

2D vs. 3D Evaluation of Osteocyte Lacunae - Methodological Approaches, Recommended Parameters, and Challenges: A Narrative Review by the European Calcified Tissue Society (ECTS).

PURPOSE OF REVIEW: Quantification of the morphology of osteocyte lacunae has become a powerful tool to investigate bone metabolism, pathologies and aging. This review will provide a brief overview of 2D and 3D imaging methods for the determination of lacunar shape, orientation, density, and volume. Deviations between 2D-based and 3D-based lacunar volume estimations are often not sufficiently addressed and may give rise to contradictory findings. Thus, the systematic error arising from 2D-based estimations of lacunar volume will be discussed, and an alternative calculation proposed. Further, standardized morphological parameters and best practices for sampling and segmentation are suggested. RECENT FINDINGS: We quantified the errors in reported estimation methods of lacunar volume based on 2D cross-sections, which increase with variations in lacunar orientation and histological cutting plane. The estimations of lacunar volume based on common practice in 2D imaging methods resulted in an underestimation of lacunar volume of up to 85% compared to actual lacunar volume in an artificial dataset. For a representative estimation of lacunar size and morphology based on 2D images, at least 400 lacunae should be assessed per sample.

Osteoinductive and regenerative potential of premixed calcium-silicate bioceramic sealers on vascular wall mesenchymal stem cells.

AIM: The osteogenic potential of new premixed calcium-silicate-containing bioceramic sealers (Ca-Si sealers) was tested with porcine vascular wall-mesenchymal stem cells (pVW-MSCs). METHODOLOGY: Two Ca-Si-containing sealers: Ceraseal (MetaBiomed, Cheong-si, South Korea) and AH Plus Bioceramic (Maruchi, Wonju-si, South Korea), and an epoxy resin sealer (AH Plus; Dentsply, Konstanz, Germany) as a control, were prepared according to the manufacturers' indications. All samples were allowed to set for 100% of their setting time in a sterile humid cabinet at 37°C and 95% relative humidity. pVW-MSC seeding efficiency and osteogenic differentiation were analysed as marker of gene/protein expression for up to 12 days. Mineralization assay and immunofluorescence staining were performed and evaluated over a period of 21 days. Statistical analyses were conducted using one-way analysis of variance (p < .05). Additional samples were prepared and stored under the same conditions and inspected using an environmental scanning electron microscope equipped with an energy dispersive X-ray spectroscopy system. RESULTS: Significantly higher cell seeding efficiency (p < .05) was observed for both Ca-Si sealers from day 8. pVW-MSCs showed a significant shift towards the osteogenic lineage only when seeded in contact with Ca-Si sealers. Gene expression of osteopontin was upregulated significantly. Collagen I and osteocalcin were clearly expressed by cells in contact with Ca-Si sealers. Mineralization granules were observed in Alizarin red assays and confocal laser scanning microscopy analysis of both Ca-Si sealers. No gene expression or granule mineralization were observed on the epoxy resin sealer. CONCLUSIONS: Premixed Ca-Si sealers displayed a higher potential for osteogenic activity on pVW-MSCs. Epoxy resin sealer was unable to induce any osteogenic activity. The properties of both Ca-Si sealers suggest their potential as osteoinductive platforms for vascular MSCs in periapical bone.

Spinning Disk Confocal Microscopy for Optimized and Quantified Live Imaging of 3D Mitochondrial Network.

Mitochondria are the energy factories of a cell, and depending on the metabolic requirements, the mitochondrial morphology, quantity, and membrane potential in a cell change. These changes are frequently assessed using commercially available probes. In this study, we tested the suitability of three commercially available probes-namely 5',6,6'-tetrachloro-1,1',3,3'-tetraethylbenzimidazolo-carbocyanine iodide (JC-1), MitoTracker Red CMX Rox (CMXRos), and tetramethylrhodamine methyl ester (TMRM)-for assessing the mitochondrial quantity, morphology, and membrane potential in living human mesoangioblasts in 3D with confocal laser scanning microscope (CLSM) and scanning disk confocal microscope (SDCM). Using CLSM, JC-1, and CMXRos-but not TMRM-uncovered considerable background and variation. Using SDCM, the background signal only remained apparent for the JC-1 monomer. Repetitive imaging of CMXRos and JC-1-but not TMRM-demonstrated a 1.5-2-fold variation in signal intensity between cells using CLSM. The use of SDCM drastically reduced this variation. The slope of the relative signal intensity upon repetitive imaging using CLSM was lowest for TMRM (-0.03) and highest for CMXRos (0.16). Upon repetitive imaging using SDCM, the slope varied from 0 (CMXRos) to a maximum of -0.27 (JC-1 C1). Conclusively, our data show that TMRM staining outperformed JC-1 and CMXRos dyes in a (repetitive) 3D analysis of the entire mitochondrial quantity, morphology, and membrane potential in living cells.

Production and characterization of anti-hypertensive and anti-diabetic peptides from fermented sheep milk with anti-inflammatory activity: in vitro and molecular docking studies.

BACKGROUND: The present study aimed to evaluate the anti-hypertensive and anti-diabetic activities from biologically active peptides produced by fermented sheep milk with Lacticaseibacillus paracasei M11 (MG027695), as well as to purify and characterize the angiotensin-converting enzyme (ACE) inhibitory and anti-diabetic peptides produced from fermented sheep milk. RESULTS: After 48 h of fermentation at 37 °C, sheep milk demonstrated significant changes in anti-diabetic effects and ACE-I effects, with inhibition percentages observed for ACE inhibition (76.32%), α-amylase (70.13%), α-glucosidase (70.11%) and lipase inhibition (68.22%). The highest level of peptides (9.77 mg mL-1) was produced by optimizing the growth conditions, which included an inoculation rate of 2.5% and a 48 h of incubation period. The comparison of molecular weight distributions among protein fractions was conducted through sodium dodecyl-sulfate polyacrylamide gel electrophoresis analysis, whereas spots were separated using 2D gel electrophoresis according to both the molecular weight and pH. Peptide characterization with ultra-filtration membranes at 3 and 10 kDa allowed the study to assess molecular weight-based separation. Nitric oxide generated by lipopolysaccharide and the secretion of pro-inflammatory cytokines in RAW 264.7 immune cells were both inhibited by sheep milk fermented with M11. Fourier-transform infrared spectroscopy was employed to assess changes in functional groups after fermentation, providing insights into the structural changes occurring during fermentation. CONCLUSION: The present study demonstrates that fermentation with L. paracasei (M11) led to significant changes in fermented sheep milk, enhancing its bioactive properties, notably in terms of ACE inhibition and anti-diabetic activities, and the generation of peptides with bioactive properties has potential health benefits. © 2024 Society of Chemical Industry.

Line-field confocal optical coherence tomography, a novel non-invasive tool for the diagnosis of onychomycosis.

BACKGROUND AND OBJECTIVES: Onychomycosis is common and important to distinguish from other nail diseases. Rapid and accurate diagnosis is necessary for optimal patient treatment and outcome. Non-invasive diagnostic tools have increasing potential for nail diseases including onychomycosis. This study evaluated line-field confocal optical coherence tomography (LC-OCT) as a rapid non-invasive tool for diagnosing onychomycosis as compared to confocal laser scanning microscopy (CLSM), optical coherence tomography (OCT), and conventional methods. PATIENTS AND METHODS: In this prospective study 86 patients with clinically suspected onychomycosis and 14 controls were examined using LC-OCT, OCT, and CLSM. KOH-preparation, fungal culture, PCR, and histopathology were used as comparative conventional methods. RESULTS: LC-OCT had the highest sensitivity and negative predictive value of all methods used, closely followed by PCR and OCT. Specificity and positive predictive value of LC-OCT were as high as with CLSM, while OCT scored much lower. The gold standard technique, fungal culture, showed the lowest sensitivity and negative predictive value. Only PCR and culture allowed species differentiation. CONCLUSIONS: LC-OCT enables quick and non-invasive detection of onychomycosis, with advantages over CLSM and OCT, and similar diagnostic accuracy to PCR but lacking species differentiation. For accurate nail examination, LC-OCT requires well-trained and experienced operators.

HSPiP, Computational, and Thermodynamic Model-Based Optimized Solvents for Subcutaneous Delivery of Tolterodine Tartrate and GastroPlus­Based In Vivo Prediction in Humans: Part II.

In part I, we reported Hansen solubility parameters (HSP, HSPiP program), experimental solubility at varied temperatures for TOTA delivery. Here, we studied dose volume selection, stability, pH, osmolality, dispersion, clarity, and viscosity of the explored combinations (I-VI). Ex vivo permeation and deposition studies were performed to observe relative diffusion rate from the injected site in rat skin. Confocal laser scanning microscopy (CLSM) study was conducted to support ex vivo findings. Moreover, GastroPlus predicted in vivo parameters in humans and the impact of various critical factors on pharmacokinetic parameters (PK). Immediate release product (IR) contained 60% of PEG400 whereas controlled release formulation (CR) contained PEG400 (60%), water (10%) and d-limonene (30%) to deliver 2 mg of TOTA. GastroPlus predicted the plasma drug concentration of weakly basic TOTA as function of pH (from pH 2.0 to 9). The cumulative drug permeation and drug deposition were found to be in the order as B-VI˃ C-VI˃A-VI across rat skin. This finding was further supported with CLSM. Moreover, IR and CR were predicted to achieve Cmax of 0.0038 µg/ mL and 0.00023 µg/mL, respectively, after sub-Q delivery. Added limonene in CR extended the plasma drug concentration over period of 12 h as predicted in GastroPlus. Parameters sensitivity analysis (PSA) assessment predicted that sub-Q blood flow rate is the only factor affecting PK parameters in IR formulation whereas this was insignificant for CR. Thus, sub-Q delivery CR would be promising alternative with ease of delivery to children and aged patient.

Optimized Ribociclib nanostructured lipid carrier for the amelioration of skin cancer: Inferences from ex-vivo skin permeation and dermatokinetic studies.

Current research focuses on explicitly developing and evaluating nanostructured lipidic carriers (NLCs) for the chemotherapeutic drug Ribociclib (RCB) via the topical route to surmount the inherent bioavailability shortcomings. The absolute oral bioavailability has not been determined, but using a physiologically based pharmacokinetic model it was predicted that 65.8 % of the standard dose of RCB (600 mg) would be absorbed mainly in the small intestine. RCB-NLCs were produced using the solvent evaporation method, and Box-Behnken Design (BBD) was employed to optimize composition. The prepared NLCs had an average PS of 79.29 ± 3.53 nm, PDI of 0.242 ± 0.021, and a %EE of 86.07 ± 3.14. The TEM analysis disclosed the spherical form and non-aggregative nature of the NLCs. The outcomes of an in-vitro release investigation presented cumulative drug release of 84.97 ± 3.37 % in 24 h, significantly higher than that from the RCB suspension (RCB-SUS). Ex-vivo skin permeation investigations on rodent (Swiss albino mice) revealed that RCB-NLCs have 1.91 times increases in skin permeability comparable to RCB-SUS. Compared to RCB-SUS, RCB-NLCs were able to penetrate deeper into the epidermis membrane than RCB-SUS as per the findings of confocal microscopy. In dermatokinetic study, higher amount of RCB was maintained in both the layers of mice's skin when treated with RCB-NLCs gel comparable to the RCB-SUS gel preparation. The in-vitro, ex-vivo, CLSM, and dermatokinetics data demonstrated a significant possibility for this novel RCB formulation to be effective against skin cancer.

First 3-D reconstruction of copulation in Lepidoptera: interaction of genitalia in Tortrix viridana (Tortricidae).

BACKGROUND: The process of copulation in Lepidoptera is understudied and poorly understood from a functional perspective. The purpose of the present paper is to study the interaction of the male and female genitalia of Tortrix viridana Linnaeus, 1758 via three-dimensional models of pairs fixed during copulation. Other techniques (confocal laser scanning microscopy, scanning electron microscopy and histology) were used to clarify the role of the organs involved in the process. RESULTS: Three-dimensional models based on micro-CT scanned copulating pairs were generated allowing visualisation of the position of the male and female counterparts, spatial changes during copulation, and the skeleto-muscular apparatus involved in the process. The male genitalia and their musculature are simplified in comparison with other lineages of the family, but the opposite is true for the female genitalia. The attachment of the couple is achieved only through flexion of the valvae, clasping the large and sclerotised sternite 7 of the female. The anal cone and socii of the male are in contact with certain parts of the anal papillae and the sterigma of the female. The long tubular vesica is inserted into the narrow posterior part of the ductus bursae. Its eversion is achieved by an increase in haemolymph pressure. A possible mechanism of stimulation of the female via pulsations of the diverticulum of the vesica was discovered. A compressed sclerotised area of the ductus bursae putatively serves as a valve controlling the transfer of ejaculated materials. Copulation progresses through two phases: in the first the vesica and its diverticulum are inflated by haemolymph, and in the second the diverticulum is not inflated, and the vesica is occupied by viscous ejaculated material. The formation of the multilayered spermatophore was observed, and we discovered that sperm is transferred very late in the copulation process. CONCLUSIONS: Copulation process in Lepidoptera is studied for the first time with three-dimensional reconstructions of couples of Tortrix viridana, used as a model species. The internal genitalia is the scenario of multiple interactions between male and female, but the external remain static. A possible mechanism of stimulation of the female internal copulation organs is proposed.

Staphylococcus epidermidis biofilm assembly and self-dispersion: bacteria and matrix dynamics.

Staphylococcus epidermidis, despite being a commensal of human skin and mucosa, is a major nosocomial pathogen implicated in device-associated infections. The dissemination of infection to other body sites is related to biofilm dispersal. This study focused on the dispersion stage of S. epidermidis CIP 444 biofilm, with the assessment of biofilm matrix composition in a time-dependent experiment (7 days extended) with 3 independent repetitions, using confocal laser scanning microcopy (CLSM) in association with ZEN 3.4 blue edition, COMSTAT, and ImageJ software. SYTO-9, propidium iodide (PI), DID'OIL, FITC, and calcofluor white M2R (CFW) were used to stain biofilm components. The results indicated that the biomass of dead cells increased from 15.18 ± 1.81 µm3/µm2 (day 3) to 23.15 ± 6.075 µm3/µm2 (day 4), along with a decrease in alive cells' biomass from 22.75 ± 2.968 µm3/µm2 (day 3) to 18.95 ± 5.713 µm3/µm2 (day 4). When the intensities were measured after marking the biofilm components, in a 24-h-old biofilm, polysaccharide made up the majority of the investigated components (52%), followed by protein (18.9%). Lipids make up just 11.6% of the mature biofilm. Protein makes up the largest portion (48%) of a 4-day-old biofilm, followed by polysaccharides (37.8%) and lipids (7.27%). According to our findings, S. epidermidis CIP 444 dispersion occurred on day 4 of incubation, and new establishment of the biofilm occurred on day 7. Remarkable changes in biofilm composition will pave the way for a new approach to understanding bacterial strategies inside biofilms and finding solutions to their impacts in the medical field.

A promising microbial α-amylase production, and purification from Bacillus cereus and its assessment as antibiofilm agent against Pseudomonas aeruginosa pathogen.

BACKGROUND AND AIM: The purpose of the current study is to isolate a heavily amylase-producing bacteria of the genus Bacillus from soil samples, optimize the production of the enzyme, purify it, and evaluate its activity against biofilm-producing bacteria. A total of 12 soil samples were collected and screened for promising Bacillus species with good amylolytic activity. Isolation was done by serial dilution and plating technique and amylolytic activity was determined by starch agar plate method. Among the 12 Bacillus isolates recovered from soil samples, 7 showed positive α-amylase production. The best isolate that recorded the greatest amylolytic activity was selected for further studies. This isolate was identified by 16S rRNA sequencing as Bacillus cereus and registered under gene bank accession number OP811897. Furthermore, the α-amylase enzyme was produced by a submerged fermentation technique using best production media and partially purified by ammonium sulfate and chilled ethanol and molecular weight had been determined by SDS-PAGE gel electrophoresis. The production of α-amylase was optimized experimentally by one-factor at a time protocol and statistically by Plackett-Burman design as well as RSM CCD design. Data obtained from OFAT and CCD revealed that α-amylase activities were 1.5- and twofold respectively higher as compared to un-optimized conditions. The most significant factors had been identified and optimized by CCD design. RESULTS: Among the eleven independent variables tested by PBD, glucose, peptone, (NH4)2SO4, and Mg SO4 were the most significant parameters for α-amylase production with an actual yield of 250U/ml. The best physical parameters affecting the enzyme production were incubation time at 35 °C, and pH 5.5 for 48 h. The partially purified enzyme with 60% ammonium sulphate saturation with 1.38- fold purification showed good stability characteristics at a storage temperature of 4 °C and pH up to 8.5 for 21 days. Antibiofilm activity of purified α-amylase was determined against Pseudomonas aeruginosa (ATCC 35659) by spectrophotometric analysis and CLSM microscopic analysis. Results demonstrated biofilm inhibition by 84% of the formed Pseudomonas biofilm using a microtiter plate assay and thickness inhibition activity by 83% with live/Dead cells percentage of 17%/83% using CLSM protocol. CONCLUSIONS: A highly stable purified α-amylase from B. cereus showed promising antibiofilm activity against one of the clinically important biofilm-forming MDR organisms that could be used as a cost-effective tool in pharmaceutical industries.

An examination of nervous system revealed unexpected immunoreactivity of both secretory apparatus and excretory canals in plerocercoids of two broad tapeworms (Cestoda: Diphyllobothriidea).

Dibothriocephalus ditremus and Dibothriocephalus latus are diphyllobothriidean tapeworms autochthonous to Europe. Their larval stages (plerocercoids) may seriously alter health of their intermediate fish hosts (D. ditremus) or cause intestinal diphyllobothriosis of the final human host (D. latus). Despite numerous data on the internal structure of broad tapeworms, many aspects of the morphology and physiology related to host­parasite co-existence remain unclear for these 2 species. The main objective of this work was to elucidate functional morphology of the frontal part (scolex) of plerocercoids, which is crucial for their establishment in fish tissues and for an early attachment in final hosts. The whole-mount specimens were labelled with different antibodies and examined by confocal microscope to capture their complex 3-dimensional microanatomy. Both species exhibited similar general pattern of immunofluorescent signal, although some differences were observed. In the nervous system, FMRF amide-like immunoreactivity (IR) occurred in the bi-lobed brain, 2 main nerve cords and surrounding nerve plexuses. Differences between the species were found in the structure of the brain commissures and the size of the sensilla. Synapsin IR examined in D. ditremus occurred mainly around FMRF amide-like IR brain lobes and main cords. The unexpected finding was an occurrence of FMRF amide-like IR in terminal reservoirs of secretory gland ducts and excretory canals, which has not been observed previously in any tapeworm species. This may indicate that secretory/excretory products, which play a key role in host­parasite relationships, are likely to contain FMRF amide-related peptide/s.

Stages of NETosis Development upon Stimulation of Neutrophils with Activators of Different Types.

Before NETs are released, the neutrophil undergoes structural changes. First, it flattens, accompanied by a change in cell shape and rearrangement of the cytoskeleton. Then, nuclear swelling begins, which ends with the ejection of NETs into the extracellular space. We used widefield and confocal fluorescence microscopy to register morphological and structural changes in neutrophils during activation and NETosis. Different types of activators were used, such as NOX-dependent PMA and calcium ionophore A23187. The measurements were performed in a series of sequential stages. In the first stage (30 s after addition of activators and immediately after stimulation of neutrophils), the response of neutrophils to A23187 and PMA exposure was studied. Subsequently, the characteristics of neutrophils in different phases of activation were examined over a longer period of time (30, 60, 120, 180, and 240 min). The specific features of NETosis development were analyzed separately. During the first 30 s, neutrophils appeared to be heterogeneous in shape and structure of the actin cytoskeleton. Characteristic cell shapes included 30″ type 1 cells, similar in shape to the control, with F-actin concentrated in the center of the cytoplasm, and 30″ type 2 cells, which had flattened (spread) shapes with increased frontal dimensions and F-actin distributed throughout the cell. Later, the development of nuclear swelling, the corresponding changes in neutrophil membranes, and NET release into the extracellular space were evaluated. The conditions determining the initiation of chromatin ejection and two characteristic types of decondensed chromatin ejection were revealed. The results obtained contribute to a better understanding of the biophysical mechanisms of neutrophil activation and NETosis development.

Antimicrobial, Antibiofilm, and Anticancer Activities of Syzygium aromaticum Essential Oil Nanoemulsion.

In the current study, clove oil nanoemulsion (CL-nanoemulsion) and emulsion (CL-emulsion) were prepared through an ecofriendly method. The prepared CL-nanoemulsion and CL-emulsion were characterized using dynamic light scattering (DLS) and a transmission electron microscope (TEM), where results illustrated that CL-nanoemulsion droplets were approximately 32.67 nm in size and spherical in shape, while CL-nanoemulsion droplets were approximately 225.8 nm with a spherical shape. The antibacterial activity of CL-nanoemulsion and CL-emulsion was carried out using a microbroth dilution method. Results revealed that the preferred CL-nanoemulsion had minimal MIC values between 0.31 and 5 mg/mL. The antibiofilm efficacy of CL-nanoemulsion against S. aureus significantly decreased the development of biofilm compared with CL-emulsion. Furthermore, results illustrated that CL-nanoemulsion showed antifungal activity significantly higher than CL-emulsion. Moreover, the prepared CL-nanoemulsion exhibited outstanding antifungal efficiency toward Candida albicans, Cryptococcus neoformans, Aspergillus brasiliensis, A. flavus, and A. fumigatus where MICs were 12.5, 3.12, 0.78, 1.56, and 1.56 mg/mL, respectively. Additionally, the prepared CL-nanoemulsion was analyzed for its antineoplastic effects through a modified MTT assay for evaluating apoptotic and cytotoxic effects using HepG2 and MCF-7 cell lines. MCF-7 breast cancer cells showed the lowest IC50 values (3.4-fold) in CL-nanoemulsion relative to that of CL-emulsion. Thus, CL-nanoemulsion induces apoptosis in breast cancer cells by inducing caspase-8 and -9 activity and suppressing VEGFR-2. In conclusion, the prepared CL-nanoemulsion had antibacterial, antifungal, and antibiofilm as well as anticancer properties, which can be used in different biomedical applications after extensive studies in vivo.

Structural Studies of Mexican Husk Tomato (Physalis ixocarpa) Fruit Cutin.

Green tomato (Physalis ixocarpa) is a specie native to Mexico, and it is known as "tomatillo" or "husk tomato". The fruit contains vitamins, minerals, phenolic compounds, and steroidal lactones, presenting antimicrobial activity and antinarcotic effects. Therefore, it is not only used in traditional Mexican cuisine, but also in traditional medicine to relieve some discomforts such as fever, cough, and amygdalitis. However, it is a perishable fruit whose shelf life is very short. As a part of the peel, cuticle, and epicuticular waxes represent the most important part in plant protection, and the specific composition and structural characterization are significant to know how this protective biopolymer keeps quality characteristics in fresh fruits. P. ixocarpa cutin was obtained by enzymatic treatments (cellulase, hemicellulose, and pectinase) and different concentrations of TFA, and studied through Cross Polarization Magic Angle Spinning Nuclear Magnetic Resonance (CPMAS 13C NMR), Ultra-High Performance Liquid Chromatography coupled to Mass Spectrometry (UHPLC-MS), and was morphologically characterized by Confocal Laser Scanning Microscopy (CLSM) and Scanning Electron Microscopy (SEM). The main constituents identified under the basis of UHPLC-MS analysis were 9,10,18-trihydroxy-octadecanoic acid and 9,10-epoxy-18-hydroxy-octadecanoic acid with 44.7 and 37.5%, respectively. The C16 absence and low occurrence of phenolic compounds, besides the presence of glandular trichomes, which do not allow a continuous layer on the surface of the fruit, could be related to a lower shelf life compared with other common fruits such as tomato (Solanum lycopersicum).

Antimicrobial Efficacy of Different Irrigant Solutions Using a Novel Biofilm Model: An In Vitro Confocal Laser Scanning Microscopy Experiment.

AIM: To determine the ability of different irrigation solutions to biomechanically remove Enterococcus faecalis biofilm from a novel artificial root canal model during chemomechanical preparation. METHODS: High resolution micro-computer-tomography scans of a mandibular molar's mesial root were used to produce 50 identical 3D-printed resin root canal models. These were cultured with E.faecalis over seven days to generate biofilm and subjected to chemomechanical preparation using: saline; 17% ethylenediaminetetraacetic acid (EDTA) or 2% sodium hypochlorite (NaOCl) alongside positive/negative controls (n = 10). Canals were prepared to 40/.06 taper, with 1 mL irrigation between instruments, followed by 5 mL penultimate rinse, 30 s ultrasonic activation and 5 mL final rinse. Residual biofilm volume (pixels) was determined following immunofluorescent staining and confocal-laser-scanning-microscopy imaging. Statistical comparisons were made using Kruskal-Wallis with post-hoc Dunn's tests (α ⟨0.05). RESULTS: In all canal thirds, the greatest biofilm removal was observed with NaOCl, followed by EDTA and saline. The latter had significantly higher E.faecalis counts than NaOCl and EDTA (P ⟨0.01). However, no statistical differences were found between EDTA and NaOCl or saline and positive controls (P ⟩0.05). CONCLUSIONS: Within limitations of this model, 17% EDTA was found to be as effective as 2% NaOCl at eradicating E.faecalis biofilm following chemomechanical preparation. Further investigations with multi-species biofilms are encouraged.

In-vitro and ex-vivo antidiabetic, and antioxidant activities of Box-Behnken design optimized Solanum xanthocarpum extract loaded niosomes.

One of the most prevalent lifestyle diseases, diabetes mellitus (DM) is brought on by an endocrine issue. DM is frequently accompanied by hyperglycemia, a disease that typically results in an excess of free radicals that stress tissues. The medical community is currently concentrating on creating therapeutic medications with roots in nature to lessen the damage associated with hyperglycemia. Solanum xanthocarpum has a number of medicinal benefits. The investigation aimed to produce and analyze niosomal formulations containing S. xanthocarpum extract (SXE). Niosomes were made by implementing the solvent evaporation process, which was further optimized using Box-Behnken design. Drug release, DPPH assessments, α-amylase inhibition assay, α-glucosidase inhibition assay, and confocal laser scanning microscopy (CLSM) investigation were all performed on the developed formulation (SXE-Ns-Opt). SXE-Ns-Opt displayed a 253.6 nm vesicle size, a PDI of 0.108, 62.4% entrapment efficiency, and 84.01% drug release in 24 h. The rat's intestinal CLSM image indicated that the rhodamine red B-loaded SXE-Ns-Opts had more intestinal penetration than the control. Additionally, the antioxidant effect of the obtained formulation was demonstrated as 89.46% as compared to SXE (78.10%). Additionally, acarbose, SXE, and SXE-Ns-Opt each inhibited the activity of α-amylase by 95.11%, 85.88%, and 89.87%, and also suppressed the enzyme of α-glucosidase by 88.47%, 81.07%, and 85.78%, respectively. To summarise, the establishment of the SXE-Ns-Opt formulation and its characterization demonstrated the legitimacy of the foundation. A promising candidate for the treatment of diabetes mellitus has been shown as in vitro studies, antioxidant against oxidative stress, CLSM of rat's intestine and a high degree of penetration of formulation.

Dual-Species Biofilms Formed by Escherichia coli and Salmonella Enhance Chlorine Tolerance.

In this research, mono- and dual-species biofilms of Escherichia coli (O45:H2 and O121:H19) and Salmonella enterica serovar Typhimurium formed on stainless-steel coupons were treated with 100 mg/L NaClO for 1 min. Confocal laser scanning microscopy (CLSM) was applied to investigate the spatial structural dynamics of mono- and dual-species biofilms, and nuclear magnetic resonance (NMR) spectroscopy was employed to further investigate their metabolic responses toward chlorine. CLSM results indicated that mixed-species biofilms (total biovolume, 148,000 to 167,000 µm3) stimulated the growth of biomass 2 to 6 times that of single-species biofilms. Upon chlorine treatment, E. coli O45 and S. Typhimurium achieved less reduction (P < 0.05) when coexisting in mixed biofilms (0.70 and 1.17 log CFU/coupon reductions, respectively) compared with their corresponding single-species biofilms (1.97 and 2.01 log CFU/coupon reductions, respectively), while for E. coli O121, more reduction (P < 0.05) was achieved in a mixed biofilm (1.37 log CFU/coupon reductions) compared with its single-species biofilm (0.59 log CFU/coupon reductions). Moreover, NMR results suggested that the increase of putrescine (antioxidation regulator) and the decrease of glucose (enhanced glycolysis for energy replenishment) might contribute to the improved chlorine tolerance in mixed biofilms. Overall, dual-species biofilms promoted biofilm growth and their chlorine tolerance. This study improved our knowledge of the metabolic difference of single- and mixed-species biofilms of E. coli and Salmonella to chlorine sanitization and raised an urgency to investigate the effectiveness of common disinfectants against multispecies consortia. IMPORTANCE Outbreaks of Escherichia coli and Salmonella in food might be associated with the cross-contamination of biofilms on food-contact surfaces. The knowledge of the sanitization of mono-species biofilm on the food-contact surface is well established, while mixed-species biofilm occurs more naturally, which could profoundly affect the efficacy of sanitizer. Therefore, this research aims to evaluate the efficacy of using chlorine against single- and dual-species biofilms of E. coli and Salmonella along with the underlying bacterial metabolic responses. The responses of a mixed biofilm of E. coli and Salmonella to chlorine sanitization were clarified, providing insights to develop a targeted and green sanitization strategy against specific pathogens by perturbing their most susceptible metabolism pathway without sanitizer residue.

Deep-learning-based removal of autofluorescence and fluorescence quantification in plant-colonizing bacteria in vivo.

Fluorescence microscopy is common in bacteria-plant interaction studies. However, strong autofluorescence from plant tissues impedes in vivo studies on endophytes tagged with fluorescent proteins. To solve this problem, we developed a deep-learning-based approach to eliminate plant autofluorescence from fluorescence microscopy images, tested for the model endophyte Azoarcus olearius BH72 colonizing Oryza sativa roots. Micrographs from three channels (tdTomato for gene expression, green fluorescent protein (GFP) and AutoFluorescence (AF)) were processed by a neural network based approach, generating images that simulate the background autofluorescence in the tdTomato channel. After subtracting the model-generated signals from each pixel in the genuine channel, the autofluorescence in the tdTomato channel was greatly reduced or even removed. The deep-learning-based approach can be applied for fluorescence detection and quantification, exemplified by a weakly expressed, a cell-density modulated and a nitrogen-fixation gene in A. olearius. A transcriptional nifH::tdTomato fusion demonstrated stronger induction of nif genes inside roots than outside, suggesting extension of the rhizosphere effect for diazotrophs into the endorhizosphere. The pre-trained convolutional neural network model is easily applied to process other images of the same plant tissues with the same settings. This study showed the high potential of deep-learning-based approaches in image processing. With proper training data and strategies, autofluorescence in other tissues or materials can be removed for broad applications.

The architecture and metabolic traits of monospecific photosynthetic biofilms studied in a custom flow-through system.

Microalgae biofilms have great ecological importance and high biotechnological potential. Nevertheless, an in-depth and combined structural (i.e., the architecture of the biofilm) and physiological characterization of microalgae biofilms is still missing. An approach able to provide the same time physiological and structural information during biofilm growth would be of paramount importance to understand these complex biological systems and to optimize their productivity. In this study, monospecific biofilms of a diatom and a green alga were grown under dynamic conditions in custom flow cells represented by UV/Vis spectroscopic cuvettes. Such flow cells were conceived to characterize the biofilms by several techniques mostly in situ and in a nondestructive way. Physiological traits were obtained by measuring variable chlorophyll a fluorescence by pulse amplitude modulated fluorometry and by scanning the biofilms in a spectrometer to obtain in vivo pigments spectral signatures. The architectural features were obtained by imaging the biofilms with a confocal laser scanning microscopy and an optical coherence tomography. Overall, this experimental setup allowed us to follow the growth of two biofilm-forming microalgae showing that cell physiology is more affected in complex biofilms likely as a consequence of alterations in local environmental conditions.