Functional Roles of Two ß-Tubulin Isotypes in Regulation of Sensitivity of Colletotrichum fructicola to Carbendazim.

Colletotrichum fructicola is the major pathogen of anthracnose in tea-oil trees in China. Control of anthracnose in tea-oil trees mainly depends on the application of chemical fungicides such as carbendazim. However, the current sensitivity of C. fructicola isolates in tea-oil trees to carbendazim has not been reported. Here, we tested the sensitivity of 121 C. fructicola isolates collected from Guangdong, Guangxi, Guizhou, Hainan, Hunan, Jiangsu, and Jiangxi provinces in China to carbendazim. One hundred and ten isolates were sensitive to carbendazim, and 11 isolates were highly resistant to carbendazim. The growth rates, morphology, and pathogenicity of three resistant isolates were identical to those of three sensitive isolates, which indicates that these resistant isolates could form a resistant population under carbendazim application. These results suggest that carbendazim should not be the sole fungicide in control of anthracnose in tea-oil trees; other fungicides with different mechanisms of action or mixtures of fungicides could be considered. In addition, bioinformatics analysis identified two ß-tubulin isotypes in C. fructicola: Cfß1tub and Cfß2tub. E198A mutation was discovered in the Cfß2tub of three carbendazim-resistant isolates. We also investigated the functional roles of two ß-tubulin isotypes. CfΔß1tub exhibited slightly increased sensitivity to carbendazim and normal phenotypes. Surprisingly, CfΔß2tub was highly resistant to carbendazim and showed a seriously decreased growth rate, conidial production, pathogenicity, and abnormal hyphae morphology. Promoter replacement mutant CfΔß2-2×ß1 showed partly restored phenotypes, but it was still highly resistant to carbendazim, which suggests that Cfß1tub and Cfß2tub are functionally interchangeable to a certain degree.

Monitoring Corynespora cassiicola Resistance to Boscalid, Trifloxystrobin, and Carbendazim in China.

Cucumber leaf spot (CLS), caused by Corynespora cassiicola, is a serious disease of greenhouse cucumbers. With frequent use of existing fungicides, C. cassiicola has developed resistance to some of them, with serious implications for the control of CLS in the field. With a lack of new fungicides, it is necessary to use existing fungicides for effective control. Therefore, this study monitored the resistance of C. cassiicola to three commonly used and effective fungicides, boscalid, trifloxystrobin, and carbendazim, from 2017 to 2021. The frequency of resistance to boscalid showed an increasing trend, and the highest frequency was 85.85% in 2020. The frequency of resistance to trifloxystrobin was greater than 85%, and resistance to carbendazim was maintained at 100%. Among these fungicides, strains with multiple resistance to boscalid, trifloxystrobin, and carbendazim were found, accounting for 32.00, 25.25, 33.33, 43.06, and 37.24%, respectively. Of the strains that were resistant to boscalid, 87% had CcSdh mutations, including seven genotypes: B-H278L/Y, B-I280V, C-N75S, C-S73P, D-D95E, and D-G109V. Also, six mutation patterns of the Ccß-tubulin gene were detected: E198A, F167Y, E198A&M163I, E198A&F167Y, M163I&F167Y, and E198A&F200C. Detection of mutations of the CcCytb gene in resistant strains showed that 98.8% were found to have only the G143A mutation. A total of 27 mutation combinations were found and divided into 14 groups for analysis. The resistance levels differed according to genotype. The development of genotypes showed a complex trend, increasing from 4 in 2017 to 13 in 2021 and varying by region. Multiple fungicide resistance is gradually increasing. Therefore, it is necessary to understand the types of mutations and the trend of resistance to guide the use of fungicides to achieve disease control.

Fungicide resistance in Colletotrichum fructicola and Colletotrichum siamense causing peach anthracnose in China.

Peach is one of the popular and economically important fruit crops in China. Peach cultivation is hampered due to attacks of anthracnose disease, causing significant economic losses. Colletotrichum fructicola and Colletotrichum siamense belong to the Colletotrichum gloeosporioides species complex and are considered major pathogens of peach anthracnose. Application of different groups of fungicides is a routine approach for controlling this disease. However, fungicide resistance is a significant drawback in managing peach anthracnose nowadays. In this study, 39 isolates of C. fructicola and 41 isolates of C. siamense were collected from different locations in various provinces in China. The sensitivity of C. fructicola and C. siamense to some commonly used fungicides, i.e., carbendazim, iprodione, fluopyram, and propiconazole, was determined. All the isolates of C. fructicola collected from Guangdong province showed high resistance to carbendazim, whereas isolates collected from Guizhou province were sensitive. In C. siamense, isolates collected from Hebei province showed moderate resistance, while those from Shandong province were sensitive to carbendazim. On the other hand, all the isolates of C. fructicola and C. siamense showed high resistance to the dicarboximide (DCF) fungicide iprodione and succinate dehydrogenase inhibitor (SDHI) fungicide fluopyram. However, they are all sensitive to the demethylation inhibitor (DMI) fungicide propiconazole. Positive cross-resistance was observed between carbendazim and benomyl as they are members of the same methyl benzimidazole carbamate (MBC) group. While no correlation of sensitivity was observed between different groups of fungicides. No significant differences were found in each fitness parameter between carbendazim-resistant and sensitive isolates in both species. Molecular characterization of the ß-tubulin 2 (TUB2) gene revealed that in C. fructicola, the E198A point mutation was the determinant for the high resistance to carbendazim, while the F200Y point mutation was linked with the moderate resistance to carbendazim in C. siamense. Based on the results of this study, DMI fungicides, e.g., propiconazole or prochloraz could be used to control peach anthracnose, especially at locations where the pathogens have already developed the resistance to carbendazim and other fungicides.

A smartphone-integrated aptasensor for pesticide detection using gold-decorated microparticles.

The increasing incidence of environmental concerns related to excessive use of pesticides, such as imidacloprid and carbendazim, poses risks to pollinators, water bodies, and human health, prompting regulatory scrutiny and bans in developed countries. In this study, we propose a portable smartphone-based biosensor for rapid and label-free colorimetric detection by using the gold-decorated polystyrene microparticles (Ps-AuNP) functionalized with specific aptamers to imidacloprid and carbendazim on a microfluidic paper-based analytical device (µ-PAD). Four aptamers were selected for the detection of these pesticides and their sensitivity and selectivity performance was evaluated. The sensitivity results show a detection limit for imidacloprid of 3.12 ppm and 1.56 ppm for carbendazim. The aptamers also exhibited high selectivity performance against other pesticides, such as thiamethoxam, fenamiphos, isoproturon, and atrazine. However, the platform presented cross-selectivity when detecting imidacloprid, carbendazim, and linuron, which is discussed herein. Overall, we present a promising platform for simple, on-site, and rapid colorimetric screening of specific pesticides, while highlighting the challenges of aptasensors in achieving selectivity amidst diverse molecular structures.

2D/1D VSe2/MWCNT hybrid-based electrochemical sensor for carbendazim quantification of environmental, food, and biological samples.

For the first time the sensitive determination of carbendatim (CRB) is reported utilizing a well-designed sensing architecture based on vanadium diselenide-multiwalled carbon nanotube (VSMC). FTIR, XRD, FESEM, EDS, and EIS were employed to evaluate the sensor's structural integrity, and the results demonstrated the successful integration of nanomaterials, resulting in a robust and sensitive electrochemical sensor. Cyclic voltammetry (CV) and chronoamperometric (CA) investigations showed that the sensor best performed at pH 8.0 (BRB) with an excellent detection limit of 9.80 nM with a wide linear range of 0.1 to 10.0 µM. A more thermodynamically viable oxidation of CRB was observed at the VSMC/GCE, with a shift of 200 mV in peak potential towards the less positive side compared with the unmodified GCE. In addition, the sensor demonstrated facile heterogeneous electron transfer, favorable anti-fouling traits in the presence of a wide range of interferents, good stability, and reproducible analytical performance. Finally, the developed sensor was validated for real-time quantification of CRB from spiked water, food, and bio-samples, which depicted acceptable recoveries (98.6 to 101.5%) with RSD values between 0.35 and 2.23%. Further, to derive the possible sensing mechanism, the valence orbitals projected density of states (PDOS) for C, H, and N atoms of an isolated CRB molecule, VSe2 + CNT and VSe2 + CNT + CRB were calculated using density functional theory (DFT) calculations. The dominant charge transfer from the valence 2p-orbitals of the C and N atoms of CRB to CNT is responsible for the electrochemical sensing of CRB molecules.

Highly sensitive electrochemical quantification of carbendazim via synergistic enhancement of ring-opening metathesis polymerization and polyethyleneimine modified graphene oxide.

A novel aptamer-based sensor was developed using the signal amplification strategy of ring-opening metathesis polymerization (ROMP) and polyethyleneimine modified graphene oxide to achieve trace detection of carbendazim (CBZ). The dual identification of aptamer and antibody was used to avoid false positive results and improve the selectivity. Polyethyleneimine modified graphene oxide (GO-PEI), as a substrate material with excellent conductivity, was modified on the surface of a glassy carbon electrode (GCE) to increase the grafting amount of aptamer on the electrode surface. Moreover, a large number of cyclopentenyl ferrocene (CFc) was aggregated to form long polymer chains through ring-opening metathesis polymerization (ROMP), so as to significantly improve the detection sensitivity of the biosensor. The linear range of this sensor was 1 pg/mL-100 ng/mL with a detection limit as low as 7.80 fg/mL. The sensor exhibited excellent reproducibility and stability, and also achieved satisfactory results in actual sample detection. The design principle of such a sensor could provide innovative ideas for sensors in the detection of other types of targets.

Design and synthesis of nano-iron oxyhydroxide-based molecularly imprinted electrochemical sensors for trace-level carbendazim detection in actual samples.

Carbendazim (CBD) is widely used as a fungicide that acts as a pesticide in farming to prevent crop diseases. However, CBD can remain on crops for a long time. When consumed by humans and animals, it produces a range of toxic symptoms and poses a serious threat to their health. Therefore, the detection of CBD is necessary. Traditional assay strategies for CBD detection, although sensitive and practical, can hardly achieve fast, robust monitoring during food processing and daily life. Here, we designed a novel electrochemical sensor for CBD detection. In this method, iron oxyhydroxide nanomaterial (ß-FeOOH) was first prepared by hydrothermal method. Then, a molecularly imprinted polymer (MIP) layer was electropolymerized on the surface using CBD as the template and resorcinol (RC) as the functional monomer. The synergistic interaction between ß-FeOOH and MIP endows the MIP/ß-FeOOH/CC-based electrochemical sensor with high specificity and sensitivity. Under optimal conditions, the MIP/ß-FeOOH/CC-based sensor showed a wide linear range of 39 pM-80 nM for CBD and a detection limit as low as 25 pM. Therefore, the as-prepared sensor can be a practical and effective tool for pesticide residue detection.

Photocatalytic Deposition of Au Nanoparticles on Ti3C2Tx MXene Substrates for Surface-Enhanced Raman Scattering.

Surface-enhanced Raman scattering (SERS) is a promising technique for sensitive detection. The design and optimization of plasma-enhanced structures for SERS applications is an interesting challenge. In this study, we found that the SERS activity of MXene (Ti3C2Tx) can be improved by adding Au nanoparticles (NPs) in a simple photoreduction process. Fluoride-salt-etched MXene was deposited by drop-casting on a glass slide, and Au NPs were formed by the photocatalytic growth of gold(III) chloride trihydrate solutions under ultraviolet (UV) irradiation. The Au-MXene substrate formed by Au NPs anchored on the Ti3C2Tx sheet produced significant SERS through the synergistic effect of chemical and electromagnetic mechanisms. The structure and size of the Au-decorated MXene depended on the reaction time. When the MXene films were irradiated with a large number of UV photons, the size of the Au NPs increased. Hot spots were formed in the nanoscale gaps between the Au NPs, and the abundant surface functional groups of the MXene effectively adsorbed and interacted with the probe molecules. Simultaneously, as a SERS substrate, the proposed Au-MXene composite exhibited a wider linear range of 10-4-10-9 mol/L for detecting carbendazim. In addition, the enhancement factor of the optimized SERS substrate Au-MXene was 1.39 × 106, and its relative standard deviation was less than 13%. This study provides a new concept for extending experimental strategies to further improve the performance of SERS.

Research Progress on Benzimidazole Fungicides: A Review.

Benzimidazole fungicides are a class of highly effective, low-toxicity, systemic broad-spectrum fungicides developed in the 1960s and 1970s, based on the fungicidal activity of the benzimidazole ring structure. They exhibit biological activities including anticancer, antibacterial, and antiparasitic effects. Due to their particularly outstanding antibacterial properties, they are widely used in agriculture to prevent and control various plant diseases caused by fungi. The main products of benzimidazole fungicides include benomyl, carbendazim, thiabendazole, albendazole, thiophanate, thiophanate-methyl, fuberidazole, methyl (1-{[(5-cyanopentyl)amino]carbonyl}-1H-benzimidazol-2-yl) carbamate, and carbendazim salicylate. This article mainly reviews the physicochemical properties, toxicological properties, disease control efficacy, and pesticide residue and detection technologies of the aforementioned nine benzimidazole fungicides and their main metabolite (2-aminobenzimidazole). On this basis, a brief outlook on the future research directions of benzimidazole fungicides is presented.

Microbial degradation of the benzimidazole fungicide carbendazim by Bacillus velezensis HY-3479.

Carbendazim (methyl benzimidazol-2-ylcarbamate: MBC) is a fungicide of the benzimidazole group that is widely used in the cultivation of pepper, ginseng, and many other crops. To remove the remnant carbendazim, many rhizobacteria are used as biodegradation agents. A bacterial strain of soil-isolated Bacillus velezensis HY-3479 was found to be capable of degrading MBC in M9 minimal medium supplemented with 250 mg/L carbendazim. The strain had a significantly higher degradation efficiency compared to the control strain Bacillus subtilis KACC 15590 in high-performance liquid chromatography (HPLC) analysis, and HY-3479 had the best degradation efficiency of 76.99% at 48 h. In gene expression analysis, upregulation of carbendazim-degrading genes (mheI, hdx) was observed in the strain. HY-3479 was able to use MBC as the sole source of carbon and nitrogen, but the addition of 12.5 mM NH4NO3 significantly increased the degradation efficiency. HPLC analysis showed that the degradation efficiency increased to 87.19% when NH4NO3 was added. Relative gene expression of mheI and hdx also increased for samples with NH4NO3 supplementation. The enzyme activity of the carbendazim-degrading enzyme and the 2-aminobenzimidazole-degrading enzyme was found to be highly present in the HY-3479 strain. It is the first reported B. velezensis strain to biodegrade carbendazim (MBC). The biodegradation activity of strain HY-3479 may be developed as a useful means for bioremediation and used as a potential microbial agent in sustainable agriculture.

Rational design of Nd2O3 decorated functionalized carbon nanofiber composite for selective electrochemical detection of carbendazim fungicides in vegetables, water, and soil samples.

Abuse of carbendazim (CBZ) leaves excessive pesticide residues on agricultural products, which endangers human health because of the residues' high concentrations. Hence, a composite consisting of functionalized carbon nanofibers (f-CNF) with neodymium oxide (Nd2O3) was fabricated to monitor CBZ at trace levels. The Nd2O3/f-CNF composite-modified electrode displays higher electro-oxidation ability towards CBZ than Nd2O3 and f-CNF-modified electrodes. The combined unique properties of Nd2O3 and f-CNF result in a substantial specific surface area, superior structural stability, and excellent electrocatalytic activity of the composite yielding enhanced sensitivity to detecting CBZ with a detection limit of 4.3 nM. Also, the fabricated sensor electrode can detect CBZ in the linear concentration range of up to 243.0 µM with high selectivity, appropriate reproducibility, and stability. A demonstration of the sensing capability of CBZ in vegetables, water, and soil samples was reported paving the way for its use in practical applications.

Natural soils in OECD 222 testing - influence of soil water and soil properties on earthworm reproduction toxicity of carbendazim.

Soil sorption properties can influence the bioavailability of substances and consequently the toxicity for soil organisms. Current standardised laboratory testing for the exposure assessment of pesticides to soil organisms uses OECD artificial soil that does not reflect the high variation in chemical-physical soil properties found in natural agroecosystems. According to guideline OECD 222, earthworm reproduction tests with Eisenia fetida and the pesticide carbendazim were performed in four natural soils and OECD artificial soil. By using pF 1.6, which ensures a uniformity in actual soil water availability, the control reproduction performance of E. fetida in all natural soils was at the same level as OECD artificial soil. In a principle component analysis, the variation in toxicity between the tested soils was attributable to a combination of two soil properties, namely total organic carbon content (TOC) and pH. The largest difference of 4.9-fold was found between the typical agricultural Luvisol with 1.03% TOC and pH 6.2 (EC10: 0.17 (0.12-0.21) mg a.i. kg-1 sdw, EC50: 0.36 (0.31-0.40) mg a.i. kg-1 sdw) and OECD artificial soil with 4.11% TOC and pH 5.6 (EC10: 0.84 (0.72-0.92) mg a.i. kg-1 sdw, EC50: 1.07 (0.99-1.15) mg a.i. kg-1 sdw). The use of typical agricultural soils in standardised laboratory earthworm testing was successfully established with using the measure pF for soil moisture adjustment. It provides a more application-oriented approach and could serve as a new tool to refine the environmental risk assessment at lower tier testing or in an intermediate tier based approach.

Interactive effect of carbendazim and imidacloprid on buffalo bone marrow derived mesenchymal stem cells: oxidative stress, cytotoxicity and genotoxicity.

The effect of a combination of two pesticides, carbendazim (CBZ) and imidacloprid (IMI), was investigated on mesenchymal stem cells derived from the bone marrow of buffalo (bMSCs). The bMSCs were exposed to the CBZ (2.25 µM, 4.49 µM, and 8.98 µM) and IMI (0.81 mM, 1.61 mM, and 3.22 mM) alone as well as in combinations. The bMSCs were found to be positive for the stem cell markers, AP, CD73, and OCT4. The bMSCs showed a significant reduction (p ≤ 0.05) in cell viability, and status of anti-oxidants while a significant increase (p ≤ 0.05) in the level of LDH, ALP, and CK-MB in CBZ and IMI-treated groups. A significant increase (p ≤ 0.05) was noticed in LPO, O2─ radical, total ROS, loss of ΔΨm, apoptotic index, and DNA damage in CBZ and IMI-treated groups. A low-dose combination group showed an elevated effect compared to the groups treated with the single pesticide. The interaction index was calculated for CBZ-IMI combined treatment groups on various parameters that showed the majority of antagonist effects. Present findings confirmed that CBZ and IMI-induced cytotoxicity in bMSCs was mediated via ROS production, altered ΔΨm and LPO along with depressed antioxidant status which was responsible for cell apoptosis and cell damage. This study suggested that CBZ and IMI had a dose-dependent toxic effect when the pesticides were used alone, while, co-exposure to both the pesticides simultaneously had an antagonist or non-additive effect on buffalo bMSCs at lower dose combinations and they induced a potentiating effect at high-dose combination.

Dynamics of Carbendazim-Resistance Frequency of Pathogens Associated with the Epidemic of Fusarium Head Blight.

Carbendazim resistance was detected using 4,701 Fusarium graminearum species complex isolates collected from major wheat-producing regions in China from 2018 to 2020. A total of 348 carbendazim-resistant isolates were identified. The majority of carbendazim-resistant isolates were detected in Jiangsu and Anhui Provinces. In total, 227 and 88 isolates were obtained from each of the Jiangsu and Anhui Provinces, with a high resistance frequency of 41.12 and 20.56%, respectively. The predominant resistant isolates harboring point mutations were F167Y (79.31%), followed by E198Q (16.38%) and F200Y (4.31%). Compared with F. graminearum, F. asiaticum isolates were more likely to produce carbendazim resistance. In this study, we first detected carbendazim-resistant isolates in Hebei, Shaanxi, Sichuan, and Hunan Provinces. In Jiangsu, Anhui, and Zhejiang, the frequency of carbendazim-resistant isolates maintained a high level, resulting in stable carbendazim-resistant populations. We also found the dynamic of carbendazim-resistance frequency in most provinces showed similar trends to the epidemic of Fusarium Head Blight (FHB). Our results facilitate the understanding of the current situation of carbendazim resistance of FHB pathogens and will be helpful for fungicides selection in different wheat-producing areas in China.

Introduction of multilayered quantum dot nanobeads into competitive lateral flow assays for ultrasensitive and quantitative monitoring of pesticides in complex samples.

A competitive fluorescent lateral flow assay (CFLFA) is proposed for direct, ultrasensitive, quantitative detection of common pesticides imidacloprid (IMI) and carbendazim (CBZ) in complex food samples by using silica-core multilayered quantum dot nanobeads (SiO2-MQB) as liquid fluorescent tags. The SiO2-MQB nanostructure comprises a 200-nm SiO2 core and a shell of hundreds of carboxylated QDs (excitation/emission maxima ~365/631 nm), and can generate better stability, superior dispersibility, and higher luminescence than traditional fluorescent beads, greatly improving the sensitivity of current LFA methods for pesticides. Moreover, using liquid SiO2-MQB directly instead of via the conjugate pad both simplifies the structure of LFA system and improves the efficiency of immunobinding reactions between nanotags and the targets. Applying these methods, the established CFLFA realized the stable and accurate detection of IMI and CBZ in 12 min, with detection limits down to 1.94 and 14.79 pg/mL, respectively. The SiO2-MQB-CFLFA is practicable for application to real food samples (corn, apple, cucumber, and cabbage), and undoubtedly a promising and low-cost tool for on-site monitoring of trace pesticide residues.

Impedimetric sensing platform for sensitive carbendazim detection using MOCVD-synthesized copper graphene.

Nanostructures of graphene were synthesized for electrochemical carbendazim (CBZ) fungicide detection via metal-organic chemical vapor deposition (MOCVD). The arduous process of graphene transfer is eliminated by this innovative approach to MOCVD graphene development. It also generates several defects and impurities and ultimately leads to the uniform deposition of graphene on SiO2/Si. SEM, EDX, and ICP-AES were used to assess the morphological properties and chemical composition of the materials. To obtain in-depth knowledge of the entire system, the electrochemical behavior was also investigated using voltammetric techniques and electrochemical impedance spectroscopy. The interaction of particles of copper with CBZ and the enhanced surface area of graphene, which causes a strong oxidation current, has been demonstrated to achieve the ideal CBZ sensing behavior. The electrode responded linearly at CBZ concentration levels of 1 to 50 nM, and the sensitivity of the sensing materials was estimated to be 0.0337 Ω nM-1. The statistical analysis validates the electrode's exceptional selectivity and remarkable reproducibility in determining CBZ.

Simple pyrolysis of graphene-wrapped PtNi nanoparticles supported on hierarchically N-doped porous carbon for sensitive detection of carbendazim.

A novel electrochemical sensor was established based on graphene-wrapped PtNi nanoparticles supported on three-dimensional (3D) N-doped porous carbon (G-PtNi/3D-NPC) for the highly sensitive and selective detection of carbendazim (CBZ). In this sensing system, the encapsulation of PtNi nanoparticles (NPs) by graphene can effectively prevent the aggregation tendency and enhance the structural stability. The hierarchically porous nanostructures have a large specific surface area to expose a large number of active sites and the resulting enhanced electrical conductivity ultimate improves the electrocatalytic activity towards CBZ. Under the optimal conditions, the prepared sensor showed excellent electrochemical responses for the determination of CBZ with a linear range of 0.5-30 µM and lower limit of detection (LOD) of 0.04 µM (S/N = 3). It also shows excellent anti-interference ability at a working potential of 0.74 V. The feasibility of the senor is demonstrated for its practical assays in diluted peach and vegetable samples with acceptable recovery (95.8-97.3 %, peach; 97.2-97.6 %, vegetable) and a relative standard deviation (RSD) below 2.3%.

MWCNTs and ZnO-based Ce-MOF nanocomposites as enhanced sensing platform for electrochemical detection of carbendazim in Chinese traditional herbs samples.

A facile and novel Ce-MOF@MWCNTs@ZnO-modified glassy carbon electrode was prepared through drop coating and used for accurate and sensitive electrochemical detection of carbendazim. The modification of ZnO nanospheres and Ce-based metal-organic frameworks (Ce-MOFs), which possess vast surface/bulk ratio, large surface area, and excellent catalytic ability, provided more active sites for reaction. The combination of multi-walled carbon nanotubes endowed the modified electrode with excellent conductivity and greatly accelerated the electron transfer. The promotion of electrochemical response and the significant improvement of peak current indicated the outstanding electrocatalytic ability of the modified electrode. The oxidation peak current of carbendazim which was measured by DPV in a potential range from 0.5 to 1.0 V produced a good linear relationship in the concentration ranges 0.05-10.0 µM and 10.0-50.0 µM under  optimized experimental conditions. The detection limit was 13.2 nM (S/N = 3). The constructed electrode was successfully applied to the detection of carbendazim in Lithospermum and Glycyrrhiza uralensis real samples and exhibited satisfactory RSD (2.7-3.6% and 1.6-4.8%, respectively) and recovery (102-106% and 97.7-107%, respectively).

Sensitive dual-mode detection of carbendazim by molecularly imprinted electrochemical sensor based on biomass-derived carbon-loaded gold nanoparticles.

A dual-mode electrochemical sensor was fabricated for carbendazim (CBD) detection. Biomass-derived carbon loaded gold nanoparticles (AuNPs/BC) were firstly coated on a glassy carbon electrode (GCE), and then molecularly imprinted polymer (MIP) of o-aminophenol was prepared on the resulting AuNPs/BC/GCE through electrochemical method in the presence of CBD. The AuNPs/BC had excellent conductivity, large surface and good electrocatalysis, while the imprinted film presented good recognition. Thus, the obtained MIP/AuNPs/BC/GCE exhibited sensitive current response to CBD. Furthermore, the sensor displayed good impedance response to CBD. Hence, a dual-mode detection platform for CBD was established. Under optimum conditions, the linear response ranges were as wide as 1.0 nM - 15 µM (by differential pulse voltammetry, DPV) and 1.0 nM - 10 µM (by electrochemical impedance spectroscopy, EIS), and the detection limits for these two methods were as low as 0.30 nM (S/N = 3) and 0.24 nM (S/N = 3), respectively. The sensor also had high selectivity, stability and reproducibility. The sensor was applied to detect CBD in spiked real samples, including cabbage, peach, apple and lake water, and the recoveries were 85.8-108% (by DPV) and 91.4-110% (by EIS); the relative standard deviations (RSD) were 3.4-5.3% (by DPV) and 3.7-5.1% (by EIS), respectively. The results were consistent with that obtained by high-performance liquid chromatography. Therefore, this sensor is a simple and effective tool for CBD detection, and it has good application potential.

Insight into functional mechanisms of percarbamide and nitrification inhibitors in degrading fungicide residues and shaping microbial communities in soil-plant systems.

Fungicides and nitrogen (N) fertilizers are essential to maintain plant yield in current intensive agriculture. Percarbamide is a novel type of N fertilizer with strong oxidizing property, and the nitrification inhibitor is widely used in agricultural production. It may be feasible to apply percarbamide and nitrification inhibitor as N management to promote fungicide dissipations in soil-plant system. This study quantified the effects of percarbamide and nitrification inhibitor dicyandiamide (DCD) and 3, 4-dimethylpyrazole phosphate (DMPP) on carbendazim residues, and microbial communities of soil-plant systems, and relationships among carbendazim residues, soil and endophytic microbial communities and plant yields were also comprehensively quantified. Compared with the control, the percarbamide significantly reduced soil carbendazim residues by 29.4% but enhanced the lettuce yield by 28.0%. Soil carbendazim residues were significantly and negatively correlated with the soil total N and NO3--N contents. Soil microbial community structures and co-occurrence networks were more sensitive to N management than their endophytic counterparts. In comparison to the percarbamide alone, the DCD significantly increased the nodes of soil fungal community co-occurrence network which were positively correlated with the plant yield. The DCD outweighed DMPP in increasing the lettuce yield and soil fungal community stability and reshaping soil bacterial community structure. Our study suggested that soil microbial communities were more sensitive to percarbamide and nitrification inhibitor applications than their endophytic counterparts under fungicide pressure and that the DCD outweighed DMPP in reshaping microbial communities. The integrated applications of percarbamide and nitrification inhibitors were promising soil N management strategies to promote fungicide removal and stimulate microbial community in the soil-plant systems.