Unusual reactivity of a flavin in a bifurcating electron-transferring flavoprotein leads to flavin modification and a charge-transfer complex.

From the outset, canonical electron transferring flavoproteins (ETFs) earned a reputation for containing modified flavin. We now show that modification occurs in the recently recognized bifurcating (Bf) ETFs as well. In Bf ETFs, the 'electron transfer' (ET) flavin mediates single electron transfer via a stable anionic semiquinone state, akin to the FAD of canonical ETFs, whereas a second flavin mediates bifurcation (the Bf FAD). We demonstrate that the ET FAD undergoes transformation to two different modified flavins by a sequence of protein-catalyzed reactions that occurs specifically in the ET site, when the enzyme is maintained at pH 9 in an amine-based buffer. Our optical and mass spectrometric characterizations identify 8-formyl flavin early in the process and 8-amino flavins (8AFs) at later times. The latter have not previously been documented in an ETF to our knowledge. Mass spectrometry of flavin products formed in Tris or bis-tris-aminopropane solutions demonstrates that the source of the amine adduct is the buffer. Stepwise reduction of the 8AF demonstrates that it can explain a charge transfer band observed near 726 nm in Bf ETF, as a complex involving the hydroquinone state of the 8AF in the ET site with the oxidized state of unmodified flavin in the Bf site. This supports the possibility that Bf ETF can populate a conformation enabling direct electron transfer between its two flavins, as has been proposed for cofactors brought together in complexes between ETF and its partner proteins.

Identification of a Ubiquinone-Ubiquinol Quinhydrone Complex in Bacterial Photosynthetic Membranes and Isolated Reaction Centers by Time-Resolved Infrared Spectroscopy.

Ubiquinone redox chemistry is of fundamental importance in biochemistry, notably in bioenergetics. The bi-electronic reduction of ubiquinone to ubiquinol has been widely studied, including by Fourier transform infrared (FTIR) difference spectroscopy, in several systems. In this paper, we have recorded static and time-resolved FTIR difference spectra reflecting light-induced ubiquinone reduction to ubiquinol in bacterial photosynthetic membranes and in detergent-isolated photosynthetic bacterial reaction centers. We found compelling evidence that in both systems under strong light illumination-and also in detergent-isolated reaction centers after two saturating flashes-a ubiquinone-ubiquinol charge-transfer quinhydrone complex, characterized by a characteristic band at ~1565 cm-1, can be formed. Quantum chemistry calculations confirmed that such a band is due to formation of a quinhydrone complex. We propose that the formation of such a complex takes place when Q and QH2 are forced, by spatial constraints, to share a common limited space as, for instance, in detergent micelles, or when an incoming quinone from the pool meets, in the channel for quinone/quinol exchange at the QB site, a quinol coming out. This latter situation can take place both in isolated and membrane bound reaction centers Possible consequences of the formation of this charge-transfer complex under physiological conditions are discussed.

Spectrophotometric Study of Charge-Transfer Complexes of Ruxolitinib with Chloranilic Acid and 2,3-Dichloro-5,6-dicyano-1,4-benzoquinone: An Application to the Development of a Green and High-Throughput Microwell Method for Quantification of Ruxolitinib in Its Pharmaceutical Formulations.

Ruxolitinib (RUX) is a potent drug that has been approved by the Food and Drug Administration for the treatment of myelofibrosis, polycythemia vera, and graft-versus-host disease. This study describes the formation of colored charge-transfer complexes (CTCs) of RUX, an electron donor, with chloranilic acid (CLA) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), the π-electron acceptors. The CTCs were characterized using UV-visible spectrophotometry. The formation of CTCs in methanol was confirmed via formation of new absorption bands with maximum absorption at 530 and 470 nm for CTCs with CLA and DDQ, respectively. The molar absorptivity and other physicochemical and electronic properties of CTCs were determined. The molar ratio was found to be 1:1 for both CTCs with CLA and CTCs with DDQ. The site of interaction on RUX molecules was assigned and the mechanisms of the reactions were postulated. The reactions were employed as basis for the development of a novel green and one-step microwell spectrophotometric method (MW-SPM) for high-throughput quantitation of RUX. Reactions of RUX with CLA and DDQ were carried out in 96-well transparent plates, and the absorbances of the colored CTCs were measured by an absorbance microplate reader. The MW-SPM was validated according to the ICH guidelines. The limits of quantitation were 7.5 and 12.6 µg/mL for the methods involving reactions with CLA and DDQ, respectively. The method was applied with great reliability to the quantitation of RUX content in Jakavi® tablets and Opzelura® cream. The greenness of the MW-SPM was assessed by three different metric tools, and the results proved that the method fulfills the requirements of green analytical approaches. In addition, the one-step reactions and simultaneous handling of a large number of samples with micro-volumes using the proposed method enables the high-throughput analysis. In conclusion, this study describes the first MW-SPM, a valuable analytical tool for the quality control of pharmaceutical formulations of RUX.

Spectrophotometric Investigations of Charge Transfer Complexes of Tyrosine Kinase Inhibitors with Iodine as a σ-Electron Acceptor: Application to Development of Universal High-Throughput Microwell Assay for Their Determination in Pharmaceutical Formulations.

Background and Objective: Tyrosine kinase inhibitors (TKIs) are used for the treatment of different types of cancers. The current study describes, for the first time, the ultraviolet-visible spectrophotometric investigation of charge transfer complexes (CTCs) of seven TKIs, as electron donors, and iodine, as σ-electron. Materials and Methods: The formation of CTCs was promoted in dichloromethane, among the other solvents used in the investigation. The molar absorptivity values, association constants, and free energy changes of the CTCs were determined. Stoichiometric ratio of TKI: iodine as well as TKIs site(s) of interaction were addressed. Reaction was the basis for constructing a novel simple and accurate 96-microwell spectrophotometric assay (MW-SPA) with high-throughput property for the quantitative determination of TKIs in their pharmaceutical formulations. Results: Beer's law, which relates CTC absorbances to TKI concentrations, was followed within the optimal range of 2 to 100 µg/well (r ranged from 0.9991 to 0.9998). Detection and quantification limits ranged from 0.91 to 3.60 and 2.76 to 10.92 g µmL-1, respectively. Relative standard deviations values for the intra- and inter-assay precisions of the proposed MW-SPA did not exceed 2.13 and 2.34%, respectively. Studies of recovery demonstrated MW-SPA accuracy, with results ranging from 98.9% to 102.4%. All TKIs, both in bulk form and in pharmaceutical formulations (tablets), were effectively determined using the suggested MW-SPA. Conclusions: The current MW-SPA involved a simple procedure and it was convenient as it could analyse all proposed TKIs utilizing a single assay system at once measuring wavelengths for all TKIs. In addition, the proposed MW-SPA has high throughput which enables the processing of a batch of huge samples' number in very short reasonable time period. In conclusion, TKIs can be routinely analysed in their dosage forms in quality control laboratories, and the assay can be highly valuable and helpful in this regard.

Novel High-Throughput Microwell Spectrophotometric Assay for One-Step Determination of Lorlatinib, a Novel Potent Drug for the Treatment of Anaplastic Lymphoma Kinase (ALK)-Positive Non-Small Cell Lung Cancer.

Background and Objectives: Lorlatinib (LOR) belongs to the third-generation anaplastic lymphoma kinase (ALK) tyrosine kinase inhibitors. People who are diagnosed with ALK-positive metastatic and advanced non-small cell lung cancer (NSCLC) are eligible to get it as a first-line treatment option after it was given the approval by "the Food and Drug Administration (FDA)". However, no study has described constructing high-throughput analytical methodology for LOR quantitation in dosage form. For the first time, this work details the construction of a high-throughput, innovative microwell spectrophotometric assay (MW-SPA) for single-step assessment of LOR in its tablet form, for use in pharmaceutical quality control. Materials and Methods: Assay depended on charge transfer complex (CTC) formation between LOR, as electron donor, with 2,3-dichloro-3,5-dicyano-1,4-benzoquinone (DDQ), as π-electron acceptor. Reaction conditions were adjusted, the CTC was characterized by ultraviolet (UV)-visible spectrophotometry and computational molecular modeling, and its electronic constants were determined. Site of interaction on LOR molecule was allocated and reaction mechanism was suggested. Under refined optimum reaction conditions, the procedures of MW-SPA were performed in 96-well assay plates, and the responses were recorded by an absorbance plate reader. Validation of the current methodology was performed in accordance with guidelines of "the International Council on Harmonization (ICH)", and all validation parameters were acceptable. Results: Limits of detection and quantitation of MW-SPA were 1.8 and 5.5 µg/well, respectively. The assay was applied with great success for determining LOR in its tablets. Conclusions: This The assay is straightforward, economic and has high-throughput characteristics. Consequently, the assay is recommended as a valuable analytical approach in quality control laboratories for LOR's tablets' analysis.

Visible-Light-Induced Photoreduction of Carborane Phosphonium Salts: Efficient Synthesis of Carborane-Oxindole-Pharmaceutical Hybrids.

Visible-light-induced photoreaction of carboranes is an effective approach to prepare carborane-containing compounds. While several methods involving boron-centered carboranyl radicals have been established, those for carbon-centered carboranyl radicals are underdeveloped, except for the UV-light-promoted photohomolysis. Herein, we describe a simple but effective approach to access carbon-centered carboranyl radicals by photoreduction of carborane phosphonium salts under blue light irradiation without using transition metals and photocatalysts. The utility of the method was demonstrated by successfully preparing a range of carborane-oxindole-pharmaceutical hybrids by radical cascade reactions. Computational and experimental studies suggest that the carbon-centered carboranyl radicals are generated by single-electron transfer of the photoactive charge-transfer complexes between the salts and the additive potassium acetate.

Tamoxifen charge transfer complexes with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone and 7,7,8,8-tetracyanoquinodimethan: Synthesis, spectroscopic characterization and theoretical study.

To understand bioactive molecule-receptor interactions it is important to understand the molecular complexation and structural recognition properties of the materials in question. To this aim, the electron donating bioactive molecule tamoxifen (TAM) was combined with the electron accepting molecules 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) to form TAM-DDQ and TAM-TCNQ charge transfer (CT) complexes. The properties of the complexes in solution and solid, their donor-acceptor interactions were investigated, and their stability was assessed in acetonitrile. Solid complexes of TAM-DDQ and TAM-TCNQ were characterized using nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectroscopies to confirm their formation. Job's and modified Benesi-Hildebrand methods were used to study the stoichiometries and association constants of TAM-DDQ and TAM-TCNQ, from which their stoichiometries were found to be 1:1. The physical parameters of the CT complexes in terms of their molar extension constants, dipole moments, and formation constants were determined to study their stability in solution. The results obtained in this study indicate that the complexes are suitable for assessing TAM in pharmaceutical preparations. The experimental results were complemented by density functional theory (geometry optimization, energy transition, and molecular electrostatic potential maps) at DFT/B3LYPlevel of theory.

Synthesis, spectroscopic and computational characterization of charge transfer complex of remdesivir with chloranilic acid: Application to development of novel 96-microwell spectrophotometric assay.

Remdesivir (REM) is an adenosine triphosphate analog antiviral drug that has received authorization from European Commission and approval from the U.S. Food and Drug Administration for treatment of coronavirus disease 2019 (Covid-19). This study, describes, for the first time, the synthesis of a novel charge transfer complex (CTC) between REM, as electron donor, with chloranilic acid (CLA), as π electron acceptor. The CTC was characterized using different spectroscopic and thermogravimetric techniques. UV-visible spectroscopy ascertained the formation of the CTC in methanol via formation of a new broad absorption band with maximum absorption peak (λmax) at 530 nm. The molar absorptivity (ε) of the complex was 3.33 × 103 L mol-1 cm-1 and its band gap energy was 1.91 eV. The stoichiometric ratio of REM:CLA was found to be 1:1. The association constant of the complex was 1.11 × 109 L mol-1, and its standard free energy was 5.16 × 104 J mole-1. Computational calculation for atomic charges of energy minimized REM was conducted, the site of interaction on REM molecule was assigned and the mechanism of the reaction was postulated. The solid-state CTC was further characterized by FT-IR and 1H NMR spectroscopic techniques. Both FT-IR and 1H NMR confirmed the formation of the CTC and its structure. The reaction was adopted as a basis for developing a novel 96-microwell spectrophotometric method (MW-SPA) for REM. The assay limits of detection and quantitation were 3.57 and 10.83 µg/well, respectively. The assay was validated, and all validation parameters were acceptable. The assay was implemented successfully with great precision and accuracy to the determination of REM in its bulk form and pharmaceutical formulation (injection). This assay is simple, economic, and more importantly, has high throughput property. Therefore, the assay can be valuable for routine in quality control laboratories for analysis of REM's bulk form and pharmaceutical injection.

Synthesis, spectroscopic, and computational studies on molecular charge-transfer complex of 2-((2-hydroxybenzylidene) amino)-2-(hydroxymethyl) propane-1, 3-diol with chloranilic acid: Potential antiviral activity simulation of CT-complex against SARS-CoV-2.

An innovative charge-transfer complex between the Schiff base 2-((2-hydroxybenzylidene) amino)-2-(hydroxymethyl) propane-1,3-diol [SAL-THAM] and the π-acceptor, chloranilic acid (CLA) within the mole ratio (1:1) was synthesized and characterized aiming to investigate its electronic transition spectra in acetonitrile (ACN), methanol (MeOH) and ethanol (EtOH) solutions. Applying Job`s method in the three solvents supported the 1:1 (CLA: SAL-THAM) mole ratio complex formation. The formation of stable CT- complex was shown by the highest values of charge-transfer complex formation constants, KCT, calculated using minimum-maximum absorbance method, with the sequence, acetonitrile > ethanol > methanol DFT study on the synthesized CT complex was applied based on the B3LYP method to evaluate the optimized structure and extract geometrical and reactivity parameters. Based on TD-DFT theory, the electronic properties, 1H and 13C NMR, IR, and UV-Vis spectra of the studied system in different solvents showing good agreement with the experimental studies. MEP map described the possibility of hydrogen bonding and charge transfer in the studied system. Finally, a computational approach for screening the antiviral activity of CT - complex towards SARS-CoV-2 coronavirus protease via molecular docking simulation was conducted and confirmed with molecular dynamic (MD) simulation.

Thermodynamic and Computational (DFT) Study of Non-Covalent Interaction Mechanisms of Charge Transfer Complex of Linagliptin with 2,3-Dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and Chloranilic acid (CHA).

This study describes the non-covalent interactions of the charge transfer complex (CT), which was responsible for the synthesis of Linagliptin (LNG) with 2,3-Dichloro-5,6-Dicyano-1,4-benzoquinone (DDQ), or with Chloranilic acid (CHA) complexes in acetonitrile (MeCN) at temperatures of (25 ± 2 °C). Then, a UV-Vis spectrophotometer was utilized to identify Linagliptin (LNG) from these complexes. For the quantitative measurement of Linagliptin in bulk form, UV-Vis techniques have been developed and validated in accordance with ICH criteria for several aspects, including selectivity, linearity, accuracy, precision, LOD, LOQ, and robustness. The optimization of the complex synthesis was based on solvent polarization; the ratio of molecules in complexes; the association constant; and Gibbs energy (ΔG°). The experimental work is supported by the computational investigation of the complexes utilizing density functional theory as well as (QTAIM); (NCI) index; and (RDG). According to the optimized conditions, Beer's law was observed between 2.5-100 and 5-100 µM with correlation coefficients of 1.9997 and 1.9998 for LGN-DDQ and LGN-CHA complexes, respectively. For LGN-DDQ and LGN-CHA complexes, the LOD and LOQ were (1.0844 and 1.4406 µM) and (3.2861 and 4.3655 µM), respectively. The approach was successfully used to measure LGN in its bulk form with high precision and accuracy.

A Hierarchical (Macro)molecular Assembly Assisted by Donor-Acceptor Charge-Transfer Interactions Exhibiting Room-Temperature Ferroelectricity.

This communication reveals co-assembly of an electron-deficient naphthalene-diimide (NDI)-appended polyurethane (P1) and electron-rich pyrene (Py), forming an organogel with prominent room-temperature ferroelectricity. In a non-polar medium, intra-chain hydrogen-bonding among the urethane groups of P1 produces a folded structure with an array of the NDIs in the periphery, which intercalate Py by charge-transfer (CT)-interaction. Such CT-complexation enables slow crystallization of the peripheral hydrocarbons, causing gelation with nanotubular morphology, in which the wall consists of the alternating NDI-Py stack. Such D-A assembly exhibits ferroelectricity (saturation polarization Ps ≈0.8 µC cm-2 and coercive field Ec ≈8 kV cm-1 at 500 V and 10 Hz frequency) with Curie temperature (Tc ) of ≈350 K, which can be related to the disassembly of the CT-complex. In the absence of Py, P1 forms spherical aggregates, showing dielectric behaviour.

Ethylenediamine-bound magnetite nanoparticles as dual function colorimetric sensor having charge transfer and nanozyme activity for TNT and tetryl detection.

A reusable, low-cost, and convenient ethylenediamine (EDA)-bound magnetite nanoparticles (MNPs)-based colorimetric sensor has been developed for dual function colorimetric determination of nitroaromatic explosives such as TNT and tetryl. Colorimetric detection of analytes may occur through two independent routes: (1) nano-Fe3O4- EDA- NH2 as σ-donor may interact with the σ- and π-acceptor aromatic-poly(NO2) groups to produce a colored charge-transfer (CT) complex; (2) nano-Fe3O4-EDA-NH2 as a Fenton-type nanozyme may generate reactive species that comprise hydroxyl radicals (•OH) with H2O2 to oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to a blue-colored diimine (oxTMB-TMB) CT complex, where this color is bleached with TNT/tetryl because of donor-acceptor interactions between the explosive -NO2 groups and the -NH2 group of Fe3O4-EDA nanoparticles of restricted nanozyme activity. Both methods can quantify TNT well below the EPA recommended TNT residential screening level in soil, LOD being in the micromolar range. As EDA was covalently bound to MNPs, the same sensor can be separately reused six times for TNT and eight times for tetryl determination, using method (1). Common metal ions, anions, energetic materials, several camouflage materials, and soil components such as humates did not interfere with the nanosensor performance for TNT and tetryl. The combination of charge-transfer and nanozyme ability of Fe3O4- EDA-NH2 nanoparticles may bring a new approach to dual function colorimetric sensor design. To the best of our knowledge, this is the first dual function colorimetric sensor for TNT and tetryl using the same nanoparticles as sensing elements in two different detection systems involving either formation or bleaching of colored species. The proposed colorimetric sensor can determine nitroaromatic explosives in two different ways: method-1 for TNT and tetryl sensing with EDA-MNPs relies on the donor-acceptor interaction between the electron-deficient nitroaromatics and electron-rich amine groups covalently functionalized on MNPs to produce an absorbance at 512 nm. In method-2, EDA-MNPs having nanozyme activity react with H2O2 to form reactive species that can oxidize TMB to its blue-colored charge-transfer (CT) complex, where TNT and tetryl addition may partially inhibit the nanozyme activity of EDA-MNPs and cause color bleaching (decrement of 650 nm absorbance) by disrupting the CT complex formed from TMB. This is the first dual function colorimetric sensor for nitro explosives uniquely combining charge-transfer and nanozyme ability of EDA-Fe3O4 nanoparticles in the same nano-sensor.

Charge Transfer Complexes of Ketotifen with 2,3-Dichloro-5,6-dicyano-p-benzoquinone and 7,7,8,8-Tetracyanoquodimethane: Spectroscopic Characterization Studies.

The reactions of ketotifen fumarate (KT) with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as π acceptors to form charge transfer (CT) complexes were evaluated in this study. Experimental and theoretical approaches, including density function theory (DFT), were used to obtain the comprehensive, reliable, and accurate structure elucidation of the developed CT complexes. The CT complexes (KT-DDQ and KT-TCNQ) were monitored at 485 and 843 nm, respectively, and the calibration curve ranged from 10 to 100 ppm for KT-DDQ and 2.5 to 40 ppm for KT-TCNQ. The spectrophotometric methods were validated for the determination of KT, and the stability of the CT complexes was assessed by studying the corresponding spectroscopic physical parameters. The molar ratio of KT:DDQ and KT:TCNQ was estimated at 1:1 using Job's method, which was compatible with the results obtained using the Benesi-Hildebrand equation. Using these complexes, the quantitative determination of KT in its dosage form was successful.

New Charge Transfer Complexes of K+-Channel-Blocker Drug (Amifampridine; AMFP) for Sensitive Detection; Solution Investigations and DFT Studies.

UV-Vis spectroscopy was used to investigate two new charge transfer (CT) complexes formed between the K+-channel-blocker amifampridine (AMFP) drug and the two π-acceptors 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and tetracyanoethylene (TCNE) in different solvents. The molecular composition of the new CT complexes was estimated using the continuous variations method and found to be 1:1 for both complexes. The formed CT complexes' electronic spectra data were further employed for calculating the formation constants (KCT), molar extinction coefficients (εCT), and physical parameters at various temperatures, and the results demonstrated the high stability of both complexes. In addition, sensitive spectrophotometric methods for quantifying AMFP in its pure form were proposed and statistically validated. Furthermore, DFT calculations were used to predict the molecular structures of AMFP-DDQ and AMFP-TCNE complexes in CHCl3. TD-DFT calculations were also used to predict the electronic spectra of both complexes. A CT-based transition band (exp. 399 and 417 nm) for the AMFP-TCNE complex was calculated at 411.5 nm (f = 0.105, HOMO-1 → LUMO). The two absorption bands at 459 nm (calc. 426.9 nm, f = 0.054) and 584 nm (calc. 628.1 nm, f = 0.111) of the AMFP-DDQ complex were theoretically assigned to HOMO-1 → LUMO and HOMO → LUMO excitations, respectively.

Charge Transfer Complexes of 1,3,6-Trinitro-9,10-phenanthrenequinone with Polycyclic Aromatic Compounds.

Understanding the interactions of organic donor and acceptor molecules in binary associates is crucial for design and control of their functions. Herein, we carried out a theoretical study on the properties of charge transfer complexes of 1,3,6-trinitro-9,10-phenanthrenequinone (PQ) with 23 aromatic π-electron donors. Density functional theory (DFT) was employed to obtain geometries, frontier orbital energy levels and amounts of charge transfer in the ground and first excited states. For the most effective donors, namely, dibenzotetrathiafulvalene, pentacene, tetrathiafulvalene, 5,10-dimethylphenazine, and tetramethyl-p-phenylenediamine, the amount of charge transfer in the ground state was shown to be 0.134-0.240 e-. Further, a novel charge transfer complex of PQ with anthracene was isolated in crystalline form and its molecular and crystal structure elucidated by single-crystal synchrotron X-ray diffraction.

Charge-transfer complex-based spectrophotometric method for the determination of mesotrione in environmental samples.

A simple, accurate, sensitive, and selective spectrophotometric method has been developed for the determination of mesotrione. This method is based on the reaction of mesotrione with Fe(III) to form a charge transfer metal complex having λmax at 348 nm. Beer's law was obeyed in the concentration range of 0.2-10.0 µg mL-1 with limit of detection (LOD) and limit of quantification (LOQ) equal to 0.053 and 0.162 µg mL-1, respectively. The percent recovery of mesotrione from different environmental and agricultural samples was found to be 95.00-106.50% at various levels. Notably, the developed method was successfully employed for the determination of mesotrione in environmental (pond water, canal water, tap water, and soil) and agricultural (maize grains) samples.

Solar and Visible Light Assisted Peptide Coupling.

Amino acid and peptide couplings are widely used in fields related to pharma and materials. Still, current peptide synthesis continues to rely on the use of expensive, water sensitive, and waste-generating coupling reagents, which are often prepared in multi-step sequences and used in excess. Herein is described a peptide coupling reaction design that relies mechanistically on sun-light activation of a 4-dimethylamino-pyridine-alkyl halide charge-transfer complex to generate a novel coupling reagent in situ. The resulting coupling method is rapid, does not require dry solvents or inert atmosphere, and is compatible with all the most common amino acids and protecting groups. Peptide couplings can be run on gram-scale, without the use of special equipment. This method has a significantly reduced environmental and financial footprint compared to standard peptide coupling reactions. Experimental and computational studies support the proposed mechanism.

Probing the Electrostatic Barrier of Tetrathiafulvalene Dications using a Tetra-stable Donor-Acceptor [2]Rotaxane.

A tetra-stable donor-acceptor [2]rotaxane 1⋅4PF6 has been synthesized. The dumbbell component is comprised of an oxyphenylene (OP), a tetrathiafulvalene (TTF), a monopyrrolo-TTF (MPTTF), and a hydroquinone (HQ) unit, which can act as recognition sites (stations) for the tetra-cationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT4+ ). The TTF and the MPTTF stations are located in the middle of the dumbbell component and are connected by a triethylene glycol (TEG) chain in such a way that the pyrrole moiety of the MPTTF station points toward the TTF station, while the TTF and MPTTF stations are flanked by the OP and HQ stations on their left hand side and right hand side, respectively. The [2]rotaxane was characterized in solution by 1 H NMR spectroscopy and cyclic voltammetry. The spectroscopic data revealed that the majority (77 %) of the tetra-stable [2]rotaxane 14+ exist as the translational isomer 1⋅MPTTF4+ in which the CBPQT4+ ring encircles the MPTTF station. The electrochemical studies showed that CBPQT4+ in 1⋅MPTTF4+ undergoes ring translation as result of electrostatic repulsion from the oxidized MPTTF unit. Following tetra-oxidation of 1⋅MPTTF4+ , a high-energy state of 18+ was obtained (i.e., 1⋅TEG8+ ) in which the CBPQT4+ ring was located on the TEG linker connecting the di-oxidized TTF2+ and MPTTF2+ units. 1 H NMR spectroscopy carried out in CD3 CN at 298 K on a chemically oxidized sample of 1⋅MPTTF4+ revealed that the metastable state 1⋅TEG8+ is only short-lived with a lifetime of a few minutes and it was found that 70 % of the positively charged CBPQT4+ ring moved from 1⋅TEG8+ to the HQ station, while 30 % moved to the much weaker OP station. These results clearly demonstrate that the CBPQT4+ ring can cross both an MPTTF2+ and a TTF2+ electrostatic barrier and that the free energy of activation required to cross MPTTF2+ is ca. 0.5 kcal mol-1 smaller as compared to TTF2+ .

Validated spectrophotometric determination of maduramicin ammonium using three charge transfer complexation reactions.

Direct spectrophotometric determination of Maduramicin ammonium (MAD) represents an analytical challenge since it is a weak UV-absorbing and lacking a strong chromophore. This work represents the first spectrophotometric determination of MAD as no direct spectrophotometric or colorimetric determination methods for MAD are available in the literature. The present study illustrates the development of three simple, rapid and inexpensive colorimetric methods for the routine quality control analysis of MAD based on the formation of colored charge transfer complexes with three electron acceptors namely p-chloranilic acid (p-CA), 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and picric acid (PA). The color products of MAD with p-CA, DDQ and PA were measured at 519, 588 and 405nm respectively. The proposed methods were validated in terms of linearity, ranges, precision, accuracy, robustness and limits of detection and quantification. MAD was effectively determined over concentration ranges of 100-1000, 25-250 and 30-150µg/mL using p-CA, DDQ and PA, respectively with good linearity as shown by the values of correlation coefficients not less than 0.9991. The developed methods were successfully implemented in the assay of MAD powder pharmaceutical formulation for veterinary use.

Triphenylene-Derived Electron Acceptors and Donors on Ag(111): Formation of Intermolecular Charge-Transfer Complexes with Common Unoccupied Molecular States.

Over the past years, ultrathin films consisting of electron donating and accepting molecules have attracted increasing attention due to their potential usage in optoelectronic devices. Key parameters for understanding and tuning their performance are intermolecular and molecule-substrate interactions. Here, the formation of a monolayer thick blend of triphenylene-based organic donor and acceptor molecules from 2,3,6,7,10,11-hexamethoxytriphenylene (HAT) and 1,4,5,8,9,12-hexaazatriphenylenehexacarbonitrile (HATCN), respectively, on a silver (111) surface is reported. Scanning tunneling microscopy and spectroscopy, valence and core level photoelectron spectroscopy, as well as low-energy electron diffraction measurements are used, complemented by density functional theory calculations, to investigate both the electronic and structural properties of the homomolecular as well as the intermixed layers. The donor molecules are weakly interacting with the Ag(111) surface, while the acceptor molecules show a strong interaction with the substrate leading to charge transfer and substantial buckling of the top silver layer and of the adsorbates. Upon mixing acceptor and donor molecules, strong hybridization occurs between the two different molecules leading to the emergence of a common unoccupied molecular orbital located at both the donor and acceptor molecules. The donor acceptor blend studied here is, therefore, a compelling candidate for organic electronics based on self-assembled charge-transfer complexes.