Synthesis and Investigation of Biological Activity of New Betulonic Acid Derivatives Containing 1,2,3-Triazole Fragments.

The results of this study showed that the compounds synthesized by the authors have significant potential due to their antibacterial and cytotoxic properties. The apparent antibacterial activity demonstrated by the compounds suggests that they are active antimicrobial agents against common microbial pathogens that cause various socially significant infectious diseases. Compound 6 showed pronounced antimicrobial activity against the Gram-positive test strain Staphylococcus aureus ATCC 6538, and compound 7 demonstrated pronounced antimicrobial activity against the Gram-negative test strain Escherichia coli ATCC 25922 (MIC = 6.3 µg/mL). This allowed us to consider these compounds to have great potential.

Facet-dependent transformation and toxicity of nanoscale zinc oxide in the synthetic saliva.

The nanoscale zinc oxide (n-ZnO) was used in food packages due to its superior antibacterial activity, resulting in potential intake of n-ZnO through the digestive system, wherein n-ZnO interacted with saliva. In recent, facet engineering, a technique for controlling the exposed facets, was applied to n-ZnO, whereas risk of n-ZnO with specific exposed facets in saliva was ignored. ZnO nanoflakes (ZnO-0001) and nanoneedles (ZnO-1010) with the primary exposed facets of {0001} and {1010} respectively were prepared in this study, investigating stability and toxicity of ZnO-0001 and ZnO-1010 in synthetic saliva. Both ZnO-0001 and ZnO-1010 partially transformed into amorphous Zn3(PO4)2 within 1 hr in the saliva even containing orgnaic components, forming a ZnO-Zn3(PO4)2 core-shell structure. Nevertheless, ZnO-1010 relative to ZnO-0001 would likely transform into Zn3(PO4)2, being attributed to superior dissolution of {1010} facet due to its lower vacancy formation energy (1.15 eV) than {0001} facet (3.90 eV). The toxicity of n-ZnO to Caco-2 cells was also dependent on the primary exposed facet; ZnO-0001 caused cell toxicity through oxidative stress, whereas ZnO-1010 resulted in lower cells viability than ZnO-0001 through oxidative stress and membrane damage. Density functional theory calculations illustrated that ·O2- was formed and released on {1010} facet, yet O22- instead of ·O2- was generated on {0001} facet, leading to low oxidative stress from ZnO-0001. All findings demonstrated that stability and toxicity of n-ZnO were dependent on the primary exposed facet, improving our understanding of health risk of nanomaterials.

Chemically Transformed Ag2 Te Nanowires on Polyvinylidene Fluoride Membrane For Flexible Thermoelectric Applications.

Flexible thermoelectric devices of nanomaterials have shown a great potential for applications in wearable to remotely located electronics with desired shapes and geometries. Continuous powering up the low power flexible electronics is a major challenge. We are reporting a flexible thermoelectric module prepared from silver telluride (Ag2 Te) nanowires (NWs), which are chemically transformed from uniquely synthesized and scalable tellurium (Te) NWs. Conducting Ag2 Te NWs composites have shown an ultralow total thermal conductivity ~0.22 W/mK surpassing the bulk melt-grown Ag2 Te ~1.23 W/mK at ~300 K, which is attributed to the nanostructuring of the material. Flexible thermoelectric device consisting of 4 legs (n-type) of Ag2 Te NWs on polyvinylidene fluoride membrane displays a significant output voltage (Voc ) ~2.3 mV upon human touch and Voc ~18 mV at temperature gradient, ΔT ~50 K, which shows the importance of NWs based flexible thermoelectric devices to power up the low power wearable electronics.

Water-Triggered Chemical Transformation of Perovskite Nanocrystals.

Recently emerged lead-halide perovskite nanocrystals (PNCs) are promising optoelectronic material due to their easy solution processability, wide range of color tunability, as well as very high photoluminescence quantum yield. Despite their significant success in lab-scale optoelectronic applications, the long-term stability becomes the main issue, hindering them towards commercialization. The highly ionic nature of such lead-halide structure makes them extremely unstable in water and air. But a very few groups have taken the advantage of such nature of the crystal structure for water-triggered chemical transformation towards shape, composition, and morphology controlled stable and bright PNCs, which are otherwise difficult to obtain by typical direct approach. Furthermore, using polymer as an encapsulating layer for the PNCs, water-soluble stable PNCs have been prepared. In this review, the recent progress on the water-hexane interface chemistry towards chemical transformation to produce several PNCs is described. Such method not only ensure to yield several shape-controlled perovskites nanocrystals, but also formation of perovskites in aqueous phase that show promising application towards bio-imaging.

seco-Sesquiterpenes and acorane-type sesquiterpenes with antiviral activity from the twigs and leaves of Illicium henryi Diels.

Chemical investigation of an alcohol extract from the twigs and leaves of Illicium henryi Diels resulted in the isolation of two new acorane-related seco-sesquiterpenes (1 and 3), two new acorane-related seco-norsesquiterpenes (2 and 4), one new 2-epi-cedrane sesquiterpene (5), eight new acorane-type sesquiterpenes (6-13), and a known major constituent of acorenone B (14). Their structures were established by interpreting extensive spectroscopic data, including HRESIMS, NMR (1H and 13C NMR, 1H-1H COSY, HSQC, and HMBC), and NOE difference spectra analysis. The absolute configurations of 1, 2, 4-7, 9, 10, and 14 were determined by X-ray crystallography, while chemical transformation methods were performed with compound 14 as the starting material to elegantly solve the absolute configuration issue of compounds 8 and 11-13. Notably, 1 and 2 are seco-sesquiterpenes that are related to acorane and possess an unusual ketal-linked hemiacetal in a 6,8-dioxabicyclo[3.2.1]octan-7-ol scaffold ring system. Plausible biosynthetic pathways for compounds 1-14, which were derived from the acorane skeleton, were proposed. All the isolated compounds (1-14) were evaluated for their antiviral and cytotoxic activities.

Arylcyanomethylenequinone Oximes: An Overview of Synthesis, Chemical Transformations, and Biological Activity.

Quinone methides are a class of biologically active compounds that can be used in medicine as antibacterial, antifungal, antiviral, antioxidant, and anti-inflammatory agents. In addition, quinone methides have the potential to be used as pesticides, dyes, and additives for rubber and plastics. In this paper, we discuss a subclass of quinone methides: methylenequinone oximes. Although the first representatives of the subgroup were synthesized in the distant past, they still need to be additionally studied, while their chemistry, biological properties, and perspective of practical applications require to be comprehensively summarised. Based on the analysis of the literature, it can be concluded that methylenequinone oximes exhibit a diversified profile of properties and outstanding potential as new drug candidates and reagents in organic synthesis, both of electrophilic and nucleophilic nature, worthy of wide-ranging further research.

Novel Vulgarin Derivatives: Chemical Transformation, In Silico and In Vitro Studies.

Vulgarin, an eudesmanolide sesquiterpene isolated from Artemisia judaica, was refluxed with iodine to produce two derivatives (1 and 2), which were purified and spectroscopically identified as naproxen methyl ester analogs. The reaction mechanism by which 1 and 2 were formed is explained using a sigmatropic reaction with a 1,3 shift. The scaffold hopping via lactone ring opening enabled the new derivatives of vulgarin (1 and 2) to fit well inside the COX-2 active site with ΔG of -7.73 and -7.58 kcal/mol, respectively, which was better than that of naproxen (ΔG of -7.04 kcal/mol). Moreover, molecular dynamic simulations showed that 1 was able to achieve a faster steady-state equilibrium than naproxen. The novel derivative 1 showed promising cytotoxic activities against HepG-2, HCT-116, MCF-7, and A-549 cancer cell lines compared to those of vulgarin and naproxen.

Methods of Analysis and Identification of Betulin and Its Derivatives.

This scientific work presents practical and theoretical material on the methods of analysis and identification of betulin and its key derivatives. The properties of betulin and its derivatives, which are determined by the structural features of this class of compounds and their tendency to form dimers, polymorphism and isomerization, are considered. This article outlines ways to improve not only the bioavailability but also the solubility of triterpenoids, as well as any hydrophobic drug substances, through chemical transformations by introducing various functional groups, such as carboxyl, hydroxyl, amino, phosphate/phosphonate and carbonyl. The authors of this article summarized the physicochemical characteristics of betulin and its compounds, systematized the literature data on IR and NMR spectroscopy and gave the melting temperatures of key acids and aldehydes based on betulin.

[Nature-effect transformation mechanism of mulberry leaves and silkworm droppings based on chemical composition analysis].

Starting with the relationship between mulberry leaves and silkworm droppings as food and metabolites, this study systematically compared the chemical components, screened out differential components, and quantitatively analyzed the main differential components based on ultra-high performance liquid chromatography with quadrupole time-of-flight mass spectrometry(UPLC-Q-TOF-MS) and UPLC-Q-TRAP-MS combined with principal component analysis(PCA) and orthogonal partial least squares-discriminant analysis(OPLS-DA). Moreover, the in vitro enzymatic transformation of the representative differential components was studied. The results showed that(1) 95 components were identified from mulberry leaves and silkworm droppings, among which 27 components only exist in mulberry leaves and 8 components in silkworm droppings. The main differential components were flavonoid glycosides and chlorogenic acids.(2) Nineteen components with significant difference were quantitatively analyzed, and the components with significant differences and high content were neochlorogenic acid, chlorogenic acid, and rutin.(3) The crude protease in the mid-gut of silkworm significantly metabolized neochlorogenic acid and chlorogenic acid, which may be an important reason for the efficacy change in mulberry leaves and silkworm droppings. This study lays a scientific foundation for the development, utilization, and quality control of mulberry leaves and silkworm droppings. It provides references for clarifying the possible material basis and mechanism of the pungent-cool and dispersing nature of mulberry leaves transforming into the pungent-warm and dampness-resolving nature of silkworm droppings, and offers a new idea for the study of nature-effect transformation mechanism of traditional Chinese medicine.

pH-Dependent Chemical Transformations of Humic-Like Substances and Further Cognitions Revealed by Optical Methods.

Humic-like substances (HULIS) are macromolecular complex groups in water-soluble organic compounds (WSOC). pH is a crucial factor that influences the chemical transformations of HULIS in atmospheric particles, but this has been rarely investigated, especially under varying pH conditions. This study attempted to unveil the chemical transformation mechanisms of HULIS under a range of pH conditions using optical methods. The pH-dependent light absorption and fluorescence properties of HULIS were comprehensively analyzed; the acidity coefficient (pKa) of HULIS in relation to chemical structures was determined, and the hypothetical chemical transformation mechanisms of HULIS with increasing pH were analyzed by optical characterizations. The results suggested that pH greatly impacted the light absorption and fluorescence efficiencies of HULIS in both winter and summer seasons, and pKa was an important inflection point. The pKa of HULIS ranged from 3.5 to 8.0 in winter and 6.4 to 10.0 in summer. The acidic/basic groups were identified as -OH or -NH2 substituted quinolines, carboxylic aromatics, and pyridines. The pH-sensitive species accounted for about 6% and 21% of HULIS-C (carbon concentrations of HULIS) in winter and summer, respectively. The varying optical spectra with increasing pH might result from charge transfer or complex reactions with HULIS deprotonation.

Scopariusicides D-M, ent-clerodane-based isomeric meroditerpenoids with a cyclobutane-fused γ/δ-lactone core from Isodon scoparius.

Scopariusicides D-M (1-10), ten new ent-clerodane-based meroditerpenoids with a cyclobutane-fused γ/δ-lactone core, were isolated from Isodon scoparius. Their structures were determined by comprehensive analysis of spectroscopic data, single-crystal X-ray diffraction, chemical transformation, and TDDFT ECD calculation. A plausible biosynthetic pathway of 1-10 was proposed in which the asymmetrical cyclobutane ring was formed via a crossed "head-to-tail" intermolecular [2 + 2] cycloaddition in anti/syn facial approaches between an ent-clerodane lactone and a cis-4-hydroxycinnamic acid. Bioactivity evaluation manifested that 5 exhibited significant neuroprotective effect against corticosterone-induced injury in PC12 cells, while 6 and 7 exhibited moderate immunosuppressive activity against human T cell proliferation stimulated by anti-CD3/anti-CD28 mAb.

Approaches to Configuration Determinations of Flexible Marine Natural Products: Advances and Prospects.

Flexible marine natural products (MNPs), such as eribulin and bryostatin, play an important role in the development of modern marine drugs. However, due to the multiple chiral centers and geometrical uncertainty of flexible systems, configuration determinations of flexible MNPs face great challenges, which, in turn, have led to obstacles in druggability research. To resolve this issue, the comprehensive use of multiple methods is necessary. Additionally, configuration assignment methods, such as X-ray single-crystal diffraction (crystalline derivatives, crystallization chaperones, and crystalline sponges), NMR-based methods (JBCA and Mosher's method), circular dichroism-based methods (ECCD and ICD), quantum computational chemistry-based methods (NMR calculations, ECD calculations, and VCD calculations), and chemical transformation-based methods should be summarized. This paper reviews the basic principles, characteristics, and applicability of the methods mentioned above as well as application examples to broaden the research and applications of these methods and to provide a reference for the configuration determinations of flexible MNPs.

Effect of polar/non-polar facets on the transformation of nanoscale ZnO in simulated sweat and potential impacts on the antibacterial activity.

The use of nanoscale zinc oxide (n-ZnO) in the personal care products would cause interactions between n-ZnO and human sweat. Facet engineering has been applied to n-ZnO to improve its activity. Nevertheless, it is not clear whether the exposed facet would affect transformation of n-ZnO in sweat. Herein, we prepared ZnO nanoneedles with the dominant (1010) non-polar facet (i.e., ZnO-1010) and ZnO nanoflakes with the dominant (0001) polar facet (i.e., ZnO-0001), respectively. We found that n-ZnO can undergo chemical transformation in the simulated sweat within 168 h or 24 h, transforming into amorphous materials and Zn3(PO4)20.4 H2O and/or Na(ZnPO4)·H2O. Given the rate constant (e.g., 0.093 h-1 for ZnO-0001 vs. 0.033 h-1 for ZnO-1010) of ZnO depletion and components of the precipitate from the simulated sweat, nevertheless, the transformation is highly dependent on the dominant exposed facet of n-ZnO. The ZnO-0001 relative to ZnO-1010 would likely undergo chemical transformation, demonstrating that the (0001) polar facet compared to (1010) non-polar facet had a superior activity to the dihydrogen phosphate anions in the simulated sweat, which is supported by density functional theory calculations. The chemical transformation can affect the antibacterial activity of n-ZnO to E. coli, moderating the toxicity due to a great decrease in the concentration of the dissolved zinc. In total, our findings provided insights into the facet-dependent transformation for n-ZnO in the simulated sweat, improving our understanding of potential risk of n-ZnO.

Fungal Epithiodiketopiperazines Carrying α,ß-Polysulfide Bridges from Penicillium steckii YE, and Their Chemical Interconversion.

Some fungal epithiodiketopiperazine alkaloids display α,ß-polysulfide bridges alongside diverse structural variations. However, the logic of their chemical diversity has rarely been explored. Here, we report the identification of three new (2, 3, 8) and five known (1, 4-7) epithiodiketopiperazines of this subtype from a marine-derived Penicillium sp. The structure elucidation was supported by multiple spectroscopic analyses. Importantly, we observed multiple nonenzymatic interconversions of these analogues in aqueous solutions and organic solvents. Furthermore, the same biosynthetic origin of these compounds was supported by one mined gene cluster. The dominant analogue (1) demonstrated selective cytotoxicity to androgen-sensitive prostate cancer cells and HIF-depleted colorectal cells and mild antiaging activities, linking the bioactivity to oxidative stress. These results provide crucial insight into the formation of fungal epithiodiketopiperazines through chemical interconversions.

Artificial Metalloenzymes: From Selective Chemical Transformations to Biochemical Applications.

Artificial metalloenzymes (ArMs) comprise a synthetic metal complex in a protein scaffold. ArMs display performances combining those of both homogeneous catalysts and biocatalysts. Specifically, ArMs selectively catalyze non-natural reactions and reactions inspired by nature in water under mild conditions. In the past few years, the construction of ArMs that possess a genetically incorporated unnatural amino acid and the directed evolution of ArMs have become of great interest in the field. Additionally, biochemical applications of ArMs have steadily increased, owing to the fact that compartmentalization within a protein scaffold allows the synthetic metal complex to remain functional in a sea of inactivating biomolecules. In this review, we present updates on: 1) the newly reported ArMs, according to their type of reaction, and 2) the unique biochemical applications of ArMs, including chemoenzymatic cascades and intracellular/in vivo catalysis. We believe that ArMs have great potential as catalysts for organic synthesis and as chemical biology tools for pharmaceutical applications.

Cordatols A-D, four new anti-inflammatory bis-monoterpenoids from Illigera cordata.

Cordatols A-D (1-4), four new limonene-derived bis-monoterpenoids plausibly biosynthesized via hetero-Diels-Alder cyclization and sequential hydrolyses of their monoterpene precursors, were isolated from the aerial parts of Illigera cordata. The structures, including absolute configuration, were established by spectroscopic analysis and further confirmed by a two-steps bioinspired chemical transformation. Moreover, compounds 1-4 exhibited moderate in vitro anti-inflammatory activity with IC50 values ranging from 17.5 to 24.6 µM. This study may provide a novel structural template for potential anti-inflammatory agent discovery.

Chemical transformation mediated CRISPR/Cas9 genome editing in Escherichia coli.

OBJECTIVES: To develop a convenient chemical transformation mediated CRISPR/Cas9 (CT-CRISPR/Cas9) system for genome editing in Escherichia coli. RESULTS: Here, we have constructed a CT-CRISPR/Cas9 system, which can precisely edit bacterial genome (replacing, deleting, inserting or point mutating a target gene) through chemical transformation. Compared with the traditional electroporation mediated CRISPR/Cas9 (ET-CRISPR/Cas9) system, genome editing with the CT-CRISPR/Cas9 system is much cheaper and simpler. In the CT-CRISPR/Cas9 system, we observed efficient genome editing on LB-agar plates. The CT-CRISPR/Cas9 system has successfully modified the target gene with the editing template flanked by short homologous DNA fragments (~ 50 bp) which were designed in primers. We used the lab-made CaCl2 solution to perform the CT-CRISPR/Cas9 experiment and successfully edited the genome of E. coli. Potential application of the CT-CRISPR/Cas9 system in high-throughput genome editing was evaluated in two E. coli strains by using a multiwell plate. CONCLUSIONS: Our work provides a simple and cheap genome-editing method, that is expected to be widely applied as a routine genetic engineering method.

Anion Exchange in II-VI Semiconducting Nanostructures via Atomic Templating.

Controlled chemical transformation of nanostructures is a promising technique to obtain precisely designed novel materials, which are difficult to synthesize otherwise. We report high-temperature vapor-phase anion-exchange reactions to chemically transform II-VI semiconductor nanostructures (100-300 nm length scale) while retaining the single crystallinity, crystal structure, morphology, and even defect distribution of the parent material via atomic templating. The concept of atomic templating is employed to obtain kinetically controlled, thermodynamically metastable structural phases such as zincblende CdSe and CdS from zincblende CdTe upon complete chemical replacement of Te with Se or S. The underlying transformation mechanisms are explained through first-principles density functional theory calculations. Atomic templating is a unique path to independently tune materials' phase and composition at the nanoscale, allowing the synthesis of novel materials.

Polymeric graphitic carbon nitride (g-C3N4)-based semiconducting nanostructured materials: Synthesis methods, properties and photocatalytic applications.

In recent years, various facile and low-cost methods have been developed for the synthesis of advanced nanostructured photocatalytic materials. These catalysts are required to mitigate the energy crisis, environmental deterioration, including water and air pollution. Among the various semiconductors explored, recently novel classes of polymeric graphitic carbon nitride (g-C3N4)-based heterogeneous photocatalysts have established much greater importance because of their unique physiochemical properties, large surface area, low price, and long service life, ease of synthesis, product scalability, controllable band gap properties, low toxicity, and high photocatalytic activity. The present comprehensive review focuses on recent achievements in a number of facile chemical synthesis methods for semiconducting polymeric carbon nitrides and their heterogeneous nanohybrids with various dopants, nanostructured metals, metal oxides, and nanocarbons, as well as the parameters influencing their physiochemical properties and photocatalytic efficiency, which are discussed with reference to various catalytic applications such as air (NOx) purification, wastewater treatment, hydrogen generation, CO2 reduction, and chemical transformation. The mechanisms for the superior photocatalytic activity of polymeric g-C3N4-based heterogeneous photocatalysts are also discussed. Finally, the challenges, prospects, and future directions for photocatalytic polymeric g-C3N4-based semiconducting materials are described.

Chemical Transformation of Colloidal Nanostructures with Morphological Preservation by Surface-Protection with Capping Ligands.

When nanocrystals are made to undergo chemical transformations, there are often accompanying large mechanical deformations and changes to overall particle morphology. These effects can constrain development of multistep synthetic methods through loss of well-defined particle morphology and functionality. Here, we demonstrate a surface protection strategy for solution phase chemical conversion of colloidal nanostructures that allows for preservation of overall particle morphology despite large volume changes. Specifically, via stabilization with strong coordinating capping ligands, we demonstrate the effectiveness of this method by transforming ß-FeOOH nanorods into magnetic Fe3O4 nanorods, which are known to be difficult to produce directly. The surface-protected conversion strategy is believed to represent a general self-templating method for nanocrystal synthesis, as confirmed by applying it to the chemical conversion of nanostructures of other morphologies (spheres, rods, cubes, and plates) and compositions (hydroxides, oxides, and metal organic frameworks).