Intraoperative artificial intelligence system identifying liver vessels in laparoscopic liver resection: a retrospective experimental study.

BACKGROUND: The precise recognition of liver vessels during liver parenchymal dissection is the crucial technique for laparoscopic liver resection (LLR). This retrospective feasibility study aimed to develop artificial intelligence (AI) models to recognize liver vessels in LLR, and to evaluate their accuracy and real-time performance. METHODS: Images from LLR videos were extracted, and the hepatic veins and Glissonean pedicles were labeled separately. Two AI models were developed to recognize liver vessels: the "2-class model" which recognized both hepatic veins and Glissonean pedicles as equivalent vessels and distinguished them from the background class, and the "3-class model" which recognized them all separately. The Feature Pyramid Network was used as a neural network architecture for both models in their semantic segmentation tasks. The models were evaluated using fivefold cross-validation tests, and the Dice coefficient (DC) was used as an evaluation metric. Ten gastroenterological surgeons also evaluated the models qualitatively through rubric. RESULTS: In total, 2421 frames from 48 video clips were extracted. The mean DC value of the 2-class model was 0.789, with a processing speed of 0.094 s. The mean DC values for the hepatic vein and the Glissonean pedicle in the 3-class model were 0.631 and 0.482, respectively. The average processing time for the 3-class model was 0.097 s. Qualitative evaluation by surgeons revealed that false-negative and false-positive ratings in the 2-class model averaged 4.40 and 3.46, respectively, on a five-point scale, while the false-negative, false-positive, and vessel differentiation ratings in the 3-class model averaged 4.36, 3.44, and 3.28, respectively, on a five-point scale. CONCLUSION: We successfully developed deep-learning models that recognize liver vessels in LLR with high accuracy and sufficient processing speed. These findings suggest the potential of a new real-time automated navigation system for LLR.

The Accuracy of Dental Implant Placement With Different Methods of Computer-Assisted Implant Surgery: A Network Meta-Analysis of Clinical Studies.

OBJECTIVE: Computer-assisted implant surgery (CAIS) has been introduced as a tool to aid in reaching a more accurate implant position. The aim of this network meta-analysis was to compare all the available CAIS techniques and obtain collective evidence on the method that offers the highest accuracy compared to freehand implant placement. MATERIALS AND METHODS: Database search was done in PubMed, Scopus, and Cochrane library in addition to extensive search in the gray literature and related systematic reviews, aiming to find clinical studies that compared any CAIS technique with another, or with freehand implant placement. The outcomes evaluated were angle, platform, and apex deviation. The search process ended on March 18, 2024. RESULTS: Thirty-three studies were included. All CAIS techniques (static with partial or full guidance, dynamic with partial or full guidance, the combination of static and dynamic CAIS) showed significantly less deviation than freehand implant placement, except for the static CAIS with guidance for the pilot drill only. The combination of static and dynamic CAIS ranked best among all other methods. Based on the GRADE system, the certainty of evidence in the outcomes of the meta-analysis was judged as low or moderate. CONCLUSIONS: The current study demonstrates that computer-assisted implant surgery provides significantly higher accuracy in implant placement, with the combination of static and dynamic CAIS being the most precise. Nevertheless, future studies are needed, considering the different types, locations, and extents of edentulism in the analyzed investigations, as well as the necessity of obtaining stronger evidence. TRIAL REGISTRATION: PROSPERIO number: CRD42023482030.

Effect of Storage Conditions and Time on the Dimensional Stability of 3D Printed Surgical Guides: An In Vitro Study.

PURPOSE: To evaluate the dimensional stability over time of additively manufactured surgical templates, fabricated by different resins, and stored by different methods. MATERIALS AND METHODS: Using a 3D printer with DLS technology and two different resins (Surgical Guide (SG)-WhipMix and Key Guide (KG)-KeystoneIndustries), 96 surgical guides were additively manufactured. The guides were stored in three different environments: directly exposed to sunlight (S1), in normal interior room conditions (S2), and in darkness (S3). The guides were digitally scanned immediately after fabrication and post-processing, and after 1, 3, and 6 months of storage. For each group, the mean deviation of the root mean square (RMS) between guide's intaglio surface, as well as the axial deviation between sleeves' housings were calculated. RESULTS: The mean axial variations of angular axis deviation of sleeves' housings ranged between 0.09° and 3.99°. The mean deviation of the RMS discrepancy in guide's intaglio ranged from 0.1 to 0.18 mm. Variations were significant (p < 0.001) only for the S1 group and only for SG material. After 3 months, an additional storage time of 3 months did not have any further effect on dimensional stability. CONCLUSIONS: Within the limitations of the present study, storage time of a surgical guide for up to 3 months after manufacturing, as well as printing material can significantly affect surgical guide's dimensional stability, when they are exposed to direct or indirect sunlight conditions. Storage of guides in a dark environment is recommended in order to avoid an additional source of error in computer-guided surgery workflows.

One-stage prosthodontically driven jaw reconstruction in patients with benign and malignant pathologies: A 7- to 11-year cohort study.

OBJECTIVES: One stage functional jaw reconstruction is defined as the resection and reconstruction of segmental defects in conjunction with the placement of dental implants in an ideal prosthetic position and loaded with a provisional restoration, during one surgical procedure. The aim of the study is to describe clinical outcomes of patients who underwent one stage functional jaw reconstruction. METHODS: Patients who underwent one-stage functional jaw reconstruction, from January 2013 to March 2016 were recalled in 2022 and 2023. Planning and execution for the reconstruction utilized either analogue or digital techniques. Outcome parameters recorded were treatment-related outcomes at patient level, implant-related outcomes and patient-reported outcome measures. RESULTS: Eighteen patients underwent one-stage jaw reconstruction with a total of 57 implants. Four patients had maxillary and 14 had mandibular reconstructions. Ten patients underwent postoperative radiotherapy. Ten patients were planned using analogue and eight by digital planning. Three patients had partial flap necrosis, three patients had plate fractures, implant loss was seen in one patient and four patients died during the period. A functional prosthesis was provided in 16 out of the 18 patients. CONCLUSION: One-stage functional jaw reconstruction is a predictable method for providing rehabilitation with successful outcomes at 7-11 years. However, caution should be exercised when the treatment modality is carried out in patients with malignant pathologies who have undergone radiotherapy.

Undifferentiated embryonal sarcoma of the liver in children: our experience in four difficult cases and three-dimensional practical exploration.

AIMS: To explore rare and difficult cases of undifferentiated embryonal sarcoma of the liver (UESL) in children in a single centre, summarize the diagnosis and treatment experience and analyse the role of a computer-assisted surgery system (Hisense CAS), thus providing a new global vision and three-dimensional perspective. METHODS: We retrospectively collected the clinical data including the diagnoses and treatment processes, of children with UESL confirmed by histopathological examination in our hospital from January 2009 to December 2020. The relationship between the tumour volume and important blood vessels and between the liver volume and tumour volume, as well as other three-dimensional characteristics in the reconstructed three-dimensional model were analysed using Hisense CAS. The findings from this analysis can be used to aid in surgical decision-making and preoperative planning. RESULTS: Four children-3 girls and 1 boy-with UESL were included in the study. The age at onset ranged from 6 to 8 years. All four children presented with symptoms of abdominal discomfort, and abdominal masses were detected during physical examination. Owing to the wishes of their parents and the possibility that the disease was benign, all four children underwent one-stage radical surgery. For patient 1, a three-dimensional reconstruction was created during the initial diagnosis, which made accurate evaluation and planning of the preoperative procedure challenging. In patient 2, the tumour was located in the middle lobe of the liver and involved the first and second hepatic hilum. For patient 3, the pathological diagnosis of the tumour after surgery was challenging, but eventually, the diagnosis was confirmed through histochemistry and consultation with higher-level hospitals. Patient 4 had a giant tumour, which had a preoperative simulated future liver remnant volume (FLV) that was 21.0% of the total volume of the liver and tumour (TLTV). According to the standard liver volume (SLV) for children, the FLV was 77.0% of the SLV, making surgery feasible. All four children underwent complete resection, and only patient 4 experienced recurrence below the diaphragm 19 months after surgery. Currently, the 3-year overall survival rate is 100%, and the 3-year event-free survival rate is 75%. CONCLUSION: UESL in children is rare, and the key to diagnosis and treatment is complete surgical resection. Through individualized three-dimensional surgical planning, accurate and complete resection of difficult and complex UESL in children can be achieved, leading to a favourable prognosis.

Acromioclavicular joint dislocation with loop double endobutton fixation assisted by orthopaedic surgery robot positioning system.

OBJECTIVE: Acute acromioclavicular (AC) joint dislocation is a common orthopedic injury that can significantly impair shoulder function and reduce quality of life. Effective treatment methods are essential to restore function and alleviate pain. To investigate the short-term clinical efficacy of the minimally invasive closed-loop double endobutton fixation assisted by orthopaedic surgery robot positioning system (TiRobot) in the treatment of AC joint dislocation, and to evaluate its feasibility and safety. METHODS: The clinical data of 19 patients with AC joint dislocation who underwent treatment with closed-loop double Endobutton fixation assisted by TiRobot between May 2020 and December 2022 were retrospectively analyzed. Visual Analog Scale (VAS) pain scores, the Constant Murley Score (CMS), and shoulder abduction range of motion were assessed and compared preoperatively and at the last follow-up. Computed tomography (CT) parameters of the acromioclavicular joint, including acromioclavicular distance (ACD), the distance between the upper and lower Endobutton (DED), the horizontal distance between the anterior edge of the distal clavicle and the anterior edge of the acromion (DACC), the diameter of the clavicular tunnel (DCT), and coracoid tunnel diameter (DC), were compared at 2 days, and 1 month after surgery, as well as at the last follow-up, along with the evaluation of intraoperative and postoperative complications. RESULTS: The postoperative VAS, CMS, and shoulder-abduction range of motion were significantly improved compared with the preoperative (all, P<0.05). The statistical analysis showed no significant difference in the CT image parameters of the acromioclavicular joint at 2 days and 1 month after surgery(all, P>0.05). Comparisons of DCT and DC revealed statistically significant differences between the last follow-up and 1 month after surgery (P<0.05), and no statistically significant difference was found in ACD, DED, and DACC(all, P>0.05). There were no complications such as infection or vascular or neurological damage, no cases of rostral or clavicle fractures, loss of reduction, heterotopic ossification, shoulder stiffness, and no loosening or breaking of internal fixations. CONCLUSION: Closed-loop double endobutton internal fixation assisted by TiRobot is an ideal method for the treatment of acute acromioclavicular (AC) joint dislocation. This method has the advantages of relatively simple operation, more accurate localization of bone tunnel during operation, less surgical trauma, and good recovery of shoulder function.

Accuracy of robotic arm-assisted versus computed tomography-based navigation in total hip arthroplasty using the direct anterior approach: a retrospective study.

BACKGROUND: A robotic arm-assisted and a computed tomography (CT)- based navigation system have been reported to improve the accuracy of component positioning in total hip arthroplasty (THA). However, no study has compared robotic arm-assisted THA (rTHA) to CT-based navigated THA (nTHA) concerning accuracy of cup placement and acetabular fractures using the direct anterior approach (DAA). This study aimed to compare the accuracy of cup placement and the presence of intraoperative acetabular fractures between rTHA and nTHA using DAA in the supine position. METHODS: We retrospectively investigated 209 hips of 188 patients who underwent rTHA or nTHA using DAA (rTHA using the Mako system: 85 hips of 79 patients; nTHA: 124 hips of 109 patients). After propensity score matching for age and sex, each group consisted of 73 hips. We evaluated clinical and radiographic outcomes, comparing postoperative cup orientation and position, measured using a three-dimensional templating software, to preoperative CT planning. Additionally, we investigated the prevalence of occult acetabular fracture. RESULTS: Clinical outcomes were not significantly different between the groups at 1 year postoperatively. The mean absolute error of cup orientation was significantly smaller in the rTHA group than in nTHA (inclination: 1.4° ± 1.2° vs. 2.7° ± 2.2°, respectively; p = 0.0001, anteversion: 1.5° ± 1.3° vs. 2.2° ± 1.7°, respectively; p = 0.007). The cases within an absolute error of 5 degrees in both RI and RA were significantly higher in the rTHA (97.3%) than in nTHA group (82.2%) (p = 0.003). The absolute error of the cup position was not significantly different between the two groups. The prevalence of occult acetabular fracture did not differ significantly between the two groups (rTHA: n = 0 [0%] vs. nTHA: n = 1 [1.4%]). CONCLUSION: Cup placement using DAA in the supine position in rTHA was more accurate with fewer outliers compared to nTHA. Therefore, rTHA performed via DAA in a supine position would be useful for accurate cup placement.

Mixed reality for spine surgery: a step into the future with a human cadaveric accuracy study.

OBJECTIVE: Current application of mixed reality as a navigation aid in the field of spinal navigation points to the potential of this technology in spine surgery. Crucial factors for acceptance include intuitive workflow, system stability, reliability, and accuracy of the method. The authors therefore aimed to investigate the accuracy of the system in visualization of anatomical structures using mixed reality in the example of pedicles of the thoracic spine in a human cadaveric study. Potential difficulties and limitations are discussed. METHODS: CT scans of a human cadaveric spinal column specimen were performed. After segmentation and import into the advanced HoloLens 2 software, the vertebrae were exposed. The vertebral arches were preserved on one side for a landmark-based surface registration, whereas pedicles were exposed on the other side in order to measure and evaluate deviation of the overlay holographs with regard to the exact anatomical structure. Accuracy was measured and statistically evaluated. RESULTS: In this work it was demonstrated that the overlay of the virtual 3D model pedicles with the real anatomical structures with anatomical landmark registration was within an acceptable surgical accuracy with the mean value of 2.1 mm (maximum 3.8 mm, minimum 1.2 mm). The highest accuracy was registered at the medial and lateral pedicle wall, and the measurement results were best in the region of the middle thoracic spine. CONCLUSIONS: The accuracy analysis for mixed reality (i.e., between the virtual and real anatomical situation of the thoracic spine) showed a very good agreement when focus was on the pedicles. This work is thus a rare proof of the precision of segmentation to the potential surgical area. The results encourage researchers to open up mixed reality technology in its development and application for spinal navigation.

Tibia-first, gap-balanced patient-specific alignment technique achieves well-balanced gaps in 90% of cases by rebuilding bony anatomy within boundaries.

PURPOSE: Patient-specific alignment (PSA) technique tries to achieve balanced gaps and simultaneously rebuild the individual bony phenotype. The hypothesis was: PSA technique achieves balanced knees in a high percentage with more anatomical resections than adjusted mechanical alignment (AMA). METHODS: Three hundred sixty-seven patients underwent navigated total knee arthroplasty (TKA) with a tibia-first gap-balanced PSA technique. Resection boundaries for medial proximal tibia angle (MPTA) of 86-92°, mechanical lateral distal femoral angle (mLDFA) of 86-92°, and hip-knee-ankle angle (HKA) of 175-185° were defined. Preoperative and intraoperative parameters of HKA, MPTA, mLDFA, and gap widths were recorded. Depending on the coronal deformity, the patients were divided into three groups: varus HKA < 178°; straight 178-182° and valgus HKA > 182°. The stability was analysed by assessing the difference between medial and lateral extension and flexion gaps as well as between flexion and extension gaps. All PSA measurements were compared with data from a previously published AMA series. RESULTS: PSA achieved balanced gaps in extension, flexion and between flexion/extension in over 90% of cases, being similar to AMA. In PSA, MPTA and mLDFA were restored within 1°, except in extreme varus (MPTA difference 2°) and valgus knees (mLDFA difference 3°). This was caused by the defined boundaries of the alignment technique. This individualised reconstruction led to significantly more anatomical resections of all tibia and femur resections. CONCLUSION: A tibia-first, gap-balanced PSA technique achieves balanced joints in more than 90% of cases. By maintaining preoperative MPTA and mLDFA to a high extent, far more anatomical resections, compared to AMA were performed. Future studies need to be conducted to investigate whether those promising intraoperative results correlate with postoperative patient outcomes and whether patients outside the 5° corridor have higher failure rates. LEVEL OF EVIDENCE: Level III, retrospective cohort study.

Comparative study on three-dimensional versus two-dimensional imaging using a computer-assisted surgery system for preoperative planning in pediatric middle hepatic tumors.

BACKGROUD: The study objective was to compare three-dimensional and two-dimensional imaging using computer-assisted systems (CASs) in clinical guidance for preoperative surgical planning for middle hepatic tumors in children. METHODS: A retrospective analysis was performed on 23 children who underwent surgery for middle hepatic tumors in our hospital from January 2016 to June 2022. The surgical resection plan was formulated by the operator team using two-dimensional CT images before the operation. Then, the same qualified surgeons conducted an in-depth analysis and formulated the surgical resection scheme for the same pediatric patient using three-dimensional imaging of the middle hepatic tumor. The feasibility of the two schemes was compared and analyzed. RESULT: All the tumors were successfully removed according to the preoperative method developed using three-dimensional imaging. The postoperative short-term follow-up revealed that all patients were doing well. Preoperative plans were revised in 9 cases after evaluating the three-dimensional images due to the disparity between the original plans and the three-dimensional relationship between the tumor and blood vessels, vascular variation, and the volume of remnant liver. CONCLUSIONS: Three-dimensional imaging with a computer-assisted surgery system is superior to two-dimensional imaging in the preoperative planning of pediatric hepatoblastoma.

Simultaneous standard total joint prosthesis reconstruction with SSRO and Le Fort I osteotomy in the treatment of unilateral temporomandibular joint ankylosis with jaw deformity: a case cohort study.

OBJECTIVE: Unilateral temporomandibular joint ankylosis with jaw deformity (UTMJAJD) may require simultaneous total joint prosthesis (TJP) reconstruction, sagittal split ramus (SSRO), and Le Fort I osteotomies. The purpose of this study was to evaluate outcomes in patients treated with these procedures. METHODS: Patients diagnosed UTMJAJD between 2016 and 2018 were selected for the study. Mandible-first procedure was performed after ankylosis release with TJP on the ankylosed side and SSRO on the contralateral side. Le Fort I osteotomy with and without genioplasty was lastly performed. Maximal incisor opening (MIO), facial symmetry, and jaw and condyle stability were compared before, after operation, and during follow-ups. RESULTS: Seven patients were included in the study. Their average chin deviation was 9.5 ± 4.2 mm, and maxillary cant was 5.1 ± 3.0°. After operation, jaw deformity significantly improved, with chin deviation corrected 7.6 ± 4.1 mm (p = 0.015) and advanced 5.9 ± 2.5 mm (p = 0.006). After an average follow-up of 26.6 ± 17.1 months, MIO significantly increased from 11.4 ± 9.3 to 35.7 ± 2.6 mm (p = 0.000). The occlusion was stable with no significant positional or rotational changes of the jaw (p > 0.05). There was no obvious condylar resorption during follow-ups. CONCLUSION: Simultaneous TJP reconstruction, SSRO, and Le Fort I osteotomy are reliable and effective methods for the treatment of UTMJAJD.

Mixed Reality Surgical Navigation System; Positional Accuracy Based on Food and Drug Administration Standard.

BACKGROUND: Computer assisted surgical navigation systems are designed to improve outcomes by providing clinicians with procedural guidance information. The use of new technologies, such as mixed reality, offers the potential for more intuitive, efficient, and accurate procedural guidance. The goal of this study is to assess the positional accuracy and consistency of a clinical mixed reality system that utilizes commercially available wireless head-mounted displays (HMDs), custom software, and localization instruments. METHODS: Independent teams using the second-generation Microsoft HoloLens© hardware, Medivis SurgicalAR© software, and localization instruments, tested the accuracy of the combined system at different institutions, times, and locations. The ASTM F2554-18 consensus standard for computer-assisted surgical systems, as recognized by the U.S. FDA, was utilized to measure the performance. 288 tests were performed. RESULTS: The system demonstrated consistent results, with an average accuracy performance that was better than one millimeter (.75 ± SD .37 mm). CONCLUSION: Independently acquired positional tracking accuracies exceed conventional in-market surgical navigation tracking systems and FDA standards. Importantly, the performance was achieved at two different institutions, using an international testing standard, and with a system that included a commercially available off-the-shelf wireless head mounted display and software.

A comparative cadaveric study for percutaneous scaphoid fixation: robotic vs freehand.

PURPOSES: To compare the robotic-assisted and the traditional freehand percutaneous scaphoid fixation in number of guidewire attempts, duration of fluoroscopy time, amount of radiation dose, and screw centrality. METHODS: Twenty cadaveric specimens were randomized into either the robotic or freehand group. The scaphoids in both groups were fixed by either the same attending or resident from our hand surgery department. The operation duration, amount of radiation from intraoperative fluoroscopy, total fluoroscopy time, and the number of guidewire attempts were documented and compared. Postoperatively, all the specimens had a computed tomography (CT) scan performed, and the difference in the final position of the screw and the central axis of the scaphoid was examined. RESULTS: In the robotic group, all the guide wires were satisfactorily positioned within a single attempt, while the median number of attempts in the traditional freehand group was 18 (quaternion 14-65). This also meant that the surgeon in the robotic group experienced significantly lower radiation exposure dose and time as compared to the freehand group. There were no significant differences in the final screw position as compared to the central axis of the scaphoid in both groups. Although there was no difference in surgeon performance in the robotic group, the operative time for the attending was significantly lower as compared to the resident in the freehand group. CONCLUSION: Robotic-assisted surgery for scaphoid fracture fixation is superior to the traditional freehand method as it facilitates accurate screw placement with lower radiation exposure and fewer guide wire attempts.

A novel imageless accelerometer-based navigation system improves acetabular cup placement accuracy during total hip arthroplasty in the lateral decubitus position.

INTRODUCTION: The accuracy of acetabular cup placement using conventional portable imageless navigation systems in total hip arthroplasty (THA) in the lateral decubitus position remains challenging. Several novel portable imageless navigation systems have been developed recently to improve cup placement accuracy in THA. This study compared the accuracy of acetabular cup placement using a conventional accelerometer-based portable navigation (c-APN) system and a novel accelerometer-based portable navigation (n-APN) system during THA in the lateral decubitus position. MATERIALS AND METHODS: This retrospective cohort study compared 45 THAs using the c-APN and 45 THAs using the n-APN system. The primary outcomes were the absolute errors between the intraoperative and postoperative values of acetabular cup radiographic inclination and anteversion angles and the percentage of cases with absolute errors within 5°. Intraoperative values were shown on navigation systems, and postoperative measurements were conducted using computed tomography images. RESULTS: The median absolute errors of the cup inclination angles were significantly smaller in the n-APN group than in the c-APN group (3.9° [interquartile range 2.2°-6.0°] versus 2.2° [interquartile range 1.0°-3.3°]; P = 0.002). Additionally, the median absolute errors of the cup anteversion angles were significantly smaller in the n-APN group than in the c-APN group (4.4° [interquartile range 2.4°-6.5°] versus 1.9° [interquartile range 0.8°-2.7°]; P < 0.001). Significant differences were observed in the percentage of cases with absolute errors within 5° of inclination (c-APN group 67% versus n-APN group 84%; P = 0.049) and anteversion angles (c-APN group 62% versus n-APN group 91%; P = 0.001). CONCLUSIONS: The n-APN system improved the accuracy of the cup placement compared to the c-APN system for THA in the lateral decubitus position.

Accelerometer-based portable navigation system shows no superior accuracy over pelvic alignment guide for acetabular cup placement in total hip arthroplasty in lateral decubitus position.

BACKGROUND: Total hip arthroplasty (THA) using a portable navigation system (PNS) incurs costs per procedure. However, it does not require a large console. This study aimed to compare the accuracy of acetabular cup placement using a pelvic alignment guide (PAG) attached to the pelvis and an accelerometer-based PNS in THA performed in the lateral decubitus position. METHODS: We retrospectively analyzed 100 hips that underwent primary THA in the lateral decubitus position between July 2018 and January 2021. The PAG was used in 50 hips, whereas the PNS was used in the other 50. Cup placement accuracy was measured using postoperative computed tomography scans, comparing errors in inclination and anteversion angles. The surgical time, blood loss, and complications were recorded. The follow-up period was at least 2 years in all cases. RESULTS: The mean absolute error of the inclination angle was similar between the groups (the PAG group: 3.7° ± 2.3° [range, 0.0-9.0]; the PNS group: 3.7° ± 2.3° [range, 0.2-10.5], p = 0.705). The mean absolute error of the anteversion angle was significantly smaller in the PAG group than in the PNS group (3.0° ± 2.4° [range, 0.0-9.7] vs. 6.5° ± 4.8° [range, 0.3-17.3], p < 0.001). The PAG group had a higher proportion of hips within 5° and 10° of the target angle (64 vs. 42%, P = 0.028, and 100 vs. 74%, p < 0.001, respectively). The PNS group had six hips with anteversion errors of 15° or more. Surgical time and blood loss were lower in the PAG group. The PNS group had one dislocation, whereas the PAG group did not. CONCLUSION: The accelerometer-based PNS did not demonstrate superior cup alignment accuracy compared to the PAG in THA performed in the lateral decubitus position. This finding informs surgeons that computer-assisted surgery is not necessarily superior to conventional THA using a PAG.

Augmented reality-guided pelvic osteotomy of Ganz: feasibility in cadavers.

INTRODUCTION: The periacetabular osteotomy is a technically demanding procedure with the goal to improve the osseous containment of the femoral head. The options for controlled execution of the osteotomies and verification of the acetabular reorientation are limited. With the assistance of augmented reality, new possibilities are emerging to guide this intervention. However, the scientific knowledge regarding AR navigation for PAO is sparse. METHODS: In this cadaveric study, we wanted to find out, if the execution of this complex procedure is feasible with AR guidance, quantify the accuracy of the execution of the three-dimensional plan, and find out what has to be done to proceed to real surgery. Therefore, an AR guidance for the PAO was developed and applied on 14 human hip cadavers. The guidance included performance of the four osteotomies and reorientation of the acetabular fragment. The osteotomy starting points, the orientation of the osteotomy planes, as well as the reorientation of the acetabular fragment were compared to the 3D planning. RESULTS: The mean 3D distance between planned and performed starting points was between 9 and 17 mm. The mean angle between planned and performed osteotomies was between 6° and 7°. The mean reorientation error between the planned and performed rotation of the acetabular fragment was between 2° and 11°. CONCLUSION: The planned correction can be achieved with promising accuracy and without serious errors. Further steps for a translation from the cadaver to the patient have been identified and must be addressed in future work.

Immediate implant placement in the posterior mandibular region was assisted by dynamic real-time navigation: a retrospective study.

BACKGROUND: Efficient utilization of residual bone volume and the prevention of inferior alveolar nerve injury are critical considerations in immediate implant placement (IIP) within the posterior mandibular region. Addressing these challenges, this study focuses on the clinical efficacy and implant accuracy of dynamic real-time navigation, an emerging technology designed to enhance precision in implantation procedures. METHODS: This study included 84 patients with 130 implants undergoing immediate placement in the posterior mandibular region. Stratified into dynamic navigation, static guide plate, and freehand implant groups, clinical indicators, including initial stability, distance to the inferior alveolar nerve canal, depth of implant placement, and various deviations, were systematically recorded. Statistical analysis, employing 1- or 2-way ANOVA and Student's t-test, allowed for a comprehensive evaluation of the efficacy of each technique. RESULTS: All 130 implants were successfully placed with an average torque of 22.53 ± 5.93 N.cm. In the navigation group, the distance to the inferior alveolar nerve and the depth of implant placement were significantly greater compared to the guide plate and freehand groups (P < 0.05). Implant deviation was significantly smaller in both the navigation and guide plate groups compared to the freehand group(P < 0.05). Additionally, the navigation group exhibited significantly reduced root and angle deviations compared to the guide plate group(P < 0.05), highlighting the superior precision of navigation-assisted immediate implant placement. CONCLUSIONS: It is more advantageous to use dynamic navigation rather than a static guide plate and free-hand implant insertion for immediate posterior mandibular implant implantation.

Management of a solitary bone cyst using a custom-made surgical guide for a minimally invasive approach: technical note and case report.

BACKGROUND: Solitary Bone Cyst (SBC), also known as a simple bone cyst, hemorrhagic cyst, or traumatic cyst is classified by the WHO among non-odontogenic benign lesions of the jaw. The article explores the use of a static 3D-printed surgical guide to treat mandibular SBC, emphasizing a minimally surgical approach for this lesion. CASE PRESENTATION: A 20-year-old woman was referred for a persistent mandibular SBC lacuna, without specific complaints. Her medical history included a previous bone trepanation for a SBC in the same area, radiologically and surgically confirmed. X-ray assessment showed a well-defined unilocular radiolucency surrounding the root of the first left lower molar (tooth #36), measuring 10 × 10 mm. Pulp sensitivity was normal. CBCT data and STL files of dental cast were obtained preoperatively and registered. A 3D-printed surgical guide was used for minimally invasive trepanation of the buccal cortical. The simulation used a targeted endodontic microsurgery approach in order to determine axis and diameter of the trephine. Surgery was performed under local anesthesia. The guide was tooth supported integrating tubes and a fork for guiding precise trepanation. A 3.5 mm round bone window was created, leaving an empty cavity confirming SBC diagnosis and permitting bone curettage. A blood clot was obtained to promote bone healing. Complete reossification was observed after 6 months. The follow-up at 2 years confirmed a complete bone healing with normal pulp sensitivity. DISCUSSION: The 3D-printed windowed surgical guide with dental support offers big advantages, including improved visibility and reduced errors. Compared to traditional guides, it eliminates visual hindrance and allows easier and quick access to confined areas as well as an improved irrigation during drilling process. The article also highlights the importance of preoperative planning while acknowledging potential limitations and errors and surgical complications. CONCLUSION: The use of the 3D-printed surgical guide could be used in routine for minimally invasive intervention of SBC. This case also demonstrates the potential utility of this approach in various procedures in oral and maxillofacial surgery. The technique provides precise localization, reducing complications and enhances operative efficiency.

Prosthetically driven robot-assisted implant surgery: turning a major failure into a simple case.

This case report presents a challenging case of catastrophic failure of a fixed partial denture involving fracture of the prosthesis as well as supporting implants and teeth. The use of robotics facilitated efficient and successful restoration of the patient's dentition. After extraction of 2 fractured teeth and 1 fractured implant, 2 new implants were placed with haptic guidance from robotics, which allowed for stable osteotomies and high initial implant stability quotients. Due to the patient's tremors and heavy occlusal forces, restoration was delayed to allow the surgical site to heal, and the patient received a provisional partial denture. With subsequent placement of the final restoration, the treatment was fully completed in 4.5 months and required only a single surgical procedure. The use of haptic robotics in this case allowed for accurate planning, spacing, and placement of screw-retained implants with an optimal arch, leading to the best long-term outcome for the patient.

Autoclaving-induced dimensional changes of three-dimensional printed surgical guides: An in vitro study.

OBJECTIVES: Surgical guides are frequently used for dental implant placement. The aim of this study was to evaluate the impact of the 3D printing process itself and subsequent steam autoclaving on the dimensional stability of five different resin/printer combinations (RPCs). MATERIALS AND METHODS: Fifty identical surgical guides (10 per group) were produced consisting of five RPCs. Half of the guides (5 per group) were steam autoclaved with cycle 1 (121°C, 1 bar, 20.5 min) and the other half with cycle 2 (134°C, 2 bar, 5.5 min). All guides were scanned with a structured-light (SL) 3D scanner before (T0) and after (T1) autoclaving. Linear measurements along the x-, y-, and z-axes were performed at landmarks on the original STL file and on SL scans at T0 and T1, respectively. Wilcoxon signed-rank test, Kruskal-Wallis test, and linear mixed-effects models were performed, depending on the analysis. RESULTS: Three-dimensional printing was associated with significant dimensional alterations for all RPCs. Steam autoclaving using cycle 1 was associated with significant shrinkage in x- (1 RPC), y- (2 RPCs), and z-direction (2 RPCs), while cycle 2 was also associated with shrinkage in x- (2 RPCs), y- (1 RPC), and z-direction (1 RPC). One resin did not present any dimensional changes independently of the cycle. CONCLUSIONS: The majority of the guides presented minor but significant shrinkage due to 3D printing itself and both steam autoclaving cycles, the extent varied between different RPCs. Whether these changes compromise implant placement accuracy remains to be investigated.