Oxidative desulfurization pathway for complete catabolism of sulfoquinovose by bacteria.

Catabolism of sulfoquinovose (SQ; 6-deoxy-6-sulfoglucose), the ubiquitous sulfosugar produced by photosynthetic organisms, is an important component of the biogeochemical carbon and sulfur cycles. Here, we describe a pathway for SQ degradation that involves oxidative desulfurization to release sulfite and enable utilization of the entire carbon skeleton of the sugar to support the growth of the plant pathogen Agrobacterium tumefaciens SQ or its glycoside sulfoquinovosyl glycerol are imported into the cell by an ATP-binding cassette transporter system with an associated SQ binding protein. A sulfoquinovosidase hydrolyzes the SQ glycoside and the liberated SQ is acted on by a flavin mononucleotide-dependent sulfoquinovose monooxygenase, in concert with an NADH-dependent flavin reductase, to release sulfite and 6-oxo-glucose. An NAD(P)H-dependent oxidoreductase reduces the 6-oxo-glucose to glucose, enabling entry into primary metabolic pathways. Structural and biochemical studies provide detailed insights into the recognition of key metabolites by proteins in this pathway. Bioinformatic analyses reveal that the sulfoquinovose monooxygenase pathway is distributed across Alpha- and Betaproteobacteria and is especially prevalent within the Rhizobiales order. This strategy for SQ catabolism is distinct from previously described pathways because it enables the complete utilization of all carbons within SQ by a single organism with concomitant production of inorganic sulfite.

Anode electrolysis of sulfides.

Traditional sulfide metallurgy produces harmful sulfur dioxide and is energy intensive. To this end, we develop an anode electrolysis approach in molten salt by which sulfide is electrochemically split into sulfur gas at a graphite inert anode while releasing metal ions that diffuse toward and are deposited at the cathode. The anodic splitting dictates the "sulfide-to-metal ion and sulfur gas" conversion that makes the reaction recur continuously. Using this approach, Cu2S is converted to sulfur gas and Cu in molten LiCl-KCl at 500 °C with a current efficiency of 99% and energy consumption of 0.420 kWh/kg-Cu (only considering the electricity for electrolysis). Besides Cu2S, the anode electrolysis can extract Cu from Cu matte that is an intermediate product from the traditional sulfide smelting process. More broadly, Fe, Ni, Pb, and Sb are extracted from FeS, CuFeS2, NiS, PbS, and Sb2S3, providing a general electrochemical method for sulfide metallurgy.

In Situ Implanting ZrW2 O7 (OH)2 (H2 O)2 Nanorods into Hierarchical Functionalized Metal-Organic Framework via Solvent-Free Approach for Upgrading Catalytic Performance.

Host-guest catalyst provides new opportunities for targeted applications and the development of new strategies for preparing host-guest catalysts is highly desired. Herein, an in situ solvent-free approach is developed for implanting ZrW2 O7 (OH)2 (H2 O)2 nanorods (ZrW-NR) in nitro-functionalized UiO-66(Zr) (UiO-66(Zr)-NO2 ) with hierarchical porosity, and the encapsulation of ZrW-NR enables the as-prepared host-guest catalyst remarkably enhanced catalytic performance for both for oxidative desulfurization (ODS) and acetalization reactions. ZrW-NR@UiO-66(Zr)-NO2 can eliminate 500 ppm sulfur within 9 min at 40 °C in ODS, and can transform 5.6 mmol benzaldehyde after 3 min at room temperature in acetalization reaction. Its turnover frequencies reach 72.3 h-1 at 40 °C for ODS which is 33.4 times higher than UiO-66(Zr)-NO2 , and 28140 h-1 for acetalization which is the highest among previous reports. Density functional theory calculation result indicates that the W sites in ZrW-NR can decompose H2 O2 to WVI -peroxo intermediates that contribute to catalytic activity for the ODS reaction. This work opens a new solvent-free approach for preparing MOFs-based host-guest catalysts to upgrade their redox and acid performance.

ι-Carrageenan catabolism is initiated by key sulfatases in the marine bacterium Pseudoalteromonas haloplanktis LL1.

Marine bacteria contribute substantially to cycle macroalgae polysaccharides in marine environments. Carrageenans are the primary cell wall polysaccharides of red macroalgae. The carrageenan catabolism mechanism and pathways are still largely unclear. Pseudoalteromonas is a representative bacterial genus that can utilize carrageenan. We previously isolated the strain Pseudoalteromonas haloplanktis LL1 that could grow on ι-carrageenan but produce no ι-carrageenase. Here, through a combination of bioinformatic, biochemical, and genetic analyses, we determined that P. haloplanktis LL1 processed a desulfurization-depolymerization sequential pathway for ι-carrageenan utilization, which was initiated by key sulfatases PhSulf1 and PhSulf2. PhSulf2 acted as an endo/exo-G4S (4-O-sulfation-ß-D-galactopyranose) sulfatase, while PhSulf1 was identified as a novel endo-DA2S sulfatase that could function extracellularly. Because of the unique activity of PhSulf1 toward ι-carrageenan rather than oligosaccharides, P. haloplanktis LL1 was considered to have a distinct ι-carrageenan catabolic pathway compared to other known ι-carrageenan-degrading bacteria, which mainly employ multifunctional G4S sulfatases and exo-DA2S (2-O-sulfation-3,6-anhydro-α-D-galactopyranose) sulfatase for sulfate removal. Furthermore, we detected widespread occurrence of PhSulf1-encoding gene homologs in the global ocean, indicating the prevalence of such endo-acting DA2S sulfatases as well as the related ι-carrageenan catabolism pathway. This research provides valuable insights into the enzymatic processes involved in carrageenan catabolism within marine ecological systems.IMPORTANCECarrageenan is a type of linear sulfated polysaccharide that plays a significant role in forming cell walls of marine algae and is found extensively distributed throughout the world's oceans. To the best of our current knowledge, the ι-carrageenan catabolism in marine bacteria either follows the depolymerization-desulfurization sequential process initiated by ι-carrageenase or starts from the desulfurization step catalyzed by exo-acting sulfatases. In this study, we found that the marine bacterium Pseudoalteromonas haloplanktis LL1 processes a distinct pathway for ι-carrageenan catabolism employing a specific endo-acting DA2S-sulfatase PhSulf1 and a multifunctional G4S sulfatase PhSulf2. The unique PhSulf1 homologs appear to be widely present on a global scale, indicating the indispensable contribution of the marine bacteria containing the distinct ι-carrageenan catabolism pathway. Therefore, this study would significantly enrich our understanding of the molecular mechanisms underlying carrageenan utilization, providing valuable insights into the intricate roles of marine bacteria in polysaccharide cycling in marine environments.

Desulfurization of thiosemicarbazones: the role of metal ions and biological implications.

Thiosemicarbazones are biologically active substances whose structural formula is formed by an azomethine, an hydrazine, and a thioamide fragments, to generate a R2C=N-NR-C(=S)-NR2 backbone. These compounds often act as ligands to generate highly stable metal-organic complexes. In certain experimental conditions, however, thiosemicarbazones undergo reactions leading to the cleavage of the chain. Sometimes, the breakage involves desulfurization processes. The present work summarizes the different chemical factors that influence the desulfurization reactions of thiosemicarbazones, such as pH, the presence of oxidant reactants or the establishment of redox processes as those electrochemically induced, the effects of the solvent, the temperature, and the electromagnetic radiation. Many of these reactions require coordination of thiosemicarbazones to metal ions, even those present in the intracellular environment. The nature of the products generated in these reactions, their detection in vivo and in vitro, together with the relevance for the biological activity of these compounds, mainly as antineoplastic agents, is discussed.

Genomic analysis and biodesulfurization potential of a new carbon-sulfur bond cleaving Tsukamurella sp. 3OW.

Direct combustion of sulfur-enriched liquid fuel oil causes sulfur oxide emission, which is one of the main contributors to air pollution. Biodesulfurization is a promising and eco-friendly method to desulfurize a wide range of thiophenic compounds present in fuel oil. Previously, numerous bacterial strains from genera such as Rhodococcus, Corynebacterium, Gordonia, Nocardia, Mycobacterium, Mycolicibacterium, Paenibacillus, Shewanella, Sphingomonas, Halothiobacillus, and Bacillus have been reported to be capable of desulfurizing model thiophenic compounds or fossil fuels. In the present study, we report a new desulfurizing bacterium, Tsukamurella sp. 3OW, capable of desulfurization of dibenzothiophene through the carbon-sulfur bond cleavage 4S pathway. The bacterium showed a high affinity for the hydrocarbon phase and broad substrate specificity towards various thiophenic compounds. The overall genome-related index analysis revealed that the bacterium is closely related to Tsukamurella paurometabola species. The genomic pool of strain 3OW contains 57 genes related to sulfur metabolism, including the key dszABC genes responsible for dibenzothiophene desulfurization. The DBT-adapted cells of the strain 3OW displayed significant resilience and viability in elevated concentrations of crude oil. The bacterium showed a 19 and 37% reduction in the total sulfur present in crude and diesel oil, respectively. Furthermore, FTIR analysis indicates that the oil's overall chemistry remained unaltered following biodesulfurization. This study implies that Tsukamurella paurometabola species, previously undocumented in the context of biodesulfurization, has good potential for application in the biodesulfurization of petroleum oils.

Electrochemical Reduction of Flue Gas Denitrification Wastewater to Ammonia Using a Dual-Defective Cu2O@Cu Heterojunction Electrode.

Wet flue gas denitrification offers a new route to convert industrial nitrogen oxides (NOx) into highly concentrated nitrate wastewater, from which the nitrogen resource can be recovered to ammonia (NH3) via electrochemical nitrate reduction reactions (NITRRs). Low-cost, scalable, and efficient cathodic materials need to be developed to enhance the NH3 production rate. Here, in situ electrodeposition was adopted to fabricate a foamy Cu-based heterojunction electrode containing both Cu-defects and oxygen vacancy loaded Cu2O (OVs-Cu2O), which achieved an NH3 yield rate of 3.59 mmol h-1 cm-2, NH3 Faradaic efficiency of 99.5%, and NH3 selectivity of 100%. Characterizations and theoretical calculations unveiled that the Cu-defects and OVs-Cu2O heterojunction boosted the H* yield, suppressed the hydrogen evolution reaction (HER), and served as dual reaction sites to coherently match the tandem reactions kinetics of NO3-to-NO2 and NO2-to-NH3. An integrated system was further built to combine wet flue gas denitrification and desulfurization, simultaneously converting NO and SO2 to produce the (NH4)2SO4 fertilizer. This study offers new insights into the application of low-cost Cu-based cathode for electrochemically driven wet denitrification wastewater valorization.

Ecological risk assessment of heavy metals in desulfurized seawater discharged from a coal-fired power plant in Qingdao.

Despite the prevalence of discharge of large volumes of heavy-metal-bearing seawater from coal-fired power plants into adjacent seas, studies on the associated ecological risks remain limited. This study continuously monitored concentrations of seven heavy metals (i.e. As, Cd, Cr, Cu, Hg, Pb, and Zn) in surface seawater near the outfall of a coal-fired power plant in Qingdao, China over three years. The results showed average concentrations of As, Cd, Cr, Cu, Hg, Pb, and Zn of 2.63, 0.33, 2.97, 4.63, 0.008, 0.85, and 25.00 µg/L, respectively. Given the lack of data on metal toxicity to local species, this study investigated species composition and biomass near discharge outfalls and constructed species sensitivity distribution (SSD) curves with biological flora characteristics. Hazardous concentrations for 5% of species (HC5) for As, Cd, Cr, Cu, Hg, Pb, and Zn derived from SSDs constructed from chronic toxicity data for native species were 3.23, 2.22, 0.06, 2.83, 0.66, 4.70, and 11.07 µg/L, respectively. This study further assessed ecological risk of heavy metals by applying the Hazard Quotient (HQ) and Joint Probability Curve (JPC) based on long-term heavy metal exposure data and chronic toxicity data for local species. The results revealed acceptable levels of ecological risk for As, Cd, Hg, and Pb, but unacceptable levels for Cr, Cu, and Zn. The order of studied heavy metals in terms of ecological risk was Cr > Cu ≈ Zn > As > Cd ≈ Pb > Hg. The results of this study can guide the assessment of ecological risk at heavy metal contaminated sites characterized by relatively low heavy metal concentrations and high discharge volumes, such as receiving waters of coal-fired power plant effluents.

Functional characterization of Helicoverpa assulta CYP6B6 in insecticide metabolism.

The oriental tobacco budworm Helicoverpa assulta (Lepidoptera: Noctuidae) is a specialist pest that may cause serious damages to important crops such as chili pepper and tobacco. Various man-made insecticides have been applied to control the infestation of this pest. To understand how this pest copes with insecticides, it is required to identify key players involved in insecticide transformation. In this study, a P450 gene of CYP6B subfamily was identified in the oriental tobacco budworm, and its expression pattern was revealed. Moreover, the activities of HassCYP6B6 against 12 insecticides were explored using recombinant enzymes produced in the facile Escherichia coli. Data from metabolic experiments showed that HassCYP6B6 was able to metabolize conventional insecticides including organophosporates (diazinon, malathion, phoxim), carbamate propoxur, and pyrethroid esfenvalerate, while no significant metabolism was observed towards new-type pesticides such as neonicotinoids (acetamiprid, imidacloprid), diamides (chlorantraniliprole, cyantraniliprole), macrocyclic lactone (emamectin benzoate, ivermectin), and metaflumizone. Structures of metabolites were proposed based on mass spectrometry analyses. The results demonstrate that HassCYP6B6 plays important roles in the transformation of multiple insecticides via substrate-dependent catalytic mechanisms including dehydrogenation, hydroxylation and oxidative desulfurization. The findings have important applied implications for the usage of insecticides.

Electronic Phosphide-Support Interactions in Carbon-Supported Molybdenum Phosphide Catalysts Derived from Metal-Organic Frameworks.

Interfacial interaction in carbon-supported catalysts can offer geometric, electronic, and compositional effects that can be utilized to regulate catalytically active sites, while this is far from being systematically investigated in carbon-supported phosphide catalysts. Here, we proposed a novel concept of electronic phosphide-support interaction (EPSI), which was confirmed by using molybdenum phosphide (MoP) supported on nitrogen-phosphorus codoped carbon (NPC) as a model catalyst (MoP@NPC). Such a strong EPSI could not only stabilize MoP in a low-oxidation state under environmental conditions but also regulate its electronic structure, leading to reduced dissociation energy of the oxygen-containing intermediates and enhancing the catalytic activity for oxidative desulfurization. The removal of dibenzothiophene over the MoP@NPC was as high as 100% with a turnover frequency (TOF) value of 0.0027 s-1, which was 33 times higher than that of MoP without EPSI. This work will open new avenues for the development of high-performance supported phosphide catalysts.

Alkaline absorbents for SO2 and SO3 removal: A comprehensive review.

Injection of an alkaline absorbent into the flue gas can significantly reduce SO2 and SO3 emissions. The article presents alkaline absorbents employed in industrial processes to remove SO2 and SO3 from flue gases, detailing their characteristics and applications across various process conditions. It summarizes the mechanisms and influencing factors behind SO2 and SO3 removal, outlines the impact of multi-component gases, particularly SO2, on SO3 removal in actual flue gases, and elucidates this competitive phenomenon from a theoretical standpoint. The article compares the application scenarios and efficiencies of alkaline absorbents across different processes, identifies the optimal combinations of various absorbents and processes, and proposes a synergistic approach for the removal of SO2 and SO3. The findings demonstrate that by injecting calcium- or sodium-based absorbents into dry processes, SO2 and SO3 can be removed efficiently and cost-effectively, with process optimization and absorbent modifications further enhancing the SOx removal efficiency. In the future, by blending two or more absorbents and applying them to dry processes, a synergistic removal of SO2 and SO3 can be achieved.

Extraction of Dibenzyl Disulfide from Transformer Oils by Acidic Ionic Liquid.

In recent years, dibenzyl disulfide (DBDS) in transformer oils has caused many transformer failures around the world, and its removal has attracted more attention. In this work, nine imidazolium-based ionic liquids (ILs) were applied as effective, green desulfurization extractants for DBDS-containing transformer oil for the first time. The results show that the desulfurization ability of the ILs for DBDS followed the order of [BMIM]FeCl4 > [BMIM]N(CN)2 > [BMIM]SCN > [BMIM](C4H9O)2PO2 > [BMIM]MeSO4 > [BMIM]NTf2 > [BMIM]OTf > [BMIM]PF6 > [BMIM]BF4. Especially, [BMIM]FeCl4 ionic liquid had excellent removal efficiency for DBDS, with its S partition coefficient KN (S) being up to 2642, which was much higher than the other eight imidazolium-based ILs. Moreover, the extractive performance of [BMIM]FeCl4 increased with an increasing molar ratio of FeCl3 to [BMIM]Cl, which was attributed to its Lewis acidity and fluidity. [BMIM]FeCl4 ionic liquid could also avail in the desulfurization of diphenyl sulfide (DPS) from model oils. The experimental results demonstrate that π-π action, π-complexation, and Lewis acid-base interaction played important roles in the desulfurization process. Finally, the ([BMIM]FeCl4) ionic liquid could be recycled five times without a significant decrease in extractive ability.

Aerobic Oxidative Desulfurization by Supported Polyoxometalate Ionic Liquid Hybrid Materials via Facile Ball Milling.

With the increasingly strict limitations on emission standards of vehicles, deep desulfurization in fuel is indispensable for social development worldwide. In this study, a series of hybrid materials based on SiO2-supported polyoxometalate ionic liquid were successfully prepared via a facile ball milling method and employed as catalysts in the aerobic oxidative desulfurization process. The composition and structure of prepared samples were studied by various techniques, including FT-IR, UV-vis DRS, wide-angle XRD, BET, XPS, and SEM images. The experimental results indicated that the synthesized polyoxometalate ionic liquids were successfully loaded on SiO2 with a highly uniform dispersion. The prepared catalyst (C16PMoV/10SiO2) exhibited good desulfurization activity on different sulfur compounds. Moreover, the oxidation product and active species in the ODS process were respectively investigated via GC-MS and ESR analysis, indicating that the catalyst can activate oxygen to superoxide radicals during the reaction to convert DBT to its corresponding sulfone in the fuel.

Qualitative Analysis of Nitrogen and Sulfur Compounds in Vacuum Gas Oils via Matrix-Assisted Laser Desorption Ionization Time of Flight Mass Spectrometry.

Analysis of the heavy fractions in crude oil has been important in petroleum industries. It is well known that heavy fractions such as vacuum gas oils (VGOs) include heteroatoms, of which sulfur and nitrogen are often characterized in many cases. We conducted research regarding the molecular species analysis of VGOs. Further refine processes using VGOs are becoming important when considering carbon recycling. In this work, we attempted to classify compounds within VGOs provided by Kuwait Institute for Scientific Research. Two VGOs were priorly distillated from Kuwait Export crude and Lower Fars crude. Quantitative analysis was performed mainly using matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOFMS). MALDI-TOF-MS has been developed for analyzing high-molecular-weight compounds such as polymer and biopolymers. As matrix selection is one of the most important aspects in MALDI-TOFMS, the careful selection of a matrix was firstly evaluated, followed by analysis using a Kendrick plot with nominal mass series (z*). The objective was to evaluate if this work could provide an effective classification of VGOs compounds. The Kendrick plot is a well-known method for processing mass data. The difference in the Kendrick mass defect (KMD) between CnH2n-14S and CnH2n-20O is only 0.0005 mass units, which makes it difficult in general to distinguish these compounds. However, since the z* value showed effective differences during the classification of these compounds, qualitative analysis could be possible. The analysis using nominal mass series showed the potential to be used as an effective method in analyzing heavy fractions.

Precision forecasting of spray-dry desulfurization using Gaussian noise data augmentation and k-fold cross-validation optimized neural computing.

Perceptron models have become integral tools for pattern recognition and classification problems in engineering fields. This study envisioned implementing artificial neural networks to forecast the performance of a mini-spray dryer for desulfurization activities. This work adopted k-fold cross-validation, a rigorous technique that evaluates model performance across multiple data segments. Several ANN models (21) were trained on data obtained from sulfation conditions, including sulfation temperature (120 °C-200 °C), slurry pH (4-12), stoichiometric ratio (0.5-2.5), slurry solid concentration (6%-14%) as the feed input and sulfur capture as the response. Three hundred synthetic datasets generated using the Gaussian noise data augmentation underwent a 10-fold cross-validation process before simulation on neural networks triggered by the logsig and tansig activation functions. The computation accuracy was further evaluated by altering the number of hidden cells from 2 to 10. The ANN architectures were assessed using statistical metrics such as mean square error (MSE), root mean square error (RMSE), mean absolute percentage error (MAPE), and the coefficient of determination (R2) techniques. Overall, error estimation suggests cross-validation and data augmentation are critical in efficient neural network generalization. The logsig function trained with 10 hidden cells presented closer data articulation when mapped onto actual values.

Effect of relative humidity on the desulfurization performance of calcium-based desulfurizer.

Low desulfurization efficiency impedes the wide application of dry desulfurization technology, which is a low-cost and simple process, and one significant solution is the development and manufacture of high-performance desulfurizers. In this study, firstly, a steam jet mill was used to digest quicklime; then, we utilized numerical simulation to study the flow field distribution and analyze the driving factors of quicklime digestion; and lastly, the desulfurization performance of the desulfurizer was evaluated under different relative humidities. The results show that the desulfurizer prepared via the steam jet mill had better apparent activity than traditional desulfurizers. Also, the entire jet flow field of the steam jet mill is in a supersonic and highly turbulent flow state, with high crushing intensity and good particle acceleration performance. Sufficient contact with the nascent surface maximizes the formation of slaked lime. The experiments demonstrated that the operating time with 100% desulfurization efficiency and the "break-through" time for the desulfurizer prepared via the steam jet mill is longer than that of traditional desulfurizers, and has significant advantages, especially at low flue gas relative humidity. Compared with traditional desulfurizers, the desulfurizer prepared via steam jet mill expands the range of acceptable flue gas temperature, and the failure temperature is 1.625 times that of traditional desulfurizers. This work breaks through the technical bottleneck of low dry desulfurization efficiency, which is an important step in pushing forward the application of dry desulfurization.

Dearomative Intramolecular (4+3) Cycloadditions of Thiophenes.

Unexpectedly facile dearomative intramolecular (4+3) cycloadditions of thiophenes with epoxy enolsilanes, providing sulfur-bridged cycloadducts, are reported. A total of fifteen thiophene substrates have been found to undergo (4+3) cycloaddition smoothly to produce endo and exo (4+3) adducts in yields of up to 83 % with moderate to good diastereoselectivity. Complete conservation of enantiomeric purity was observed when the optically enriched epoxide was used. The desulfurizing transformations of the sulfur-bridged skeleton of the cycloadducts provide functionalized 6,7-fused bicyclic frameworks consisting of 1,3-cycloheptadiene subunits. Density functional theory calculations reveal the origins of the facile dearomatization of thiophenes in these (4+3) cycloadditions.

Porous Organic Polymers for Efficient and Selective SO2 Capture from CO2-rich Flue Gas.

The quest for effective technologies to reduce SO2 pollution is crucial due to its adverse effects on the environment and human health. Markedly, removing a ppm level of SO2 from CO2-containing waste gas is a persistent challenge, and current technologies suffer from low SO2/CO2 selectivity and energy-intensive regeneration processes. Here using the molecular building blocks approach and theoretical calculation, we constructed two porous organic polymers (POPs) encompassing pocket-like structures with exposed imidazole groups, promoting preferential interactions with SO2 from CO2-containing streams. Markedly, the evaluated POPs offer outstanding SO2/CO2 selectivity, high SO2 capacity, and an easy regeneration process, making it one of the best materials for SO2 capture. To gain better structural insights into the notable SO2 selectivity of the POPs, we used dynamic nuclear polarization NMR spectroscopy (DNP) and molecular modelling to probe the interactions between SO2 and POP adsorbents. The newly developed materials are poised to offer an energy-efficient and environment-friendly SO2 separation process while we are obliged to use fossil fuels for our energy needs.

Efficient Photocatalytic Desulfurization in Air through Improved Photogenerated Carriers Separation in MOF MIL101/Carbon Dots-g-C3N4 Nanocomposites.

The extensive industrial applications of fuel oil, a critical strategic resource, are accompanied by significant environmental and health concerns due to the presence of sulfur-containing compounds in its composition, which result in hazardous combustion waste. Extensive research has been conducted to develop technologies for low-vulcanization fuel production to address this issue. Consequently, the investigation of catalysts for environmentally friendly and safe photocatalytic desulfurization becomes imperative. To that end, we have designed efficient MIL-101(Fe)/CQDs@g-C3N4 (MIL101/CDs-C3N4) Z-scheme heterojunction photocatalysts with high carrier separation and mobility through a thermal polymerization-hydrothermal strategy. The high concentration of photogenerated carriers facilitates the activation of oxygen and H2O2, leading to increased production of ROS (⋅O2 -, ⋅OH, h+), thereby enhancing the photocatalytic desulfurization (PODS). Additionally, DFT (Density functional theory) calculations were utilized to determine the electron migration pathways of the catalysts and adsorption energies of DBT (dibenzothiophene). Moreover, Gibbs free energy calculations indicated that MIL101/CDs-C3N4 exhibited the lowest activation energy for oxygen and H2O2. The mechanism of photocatalytic desulfurization was proposed through a combination of theoretical calculations and experimental studies. This study provides guidance for the development of MOF-based Z-scheme systems and their practical application in desulfurization processes.

Enhancing Adsorption Desulfurization Performance Using Enriched Cu(I) Sites over Microenvironment-Modulated HKUST-1.

High-efficiency adsorption of aromatic sulfur-containing compounds from liquid hydrocarbon fuels over metal-organic frameworks (MOFs) is challenging because of inert metal sites. A new method, the Ce-enhanced modulation of MOFs' microenvironment, is proposed to modulate the -COO···Cu(II)- coordination microenvironment of Hong Kong University of Science and Technology (HKUST-1) using Ce(III) as a molecular scalpel for fabricating abundant high-efficiency Cu(I) and Cu-coordination-unsaturated sites and improving the pore structures around adsorptive sites. The optimal CH-250 thus exhibits adsorptive capacities for 20.2, 28.0, and 58.3 mg S g-1 of thiophene, benzo-thiophene, and dibenzothiophene, respectively, which are superior to most reported MOFs, zeolites, and nanoporous carbons. The constructed Cu(I) sites show stronger affinity for dibenzothiophene (-0.86 eV) than the initial Cu(II) (-0.74 eV) for out-of-plane adsorption. Further, they are far stronger in-plane adsorption interactions in DBT/CH-250 (-0.90 eV) than those in DBT/HKUST-1 (-0.37 eV). Thus, molecular engineering for modulating the coordination microenvironment of MOFs shows great potential for adsorption desulfurization.