Enabling High Reversibility of Zn anode via Interfacial Engineering Induced by Amino acid Electrolyte Additive.

Despite possessing substantial benefits of enhanced safety and cost-effectiveness, the aqueous zinc ion batteries (AZIBs) still suffers with the critical challenges induced by inherent instability of Zn metal in aqueous electrolytes. Zn dendrites, surface passivation, and corrosion are some of the key challenges governed by water-driven side reactions in Zn anodes. Herein, a highly reversible Zn anode is demonstrated via interfacial engineering of Zn/electrolyte driven by amino acid D-Phenylalanine (DPA) additions. The preferential adsorption of DPA and the development of compact SEI on the Zn anode suppressed the side reactions, leading to controlled and uniform Zn deposition. As a result, DPA added aqueous electrolyte stabilized Zn anode under severe test environments of 20.0 mA cm-2 and 10.0 mAh cm-2 along with an average plating/stripping Coulombic efficiency of 99.37%. Under multiple testing conditions, the DPA-incorporated electrolyte outperforms the control group electrolyte, revealing the critical additive impact on Zn anode stability. This study advances interfacial engineering through versatile electrolyte additive(s) toward development of stable Zn anode, which may lead to its practical implementation in aqueous rechargeable zinc batteries.

Suppressing Formation of Zn─Mn─O Phases by In Situ Ti Decoration of MnO2 for Long Lifespan MnO2-Zn Battery.

Mildly-acidic MnO2-Zn batteries are considered as a promising alternative for large-scale energy storage systems for their low toxicity, high safety, and low cost. Though, the degradation of MnO2 with cycling still hinders the further development of the batteries. In this study, it is observed that the decrease in available capacity of MnO2 with charge and discharge is accompanied by a structural transformation with the emergence of Zn─Mn─O phases. An electrodeposition test indicates that the Zn─Mn─O phase is formed from a co-precipitation of Zn and Mn during the charge process. Further, the structural change of MnO2 is suppressed and its cycle stability is improved with the addition of TiOSO4 as a facile electrolyte additive. As a result, under a current of 1200 mA g-1, the MnO2 electrode still gives a capacity of 230 mAh g-1 for over 1500 cycles. Capacity retention is 75% after 10 000 cycles under a current rate of 4800 mA g-1. These findings provide fundamental insights on the degradation mechanism of MnO2 and a new strategy to improve the electrochemical performance of aqueous MnO2-Zn batteries.

Inorganic Electrolyte Additive Promoting the Interfacial Stability for Durable Zn-Ion Batteries.

The development of Zn-ion batteries (ZIBs) is always hindered by the ruleless interface reactions between the solid electrode and liquid electrolyte, and seeking appropriate electrolyte additives is considered as a valid approach to stabilize the electrode/electrolyte interphases for high-performance ZIBs. Benefiting from the unique solubility of TiOSO4 in acidic solution, the composite electrolyte of 2 m ZnSO4+30 mm TiOSO4 (ZSO/TSO) is configured and its positive contribution to Zn//Zn cells, Zn//Cu cells, and Zn//NH4V4O10 batteries are comprehensively investigated by electrochemical tests and theoretical calculations. Based on the theoretical calculations, the introduction of TiOSO4 contributes to facilitating the desolvation kinetics of Zn2+ ions and guarantees the stable interface reactions of both zinc anode and NH4V4O10 cathode. As expected, Zn//Zn cells keep long-term cycling behavior for 3750 h under the test condition of 1 mA cm-2-1 mAh cm-2, Zn//Cu cells deliver high Coulombic efficiency of 99.9% for 1000 cycles under the test condition of 5 mA cm-2-1 mAh cm-2, and Zn//NH4V4O10 batteries maintain reversible specific capacity of 193.8 mAh g-1 after 1700 cycles at 5 A g-1 in ZSO/TSO electrolyte. These satisfactory results manifest that TiOSO4 additive holds great potential to improve the performances of ZIBs.

LiF/Li3N-Rich Electrode-Electrolyte Interfaces Enabled by Multi-Functional Electrolyte Additive to Achieve High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

LiPF6-based carbonate electrolytes have been extensively employed in commercial Li-ion batteries, but they face numerous interfacial stability challenges while applicating in high-energy-density lithium-metal batteries (LMBs). Herein, this work proposes N-succinimidyl trifluoroacetate (NST) as a multifunctional electrolyte additive to address these challenges. NST additive could optimize Li+ solvation structure and eliminate HF/H2O in the electrolyte, and preferentially be decomposed on the Ni-rich cathode (LiNi0.8Co0.1Mn0.1O2, NCM811) to generate LiF/Li3N-rich cathode-electrolyte interphase (CEI) with high conductivity. The synergistic effect reduces the electrolyte decomposition and inhibits the transition metal (TM) dissolution. Meanwhile, NST promotes the creation of solid electrolyte interphase (SEI) rich in inorganics on the Li metal anode (LMA), which restrains the growth of Li dendrites, minimizes parasitic reactions, and fosters rapid Li+ transport. As a result, compared with the reference, the Li/LiNi0.8Co0.1Mn0.1O2 cell with 1.0 wt.% NST exhibits higher capacity retention after 200 cycles at 1C (86.4% vs. 64.8%) and better rate performance, even at 9C. In the presence of NST, the Li/Li symmetrical cell shows a super-stable cyclic performance beyond 500 h at 0.5 mA cm-2/0.5 mAh cm-2. These unique features of NST are a promising solution for addressing the interfacial deterioration issue of high-capacity Ni-rich cathodes paired with LMA.

Saccharin Sodium Coupling Fluorinated Solvent Enabled Stable Interface for High-Voltage Li-Metal Batteries.

Optimizing the electrode/electrolyte interface structure is the key to realizing high-voltage Li-metal batteries (LMBs). Herein, a functional electrolyte is introduced to synergetically regulate the interface layer structures on the high-voltage cathode and the Li-metal anode. Saccharin sodium (NaSH) as a multifunctional electrolyte additive is employed in fluorinated solvent-based electrolyte (FBE) for robust interphase layer construction. On the one hand, combining the results of ex-situ techniques and in-situ electrochemical dissipative quartz crystal microbalance (EQCM-D) technique, it can be seen that the solid electrolyte interface (SEI) layer constructed by NaSH-coupled fluoroethylene carbonate (FEC) on Li-metal anode significantly inhibits the growth of lithium dendrites and improves the cyclic stability of the anode. On the other hand, the experimental results also confirm that the cathode-electrolyte interface (CEI) layer induced by NaSH-coupled FEC effectively protects the active materials of LiCoO2 and improves their structural stability under high-voltage cycling, thus avoiding the material rupture. Moreover, theoretical calculation results show that the addition of NaSH alters the desolvation behavior of Li+ and enhances the transport kinetics of Li+ at the electrode/electrolyte interface. In this contribution, the LiCoO2ǁLi full cell containing FBE+NaSH results in a high capacity retention of 80% after 530 cycles with a coulombic efficiency of 99.8%.

Asymmetrical Functionalization of Polarizable Interface Restructuring Molecules for Rapid and Longer Operative Lithium Metal Batteries.

Lithium metal batteries (LMBs) have been recognized as high-energy storage alternatives; however, problematic surface reactions due to dendritic Li growth are major obstacles to their widespread utilization. Herein, a 3-mercapto-1-propanesulfonic acid sodium salt (MPS) with asymmetrically functionalized thiol and sulfonate groups as polarizable interface-restructuring molecules is proposed to achieve rapid and longer-operating LMBs. Under a harsh condition of 5 mA cm-2, Li-Li symmetric cells employing MPS can be cycled over 1200 cycles, outperforming those employing other molecules symmetrically functionalized by thiol or sulfonate groups. The improved performance of the Li|V2O5 full cell is demonstrated by introducing MPS additives. MPS additives offer advantages by flattening the surface, reconfiguring Li nucleation and growth along the stable (110) plane, and forming a durable and conductive solid-electrolyte interface layer (SEI). This study suggests an effective way to develop a new class of electrolyte additives for LMBs by controlling engineering factors, such as functional groups and polarizable properties.

Organic Electrolyte Additive: Dual Functions Toward Fast Sulfur Conversion and Stable Li Deposition for Advanced Li-S Batteries.

Lithium-sulfur (Li-S) battery is of great potential for the next generation energy storage device due to the high specific capacity energy density. However, the sluggish kinetics of S redox and the dendrite Li growth are the main challenges to hinder its commercial application. Herein, an organic electrolyte additive, i.e., benzyl chloride (BzCl), is applied as the remedy to address the two issues. In detail, BzCl can split into Bz· radical to react with the polysulfides, forming a Bz-S-Bz intermediate, which changes the conversion path of S and improves the kinetics by accelerating the S splitting. Meanwhile, a tight and robust solid electrolyte interphase (SEI) rich in inorganic ingredients namely LiCl, LiF, and Li2O, is formed on the surface of Li metal, accelerating the ion conductivity and blocking the decomposition of the solvent and lithium polysulfides. Therefore, the Li-S battery with BzCl as the additive remains high capacity of 693.2 mAh g-1 after 220 cycles at 0.5 C with a low decay rate of 0.11%. This work provides a novel strategy to boost the electrochemical performances in both cathode and anode and gives a guide on the electrolyte design toward high-performance Li-S batteries.

Conductive Robust Interfaces with Fluoro-Borate Based Electrolyte Additive for 4.6 V Well-Cycled LiNi0.90Co0.06Mn0.04O2||Li Batteries.

Owing to the outstanding comprehensive properties of high energy density, excellent cycling ability, and reasonable cost, Ni-rich layered oxides (NCM) are the most promising cathode for lithium-ion batteries (LIBs). To further enhance the specific capacity of Ni-rich layered oxides, it is necessary to increase the cut-off voltage to a higher level. However, a higher cut-off voltage can lead to substantial structural changes and trigger interface side reactions, presenting significant challenges for practical applications (cycle life and safety). Herein, to solve above issues, tris(hexafluoroisopropyl)borate (TFPB) is introduced as a high voltage electrolyte additive for LiNi0.90Co0.06Mn0.04O2 cathode. Based on detail in situ/ex situ characterization, this study proves that TFPB forms a protective solid-state interphase (SEI) layer on the Li-anode. Additionally, derivatives of TFPB are easily oxidatively decomposed to create a dense cathode electrolyte interphase (CEI) film on the cathode. This CEI film effectively prevents the continuous oxidation of the electrolyte and mitigates the adverse effects of HF on the battery. Benefit from the protective SEI and CEI layer, the LiNi0.90Co0.06Mn0.04O2||Li battery with a TFPB-containing electrolyte maintains an unprecedented level of performance, with a capacity retention of 89.1% after 100 cycles under the ultrahigh cut-off voltage of 4.6 V (vs Li/Li+).

Constructing Cyclic Hydrogen Bonding to Suppress Side Reactions and Dendrite Formation on Zinc Anodes.

The high electrochemical reactivity of H2O molecules and zinc metal results in severe side reactions and dendrite formation on zinc anodes. Here we demonstrate that these issues can be addressed by using N-hydroxymethylacetamide (NHA) as additives in 2 M ZnSO4 electrolytes. The addition of NHA molecules, acting as both a hydrogen bond donor and acceptor, enables the formation of cyclic hydrogen bonding with H2O molecules. This interaction disrupts the existing hydrogen bonding networks between H2O molecules, hindering proton transport, and containing H2O molecules within the cyclic hydrogen bonding structure to prevent deprotonation. Additionally, NHA molecules show a preference for adsorption on the (101) crystal surface of zinc metal. This preferential adsorption reduces the surface energy of the (101) plane, facilitating the homogeneous Zn deposition along the (101) direction. Thus, the NHA enables Zn||Zn symmetric cell with a cycle lifespan of 1100 hours at 5 mA cm-2 and Zn||Cu asymmetric cell with a high Coulombic efficiency over 99.5%. Moreover, the NHA-modified Zn||AC zinc ion hybrid capacitor is capable of sustaining 15000 cycles at 2 A g-1. This electrolyte additive engineering presents a promising strategy to enhance the performance and broaden the application potential of zinc metal-based energy storage devices.

Improved Interface Construction on Anode and Cathode for Na-Ion Batteries Using Ultralow-Concentration Electrolyte Containing Dual-Additives.

Compared with Li+, Na+ with a smaller stokes radius has faster de-solvation kinetics. An electrolyte with ultralow sodium salt (0.3 M NaPF6) is used to reduce the cell cost. However, the organic-dominated interface, mainly derived from decomposed solvents (SSIP solvation structure), is defective for the long cycling performance of sodium ion batteries. In this work, the simple application of dual additives, including sodium difluoro(oxalato)borate (NaDFOB) and tris(trimethylsilyl)borate (TMSB), is demonstrated to improve the cycling performance of the hard carbon/NaNi1/3Fe1/3Mn1/3O2 cell by constructing interface films on the anode and cathode. A significant improvement on cycling stability has been achieved by incorporating dual additives of NaDFOB and TMSB. Particularly, the capacity retention increased from 17 % (baseline) to 79 % (w/w, 2.0 wt % NaDFOB) and 83 % (w/w, 2.0 wt % NaDFOB and 1.0 wt % TMSB) after 200 cycles at room temperature. Insight into the mechanism of improved interfacial properties between electrodes and electrolyte in ultralow concentration electrolyte has been investigated through a combination of theoretical computation and experimental techniques.

Suitable Stereoscopic Configuration of Electrolyte Additive Enabling Highly Reversible and High-Rate Zn Anodes.

Electrolyte additive engineering is a crucial method for enhancing the performance of aqueous zinc-ion batteries (AZIBs). Recently, most research predominantly focuses on the role of functional groups in regulating electrolytes, often overlooking the impact of molecule stereoscopic configuration. Herein, two isomeric sugar alcohols, mannitol and sorbitol, are employed as electrolyte additives to investigate the impact of the stereoscopic configuration of additives on the ZnSO4 electrolyte. Experimental analysis and theoretical calculations reveal that the primary factor for improving Zn anode performance is the regulation of the solvation sheath by these additives. Among the isomers, mannitol exhibits stronger binding energies with Zn2+ ions and water molecules due to its more suitable stereoscopic configuration. These enhanced bindings allow mannitol to coordinate with Zn2+, contributing to solvation structure formation and reducing the active H2O molecules in the bulk electrolyte, resulting in suppressed parasitic reactions and inhibited dendritic growth. As a result, the zinc electrodes in mannitol-modified electrolyte exhibit excellent cycling stability of 1600 h at 1 mA cm-2 and 900 h at 10 mA cm-2, respectively. Hence, this study provides novel insights into the importance of suitable stereoscopic molecule configurations in the design of electrolyte additives for highly reversible and high-rate Zn anodes.

Dynamic Molecular Interphases Regulated by Trace Dual Electrolyte Additives for Ultralong-Lifespan and Dendrite-Free Zinc Metal Anode.

Metallic zinc is a promising anode material for rechargeable aqueous multivalent metal-ion batteries due to its high capacity and low cost. However, the practical use is always beset by severe dendrite growth and parasitic side reactions occurring at anode/electrolyte interface. Here we demonstrate dynamic molecular interphases caused by trace dual electrolyte additives of D-mannose and sodium lignosulfonate for ultralong-lifespan and dendrite-free zinc anode. Triggered by plating and stripping electric fields, the D-mannose and lignosulfonate species are alternately and reversibly (de-)adsorbed on Zn metal, respectively, to accelerate Zn2+ transportation for uniform Zn nucleation and deposition and inhibit side reactions for high Coulombic efficiency. As a result, Zn anode in such dual-additive electrolyte exhibits highly reversible and dendrite-free Zn stripping/plating behaviors for >6400 hours at 1 mA cm-2, which enables long-term cycling stability of Zn||ZnxMnO2 full cell for more than 2000 cycles.

Tailoring Na+ Solvation Environment and Electrode-Electrolyte Interphases with Sn(OTf)2 Additive in Non-flammable Phosphate Electrolytes towards Safe and Efficient Na-S Batteries.

Room-temperature sodium-sulfur (RT Na-S) batteries are promising for low-cost and large-scale energy storage applications. However, these batteries are plagued by safety concerns due to the highly flammable nature of conventional electrolytes. Although non-flammable electrolytes eliminate the risk of fire, they often result in compromised battery performance due to poor compatibility with sodium metal anode and sulfur cathode. Herein, we develop an additive of tin trifluoromethanesulfonate (Sn(OTf)2 ) in non-flammable phosphate electrolytes to improve the cycling stability of RT Na-S batteries via modulating the Na+ solvation environment and interface chemistry. The additive reduces the Na+ desolvation energy and enhances the electrolyte stability. Moreover, it facilitates the construction of Na-Sn alloy-based anode solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI). These interphases help to suppress the growth of Na dendrites and the dissolution/shuttling of sodium polysulfides (NaPSs), resulting in improved reversible capacity. Specifically, the Na-S battery with the designed electrolyte boosts the capacity from 322 to 906 mAh g-1 at 0.5 A g-1 . This study provides valuable insights for the development of safe and high-performance electrolytes in RT Na-S batteries.

Spontaneous Molecule Aggregation for Nearly Single-Ion Conducting Sol Electrolyte to Advance Aqueous Zinc Metal Batteries: The Case of Tetraphenylporphyrin.

Zn metal as a promising anode of aqueous batteries faces severe challenges from dendrite growth and side reactions. Here, tetraphenylporphyrin tetrasulfonic acid (TPPS) is explored as an electrolyte additive for advanced Zn anodes. It is interesting to note that TPPS spontaneously assembles into unique aggregates. As they adsorb on the Zn anode, the aggregates enhance the resistance to electrolyte percolation and dendrite growth compared to single molecules. Meanwhile, TPPS facilitates anion association in the solvation sheath of Zn2+, and boosts the transference number of Zn2+ up to 0.95. Therefore, anion-related side reactions and anion-induced electrode overpotentials are reduced accordingly. In this context, the electrolyte containing TPPS exhibits excellent electrochemical performance. Even under a high loading of MnO2 (25 mg cm-2), a limited Zn supply (N/P ratio=1.7), and a lean electrolyte (15 µL mAh-1), the full cells still represent a higher cumulative capacity compared to the reported data. The advantages of this electrolyte are also adapted to other cathode materials. The pouch cells of Zn||NaV3O8 ⋅ 1.5H2O realize a capacity of ~0.35 Ah at 0.4 C under harsh conditions.

Fence-type Molecular Electrocatalysts for High-Performance Lithium-Sulfur Batteries.

Improving the slow redox kinetics of sulfur species and shuttling issues of soluble intermediates induced from the multiphase sulfur redox reactions are crucial factors for developing the next-generation high-energy-density lithium-sulfur (Li-S) batteries. In this study, we successfully constructed a novel molecular electrocatalyst through in situ polymerization of bis(3,4-dibromobenzene)-18-crown-6 (BD18C6) with polysulfide anions on the cathode interface. The crown ether (CE)-based polymer acts as a spatial "fence" to precisely control the unique redox characteristics of sulfur species, which could confine sulfur substance within its interior and interact with lithium polysulfides (LiPSs) to optimize the reaction barrier of sulfur species. The "fence" structure and the double-sided Li+ penetrability of the CE molecule may also prevent the CE catalytic sites from being covered by sulfur during cycling. This new fence-type electrocatalyst mitigates the "shuttle effect", enhances the redox activity of sulfur species, and promotes the formation of three-dimensional stacked lithium sulfide (Li2S) simultaneously. It thus enables lithium-sulfur batteries to exhibit superior rate performance and cycle stability, which may also inspire development facing analogous multiphase electrochemical energy-efficient conversion process.

Enhancement of Overall Kinetics by Se-Br Chemistry in Rechargeable Li-S Batteries.

The sluggish kinetics of lithium-sulfur (Li-S) batteries severely impedes the application in extreme conditions. Bridging the sulfur cathode and lithium anode, the electrolyte plays a crucial role in regulating kinetic behaviors of Li-S batteries. Herein, we report a multifunctional electrolyte additive of phenyl selenium bromide (PhSeBr) to simultaneously exert positive influences on both electrodes and the electrolyte. For the cathode, an ideal conversion routine with lower energy barrier can be attained by the redox mediator and homogeneous catalyst derived from PhSeBr, thus improving the reaction kinetics and utilization of sulfur. Meanwhile, the presence of Se-Br bond helps to reconstruct a loose solvation sheath of lithium ions and a robust bilayer SEI with excellent ionic conductivity, which contributes to reducing the de-solvation energy and simultaneously enhancing the interfacial kinetics. The Li-S battery with PhSeBr displays superior long cycling stability with a reversible capacity of 1164.7 mAh g-1 after 300 cycles at 0.5 C rate. And the pouch cell exhibits a maximum capacity of 845.3 mAh and a capacity retention of 94.8 % after 50 cycles. Excellent electrochemical properties are also obtained in extreme conditions of high sulfur loadings and low temperature of -20 °C. This work demonstrates the versatility and practicability of the special additive, striking out an efficient but simple method to design advanced Li-S batteries.

High-Entropy-Inspired Multicomponent Electrical Double Layer Structure Design for Stable Zinc Metal Anodes.

Regulating the electrical double layer (EDL) structure can enhance the cycling stability of Zn metal anodes, however, the effectiveness of this strategy is significantly limited by individual additives. Inspired by the high-entropy (HE) concept, we developed a multicomponent (MC) EDL structure composed of La3+, Cl-, and BBI anions by adding dibenzenesulfonimide (BBI) and LaCl3 additives into ZnSO4 electrolytes (BBI/LaCl3/ZnSO4). Specifically, La3+ ions accumulate within EDL to shield the net charges on the Zn surface, allowing more BBI anions and Cl- ions to enter this region. Consequently, this unique MC EDL enables Zn anodes to simultaneously achieve uniform electric field, robust SEI layer, and balanced reaction kinetics. Moreover, the synergistic parameter-a novel descriptor for quantifying collaborative improvement-was first proposed to demonstrates the synergistic effect between BBI and LaCl3 additives. Benefitting from these advantages, Zn metal anodes achieved a high reversibility of 99.5% at a depth of discharge (DoD) of 51.3%, and Zn|MnO2 pouch cells exhibited a stable cycle life of 100 cycles at a low N/P ratio of 2.9.

Sieving-type Electric Double Layer with Hydrogen Bond Interlocking to Stable Zinc Metal Anode.

The stability of aqueous zinc metal batteries is significantly affected by side reactions and dendrite growth on the anode interface, which primarily originate from water and anions. Herein, we introduce a multi H-bond site additive, 2, 2'-Sulfonyldiethanol (SDE), into an aqueous electrolyte to construct a sieving-type electric double layer (EDL) by hydrogen bond interlock in order to address these issues. On the one hand, SDE replaces H2O and SO42- anions that are adsorbed on the zinc anode surface, expelling H2O/SO42- from the EDL and thereby reducing the content of H2O/SO42- at the interface. On the other hand, when Zn2+ are de-solvated at the interface during the plating, the strong hydrogen bond interaction between SDE and H2O/SO42- can trap H2O/SO42- from the EDL, further decreasing their content at the interface. This effectively sieves them out of the zinc anode interface and inhibits the side reactions. Moreover, the unique characteristics of trapped SO42- anions can restrict their diffusion, thereby enhancing the transference number of Zn2+ and promoting dendrite-free deposition and growth of Zn. Consequently, utilizing an SDE/ZnSO4 electrolyte enables excellent cycling stability in Zn//Zn symmetrical cells and Zn//MnO2 full cells with lifespans exceeding 3500 h and 2500 cycles respectively.

Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long-Lasting Zinc Metal Batteries.

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL-regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long-lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N-dimethyl-1H-imidazole-1-sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O-induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de-solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8 ⋅ 1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high-performance zinc metal batteries.

Unveiling the Mysteries: Acetonitrile's Dance with Weakly-Solvating Electrolytes in Shaping Gas Evolution and Electrochemical Performance of Zinc-ion Batteries.

Aqueous Zn-metal battery (AZMB) is a promising candidate for future large-scale energy storage with commendable capacity, exceptional safety characteristics, and low cost. Acetonitrile (AN) has been widely used as an effective electrolyte constituent to improve AZMBs' performance. However, its functioning mechanisms remain unclear. In this study, we unveiled the critical roles of AN in AZMBs via comparative in situ electrochemical, gaseous, and morphological analyses. Despite its limited ability to solvate Zn ions, AN-modulated Zn-ion solvation sheath with increased anions and decreased water achieves a weakly-solvating electrolyte. As a result, the Zn||Zn cell with AN addition exhibited 63 times longer cycle life than cell without AN and achieved a 4 Ah cm-2 accumulated capacity with no H2 generation. In V2O5||Zn cells, for the first time, AN suppressing CO2 generation, elevating CO2-initiation voltage from 2→2.44 V (H2: 2.43→2.55 V) was discovered. AN-impeded transit and Zn-side deposition of dissolved vanadium ions, known as "crosstalk," ameliorated inhomogeneous Zn deposition and dendritic Zn growth. At last, we demonstrated an AN-enabled high-areal-capacity AZMB (3.3 mAh cm-2) using high-mass-loading V2O5 cathode (26 mg cm-2). This study shed light on the strategy of constructing fast-desolvation electrolytes and offered insights for future electrolyte accommodation for high-voltage AZMB cathodes.