Acat1/Soat1 knockout extends the mutant Npc1 mouse lifespan and ameliorates functional deficiencies in multiple organelles of mutant cells.

Multiple membrane organelles require cholesterol for proper function within cells. The Niemann-Pick type C (NPC) proteins export cholesterol from endosomes to other membrane compartments, including the endoplasmic reticulum (ER), plasma membrane (PM), trans-Golgi network (TGN), and mitochondria, to meet their cholesterol requirements. Defects in NPC cause malfunctions in multiple membrane organelles and lead to an incurable neurological disorder. Acyl-coenzyme A:cholesterol acyltransferase 1 (ACAT1), a resident enzyme in the ER, converts cholesterol to cholesteryl esters for storage. In mutant NPC cells, cholesterol storage still occurs in an NPC-independent manner. Here we report the interesting finding that in a mutant Npc1 mouse (Npc1nmf), Acat1 gene (Soat1) knockout delayed the onset of weight loss, motor impairment, and Purkinje neuron death. It also improved hepatosplenic pathology and prolonged lifespan by 34%. In mutant NPC1 fibroblasts, ACAT1 blockade (A1B) increased cholesterol content associated with TGN-rich membranes and mitochondria, while decreased cholesterol content associated with late endosomes. A1B also restored proper localization of syntaxin 6 and golgin 97 (key proteins in membrane trafficking at TGN) and improved the levels of cathepsin D (a key protease in lysosome and requires Golgi/endosome transport for maturation) and ABCA1 (a key protein controlling cholesterol release at PM). This work supports the hypothesis that diverting cholesterol from storage can benefit multiple diseases that involve cholesterol deficiencies in cell membranes.

Equilibrium Moisture Mediated Esterification Reaction to Achieve Over 100% Lignocellulosic Nanofibrils Yield.

Lignocellulosic nanofibrils (LCNFs) isolation is recognized as an efficient strategy for maximizing biomass utilization. Nevertheless, achieving a 100% yield presents a formidable challenge. Here, an esterification strategy mediated by the equilibrium moisture in biomass is proposed for LCNFs preparation without the use of catalysts, resulting in a yield exceeding 100%. Different from anhydrous chemical thermomechanical pulp (CTMP0%), the presence of moisture (moisture content of 7 wt%, denoted as CTMP7%) introduces a notably distinct process for the pretreatment of CTMP, comprising the initial disintegration and the post-esterification steps. The maleic acid, generated through maleic anhydride (MA) hydrolysis, degrades the recalcitrant lignin-carbohydrate complex (LCC) structures, resulting in esterified CTMP7% (E-CTMP7%). The highly grafted esters compensate for the mass loss resulting from the partial removal of hydrolyzed lignin and hemicellulose, ensuring a high yield. Following microfluidization, favorable LCNF7% with a high yield (114.4 ± 3.0%) and a high charge content (1.74 ± 0.09 mmol g-1) can be easily produced, surpassing most previous records for LCNFs. Additionally, LCNF7% presented highly processability for filaments, films, and 3D honeycomb structures preparation. These findings provide valuable insights and guidance for achieving a high yield in the isolation of LCNFs from biomass through the mediation of equilibrium moisture.

Biodegradable, Strong, and Hydrophobic Regenerated Cellulose Films Enriched with Esterified Lignin Nanoparticles.

The scientific community is pursuing significant efforts worldwide to develop environmentally viable film materials from biomass, particularly transparent, high-performance regenerated cellulose (RC) films, to replace traditional plastics. However, the inferior mechanical performance and hydrophilic nature of RC films are generally not suitable for use as a substitute for plastics in practical applications. Herein, lignin homogenization is used to synthesize high-performance composite films. The esterified lignin nanoparticles (ELNPs) with dispersible and binding advantages are prepared through esterification and nanometrization. In the presence of ELNPs, RC films exhibit a higher tensile strength (110.4 MPa), hydrophobic nature (103.6° water contact angle, 36.6% water absorption at 120 min, and 1.127 × 10-12 g cm cm-2 s-1 Pa-1 water vapor permeability), and exciting optical properties (high visible and low ultraviolet transmittance). The films further display antioxidant activity, oxygen barrier ability, and thermostability. The films completely biodegrade at 12 and 30% soil moisture. Overall, this study offers new insights into lignin valorization and regenerated cellulose composite films as novel bioplastic materials.

Solvent-free synthesis of hydrophobic and amphiphilic esters using a chemically modified lipase from Thermomyces lanuginosus: a comparative study with native and immobilized forms.

Using lipases to catalyze the synthesis of the most differentiated type of compounds remains one of the major challenges among scientists. Seeking more economic and advantageous catalysts is a current goal of green chemistry. In this work, we demonstrate the potential of a chemically modified form of lipase from Thermomyces lanuginosus (cmLTL) for the synthesis of both hydrophobic (heptyl heptanoate, heptyl octanoate, heptyl decanoate, decyl heptanoate, decyl octanoate and decyl decanoate) and amphiphilic (2-(2-ethoxyethoxy)ethyl oleate and 2-(2-ethoxyethoxy)ethyl linoleate) esters, in bulk. The results were compared with its native (LTL) and immobilized (imLTL) forms. The data revealed that LTL showed poor activity for all reactions performed with n-heptane (η<20 %). ImLTL was able to synthesize all hydrophobic esters (η>60 %), with exception of the short ester, heptyl heptanoate. cmLTL was the only form of LTL capable of producing hydrophobic and amphiphilic esters, without compromising the yield when the reactions were performed under solvent-free conditions (>50 %). Molecular modeling showed that the active pocket of cmLTL is able to deeply internalize transcutol, with stronger interactions, justifying the outstanding results obtained. Furthermore, owing to the possibility of cmLTL filtration, the reusability of the catalyst is ensured for at least 6 cycles, without compromising the reaction yields.

Synthesis and antimicrobial studies of cadasides analogues via on-resin esterification.

A series of cadasides analogues have been prepared via a combination of solid-phase peptide synthesis and solution-phase cyclization. Primary structure-activity relationship studies of cadasides have also been established and revealed the critical roles of unnatural amino acid residues, which will facilitate the further development of cadasides analogues with improved antimicrobial activities.

Predigested Mixture of Arachidonic and Docosahexaenoic Acids for Better Bio-Accessibility.

A predigested product from arachidonic acid oil (ARA) and docosahexaenoic acid (DHA) oil in a 2:1 (w/w) ratio has been developed and evaluated in an in vitro digestion model. To produce this predigested lipid mixture, first, the two oils were enzymatically hydrolyzed up to 90% of free fatty acids (FFAs) were achieved. Then, these two fatty acid (FA) mixtures were mixed in a 2:1 ARA-to-DHA ratio (w/w) and enzymatically esterified with glycerol to produce a mixture of FFAs, mono-, di-, and triacylglycerides. Different glycerol ratios and temperatures were evaluated. The best results were attained at 10 °C and a glycerol-to-FA molar ratio of 3:1. The bio-accessibility of this predigested mixture was studied in an in vitro digestion model. A total of 90% of the digestion product was found in the micellar phase, which contained 30% monoacylglycerides, more than 50% FFAs, and a very small amount of triacylglycerols (3% w/w). All these data indicate an excellent bio-accessibility of this predigested mixture.

Synthesis and Cytotoxic Activity of Friedelinyl Esters.

Commonly isolated from plants of Celastraceae family, pentacyclic triterpenoids have a broad spectrum of biological activities, such as antitumor, anti-inflammatory, antinociceptive properties, among others. Structural modifications in these triterpenoids can enhance their biological activity, as well as their selectivity, while improving their physicochemical and pharmacokinetic aspects. In this study, eight novel esters were synthesized: four derivatives of 3α-friedelinol (friedelan-3α-yl p-bromobenzoate (1a); friedelan-3α-yl naproxenate (1b); friedelan-3α-yl pent-4-ynoate (1c); friedelan-3α-yl undec-10-ynoate (1d)) and four derivatives of 3ß-friedelinol (friedelan-3ß-yl p-bromobenzoate (2a); friedelan-3ß-yl naproxenate (2b); friedelan-3ß-yl pent-4-ynoate (2c); friedelan-3ß-yl undec-10-ynoate (2d)). Overall, 3α-friedelinol showed greater reactivity when compared to the ß-epimer. The esters 1b-d and 2b-c were tested for antileukemic activity against THP-1 and K-562 cells but showed low cytotoxicity for both cell lines. The most active against THP-1 cells was friedelan-3ß-yl naproxenate (2b, IC50 = 266±6 µM), and the most active against K-562 cells was friedelan-3α-yl pent-4-ynoate (1c, IC50 = 267±5 µM).

New Chalcone Ester Derivatives as Potential Cytotoxic Agents.

Chalcones are a group with recognized biological potential against many diseases, including cancer. Thus, studies on these structure have become an attractive chemical strategy to optimize their biological activities. One of the synthetic routes used to obtain chalcone derivatives is esterification using either commercial acid chlorides or carboxylic acids. This work focuses on preparing chalcone derivatives and investigating their biological potential against cancer cells. Compound 1 was synthetized by Claisen-Schmidt condensation followed by esterification of the 3'-OH, resulting in eight compounds named 1a-b and 2a-f. All structures were confirmed by 1H and 13C NMR and FT-IR, and cytotoxicity was evaluated in the HCT 116 (colon adenocarcinoma), MCF-7 (breast adenocarcinoma), and CCD-18Co (nontumoral colon fibroblasts) cell lines. Chalcone derivatives were generally more active toward the colon cancer cell line, and 1a and 2b were selected for IC50 determination, presenting IC50 values of approximately 10 µM in HCT 116 cells and above 20 µM in both MCF7 and CDC-18-Co cells, suggesting moderate selectivity. Additionally, we tested compounds 1a and 2b in combination with doxorubicin, but they did not act synergistically with this anthracycline. In conclusion, considering these compounds obtained by the esterification reaction, 1a and 2d showed better results against cytotoxic cells.

Transformation of agricultural wastes into functional oligosaccharides using enzymes and emerging technologies.

INTRODUCTION: Pectin-oligosaccharides (POS) serve diverse purposes as a food ingredient, antimicrobial and biostimulant in plants, and their functionality is linked to the degree of esterification. Grape and broccoli wastes emerge as environmentally friendly alternatives to obtaining pectin, serving as a sustainable source to producing POS. For example, microwaves have proven to be an effective and sustainable method to extract polysaccharides from plant matrices. OBJECTIVE: This work aims to use grape and broccoli wastes as alternative sources for obtaining pectin by microwave-assisted extraction and biotransformation into POS, which possess biological properties. MATERIAL AND METHODS: The extraction conditions were identified at a power of 400 W, 300 s for the extraction of pectin from grape pomace and broccoli waste. Biotransformation of pectins into POS, using commercial enzyme preparations (Viscozyme L and Pectinase). Characterisation was carried out by Fourier-transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. RESULTS: Physicochemical analysis indicated grape pomace and broccoli waste pectins had galacturonic acid content of 63.81 ± 1.67 and 40.83 ± 2.85 mg 100 mg-1, low degree of esterification of 34.89% and 16.22%, respectively. Biotransformation of pectins into POS resulted in a 20% hydrolysis rate. The main enzymatic activity was polygalacturonase for the degradation of the main structure of the pectin. CONCLUSION: Production of POS from agro-industrial wastes by emerging technologies, such as the combined use of microwave-assisted extraction and enzymatic processes, represents an alternative method for the generation of bioactive compounds with distinctive properties suitable for different applications of interest.

Highly Dispersive Gold Nanoclusters Confined within Micropores of Defective UiO-66 for Highly Efficient Aldehyde Oxidation at Mild Conditions.

The oxidative esterification of aldehydes under mild conditions remains a significant challenge. This study introduces a unique defective UiO-66 to achieve gold nanoclusters (AuNCs) for efficient aldehyde oxidation under mild conditions. The construction and characterization of these materials are thoroughly investigated by techniques of XRD, SEM and TEM images, FT-IR, Raman, and XPS spectrum, emphasizing the unique microporous in defective UiO-66 are conducive to the fabrication of AuNCs. The catalytic performance of the prepared materials in aldehyde oxidation reactions is systematically evaluated, demonstrating the remarkable efficiency of dispersed Au@UiO-66-25 with high-content (9.09 wt%) Au-loading and ultra-small size (~2.7 nm). Moreover, mechanistic insights into the catalytic process under mild conditions (70 °C for 1 h) are provided, elucidating the determination of defective UiO-66 in the confined fabrication of AuNCs and subsequent furfural adsorption, which underlie the principles governing the observed enhancements. This study establishes the groundwork for the synthesis of highly dispersed and catalytically active metal nanoparticles using defective MOFs as a platform, advancing the catalytic esterification reaction of furfural to the next level.

A New Approach in Lipase-Octyl-Agarose Biocatalysis of 2-Arylpropionic Acid Derivatives.

The use of lipase immobilized on an octyl-agarose support to obtain the optically pure enantiomers of chiral drugs in reactions carried out in organic solvents is a great challenge for chemical and pharmaceutical sciences. Therefore, it is extremely important to develop optimal procedures to achieve a high enantioselectivity of the biocatalysts in the organic medium. Our paper describes a new approach to biocatalysis performed in an organic solvent with the use of CALB-octyl-agarose support including the application of a polypropylene reactor, an appropriate buffer for immobilization (Tris base-pH 9, 100 mM), a drying step, and then the storage of immobilized lipases in a climatic chamber or a refrigerator. An immobilized lipase B from Candida antarctica (CALB) was used in the kinetic resolution of (R,S)-flurbiprofen by enantioselective esterification with methanol, reaching a high enantiomeric excess (eep = 89.6 ± 2.0%). As part of the immobilization optimization, the influence of different buffers was investigated. The effect of the reactor material and the reaction medium on the lipase activity was also studied. Moreover, the stability of the immobilized lipases: lipase from Candida rugosa (CRL) and CALB during storage in various temperature and humidity conditions (climatic chamber and refrigerator) was tested. The application of the immobilized CALB in a polypropylene reactor allowed for receiving over 9-fold higher conversion values compared to the results achieved when conducting the reaction in a glass reactor, as well as approximately 30-fold higher conversion values in comparison with free lipase. The good stability of the CALB-octyl-agarose support was demonstrated. After 7 days of storage in a climatic chamber or refrigerator (with protection from humidity) approximately 60% higher conversion values were obtained compared to the results observed for the immobilized form that had not been stored. The new approach involving the application of the CALB-octyl-agarose support for reactions performed in organic solvents indicates a significant role of the polymer reactor material being used in achieving high catalytic activity.

Optimization of Biodiesel Production Process Using MoO3 Catalysts and Residual Oil: A Comprehensive Experimental 23 Study.

The study aimed to utilize MoO3 catalysts, produced on a pilot scale via combustion reaction, to produce biodiesel from residual oil. Optimization of the process was conducted using a 23 experimental design. Structural characterization of the catalysts was performed through X-ray diffraction, fluorescence, Raman spectroscopy, and particle size distribution analyses. At the same time, thermal properties were examined via thermogravimetry and differential thermal analysis. Catalytic performance was assessed following process optimization. α-MoO3 exhibited a monophasic structure with orthorhombic phase, whereas α/h-MoO3 showed a biphasic structure. α-MoO3 had a larger crystallite size and higher crystallinity, with thermal stability observed up to certain temperatures. X-ray fluorescence confirmed molybdenum oxide predominance in the catalysts, with traces of iron oxide. Particle size distribution analyses revealed polymodal distributions attributed to structural differences. Both catalysts demonstrated activity under all conditions tested, with ester conversions ranging from 93% to 99%. The single-phase catalyst had a long life cycle and was reusable for six biodiesel production cycles. The experimental design proved to be predictive and significant, with the type of catalyst being the most influential variable. Optimal conditions included α-MoO3 catalyst, oil/alcohol ratio of 1/15, and a reaction time of 60 min, resulting in high biodiesel conversion rates and showcasing the viability of MoO3 catalysts in residual oil biodiesel production.

Palladium-Catalyzed Esterification of Aryl Fluorosulfates with Aryl Formates.

An efficient palladium-catalyzed carbonylation of aryl fluorosulfates with aryl formates for the facile synthesis of esters was developed. The cross-coupling reactions proceeded effectively in the presence of a palladium catalyst, phosphine ligand, and triethylamine in DMF to produce the corresponding esters in moderate to good yields. Of note, functionalities or substituents, such as nitro, cyano, methoxycarbonyl, trifluoromethyl, methylsulfonyl, trifluoromethoxy, fluoro, chloro, bromo, methyl, methoxy, N,N-dimethyl, and [1,3]dioxolyl, were well-tolerated in the reactions, which could be kept for late-stage modification. The reactions employing readily available and relatively robust aryl fluorosulfates as coupling electrophiles could potentially serve as an attractive alternative to traditional cross-couplings with the use of aryl halides and pseudohalides as substrates.

An Attempt to Replace Pure Citric Acid with Natural Lemon Juice during Potato Starch Esterification.

The application of chemical operations in food processing, in which pure chemical compounds are used to modify food ingredients, often raises social concerns. One of the most frequently modified dietary substances is starch, e.g., E1401-E1404, E1412-E1414, E1420, E1422, E1440, E1442, and E1450-E1452. An alternative solution to chemical treatments seems to be the use of raw materials naturally containing substrates applied for starch modification. Heating starch with a lemon juice concentrate can be considered a novel and effective method for producing starch citrate, which is part of the so-called "green chemistry". The modified preparations obtained as a result of potato starch esterification with natural lemon juice had a comparable degree of esterification to that of the esters produced with pure citric acid. In addition, the use of the juice doubled their resistance to amylolytic enzymes compared to the preparations made with pure acid. Replacing citric acid with lemon juice can facilitate the esterification process, and the analyzed properties of both types of modified preparations indicate that starch esters produced with pure citric acid can be successfully replaced by those produced using natural lemon juice, which may increase the social acceptance of these modified preparations.

Preparation of Hydrophobic Au Catalyst and Application in One-Step Oxidative Esterification of Methacrolein to Methyl Methacrylate.

The water produced during the oxidative esterification reaction occupies the active sites and reduces the activity of the catalyst. In order to reduce the influence of water on the reaction system, a hydrophobic catalyst was prepared for the one-step oxidative esterification of methylacrolein (MAL) and methanol. The catalyst was synthesized by loading the active component Au onto ZnO using the deposition-precipitation method, followed by constructing the silicon shell on Au/ZnO using tetraethoxysilane (TEOS) to introduce hydrophobic groups. Trimethylchlorosilane (TMCS) was used as a hydrophobic modification reagent to prepare hydrophobic catalysts, which exhibited a water droplet contact angle of 111.2°. At a temperature of 80 °C, the hydrophobic catalyst achieved a high MMA selectivity of over 95%. The samples were characterized using XRD, N2 adsorption, ICP, SEM, TEM, UV-vis, FT-IR, XPS, and water droplet contact angle measurements. Kinetic analysis revealed an activation energy of 22.44 kJ/mol for the hydrophobic catalyst.

Heterogeneous Brønsted Catalysis in the Solvent-Free and Multigram-Scale Synthesis of Polyalcohol Acrylates: The Case Study of Trimethylolpropane Triacrylate.

This article presents a thorough investigation into the synthesis of trimethylolpropane triacrylate (TMPTA) via the esterification reaction of trimethylolpropane (TMP) with acrylic acid using Amberlite™ 120 IR (H+), Amberlyst® 15, and Dowex™ 50WX8 resins as heterogeneous catalysts. Preliminary comparative tests explored the impact of air flow on water removal during the reaction and different acid-to-alcohol molar ratios (3:1, 6:1, or 9:1 mol:mol). The findings revealed that introducing air significantly enhances TMPTA yield and -OH group conversion, particularly at a 6:1 acid-to-alcohol molar ratio. Based on cost considerations, Amberlite™ 120 IR (H+) was selected as the preferred catalyst for further optimization. This included evaluating the effect of catalyst loading (10%, 5.0%, and 2.5% w/wtot) and assessing the impact of a pre-drying process on resin efficiency. The study concluded that optimal conditions did not necessitate drying, requiring 120 °C, a catalyst loading of 10% w/wtot, a 4 h reaction time, an acid:alcohol ratio of 6:1 mol:mol, the presence of MEHQ (0.1% mol/molAA), and air bubbling at 6 ± 1 Nl/h. Catalyst recycling was effectively implemented with a slight reduction in catalytic activity over consecutive runs. Furthermore, the study explored a scaled-up system with a mechanical stirrer, demonstrating the potential for multi-hundred grams scale-up. Considerations for optimizing the air flow stripping system are also highlighted. In summary, this study provides valuable insights into designing and optimizing the esterification process for TMPTA synthesis, laying the foundation for potential industrial applications.

Enzymatic Synthesis of Structured Lipids Enriched with Medium- and Long-Chain Triacylglycerols via Pickering Emulsion-Assisted Interfacial Catalysis: A Preliminary Exploration.

Medium- and long-chain triacylglycerol (MLCT), as a novel functional lipid, is valuable due to its special nutritional properties. Its low content in natural resources and inefficient synthesis during preparation have limited its practical applications. In this study, we developed an effective Pickering emulsion interfacial catalysis system (PE system) for the enzymatic synthesis of MLCT by trans-esterification. Lipase NS 40086 served simultaneously as a catalyst and a solid emulsifier to stabilize the Pickering emulsion. Benefitting from the sufficient oil-water interface, the obtained PE system exhibited outstanding catalytic efficiency, achieving 77.5% of MLCT content within 30 min, 26% higher than that of a water-free system. The Km value (0.259 mM) and activation energy (14.45 kJ mol-1) were 6.8-fold and 1.6-fold lower than those of the water-free system, respectively. The kinetic parameters as well as the molecular dynamics simulation and the tunnel analysis implied that the oil-water interface enhanced the binding between substrate and lipase and thus boosted catalytic efficiency. The conformational changes in the lipase were further explored by FT-IR. This method could give a novel strategy for enhancing lipase activity and the design of efficient catalytic systems to produce added-value lipids. This work will open a new methodology for the enzymatic synthesis of structured lipids.

Optimization of ultrasound-assisted pectin recovery from cocoa by-products using response surface methodology.

BACKGROUND: This study aimed to address the significant challenges associated with agricultural and cocoa waste disposal within the context of global food waste concerns. The magnitude of global food waste is staggering, estimated at 1.6 Gt of primary product equivalents, with 1.3 Gt attributed specifically to the edible parts of food. Focusing on cocoa waste, which constitutes around 80% of total cocoa production, management poses a considerable environmental challenge, with over 60% of this waste either burnt or left to rot in plantations. METHOD: Ultrasound-assisted extraction of pectin from cocoa pulp mucilage (CPM), cocoa pod husk (CPH), and cocoa bean shell (CBS) was achieved with a central composite design (CCD) using response surface methodology (RSM). RESULTS: Ultrasound-assisted extraction takes into consideration independent factors such as temperature, sonication time, pH, solid-liquid ratio, and ultrasonic power intensity. This study achieved the highest yield, anhydrouronic acid content, and degree of esterification under optimum conditions - sonication time of 20 min, pH of 2.5, solid-solvent ratio of 1:40 g mL-1, and ultrasonic power intensity of 64 W cm-2. The composition and characterization of pectin showed that its anhydrouronic acid content was 68.59 ± 0.2% when extracted from CPH, 50.7 ± 0.5% when extracted from CBS, and 43.97 ± 0.17% when extracted from CPM with citric acid. CONCLUSION: This study underscored the potential to reduce the environmental impact of cocoa waste, offering improved pectin extraction and sustainable methods for handling agricultural by-products. It is relevant for individuals interested in waste reduction and resource efficiency within the broader agricultural industry, showcasing the potential for practical and sustainable solutions in cocoa waste management. © 2024 Society of Chemical Industry.

Effects of different pretreatment methods on the degree of substitution, structure, and physicochemical properties of synthesized malic acid sweet potato starch ester.

BACKGROUND: The preparation of malic acid starch ester (MSE) is mostly carried out using a high temperature method, but there are problems such as high energy consumption, long preparation time, and uneven heating. Microwave technology can be used to overcome these limitations. The semi-crystalline structure of starch granules hinders the modifier's access to the matrix, thus limiting the esterification reaction. Physical techniques can act on the interior of the starch to create a number of active sites, thereby facilitating the reaction of the starch with esterification reagents. Therefore, this study investigated the effect of starch pretreatment by microwave, heat-moisture, and ultrasonic techniques on the degree of substitution (DS), structure, and physicochemical properties of MSE synthesized by the microwave method. RESULTS: The DS of MSE was increased after pretreatments. The modified starch obtained by different pretreatment methods did not show new characteristic peaks, while the MSE synthesized showed new absorption peaks near 1735 cm-1. The granular structure and morphology of the modified starch obtained by microwave and heat-moisture pretreatment were gelatinized and aggregated, while some of the starch particles of the modified starch obtained by ultrasonic pretreatment appeared pore-sized. The relative crystallinity and gelatinization enthalpy of the MSE were reduced, but the crystallization pattern remained as A-type. CONCLUSION: Overall, the results suggest that various pretreatment methods can enhance the DS of MSE by disrupting the structure of starch. The findings of this study provide theoretical support for improving the DS of esterified starch. © 2024 Society of Chemical Industry.

Physicochemical properties of esterified/crosslinked quinoa starches and their influence on bread quality.

BACKGROUND: Starch is the main component of quinoa seeds. However, quinoa starch has poor solubility in cold water and poor mechanical resistance and is easily aged, which limit its application. Therefore, modification of its structure to improve its functional properties is necessary. RESULTS: This research used acetic anhydride and sodium trimetaphosphate to modify the structure of starch molecules and investigated their influence on bread quality. The results showed that both esterification and crosslinking prevented the aggregation behavior of starch molecules. Moreover, they both decreased the gelatinization enthalpy change and relative crystallinity of the starch. Compared with native starch, modification significantly decreased the gelatinization temperature from 57.01 to 52.01 °C and the esterified starch exhibited the lowest enthalpy change with a 44.2% decrease. Modified starch increased the specific volume and decreased the hardness and chewiness of bread. Modification did not influence the moisture content in bread but impacted the water retention capacity, depending on the degree of modification. Low and medium degrees of modification improved the water retention capacity during storage. By contrast, a high degree of modification (10 g kg-1 crosslinking agent) decreased the water retention capacity. The dually modified quinoa starch (esterified and crosslinked) showed no influence on the textural properties of bread. CONCLUSION: This study demonstrated that both esterification and crosslinking significantly improved the functional properties of quinoa starch. Crosslinked or esterified quinoa starches have the potential to improve the textural properties of bakery products. © 2024 Society of Chemical Industry.