Moth resonant mechanics are tuned to wingbeat frequency and energetic demands.

An insect's wingbeat frequency is a critical determinant of its flight performance and varies by multiple orders of magnitude across Insecta. Despite potential energetic benefits for an insect that matches its wingbeat frequency to its resonant frequency, recent work has shown that moths may operate off their resonant peak. We hypothesized that across species, wingbeat frequency scales with resonance frequency to maintain favourable energetics, but with an offset in species that use frequency modulation as a means of flight control. The moth superfamily Bombycoidea is ideal for testing this hypothesis because their wingbeat frequencies vary across species by an order of magnitude, despite similar morphology and actuation. We used materials testing, high-speed videography and a model of resonant aerodynamics to determine how components of an insect's flight apparatus (stiffness, wing inertia, muscle strain and aerodynamics) vary with wingbeat frequency. We find that the resonant frequency of a moth correlates with wingbeat frequency, but resonance curve shape (described by the Weis-Fogh number) and peak location vary within the clade in a way that corresponds to frequency-dependent biomechanical demands. Our results demonstrate that a suite of adaptations in muscle, exoskeleton and wing drive variation in resonant mechanics, reflecting potential constraints on matching wingbeat and resonant frequencies.

Early robotic gait training after stroke (ERA Stroke): study protocol for a randomized clinical trial.

BACKGROUND: Walking impairment after stroke is associated with substantial limitations in functional independence, quality of life, and long-term survival. People in the subacute phase after stroke who are unable to walk are most likely to benefit the greatest from use of overground robotic gait training (RGT). This study will provide preliminary evidence regarding the clinical use and efficacy of RGT during the subacute phase of stroke recovery as well as observational findings associated with the safety, tolerability, feasibility, and cost of delivering RGT during inpatient stroke rehabilitation. METHODS: This prospectively registered randomized controlled trial will enroll 54 patients admitted to inpatient rehabilitation within six months of stroke. Admitted patients will be screened at admission to inpatient rehabilitation for eligibility. Consented patients will be randomized based on stroke severity to receive either RGT or usual care for 90 minutes per week of gait training intervention during inpatient rehabilitation length of stay. Patients will complete assessments on walking and health outcomes at admission and discharge from inpatient rehabilitation and at 1- and 3-month follow-up. Intent-to-treat and per protocol analysis will be performed to evaluate safety [rate of adverse events, visual analog scale, and treatment completion rate], walking function [gait speed via 10-Meter Walk Test, Functional Ambulation Category, gait endurance via 6-Minute Walk Test] and health outcomes [Modified Rankin Scale, Stroke Rehabilitation Assessment of Movement, Continuity Assessment Record and Evaluation Tool, 5 Times Sit-to-Stand Test, Berg Balance Scale, and Stroke Impact Scale-16], and cost-analysis. DISCUSSION: This study will provide foundational evidence regarding the clinical use and efficacy of a RGT program during the subacute phase of stroke recovery with specific findings associated with the safety, tolerability, feasibility, and cost-analysis of delivering RGT during inpatient stroke rehabilitation. TRIAL REGISTRATION: NCT06430632.

A novel exoskeletal-derived C-type lectin facilitates phagocytosis of hemocytes in the oriental river prawn Macrobrachium nipponense.

C-type lectins (CTLs) execute critical functions in multiple immune responses of crustaceans as a member of pattern recognition receptors (PRRs) family. In this study, a novel CTL was identified from the exoskeleton of the oriental river prawn Macrobrachium nipponense (MnLec3). The full-length cDNA of MnLec3 was 1150 bp with an open reading frame of 723 bp, encoding 240 amino acids. MnLec3 protein contained a signal peptide and one single carbohydrate-recognition domain (CRD). MnLec3 transcripts were widely distributed at the exoskeleton all over the body. Significant up-regulation of MnLec3 in exoskeleton after Aeromonas hydrophila challenged suggested the involvement of MnLec3 as well as the possible function of the exoskeleton in immune response. In vitro tests with recombinant MnLec3 protein (rMnLec3) manifested that it had polysaccharide binding activity, a wide spectrum of bacterial binding activity and agglutination activity only for tested Gram-negative bacteria (Escherichia coli, Vibrio anguillarum and A. hydrophila). Moreover, rMnLec3 significantly promoted phagocytic ability of hemocytes against A. hydrophila in vivo. What's more, MnLec3 interference remarkably impaired the survivability of the prawns when infected with A. hydrophila. Collectively, these results ascertained that MnLec3 derived from exoskeleton took an essential part in immune defense of the prawns against invading bacteria as a PRR.

Investigations of motor performance with neuromodulation and exoskeleton using leader-follower modality: a tDCS study.

This study investigates how the combination of robot-mediated haptic interaction and cerebellar neuromodulation can improve task performance and promote motor skill development in healthy individuals using a robotic exoskeleton worn on the index finger. The authors propose a leader-follower type of mirror game where participants can follow a leader in a two-dimensional virtual reality environment while the exoskeleton tracks the index finger motion using an admittance filter. The game requires two primary learning phases: the initial phase focuses on mastering the pinching interface, while the second phase centers on predicting the leader's movements. Cerebral transcranial direct current stimulation (tDCS) with anodal polarity is applied to the subjects during the game. It is shown that the subjects' performance improves as they play the game. The combination of tDCS with finger exoskeleton significantly enhances task performance. Our research indicates that modulation of the cerebellum during the mirror game improves the motor skills of healthy individuals. The results also indicate potential uses for motor neurorehabilitation in hemiplegia patients.

The efficacy of hybrid neuroprostheses in the rehabilitation of upper limb impairment after stroke, a narrative and systematic review with a meta-analysis.

BACKGROUND: Paresis of the upper limb (UL) is the most frequent impairment after a stroke. Hybrid neuroprostheses, i.e., the combination of robots and electrical stimulation, have emerged as an option to treat these impairments. METHODS: To give an overview of existing devices, their features, and how they are linked to clinical metrics, four different databases were systematically searched for studies on hybrid neuroprostheses for UL rehabilitation after stroke. The evidence on the efficacy of hybrid therapies was synthesized. RESULTS: Seventy-three studies were identified, introducing 32 hybrid systems. Among the most recent devices (n = 20), most actively reinforce movement (3 passively) and are typical exoskeletons (3 end-effectors). If classified according to the International Classification of Functioning, Disability and Health, systems for proximal support are expected to affect body structures and functions, while the activity and participation level are targeted when applying Functional Electrical Stimulation distally plus the robotic component proximally. The meta-analysis reveals a significant positive effect on UL functions (p < 0.001), evident in a 7.8-point Mdiff between groups in the Fugl-Meyer assessment. This positive effect remains at the 3-month follow-up (Mdiff = 8.4, p < 0.001). CONCLUSIONS: Hybrid neuroprostheses have a positive effect on UL recovery after stroke, with effects persisting at least three months after the intervention. Non-significant studies were those with the shortest intervention periods and the oldest patients. Improvements in UL functions are not only present in the subacute phase after stroke but also in long-term chronic stages. In addition to further technical development, more RCTs are needed to make assumptions about the determinants of successful therapy.

A Novel Gait Event Detection Algorithm Using a Thigh-Worn Inertial Measurement Unit and Joint Angle Information.

This paper describes the development and evaluation of a novel, threshold-based gait event detection algorithm utilizing only one thigh inertial measurement unit (IMU) and unilateral, sagittal plane hip and knee joint angles. The algorithm was designed to detect heel strike (HS) and toe off (TO) gait events, with the eventual goal of detection in a real-time exoskeletal control system. The data used in the development and evaluation of the algorithm were obtained from two gait databases, each containing synchronized IMU and ground reaction force (GRF) data. All database subjects were healthy individuals walking in either a level-ground, urban environment or a treadmill lab environment. Inertial measurements used were three-dimensional thigh accelerations and three-dimensional thigh angular velocities. Parameters for the TO algorithm were identified on a per-subject basis. The GRF data were utilized to validate the algorithm's timing accuracy and quantify the fidelity of the algorithm, measured by the F1-Score. Across all participants, the algorithm reported a mean timing error of -41±20 ms with an F1-Score of 0.988 for HS. For TO, the algorithm reported a mean timing error of -1.4±21 ms with an F1-Score of 0.991. The results of this evaluation suggest that this algorithm is a promising solution to inertial based gait event detection; however, further refinement and real-time evaluation are required for use in exoskeletal control.

Powered single hip joint exoskeletons for gait rehabilitation: a systematic review and Meta-analysis.

BACKGROUND: Gait disorders and as a consequence, robotic rehabilitation techniques are becoming increasingly prevalent as the population ages. In the area of rehabilitation robotics, using lightweight single hip joint exoskeletons are of significance. Considering no prior systematic review article on clinical outcomes, we aim to systematically review powered hip exoskeletons in terms of gait parameters and metabolic expenditure effects. METHODS: Three databases of PubMed, Scopus, and Web of science were searched for clinical articles comparing outcomes of gait rehabilitation using hip motorized exoskeleton with conventional methods, on patients with gait disorder or healthy individuals. Of total number of 37 reviewed articles, 14 trials were quantitatively analyzed. Analyses performed in terms of gait spatiotemporal parameters like speed (self-speed and maximum speed), step length, stride length, cadence, and oxygen consumption. RESULTS: Improved clinical outcomes of gait spatiotemporal parameters with hip joint exoskeletons are what our review's findings show. In terms of gait values, meta-analysis indicates that rehabilitation with single hip joint exoskeleton enhanced parameters of maximum speed by 0.13 m/s (0.10-0.17) and step length by 0.06 m (0.05-0.07). For the remaining investigated gait parameters, no statistically significant difference was observed. Regarding metabolic parameters, oxygen consumption was lower in individuals treated with hip exoskeleton (- 1.23 ml/min/kg; range - 2.13 to - 0.32). CONCLUSION: Although the analysis demonstrated improvement with just specific gait measures utilizing powered hip exoskeletons, the lack of improvement in all parameters is likely caused by the high patient condition heterogeneity among the evaluated articles. We also noted in patients who rehabilitated with the hip exoskeleton, the oxygen cost was lower. More randomized controlled trials are needed to verify both the short- and long-term clinical outcomes, including patient-reported measures. LEVEL OF EVIDENCE: Level I (systematic review and meta-analysis).

Microstructural design for mechanical-optical multifunctionality in the exoskeleton of the flower beetle Torynorrhina flammea.

Biological systems have a remarkable capability of synthesizing multifunctional materials that are adapted for specific physiological and ecological needs. When exploring structure-function relationships related to multifunctionality in nature, it can be a challenging task to address performance synergies, trade-offs, and the relative importance of different functions in biological materials, which, in turn, can hinder our ability to successfully develop their synthetic bioinspired counterparts. Here, we investigate such relationships between the mechanical and optical properties in a multifunctional biological material found in the highly protective yet conspicuously colored exoskeleton of the flower beetle, Torynorrhina flammea Combining experimental, computational, and theoretical approaches, we demonstrate that a micropillar-reinforced photonic multilayer in the beetle's exoskeleton simultaneously enhances mechanical robustness and optical appearance, giving rise to optical damage tolerance. Compared with plain multilayer structures, stiffer vertical micropillars increase stiffness and elastic recovery, restrain the formation of shear bands, and enhance delamination resistance. The micropillars also scatter the reflected light at larger polar angles, enhancing the first optical diffraction order, which makes the reflected color visible from a wider range of viewing angles. The synergistic effect of the improved angular reflectivity and damage localization capability contributes to the optical damage tolerance. Our systematic structural analysis of T. flammea's different color polymorphs and parametric optical and mechanical modeling further suggest that the beetle's microarchitecture is optimized toward maximizing the first-order optical diffraction rather than its mechanical stiffness. These findings shed light on material-level design strategies utilized in biological systems for achieving multifunctionality and could thus inform bioinspired material innovations.

Safety and practicality study of using an exoskeleton in acute neurosurgery patients.

INTRODUCTION: Early mobilization is key in neurologically impaired persons, limiting complications and improving long-term recovery. Self-balanced exoskeletons are used in rehabilitation departments to help patients stand and walk. We report the first case series of exoskeleton use in acute neurosurgery and intensive care patients, evaluating safety, clinical feasibility and patients' satisfaction. METHODS: We report a retrospective observational study including individuals hospitalized in the neurosurgical intensive care and neurosurgery departments. We included patients with a medical prescription for an exoskeleton session, and who met no contraindication. Patients benefited from standing sessions using a self-balanced exoskeleton (Atalante, Wandercraft, France). Patients and sessions data were collected. Safety, feasibility and adherence were evaluated. RESULTS: Seventeen patients were scheduled for 70 standing sessions, of which 27 (39%) were completed. They were typically hospitalized for intracranial hemorrhage (74%) and presented with unilateral motor impairments, able to stand but with very insufficient weight shifting to the hemiplegic limb, requiring support (MRC 36.2 ± 3.70, SPB 2.0 ± 1.3, SPD 0.7 ± 0.5). The average duration of standing sessions was 16 ± 9 min. The only side effect was orthostatic hypotension (18.5%), which resolved with returning to seating position. The most frequent reason for not completing a session was understaffing (75%). All patients were satisfied and expressed a desire to repeat it. CONCLUSIONS: Physiotherapy using the exoskeleton is safe and feasible in the acute neurosurgery setting, although it requires adaptation from the staff to organize the sessions. An efficacy study is ongoing to evaluate the benefits for the patients.

Feasibility of overground exoskeleton gait training during inpatient rehabilitation after severe acquired brain injury.

OBJECTIVE: To describe the safety, feasibility, and tolerability of overground exoskeleton gait training (OEGT) integrated into clinical practice for patients after severe acquired brain injury (ABI). SETTING: Inpatient rehabilitation hospital. PARTICIPANTS: Eligible patients with severe ABI met the following criteria: age > 18, medically stable, met exoskeleton frame limitations, and a score of ≤ 3 on the motor function portion of the Coma Recovery Scale - Revised (CRS-R). Presence of consciousness disorder was not exclusionary. DESIGN: Prospective observational study. MAIN MEASURES: Outcomes examined safety (adverse events), feasibility (session count and barriers to session completion), and tolerability of OEGT (session metrics and heart rate). RESULTS: Ten patients with ABI completed 10.4 ± 4.8 OEGT sessions with no adverse events. Barriers to session completion included clinical focus on prioritized interventions. Sessions [median up time = 17 minutes, (IQR: 7); walk time = 13 minutes, (IQR: 9); step count = 243, (IQR: 161); device assist = 74, (IQR: 28.0)] were primarily spent in Very Light to Light heart rate intensities [89%, (IQR: 42%) and 9%, (IQR: 33%), respectively]. CONCLUSION: OEGT incorporated into the rehabilitation plan of care during inpatient rehabilitation after severe ABI was observed to be safe, feasible, and tolerable. However, intentional steps must be taken to facilitate patient safety.

Human-exoskeleton interaction portrait.

Human-robot physical interaction contains crucial information for optimizing user experience, enhancing robot performance, and objectively assessing user adaptation. This study introduces a new method to evaluate human-robot interaction and co-adaptation in lower limb exoskeletons by analyzing muscle activity and interaction torque as a two-dimensional random variable. We introduce the interaction portrait (IP), which visualizes this variable's distribution in polar coordinates. We applied IP to compare a recently developed hybrid torque controller (HTC) based on kinematic state feedback and a novel adaptive model-based torque controller (AMTC) with online learning, proposed herein, against a time-based controller (TBC) during treadmill walking at varying speeds. Compared to TBC, both HTC and AMTC significantly lower users' normalized oxygen uptake, suggesting enhanced user-exoskeleton coordination. IP analysis reveals that this improvement stems from two distinct co-adaptation strategies, unidentifiable by traditional muscle activity or interaction torque analyses alone. HTC encourages users to yield control to the exoskeleton, decreasing overall muscular effort but increasing interaction torque, as the exoskeleton compensates for user dynamics. Conversely, AMTC promotes user engagement through increased muscular effort and reduces interaction torques, aligning it more closely with rehabilitation and gait training applications. IP phase evolution provides insight into each user's interaction strategy formation, showcasing IP analysis's potential in comparing and designing novel controllers to optimize human-robot interaction in wearable robots.

Soft pneumatic actuators for pushing fingers into extension.

BACKGROUND: Compliant pneumatic actuators possess many characteristics that are desirable for wearable robotic systems. These actuators can be lightweight, integrated with clothing, and accommodate uncontrolled degrees of freedom. These attributes are especially desirable for hand exoskeletons, where the soft actuator can conform to the highly variable digit shape. In particular, locating the pneumatic actuator on the palmar side of the digit may have benefits for assisting finger extension and resisting unwanted finger flexion, but this configuration requires suppleness to allow digit flexion while retaining sufficient stiffness to assist extension. METHODS: To meet these needs, we designed an actuator consisting of a hollow chamber long enough to span the joints of each digit while sufficiently narrow not to inhibit finger adduction. We explored the geometrical design parameter space for this chamber in terms of shape, dimensions, and wall thickness. After fabricating an elastomer-based prototype for each actuator design, we measured active extension force and passive resistance to bending for each chamber using a mechanical jig. We also created a finite element model for each chamber to enable estimation of the impact of chamber deformation, caused by joint rotation, on airflow through the chamber. Finally, we created a prototype hand exoskeleton with the chamber parameters yielding the best outcomes. RESULTS: A rectangular cross-sectional area was preferable to a semi-obround shape for the chamber; wall thickness also impacted performance. Extension joint torque reached 0.33 N-m at a low chamber pressure of 48.3 kPa. The finite element model confirmed that airflow for the rectangular chamber remained high despite deformation resulting from joint rotation. The hand exoskeleton created with the rectangular chambers enabled rapid movement, with a cycle time of 1.1 s for voluntary flexion followed by actuated extension. CONCLUSIONS: The developed soft actuators are feasible for use in promoting finger extension from the palmar side of the hand. This placement utilizes pushing rather than pulling for digit extension, which is more comfortable and safer. The small chamber volumes allow rapid filling and evacuation to facilitate relatively high frequency finger movements.

Safety & efficacy of a robotic hip exoskeleton on outpatient stroke rehabilitation.

OBJECTIVE: The objective of this study was to analyze the safety and efficacy of using a robotic hip exoskeleton designed by Samsung Electronics Co., Ltd., Korea, called the Gait Enhancing and Motivating System-Hip (GEMS-H), in assistance mode only with the poststroke population in an outpatient-rehabilitation setting. METHODS: Forty-one participants with an average age of 60 and average stroke latency of 6.5 years completed this prospective, single arm, interventional, longitudinal study during the COVID-19 pandemic. Significant modifications to the traditional outpatient clinical environment were made to adhere to organizational physical distancing policies as well as guidelines from the Centers for Disease Control. All participants received gait training with the GEMS-H in assistance mode for 18 training sessions over the course of 6-8 weeks. Performance-based and self-reported clinical outcomes were assessed at four time points: baseline, midpoint (after 9 training sessions), post (after 18 training sessions), and 1-month follow up. Daily step count was also collected throughout the duration of the study using an ankle-worn actigraphy device. Additionally, corticomotor excitability was measured at baseline and post for 4 bilateral lower limb muscles using transcranial magnetic stimulation. RESULTS: By the end of the training program, the primary outcome, walking speed, improved by 0.13 m/s (p < 0.001). Secondary outcomes of walking endurance, balance, and functional gait also improved as measured by the 6-Minute Walk Test (47 m, p < 0.001), Berg Balance Scale (2.93 points, p < 0.001), and Functional Gait Assessment (1.80 points, p < 0.001). Daily step count significantly improved with and average increase of 1,750 steps per day (p < 0.001). There was a 35% increase in detectable lower limb motor evoked potentials and a significant decrease in the active motor threshold in the medial gastrocnemius (-5.7, p < 0.05) after training with the device. CONCLUSIONS: Gait training with the GEMS-H exoskeleton showed significant improvements in walking speed, walking endurance, and balance in persons with chronic stroke. Day-to-day activity also improved as evidenced by increased daily step count. Additionally, corticomotor excitability changes suggest that training with this device may help correct interhemispheric imbalance typically seen after stroke. TRIAL REGISTRATION: This study is registered with ClinicalTrials.gov (NCT04285060).

Exoskeleton-based exercises for overground gait and balance rehabilitation in spinal cord injury: a systematic review of dose and dosage parameters.

BACKGROUND: Exoskeletons are increasingly applied during overground gait and balance rehabilitation following neurological impairment, although optimal parameters for specific indications are yet to be established. OBJECTIVE: This systematic review aimed to identify dose and dosage of exoskeleton-based therapy protocols for overground locomotor training in spinal cord injury/disease. METHODS: A systematic review was conducted in accordance with the Preferred Reporting Items Systematic Reviews and Meta-Analyses guidelines. A literature search was performed using the CINAHL Complete, Embase, Emcare Nursing, Medline ALL, and Web of Science databases. Studies in adults with subacute and/or chronic spinal cord injury/disease were included if they reported (1) dose (e.g., single session duration and total number of sessions) and dosage (e.g., frequency of sessions/week and total duration of intervention) parameters, and (2) at least one gait and/or balance outcome measure. RESULTS: Of 2,108 studies identified, after removing duplicates and filtering for inclusion, 19 were selected and dose, dosage and efficacy were abstracted. Data revealed a great heterogeneity in dose, dosage, and indications, with overall recommendation of 60-min sessions delivered 3 times a week, for 9 weeks in 27 sessions. Specific protocols were also identified for functional restoration (60-min, 3 times a week, for 8 weeks/24 sessions) and cardiorespiratory rehabilitation (60-min, 3 times a week, for 12 weeks/36 sessions). CONCLUSION: This review provides evidence-based best practice recommendations for overground exoskeleton training among individuals with spinal cord injury/disease based on individual therapeutic goals - functional restoration or cardiorespiratory rehabilitation. There is a need for structured exoskeleton clinical translation studies based on standardized methods and common therapeutic outcomes.

Brain-machine interface based on deep learning to control asynchronously a lower-limb robotic exoskeleton: a case-of-study.

BACKGROUND: This research focused on the development of a motor imagery (MI) based brain-machine interface (BMI) using deep learning algorithms to control a lower-limb robotic exoskeleton. The study aimed to overcome the limitations of traditional BMI approaches by leveraging the advantages of deep learning, such as automated feature extraction and transfer learning. The experimental protocol to evaluate the BMI was designed as asynchronous, allowing subjects to perform mental tasks at their own will. METHODS: A total of five healthy able-bodied subjects were enrolled in this study to participate in a series of experimental sessions. The brain signals from two of these sessions were used to develop a generic deep learning model through transfer learning. Subsequently, this model was fine-tuned during the remaining sessions and subjected to evaluation. Three distinct deep learning approaches were compared: one that did not undergo fine-tuning, another that fine-tuned all layers of the model, and a third one that fine-tuned only the last three layers. The evaluation phase involved the exclusive closed-loop control of the exoskeleton device by the participants' neural activity using the second deep learning approach for the decoding. RESULTS: The three deep learning approaches were assessed in comparison to an approach based on spatial features that was trained for each subject and experimental session, demonstrating their superior performance. Interestingly, the deep learning approach without fine-tuning achieved comparable performance to the features-based approach, indicating that a generic model trained on data from different individuals and previous sessions can yield similar efficacy. Among the three deep learning approaches compared, fine-tuning all layer weights demonstrated the highest performance. CONCLUSION: This research represents an initial stride toward future calibration-free methods. Despite the efforts to diminish calibration time by leveraging data from other subjects, complete elimination proved unattainable. The study's discoveries hold notable significance for advancing calibration-free approaches, offering the promise of minimizing the need for training trials. Furthermore, the experimental evaluation protocol employed in this study aimed to replicate real-life scenarios, granting participants a higher degree of autonomy in decision-making regarding actions such as walking or stopping gait.

A new modular neuroprosthesis suitable for hybrid FES-robot applications and tailored assistance.

BACKGROUND: To overcome the application limitations of functional electrical stimulation (FES), such as fatigue or nonlinear muscle response, the combination of neuroprosthetic systems with robotic devices has been evaluated, resulting in hybrid systems that have promising potential. However, current technology shows a lack of flexibility to adapt to the needs of any application, context or individual. The main objective of this study is the development of a new modular neuroprosthetic system suitable for hybrid FES-robot applications to meet these needs. METHODS: In this study, we conducted an analysis of the requirements for developing hybrid FES-robot systems and reviewed existing literature on similar systems. Building upon these insights, we developed a novel modular neuroprosthetic system tailored for hybrid applications. The system was specifically adapted for gait assistance, and a technological personalization process based on clinical criteria was devised. This process was used to generate different system configurations adjusted to four individuals with spinal cord injury or stroke. The effect of each system configuration on gait kinematic metrics was analyzed by using repeated measures ANOVA or Friedman's test. RESULTS: A modular NP system has been developed that is distinguished by its flexibility, scalability and personalization capabilities. With excellent connection characteristics, it can be effectively integrated with robotic devices. Its 3D design facilitates fitting both as a stand-alone system and in combination with other robotic devices. In addition, it meets rigorous requirements for safe use by incorporating appropriate safety protocols, and features appropriate battery autonomy, weight and dimensions. Different technological configurations adapted to the needs of each patient were obtained, which demonstrated an impact on the kinematic gait pattern comparable to that of other devices reported in the literature. CONCLUSIONS: The system met the identified technical requirements, showcasing advancements compared to systems reported in the literature. In addition, it demonstrated its versatility and capacity to be combined with robotic devices forming hybrids, adapting well to the gait application. Moreover, the personalization procedure proved to be useful in obtaining various system configurations tailored to the diverse needs of individuals.

Simulation of a control method for active kinesiotherapy with an upper extremity rehabilitation exoskeleton without force sensor.

Exoskeleton-aided active rehabilitation is a process that requires sensing and acting upon the motion intentions of the user. Typically, force sensors are used for this. However, they increase the weight and cost of these wearable devices. This paper presents the methodology for detecting users' intentions only with encoders integrated with the drives. It is unique compared to other algorithms, as enables active kinesiotherapy while adding no sensory systems. The method is based on comparing the measured motion with the one computed with the idealised model of the multibody system. The investigation assesses the method's performance and its robustness to model and measurement inaccuracies, as well as patients' unintended motions. Moreover, the PID parameters are selected to provide the optimal regulation based on the dynamics requirements. The research proves the presented concept of the control approach. For all the tests with the final settings, the system reacts to a change in the user's intention below one second and minimises the changes in proportion between the system's acceleration and the generated user's joint torque. The results are comparable to those obtained by EMG-based systems and significantly better than low-cost force sensors.

Human-centered design of a novel soft exosuit for post-stroke gait rehabilitation.

BACKGROUND: Stroke remains a major cause of long-term adult disability in the United States, necessitating the need for effective rehabilitation strategies for post-stroke gait impairments. Despite advancements in post-stroke care, existing rehabilitation often falls short, prompting the development of devices like robots and exoskeletons. However, these technologies often lack crucial input from end-users, such as clinicians, patients, and caregivers, hindering their clinical utility. Employing a human-centered design approach can enhance the design process and address user-specific needs. OBJECTIVE: To establish a proof-of-concept of the human-centered design approach by refining the NewGait® exosuit device for post-stroke gait rehabilitation. METHODS: Using iterative design sprints, the research focused on understanding the perspectives of clinicians, stroke survivors, and caregivers. Two design sprints were conducted, including empathy interviews at the beginning of the design sprint to integrate end-users' insights. After each design sprint, the NewGait device underwent refinements based on emerging issues and recommendations. The final prototype underwent mechanical testing for durability, biomechanical simulation testing for clinical feasibility, and a system usability evaluation, where the new stroke-specific NewGait device was compared with the original NewGait device and a commercial product, Theratogs®. RESULTS: Affinity mapping from the design sprints identified crucial categories for stakeholder adoption, including fit for females, ease of donning and doffing, and usability during barefoot walking. To address these issues, a system redesign was implemented within weeks, incorporating features like a loop-backed neoprene, a novel closure mechanism for the shoulder harness, and a hook-and-loop design for the waist belt. Additional improvements included reconstructing anchors with rigid hook materials and replacing latex elastic bands with non-latex silicone-based bands for enhanced durability. Further, changes to the dorsiflexion anchor were made to allow for barefoot walking. Mechanical testing revealed a remarkable 10-fold increase in durability, enduring 500,000 cycles without notable degradation. Biomechanical simulation established the modularity of the NewGait device and indicated that it could be configured to assist or resist different muscles during walking. Usability testing indicated superior performance of the stroke-specific NewGait device, scoring 84.3 on the system usability scale compared to 62.7 for the original NewGait device and 46.9 for Theratogs. CONCLUSION: This study successfully establishes the proof-of-concept for a human-centered design approach using design sprints to rapidly develop a stroke-specific gait rehabilitation system. Future research should focus on evaluating the clinical efficacy and effectiveness of the NewGait device for post-stroke rehabilitation.

Exploring Human-Exoskeleton Interaction Dynamics: An In-Depth Analysis of Knee Flexion-Extension Performance across Varied Robot Assistance-Resistance Configurations.

Knee rehabilitation therapy after trauma or neuromotor diseases is fundamental to restore the joint functions as best as possible, exoskeleton robots being an important resource in this context, since they optimize therapy by applying tailored forces to assist or resist movements, contributing to improved patient outcomes and treatment efficiency. One of the points that must be taken into account when using robots in rehabilitation is their interaction with the patient, which must be safe for both and guarantee the effectiveness of the treatment. Therefore, the objective of this study was to assess the interaction between humans and an exoskeleton during the execution of knee flexion-extension movements under various configurations of robot assistance and resistance. The evaluation encompassed considerations of myoelectric activity, muscle recruitment, robot torque, and performed movement. To achieve this, an experimental protocol was implemented, involving an individual wearing the exoskeleton and executing knee flexion-extension motions while seated, with the robot configured in five distinct modes: passive (P), assistance on flexion (FA), assistance on extension (EA), assistance on flexion and extension (CA), and resistance on flexion and extension (CR). Results revealed distinctive patterns of movement and muscle recruitment for each mode, highlighting the complex interplay between human and robot; for example, the largest RMS tracking errors were for the EA mode (13.72 degrees) while the smallest for the CR mode (4.47 degrees), a non-obvious result; in addition, myoelectric activity was demonstrated to be greater for the completely assisted mode than without the robot (the maximum activation levels for the vastus medialis and vastus lateralis muscles were more than double those when the user had assistance from the robot). Tracking errors, muscle activations, and torque values varied across modes, emphasizing the need for careful consideration in configuring exoskeleton assistance and resistance to ensure effective and safe rehabilitation. Understanding these human-robot interactions is essential for developing precise rehabilitation programs, optimizing treatment effectiveness, and enhancing patient safety.

Design, Simulation and Functional Testing of a Novel Ankle Exoskeleton with 3DOFs.

This paper presents a study on developing a new exoskeleton for ankle joint rehabilitation with three degrees of freedom (3 DOFs). The primary attention is paid to the process of designing and modelling the device aimed at restoring the lost functions of joint mobility. The authors conducted a complex analysis of the functional requirements of the exoskeleton based on research into the potential user's needs, which allowed for the development of a conceptual model of the proposed device. In this study, a prototype of the exoskeleton is designed using modern additive technologies. The prototype underwent virtual testing in conditions maximally close to reality, which confirmed its effectiveness and comfort of use. The main results of this study indicate the promising potential of the proposed solution for application in rehabilitation practices, especially for patients with ankle joint injuries and diseases.