When you look at your past: Eye movement during autobiographical retrieval.

Until recently, little was known about whether or how autobiographical memory (i.e., memory of personal information) activates eye movement. This issue is now being addressed by several studies demonstrating not only how autobiographical memory activates eye movement, but also how eye movement influences the characteristics of autobiographical retrieval. This paper summarizes this research and presents a hypothesis according to which fixations and saccades during autobiographical retrieval mirror the construction of the visual image of the retrieved event. This hypothesis suggests that eye movements during autobiographical retrieval mirror the attempts of the visual system to generate and manipulate mental representations of autobiographical retrieval. It offers a theoretical framework for a burgeoning area of research that provides a rigorous behavioral evaluation of the phenomenological experience of memory.

Emotion processing in concrete and abstract words: evidence from eye fixations during reading.

We replicated and extended the findings of Yao et al. [(2018). Differential emotional processing in concrete and abstract words. Journal of Experimental Psychology: Learning, Memory, and Cognition, 44(7), 1064-1074] regarding the interaction of emotionality, concreteness, and imageability in word processing by measuring eye fixation times on target words during normal reading. A 3 (Emotion: negative, neutral, positive) × 2 (Concreteness: abstract, concrete) design was used with 22 items per condition, with each set of six target words matched across conditions in terms of word length and frequency. Abstract (e.g. shocking, reserved, fabulous) and concrete (e.g. massacre, calendar, treasure) target words appeared (separately) within contextually neutral, plausible sentences. Sixty-three participants each read all 132 experimental sentences while their eye movements were recorded. Analyses using Gamma generalised linear mixed models revealed significant effects of both Emotion and Concreteness on all fixation measures, indicating faster processing for emotional and concrete words. Additionally, there was a significant Emotion × Concreteness interaction which, critically, was modulated by Imageability in early fixation time measures. Emotion effects were significantly larger in higher-imageability abstract words than in lower-imageability ones, but remained unaffected by imageability in concrete words. These findings support the multimodal induction hypothesis and highlight the intricate interplay of these factors in the immediate stages of word processing during fluent reading.

The effect of distal locking mode on postoperative mechanical complications in intertrochanteric fractures: a retrospective cohort study of five hundred and seven patients.

PURPOSE: The optimal choice of distal locking modes remains a subject due to limited available data, and therefore, this study aims to investigate the relationship between distal locking mode and postoperative mechanical complications in an intertrochanteric fracture (ITF) population who underwent closed reduction and intramedullary fixation with a PFNA-II. METHODS: Patients aged 65 years or older who underwent surgery with PFNA-II fixation in a university teaching hospital between January 2020 and December 2021 were potentially eligible. Based on the distal locking mode, patients were classified into static, dynamic, and limited dynamic groups, among which the differences were tested using univariate analysis. Multivariate logistic regression was used to examine whether the distal locking mode was independently associated with the risk of postoperative one year mechanical complications, adjusting for covariates and potential confounders. Subgroup analyses were performed to evaluate the robustness of the findings. RESULT: Among 507 eligible patients, 33 (6.5%) developed postoperative mechanical complications. In the univariate analysis, sex (P = 0.007), fracture type (P = 0.020), LAT Parker ratio (P = 0.023), and lateral femoral (P = 0.003) wall showed that the differences were significant. Compared to the static group, the limited dynamic group and the dynamic group showed higher odds of postoperative mechanical complications (OR = 3.314, 95% CI: 1.215-9.041; and OR = 3.652, 95% CI: 1.451-9.191, respectively). These associations were robust across a series of analyses, including adjusting for confounders and subgroup analyses. CONCLUSION: Using a distal non-static locking mode significantly increases the risk of postoperative mechanical complications, and static locking could be a preferable option when treating an intertrochanteric fracture.

Strategies for enhancing automatic fixation detection in head-mounted eye tracking.

Moving through a dynamic world, humans need to intermittently stabilize gaze targets on their retina to process visual information. Overt attention being thus split into discrete intervals, the automatic detection of such fixation events is paramount to downstream analysis in many eye-tracking studies. Standard algorithms tackle this challenge in the limiting case of little to no head motion. In this static scenario, which is approximately realized for most remote eye-tracking systems, it amounts to detecting periods of relative eye stillness. In contrast, head-mounted eye trackers allow for experiments with subjects moving naturally in everyday environments. Detecting fixations in these dynamic scenarios is more challenging, since gaze-stabilizing eye movements need to be reliably distinguished from non-fixational gaze shifts. Here, we propose several strategies for enhancing existing algorithms developed for fixation detection in the static case to allow for robust fixation detection in dynamic real-world scenarios recorded with head-mounted eye trackers. Specifically, we consider (i) an optic-flow-based compensation stage explicitly accounting for stabilizing eye movements during head motion, (ii) an adaptive adjustment of algorithm sensitivity according to head-motion intensity, and (iii) a coherent tuning of all algorithm parameters. Introducing a new hand-labeled dataset, recorded with the Pupil Invisible glasses by Pupil Labs, we investigate their individual contributions. The dataset comprises both static and dynamic scenarios and is made publicly available. We show that a combination of all proposed strategies improves standard thresholding algorithms and outperforms previous approaches to fixation detection in head-mounted eye tracking.

Postoperative 3D computed tomographic evaluation of 92 calcaneal fracture reduction using the sinus tarsi technique and fixation with 3.5 mm cortical screws.

BACKGROUND: Fixation of calcaneus through the sinus tarsi approach is increasingly popular due to the lower rate of wound complications. The use of postoperative CT provided a better evaluation tool than using plain radiography. Our objective of the present study is to evaluate the quality of fracture reductions by postoperative 3D CT scans after surgical intervention using the sinus tarsi approach and fixation with 3.5 cortical screws. METHODS: Between January 2018 and April 2020, 86 consecutive patients with 92 closed displaced intra-articular calcaneal fractures underwent ORIF with 3.5 mm screws constructed via a minimally invasive sinus tarsi approach by a single foot and ankle surgeon. RESULTS: The preoperative radiographic assessment found 36 joint depression type and 56 tongue type fractures according to the Essex-Lopresti classification. Preoperative CT assessment found 82 type II and 10 type III according to the Sander classification. Analysis of pre- and postoperative CT parameters showed that the height of the posterior facet, the length of the posterior facet, Gissane, and Bohler's angle were significantly improved. In addition, the means of posterior facet step-off in postoperative CT was 1.07, and 72% of posterior facet reductions were < 2 mm step-offs. CONCLUSION: With postoperative CT scan assessment, the treatment of displaced intra-articular calcaneal fracture with 3.5 mm screws via sinus tarsi approach has achieved good quality of reduction. Therefore, the screws-only technique is an option for treating calcaneal fracture with less soft tissue damage and implant cost.

Peripheral Visual Information Halves Attentional Choice Biases.

A growing body of research has shown that simple choices involve the construction and comparison of values at the time of decision. These processes are modulated by attention in a way that leaves decision makers susceptible to attentional biases. Here, we studied the role of peripheral visual information on the choice process and on attentional choice biases. We used an eye-tracking experiment in which participants (N = 50 adults) made binary choices between food items that were displayed in marked screen "shelves" in two conditions: (a) where both items were displayed, and (b) where items were displayed only when participants fixated within their shelves. We found that removing the nonfixated option approximately doubled the size of the attentional biases. The results show that peripheral visual information is crucial in facilitating good decisions and suggest that individuals might be influenceable by settings in which only one item is shown at a time, such as e-commerce.

Enhanced cognitive interference during visuomotor tasks may cause eye-hand dyscoordination.

In complex visuomotor tasks, such as cooking, people make many saccades to continuously search for items before and during reaching movements. These tasks require cognitive resources, such as short-term memory and task-switching. Cognitive load may impact limb motor performance by increasing demands on mental processes, but mechanisms remain unclear. The Trail-Making Tests, in which participants sequentially search for and make reaching movements to 25 targets, consist of a simple numeric variant (Trails-A) and a cognitively challenging variant that requires alphanumeric switching (Trails-B). We have previously shown that stroke survivors and age-matched controls make many more saccades in Trails-B, and those increases in saccades are associated with decreases in speed and smoothness of reaching movements. However, it remains unclear how patients with neurological injuries, e.g., stroke, manage progressive increases in cognitive load during visuomotor tasks, such as the Trail-Making Tests. As Trails-B trial progresses, switching between numbers and letters leads to progressive increases in cognitive load. Here, we show that stroke survivors with damage to frontoparietal areas and age-matched controls made more saccades and had longer fixations as they progressed through the 25 alphanumeric targets in Trails-B. Furthermore, when stroke survivors made saccades during reaching movements in Trails-B, their movement speed slowed down significantly. Thus, damage to frontoparietal areas serving cognitive motor functions may cause interference between oculomotor, visual, and limb motor functions, which could lead to significant disruptions in activities of daily living. These findings augment our understanding of the mechanisms that underpin cognitive-motor interference during complex visuomotor tasks.

The Effects of Language Barriers and Time Constraints on Online Learning Performance: An Eye-Tracking Study.

OBJECTIVE: The goal of this study is to model the effect of language use and time pressure on English as a first language (EFL) and English as a second language (ESL) students by measuring their eye movements in an on-screen, self-directed learning environment. BACKGROUND: Online learning is becoming integrated into learners' daily lives due to the flexibility in scheduling and location that it offers. However, in many cases, the online learners often have no interaction with one another or their instructors, making it difficult to determine how the learners are reading the materials and whether they are learning effectively. Furthermore, online learning may pose challenges to those who face language barriers or are under time pressure. METHOD: The effects of two factors, language use (EFL vs. ESL) and time constraints (high vs. low time pressure), were investigated during the presentation of online materials. The effects were analyzed based on eye movement measures (eye fixation rate-the total number of eye fixations divided by the task duration and gaze entropy) and behavioral measures (correct rate and task completion time). RESULTS: The results show that the ESL students had higher eye fixation rates and longer task completion times than the EFL students. Moreover, high time pressure resulted in high fixation rates, short task completion time, low correct rates, and high gaze entropy. CONCLUSION AND APPLICATION: The results suggest the possibility of using unobtrusive eye movement measures to develop ways to better assist those who struggle with learning in the online environment.

"Look at the future": Maintained fixation impoverishes future thinking.

We evaluated the relationship between eye movements and future thinking. More specifically, we evaluated whether maintained fixation could influence cognitive characteristics of future thinking. We invited participants to imagine future events in two conditions: while freely exploring a white wall and while fixating a cross on the wall. Results demonstrated fewer and longer fixations, as well as fewer and shorter saccades during maintained fixation condition than in the free gaze condition. Shorter total amplitude of saccades was also observed during the maintained fixation condition than during the free-gaze condition. Regarding the cognitive characteristics of future thinking, fewer spatiotemporal details and less visual imagery, slower retrieval time, and shorter descriptions were observed for future thinking during maintained fixation than during free-gaze condition. These results demonstrate that maintaining fixation results in an effortful construction of future scenarios. We suggest that maintained fixation limits the cognitive resources that are required for future thinking.

Effects of osteoporosis on the biomechanics of various supplemental fixations co-applied with oblique lumbar interbody fusion (OLIF): a finite element analysis.

BACKGROUND: Oblique lumbar interbody fusion (OLIF) is an important surgical modality for the treatment of degenerative lumbar spine disease. Various supplemental fixations can be co-applied with OLIF, increasing OLIF stability and reducing complications. However, it is unclear whether osteoporosis affects the success of supplemental fixations; therefore, this study analyzed the effects of osteoporosis on various supplemental fixations co-applied with OLIF. METHODS: We developed and validated an L3-S1 finite element (FE) model; we assigned different material properties to each component and established models of the osteoporotic and normal bone lumbar spine. We explored the outcomes of OLIF combined with each of five supplemental fixations: standalone OLIF; OLIF with lateral plate fixation (OLIF + LPF); OLIF with translaminar facet joint fixation and unilateral pedicle screw fixation (OLIF + TFJF + UPSF); OLIF with unilateral pedicle screw fixation (OLIF + UPSF); and OLIF with bilateral pedicle screw fixation (OLIF + BPSF). Under the various working conditions, we calculated the ranges of motion (ROMs) of the normal bone and osteoporosis models, the maximum Mises stresses of the fixation instruments (MMSFIs), and the average Mises stresses on cancellous bone (AMSCBs). RESULTS: Compared with the normal bone OLIF model, no demonstrable change in any segmental ROM was apparent. The MMSFIs increased in all five osteoporotic OLIF models. In the OLIF + TFJF + UPSF model, the MMSFIs increased sharply in forward flexion and extension. The stress changes of the OLIF + UPSF, OLIF + BPSF, and OLIF + TFJF + UPSF models were similar; all stresses trended upward. The AMSCBs decreased in all five osteoporotic OLIF models during flexion, extension, lateral bending, and axial rotation. The average stress change of cancellous bone was most obvious under extension. The AMSCBs of the five OLIF models decreased by 14%, 23.44%, 21.97%, 40.56%, and 22.44% respectively. CONCLUSIONS: For some supplemental fixations, the AMSCBs were all reduced and the MMSFIs were all increased in the osteoporotic model, compared with the OLIF model of normal bone. Therefore, the biomechanical performance of an osteoporotic model may be inferior to the biomechanical performance of a normal model for the same fixation method; in some instances, it may increase the risks of fracture and internal fixation failure.

Oblique lateral interbody fusion combined with different internal fixations for the treatment of degenerative lumbar spine disease: a finite element analysis.

BACKGROUND: Little is known about the biomechanical performance of different internal fixations in oblique lumbar interbody fusion (OLIF). Here, finite element (FE) analysis was used to describe the biomechanics of various internal fixations and compare and explore the stability of each fixation. METHODS: CT scans of a patient with lumbar degenerative disease were performed, and the l3-S1 model was constructed using relevant software. The other five FE models were constructed by simulating the model operation and adding different related implants, including (1) an intact model, (2) a stand-alone (SA) model with no instrument, (3) a unilateral pedicle screw model (UPS), (4) a unilateral pedicle screw contralateral translaminar facet screw model (UPS-CTFS), (5) a bilateral pedicle screw (BPS) model, and (6) a cortical bone trajectory screw model (CBT). Various motion loads were set by FE software to simulate lumbar vertebral activity. The software was also used to extract the range of motion (ROM) of the surgical segment, CAGE and fixation stress in the different models. RESULTS: The SA group had the greatest ROM and CAGE stress. The ROM of the BPS and UPS-CTFS was not significantly different among motion loadings. Compared with the other three models, the BPS model had lower internal fixation stress among loading conditions, and the CBT screw internal fixation had the highest stress among loads. CONCLUSIONS: The BPS model provided the best biomechanical stability for OLIF. The SA model was relatively less stable. The UPS-CTFS group had reduced ROM in the fusion segments, but the stresses on the internal fixation and CAGE were relatively higher in the than in the BPS group; the CBT group had a lower flexion and extension ROM and higher rotation and lateral flexion ROM than the BPS group. The stability of the CBT group was poorer than that of the BPS and LPS-CTFS groups. The CAGE and internal fixation stress was greater in the CBT group.

Review and Evaluation of Eye Movement Event Detection Algorithms.

Eye tracking is a technology aimed at understanding the direction of the human gaze. Event detection is a process of detecting and classifying eye movements that are divided into several types. Nowadays, event detection is almost exclusively done by applying a detection algorithm to the raw recorded eye-tracking data. However, due to the lack of a standard procedure for how to perform evaluations, evaluating and comparing various detection algorithms in eye-tracking signals is very challenging. In this paper, we used data from a high-speed eye-tracker SMI HiSpeed 1250 system and compared event detection performance. The evaluation focused on fixations, saccades and post-saccadic oscillation classification. It used sample-by-sample comparisons to compare the algorithms and inter-agreement between algorithms and human coders. The impact of varying threshold values on threshold-based algorithms was examined and the optimum threshold values were determined. This evaluation differed from previous evaluations by using the same dataset to evaluate the event detection algorithms and human coders. We evaluated and compared the different algorithms from threshold-based, machine learning-based and deep learning event detection algorithms. The evaluation results show that all methods perform well for fixation and saccade detection; however, there are substantial differences in classification results. Generally, CNN (Convolutional Neural Network) and RF (Random Forest) algorithms outperform threshold-based methods.

Biomechanical comparison of four different posterior malleolus fixation techniques: A finite element analysis.

PURPOSE: The objective of this study was to compare the biomechanical behavior of four fixation methods for posterior malleolar fracture (PMF) by finite element analysis (FEM). METHODS: Four internal fixation techniques used for fixation of PMF were assessed by FEM - a computational study: posterior one-third tubular 3.5 mm buttress plate (PP) with one screw (PP 1 screw), PP with two screws (PP 2 screws), two cannulated 3.5 mm lag screws in the antero-posterior (AP) direction (AP lag screws), and two postero-anterior (PA) cannulated 3.5 mm lag screws (PA lag screws). PMF with 30% and 50% fragment sizes were simulated through computational processing reconstructed from computed tomography (CT). The simulated loads of 700 N and 1500 N were applied to the proximal tibial end. The FEM evaluated the total and localized displacements of the PMF. For the analysis of stresses, the variables maximum principal (traction) and minimum principal (compression) were used. For the metallic implants, the equivalent von Mises stress (VMS) was used. RESULTS: PA lag screw showed the lowest values for total and localized displacement, minimum and maximum total stress, and VMS in both physiological conditions and sizes of posterior malleolus involvement. The localized displacement was statistically lower for lag screws compared to PP techniques at 700 N (p < 0.05) and 1200 N (p < 0.05). The maximum total stress was statistically lower for PA lag screws compared to PP 1 fixation with 700 N (p = 0.03) and 1200 N (p = 0.039). CONCLUSION: PA lag screws yield better results in terms of total and localized displacement, minimum and maximum total stress, and VMS in both physiological conditions and sizes of posterior malleolus involvement. These results demonstrate that PA lag screws are biomechanically the most efficient technique for the fixation of PMF.

Looking at remembering: Eye movements, pupil size, and autobiographical memory.

To examine the relationship between visual imagery and autobiographical memory, eye position and pupil size were recorded while participants first searched for memories and then reconstructed the retrieved memories (Experiment 1), or only searched for memories (Experiment 2). In Experiment 1, we observed that, although recollective experience was not associated with the number of fixations per minute, memories that took longer to retrieve were linked to increased pupil size. In Experiment 2, we observed that directly retrieved memories were recalled more quickly and were accompanied by smaller pupils than generatively retrieved memories. After correcting for response time, retrieval mode also produced an effect, showing that decreased pupil size is not simply due to directly retrieved memories being recalled more quickly. These findings provide compelling evidence that objective measures, such as pupil size, can be used alongside subjective measures, such as self-reports, to distinguish between directly retrieved and generatively retrieved memories.

A biomechanical analysis of anterior cervical discectomy and fusion alone or combined cervical fixations in treating compression-extension injury with unilateral facet joint fracture: a finite element study.

BACKGROUND: Compression-extension injury with unilateral facet joint fracture is one of the most devastating injuries of subaxial cervical spine. However, it is not yet clear which fixation technique represents the optimal choice in surgical management. This study aims to assess the construct stability at the operative level (C4/C5 cervical spine) following anterior cervical discectomy and fusion (ACDF) alone and combined fixation techniques (posterior-anterior fixations). METHODS: A previously validated three-dimensional C2-T1 finite element model were modified to simulate surgical procedures via the anterior-only approach (ACDF) and combined cervical approach [(transarticular screw, lateral mass screw, unilateral pedicle screw, bilateral pedicle screw) + ACDF, respectively] for treating compression-extension injury with unilateral facet joint fracture at C4/C5 level. Construct stability (range of rotation, axial compression displacement and anterior shear displacement) at the operative level was comparatively analyzed. RESULTS: In comparison with combined fixation techniques, a wider range of motion and a higher maximum von Mises stress was found in single ACDF. There was no obvious difference in range of motion among transarticular screw and other posterior fixations in the presence of anterior fixation. In addition, the screws inserted by transarticular screw technique had high stress concentration at the middle part of the screw but much less than 500 MPa under different conditions. Furthermore, the variability of von Mises stress in the transarticular screw fixation device was significantly lower than ACDF but no obvious difference compared with other posterior fixations. CONCLUSIONS: Of the five fixation techniques, ACDF has proven poor stability and high structural stress. Compared with lateral and pedicle screw, transarticular screw technique was not worse biomechanically and less technically demanding to acquire in clinical practice. Therefore, our study suggested that combined fixation technique (transarticular screw + ACDF) would be a reasonable treatment option to acquire an immediate stabilization in the management of compression-extension injury with unilateral facet joint fracture. However, clinical aspects must also be regarded when choosing a reconstruction method for a specific patient.

Digital Integration and Automated Assessment of Eye-Tracking and Emotional Response Data Using the BioSensory App to Maximize Packaging Label Analysis.

New and emerging non-invasive digital tools, such as eye-tracking, facial expression and physiological biometrics, have been implemented to extract more objective sensory responses by panelists from packaging and, specifically, labels. However, integrating these technologies from different company providers and software for data acquisition and analysis makes their practical application difficult for research and the industry. This study proposed a prototype integration between eye tracking and emotional biometrics using the BioSensory computer application for three sample labels: Stevia, Potato chips, and Spaghetti. Multivariate data analyses are presented, showing the integrative analysis approach of the proposed prototype system. Further studies can be conducted with this system and integrating other biometrics available, such as physiological response with heart rate, blood, pressure, and temperature changes analyzed while focusing on different label components or packaging features. By maximizing data extraction from various components of packaging and labels, smart predictive systems can also be implemented, such as machine learning to assess liking and other parameters of interest from the whole package and specific components.

Effects of full windshield head-up display on visual attention allocation.

This study explores the impact of full windshield head-up display (FHUD) cues on the visual attention allocation of drivers under different scenarios. Forty-eight participants with driving experience were randomly divided into two groups and asked to drive on a preset route in various virtual driving scenarios created in advance. The full windshield highlights situational cues related to the driving task, such as lane lines, safe vehicle distance warnings, navigation guidance and pedestrian cues. Regarding the perception of situational cues, the number of fixations and mean fixation duration with FHUD were lower than those without FHUD. Furthermore, the dwell time percentage of the driver's forward view with FHUD was larger than that without FHUD, and the dwell time percentage on both sides was smaller than that without FHUD. In conclusion, FHUD may help drivers more effectively perceive cues and improve drivers' visual attention allocation. Practitioner summary: FHUD may affect drivers' attention while driving. We examined the effect of FHUD on number of fixations, fixation duration and dwell time percentage in the area of interest under different weather scenarios. Experimental results indicated that FHUD could improve drivers' visual attention allocation and help drivers more effectively perceive cues. Abbreviations: FHUD: full windshield head-up display; HUD: head-up display; HDD: head-down display; AOI: area of interests; AR: augmented reality.

Undersweep fixations during reading in adults and children.

Return sweeps take a reader's fixation from the end of one line to the start of the next. Return sweeps frequently undershoot their target and are followed by a corrective saccade toward the left margin. The pauses prior to corrective saccades are typically considered to be uninvolved in linguistic processing. However, recent findings indicate that these undersweep fixations influence skilled adult readers' subsequent reading pass across the line and provide preview of line-initial words. The current research examined these effects in children. First, a children's reading corpus analysis revealed that words receiving an undersweep fixation were more likely skipped and received shorter gaze durations during a subsequent pass. Second, a novel eye movement experiment that directly compared adults' and children's eye movements indicated that, during an undersweep fixation, readers very briefly allocate their attention to the fixated word-as indicated by inhibition of return effects during a subsequent pass-prior to deploying attention toward the line-initial word. We argue that prior to the redeployment of attention, readers extract information at the point of fixation that facilitates later encoding and saccade targeting. Given similar patterns of results for adults and children, we conclude that the mechanisms controlling for oculomotor coordination and attention necessary for reading across line boundaries are established from a very early point in reading development.

The relevance of the first two eye fixations for recognition memory processes.

Stimuli can be recognised based on information from only one or two eye fixations. With only one fixation, item recognition is typically above chance level and performance generally saturates by the second fixation. Thus, the first two eye fixations play an important role for recognition memory performance. However, little is known about the involved processes. Therefore, two experiments were conducted to investigate hypotheses regarding the role of the first two eye fixations for specific recognition memory processes, that is, familiarity and recollection. In addition, we looked in detail at the unique contributions of (a) longer input duration and (b) additional information provided by a second fixation for familiarity- and recollection-based recognition, using a gaze-contingent stimulus presentation technique. The experiments showed that recollection- but not familiarity-based recognition increased with two compared to only one fixation, and that the second fixation boosted recollection both due to longer availability of the input and additional stimulus information gathered.

Microsaccades and interest areas during free-viewing sport task.

Microsaccades are important fixation eye movements for visual scene perception. Compared to novices, athletes make fewer fixations of longer duration toward limited interest areas crucial for action prediction. Thus, our aim was to study the microsaccade features during those fixations. Gaze behaviour of expert and novice table tennis players was recorder during a task in which subjects were instructed to predict the direction of the ball after the opponent's throw. Three interest areas from the opponent's body and one from the ball trajectory were identified. We analysed correctness of predictions, fixations, microsaccades and saccades to estimate the relationship between eye movements toward interest areas and success in the task. Compared to novices, experts fixated more on hand-racket during forehand and on trunk during backhand drive technique. Longer fixations on hand-racket and trunk were associated with higher microsaccade rate with a narrower directional distribution of them. It probably means that athletes focused their gaze on these small areas, suggesting enhanced attention mainly to them, and fewer consideration for the surrounding regions. We can assume that microsaccade rate and average direction could be related to the salience of interest areas during performance.