Skeletal fluorosis: an uncommon cause, yet a rescue treatment?

PURPOSE: Skeletal fluorosis (SF) results from chronic exposure to fluoride (F-) causing excessive aberrantly mineralized brittle bone tissue, fractures, and exostoses. There is no established treatment other than avoiding the source of F-. Still, excess F- can persist in bone for decades after exposure ceases. CASE PRESENTATION: A 50-year-old woman presented with multiple, recurrent, low AQ2 trauma fractures yet high radiologic bone mineral density. Serum F- was elevated, and osteomalacia was documented by non-decalcified transiliac biopsy. She reported intermittently "huffing" a keyboard cleaner containing F- (difluoroethane) for years. Following cessation of her F- exposure, we evaluated the administration of the parathyroid hormone analog, abaloparatide, hoping to increase bone remodeling and diminish her skeletal F- burden. CONCLUSION: Due to the prolonged half-life of F- in bone, SF can cause fracturing long after F- exposure stops. Anabolic therapy approved for osteoporosis, such as abaloparatide, may induce mineralized bone turnover to replace the poorly mineralized osteomalacic bone characteristic of SF and thereby diminish fracture risk. Following abaloparatide treatment for our patient, there was a decrease in bone density as well as a reduction in F- levels.

Characterization of a mixed mode fluorocarbon/weak anion exchange sorbent for the separation of perfluoroalkyl substances.

The ubiquitous presence and persistence of per- and polyfluoroalkyl substances (PFAS) in the environment have raised concerns in the scientific community. Current research efforts are prioritizing effective PFAS remediation through novel sorbents with orthogonal interaction mechanisms. Recognized sorption mechanisms between PFAS and sorbents include hydrophobic, electrostatic, and fluorine-fluorine interaction. The interplay of these mechanisms contributes significantly to improved sorption capacity and selectivity in PFAS separations. In this study, a primary/secondary amine-functionalized polystyrene-divinylbenzene (Sepra-WAX) polymer was modified to create a fluorinated WAX resin (Sepra-WAX-KelF-PEI). The synthesis intermediate (Sepra-WAX-KelF) was also tested to assess the improvement of the final product (Sepra-WAX-KelF-PEI). The adsorption capacity of Sepra-WAX, Sepra-WAX-KelF, and Sepra-WAX-KelF-PEI, and their interactions with PFAS were evaluated. The effect of pH, ionic strength, and organic solvents on PFAS sorption in aqueous solution was also investigated. The sorbents showed varied adsorption capacities for perfluorooctanoic acid, perfluoropentanoic acid, perfluoro-n-decanoic acid, and hexafluoropropylene oxide dimer acid, with the average extraction capacity of the four analytes being Sepra-WAX-KelF-PEI (523 mg/g) > Sepra-WAX (353 mg/g) > Sepra-WAX-KelF (220 mg/g). Sepra-WAX-KelF-PEI provided the highest adsorption capacity for all analytes tested, proving that the combination of electrostatic and hydrophobic/fluorophilic interactions is crucial for the effective preconcentration of PFAS and its future applications for PFAS remediation from aqueous solutions.

Highly flexible and transparent colorless polyimide substrate sandwiched between plasma polymerized fluorocarbon and InGaTiO for high performance flexible perovskite solar cells.

We integrated transparent antireflective coatings and transparent electrodes onto flexible colorless polyimide (CPI) substrates to fabricate high-performance flexible perovskite solar cells. Multifunctional PPFC/CPI/IGTO substrates were fabricated by sputtering the optimal plasma-polymerized fluorocarbon (PPFC) antireflective coating and InGaTiO (IGTO) electrode films on both sides of the CPI substrate. By applying PPFC with a low refractive index (1.38) as an antireflective coating, the transparency of the PPFC/CPI/IGTO substrate increased by an additional 1.2%. In addition, owing to the amorphous characteristics of the PPFC and IGTO layers, the PPFC/CPI/IGTO substrate showed constant sheet resistance and transmittance change even after 10,000 cycles during the bending tests. The flexible perovskite solar cells, fabricated on the PPFC/CPI/IGTO substrate, exhibited an increase in current density of 1.48 mA/cm2 after the deposition of the PPFC antireflective coating. These results confirmed that the PPFC/CPI/IGTO substrate was durable against high-temperature treatment, flexible, and exhibited excellent electrical characteristics. This enhanced the efficiency and durability of the flexible perovskite solar cells. Moreover, the hydrophobic PPFC layer allowed the self-cleaning of inflexible perovskite solar cells. Given these attributes, the PPFC/CPI/IGTO structure has been recognized as a good choice for multifunctional substrates of flexible perovskite solar cells, presenting the potential for enhancing performance.

We have confirmed the durability of PPFC/CPI/IGTO substrates against high-temperature treatment, their flexibility, transparency, and their exceptional electrical properties, suggesting them as a prime selection for FPSCs.

Molecular Dynamics Simulations of the Short-Chain Fluorocarbon Surfactant PFHXA and the Anionic Surfactant SDS at the Air/Water Interface.

The research and development of alternatives to long-chain fluorocarbon surfactants are desperately needed because they are extremely toxic, difficult to break down, seriously harm the environment, and limit the use of conventional aqueous film-forming foam fire extinguishing agents. In this study, mixed surfactant systems containing the short-chain fluorocarbon surfactant perfluorohexanoic acid (PFHXA) and the hydrocarbon surfactant sodium dodecyl sulfate (SDS) were investigated by molecular dynamics simulation to investigate the microscopic properties at the air/water interface at different molar ratios. Some representative parameters, such as surface tension, degree of order, density distribution, radial distribution function, number of hydrogen bonds, and solvent-accessible surface area, were calculated. Molecular dynamics simulations show that compared with a single type of surfactant, mixtures of surfactants provide superior performance in improving the interfacial properties of the gas-liquid interface. A dense monolayer film is formed by the strong synergistic impact of the two surfactants. Compared to the pure SDS system, the addition of PFHXA caused SDS to be more vertically oriented at the air/water interface with a reduced tilt angle, and a more ordered structure of the mixed surfactants was observed. Hydrogen bonding between SDS headgroups and water molecules is enhanced with the increasing PFHXA. The surface activity is arranged in the following order: PFHXA/SDS = 1:1 > PFHXA/SDS = 3:1 > PFHXA/SDS = 1:3. These results indicate that a degree of synergistic relationship exists between PFHXA and SDS at the air/water interface.

Modification and Application Performance Study of Ultra-Fine Dry Powder Extinguishing Agent.

Ultra-fine dry powder extinguishing agent (UDPEA) is a promising alternative to Halon agents in aviation firefighting. The formulation of UDPEAs should balance environmental friendliness and practical engineering requirements, including high extinguishing efficiency, excellent flowability, and prolonged anti-reignition. This study investigates the effects of three modification methods (single perfluorooctyl triethoxysilane (FOTS), single N-(3-Triethoxysilylpropyl)perfluoro(2,5-dimethyl-3,6-dioxanonanoyl)amide (PFPE), and a combination of FOTS and PFPE at various mass ratios (2.0:0.4, 1.6:0.8, 1.2:1.2, 0.8:1.6, 0.4:2.0) (g)) on the performance of sodium bicarbonate-based UDPEA. The results indicate that using FOTS or PFPE alone improves the water and oil contact angles, but still fails to meet the required hydrophobicity and oleophobicity standards, and it also reduces the flowability and fire-extinguishing capability. A combination of FOTS and PFPE at the 1:2 ratio yields the best performance, with the water and oil contact angles of 145.169° and 143.542°, respectively, the lowest flowability index (0.224), minimal extinguishing concentration and time (14.183 g/m3 and 1.976 s, respectively), which is only 52.7% and 68.3% of those of the unmodified UDPEA's (26.927 g/m3 and 2.893 s), and the longest anti-reignition time (68.5 s). In addition, the fire-extinguishing mechanisms (chemical inhibition and physical heat absorption) and anti-reignition mechanisms of the modified UDPEA (with the FOTS to PFPE ratio of 1:2) were revealed. This research aims to design an eco-friendly, high-performance UDPEA as an effective substitute for Halon extinguishing agents. These findings can provide valuable insights for evaluating and selecting aviation fire-extinguishing agents.

Fluorocarbon Modified Chitosan to Enable Transdermal Immunotherapy for Melanoma Treatment.

Despite the rapid development of the immune checkpoint blockade (ICB) in melanoma treatment, the immunosuppressive tumor microenvironment (TME) still hinders the efficacy of immunotherapy. Recently, using agonists to modulate the TME have presented promising clinical responses in combination with ICB therapies. However, local intratumoral injection as the commonly used administration route for immune agonists would lead to low patient compliance. Herein, it is demonstrated that fluorocarbon modified chitosan (FCS) can self-assemble with immune adjuvant polyriboinosinic:polyribocytidylic acid (poly(I:C)), forming nanoparticles that can penetrate through cutaneous barriers to enable transdermal delivery. FCS/poly(I:C) can efficiently activate various types of cells presented on the transdermal route (through the skin into the TME), leading to IRF3-mediated IFN-ß induction in the activated cells for tumor repression. Furthermore, transdermal FCS/poly(I:C) treatment can significantly magnify the efficacy of the programmed cell death protein 1 (PD-1) blockade in melanoma treatment through activating the immunosuppressive TME. This study approach offered an attractive transdermal approach in combined with ICB therapy for combined immunotherapy, particularly suitable for melanoma treatment.

Surface Activity, Wetting, and Aggregation of a Perfluoropolyether Quaternary Ammonium Salt Surfactant with a Hydroxyethyl Group.

This paper reports the synthesis of a novel quaternary surfactant containing a hydroxyethyl group (PFPE-C) and the surface properties of its aqueous solution (investigated by comparisons with two structurally similar chemicals, dodecyl-(2-hydroxyethyl)-dimethylammonium chloride (DHDAC) and PFPE-A). The minimum surface tension (γCMC) and critical micelle concentration (CMC) of the PFPE-C aqueous solution were 17.35 mN/m and 0.024 mmol/L, respectively. This study confirms that surfactants containing hydroxyethyl groups efficiently reduce the surface tension of aqueous solutions, and fluorocarbon surfactants exhibit better surface activity than ordinary hydrocarbon surfactants with similar structures. The micellization, aggregation, air-water interfacial adsorption, and wettability of PFPE-C aqueous solutions have been systematically investigated. Highly concentrated PFPE-C aqueous solutions exhibit good wettability on PTFE and paraffin films. Moreover, the aggregates of PFPE-C in the aqueous solution were clearly seen as vesicles on Cryo-TEM micrographs. Primary biodegradation results indicate that 19% of PFPC-C can be degraded within one week.

Synthesis and Performance Analysis of Green Water and Oil-Repellent Finishing Agent with Di-Short Fluorocarbon Chain.

A novel fluorine-containing water-repellent agent (OFAE-SA-BA) was designed and synthesized by emulsion copolymerization, which was used to replace the commercial long fluorocarbon chain water-repellent agent. To improve water repellency, the intermediate and monomer containing two short fluoroalkyl chains were successfully synthesized and characterized by 1H NMR, 13C NMR and FT-IR, respectively. After being treated by the water-repellent agent, the surface chemical composition, molecular weight, thermal stability, surface morphology, wetting behavior, and durability of the modified cotton fabrics were characterized using X-ray photoelectron spectrophotometry (XPS), gel permeation chromatography (GPC), thermal degradation (TG), scanning electron microscopy (SEM), and video-based contact angle goniometry, respectively. The cotton fabric demonstrated water contact angle of 154.1°, both the water and oil repellency rating were grade 4. The durability of water repellency of the treated fabrics only decreased slightly after 30 times, which represented very good washing durability. The finishing agent did not affect the whiteness of the fabric.

Synthesis and Phase Behavior of (Semifluorinated Alkane)-Based Side-Chain Liquid Crystalline Copolymers.

Side-chain liquid crystalline polymer (SCLCP) usually contains a simple and flexible homopolymer as main chain, while its effect on the self-assembly behavior is often ignored. In this work, in order to increase the structural complexity and investigate the interaction between the main chain and mesogens, perfluorinated segments are introduced into the main chain using a photoinduced Step Transfer-Addition & Radical-Termination polymerization method, producing a novel series of SCLCPs containing 4-methoxyphenyl benzoate mesogens, soft hydrocarbon spacers, and a strictly alternating perfluoroalkyl and alkyl backbone. By adjusting the length of spacers or perfluoroalkyl segments, several mesophases with complex chain packing structures are achieved. This design strategy that constructing highly ordered liquid crystalline (LC) structures from SCLCPs with precise chemical structure provides a facile way toward novel LC nanomaterials.

Thyroid homeostasis in B6C3F1 mice upon sub-chronic exposure to trifluoroiodomethane (CF3I).

Trifluoroiodomethane (CF3I) is a fire suppressant gas with potential for use in low global-warming refrigerant blends. Data from studies in rats suggest that the most sensitive health effect of CF3I is thyroid hormone perturbation, but the rat is a particularly sensitive species for disruption of thyroid homeostasis. Mice appear to be less sensitive than rats but still a conservative model with respect to humans. The purpose of this study was to test tolerance and thyroid response to CF3I in B6C3F1 male mice. Male mice were exposed to CF3I for 6 h per day, for 28 days, via whole body exposure at concentrations of 2500, 5000 and 10,000 ppm. A 16-day recovery period was included to evaluate reversibility. No adverse clinical signs were observed throughout the study, and body weights were unaffected by exposure. CF3I exposure had no effect on thyroid histology. An increase in relative thyroid weight was observed at 10,000 ppm on day 28 but not in a separate group of animals evaluated on day 29, and thyroid weight was not different from controls at 44 days. Slight and sporadic changes in serum triiodothyronine, thyroxine, and thyroid-stimulating hormone were observed but did not follow a consistent pattern with respect to timing, dose, or direction. Overall, exposure at up to 10,000 ppm (1.0%) of CF3I gas for 28 days produced no overt general toxicity and only transient, recoverable effects on thyroid weight and hormones at certain concentrations. On the basis of the effect of CF3I exposure on the thyroid, including evaluation of thyroid histopathology, the no observed adverse effect level for this study is 10,000 ppm. Considering the apparently greater toxicity reported in prior studies in male rats, our data suggest a species difference between rats and mice in terms of susceptibility to CF3I-induced thyroid hormone perturbation.

Adsorption Properties of Hydrocarbon and Fluorocarbon Surfactants Ternary Mixture at the Water-Air Interface.

Measurements were made of the surface tension of the aqueous solutions of p-(1,1,3,3-tetramethylbutyl) phenoxypoly(ethylene glycols) having 10 oxyethylene groups in the molecule (Triton X-100, TX100) and cetyltrimethylammonium bromide (CTAB) with Zonyl FSN-100 (FC6EO14, FC1) as well as with Zonyl FSO-100 (FC5EO10, FC2) ternary mixtures. The obtained results were compared to those provided by the Fainerman and Miller equation and to the values of the solution surface tension calculated, based on the contribution of a particular surfactant in the mixture to the reduction of water surface tension. The changes of the aqueous solution ternary surfactants mixture surface tension at the constant concentration of TX100 and CTAB mixture at which the water surface tension was reduced to 60 and 50 mN/m as a function of fluorocarbon surfactant concentration, were considered with regard to the composition of the mixed monolayer at the water-air interface. Next, this composition was applied for the calculation of the concentration of the particular surfactants in the monolayer using the Frumkin equation. On the other hand, the Gibbs surface excess concentration was determined only for the fluorocarbon surfactants. The tendency of the particular surfactants to adsorb at the water-air interface was discussed, based on the Gibbs standard free energy of adsorption which was determined using different methods. This energy was also deduced, based on the surfactant tail surface tension and tail-water interface tension.

Porous Covalent Organic Polymers for Efficient Fluorocarbon-Based Adsorption Cooling.

Adsorption-based cooling is an energy-efficient renewable-energy technology that can be driven using low-grade industrial waste heat and/or solar heat. Here, we report the first exploration of fluorocarbon adsorption using porous covalent organic polymers (COPs) for this cooling application. High fluorocarbon R134a equilibrium capacities and unique overall linear-shaped isotherms are revealed for the materials, namely COP-2 and COP-3. The key role of mesoporous defects on this unusual adsorption behavior was demonstrated by molecular simulations based on atomistic defect-containing models built for both porous COPs. Analysis of simulated R134a adsorption isotherms for various defect-containing atomistic models of the COPs shows a direct correlation between higher fluorocarbon adsorption capacities and increasing pore volumes induced by defects. Combined with their high porosities, excellent reversibility, fast kinetics, and large operating window, these defect-containing porous COPs are promising for adsorption-based cooling applications.

Optimized and accelerated 19 F-MRI of inhaled perfluoropropane to assess regional pulmonary ventilation.

PURPOSE: To accelerate 19 F-MR imaging of inhaled perfluoropropane using compressed sensing methods, and to optimize critical scan acquisition parameters for assessment of lung ventilation properties. METHODS: Simulations were performed to determine optimal acquisition parameters for maximal perfluoropropane signal-to-noise ratio (SNR) in human lungs for a spoiled gradient echo sequence. Optimized parameters were subsequently employed for 19 F-MRI of inhaled perfluoropropane in a cohort of 11 healthy participants using a 3.0 T scanner. The impact of 1.8×, 2.4×, and 3.0× undersampling ratios on 19 F-MRI acquisitions was evaluated, using both retrospective and prospective compressed sensing methods. RESULTS: 3D spoiled gradient echo 19 F-MR ventilation images were acquired at 1-cm isotropic resolution within a single breath hold. Mean SNR was 11.7 ± 4.1 for scans acquired within a single breath hold (duration = 18 s). Acquisition of 19 F-MRI scans at shorter scan durations (4.5 s) was also demonstrated as feasible. Application of both retrospective (n = 8) and prospective (n = 3) compressed sensing methods demonstrated that 1.8× acceleration had negligible impact on qualitative image appearance, with no statistically significant change in measured lung ventilated volume. Acceleration factors of 2.4× and 3.0× resulted in increasing differences between fully sampled and undersampled datasets. CONCLUSION: This study demonstrates methods for determining optimal acquisition parameters for 19 F-MRI of inhaled perfluoropropane and shows significant reduction in scan acquisition times (and thus participant breath hold duration) by use of compressed sensing.

Helicity of perfluoroalkyl chains controlled by the self-assembly of the Ala-Ala dipeptides.

Four Ala-Ala dipeptides with a perfluoroalkyl chain at the N-terminal were synthesized. They were able to self-assemble into helical nanofibers and/or twisted nanobelts in a mixture of DMSO/H2 O. The handedness of nanofibers and nanobelts was controlled by the chirality of the alanine at the N-terminal. The stacking handedness of the phenylene groups and the helicity of the perfluoroalkyl chain were studied using circular dichroism spectroscopy and vibrational circular dichroism, respectively. The chirality of the alanine at N-terminal controlled the stacking handedness of the neighboring phenylene groups. Moreover, due to the low potential barrier between M- and P-helices of the perfluorocarbon chain, the handedness of the organic self-assemblies eventually controlled the helicity of the perfluorocarbon chain. X-ray diffraction indicated that a lamellar structure was formed by the dimers of the dipeptides.

Multifunctional fluorocarbon photobioreactor system: a novel integrated device for CO2 segregation, O2 collection, and enhancement of microalgae growth and bioproductions.

An enhanced greenhouse effect due to high CO2 emissions has become one of the most concerning issues worldwide. Although plant/algae-mediated approaches have been extensively used for CO2 segregation in the last decades, these methods are generally aimed at environment protection. In contrast, less attention has been given to CO2 manipulation that has regrettably caused a decrease in the commercial availability of the associated technologies. To generate a system for practical use, a synthetic fluorocarbon photobioreactor system (FCPBRS) consisting of a CO2 isolation unit, a gas modulation unit, an O2 collection unit, and a microalgal culture chamber was developed in this study. After injecting a 60%-N2/40%-CO2 gas mixture into the CO2 isolation unit for 10 days, the results showed that the FCPBRS enabled a > 93% CO2 separation efficiency using a fluorocarbon liquid FC-40 as the CO2 adsorbent. In addition, the growth rate of Nannochloropsis oculata was significantly enhanced when cultured with 20 mL min-1 of the FC-40 flow containing 2% CO2 throughout the time course, resulting in 4.7-, 4.6-, and 4.5-fold (P < 0.05 for each) increases in biomass, total lipid, and eicosapentaenoic acid yields, respectively, compared to the aerated group without FC-40. Moreover, approximately 1600 mL of photosynthetic O2 with a ~ 80% collection efficiency was obtained in the O2 collection unit within 10 days of FCPBRS operation. These outcomes indicate that the FCPBRS may provide a feasible means to simultaneously achieve CO2 isolation, O2 collection, and enhanced microalgae bioproductions.

Interfacial Behavior of Oligo(Ethylene Glycol) Dendrons Spread Alone and in Combination with a Phospholipid as Langmuir Monolayers at the Air/Water Interface.

Dendrons consisting of two phosphonate functions and three oligo(ethylene glycol) (OEG) chains grafted on a central phenoxyethylcarbamoylphenoxy group were synthesized and investigated as Langmuir monolayers at the surface of water. The OEG chain in the para position was grafted with a t-Bu end-group, a hydrocarbon chain, or a partially fluorinated chain. These dendrons are models of structurally related OEG dendrons that were found to significantly improve the stability of aqueous dispersions of iron oxide nanoparticles when grafted on their surface. Compression isotherms showed that all OEG dendrons formed liquid-expanded Langmuir monolayers at large molecular areas. Further compression led to a transition ascribed to the solubilization of the OEG chains in the aqueous phase. Brewster angle microscopy (BAM) provided evidence that the dendrons fitted with hydrocarbon chains formed liquid-expanded monolayers throughout compression, whilst those fitted with fluorinated end-groups formed crystalline-like domains, even at large molecular areas. Dimyristoylphosphatidylcholine and dendron molecules were partially miscible in monolayers. The deviations to ideality were larger for the dendrons fitted with a fluorocarbon end-group chain than for those fitted with a hydrocarbon chain. Brewster angle microscopy and atomic force microscopy supported the view that the dendrons were ejected from the phospholipid monolayer during the OEG conformational transition and formed crystalline domains on the surface of the monolayer.

Single-Step Fluorocarbon Plasma Treatment-Induced Wrinkle Structure for High-Performance Triboelectric Nanogenerator.

A triboelectric nanogenerator (TENG) has been thought to be a promising method to harvest energy from environment. To date, the utilization of surface structure and material modification has been considered the most effective way to increase its performance. In this work, a wrinkle structure based high-performance TENG is presented. Using the fluorocarbon plasma treatment method, material modification and surface structure are introduced in one step. The output ability of TENG is dramatically enhanced. After the optimization of plasma treatment, the maximum current and surface charge density are 182 µA about 165 µC m(-2). Compared with untreated TENG, the wrinkle structure makes the current and surface charge density increase by 810% and 528%, separately. X-ray photoelectron spectroscopy is employed to analyze the chemical modification mechanism of this fluorocarbon plasma treatment. Facilitated by its high output performance, this device could directly light 76 blue light emitting diodes under finger typing. The output electric energy could be stored then utilized to power a commercial calculator. As a result of the simple fabrication process and high output ability, devices fabricated using this method could bring forward practical applications using TENGs as power sources.

Can Fluorinated Molecular Cages Be Utilized as Building Blocks of Hyperhalogens?

Based on the density functional theory for exchange-correlation potential, fluorocarbon molecular cages are investigated as building blocks of hyperhalogens. By utilizing C8 F7 as a ligand, a series of hyperhalogen anions, that is, M(C8 F7 )2 (-) (M=Li, Na, and K) and M(C8 F7 )3 (-) (M=Be, Mg, and Ca), are modeled. Calculations show that all the C8 F7 moieties preserve their geometric and electronic integrity in these anions. These anionic molecules possess larger vertical electron detachment energies (5.11-6.45 eV) than that of C8 F7 (-) , verifying their hyperhalogen nature. Moreover, it is also revealed that using larger fluorinated cage C10 F9 as ligands can bring about hyperhalogen anions with larger vertical electron detachment energies. The stability of these studied anions is determined by their large HOMO-LUMO gaps and positive dissociation energies of predetermined possible fragmentation pathways. It is hoped this study will provide an approach for the construction of new types of hyperhalogens and stimulate more research in superatom chemistry.

Absorption and recovery of n-hexane in aqueous solutions of fluorocarbon surfactants.

n-Hexane is widely used in industrial production as an organic solvent. As an industrial exhaust gas, the contribution of n-hexane to air pollution and damage to human health are attracting increasing attention. In the present study, aqueous solutions of two fluorocarbon surfactants (FSN100 and FSO100) were investigated for their properties of solubilization and dynamic absorption of n-hexane, as well as their capacity for regeneration and n-hexane recovery by thermal distillation. The results show that the two fluorocarbon surfactants enhance dissolution and absorption of n-hexane, and their effectiveness is closely related to their concentrations in solution. For low concentration solutions (0.01%-0.30%), the partition coefficient decreases dramatically and the saturation capacity increases significantly with increasing concentration, but the changes for both are more modest when the concentration is over 0.30%. The FSO100 solution presents a smaller partition coefficient and a greater saturation capacity than the FSN100 solution at the same concentration, indicating a stronger solubilization for n-hexane. Thermal distillation is a feasible method to recover n-hexane from these absorption solutions, and to regenerate them. With 90sec heating at 80-85°C, the recovery of n-hexane ranges between 81% and 85%, and the regenerated absorption solution maintains its original performance during reuse. This study provides basic information on two fluorocarbon surfactants for application in the treatment of industrial n-hexane waste gases.

Nanoparticle oxygen delivery to the ischemic heart.

OBJECTIVE: Currently there are no medications that can be administered to help deliver more oxygen to the myocardial region experiencing abnormal perfusion. The purpose of this study was to look at the nanoparticle dodecafluoropentane in an emulsion as an oxygen carrier. Using nanoparticles as an oxygen carrier is advantageous because they are able to carry oxygen past blockages that are obstructing red blood cells (6-8 µm) due to their smaller size (250 nm). With the reintroduction of oxygen to the ischemic muscle tissue, a reduced infarct size should be seen. METHODS: Male C57BL/6J mice underwent left anterior descending artery (LAD) ligation using 8-0 monofilament nylon suture. Immediately after ligation of the LAD, the control group received a 200-µl intravenous injection of phosphate buffered saline (PBS). The treated group received a dose of 0.6 ml/kg of dodecafluoropentane diluted to a total volume of 200 µl in PBS. The mice were then allowed to recover from anesthesia and were sacrificed 24 hours after the time of ligation. After the mice were sacrificed, the heart was excised and placed at -20°C for 20 minutes. The heart was then sliced into 1-mm sections and stained with tetrazolium red to identify the infarcted area. The area of infarct and ventricle were then analyzed using ImageJ software. RESULTS: The average area of infarct in comparison to the ventricle for the control mice was 29.3±0.04% compared to 11.7±0.02% for the dodecafluoropentane-treated mice. CONCLUSION: The use of dodecafluoropentane in this murine model of myocardial infarction showed a 60% reduction in infarct size (p<0.01). The possibility of using nanoparticles to deliver oxygen to hypoxic tissues has interesting implications and justifies further study.