Defect Emission and Its Dipole Orientation in Layered Ternary Znln2 S4 Semiconductor.

Defect engineering is promising to tailor the physical properties of 2D semiconductors for function-oriented electronics and optoelectronics. Compared with the extensively studied 2D binary materials, the origin of defects and their influence on physical properties of 2D ternary semiconductors are not clarified. Here, the effect of defects on the electronic structure and optical properties of few-layer hexagonal Znln2 S4 is thoroughly studied via versatile spectroscopic tools in combination with theoretical calculations. It is demonstrated that the Zn-In antistructural defects induce the formation of a series of donor and acceptor energy levels and sulfur vacancies induce donor energy levels, leading to rich recombination paths for defect emission and extrinsic absorption. Impressively, the emission of donor-acceptor pair in Znln2 S4 can be significantly tailored by electrostatic gating due to efficient tunability of Fermi level (Ef ). Furthermore, the layer-dependent dipole orientation of defect emission in Znln2 S4 is directly revealed by back focal plane imagining, where it presents obviously in-plane dipole orientation within a dozen-layer thickness of Znln2 S4 . These unique features of defects in Znln2 S4 including extrinsic absorption, rich recombination paths, gate tunability, and in-plane dipole orientation are definitely a benefit to the advanced orientation-functional optoelectronic applications.

Low-Divergence hBN Single-Photon Source with a 3D-Printed Low-Fluorescence Elliptical Polymer Microlens.

Efficiently collecting light from single-photon emitters is crucial for photonic quantum technologies. Here, we develop and use an ultralow fluorescence photopolymer to three-dimensionally print micrometer-sized elliptical lenses on individual precharacterized single-photon emitters in hexagonal boron nitride (hBN) nanocrystals, operating in the visible regime. The elliptical lens design beams the light highly efficiently into the far field, rendering bulky objective lenses obsolete. Using back focal plane imaging, we confirm that the emission is collimated to a narrow low-divergence beam with a half width at half-maximum of 2.2°. Using photon correlation measurements, we demonstrate that the single-photon character remains undisturbed by the polymer lens. The strongly directed emission and increased collection efficiency is highly beneficial for quantum optical experiments. Furthermore, our approach paves the way for a highly parallel fiber-based detection of single photons from hBN nanocrystals.

Manipulating the Transition Dipole Moment of CsPbBr3 Perovskite Nanocrystals for Superior Optical Properties.

Colloidal cesium lead halide perovskite nanocrystals exhibit unique photophysical properties including high quantum yields, tunable emission colors, and narrow photoluminescence spectra that have marked them as promising light emitters for applications in diverse photonic devices. Randomly oriented transition dipole moments have limited the light outcoupling efficiency of all isotropic light sources, including perovskites. In this report we design and synthesize deep blue emitting, quantum confined, perovskite nanoplates and analyze their optical properties by combining angular emission measurements with back focal plane imaging and correlating the results with physical characterization. By reducing the dimensions of the nanocrystals and depositing them face down onto a substrate by spin coating, we orient the average transition dipole moment of films into the plane of the substrate and improve the emission properties for light emitting applications. We then exploit the sensitivity of the perovskite electronic transitions to the dielectric environment at the interface between the crystal and their surroundings to reduce the angle between the average transition dipole moment and the surface to only 14° and maximize potential light emission efficiency. This tunability of the electronic transition that governs light emission in perovskites is unique and, coupled with their excellent photophysical properties, introduces a valuable method to extend the efficiencies and applications of perovskite based photonic devices beyond those based on current materials.

CdSe Nanoplatelet Films with Controlled Orientation of their Transition Dipole Moment.

Using liquid-liquid interfacial assembly, we control the deposition of CdSe nanoplatelets into face-down or edge-up configurations. Controlled assembly, combined with back focal plane imaging, enabled unambiguous determination of the transition dipole orientation. The transition dipole moment of the emissive band-edge exciton in CdSe nanoplatelets was found to be isotropically oriented within the plane of the nanoplatelet with no measurable out-of-plane component and no preference for the long- or short-axis of the nanoplatelet. Importantly, CdSe nanoplatelet films in the face-down configuration exhibited unity dipole orientation within the plane of the film, which could improve the external efficiency of nanoplatelet LEDs, lasers, photodetectors, and photovoltaic cells beyond that which is possible with isotropic emitters. We also show that the two self-assembled configurations have different Förster energy transfer rates, as a result of different dipole orientation and internanoplatelet distance.

Radiative decay engineering 8: Coupled emission microscopy for lens-free high-throughput fluorescence detection.

Fluorescence spectroscopy and imaging are now used throughout the biosciences. Fluorescence microscopes, spectrofluorometers, microwell plate readers and microarray imagers all use multiple optical components to collect, redirect and focus the emission onto single point or array imaging detectors. For almost all biological samples, except those with regular nanoscale features, emission occurs in all directions. With the exception of complex microscope objectives with large collection angles (NA ≤ 0.5), all these instruments collect only a small fraction of the total emission. Because of the increasing knowledge base on fluorophores within near-field (<200 nm) distances from plasmonic and photonic structures we can anticipate the development of compact devices in which the sample to be detected is located directly on solid state detectors such as CCDs or CMOS cameras. Near-field interactions of fluorophores with metallic or dielectric multi-layer structures (MLSs) can capture a large fraction of the total emission. Depending on the composition and dimensions of the MLSs, the spatial distribution of the sample emission results in distinct optical patterns on the detector surface. With either plain glass slides or MLSs the most commonly used front focal plane (FFP) images reveal the x-y spatial distribution of emission from the sample. Another approach, which is often used with two or three-dimensional nanostructures, is back focal plane (BFP) imaging. The BFP images reveal the angular distribution of the emission. The FFP and BFP images occur at certain distances from the sample which is determined by the details of the optical components. Obtaining these images requires multiple optical components and distances which are too large for the compact devices. For devices described in this paper, the images will be detected at a fixed distance between the sample and some arbitrary distance below the MLS which is determined by the geometry and thicknesses of the components. We refer to measurements at these locations as out-of-focal plane (OFP) imaging. Herein we describe a method to measure the optical fields at micron and multi-micron distances below the MLS, which will represent the images seen by an optically coupled array detector. The possibility of sub-surface optical images is illustrated using five different multi-layer structures. This is accomplished using an optical configuration which allows measurement at a front focal plane (FFP), back focal plane (BFP) or any OFP locations. Our OFP imaging method provides a link between the FFP images which reveals the surface distribution of fluorophores with the BFP images that reveal the angular distribution of emission. This linkage can be useful when examining structures which have nanoscale features due to fluorescence or leakage radiation from nanostructures.

Fluorescence Coupling to Internal Modes of 1D Photonic Crystals Characterized by Back Focal Plane Imaging.

The coupling of fluorescence with surface electromagnetic modes, such as surface plasmons on thin metal films or Bloch surface waves (BSW) on truncated one-dimensional photonic crystals (1DPC), are presently utilized for many fluorescence-based applications. In addition to the surface wave, 1DPCs also support other electromagnetic modes that are confined within the 1DPC structure. These internal modes (IMs) have not received much attention for fluorescence coupling due to lack of spatial overlap of their electric fields with the surface bound fluorophores. However, our recent studies have indicated that the fluorescence coupling with IMs occurs quite efficiently. This observed internal mode-coupled emission (IMCE) is (similar to BSW-coupled emission) indeed wavelength dependent, directional and S-polarized. In this paper, we have carried out back-focal plane (BFP) imaging to reveal that the IMs of 1DPCs can couple with surface bound excited dye molecules, with or without a BSW mode presence. Depending on the emission wavelength, the coupling is observed with BSW and IMs or only IMs of the 1DPC structure. The experimental results are well matching with numerical simulations. The occurrence of IMCE regardless of the availability of BSWs removes the dependence on just the surface mode for obtaining coupled emission from 1DPCs. The observation of IMCE is expected to widen the scope of 1DPCs for surface-based fluorescence sensing and assays.

Back focal plane imaging of Tamm plasmons and their coupled emission.

The unique optical properties of TPs - such as flexible wavevector matching conditions including in-plane wavevector within the light line, existing both S- and P-polarized TPs and ability of populating with KR and RK illuminations - facilitate them for direct optical excitation. The Tamm plasmon Coupled emission (TPCE) from a combined photonic-plasmonic structure sustaining both surface plasmons (SPs) and Tamm plasmons (TPs) is described. The sensitivity of TPCE to the emission wavelength and polarization is examined with back focal plane imaging and verified with the numerical calculations. The results reveal that the excited probe can couple with both TPs and SPs, resulting in SPCE and TPCE, respectively. The TPCE angle is strongly dependent on the wavelength allowing for spectral resolution using different observation angles. These Tamm structures provide a new tool to control the optical emission from dye molecules and have many potential applications in fluorescence based-sensing and imaging.