Ubiquitin-specific protease 11 structure in complex with an engineered substrate mimetic reveals a molecular feature for deubiquitination selectivity.

Ubiquitin-specific proteases (USPs) are crucial for controlling cellular proteostasis and signaling pathways but how deubiquitination is selective remains poorly understood, in particular between paralogues. Here, we developed a fusion tag method by mining the Protein Data Bank and trapped USP11, a key regulator of DNA double-strand break repair, in complex with a novel engineered substrate mimetic. Together, this enabled structure determination of USP11 as a Michaelis-like complex that revealed key S1 and S1' binding site interactions with a substrate. Combined mutational, enzymatic, and binding experiments identified Met77 in linear diubiquitin as a significant residue that leads to substrate discrimination. We identified an aspartate "gatekeeper" residue in the S1' site of USP11 as a contributing feature for discriminating against linear diubiquitin. When mutated to a glycine, the corresponding residue in paralog USP15, USP11 acquired elevated activity toward linear diubiquitin in-gel shift assays, but not controls. The reverse mutation in USP15 confirmed that this position confers paralog-specific differences impacting diubiquitin cleavage rates. The results advance our understanding of the molecular basis for the higher selectivity of USP11 compared to USP15 and may aid targeted inhibitor development. Moreover, the reported carrier-based crystallization strategy may be applicable to other challenging targets.

P1' specificity of the S219V/R203G mutant tobacco etch virus protease.

Proteases that recognize linear amino acid sequences with high specificity became indispensable tools of recombinant protein technology for the removal of various fusion tags. Due to its stringent sequence specificity, the catalytic domain of the nuclear inclusion cysteine protease of tobacco etch virus (TEV PR) is also a widely applied reagent for enzymatic removal of fusion tags. For this reason, efforts have been made to improve its stability and modify its specificity. For example, P1' autoproteolytic cleavage-resistant mutant (S219V) TEV PR was found not only to be nearly impervious to self-inactivation, but also exhibited greater stability and catalytic efficiency than the wild-type enzyme. An R203G substitution has been reported to further relax the P1' specificity of the enzyme, however, these results were obtained from crude intracellular assays. Until now, there has been no rigorous comparison of the P1' specificity of the S219V and S219V/R203G mutants in vitro, under carefully controlled conditions. Here, we compare the P1' amino acid preferences of these single and double TEV PR mutants. The in vitro analysis was performed by using recombinant protein substrates representing 20 P1' variants of the consensus TENLYFQ*SGT cleavage site, and synthetic oligopeptide substrates were also applied to study a limited set of the most preferred variants. In addition, the enzyme-substrate interactions were analyzed in silico. The results indicate highly similar P1' preferences for both enzymes, many side-chains can be accommodated by the S1' binding sites, but the kinetic assays revealed lower catalytic efficiency for the S219V/R203G than for the S219V mutant.

Modifications of the 5' region of the CASPONTM tag's mRNA further enhance soluble recombinant protein production in Escherichia coli.

BACKGROUND: Escherichia coli is one of the most commonly used host organisms for the production of biopharmaceuticals, as it allows for cost-efficient and fast recombinant protein expression. However, challenging proteins are often produced with low titres or as inclusion bodies, and the manufacturing process needs to be developed individually for each protein. Recently, we developed the CASPONTM technology, a generic fusion tag-based platform process for high-titer soluble expression including a standardized downstream processing and highly specific enzymatic cleavage of the fusion tag. To assess potential strategies for further improvement of the N-terminally fused CASPONTM tag, we modified the 5'UTR and 5' region of the tag-coding mRNA to optimize the ribosome-mRNA interactions. RESULTS: In the present work, we found that by modifying the 5'UTR sequence of a pET30acer plasmid-based system, expression of the fusion protein CASPONTM-tumour necrosis factor α was altered in laboratory-scale carbon-limited fed-batch cultivations, but no significant increase in expression titre was achieved. Translation efficiency was highest for a construct carrying an expression enhancer element and additionally possessing a very favourable interaction energy between ribosome and mRNA (∆Gtotal). However, a construct with comparatively low transcriptional efficiency, which lacked the expression enhancer sequence and carried the most favourable ∆Gtotal tested, led to the highest recombinant protein formation alongside the reference pET30a construct. Furthermore, we found, that by introducing synonymous mutations within the nucleotide sequence of the T7AC element of the CASPONTM tag, utilizing a combination of rare and non-rare codons, the free folding energy of the nucleotides at the 5' end (-4 to + 37) of the transcript encoding the CASPONTM tag increased by 6 kcal/mol. Surprisingly, this new T7ACrare variant led to improved recombinant protein titres by 1.3-fold up to 5.3-fold, shown with three industry-relevant proteins in lab-scale carbon limited fed-batch fermentations under industrially relevant conditions. CONCLUSIONS: This study reveals some of the complex interdependencies between the ribosome and mRNA that govern recombinant protein expression. By modifying the 5'UTR to obtain an optimized interaction energy between the mRNA and the ribosome (ΔGtotal), transcript levels were changed, highlighting the different translation efficiencies of individual transcripts. It was shown that the highest recombinant titre was not obtained by the construct with the most efficient translation but by a construct with a generally high transcript amount coupled with a favourable ΔGtotal. Furthermore, an unexpectedly high potential to enhance expression by introducing silent mutations including multiple rare codons into the 5'end of the CAPONTM tag's mRNA was identified. Although the titres of the fusion proteins were dramatically increased, no formation of inclusion bodies or negative impact on cell growth was observed. We hypothesize that the drastic increase in titre is most likely caused by better ribosomal binding site accessibility. Our study, which demonstrates the influence of changes in ribosome-mRNA interactions on protein expression under industrially relevant production conditions, opens the door to the applicability of the new T7ACrare tag in biopharmaceutical industry using the CASPONTM platform process.

A histidine-rich fusion tag enables real-time monitoring of recombinant protein expression by Pauly reaction-based colorimetric assay.

Commercially available recombinant expression systems always use fusion tags to facilitate target protein purification and SDS-PAGE analysis followed by Coomassie Brilliant Blue (CBB) staining is the classical method to validate the expression level of target protein, which is time-consuming, although not very laborious. Previously, we found that a histidine-rich elastin-like polypeptide (HRELP) tag could make its fusion proteins being quickly and specifically stained with Pauly's reagent. In this study, we designed a Pauly reaction-based colorimetric assay to real-time monitoring of the expression level of recombinant protein tagged HRELP and found that the absorption value of post-induction E. coli cells stained with Pauly's reagent correlated well with both the band intensity of the target protein from Pauly's reagent-stained and CBB-stained gels. Moreover, we found the colorimetric assay could also be helpful to roughly estimate the expression efficiency by using a poly-histidine-tagged protein, which has only 1.17% histidine residue. In our opinion, Pauly reaction-based colorimetric assay could significantly shorten the time to validate the over-expression of recombinant protein tagged with either HRELP or poly-histidine. And HRELP seemed to be an ideal fusion tag for it can not only facilitate protein purification but also simplify protein detection.

Factors involved in heterologous expression of proteins in E. coli host.

The production of recombinant proteins is one of the most significant achievements of biotechnology in the last century. These proteins are produced in the eukaryotic or prokaryotic heterologous hosts. By increasing the omics data especially related to different heterologous hosts as well as the presence of new amenable genetic engineering tools, we can artificially engineer heterologous hosts to produce recombinant proteins in sufficient quantities. Numerous recombinant proteins have been produced and applied in various industries, and the global recombinant proteins market size is expected to be cast to reach USD 2.4 billion by 2027. Therefore, identifying the weakness and strengths of heterologous hosts is critical to optimize the large-scale biosynthesis of recombinant proteins. E. coli is one of the popular hosts to produce recombinant proteins. Scientists reported some bottlenecks in this host, and due to the increasing demand for the production of recombinant proteins, there is an urgent need to improve this host. In this review, we first provide general information about the E. coli host and compare it with other hosts. In the next step, we describe the factors involved in the expression of the recombinant proteins in E. coli. Successful expression of recombinant proteins in E. coli requires a complete elucidation of these factors. Here, the characteristics of each factor will be fully described, and this information can help to improve the heterologous expression of recombinant proteins in E. coli.

Detection of human annexin A1 as the novel N-terminal tag for separation and purification handle.

BACKGROUND: Several fusion tags for separation handle have been developed, but the fused tag for simply and cheaply separating the target protein is still lacking. RESULTS: Separation conditions for the human annexin A1 (hanA1) tagged emerald green fluorescent protein (EmGFP) in Escherichia coli were optimized via precipitation with calcium chloride (CaCl2) and resolubilization with ethylenediamine tetraacetic acid disodium salt (EDTA-Na2). The HanA1-EmGFP absorbing with other three affinity matrix was detected, only it was strongly bound to heparin Sepharose. The separation efficiency of the HanA1-EmGFP was comparable with purification efficiency of the His6-tagged HanA1-EmGFP via metal ion affinity chromatography. Three fluorescent proteins for the EmGFP, mCherry red fluorescent protein and flavin-binding cyan-green fluorescent protein LOV from Chlamydomonas reinhardtii were used for naked-eye detection of the separation and purification processes, and two colored proteins including a red protein for a Vitreoscilla hemoglobin (Vhb), and a brown protein for maize sirohydrochlorin ferrochelatase (mSF) were used for visualizing the separation process. The added EDTA-Na2 disrupted the Fe-S cluster in the mSF, but it showed little impact on heme in Vhb. CONCLUSIONS: The selected five colored proteins were efficient for detecting the applicability of the highly selective hanA1 for fusion separation and purification handle. The fused hanA1 tag will be potentially used for simple and cheap affinity separation of the target proteins in industry and diagnosis.

High-Yield Preparation of American Oyster Defensin (AOD) via a Small and Acidic Fusion Tag and Its Functional Characterization.

The marine peptide, American oyster defensin (AOD), is derived from Crassostrea virginica and exhibits a potent bactericidal effect. However, recombinant preparation has not been achieved due to the high charge and hydrophobicity. Although the traditional fusion tags such as Trx and SUMO shield the effects of target peptides on the host, their large molecular weight (12-20 kDa) leads to the yields lower than 20% of the fusion protein. In this study, a short and acidic fusion tag was employed with a compact structure of only 1 kDa. Following 72 h of induction in a 5 L fermenter, the supernatant exhibited a total protein concentration of 587 mg/L. The recombinant AOD was subsequently purified through affinity chromatography and enterokinase cleavage, resulting in the final yield of 216 mg/L and a purity exceeding 93%. The minimum inhibitory concentrations (MICs) of AOD against Staphylococcus aureus, Staphylococcus epidermidis, and Streptococcus galactis ranged from 4 to 8 µg/mL. Moreover, time-killing curves indicated that AOD achieved a bactericidal rate of 99.9% against the clinical strain S. epidermidis G-81 within 0.5 h at concentrations of 2× and 4× MIC. Additionally, the activity of AOD was unchanged after treatment with artificial gastric fluid and intestinal fluid for 4 h. Biocompatibility testing demonstrated that AOD, at a concentration of 128 µg/mL, exhibited a hemolysis rate of less than 0.5% and a cell survival rate of over 83%. Furthermore, AOD's in vivo therapeutic efficacy against mouse subcutaneous abscess revealed its capability to restrain bacterial proliferation and reduce bacterial load, surpassing that of antibiotic lincomycin. These findings indicate AOD's potential for clinical usage.

The Functional Characteristics and Soluble Expression of Saffron CsCCD2.

Crocins are important natural products predominantly obtained from the stigma of saffron, and that can be utilized as a medicinal compound, spice, and colorant with significant promise in the pharmaceutical, food, and cosmetic industries. Carotenoid cleavage dioxygenase 2 (CsCCD2) is a crucial limiting enzyme that has been reported to be responsible for the cleavage of zeaxanthin in the crocin biosynthetic pathway. However, the catalytic activity of CsCCD2 on ß-carotene/lycopene remains elusive, and the soluble expression of CsCCD2 remains a big challenge. In this study, we reported the functional characteristics of CsCCD2, that can catalyze not only zeaxanthin cleavage but also ß-carotene and lycopene cleavage. The molecular basis of the divergent functionality of CsCCD2 was elucidated using bioinformatic analysis and truncation studies. The protein expression optimization results demonstrated that the use of a maltose-binding protein (MBP) tag and the optimization of the induction conditions resulted in the production of more soluble protein. Correspondingly, the catalytic efficiency of soluble CsCCD2 was higher than that of the insoluble one, and the results further validated its functional verification. This study not only broadened the substrate profile of CsCCD2, but also achieved the soluble expression of CsCCD2. It provides a firm platform for CsCCD2 crystal structure resolution and facilitates the synthesis of crocetin and crocins.

Molecular chaperone GroEL-GroES enhances the soluble expression of biologically active ovine growth hormone in the prokaryotic system.

Growth hormone (GH) plays important roles in growth and development of mammalian animals and is valuable for many applications. This study aimed to express and purify biological active recombinant ovine growth hormone (roGH) through prokaryotic expression system. The roGH coding sequence was ligated into the prokaryotic expression vector and transformed into Escherichia coli (E. coli) for protein expression. Factors that influence the roGH expression were examined and the appropriate culture temperature (20 °C) and inducer (IPTG) concentration (25 µM) were determined. To enhance the soluble expression of the protein, co-expression with the molecular chaperone GroEL-GroES was utilized and eventually achieved a high yield of soluble roGH expressed in E. coli. Further, the fusion tag in expressed target protein could be efficiently removed through thrombin-specific cleavage. The expressed roGH was identified by Western blotting and the LC-MS spectrum confirmed its molecular weight of 22749.22 Da. Finally, the purified roGH had an expected biological activity when assayed in cell models in vitro and experimental mouse in vivo. In conclusion, the present study established an efficient and simple approach to produce recombinant GH, and facilitate relevant research and applications.

Retro-protein XXA is a remarkable solubilizing fusion tag for inclusion bodies.

BACKGROUND: Producing large amounts of soluble proteins from bacteria remains a challenge, despite the help of current various solubilizing fusion tags. Thus, developing novel tags is necessary. Antifreeze protein (AFP) has excellent solubility and hydrophilicity, but there are no current reports on its use as a solubilizing fusion tag. Additionally, there is no precedent for using retro-proteins (reverse sequence) as solubilizing fusion tags. Therefore, we selected the antifreeze protein AXX and obtained its retro-protein XXA by synthesizing the XXA gene for the development of a new solubilizing fusion tag. RESULTS: XXA exhibits better stability and ease of expression than AXX; hence, we focused the development of the solubilizing fusion tag on XXA. XXA fused with the tested inclusion bodies, significantly increasing the soluble expression compared with commonly used solubilizing fusion tags such as GST, Trx, Sumo, MBP, and NusA. The tested proteins became soluble after fusion with the XXA tag, and they could be purified. They maintained a soluble form after XXA tag removal. Finally, we used enzymatic digestion reaction and western blot experiments to verify that bdNEDP1 and NbALFA, which were soluble expressed by fusion with XXA, were active. CONCLUSION: We developed the novel solubilizing fusion tag XXA, which could more effectively facilitate the soluble expression of inclusion bodies compared with current commonly used tags. XXA could function at both low and high temperatures, and its moderate molecular weight has a limited impact on the output. These properties make XXA an ideal fusion tag for future research and industrial production. Moreover, for the first time, we highlighted the broad potential of antifreeze protein as a solubilizing fusion tag, bringing retro-protein into practical application.

A Multi-Disulfide Receptor-Binding Domain (RBD) of the SARS-CoV-2 Spike Protein Expressed in E. coli Using a SEP-Tag Produces Antisera Interacting with the Mammalian Cell Expressed Spike (S1) Protein.

An Escherichia coli (E. coli) production of the receptor-binding domain (RBD) of the SARS-CoV-2 (isolate Wuhan-Hu-1) spike protein would significantly accelerate the search for anti-COVID-19 therapeutics because of its versatility and low cost. However, RBD contains four disulfide bonds and its expression in E. coli is limited by the formation of aberrant disulfide bonds resulting in inclusion bodies. Here, we show that a solubility-enhancing peptide (SEP) tag containing nine arginine residues (RBD-C9R) attached at the C-terminus can overcome this problem. The SEP-tag increased the expression in the soluble fraction and the final yield by five times (2 mg/L). The folding properties of the E. coli expressed RBD-C9R were demonstrated with biophysical characterization using RP-HPLC, circular dichroism, thermal denaturation, fluorescence, and light scattering. A quartz crystal microbalance (QCM) analysis confirmed the binding activity of RBD-C9R with ACE2, the host cell's receptor. In addition, RBD-C9R elicited a Th-2 immune response with a high IgG titer in Jcl: ICR mice. The RBD-C9R antisera interacted with both itself and the mammalian-cell expressed spike protein (S1), as demonstrated by ELISA, indicating that the E. coli expressed RBD-C9R harbors native-like epitopes. Overall, these results emphasize the potential of our SEP-tag for the E. coli production of active multi-disulfide-bonded RBD.

Characterization of the Fc-III-4C-based recombinant protein expression system by using carbonic anhydrase as the model protein.

Development of new affinity tags is important for recombinant protein expression and purification. Based on our earlier work, we devised an affinity tag by addition of two cysteine residues onto the N- and C-termini of the Fc-III peptide and designated as the Fc-III-4C tag, in which four cysteine residues form two disulfide linkages. The binding affinity of Fc-III-4C tag to human IgG is measured as 2.28 nM (Kd) and is 100 times higher than that of the Fc-III tag to IgG. Fc-III-4C tagged carbonic anhydrase (CA) can be effectively purified with IgG-immobilized beads, and Fc-III-4C tag does not possess adverse effects on the structure and stability of CA. Furthermore, the Fc-III-4C tagged protein binds to multiple transition metal ions, which enhances activities of enzymes that use metal ions as co-factors. These results suggest that Fc-III-4C tag is a useful tool for expression and purification of recombinant proteins and enhances the activities of some fusion proteins that use Zn2+ or Cu2+ as cofactors.

A novel protein fusion partner, carbohydrate-binding module family 66, to enhance heterologous protein expression in Escherichia coli.

BACKGROUND: Proteins with novel functions or advanced activities developed by various protein engineering techniques must have sufficient solubility to retain their bioactivity. However, inactive protein aggregates are frequently produced during heterologous protein expression in Escherichia coli. To prevent the formation of inclusion bodies, fusion tag technology has been commonly employed, owing to its good performance in soluble expression of target proteins, ease of application, and purification feasibility. Thus, researchers have continuously developed novel fusion tags to expand the expression capacity of high-value proteins in E. coli. RESULTS: A novel fusion tag comprising carbohydrate-binding module 66 (CBM66) was developed for the soluble expression of heterologous proteins in E. coli. The target protein solubilization capacity of the CBM66 tag was verified using seven proteins that are poorly expressed or form inclusion bodies in E. coli: four human-derived signaling polypeptides and three microbial enzymes. Compared to native proteins, CBM66-fused proteins exhibited improved solubility and high production titer. The protein-solubilizing effect of the CBM66 tag was compared with that of two commercial tags, maltose-binding protein and glutathione-S-transferase, using poly(ethylene terephthalate) hydrolase (PETase) as a model protein; CBM66 fusion resulted in a 3.7-fold higher expression amount of soluble PETase (approximately 370 mg/L) compared to fusion with the other commercial tags. The intact PETase was purified from the fusion protein upon serial treatment with enterokinase and affinity chromatography using levan-agarose resin. The bioactivity of the three proteins assessed was maintained even when the CBM66 tag was fused. CONCLUSIONS: The use of the CBM66 tag to improve soluble protein expression facilitates the easy and economic production of high-value proteins in E. coli.

Development of clone with novel TrpE fusion tag in E. coli for overexpression of trypsin in a bench-scale bioreactor.

Trypsin is a key enzyme under the serine proteases that is found in the pancreas which plays a key role in protein digestion. It cleaves peptide chains mainly at the carboxyl side of the amino acids lysine or arginine. This enzyme has received greater attention mainly due to its increased use in the removal of fusion tags during protein purification and its role in the processing of biosimilars like insulin. The present study was carried out to develop a clone with Novel TrpLE1413(TrpE) Fusion Tag for enhanced expression of trypsin which helps in cost reduction of biosimilar processing. In our experiment we have used a synthetic bovine trypsin gene containing a novel fusion tag TrpE at its N terminus, which was cloned into the pET41b (+) vector and expressed in E. coli BL21 (DE3) in a lab-scale bioreactor. Using the optimized fermentation process with TrpE Fusion Tag, 27.8 g/L inclusion bodies were produced at the end of fermentation, of which 209 mg/L of active trypsin was obtained after purification. In contrast, previous reports have claimed to produce a maximum of 60 mg/L of the enzyme without the fusion tag. Thus based on our findings, the small size (less than 2 kDa) of TrpE tag and its hydrophobicity may reduce the loss incurred during the purification process. Hence, it could be discerned that the use of the TrpE fusion tag along with a robust fermentation process led to 3- 4 fold higher yield making it a commercially viable process facilitating an improved recovery of the enzyme.

Nicotinamide phosphoribosyltransferase purification using SUMO expression system.

Nicotinamide phosphoribosyltransferase (NAMPT) is a rate-limiting enzyme in the salvage pathway required for nicotinamide adenine dinucleotide synthesis. The secreted NAMPT protein serves as a master regulatory cytokine involved in activation of evolutionarily conserved inflammatory networks. Appreciation of the role of NAMPT as a damage-associated molecular pattern protein (DAMP) has linked its activities to several disorders via Toll-like receptor 4 (TLR4) binding and inflammatory cascade activation. Information is currently lacking concerning the precise mode of the NAMPT protein functionality due to limited availability of purified protein for use in in vitro and in vivo studies. Here we report successful NAMPT expression using the pET-SUMO expression vector in E. coli strain SHuffle containing a hexa-His tag for purification. The Ulp1 protease was used to cleave the SUMO and hexa-His tags, and the protein was purified by immobilized-metal affinity chromatography. The protein yield was ~4 mg/L and initial biophysical characterization of the protein using circular dichroism revealed the secondary structural elements, while dynamic light scattering demonstrated the presence of oligomeric units. The NAMPT-SUMO showed a predominantly dimeric protein with functional enzymatic activity. Finally, we report NAMPT solubilization in n-dodecyl-ß-d-maltopyranoside (DDM) detergent in monomeric form, thus enhancing the opportunity for further structural and functional investigations.

Coiled-coil inspired functional inclusion bodies.

BACKGROUND: Recombinant protein expression in bacteria often leads to the formation of intracellular insoluble protein deposits, a major bottleneck for the production of soluble and active products. However, in recent years, these bacterial protein aggregates, commonly known as inclusion bodies (IBs), have been shown to be a source of stable and active protein for biotechnological and biomedical applications. The formation of these functional IBs is usually facilitated by the fusion of aggregation-prone peptides or proteins to the protein of interest, leading to the formation of amyloid-like nanostructures, where the functional protein is embedded. RESULTS: In order to offer an alternative to the classical amyloid-like IBs, here we develop functional IBs exploiting the coiled-coil fold. An in silico analysis of coiled-coil and aggregation propensities, net charge, and hydropathicity of different potential tags identified the natural homo-dimeric and anti-parallel coiled-coil ZapB bacterial protein as an optimal candidate to form assemblies in which the native state of the fused protein is preserved. The protein itself forms supramolecular fibrillar networks exhibiting only α-helix secondary structure. This non-amyloid self-assembly propensity allows generating innocuous IBs in which the recombinant protein of interest remains folded and functional, as demonstrated using two different fluorescent proteins. CONCLUSIONS: Here, we present a proof of concept for the use of a natural coiled-coil domain as a versatile tool for the production of functional IBs in bacteria. This α-helix-based strategy excludes any potential toxicity drawback that might arise from the amyloid nature of ß-sheet-based IBs and renders highly active and homogeneous submicrometric particles.

The signal peptide of Cry1Ia can improve the expression of eGFP or mCherry in Escherichia coli and Bacillus thuringiensis and enhance the host's fluorescent intensity.

BACKGROUND: The signal peptides (SPs) of secretory proteins are frequently used or modified to guide recombinant proteins outside the cytoplasm of prokaryotic cells. In the periplasmic space and extracellular environment, recombinant proteins are kept away from the intracellular proteases and often they can fold correctly and efficiently. Consequently, expression levels of the recombinant protein can be enhanced by the presence of a SP. However, little attention has been paid to the use of SPs with low translocation efficiency for recombinant protein production. In this paper, the function of the signal peptide of Bacillus thuringiensis (Bt) Cry1Ia toxin (Iasp), which is speculated to be a weak translocation signal, on regulation of protein expression was investigated using fluorescent proteins as reporters. RESULTS: When fused to the N-terminal of eGFP or mCherry, the Iasp can improve the expression of the fluorescent proteins and as a consequence enhance the fluorescent intensity of both Escherichia coli and Bt host cells. Real-time quantitative PCR analysis revealed the higher transcript levels of Iegfp over those of egfp gene in E. coli TG1 cells. By immunoblot analysis and confocal microscope observation, lower translocation efficiency of IeGFP was demonstrated. The novel fluorescent fusion protein IeGFP was then used to compare the relative strengths of cry1Ia (Pi) and cry1Ac (Pac) gene promoters in Bt strain, the latter promoter proving the stronger. The eGFP reporter, by contrast, cannot indicate unambiguously the regulation pattern of Pi at the same level of sensitivity. The fluorescent signals of E. coli and Bt cells expressing the Iasp fused mCherry (ImCherry) were also enhanced. Importantly, the Iasp can also enhanced the expression of two difficult-to-express proteins, matrix metalloprotease-13 (MMP13) and myostatin (growth differentiating factor-8, GDF8) in E. coli BL21-star (DE3) strain. CONCLUSIONS: We identified the positive effects of a weak signal peptide, Iasp, on the expression of fluorescent proteins and other recombinant proteins in bacteria. The produced IeGFP and ImCherry can be used as novel fluorescent protein variants in prokaryotic cells. The results suggested the potential application of Iasp as a novel fusion tag for improving the recombinant protein expression.

Fusion tags to enhance heterologous protein expression.

Escherichia coli is the most widely used heterologous protein expression system. However, this system remains a challenge due to the low solubility of proteins, insufficient yield, and inclusion body formation. Numerous approaches have sought to address these issues. The use of a fusion tag is one of the most powerful strategies for obtaining large amounts of heterologous protein in E. coli expression system. Here, recent advances in fusion tags that increase the expression of proteins are reviewed. In addition, proposed concepts for designing peptide tags to increase protein expression are discussed.

Application of an S-layer protein as a self-aggregating tag for cost-effective separation of recombinant human and yeast D-amino acid oxidases in the aqueous two-phase system.

OBJECTIVE: To evaluate whether the surface layer (S-layer) protein of Lactobacillus brevis serves as a self-aggregating protein tag for cost-effective separation of human and yeast D-amino acid oxidases (hDAAO and yDAAO) expressed in E. coli. RESULTS: In aqueous two-phase (PEG-phosphate) system, the S-layer:DAAO fusion proteins (shDAAO and syDAAO) were separated at the interface with a recovery of 82 ± 10.6% for shDAAO and 95 ± 1.9% for syDAAO. Some shDAAO proteins were separated as precipitates with a recovery of 41 ± 0.5% in phosphate (9%, w/w) using PEG 3000 and PEG 4000 (16%, w/w), while some syDAAO proteins were also isolated as precipitates with a recovery of 75 ± 17.5% in phosphate (9%, w/w) using PEG 4000 and PEG 8000 (16%, w/w). CONCLUSIONS: The S-layer of L. brevis was applied to a self-assembled protein tag to enable cost-effective separation of human and yeast D-amino acid oxidases expressed in E. coli cells. Because of the self-assembling properties of S-layer proteins, human and yeast D-amino acid oxidases fused with S-layer proteins could be easily separated by aggregates at the interface and/or in a few conditions by precipitates to the bottom of the PEG-phosphate aqueous system.

Soluble expression of mature Rhizopus chinensis lipase in Escherichia coli and enhancement of its ester synthesis activity.

The production of membrane-associated lipase from Rhizopus chinensis (RCL), which has a high ester synthesis activity and important potential applications, is difficult in heterologous expression system such as Escherichia coli and often leads to the formation of inclusion bodies. Here, we describe the soluble expression of mature RCL (mRCL) using maltose-binding protein (MBP) as a solubility-enhancing tag in the E. coli system. Although the MBP-mRCL fusion protein was soluble, mRCL was insoluble after removal of the MBP tag in E. coli BL21 (DE3). Using E. coli BL21 trxB (DE3) as an expression host, soluble mRCL was obtained and expression conditions were optimized. Furthermore, the ester synthesis activity of soluble mRCL was increased by detergent treatment and was found to be 3.5 and 1.5 times higher than those of the untreated enzyme and naturally occurring enzyme, respectively. Overall, this study provides a potential approach for producing active and soluble forms of eukaryotic lipases in a heterologous E. coli expression system.