Anthocyanin glucosylation mediated by a glycoside hydrolase family 3 protein in purple carrot.

Purple carrot accumulates anthocyanins modified with galactose, xylose, glucose, and sinapic acid. Most of the genes associated with anthocyanin biosynthesis have been identified, except for the glucosyltransferase genes involved in the step before the acylation in purple carrot. Anthocyanins are commonly glycosylated in reactions catalyzed by UDP-sugar-dependent glycosyltransferases (UGTs). Although many studies have been conducted on UGTs, the glucosylation of carrot anthocyanins remains unknown. Acyl-glucose-dependent glucosyltransferase activity modifying cyanidin 3-xylosylgalactoside was detected in the crude protein extract prepared from purple carrot cultured cells. In addition, the corresponding enzyme was purified. The cDNA encoding this glucosyltransferase was isolated based on the partial amino acid sequence of the purified protein. The recombinant protein produced in Nicotiana benthamiana leaves via agroinfiltration exhibited anthocyanin glucosyltransferase activity. This glucosyltransferase belongs to the glycoside hydrolase family 3 (GH3). The expression pattern of the gene encoding this GH3-type anthocyanin glucosyltransferase was consistent with anthocyanin accumulation in carrot tissues and cultured cells.

Novel glycosidase from Paenibacillus lactis 154 hydrolyzing the 28-O-ß-D-glucopyranosyl ester bond of oleanane-type saponins.

Oleanane-type ginsenosides are a class of compounds with remarkable pharmacological activities. However, the lack of effective preparation methods for specific rare ginsenosides has hindered the exploration of their pharmacological properties. In this study, a novel glycoside hydrolase PlGH3 was cloned from Paenibacillus lactis 154 and heterologous expressed in Escherichia coli. Sequence analysis revealed that PlGH3 consists of 749 amino acids with a molecular weight of 89.5 kDa, exhibiting the characteristic features of the glycoside hydrolase 3 family. The enzymatic characterization results of PlGH3 showed that the optimal reaction pH and temperature was 8 and 50 °C by using p-nitrophenyl-ß-D-glucopyranoside as a substrate, respectively. The Km and kcat values towards ginsenoside Ro were 79.59 ± 3.42 µM and 18.52 s-1, respectively. PlGH3 exhibits a highly specific activity on hydrolyzing the 28-O-ß-D-glucopyranosyl ester bond of oleanane-type saponins. The mechanism of hydrolysis specificity was then presumably elucidated through molecular docking. Eventually, four kinds of rare oleanane-type ginsenosides (calenduloside E, pseudoginsenoside RP1, zingibroside R1, and tarasaponin VI) were successfully prepared by biotransforming total saponins extracted from Panax japonicus. This study contributes to understanding the mechanism of enzymatic hydrolysis of the GH3 family and provides a practical route for the preparation of rare oleanane-type ginsenosides through biotransformation. KEY POINTS: • The glucose at C-28 in oleanane-type saponins can be directionally hydrolyzed. • Mechanisms to interpret PlGH3 substrate specificity by molecular docking. • Case of preparation of low-sugar alternative saponins by directed hydrolysis.

Comparison of glycoside hydrolase family 3 ß-xylosidases from basidiomycetes and ascomycetes reveals evolutionarily distinct xylan degradation systems.

Xylan is the most common hemicellulose in plant cell walls, though the structure of xylan polymers differs between plant species. Here, to gain a better understanding of fungal xylan degradation systems, which can enhance enzymatic saccharification of plant cell walls in industrial processes, we conducted a comparative study of two glycoside hydrolase family 3 (GH3) ß-xylosidases (Bxls), one from the basidiomycete Phanerochaete chrysosporium (PcBxl3), and the other from the ascomycete Trichoderma reesei (TrXyl3A). A comparison of the crystal structures of the two enzymes, both with saccharide bound at the catalytic center, provided insight into the basis of substrate binding at each subsite. PcBxl3 has a substrate-binding pocket at subsite -1, while TrXyl3A has an extra loop that contains additional binding subsites. Furthermore, kinetic experiments revealed that PcBxl3 degraded xylooligosaccharides faster than TrXyl3A, while the KM values of TrXyl3A were lower than those of PcBxl3. The relationship between substrate specificity and degree of polymerization of substrates suggested that PcBxl3 preferentially degrades xylobiose (X2), while TrXyl3A degrades longer xylooligosaccharides. Moreover, docking simulation supported the existence of extended positive subsites of TrXyl3A in the extra loop located at the N-terminus of the protein. Finally, phylogenetic analysis suggests that wood-decaying basidiomycetes use Bxls such as PcBxl3 that act efficiently on xylan structures from woody plants, whereas molds use instead Bxls that efficiently degrade xylan from grass. Our results provide added insights into fungal efficient xylan degradation systems.

Crystal structure and identification of amino acid residues for catalysis and binding of GH3 AnBX ß-xylosidase from Aspergillus niger.

ß-Xylosidases catalyze the hydrolysis of xylooligosaccharides to xylose in the final step of hemicellulose degradation. AnBX, which is a GH3 ß-xylosidase from Aspergillus niger, has a high catalytic efficiency toward xyloside substrates. In this study, we report the three-dimensional structure and the identification of catalytic and substrate binding residues of AnBX by performing site-directed mutagenesis, kinetic analysis, and NMR spectroscopy-associated analysis of the azide rescue reaction. The structure of the E88A mutant of AnBX, determined at 2.5-Å resolution, contains two molecules in the asymmetric unit, each of which is composed of three domains, namely an N-terminal (ß/α)8 TIM-barrel-like domain, an (α/ß)6 sandwich domain, and a C-terminal fibronectin type III domain. Asp288 and Glu500 of AnBX were experimentally confirmed to act as the catalytic nucleophile and acid/base catalyst, respectively. The crystal structure revealed that Trp86, Glu88 and Cys289, which formed a disulfide bond with Cys321, were located at subsite -1. Although the E88D and C289W mutations reduced catalytic efficiency toward all four substrates tested, the substitution of Trp86 with Ala, Asp and Ser increased the substrate preference for glucoside relative to xyloside substrates, indicating that Trp86 is responsible for the xyloside specificity of AnBX. The structural and biochemical information of AnBX obtained in this study provides invaluable insight into modulating the enzymatic properties for the hydrolysis of lignocellulosic biomass. KEY POINTS: • Asp288 and Glu500 of AnBX are the nucleophile and acid/base catalyst, respectively • Glu88 and the Cys289-Cys321 disulfide bond are crucial for the catalytic activity of AnBX • The W86A and W86S mutations in AnBX increased the preference for glucoside substrates.

Identification and characterization of extracellular GH3 ß-glucosidase from the pink snow mold fungus, Microdochium nivale.

Glycoside hydrolase family 3 (GH3) ß-glucosidase exists in many filamentous fungi. In phytopathogenic fungi, it is involved in fungal growth and pathogenicity. Microdochium nivale is a severe phytopathogenic fungus of grasses and cereals and is the causal agent of pink snow mold, but its ß-glucosidase has not been identified. In this study, a GH3 ß-glucosidase of M. nivale (MnBG3A) was identified and characterized. Among various p-nitrophenyl ß-glycosides, MnBG3A showed activity on d-glucoside (pNP-Glc) and slight activity on d-xyloside. In the pNP-Glc hydrolysis, substrate inhibition occurred (Kis = 1.6 m m), and d-glucose caused competitive inhibition (Ki = 0.5 m m). MnBG3A acted on ß-glucobioses with ß1-3, -6, -4, and -2 linkages, in descending order of kcat/Km. In contrast, the regioselectivity for newly formed products was limited to ß1-6 linkage. MnBG3A has similar features to those of ß-glucosidases from Aspergillus spp., but higher sensitivity to inhibitory effects.

Crystal structure and substrate recognition mechanism of Aspergillus oryzae isoprimeverose-producing enzyme.

Isoprimeverose-producing enzymes (IPases) release isoprimeverose (α-d-xylopyranosyl-(1 → 6)-d-glucopyranose) from the non-reducing end of xyloglucan oligosaccharides. Aspergillus oryzae IPase (IpeA) is classified as a member of the glycoside hydrolase family 3 (GH3); however, it has unusual substrate specificity compared with other GH3 enzymes. Xylopyranosyl branching at the non-reducing ends of xyloglucan oligosaccharides is vital for IpeA activity. We solved the crystal structure of IpeA with isoprimeverose at 2.4 Šresolution, showing that the structure of IpeA formed a dimer and was composed of three domains: an N-terminal (ß/α)8 TIM-barrel domain, α/ß/α sandwich fold domain, and a C-terminal fibronectin-like domain. The catalytic TIM-barrel domain possessed a catalytic nucleophile (Asp300) and acid/base (Glu524) residues. Interestingly, we found that the cavity of the active site of IpeA was larger than that of other GH3 enzymes, and subsite -1' played an important role in its activity. The glucopyranosyl and xylopyranosyl residues of isoprimeverose were located at subsites -1 and -1', respectively. Gln58 and Tyr89 contributed to the interaction with the xylopyranosyl residue of isoprimeverose through hydrogen bonding and stacking effects, respectively. Our findings provide new insights into the substrate recognition of GH3 enzymes.

Gtgen3A, a novel plant GH3 ß-glucosidase, modulates gentio-oligosaccharide metabolism in Gentiana.

Gentiobiose, a ß-1,6-linked glycosyl-disaccharide, accumulates abundantly in Gentianaceae and is involved in aspects of plant development, such as fruits ripening and release of bud dormancy. However, the mechanisms regulating the amount of gentio-oligosaccharide accumulation in plants remain obscure. The present study aimed to identify an enzyme that modulates gentio-oligosaccharide amount in gentian (Gentiana triflora). A protein responsible for gentiobiose hydrolysis, GtGen3A, was identified by partial purification and its peptide sequence analysis. The enzyme had a molecular mass of ∼67 kDa without a secretory signal peptide sequence. Sequence analysis revealed that GtGen3A could be a ß-glucosidase member belonging to glycoside hydrolase family 3 (GH3). GtGen3A showed a homology to GH3 ß-glucan exohydrolases, ExoI of Hordeum vulgare, and ExgI from Zea mays, which preferentially hydrolyzed ß-1,3- and ß-1,4-linked oligosaccharides. The purified recombinant GtGen3A (rGtGen3A) produced in Escherichia coli showed optimal reaction at pH 6.5 and 20°C. The rGtGen3A liberated glucose from ß-1,2-, ß-1,3-, ß-1,4-, and ß-1,6-linked oligosaccharides, and showed the highest activity toward gentiotriose among the substrates tested. Kinetic analysis also revealed that rGtGen3A preferentially hydrolyzed gentiotriose. Virus-induced gene silencing of Gtgen3A in gentian plantlets resulted in predominant accumulation of gentiotriose rather than gentiobiose. Furthermore, the expression level of Gtgen3A was almost similar to the amount of gentiobiose in field-grown gentians. These findings suggest that the main function of GtGen3A is the hydrolysis of gentiotriose to gentiobiose, and that GtGen3A plays a role in modulating gentiobiose amounts in gentian.

Identification and characterization of a novel bacterial ß-glucosidase that is highly specific for the ß-1,2-glucosidic linkage of sesaminol triglucoside.

A gene (PSTG2) coding for a novel ß-glucosidase belonging to glycoside hydrolase family 3 was identified in the vicinity of the previously identified ß-glucosidase gene [sesaminol triglucoside (STG)-hydrolyzing ß-glucosidase, PSTG1] in the genome of Paenibacillus sp. strain KB0549. Compared with PSTG1, recombinant PSTG2 more specifically acted on the ß-1,2-glucosidic linkage of the STG molecule to transiently accumulate a larger amount of 6-O-(ß-D-glucopyranosyl)-ß-D-glucopyranosylsesaminol.

Cloning, expression and characterization of ß-xylosidase from Aspergillus niger ASKU28.

ß-Xylosidases catalyze the breakdown of ß-1,4-xylooligosaccharides, which are produced from degradation of xylan by xylanases, to fermentable xylose. Due to their important role in xylan degradation, there is an interest in using these enzymes in biofuel production from lignocellulosic biomass. In this study, the coding sequence of a glycoside hydrolase family 3 ß-xylosidase from Aspergillus niger ASKU28 (AnBX) was cloned and expressed in Pichia pastoris as an N-terminal fusion protein with the α-mating factor signal sequence (α-MF) and a poly-histidine tag. The expression level was increased to 5.7 g/l in a fermenter system as a result of optimization of only five codons near the 5' end of the α-MF sequence. The recombinant AnBX was purified to homogeneity through a single-step Phenyl Sepharose chromatography. The enzyme exhibited an optimal activity at 70°C and at pH 4.0-4.5, and a very high kinetic efficiency toward a xyloside substrate. AnBX demonstrated an exo-type activity with retention of the ß-configuration, and a synergistic action with xylanase in hydrolysis of beechwood xylan. This study provides comprehensive data on characterization of a glycoside hydrolase family 3 ß-xylosidase that have not been determined in any prior investigations. Our results suggested that AnBX may be useful for degradation of lignocellulosic biomass in bioethanol production, pulp bleaching process and beverage industry.

Aspergillus niger ß-glucosidase has a cellulase-like tadpole molecular shape: insights into glycoside hydrolase family 3 (GH3) ß-glucosidase structure and function.

Aspergillus niger is known to secrete large amounts of ß-glucosidases, which have a variety of biotechnological and industrial applications. Here, we purified an A. niger ß-glucosidase (AnBgl1) and conducted its biochemical and biophysical analyses. Purified enzyme with an apparent molecular mass of 116 kDa forms monomers in solution as judged by native gel electrophoresis and has a pI value of 4.55, as found for most of the fungi of ß-glucosidases. Surprisingly, the small angle x-ray experiments reveal that AnBgl1 has a tadpole-like structure, with the N-terminal catalytic domain and C-terminal fibronectin III-like domain (FnIII) connected by the long linker peptide (∼100 amino acid residues) in an extended conformation. This molecular organization resembles the one adopted by other cellulases (such as cellobiohydrolases, for example) that frequently contain a catalytic domain linked to the cellulose-binding module that mediates their binding to insoluble and polymeric cellulose. The reasons why AnBgl1, which acts on the small soluble substrates, has a tadpole molecular shape are not entirely clear. However, our enzyme pulldown assays with different polymeric substrates suggest that AnBgl1 has little or no capacity to bind to and to adsorb cellulose, xylan, and starch, but it has high affinity to lignin. Molecular dynamics simulations suggested that clusters of residues located in the C-terminal FnIII domain interact strongly with lignin fragments. The simulations showed that numerous arginine residues scattered throughout the FnIII surface play an important role in the interaction with lignin by means of cation-π stacking with the lignin aromatic rings. These results indicate that the C-terminal FnIII domain could be operational for immobilization of the enzyme on the cell wall and for the prevention of unproductive binding of cellulase to the biomass lignin.

A novel GH3-ß-glucosidase from soda lake metagenomic libraries with desirable properties for biomass degradation.

Beta-glucosidases catalyze the hydrolysis of the glycosidic bonds of cellobiose, producing glucose, which is a rate-limiting step in cellulose biomass degradation. In industrial processes, ß-glucosidases that are tolerant to glucose and stable under harsh industrial reaction conditions are required for efficient cellulose hydrolysis. In this study, we report the molecular cloning, Escherichia coli expression, and functional characterization of a ß-glucosidase from the gene, CelGH3_f17, identified from metagenomics libraries of an Ethiopian soda lake. The CelGH3_f17 gene sequence contains a glycoside hydrolase family 3 catalytic domain (GH3). The heterologous expressed and purified enzyme exhibited optimal activity at 50 °C and pH 8.5. In addition, supplementation of 1 M salt and 300 mM glucose enhanced the ß-glucosidase activity. Most of the metal ions and organic solvents tested did not affect the ß-glucosidase activity. However, Cu2+ and Mn2+ ions, Mercaptoethanol and Triton X-100 reduce the activity of the enzyme. The studied ß-glucosidase enzyme has multiple industrially desirable properties including thermostability, and alkaline, salt, and glucose tolerance.

Use of xylosidase 3C from Segatella baroniae to discriminate xylan non-reducing terminus substitution characteristics.

OBJECTIVE: New characterized carbohydrate-active enzymes are needed for use as tools to discriminate complex carbohydrate structural features. Fungal glycoside hydrolase family 3 (GH3) ß-xylosidases have been shown to be useful for the structural elucidation of glucuronic acid (GlcA) and arabinofuranose (Araf) substituted oligoxylosides. A homolog of these GH3 fungal enzymes from the bacterium Segatella baroniae (basonym Prevotella bryantii), Xyl3C, has been previously characterized, but those studies did not address important functional specificity features. In an interest to utilize this enzyme for laboratory methods intended to discriminate the structure of the non-reducing terminus of substituted xylooligosaccharides, we have further characterized this GH3 xylosidase. RESULTS: In addition to verification of basic functional characteristics of this xylosidase we have determined its mode of action as it relates to non-reducing end xylose release from GlcA and Araf substituted oligoxylosides. Xyl3C cleaves xylose from the non-reducing terminus of ß-1,4-xylan until occurrence of a penultimate substituted xylose. If this substitution is O2 linked, then Xyl3C removes the non-reducing xylose to leave the substituted xylose as the new non-reducing terminus. However, if the substitution is O3 linked, Xyl3C does not hydrolyze, thus leaving the substitution one-xylose (penultimate) from the non-reducing terminus. Hence, Xyl3C enables discrimination between O2 and O3 linked substitutions on the xylose penultimate to the non-reducing end. These findings are contrasted using a homologous enzyme also from S. baroniae, Xyl3B, which is found to yield a penultimate substituted nonreducing terminus regardless of which GlcA or Araf substitution exists.

Deciphering domain structures of Aspergillus and Streptomyces GH3-ß-Glucosidases: a screening system for enzyme engineering and biotechnological applications.

The glycoside hydrolase family 3 (GH3) ß-glucosidases from filamentous fungi are crucial industrial enzymes facilitating the complete degradation of lignocellulose, by converting cello-oligosaccharides and cellobiose into glucose. Understanding the diverse domain organization is essential for elucidating their biological roles and potential biotechnological applications. This research delves into the variability of domain organization within GH3 ß-glucosidases. Two distinct configurations were identified in fungal GH3 ß-glucosidases, one comprising solely the GH3 catalytic domain, and another incorporating the GH3 domain with a C-terminal fibronectin type III (Fn3) domain. Notably, Streptomyces filamentous bacteria showcased a separate clade of GH3 proteins linking the GH3 domain to a carbohydrate binding module from family 2 (CBM2). As a first step to be able to explore the role of accessory domains in ß-glucosidase activity, a screening system utilizing the well-characterised Aspergillus niger ß-glucosidase gene (bglA) in bglA deletion mutant host was developed. Based on this screening system, reintroducing the native GH3-Fn3 gene successfully expressed the gene allowing detection of the protein using different enzymatic assays. Further investigation into the role of the accessory domains in GH3 family proteins, including those from Streptomyces, will be required to design improved chimeric ß-glucosidases enzymes for industrial application.

Structural insights into a bacterial ß-glucosidase capable of degrading sesaminol triglucoside to produce sesaminol: toward the understanding of the aglycone recognition mechanism by the C-terminal lid domain.

The sesaminol triglucoside (STG)-hydrolyzing ß-glucosidase from Paenibacillus sp. (PSTG1), which belongs to glycoside hydrolase family 3 (GH3), is a promising catalyst for the industrial production of sesaminol. We determined the X-ray crystal structure of PSTG1 with bound glycerol molecule in the putative active site. PSTG1 monomer contained typical three domains of GH3 with the active site in domain 1 (TIM barrel). In addition, PSTG1 contained an additional domain (domain 4) at the C-terminus that interacts with the active site of the other protomer as a lid in the dimer unit. Interestingly, the interface of domain 4 and the active site forms a hydrophobic cavity probably for recognizing the hydrophobic aglycone moiety of substrate. The short flexible loop region of TIM barrel was found to be approaching the interface of domain 4 and the active site. We found that n-heptyl-ß-D-thioglucopyranoside detergent acts as an inhibitor for PSTG1. Thus, we propose that the recognition of hydrophobic aglycone moiety is important for PSTG1-catalyzed reactions. Domain 4 might be a potential target for elucidating the aglycone recognition mechanism of PSTG1 as well as for engineering PSTG1 to create a further excellent enzyme to degrade STG more efficiently to produce sesaminol.

Structural basis for the catalytic mechanism of the glycoside hydrolase family 3 isoprimeverose-producing oligoxyloglucan hydrolase from Aspergillus oryzae.

Aspergillus oryzae isoprimeverose-producing oligoxyloglucan hydrolase (IpeA) releases isoprimeverose units (α-d-xylopyranosyl-(1→6)-d-glucose) from the non-reducing end of xyloglucan oligosaccharides and belongs to glycoside hydrolase family 3. In this paper, we report the X-ray crystal structure of the IpeA complexed with a xyloglucan oligosaccharide, (XXXG: Glc4 Xyl3 ). Trp515 of IpeA plays a critical role in XXXG recognition at positive subsites. In addition, docking simulation of IpeA-XXXG suggested that two Tyr residues (Tyr268 and Tyr445) are involved in the catalytic reaction mechanism of IpeA. Tyr268 plays an important role in product turnover, whereas Tyr445 stabilizes the acid/base Glu524 residue, which serves as a proton donor. Our findings indicate that the substrate recognition machinery of IpeA is specifically adapted to xyloglucan oligosaccharides.

Redesigning N-glycosylation sites in a GH3 ß-xylosidase improves the enzymatic efficiency.

BACKGROUND: ß-Xylosidases are glycoside hydrolases (GHs) that cleave xylooligosaccharides and/or xylobiose into shorter oligosaccharides and xylose. Aspergillus nidulans is an established genetic model and good source of carbohydrate-active enzymes (CAZymes). Most fungal enzymes are N-glycosylated, which influences their secretion, stability, activity, signalization, and protease protection. A greater understanding of the N-glycosylation process would contribute to better address the current bottlenecks in obtaining high secretion yields of fungal proteins for industrial applications. RESULTS: In this study, BxlB-a highly secreted GH3 ß-xylosidase from A. nidulans, presenting high activity and several N-glycosylation sites-was selected for N-glycosylation engineering. Several glycomutants were designed to investigate the influence of N-glycans on BxlB secretion and function. The non-glycosylated mutant (BxlBnon-glyc) showed similar levels of enzyme secretion and activity compared to the wild-type (BxlBwt), while a partially glycosylated mutant (BxlBN1;5;7) exhibited increased activity. Additionally, there was no enzyme secretion in the mutant in which the N-glycosylation context was changed by the introduction of four new N-glycosylation sites (BxlBCC), despite the high transcript levels. BxlBwt, BxlBnon-glyc, and BxlBN1;5;7 formed similar secondary structures, though the mutants had lower melting temperatures compared to the wild type. Six additional glycomutants were designed based on BxlBN1;5;7, to better understand its increased activity. Among them, the two glycomutants which maintained only two N-glycosylation sites each (BxlBN1;5 and BxlBN5;7) showed improved catalytic efficiency, whereas the other four mutants' catalytic efficiencies were reduced. The N-glycosylation site N5 is important for improved BxlB catalytic efficiency, but needs to be complemented by N1 and/or N7. Molecular dynamics simulations of BxlBnon-glyc and BxlBN1;5 reveals that the mobility pattern of structural elements in the vicinity of the catalytic pocket changes upon N1 and N5 N-glycosylation sites, enhancing substrate binding properties which may underlie the observed differences in catalytic efficiency between BxlBnon-glyc and BxlBN1;5. CONCLUSIONS: This study demonstrates the influence of N-glycosylation on A. nidulans BxlB production and function, reinforcing that protein glycoengineering is a promising tool for enhancing thermal stability, secretion, and enzymatic activity. Our report may also support biotechnological applications for N-glycosylation modification of other CAZymes.

Cloning, purification, and characterization of GH3 ß-glucosidase, MtBgl85, from Microbulbifer thermotolerans DAU221.

BACKGROUND: ß-Glucosidases have attracted considerable attention due to their important roles in various biotechnological processes such as cellulose degradation to make energy and hydrolysis of isoflavone. Microbulbifer thermotolerans (M. thermotolerans) is isolated from deep-sea sediment and has not been researched much yet. As a potential candidate for a variety of biotechnological industries, ß-glucosidases from the novel bacterial species should be researched extensively. METHODS: ß-Glucosidase, MtBgl85, from M. thermotolerans DAU221 was purified by His-tag affinity chromatography and confirmed by SDS-PAGE and zymogram. Its biochemical and physiological properties, such as effects of temperature, pH, metal ions, and organic solvents, substrate specificity, and isoflavone hydrolysis, were investigated. RESULTS: M. thermotolerans DAU221 showed ß-glucosidase activity in a marine broth plate containing 0.1% esculin and 0.25% ammonium iron (III) citrate. The ß-glucosidase gene, mtbgl85, was isolated from the whole genome sequence of M. thermotolerans DAU221. The ß-glucosidase gene was 2,319 bp and encoded 772 amino acids. The deduced amino acid sequence had a 43% identity with OaBGL84 from Olleya aquimaris and 35% and 32% identity with to CfBgl3A and CfBgl3C from Cellulomonas fimi among bacterial glycosyl hydrolase family 3, respectively. The optimal temperature of MtBgl85 was 50 °C and the optimum pH was 7.0. MtBgl85 activity was strongly reduced in the presence of Hg2+ and Cu2+ ions. As a result of measuring the activity at various concentrations of NaCl, it was confirmed that the activity was maintained up to the concentration of 1 M, but gradually decreased with increasing concentration. MtBgl85 showed higher enzyme stability at non-polar solvents (high Log Pow ) than polar solvents (low Log Pow ). The hydrolyzed products of isoflavone glycosides and arbutin were analyzed by HPLC.

Structural and functional characterization of a glycoside hydrolase family 3 ß-N-acetylglucosaminidase from Paenibacillus sp. str. FPU-7.

Chitin, a ß-1,4-linked homopolysaccharide of N-acetyl-d-glucosamine (GlcNAc), is one of the most abundant biopolymers on Earth. Paenibacillus sp. str. FPU-7 produces several different chitinases and converts chitin into N,N'-diacetylchitobiose ((GlcNAc)2) in the culture medium. However, the mechanism by which the Paenibacillus species imports (GlcNAc)2 into the cytoplasm and divides it into the monomer GlcNAc remains unclear. The gene encoding Paenibacillus ß-N-acetyl-d-glucosaminidase (PsNagA) was identified in the Paenibacillus sp. str. FPU-7 genome using an expression cloning system. The deduced amino acid sequence of PsNagA suggests that the enzyme is a part of the glycoside hydrolase family 3 (GH3). Recombinant PsNagA was successfully overexpressed in Escherichia coli and purified to homogeneity. As assessed by gel permeation chromatography, the enzyme exists as a 57-kDa monomer. PsNagA specifically hydrolyses chitin oligosaccharides, (GlcNAc)2-4, 4-nitrophenyl N-acetyl ß-d-glucosamine (pNP-GlcNAc) and pNP-(GlcNAc)2-6, but has no detectable activity against 4-nitrophenyl ß-d-glucose, 4-nitrophenyl ß-d-galactosamine and colloidal chitin. In this study, we present a 1.9 Å crystal structure of PsNagA bound to GlcNAc. The crystal structure reveals structural features related to substrate recognition and the catalytic mechanism of PsNagA. This is the first study on the structural and functional characterization of a GH3 ß-N-acetyl-d-glucosaminidase from Paenibacillus sp.

Structural studies of a glycoside hydrolase family 3 ß-glucosidase from the model fungus Neurospora crassa.

The glycoside hydrolase family 3 (GH3) ß-glucosidases are a structurally diverse family of enzymes. Cel3A from Neurospora crassa (NcCel3A) belongs to a subfamily of key enzymes that are crucial for industrial biomass degradation. ß-Glucosidases hydrolyse the ß-1,4 bond at the nonreducing end of cellodextrins. The hydrolysis of cellobiose is of special importance as its accumulation inhibits other cellulases acting on crystalline cellulose. Here, the crystal structure of the biologically relevant dimeric form of NcCel3A is reported. The structure has been refined to 2.25 Šresolution, with an Rcryst and Rfree of 0.18 and 0.22, respectively. NcCel3A is an extensively N-glycosylated glycoprotein that shares 46% sequence identity with Hypocrea jecorina Cel3A, the structure of which has recently been published, and 61% sequence identity with the thermophilic ß-glucosidase from Rasamsonia emersonii. NcCel3A is a three-domain protein with a number of extended loops that deepen the active-site cleft of the enzyme. These structures characterize this subfamily of GH3 ß-glucosidases and account for the high cellobiose specificity of this subfamily.

Cloning and characterization of two novel ß-glucosidase genes encoding isoenzymes of the cellobiase complex from Cellulomonas biazotea.

Enzymatic degradation of cellulosic waste to generate renewable biofuels has offered an attractive solution to the energy problem. Synergistic hydrolysis of cellulose residues requires the participation of three different types of cellulases - endoglucanases, exoglucanases, and ß-glucosidases (Bgl). Our group has been interested in using Bgl of Cellulomonas biazotea in studies designed to investigate cooperative action among different cellulases. We previously have cloned bgl genes encoding Cba and Cba3, which are C. biazotea Bgl isozymes representing two different Bgl families, respectively; specifically, Glycoside Hydrolase Family 3 (GH3) and Glycoside Hydrolase Family 1 (GH1). To gain an understanding of the complexity of Bgl in C. biazotea, we analyzed E. coli clones containing plasmids into which C. biazotea DNA had been inserted; these clones could hydrolyze 4-methylumbelliferyl ß-d-glucopyranoside (MUG) supplemented in solid agar media, suggesting they might contain bgl genes. Through restriction analysis and DNA sequencing, two novel bgl genes, designated cba4 and cba5 and encoding Cba4 (484 amino acids) and Cba5 (758 amino acids) were identified. Cba4 and Cba5 appear to be members of GH1 and GH3, respectively. Both Cba4 and Cba5 were concluded to be genuine cellobiases as each was found to enable their E. coli hosts to survive on media in which cellobiose was the sole carbon source. Despite lacking a typical secretory signal sequence, Cba4 and Cba5 are secretory proteins. Although they are isoenzymes, Cba, Cba3, Cba4, and Cba5 were shown to possess distinct substrate specificities. These four Bgl members may play important roles in hydrolyzing a wide variety of ß-glucosides including cellobiose and non-cellulosic substrates.