Step-by-step desolvation enables high-rate and ultra-stable sodium storage in hard carbon anodes.

Hard carbon is regarded as the most promising anode material for sodium-ion (Na-ion) batteries, owing to its advantages of high abundance, low cost, and low operating potential. However, the rate capability and cycle life span of hard carbon anodes are far from satisfactory, severely hindering its industrial applications. Here, we demonstrate that the desolvation process defines the Na-ion diffusion kinetics and the formation of a solid electrolyte interface (SEI). The 3A zeolite molecular sieve film on the hard carbon is proposed to develop a step-by-step desolvation pathway that effectively reduces the high activation energy of the direct desolvation process. Moreover, step-by-step desolvation yields a thin and inorganic-dominated SEI with a lower activation energy for Na+ transport. As a result, it contributes to greatly improved power density and cycling stability for both ester and ether electrolytes. When the above insights are applied, the hard carbon anode achieves the longest life span and minimum capacity fading rate at all evaluated current densities. Moreover, with the increase in current densities, an improved plateau capacity ratio is observed. This step-by-step desolvation strategy comprehensively enhances various properties of hard carbon anodes, which provides the possibility of building practical Na-ion batteries with high power density, high energy density, and durability.

Unlocking the Na-Storage Behavior in Hard Carbon Anode by Mass Spectrometry.

Hard carbon (HC) is a promising anode candidate for Na-ion batteries (NIBs) because of its excellent Na-storage performance, abundance, and low cost. However, a precise understanding of its Na-storage behavior remains elusive. Herein, based on the D2O/H2SO4-based TMS results collected on charged/discharged state HC electrodes, detailed Na-storage mechanisms (the Na-storage states and active sites in different voltage regions), specific SEI dynamic evolution process (formation, rupture, regeneration and loss), and irreversible capacity contribution (dead Na0, NaH, etc.) were elucidated. Moreover, by employing the online electrochemical mass spectrometry (OEMS) to monitor the gassing behavior of HC-Na half-cell during the overdischarging process, a surprising rehydrogen evolution reaction (re-HER) process at around 0.02 V vs Na+/Na was identified, indicating the occurrence of Na-plating above 0 V vs Na+/Na. Additionally, the typical fluorine ethylene carbonate (FEC) additive was demonstrated to reduce the accumulation of dead Na0 and inhibit the re-HER process triggered by plated Na.

Pre-Oxidation Strategy Transforming Waste Foam to Hard Carbon Anodes for Boosting Sodium Storage Performance.

Large reserves, high capacity, and low cost are the core competitiveness of disordered carbon materials as excellent anode materials for sodium-ion batteries (SIBs). And the existence and improper treatment of a large number of organic solid wastes will aggravate the burden on the environment, therefore, it is significant to transform wastes into carbon-based materials for sustainable energy utilization. Herein, a kind of hard carbon materials are reported with waste biomass-foam as the precursor, which can improve the sodium storage performance through pre-oxidation strategy. The introduction of oxygen-containing groups can promote structural cross-linking, and inhibit the melting and rearrangement of carbon structure during high-temperature carbonization that produces a disordered structure with a suitable degree of graphitization. Moreover, the micropore structure are also regulated during the high-temperature carbonization process, which is conducive to the storage of sodium ions in the low-voltage plateau region. The optimized sample as an electrode material exhibits excellent reversible specific capacity (308.0 mAh g-1) and initial Coulombic efficiency (ICE, 90.1%). In addition, a full cell with the waste foam-derived hard carbon anode and a Na3V2(PO4)3 cathode is constructed with high ICE and energy density. This work provides an effective strategy to conversion the waste to high-value hard carbon anode for sodium-ion batteries.

Extended Plateau Capacity of Hard Carbon Anode for High Energy Lithium-Ion Batteries.

Hard carbon materials have shown promising potential for sodium-ion storage due to accommodating larger sodium ions. However, as for lithium-ion storage, the challenge lies in tuning the high lithiation plateau capacities, which impacts the overall energy density. Here, hard carbon microspheres (HCM) are prepared by tailoring the cross-linked polysaccharide, establishing a comprehensive methodology to obtain high-performance lithium-ion batteries (LIBs) with long plateau capacities. The "adsorption-intercalation mechanism" for lithium storage is revealed combining in situ Raman characterization and ex situ nuclear magnetic resonance spectroscopy. The optimized HCM possesses reduced defect content, enriched graphitic microcrystalline, and low specific surface area, which is beneficial for fast lithium storage. Therefore, HCM demonstrates a high reversible capacity of 537 mAh g-1 with a significant low-voltage plateau capacity ratio of 55%, high initial Coulombic efficiency, and outstanding rate performance (152 mAh g-1 at 10 A g-1). Moreover, the full cell (HCM||LiCoO2) delivers outstanding fast-charging capability (4 min charge to 80% at 10 C) and impressive energy density of 393 Wh kg-1. Additionally, 80% reversible capacity can be delivered under -40 °C with competitive cycling stability. This work provides in-depth insights into the rational design of hard carbon structures with extended low-voltage plateau capacity for high energy LIBs.

Exploring Carbonization Temperature to Create Closed Pores for Hard Carbon as High-Performance Sodium-Ion Battery Anodes.

Biomass-derived porous carbon materials are meaningful to employ as a hard carbon precursor for anode materials of sodium-ion batteries (SIBs) from a sustainability perspective. Here, a straightforward approach is proposed to develop rich closed pores in pinenut-derived carbon, with the aim of improving Na+ plateau storage by adjusting the pyrolysis temperature. The optimized sample, namely the pinenut-derived carbon at 1300 °C, demonstrates remarkable reversible specific capacity of 278 mAh g-1, along with a high initial Coulomb efficiency of 85% and robust cycling stability (with a capacity retention of 89% after 800 cycles at 0.2 A g-1). In situ and ex situ analyses unveil that the developed closed pores play a significant role in enhancing the plateau capacity, providing compelling evidence for the "adsorption-filling" mechanism. Moreover, the corresponding full-cell achieves a high energy density of 245.7 Wh kg-1 (based on the total weight of both electrode active materials) and exhibits outstanding rate capability (191.4 mAh g-1 at 3 A g-1).

Molecular Engineering to Regulate the Pseudo-Graphitic Structure of Hard Carbon for Superior Sodium Energy Storage.

Resin-derived hard carbons have shown great advantages in serving as promising anode materials for sodium-ion batteries due to their flexible microstructure tunability. However, it remains a daunting challenge to rationally regulate the pseudo-graphitic crystallite and defect of hard carbon toward advanced sodium storage performance. Herein, a molecular engineering strategy is demonstrated to modulate the cross-linking degree of phenolic resin and thus optimize the microstructure of hard carbon. Remarkably, the resorcinol endows resin with a moderate cross-linking degree, which can finely tune the pseudo-graphitic structure with enlarged interlayer spacing and restricted surface defects. As a consequence, the optimal hard carbon delivers a notable reversible capacity of 334.3 mAh g-1 at 0.02 A g-1, a high initial Coulombic efficiency of 82.1%, superior rate performance of 103.7 mAh g-1 at 2 A g-1, and excellent cycling durability over 5000 cycles. Furthermore, kinetic analysis and in situ Raman spectroscopy are performed to reveal the electrochemical advantage and sodium storage mechanism. This study fundamentally sheds light on the molecular design of resin-based hard carbons to advance sodium energy for scale-up applications.

A Sodium Bis(fluorosulfonyl)imide (NaFSI)-based Multifunctional Electrolyte Stabilizes the Performance of NaNi1/3Fe1/3Mn1/3O2/hard Carbon Sodium-ion Batteries.

A sodium bis(fluorosulfonyl)imide (NaFSI)-based multifunctional electrolyte is developed by partially replacing NaPF6 salt in the electrolyte to improve the wide temperature range working capability of NaNi1/3Fe1/3Mn1/3O2/hard carbon (NNFM111/HC) sodium-ion batteries (SIBs). The capacity retention of the SIBs with NaFSI-NaPF6 dual salt electrolyte increases from 47.2 % to 75.5 % after 250 cycles at 25 °C, and from 51.0 % to 82.3 % after 80 cycles at 45 °C, and the 1 C discharge capacity retention at the low temperature of -20 °C also increases 26.8 %. In the single salt system, NaPF6 effectively passivate the aluminum foil and NaFSI passivate the electrode/electrolyte interface. The synergistic effect of NaPF6 and NaFSI greatly improves the battery performance in a wide temperature range. This NaFSI-based dual salt electrolyte also effectively overcomes the flaws when the SIBs using NaFSI or NaPF6 independently, and makes it more suitable for SIBs, indicating promising prospects in the commercial application of NNFM111/HC SIBs.

Improved Interface Construction on Anode and Cathode for Na-Ion Batteries Using Ultralow-Concentration Electrolyte Containing Dual-Additives.

Compared with Li+, Na+ with a smaller stokes radius has faster de-solvation kinetics. An electrolyte with ultralow sodium salt (0.3 M NaPF6) is used to reduce the cell cost. However, the organic-dominated interface, mainly derived from decomposed solvents (SSIP solvation structure), is defective for the long cycling performance of sodium ion batteries. In this work, the simple application of dual additives, including sodium difluoro(oxalato)borate (NaDFOB) and tris(trimethylsilyl)borate (TMSB), is demonstrated to improve the cycling performance of the hard carbon/NaNi1/3Fe1/3Mn1/3O2 cell by constructing interface films on the anode and cathode. A significant improvement on cycling stability has been achieved by incorporating dual additives of NaDFOB and TMSB. Particularly, the capacity retention increased from 17 % (baseline) to 79 % (w/w, 2.0 wt % NaDFOB) and 83 % (w/w, 2.0 wt % NaDFOB and 1.0 wt % TMSB) after 200 cycles at room temperature. Insight into the mechanism of improved interfacial properties between electrodes and electrolyte in ultralow concentration electrolyte has been investigated through a combination of theoretical computation and experimental techniques.

Carbons Derived from Regenerated Spherical Cellulose as Anodes for Li-Ion Batteries at Elevated Temperatures.

Biomass-based materials have emerged as a promising alternative to the conventional graphite anode in Li-ion batteries due to their renewability, low cost, and environmental friendliness. Therefore, a facile synthesis method for porous hard carbons based on cellulose acetate microspheres and bead cellulose is used, and their application as anode materials in Li-ion batteries is discussed. The resulting porous carbons exhibit promising electrochemical characteristics, including a reversible capacity of about 300 mAh g-1 at 0.1 C (37 mA g-1) after 50 cycles, and stable capacities up to 210 mAh g-1 over 1000 cycles at 1 C (372 mA g-1) in half-cells for cellulose acetate microspheres carbonised at 1200 °C. Moreover, at 60 °C cellulose-derived carbons show higher specific capacities than graphite (300 mAh g-1 vs 240 mAh g-1 at 1 C after 500 cycles), indicating their potential for use in high-temperature applications. The different charge storage mechanisms of the prepared hard carbon materials and graphite are observed. While capacity of graphite is mainly controlled by the Faradaic redox process, the cellulose-derived carbons combine Faradaic intercalation and capacitive charge adsorption.

Injecting Excess Na into a P2-Type Layered Oxide Cathode to Achieve Presodiation in a Na-Ion Full Cell.

The initial Na loss limits the theoretical specific capacity of cathodes in Na-ion full cell applications, especially for Na-deficient P2-type cathodes. In this study, we propose a presodiation strategy for cathodes to compensate for the initial Na loss in Na-ion full cells, resulting in a higher specific capacity and a higher energy density. By employing an electrochemical presodiation approach, we inject 0.32 excess active Na into P2-type Na0.67Li0.1Fe0.37Mn0.53O2 (NLFMO), aiming to compensate for the initial Na loss in hard carbon (HC) and the inherent Na deficiency of NLFMO. The structure of the NLFMO cathode converts from P2 to P'2 upon active Na injection, without affecting subsequent cycles. As a result, the HC||NLFMOpreNa full cell exhibits a specific capacity of 125 mAh/g, surpassing the value of 61 mAh/g of the HC||NLFMO full cell without presodiation due to the injected active Na. Moreover, the presodiation effect can be achieved through other engineering approaches (e.g., Na-metal contact), suggesting the scalability of this methodology.

Molecular Engineering Enabling High Initial Coulombic Efficiency and Rubost Solid Electrolyte Interphase for Hard Carbon in Sodium-Ion Batteries.

Hard carbon (HC) as a potential candidate anode for sodium-ion batteries (SIBs) suffers from unstable solid electrolyte interphase (SEI) and low initial Coulombic efficiency (ICE), which limits its commercial applications and urgently requires the emergence of a new strategy. Herein, an organic molecule with two sodium ions, disodium phthalate (DP), was successfully engineered on the HC surface (DP-HC) to replenish the sodium loss from solid electrolyte interphase (SEI) formation. A stabilized and ultrathin (≈7.4 nm) SEI was constructed on the DP-HC surface, which proved to be simultaneously suitable in both ester and ether electrolytes. Compared to pure HC (60.8 %), the as-designed DP-HC exhibited a high ICE of >96.3 % in NaPF6 in diglyme (G2) electrolyte, and is capable of servicing consistently for >1600 cycles at 0.5 A g-1 . The Na3 V2 (PO4 )3 (NVP)|DP-HC full-cell with a 98.3 % exceptional ICE can be cycled stably for 450 cycles, demonstrating the tremendous practical application potential of DP-HC. This work provides a molecular design strategy to improve the ICE of HC, which will inspire more researchers to concentrate on the commercialization progress of HC.

Steric Hindrance Engineering to Modulate the Closed Pores Formation of Polymer-Derived Hard Carbon for High-Performance Sodium-Ion Batteries.

The closed pores play a critical role in improving the sodium storage capacity of hard carbon (HC) anode, however, their formation mechanism as well as the efficient modulation strategy at molecular level in the polymer-derived HCs is still lacking. In this work, the steric hindrance effect has been proposed to create closed pores in the polymer-derived HCs for the first time through grafting the aromatic rings within and between the main chains in the precursor. The experimental data and theoretical calculation demonstrate that steric-hindrance effect from the aromatic ring side group can increase backbone rigidity and the internal free volumes in the polymer precursor, which can prevent the over graphitization and facilitate the formation of closed pores during the carbonization process. As a result, the as-prepared HC anode exhibits a remarkably enhanced discharge capacity of 340.3 mAh/g at 0.1 C, improved rate performance (210.7 mAh/g at 5 C) as well as boosted cycling stability (86.4% over 1000 cycles at 2C). This work provides a new insight into the formation mechanisms of closed pores via steric hindrance engineering, which can shed light on the development of high-performance polymer-derived HC anode for sodium-ion batteries.

Industrial-Scale Hard Carbon Designed to Regulate Electrochemical Polarization for Fast Sodium Storage.

Given the merits of abundant resource, low cost and high electrochemical activity, hard carbons have been regarded as one of the most commercializable anode material for sodium-ion batteries (SIBs). However, poor rate capability is one of the main obstacles that severely hinder its further development. In addition, the relationships between preparation method, material structure and electrochemical performance have not been clearly elaborated. Herein, a simple but effective strategy is proposed to accurately construct the multiple structural features in hard carbon via adjusting the components of precursors. Through detailed physical characterization of the hard carbons derived from different regulation steps, and further combined with in-situ Raman and galvanostatic intermittent titration technique (GITT) analysis, the network of multiple relationships between preparation method, microstructure, sodium storage behavior and electrochemical performance have been successfully established. Simultaneously, exceptional rate capability about 108.8 mAh g-1 at 8 A g-1 have been achieved from RHC sample with high reversible capacity and desirable initial Coulombic efficiency (ICE). Additionally, the practical applications can be extended to cylindrical battery with excellent cycle behaviors. Such facile approach can provide guidance for large-scale production of high-performance hard carbons and provides the possibility of building practical SIBs with high energy density and durability.

Regulating Ion-Dipole Interactions in Weakly Solvating Electrolyte towards Ultra-Low Temperature Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) are recognized as promising energy storage devices. However, they suffer from rapid capacity decay at ultra-low temperatures due to high Na+ desolvation energy barrier and unstable solid electrolyte interphase (SEI). Herein, a weakly solvating electrolyte (WSE) with decreased ion-dipole interactions is designed for stable sodium storage in hard carbon (HC) anode at ultra-low temperatures. 2-methyltetrahydrofuran with low solvating power is incorporated into tetrahydrofuran to regulate the interactions between Na+ and solvents. The reduced Na+-dipole interactions facilitate more anionic coordination in the first solvation sheath, which consistently maintains anion-enhanced solvation structures from room to low temperatures to promote inorganic-rich SEI formation. These enable WSE with a low freezing point of -83.3 °C and faster Na+ desolvation kinetics. The HC anode thus affords reversible capacities of 243.2 and 205.4 mAh g-1 at 50 mA g-1 at -40 and -60 °C, respectively, and the full cell of HC||Na3V2(PO4)3 yields an extended lifespan over 250 cycles with high capacity retention of ~100 % at -40 °C. This work sheds new lights on the ion-dipole regulation for ultra-low temperature SIBs.

Enhancing the Initial Coulombic Efficiency of Sodium-Ion Batteries via Highly Active Na2 S as Presodiation Additive.

Recently, sodium-ion batteries (SIBs) have received considerable attention for large-scale energy storage applications. However, the low initial Coulombic efficiency of traditional SIBs severely impedes their further development. Here, a highly active Na2 S-based composite is employed as a self-sacrificial additive for sodium compensation in SIBs. The in situ synthesized Na2 S is wrapped in a carbon matrix with nanoscale particle size and good electrical conductivity, which helps it to achieve a significantly enhanced electrochemical activity as compare to commercial Na2 S. As a highly efficient presodiation additive, the proposed Na2 S/C composite can reach an initial charge capacity of 407 mAh g-1 . When 10 wt.% Na2 S/C additive is dispersed in the Na3 V2 (PO4 )3 cathode, and combined with a hard carbon anode, the full cell achieves 24.3% higher first discharge capacity, which corresponds to a 18.3% increase in the energy density from 117.2 to 138.6 Wh kg-1 . Meanwhile, it is found that the Na2 S additive does not generate additional gas during the initial charging process, and under an appropriate content, its reaction product has no adverse impact on the cycling stability and rate performance of SIBs. Overall, this work establishes Na2 S as a highly effective additive for the construction of advanced high-energy-density SIBs.

Liquid Template Assisted Activation for "Egg Puff"-Like Hard Carbon toward High Sodium Storage Performance.

The slow solid diffusion dynamics of sodium ions and the side-reaction of sodium metal plating at low potential in the hard carbon anode of sodium ion batteries (SIBs) pose significant challenges to the safety manipulation of high-rate batteries. Herein, a simple yet powerful fabricating method is reported on for "egg puff"-like hard carbon with few N doping using rosin as a precursor via liquid salt template-assisted and potassium hydroxide dual activation. The as-synthesized hard carbon delivers promising electrochemical properties in the ether-based electrolyte especially at high rates, based on the absorption mechanism of fast charge transfer. The optimized hard carbon exhibits a high specific capacity of 367 mAh g-1 at 0.05 A g-1 and 92.9% initial coulombic efficiency (ICE), 183 mAh g-1 at 10 A g-1 , and ultra-long cycle stability of reversible discharge capacity of 151 mAh g-1 after 12,000 cycles at 5 A g-1 with the average coulombic efficiency of ≈99% and the decay of 0.0026% per cycle. These studies will undoubtedly provide an effective and practical strategy for advanced hard carbon anode of SIBs based on adsorption mechanism.

Regulating the Wettability of Hard Carbon through Open Mesochannels for Enhanced K+ Storage.

Hard carbons are deemed as promising anode materials for high-performance potassium-ion battery, but their commercialization is still hindered by the insufficient K+ transfer kinetics and poor potassiophilicity. Herein, these issues are addressed by improving the wettability of hard carbon, which can be achieved by the introduction of open mesochannels. A series of such hollow mesoporous carbon capsules with different dimensions are synthesized, which exhibit markedly enhanced wettability with electrolyte compared to the microporous counterparts. Various characterizations confirm its effects on promoting the kinetics and potassiophilicity of as-synthesized carbons, which can be additionally improved by S-doping. As a result, the 2D mesoporous carbon anode exhibits excellent rate capability (122.2 mAh g-1 at 4 A g-1 ), high reversible capacity (396.6 mAh g-1 at 0.1 A g-1 after 200 cycles), and outstanding cycling stability (197.0 mAh g-1 at 2 A g-1 after 1400 cycles). In addition, the hollow mesoporous architecture can effectively buffer the volume expansion and thus stabilize the carbon anodes, as visualized by in situ transmission electron microscopy. This work provides new insight for enhanced K+ storage performance from the perspective of anode wettability with electrolyte, as well as a universal anode design that combines mesochannels architecture with heteroatom doping.

Edge Coordination of Ni Single Atoms on Hard Carbon Promotes the Potassium Storage and Reversibility.

Hard carbon is the most promising anode for potassium-ion batteries (PIBs) due to its low cost and abundance, but its limited storage capacity remains a major challenge. Herein, edge coordination of metal single atoms is proved to be an effective strategy for promoting potassium storage in hard carbon for the first time, taking B, N co-doped hard carbon nanotubes anchored by edge Ni-N4 -B atomic sites (Ni@BNHC) as an example. It is revealed that edge Ni-N4 -B can provide active sites for interlayer adsorption of K+ and that Ni atoms can facilitate the reversibility of K+ storage on N and B atoms. Furthermore, an unprecedentedly reversible K+ storage capacity of 694 mAh g-1 at 0.05 A g-1 is realized by introducing commercial carbon nanotubes. This work provides a new perspective for the application of single-atom engineering and the design of high-performance carbon anodes for PIBs.

Amine-Aldehyde Condensation-Derived N-Doped Hard Carbon Microspheres for High-Capacity and Robust Sodium Storage.

Hard carbon is generally accepted as the choice of anode material for sodium-ion batteries. However, integrating high capacity, high initial Coulombic efficiency (ICE), and good durability in hard carbon materials remains challenging. Herein, N-doped hard carbon microspheres (NHCMs) with abundant Na+ adsorption sites and tunable interlayer distance are constructed based on the amine-aldehyde condensation reaction using m-phenylenediamine and formaldehyde as the precursors. The optimized NHCM-1400 with a considerable N content (4.64%) demonstrates a high ICE (87%), high reversible capacity with ideal durability (399 mAh g-1 at 30 mA g-1 and 98.5% retention over 120 cycles), and decent rate capability (297 mAh g-1 at 2000 mA g-1 ). In situ characterizations elucidate the adsorption-intercalation-filling sodium storage mechanism of NHCMs. Theoretical calculation reveals that the N-doping decreases the Na+ adsorption energy on hard carbon.

Novel Structural Design and Adsorption/Insertion Coordinating Quasi-Metallic Na Storage Mechanism toward High-performance Hard Carbon Anode Derived from Carboxymethyl Cellulose.

Hard Carbon have become the most promising anode candidates for sodium-ion batteries, but the poor rate performance and cycle life remain key issues. In this work, N-doped hard carbon with abundant defects and expanded interlayer spacing is constructed by using carboxymethyl cellulose sodium as precursor with the assistance of graphitic carbon nitride. The formation of N-doped nanosheet structure is realized by the CN• or CC• radicals generated through the conversion of nitrile intermediates in the pyrolysis process. This greatly enhances the rate capability (192.8 mAh g-1 at 5.0 A g-1 ) and ultra-long cycle stability (233.3 mAh g-1 after 2000 cycles at 0.5 A g-1 ). In situ Raman spectroscopy, ex situ X-ray diffraction and X-ray photoelectron spectroscopy analysis in combination with comprehensive electrochemical characterizations, reveal that the interlayer insertion coordinated quasi-metallic sodium storage in the low potential plateau region and adsorption storage in the high potential sloping region. The first-principles density functional theory calculations further demonstrate strong coordination effect on nitrogen defect sites to capture sodium, especially with pyrrolic N, uncovering the formation mechanism of quasi-metallic bond in the sodium storage. This work provides new insights into the sodium storage mechanism of high-performance carbonaceous materials, and offers new opportunities for better design of hard carbon anode.