Determination of the urinary concentrations of six bisphenols in public servants by online solid-phase extraction-liquid chromatography tandem mass spectrometry.

Bisphenols are widely used as monomers and additives in plastic production. Thus, bisphenol A (BPA) and its most prominent substitutes have been detected in many environmental and human samples. This study proposes an online solid-phase extraction analytical methodology coupled to liquid chromatography with tandem mass spectrometry for the determination of six bisphenols (BPA and bisphenols F (BPF), S (BPS), AF (BPAF), B (BPB), and E (BPE)) in urine samples as an efficient and automated methodology. The method was developed and validated for all bisphenols with good recoveries (92-112%) and repeatability (RSD ≤ 10%) despite the variable matrix effects, except BPAF (which would require a dedicated internal standard), achieving method quantification limits in the 0.05-2.2 ng mL-1 range. The methodology was subsequently applied to 435 urine samples from a non-occupational exposure population (civil servants for the regional government) from Santiago de Compostela (Galicia, Spain). Only BPA, BPF, and BPS were positively detected; the last two presented higher detection frequencies than BPA. When the urinary concentrations are extrapolated to human intake and compared to the European Food Safety Agency (EFSA) tolerable daily intake (TDI) of 2 × 10-4 µg kg-1 day-1 (TDI), all BPA positively identified samples would surpass this threshold. Although no TDI exists currently for the other two identified bisphenols, it is evident that human exposure to bisphenols should be limited. Finally, the results stratification by gender revealed higher levels of exposure to BPF in the women group.

A WHO-led global strategy to control greenhouse gas emissions: a call for action.

BACKGROUND: Climate change, driven by anthropogenic greenhouse gas emissions, is among the greatest threats to human health. The World Health Organisation (WHO), has led global efforts to respond to emerging public health threats including the control of hazardous substances such as tobacco, alcohol, lead and asbestos, with remarkable health gains. BODY: Despite WHO's clear messaging on the enormous and growing health risks of climate change, greenhouse gases are not yet classified as hazardous substances, requiring control through a global strategy or framework. Additionally, WHO has not classified disease attributable to climate change as a result of the promulgation of these hazards as a Public Health Emergency of International Concern (PHEIC), despite the serious and preventable health risks it poses globally. Several historical precedents set the stage for WHO to declare excess greenhouse gases as health hazards, including the control of ozone-depleting substances and breast-milk substitutes where the public benefit of control exceeded the potential benefit of their promulgation. In addition, WHO's undertaking within the International Health Regulations to protect global health, providing imperative to declare climate change a PHEIC, with Tedros Adhanom Ghebreyesus, director-general of WHO, declaring: "The climate crisis is a health crisis, fuelling outbreaks, contributing to higher rates of noncommunicable diseases, and threatening to overwhelm our health workforce and health infrastructure". Importantly, the health sector, perhaps more than other sectors, has successfully overcome formidable, vested interests in combatting these threats to health. CONCLUSION: It is thus imperative that WHO make full use of their credibility and influence to establish a global framework for the control of greenhouse gases through the declaration of excess greenhouse gas emissions as a hazardous substance, and declaring climate change a PHEIC. Who else is better placed to drive the considerable societal transformation needed to secure a liveable future?

Do hazardous substances in demolition waste hinder circular economy?

Hazardous substances in demolition waste are often deemed a barrier to a circular economy owing to concerns about their fate in recycled materials. However, with the growing demand for recycling materials, it is essential to find circular solutions for construction materials but still protect health and the environment by managing hazardous substances. In this study, selected hazardous substance groups were analysed from demolition waste samples. Most of the concentrations did not raise any concerns when the safety of recycling materials was considered. However, the detection limits of laboratory chemical analysis can be discussed, as bromine was found in samples by an X-ray fluorescence (XRF)-analyser, but only one laboratory detected brominated flame retardants (BRFs). New technologies and practices are needed to follow the chemical content of materials used in the construction phase. Detecting hazardous substances in recyclable materials is the only way to achieve harmless material cycles.

Levels and control of welding fume exposure to total particulate, hexavalent chromium, and manganese in contracted activities in an oil refinery setting (2008-2018).

In response to increasing focus on occupational exposures to welding fume, a 10-year series of personal exposure measurements was analyzed for the two main welding processes (Shielded Metal Arc Welding or Stick and Tungsten Inert Gas welding or TIG) used in an oil refinery setting. Exposures from ancillary gouging and grinding were also analyzed. The operations were conducted under a permit-to-work system, which stipulated control measures in the form of ventilation and respiratory protective equipment (RPE) depending on the work environment, base metal, and welding process. The analysis focused on three health hazards of interest: total particulate (TP); hexavalent chromium (Cr (VI)); and manganese (Mn). The study's aims were the analysis of exposure levels related to operational conditions to verify the adequacy of required control measures and the generation of quantitative information for the development of predictive exposure models. Arithmetic mean exposures were 2.01 mg/m3 for TP (n = 94), 13.86 µg/m3 for Cr (VI) (n = 160), and 0.024 mg/m3 for Mn (n = 95). Requirements and practices for ventilation and use of RPE appeared adequate for maintaining exposure levels below maximum use concentrations. Predictive models for mean exposure levels were developed using multiple linear regression. Different patterns emerged for TP, Cr (VI), and Mn exposure determinants. Enclosed or confined work environments were associated with elevated exposure levels, regardless of the provision of local exhaust or general dilution ventilation. Carbon arc, used with gouging and grinding, contributed significantly to TP exposure (p = 0.006). The relative TP source strengths of the two main welding processes were comparable to the literature data. For Cr (VI), stick welding was associated with approximately 50-fold (p < 0.001) higher exposure potential than TIG welding. For Mn, this difference was approximately 2.5-fold. Differences were observed across the three analytes in exposure reduction efficiency of local exhaust ventilation (LEV) compared to natural ventilation, possibly due to ineffective use in confined spaces. These findings contribute to the overall understanding of TP, Cr (VI), and Mn exposures from welding and required controls in an oil refinery setting.

Umnutzung von Gewerbegebäuden in Wohnraum: Was ist bezüglich möglicher Schadstoffbelastungen in der Innenraumluft zu beachten?

The conversion of industrial buildings into residential space requires special consideration of the inherited building fabric and associated pollutants. Due to the previous industrial use at contaminated sites, certain pollutants may play a significant role that are normally not the focus of refurbishments activities of residential spaces. In order to comply with the increased requirements with respect to indoor air quality in residential spaces, and to avoid unnecessary efforts and costs of amendments to the refurbishment, the Indoor Air Hygiene Commission (IRK) provides advice on how to prepare the conversion of commercial buildings so that healthy living conditions are ensured.

[Research on quantitative evaluation of revise requirements of Specifications of Air Sampling for Hazardous Substances Monitoring in the Workplace (GBZ 159-2004)].

Objective: To conduct quantitative evaluation on the revise requirements of Specifications of Air Sampling for Hazardous Substances Monitoring in the Workplace (GBZ 159-2004) , clarify the problems and suggestions during its implementation for improvement, and provide a basis for the revision of the standard. Methods: From April to September 2021, stratified convenient sampling method was adopted and semi-open questionnaire was used to investigate the occupational health personnel in CDC, occupational prevention and control institutes, employers, third-party technical service institutions and universitie. The entropy weight of each index and the score based on entropy weight of GBZ 159 were calculated. Spearman rank correlation analysis was used to describe the correlation between the two indexes and radar chart was drawn for comprehensive evaluation. Results: A total of 151 questionnaires were received from the respondents, of which 147 were valid, with an effective recovery rate of 97.35%, involving 29 provinces, autonomous regions and municipalities. The median G scores of the necessity and urgency of GBZ 159 revision based on entropy weight were 2.84 and 3.17, respectively, and the difference was statistically significant (M=-25.50, P<0.001) . The trend of the score G of necessity and urgency based on entropy weight was basically the same for all secondary items (r(s)=0.9998, P<0.001) , and the score G of urgency based on entropy weight was higher than that of necessity. The highest score G of necessity and urgency based on entropy weight was "3.13 long time sampling", which were 7.56 and 8.23 respectively. This was followed by "3.12 short time sampling", which were 7.19 and 7.13 respectively. Conclusion: GBZ 159 has encountered some new problems and challenges in the implementation process, and some of its technical indicators have been out of line with the actual practice of occupational health at present. These are the two items that urgently needs to be revised and improved, such as "3.13 long time sampling" and "3.12 short time sampling" and other items need to be revised and improved.

Research progress in the detection of common foodborne hazardous substances based on functional nucleic acids biosensors.

With the further improvement of food safety requirements, the development of fast, highly sensitive, and portable methods for the determination of foodborne hazardous substances has become a new trend in the food industry. In recent years, biosensors and platforms based on functional nucleic acids, along with a range of signal amplification devices and methods, have been established to enable rapid and sensitive determination of specific substances in samples, opening up a new avenue of analysis and detection. In this paper, functional nucleic acid types including aptamers, deoxyribozymes, and G-quadruplexes which are commonly used in the detection of food source pollutants are introduced. Signal amplification elements include quantum dots, noble metal nanoparticles, magnetic nanoparticles, DNA walkers, and DNA logic gates. Signal amplification technologies including nucleic acid isothermal amplification, hybridization chain reaction, catalytic hairpin assembly, biological barcodes, and microfluidic system are combined with functional nucleic acids sensors and applied to the detection of many foodborne hazardous substances, such as foodborne pathogens, mycotoxins, residual antibiotics, residual pesticides, industrial pollutants, heavy metals, and allergens. Finally, the potential opportunities and broad prospects of functional nucleic acids biosensors in the field of food analysis are discussed.

Thermal co-treatment of aluminum dross and municipal solid waste incineration fly ash: Mineral transformation, crusting prevention, detoxification, and low-carbon cementitious material preparation.

Harmless disposal and resource utilization of hazardous industrial wastes has become an important issue with the green development of human society. However, resource utilization of hazardous solid wastes, such as the production of cementitious materials, is usually accompanied by a pretreatment process to remove adverse impurities that contaminate the final product. In this study, aluminum dross (AD) was thermally co-treated with another hazardous waste, municipal solid incineration fly ash (MSWI-FA), to synergistically solidify F and Na, control leaching of heavy metals, and remove chloride impurities. Significant crusting was observed when AD was thermally treated by itself, but not when AD and MSWI-FA were thermally co-treated. In the process of co-thermal treatment, the remaining Cl, Na, and K contents were reduced to as low as 0.3%, 1.8%, and 0.6%, respectively. CaO and SiO2 in MSWI-FA reacted with Na3AlF6 and Al2O3 in AD, and formed CaF2 and Na6(AlSiO4)6, which contributed to the prevention of crusting and limited the leaching concentrations of F and Na to below detection thresholds and 270.6 mg/L, respectively. In addition, heavy metals were well solidified, and dioxins were fully decomposed during thermal treatment. Finally, a sulfoaluminate cementitious material (SACM) with high early- and later-age strengths was successfully created via synergetic complementarity using thermally co-treated AD and MSWI-FA together with other solid wastes. Collectively, this study outlines a promising method for the efficient and sustainable utilization of AD and MSWI-FA.

Causal factors of work-related chemical eye injuries reported to the Dutch Poisons Information Center.

This study investigated the circumstances of chemical occupational eye exposures reported to the Dutch Poisons Information Center. During a 1-year prospective study, data were collected through a telephone survey of 132 victims of acute occupational eye exposure. Victims were often exposed to industrial products (35%) or cleaning products (27%). Most patients developed no or mild symptoms. Organizational factors (such as lack of work instructions (52%)), and personal factors (such as time pressure and fatigue (50%), and not adequately using personal protective equipment (PPE, 14%), were the main causes of occupational eye exposures. Exposure often occurred during cleaning activities (34%) and personal factors were reported more often during cleaning (67%) than during other work activities (41%). Data from Poison Control Centers are a valuable source of information, enabling the identification of risk factors for chemical occupational eye exposure. This study shows that personal factors like time pressure and fatigue play a significant role, although personal factors may be related to organizational issues such as poor communication. Therefore, risk mitigation strategies should focus on technical, organizational, and personal factors. The need to follow work instructions and proper use of PPE should also have a prominent place in the education and training of workers.

Utilization of plant extracts to control the safety and quality of fried foods-A review.

Frying is one of the most common methods of preparing foods. However, it may lead to the formation of potentially hazardous substances, such as acrylamide, heterocyclic amines, trans fatty acids, advanced glycation end products, hydroxymethyl furfural and polycyclic aromatic hydrocarbons, and adversely alter the desirable sensory attributes of foods, thereby reducing the safety and quality of fried foods. Currently, the formation of toxic substances is usually reduced by pretreatment of the raw materials, optimization of process parameters, and the use of coatings. However, many of these strategies are not highly effective at inhibiting the formation of these undesirable reaction products. Plant extracts can be used for this purpose because of their abundance, safety, and beneficial functional attributes. In this article, we focus on the potential of using plant extracts to inhibit the formation of hazardous substances, so as to improve the safety of fried food. In addition, we also summarized the effects of plant extracts, which inhibit the production of hazardous substances, on food sensory aspects (flavor, color, texture, and taste). Finally, we highlight areas where further research is required.

[Research progress of occupational hazards in plywood manufacturing].

Occupational disease hazards in plywood manufacturing mainly include wood dust, formaldehyde, phenol, ammonia, noise, terpene, microorganisms, etc. The exposure is complex with multiple factors accompanied or coexisted. In the production process, these factors are exceeded, and mass occupational disease hazard events occurred among workers. Exposure to wood dust, formaldehyde, terpene, etc., put workers at increased risk of cancer. This article provides a review of this issue in order to provide a scientific basis for the prevention and control of occupational disease hazards in plywood manufacturing.

[Health risk assessment associated with priority potentially hazardous chemical compounds detected in canned meat and meat-and-vegetable food for infants].

Assessment of public health safety associated with chemical contaminants consumed with food is an important component for solving the tasks of ensuring the sanitary and epidemiological well-being of the population. For these purposes, it is necessary to establish priority potentially dangerous compounds among the identified undeclared and unintended chemical contaminants for further consumers risk assessment. In conditions of unacceptable levels of health risk, it is necessary to decide whether it is advisable to develop new or change existing hygiene standards for these substances. The aim of the study was to assess the health risk associated with priority potentially dangerous unintended chemical components of contamination in canned meat and meat-and-vegetable products for infants (using the example of N-nitrosoamines). Material and methods. The selection of priority chemical compounds and public health risk assessment were carried out in accordance with the procedure for identifying undeclared and potentially dangerous unintended chemicals in food and using modified approaches based on the results of previous studies. Health risk assessment for infants consuming canned meat and meat-and-vegetables containing priority chemicals was carried out in accordance with the methodology approved by the Eurasian Economic Commitee, as well as using the Guidelines for assessing risks to public health when exposed to environmental pollutants. To characterize the calculated risk levels, the classification proposed in the draft document «Guidelines for assessing risks to public health when exposed to environmental pollutants¼ was used. Results. N-nitrosoamines are classified as chemical contaminants that are a priority for public health risk assessment, identified on the basis of the potential hazard category. A comparative health risk assessment for the target group consumers of canned meat and meat-and-vegetables sold on the territory of the Russian Federation and the Socialistic Republic of Vietnam showed the presence of an unacceptable risk to the health of the Russian population in relation to non-carcinogenic adverse health effects associated with the intake of N-nitrosodimethylamine (NDMA) (hazard quotient HQ=1.1) and N-nitrosodibuthylamine (HQ=5.25). Many experimental (animal) researches confirm the formation of negative effects and potential harm to humans, formed by the consumption of N-nitrosoamines with food. At the same time, the level of the exposure of N-nitrosoamines during oral administration was assessed mainly from the side of carcinogenic effects, however, this study reflects the hazard, including from non-carcinogenic risks associated not only with NDMA and N-nitrosodiethylamine, for which there is a hygienic standard, but also for other N-nitrosoamines, for which there is no hygienic regulation. In turn, the European Food Safety Agency's (EFSA) study notes that it is necessary to conduct a risk assessment for human health in relation to other N-nitrosoamines identified in food, and, if necessary, rationing of these compounds, which is also confirmed by this study. Conclusion. The conducted health risk assessment of the target population of Russia (infants from 6 months to 3 years) consuming the studied types of products containing N-nitrosoamines showed the presence of unacceptable levels of non-carcinogenic health risks in relation to the development processes and impaired liver function. In connection with the identified risks to the health of the target population, it is advisable to establish maximum permissible levels not only for the amount of NDMA and N-nitrosodiethylamine, but also for other N-nitrozoamines identified by the results of the study, with their subsequent regulation.

Enhancing Scientific Support for the Stockholm Convention's Implementation: An Analysis of Policy Needs for Scientific Evidence.

The Stockholm Convention is key to addressing the global threats of persistent organic pollutants (POPs) to humanity and the environment. It has been successful in identifying new POPs, but its national implementation remains challenging, particularly by low- and middle-income Parties. Concerted action is needed to assist Parties in implementing the Convention's obligations. This analysis aims to identify and recommend research and scientific support needed for timely implementation of the Convention. We aim this analysis at scientists and experts from a variety of natural and social sciences and from all sectors (academia, civil society, industry, and government institutions), as well as research funding agencies. Further, we provide practical guidance to scientists and experts to promote the visibility and accessibility of their work for the Convention's implementation, followed by recommendations for sustaining scientific support to the Convention. This study is the first of a series on analyzing policy needs for scientific evidence under global governance on chemicals and waste.

Determination of volatile organic compounds (VOCs) levels from various smoking cessation aids by using gas chromatography-mass spectrometry methodology.

An analytical method was validated and developed to determine the levels of volatile organic compounds (VOCs) including 1,3-butadiene, isoprene, acrylonitrile, benzene, toluene, and styrene from smoking cessation aids using by gas chromatography-mass spectrometry (GC-MS). Seventeen non-ignitable cigarette type of smoking cessation aids, liquid-phase of smoking cessation aids, gas-phase of smoking cessation aids, and ignitable cigarette type of smoking cessation aids were analyzed for levels of six VOCs. The proposed method for six VOCs was validated in satisfactory linearity (R2 > 0.99), recovery (80.38-119.14%). limit of detection (LOD) (0.05-0.19 µg/ml), limit of quantification (LOQ) (0.07-0.18 µg/ml), accuracy (80.47-117.28%), and precision (0.15-7.22%). The mean concentrations of six VOCs were generated in 1,3-butadiene (6.18 µg/cigarette), isoprene (0.34 µg/cigarette), acrylonitrile (0.003 µg/cigarette), benzene (ND = not detected, the lower limit of detection), toluene (0.27 µg/cigarette), styrene (0.13 µg/cigarette). Results showed low levels of VOCs from smoking cessation aid except from liquid-phase of smoking cessation aids. These results are necessary to investigate unintentional hazardous substances generated from smoking cessation aids, and develop accurate analytical method in order to obtain scientific basis for safety management.

Significant variations of dangerous exposures during COVID-19 pandemic in Italy: a possible association with the containment measures implemented to reduce the virus transmission.

BACKGROUND: In response to the COVID-19 health emergency, mass media widely spread guidelines to stop the virus transmission, leading to an excessive and unaware use of detergents and disinfectants. In Italy and in other countries this tendency caused a significant increase of exposures to these products in 2020. Evaluating data collected by the Italian Pavia Poison Centre (PPC), this study intends to examine the relationship between the COVID-19 lockdown and the variations of exposures to specific product categories possibly associated to the containment measures implemented. Simultaneously, this work shows the effectiveness of the European Product Categorisation System (EuPCS) in surveillance activities of dangerous chemicals. METHODS: Exposure cases managed by the PPC during March-May 2020 (lockdown) and during the same months of 2017-2018-2019 were compared. Differences in categorical variables were tested with the Chi-square test. The level of significance was set at Alpha = .05. The study included all EuPCS groups but specifically focused on cleaners, detergents, biocides and cosmetics. RESULTS: During the lockdown, calls from private citizens showed a highly significant increase (+ 11.5%, p < .001) and occupational exposures decreased (- 11.7%, p = .011). Among Cleaners, exposures to Bleaches slightly increased while Drain cleaning products went through a significant reduction (- 13.9%, p = .035). A highly significant increase of exposures to Disinfectants was observed (+ 7.7%, p = .007), particularly to those for surfaces (+ 6.8%, p = .039). Regarding Cosmetics, both handwashing soaps and gel products significantly increased (respectively: + 25.0, p = .016 and + 9.7%, p = .028). Among children 1-5 years, the statistical significance is reached with exposures to Dishwashing detergents (+ 13.1%, p = .032), handwashing soaps (+ 28.6%, p = .014) and handwashing gel products (+ 16.8%, p = .010). Contrarily, Liquid Laundry Detergent Capsules decreased in a highly significant manner (- 25%; p = .001). The general severity of exposures showed a highly significant decrease (Moderate: - 10.1%, p = .0002). CONCLUSIONS: This study investigated the relationship between the COVID-19 lockdown and the variations of exposures to some product categories related to the containment measures. The results obtained support any action to be taken by Competent Authorities to implement measures for a safer use of cleaners/disinfectants. This paper shows the benefit in applying the EuPCS to categorize products according to their intended use, though an extension of this system to products not covered by CLP Regulation may be a further advantage.

Treatability of hazardous substances in industrial wastewater: case studies for textile manufacturing and leather production sectors.

Hazardous substances used and produced by different industrial activities pose a potential risk to the environment and to human health. Different physicochemical and/or biological processes are used in industrial wastewater treatment; these methods, however, may not be effective in removing these substances. This study was carried out to comparatively evaluate the removal of hazardous substances through conventional wastewater treatment processes that are used by major industries in Turkey. A four-season monitoring study was carried out in textile manufacturing and leather production sectors, representing industrial activities in Turkey. Samples were analyzed for 45 priority substances defined by the European Union and 250 specific pollutants listed in the Turkish Regulation on Surface Water Quality. For both wastewaters, where biological treatment was performed after pretreatment, their characteristics showed that organics were almost completely removed. except for dichloromethane (44-51% removals) and dioxin and dioxin-like compounds (64-69% removals). Additionally, different removal ratios (16-97%) were obtained for metals; the poorer removal was observed for B, Ba, Ag, Sb, and Si. The remaining metals (Cu, Pb, Sb, V, Si for textile; Cr, Cu, Sb, Si for leather effluents) in the treated wastewaters were still higher than environmental quality standards (EQS) of receiving water bodies. The study revealed that existing treatment processes were not adequate for efficient hazardous substance removal and there is an urgent need to improve them. Finally, advanced treatment technologies were suggested for specific pollutants together with their unit treatment costs.

[Risk communication for protection against hazardous substances in the workplace]. / Risikokommunikation zum Schutz vor Gefahrstoffen am Arbeitsplatz.

Hazardous substances are ubiquitous in the world of work. Employees from all sectors are exposed to different risks when working with hazardous substances. This also applies to people who do not directly handle hazardous substances (bystanders). Risk communication in occupational safety and health takes place at different levels. The spectrum ranges from large to small companies, safety experts, company physicians, works and staff council representatives to employees and the general public. Risk communication in occupational safety and health along the supply chain aims to create risk awareness among manufacturers, employers and employees to reduce risky behaviour and to encourage risk-reducing behaviour.Instruments of risk communication are explained in this article and considered with regard to their effectiveness. This affects binding instruments in the European internal market such as the hazard label or the safety data sheet (SDS). At the level of the Hazardous Substances Ordinance, they are the Technical Rules for Hazardous Substances (TRGS), limit values, the Easy-to-use Workplace Control Scheme for Hazardous Substances (EMKG) and, as a creative instrument, objects of the "DASA Working World Exhibition" in Dortmund, Germany. The results of the paper show that an adaptation of the instruments is necessary, especially for small and micro-enterprises, in order to find the appropriate entry point into risk assessment. Often, the existing instruments are not known, too extensive or difficult to understand. Recommendations for action are necessary that make it easy to get started with risk assessment. Existing scientific studies tend to focus on the deficits in risk assessment rather than on the development of efficient ways to communicate risks. Further analyses of the needs of the different target groups are necessary for appropriate risk communication.

The National Institute of Health and the Italian Poison Centers Network: results of a collaborative study for the surveillance of exposures to chemicals.

Background: The Public Health Surveillance Systems are essential to improve and protect public health, as highlighted by the World Health Organization. According with this consideration, a systematic collaboration between the National Institute of Health and the Poison Centers of Northern, Central and Southern Italy was established. Its aim was to improve the national network for the surveillance of dangerous exposures to chemicals. The developed network provided harmonized data essential for evidence-based interventions and significantly ameliorated the data flow between the Poison Centers and the Central Health Institutions. Methods: The improvement of the system was obtained through several actions, such as the development of the "Online Surveillance Card" for the detection of sentinel events in real time and the harmonization of the data collection flow, including the product categorization according to the European Product Categorization System. Data analysis was carried out by Microsoft's IBM SPSS Statistics version 26, Access and Excel. Results: Important information was obtained, regarding also exposures to chemicals and their management in pediatric populations. The surveillance network was proved effective not only under "normal" conditions but also to promptly monitor changes during exceptional health emergencies, such as the COVID-19 pandemic. During the 2020 lockdown the surveillance system registered a significant increase in the frequency of exposures to disinfectants (p-value=0.002), an evidence that highlighted the need of tailored intervention. Conclusions: This Italian Project model proves to be reliable and suitable to be transferred to other European countries, in order to realize an European Poison Centers' Network, able to overcome unsolved health problems and to globally improve the "evidence-based" prevention of exposures to chemicals.

Non-targeted screening workflows for gas chromatography-high-resolution mass spectrometry analysis and identification of biomagnifying contaminants in biota samples.

The health of key species in the Baltic region has been impaired by exposure to anthropogenic hazardous substances (AHSs), which accumulate in organisms and are transferred through food chains. There is, thus, a need for comprehensive characterization of the occurrence and accumulation of AHSs in the ecosystem. In this study, we use a non-target screening (NTS) approach for this purpose. A major challenge in NTS of biological samples is the removal of matrix components such as lipids that may interfere with the detection and identification of compounds of interest. Here, we combine gel permeation chromatography with Florisil® column fractionation to achieve sufficient lipid removal for gas chromatography-high-resolution mass spectrometry analysis using electron ionization (EI) and electron capture negative ion chemical ionization (ECNI). In addition, we present new data processing workflows designed to systematically find and identify frequently occurring and biomagnifying AHSs, including known, emerging, and new contaminants. Using these workflows, we discovered a wide range of contaminants in tissue samples from blue mussels, fish, and marine mammals, and calculated their biomagnification factors (BMFs). Compounds with BMFs above 1 for herring and at least one marine mammal included legacy chlorinated pollutants (polychlorinated biphenyls, DDTs, chloro-benzenes/cyclohexanes, chlordanes, toxaphenes, dieldrin), polybrominated diphenyl ethers (PBDEs), and brominated biphenyls. However, there were also several halogenated natural products (halogenated methoxylated brominated diphenyl ethers, 1'-methyl-1,2'-bipyrroles, 1,1'-dimethyl-2,2'-bipyrroles, and the halogenated monoterpene mixed halogenated compound 1) as well as the novel flame retardant Dechlorane 602 and several polycyclic aromatic hydrocarbons, terpenoids, and steroids. The legacy pollutants exhibited the expected biomagnification behavior, demonstrating the utility of the unguided data processing workflow. Graphical abstract.

Analytical survey of tattoo inks-A chemical and legal perspective with focus on sensitizing substances.

BACKGROUND: Tattoo inks have been reported to elicit allergic contact dermatitis. OBJECTIVES: To investigate the labels and the contents of metals and pigments in tattoo inks, considering restrictions within the European Union. METHODS: Seventy-three tattoo inks currently available on the market, either bought or donated (already used), were investigated for trace metals and pigments by inductively coupled plasma mass spectrometry and by matrix-assisted laser desorption/ionization time of flight tandem mass spectrometry. RESULTS: Ninety-three percent of the bought tattoo inks violated European, legal requirements on labeling. Fifty percent of the tattoo inks declared at least one pigment ingredient incorrectly. Sixty-one percent of the inks contained pigments of concern, especially red inks. Iron, aluminium, titanium, and copper (most in green/blue inks) were the main metals detected in the inks. The level of metal impurities exceeded current restriction limits in only a few cases. Total chromium (0.35-139 µg/g) and nickel (0.1-41 µg/g) were found in almost all samples. The levels of iron, chromium, manganese, cobalt, nickel, zinc, lead, and arsenic were found to covary significantly. CONCLUSIONS: To prevent contact allergy and toxic reactions among users it is important for tattoo ink manufacturers to follow the regulations and decrease nickel and chromium impurities.