Management of impacted fetal head at cesarean delivery.

Globally, more than 1 in 5 women give birth by cesarean delivery, and at least 5% of these births are at full cervical dilatation. In these circumstances, and when labor has been prolonged in the first stage of labor, the fetal head can become low and wedged deep in the woman's pelvis, making it difficult to deliver the baby. This emergency is known as impacted fetal head. These are technically challenging births associated with serious risks to both the woman and the baby. The difficulty in disimpacting the fetal head increases maternal risks of hemorrhage and injury to adjacent organs and may have long-term consequences for future pregnancies. In addition, there can be associated neonatal consequences, such as skull fractures, brain hemorrhage, hypoxic brain injury, and, rarely, perinatal death. Globally, maternity staff are increasingly encountering this emergency, with studies in the United Kingdom suggesting that impacted fetal head may complicate as many as 1 in 10 emergency cesarean deliveries. Moreover, there has been a sharp increase in reports of perinatal brain injuries associated with impaction of the fetal head at cesarean delivery. When an impacted fetal head occurs, the maternity team can employ a range of approaches to help deliver the fetal head, including an assistant (another obstetrician or midwife) pushing the head up from the vagina, delivering the baby feet first (reverse breech extraction), administering tocolysis to relax the uterus, and using a balloon cephalic elevation device (Fetal Pillow) to elevate the baby's head. However, there is currently no consensus on how best to manage these births, resulting in a lack of confidence among maternity staff, variable practice, and potentially avoidable harm in some circumstances. This article examined the evidence for the prevention and management of this critical obstetrical emergency and outlined recommendations for best practices and training.

Incarcerated Gravid Uterus: A New Treatment Using the Transvaginal Ultrasound Probe and Narrative Literature Review.

BACKGROUND: 'Incarcerated gravid uterus' is a morbid complication that occurs in 1 in 3000 pregnancies. It is characterized by failure of a retropositioned uterus to become an abdominal organ between 12-14 weeks of gestation. If maternal symptoms develop or gestational age surpasses 14-16 weeks, replacement of a retropositioned uterus is recommended to reduce adverse outcomes. Previously described techniques for management include passive reduction, digital replacement, or more invasive methods such as laparoscopy, laparotomy, or sigmoidoscopy. These methods are either minimally effective, painful, or risky. OBJECTIVE: The objective of this report is to describe our clinical experience with a new minimally-invasive technique that uses the transvaginal ultrasound probe for uterine replacement in cases of incarceration, to conduct a narrative literature review on 'incarcerated gravid uterus,' and to propose an algorithm for management of this condition. STUDY DESIGN: This is a case series of eight patients with an incarcerated gravid uterus who were managed with the transvaginal ultrasound probe technique at one academic medical institution between March 2020 and July 2023, as well as a narrative review of the literature on 'incarcerated gravid uterus.' PubMed, Google Scholar, and Ovid MEDLINE databases were searched for the terms "incarcerated gravid uterus," "uterine incarceration," "uterine sacculation," and "retroverted uterus" up to April 2024. RESULTS: The transvaginal ultrasound probe technique resulted in successful uterine replacement, with resolution of symptoms, in all eight patients. All pregnancies resulted in live births with good neonatal outcomes-seven out of eight patients delivered at term, and one delivered in the late preterm period. CONCLUSION: Our proposed technique for treatment of an incarcerated gravid uterus with the transvaginal ultrasound probe is simple, minimally-invasive and effective. Based on our experience and the narrative literature review, an algorithm for the management of an incarcerated gravid uterus is proposed.

The use of bubble charts in analyzing second stage cesarean delivery rates.

BACKGROUND: The incidence of second stage cesarean delivery has been rising globally because of the failure or the anticipated difficulty of performing instrumental delivery. Yet, the best way to interpret the figure and its optimal rate remain to be determined. This is because it is strongly influenced by the practice of other 2 modes of birth, namely cesarean delivery performed before reaching the second stage and assisted vaginal birth during the second stage. In this regard, a bubble chart that can display 3-dimensional data through its x-axis, y-axis, and the size of each plot (presented as a bubble) may be a suitable method to evaluate the relationship between the rates of these 3 modes of births. OBJECTIVE: This study aimed to conduct an epidemiologic study on the incidence of second stage cesarean deliveries rates among >300,000 singleton term births in 10 years from 8 obstetrical units and to compare their second stage cesarean delivery rates in relation to their pre-second stage cesarean delivery rates and assisted vaginal birth rates using a bubble chart. STUDY DESIGN: The territory-wide birth data collected between 2009 and 2018 from all 8 public obstetrical units (labelled as A to H) were reviewed. The inclusion criteria were all singleton pregnancies with cephalic presentation that were delivered at term (≥37 weeks' gestation). Pre-second stage cesarean delivery rate was defined as all elective cesarean deliveries and those emergency cesarean deliveries that occurred before full cervical dilatation was achieved as a proportion of the total number of births. The second stage cesarean delivery rate and assisted vaginal birth rate were calculated according to the respective mode of delivery as a proportion of the number of cases that reached full cervical dilatation. The rates of these 3 modes of births were compared among the parity groups and among the 8 units. Using a bubble chart, each unit's second stage cesarean delivery rate (y-axis) was plotted against its pre-second stage cesarean delivery rate (x-axis) as a bubble. Each unit's second stage cesarean delivery to assisted vaginal birth ratio was represented by the size of the bubble. RESULTS: During the study period, a total of 353,434 singleton cephalic presenting term pregnancies were delivered in the 8 units, and 180,496 (51.1%) were from nulliparous mothers. When compared with the multiparous group, the nulliparous group had a significantly lower pre-second stage cesarean delivery rate (18.58% vs 21.26%; P<.001) but a higher second stage cesarean delivery rate (0.79% vs 0.22%; P<.001) and a higher assisted vaginal birth rate (17.61% vs 3.58%; P<.001). Using the bubble of their averages as a reference point in the bubble chart, the 8 units' bubbles were clustered into 5 regions indicating their differences in practice: unit B and unit H were close to the average in the center. Unit A and unit F were at the upper right corner with a higher pre-second stage cesarean delivery rate and second stage cesarean delivery rate. Unit D and unit E were at the opposite end. Unit C was at the upper left corner with a low pre-second stage cesarean delivery rate but a high second stage cesarean delivery rate, whereas unit G was at the opposite end. Unit C and unit G were also in the extremes in terms of pre-second stage cesarean delivery to assisted vaginal birth ratio (0.09 and 0.01, respectively). Although some units seemed to have very similar second stage cesarean delivery rates, their obstetrical practices were differentiated by the bubble chart. CONCLUSION: The second stage cesarean delivery rate must be evaluated in the context of the rates of pre-second stage cesarean delivery and assisted vaginal birth. A bubble chart is a useful method for analyzing the relationship among these 3 variables to differentiate the obstetrical practice between different units.

Lifetime HIV testing among three samples of adults with histories of incarceration in Southern California.

ABSTRACTJustice-impacted persons may inconsistently access HIV testing. This cross-sectional secondary analysis investigates lifetime HIV testing prevalence among adults with prior histories of incarceration in Southern California, United States, participating in health-focused programming (n = 3 studies). Self-reported demographic and lifetime HIV testing data were collected between 2017-2023; descriptive analyses were conducted. Across the three samples, at least 74% of participants were male; Latino and African American individuals accounted for nearly two-thirds of participants. Lifetime HIV testing ranged from 72.8% to 84.2%. Males were significantly more likely than females to report never being tested in two samples and accounted for >95% of those never tested. No statistically significant differences in testing were observed by race/ethnicity. Single young adults (ages 18-26) were less likely than their partnered peers to report testing. HIV testing is critical for ensuring that individuals access prevention and treatment. HIV testing among justice-impacted adults in this study was higher than in the general population, potentially due to opt-out testing in correctional settings. Nevertheless, these findings underscore the importance of implementing targeted interventions to reduce structural (e.g., health insurance, access to self-testing kits) and social barriers (e.g., HIV stigma) to increase HIV testing among justice-impacted males and single young adults.

Maternal and neonatal morbidity associated with Fetal Pillow® use at full dilatation caesarean: A retrospective cohort.

OBJECTIVE: To investigate associations of the Fetal Pillow® with maternal and neonatal morbidity. DESIGN: Retrospective cohort. SETTING: Two tertiary maternity units, New Zealand. POPULATION OR SAMPLE: Full dilatation singleton, term, cephalic caesarean section, with three comparisons: at Unit A (1) before versus after introduction of the Fetal Pillow® (1 Jaunary 2016-31 October 2021); (2) with versus without the Fetal Pillow® after introduction (27 July 2017-31 October 2021); and (3) between Unit A and Unit B during the same time period (1 January 2019-31 October 2021). The Fetal Pillow® is unavailable at Unit B. METHODS: Cases were ascertained and clinical data were extracted from electronic clinical databases and records. Outcome data were adjusted and presented as adjusted odds ratios (aOR) with 95% CI. MAIN OUTCOME MEASURES: Primary outcome "any" uterine incision extension; secondary outcomes included major extension (into adjacent structures), and a composite neonatal outcome. RESULTS: In all, 1703 caesareans were included; 375 with the device and 1328 without. Uterine incision extension rates were: at Unit A before versus after introduction: 26.8% versus 24.8% (aOR 0.88, 95% CI 0.65-1.19); at Unit A with the Fetal Pillow® versus without: 26.1% versus 23.8% (aOR 1.14, 95% CI 0.83-1.57); and at Unit A versus Unit B: 24.2% versus 29.2% (aOR 0.73, 95% CI 0.54-0.99). No differences were found in major extensions, or neonatal composite outcome. CONCLUSIONS: Despite the relatively large size of this study, it could not rule out either a positive or a negative association between use of the Fetal Pillow® and uterine extensions, major uterine incision extensions, and neonatal morbidity. Randomised controlled trial evidence is required to assess efficacy.

Management of impacted fetal head at cesarean birth: A systematic review and meta-analysis.

INTRODUCTION: Despite increasing incidence of impacted fetal head at cesarean birth and associated injury, it is unclear which techniques are most effective for prevention and management. A high quality evidence review in accordance with international reporting standards is currently lacking. To address this gap, we aimed to identify, assess, and synthesize studies comparing techniques to prevent or manage impacted fetal head at cesarean birth prior to or at full cervical dilatation. MATERIAL AND METHODS: We searched MEDLINE, Emcare, Embase and Cochrane databases up to 1 January 2023 (PROSPERO: CRD420212750016). Included were randomized controlled trials (any size) and non-randomized comparative studies (n ≥ 30 in each arm) comparing techniques or adjunctive measures to prevent or manage impacted fetal head at cesarean birth. Following screening and data extraction, we assessed risk of bias for individual studies using RoB2 and ROBINS-I, and certainty of evidence using GRADE. We synthesized data using meta-analysis where appropriate, including sensitivity analyses excluding data published in potential predatory journals or at risk of retraction. RESULTS: We identified 24 eligible studies (11 randomized and 13 non-randomized) including 3558 women, that compared vaginal disimpaction, reverse breech extraction, the Patwardhan method and/or the Fetal Pillow®. GRADE certainty of evidence was low or very low for all 96 outcomes across seven reported comparisons. Pooled analysis mostly showed no or equivocal differences in outcomes across comparisons of techniques. Although some maternal outcomes suggested differences between techniques (eg risk ratio of 3.41 [95% CI: 2.50-4.66] for uterine incision extension with vaginal disimpaction vs. reverse breech extraction), these were based on unreliable pooled estimates given very low GRADE certainty and, in some cases, additional risk of bias introduced by data published in potential predatory journals or at risk of retraction. CONCLUSIONS: The current weaknesses in the evidence base mean that no firm recommendations can be made about the superiority of any one impacted fetal head technique over another, indicating that high quality training is needed across the range of techniques. Future studies to improve the evidence base are urgently required, using a standard definition of impacted fetal head, agreed maternal and neonatal outcome sets for impacted fetal head, and internationally recommended reporting standards.

Assessment of clinical validity of KPG index for 3D classification of impacted maxillary canines by cone beam computed tomography in patients.

OBJECTIVES: The primary objective of this study was to assess the validity of the KPG index in predicting the difficulty of treatment involving impacted maxillary canines. The secondary objective was to assess the reliability and reproducibility of the index. MATERIALS AND METHODS: A retrospective study was conducted on 96 maxillary impacted canines (MIC) in 60 patients aged 13-35 years. Cone-beam computed tomography (CBCT) scans were used to predict the treatment difficulty of MIC using the KPG index. Patient case files were assessed for the actual difficulty encountered in treating MIC. Cohen's kappa correlation coefficient was used for intra-observer reliability and Kendell's W test was used for inter-observer reliability. Spearman's correlation coefficient test was used to assess the correlation between predicted and actual treatment. RESULTS: Easy and moderately difficult cases exhibited a moderate correlation between actual and predicted treatment outcomes, whereas difficult cases displayed a weak correlation. The perfect correlation was observed exclusively in extremely difficult cases. The intra-observer reliability for assessing CBCT scans using the KPG guide was found to be 0.88, and the inter-rater reliability was 0.94. CONCLUSION: The KPG index displayed 87%, 71%, 50% and 100% validity in easy, moderately difficult, difficult, and extremely difficult cases, respectively. This index showed good reliability and reproducibility. However, it is imperative to consider a multitude of other factors, including the patient's age, presence of associated root resorption in adjacent teeth, and duration of treatment, to make an informed decision between surgical exposure and extraction.

Apical incisor root resorption due to ectopic maxillary canine eruption: Association with time of diagnosis and type of intervention in a retrospective population-based cohort study.

OBJECTIVES: The primary aim was to study upper incisor severe apical root resorption (RR) related to ectopic canine eruption and its association with timing of diagnosis and type of intervention conducted. The secondary aim was to correlate resorption with other dental anomalies. MATERIALS AND METHODS: Digital journals and radiographic material of all ectopic maxillary canines registered in 2012 in the regional public paediatric dental clinics in the Council of Aarhus were inspected retrospectively. Data related to 10 variables were retrieved. Post-treatment radiographs were used for evaluation of incisor RR. RESULTS: A total of 260 ectopic maxillary canines were diagnosed in 2012. The majority were found in the 9-13-year-old age group (0.8% prevalence within the total population). In all, 244 canines were assessed for eligibility and 181 had adequate final radiographs for evaluation of RR. Among ectopic maxillary canines, 9.4% caused severe incisor RR to neighbouring teeth. Timely palpation for canine eruption significantly reduced the odds for upper incisor resorption by 80%. Multiple regression showed that when the permanent canine cannot be palpated and the deciduous has been extracted, delaying the first X-rays was associated with a 38% odds ratio increase for RR for each year of delay after the age of 10 years. No significant associations were found between incisor RR and intervention conducted or other dental anomalies. CONCLUSION: Palpation of erupting maxillary canines is crucial for timely diagnosis of ectopic eruption and initiation of treatment to avoid RR. If the canine cannot be palpated at 10 years of age, radiographic examination is highly recommendable.

Mixed reality-based technology to visualize and facilitate treatment planning of impacted teeth: Proof of concept.

OBJECTIVE: We propose a method utilizing mixed reality (MR) goggles (HoloLens 2, Microsoft) to facilitate impacted canine alignment, as planning the traction direction and force delivery could benefit from 3D data visualization using mixed reality (MR). METHODS: Cone-beam CT scans featuring isometric resolution and low noise-to-signal ratio were semi-automatically segmented in Inobitec software. The exported 3D mesh (OBJ file) was then optimized for the HoloLens 2. Using the Unreal Engine environment, we developed an application for the HoloLens 2, implementing HoloLens SDK and UX Tools. Adjustable pointers were added for planning attachment placement, traction direction, and point of force application. The visualization was presented to participants of a course on impacted teeth treatment, followed by a 10-question survey addressing potential advantages (5-point scale: 1 = totally agree, 5 = totally disagree). RESULTS: Out of 38 respondents, 44.7% were orthodontists, 34.2% dentists, 15.8% dental students, and 5.3% dental technicians. Most respondents (44.7%) were between 35 and 44 years old, and only 1 (2.6%) respondent was 55-64 years old. Median answers for six questions were 'totally agree' (25th percentile 1, 75th percentile 2) and for four questions 'agree' (25th percentile 1, 75th percentile 2). No correlation was found between age, profession, and responses. CONCLUSION: Our method generated substantial interest among clinicians. The initial responses affirm the potential benefits, supporting the continued exploration of MR-based techniques for the treatment of impacted teeth. However, the recommendation for widespread use awaits validation through clinical trials.

How successful is the CatBoost classifier in diagnosing different dental anomalies in patients via sella turcica and vertebral morphologic alteration?

BACKGROUND: To investigate how successfully the classification of patients with and without dental anomalies was achieved through four experiments involving different dental anomalies. METHODS: Lateral cephalometric radiographs (LCRs) from 526 individuals aged between 14 and 22 years were included. Four experiments involving different dental anomalies were created. Experiment 1 included the total dental anomaly group and control group (CG). Experiment 2 only had dental agenesis and a CG. Experiment 3 consisted of only palatally impacted canines and the CG. Experiment 4 comprised patients with various dental defects (transposition, hypodontia, agenesis-palatally affected canine, peg-shaped laterally, hyperdontia) and the CG. Twelve sella measurements and assessments of the ponticulus posticus and posterior arch deficiency were given as input. The target was to distinguish between anomalies and controls. The CatBoost algorithm was applied to classify patients with and without dental anomalies. RESULTS: In order from lowest to highest, the predictive accuracies of the experiments were as follows: experiment 4 < experiment 2 < experiment 3 < experiment 1. The sella area (SA) (mm2) was the most important variable in experiment 1. The most significant variable in prediction model of experiment 2 was sella height posterior (SHP) (mm). Sella area (SA) (mm2) was again the most relevant variable in experiment 3. The most important variable in experiment 4 was sella height median (SHM) (mm). CONCLUSIONS: Every prediction model from the four experiments prioritized different variables. These findings may suggest that related research should focus on specific traits from a diagnostic perspective.

Feasibility study of a novel digital template-guided flapless extraction for maxillary palatal impacted teeth.

OBJECTIVE: With the increasing maturity of 3D printing technology, the application of digital guide template in the extraction of impacted teeth has become more sophisticated. However, for maxillary palatal deeply impacted teeth, there still exist significant clinical challenges. This experiment introduces a novel digital guide template and innovatively employs a flapless technique to explore a minimally invasive approach for the extraction of palatal deeply impacted teeth. METHODS: This experiment included 40 patients diagnosed with palatal completely impacted teeth, randomly divided into an experimental group and a control group. The experimental group used the new digital guide template for flapless extraction, while the control group employed the traditional freehand flap technique. RESULTS: The experimental group can significantly reduce the localization time of palatally impacted teeth (P < 0.001), with total surgery times of 18.15 ± 4.88 min and 22.00 ± 7.71 min for the experimental and control groups, respectively (P = 0.067). Although there were no significant statistical differences between the two groups in terms of intraoperative bleeding, adjacent tooth damage, infection, or damage to nearby important anatomical structures, the experimental group showed significant improvements in postoperative pain (P < 0.05), swelling (P < 0.001), and patient satisfaction (P < 0.001) compared to the control group. CONCLUSION: Compared to traditional freehand flap surgery, flapless extraction of palatally impacted teeth guided by digital templates significantly reduces the localization time of impacted teeth and demonstrates notable advantages in some postoperative complications. Future studies with larger sample sizes are needed to substantiate the feasibility of this technique.

The effect of optimum, indication-specific imaging fields on the radiation exposure from CBCT examinations of impacted maxillary canines and mandibular third molars.

OBJECTIVE: Indication-specific optimum field-of-views (FOVs) have been assessed for CBCT scans of impacted maxillary canines and mandibular third molars, as 40∅ × 35 mm and 35∅ × 35 mm, respectively. The objective was to investigate possible changes in absorbed organs and effective doses, for these two imaging indications, performing CBCT examinations with optimum FOV sizes instead of commonly used FOVs. Additionally, radiation exposure-induced cancer risk was calculated for both imaging indications with optimum FOVs. METHODS: An adult female head phantom (ATOM 702-D, CIRS, Norfolk, VA, USA) was scanned using Planmeca Viso G7 CBCT-device (Planmeca, Helsinki, Finland). Scanning factors, different FOV sizes, dose-area product (DAP) values and anatomical FOV locations were used for Monte Carlo PCXMC-simulation and ImpactMC software. In the PCXMC- simulation, 10-year-old child and 30-year-old adult phantoms were used to estimating effective and absorbed organ doses. RESULTS: The effective dose varied from 58 µSv to 284 µSv for impacted maxillary canines, and from 38 µSv to 122 µSv for mandibular third molars, the lowest dose value for each corresponding to optimum FOV. Effective dose reduction between the optimum FOV and the smallest common FOV of 50∅ × 50 mm, maintaining other scanning factors constant, was 33% for impacted maxillary canines, and 45% for mandibular third molars. At all examinations, the highest absorbed organ doses were in salivary glands or in oral mucosa. CONCLUSIONS: Optimum FOVs, 40∅ × 35 mm for impacted maxillary canine and 35∅ × 35 mm for mandibular third molar, could decrease effective doses received by young patients, and improve radiation safety in these common CBCT imaging procedures.

A mechanical and three-dimensional finite element study of the optimum tooth sectioning depth during the extraction of low-level horizontally impacted mandibular third molar.

The present study aims to determine the optimum sectioning depth for the extraction of low-level horizontally impacted mandibular third molar (LHIM3M) using mechanical and finite element analysis. One hundred and fifty extracted mandibular third molars were randomly divided into three groups: 1, 2 or 3 mm of tooth tissue was retained at the bottom of the crown. The breaking force of teeth was tested in a universal strength testing machine. The fracture surface was observed and the type of tooth breakage was recorded. According to the three groups, corresponding 3D finite element models were created. The breaking force obtained in the mechanical study was, respectively, applied and the stress and strain of the teeth and surrounding tissues were analysed. Breaking force decreased as sectioning depth increased. The 2 mm group produced the lowest rate of incomplete breakage (10%). In the 2 mm model, the stresses were evenly distributed in the tooth tissue at the bottom of the fissure, and the maximal stress was located in the tissue close to the root segment. The maximum values of stresses in the bone and of strains in the periodontal ligament of the second molar and bone were lower in the 1 mm model than in other models. Their distribution was similar in the three models. A sectioning depth of 1 mm group saves labour during the extraction of LHIM3M, compared to 2 and 3 mm; 2 mm might be the appropriate sectioning depth in terms of breakage shapes.

A retrospective analysis of the patient journey for children with an unerupted maxillary central incisor.

BACKGROUND: Maxillary central incisors (MCI) are the third most impacted teeth. Timely multidisciplinary management is indicated as unerupted incisors can cause functional- and appearance-related distress. AIM: To assess the patient journey for children with unerupted MCI, including referral, clinical assessment, surgical management and follow-up treatment, and highlight areas for improvement, as well as identify factors impacting orthodontic treatment burden (OTB). DESIGN: A retrospective service evaluation of children aged 6-16 years who had surgical management of unerupted MCI under general anaesthetic (GA) between 2018 and 2021. RESULTS: Fifty-two children with 62 unerupted MCI were identified. Mean age at referral was 8.8 years. Most children (82.7%) had supernumerary teeth in the anterior maxilla. Mean time between listing for GA and surgery increased from 4.3 to 15.2 months following the COVID-19 lockdown. Mean age at surgery was 10.4 years. Supernumerary removal and incisor exposure and bond was the most common treatment (56.6%). Most patients required hospital orthodontic treatment post-surgery (65.4%). CONCLUSION: Most children referred were below 9 years (60.1%); these children had reduced OTB compared to those who had been referred at an older age. Stage of root development was also a significant predictor in OTB. An unexpected finding was that conical supernumeraries were found to prevent MCI eruption.

Evaluation of complications and quality of life of patient after surgical extraction of mandibular impacted third molar teeth.

BACKGROUND: The aim of our study is to evaluate the postoperative complications after the extraction of impacted third molar teeth and to investigate the effects of these complications on the quality of life of patients. METHODS: Demographic, clinical, and radiological evaluations were conducted, covering factors like age, gender, and tooth position. Clinical measurements, pain and edema assessments, and quality of life evaluations through OHIP-14 scores were performed. Preoperative and postoperative mouth opening, trismus, alveolitis and dehiscence were evaluated. RESULTS: A total of 100 patients were included in our study. No significant gender-based differences were found in measurements, pain, or swelling. There was no statistically significant difference between the preoperative and postoperative results of difference A-C, difference B-E, difference A-D, and difference mouth opening. Procedure duration correlated positively with age, alveolar osteitis, trismus, and swelling. Postoperative quality of life, assessed by OHIP-14, demonstrated a negative correlation with age and trismus. It was observed that the gender and the tooth positions of the patients had no effect on the severity of postoperative pain and edema. CONCLUSIONS: As the age of the patients increases and the duration of the procedure increases, the rate of postoperative complications increases and it is concluded that the quality of life decreases significantly.

Effect of force direction and impaction angulation during dilaceration impacted central incisor traction: a finite element analysis.

BACKGROUND: The effects of traction forces at different angles on impacted central incisors(ICI)with varying inverted angles (IA) may be different. The objective of this study was to analyze the biomechanical effects of different force directions (FD) on developmentally inverted ICI with multi-angle variations and to offer insights and guidance for the treatment of inverted ICI. METHODS: Three-dimensional finite element method was employed to simulate clinical scenarios of inverted ICI traction. As such, 0.2 N of force (direction: antero-superior angles of 90°, 100°, 110°, 120°, and 130° relative to the long axis of the inverted ICI crown) was applied to the inverted ICI with inverse angles (IA) of 40°, 30°, 20°, 10° and 0°. Inverted ICI apical displacement and Von Mises stress on periodontal ligament (PDL) and alveolar bone were compared. RESULTS: IA and FD showed minimal influence on the stress distribution in the PDL, as higher stresses were concentrated in the apical region. The higher stresses in the alveolar bone are focused on the cervical and apical regions of the tooth. In particular, IA exerts a more significant impact on stress distribution in the alveolar bone than FD. The influence of IA on the apical displacement of inverted ICI is larger than that of FD. CONCLUSIONS: To promote the health of the root and periodontal tissues, it is recommended to use an angle of 100°-110° relative to the long axis of the ICI crown when dealing with a large IA (> 20°) developmentally inverted ICI. Conversely, an angle of 110°-120° can be used.

Long-term follow-up after the treatment of impacted canines in the maxilla causing severe root resorption of the lateral incisors: two case reports.

BACKGROUND: Root resorption of adjacent teeth due to impacted canines is common, and orthodontic treatment often leads to secondary resorption or even loss of adjacent roots. Clinical reports of long-term stability after treatment are rare. CASE PRESENTATION: This study reports two cases of maxillary impacted canines resulting in severe root resorption of the adjacent lateral incisors. Surgical exposure, orthodontic retraction, and alignment of the impacted canines were successful in both cases, and the resorbed lateral incisors were stable with no significant loosening and normal pulp vitality after treatment and at the 5- and 10-year follow-up appointments. CONCLUSIONS: Light orthodontic force may be used to move adjacent teeth with root resorption due to tooth obstruction. The path and direction in which the teeth are moved must be specifically designed so that the adjacent roots are not resorbed and so long-term stability can be achieved.

Comparison of perineural and systemic dexamethasone use in impacted third molar surgeries in terms of anesthesia duration and postoperative complaints: a controlled, randomized observational study.

BACKGROUND: Surgical extraction of impacted third molars (ITM) often leads to postoperative discomfort including pain, swelling, and limited function. Steroids like dexamethasone (DXN) are commonly used in oral surgery to manage pain and inflammation. Various administration routes for DXN exist, including intravenous (IV), perineural (PN), and oral applications, each with its advantages. Previous studies have shown that adding DXN to local anesthetics can prolong anesthesia duration and reduce postoperative sequelae. However, comparative studies on IV and PN applications with inferior alveolar nerve block (IANB) of DXN in ITM surgeries are limited. METHODS: This controlled, randomized observational study involved patients undergoing Class II position B ITM extraction. Patients were divided into three groups. IANB (1.8 ml of articaine hydrochloride + 1 ml of saline) was performed 1 h after IV-DXN (4 mg/ml DXN) was administered to the IV group. DXN along with IANB (1.8 ml of articaine hydrochloride + 1 ml of 4 mg/ml DXN) was applied to the PN group. Only IANB (1.8 ml of articaine hydrochloride + 1 ml of saline) was applied to the control group. Anesthesia duration was assessed as primary outcomes. Anesthesia duration was evaluated using a vitalometer from the molars. Secondary outcomes included postoperative pain and edema measured on the 1st, 3rd, and 7th days after surgery. Pain was evaluated postoperatively by using a visual analog scale. A p-value < 0.05 was considered statistically significant. RESULTS: The study included 45 patients with similar demographic characteristics across groups. IV application significantly prolonged anesthesia duration compared to the control group. (p = 0.049) Both IV and PN administration of DXN reduced postoperative edema at 3rd (p = 0.048) and 7th day (p = 0.01). Post-procedure pain reduction was significant in the IV group (p = 0.011). On the other hand, it was observed that the pain did not decrease in the PN group at 3rd and 7th days compared to the control and IV groups. CONCLUSIONS: PN and IV DXN administration prolonged anesthesia duration and reduced postoperative edema in ITM surgeries. However, PN DXN administration was associated with increased postoperative pain compared to IV DXN and control groups. Further studies comparing different doses and administration routes of DXN are needed to determine optimal strategies for managing postoperative discomfort in ITM surgeries. TRIAL REGISTRATION: This study was conducted at Ahmet Kelesoglu Faculty of Dentistry with the permission of Karamanoglu Mehmetbey University Faculty of Medicine Ethics Committee (#04-2022/101). Trial registration is also available at clinicaltrail.gov. (NCT06318013, 26/05/2024).

Influence of alveolar bone thickness and bucco-palatal inclination on root resorption of lateral incisors in unilateral maxillary impacted canines: a retrospective observational study.

BACKGROUND: This study aimed to investigate the potential associations between alveolar bone thickness, bucco-palatal inclination of maxillary lateral incisors, and lateral incisor root resorption in patients with unilateral maxillary impacted canines (UMICs). METHODS: A total of three hundred and five subjects (120 males, 185 females; mean age, 16.39 years; standard deviation, 4.04) with UMICs were included. Canine position and root resorption were assessed using CBCT. UMICs were divided into palatal, buccal and mid-alveolus groups (PICs, BICs and MAICs), with 117, 137 and 51 subjects, respectively. Alveolar bone thickness and bucco-palatal inclination of lateral incisors were measured using the Dolphin software. RESULTS: The prevalence of lateral incisor root resorption was significantly lower in the BICs (13.9%) than MAICs (29.4%) and PICs (29.1%). Alveolar bone thickness of the apical area was smaller in UMICs with lateral incisor root resorption than no resorption in both PICs (8.33 ± 1.64 vs 10.53 ± 2.55 mm) and BICs (8.94 ± 1.85 vs 10.76 ± 2.28 mm). Furthermore, lateral incisors on the impacted side were more buccally inclined in PICs with lateral incisor root resorption than no resorption, while in both BICs and MAICs, there was no statistical difference between lateral incisor root resorption than no resorption. Moreover, alveolar bone thickness of the apical area, rather than bucco-palatal inclination of lateral incisors, was significantly correlated with lateral incisor root resorption both in PICs and BICs. CONCLUSIONS: Lateral incisor root resorption is less common in BICs. Thinner alveolar bone thickness at the apical area of lateral incisors can be considered as a potential risk factor for lateral incisor root resorption in UMICs.

Treatment and genetic analysis of multiple supernumerary and impacted teeth in an adolescent patient.

BACKGROUND: Multiple supernumerary teeth, combined with numerous impacted teeth, can lead to various malocclusions, posing significant treatment challenges. While certain genes associated with syndromic cases of multiple supernumerary and impacted teeth have been identified, the etiologies of non-syndromic cases still largely remain elusive. CASE PRESENTATION: Here, we report a treatment of a 12-year-old boy who presented with 10 supernumerary teeth and 6 impacted teeth, accompanied by a genetic analysis to explore the underlying etiology. During the treatment, fifteen teeth were extracted, and various skilled techniques, including the closed-eruption technique and the application of by-pass arches, were utilized. Post-treatment, traction was successful for all the impacted teeth, without any tooth mobility or reduction in gingival height. Space closure, well-aligned teeth, and excellent functional occlusion were achieved. Furthermore, comprehensive genetic analysis was conducted through whole-exome sequencing on the patient and his parents, which revealed a potential link between the patient's numerous supernumerary teeth and abnormal mineralization. Notably, the p.Ser496Pro variant in the TCF7L2 gene was identified as a potential candidate variant in this patient. CONCLUSIONS: Overall, our findings not only report the treatment of a rare case involving multiple supernumerary and impacted teeth but also offer valuable insights into the molecular basis of supernumerary teeth.