Lipid-Gelucire based rectal delivery of ramipril prodrug exhibits significant lowering of intra-ocular pressure in normotensive rabbit: sustained structural relaxation release kinetics and IVIVC.

Carboxylesterase enzymes convert a prodrug ramipril into the biologically active metabolite ramiprilat. It is prescribed for controlling ocular hypertension after oral administration. High concentrations of carboxylesterase enzymes in rectal and colon tissue can transform ramipril significantly to ramiprilat. Sustained rectal delivery of ramipril has been developed for intra-ocular pressure lowering effect using a normotensive rabbit model. Rectal suppositories have been formulated using a matrix base of HPMC K100-PEG 400-PEG 6000, incorporating varying amounts of Gelucire by the fusion moulding method. The presence of Gelucire in the suppository exhibited sustained structural relaxation-based release kinetics of RM compared to its absence. Intravenous and oral administration of ramipril has decreased IOP in the treated rabbit up to 90 and 360 min, respectively. Treated rabbits with suppositories have revealed decreased IOP for an extended period compared to the above. Formulation containing GEL 3% reduced intra-ocular pressure to 540 min, with the highest area under the decreased IOP curve. Compared to oral, the pharmacodynamic bioavailability of ramipril has been improved significantly using a sustained-release rectal suppository. A rectal suppository for sustained delivery of ramipril could be used to lower IOP significantly.

Development of a Novel Gastric Process Simulation Model: The Successful Assessment of Bioequivalence and Bioinequivalence of a Biopharmaceutics Classification System Class II Weak Acid Drug.

Bioequivalence has been assessed using in vitro dissolution testing, such as in vivo predictive dissolution methodology. However, the assessment of bioequivalence should be performed carefully, considering the effect of the in vivo environment and according to the properties of the drug. The gastric emptying process is a key factor for the assessment of biopharmaceutics classification system class II (BCS class IIa) drugs with acidic properties since they cannot dissolve in the acidic stomach, but do dissolve in the small intestine (SI). The disintegration of a tablet in the stomach affects the distribution/dissolution in the SI due to the difference in the gastric emptying step, which in turn is a result of the varying formulation of the drugs. In this study, we used the reported dynamic pH change method and a novel gastric process simulation (GPS) model, which can compare the gastric emptying of particular-sized drug particles. The in vitro results were compared to clinical data using bioequivalent and bioinequivalent products of candesartan cilexetil. It was revealed that the dynamic pH change method was inappropriate, whereas the amount of filtered drug in GPS studies with 20 and 50 µm pore size filters could reflect the clinical results of all products. The evaluation of the gastric emptying process of drug particles less than 50 µm enabled us to assess the bioequivalence because they probably caused the difference in the distribution in the SI. This study demonstrated the utility of the GPS model for the assessment of bioequivalence of BCS class IIa drugs.

IVIVC of Octreotide in PLGA-Glucose Microsphere Formulation, Sandostatin® LAR.

In vitro-in vivo correlation (IVIVC) analysis reveals a relationship between in vitro release and in vivo pharmacokinetic response of the drug of interest. Sandostatin LAR Depot (SLD) for endocrine tumors and acromegaly is a sustained-release formulation of octreotide, a cyclic oligomer of 8 amino acids, which prolongs therapeutic efficacy and enhances medication compliance of octreotide. Since the efficacy of SLD is dependent on the pharmacokinetic characteristics of octreotide released from a biodegradable matrix polymer, poly(lactide-co-glycolide)-glucose, of SLD, the IVIVC of SLD is critical for predicting an in vivo behavior of the octreotide. In this study, in vitro release of octreotide from SLD was investigated using the release test media each containing 0.02% or 0.5% surfactant and having different pH values of 7.4 and 5.5. In vivo pharmacokinetic profiles of SLD were determined by LC-MS/MS analysis of the systemic blood concentration of octreotide after the SLD injection to rodents. In IVIVC analysis, the Weibull model was adopted as a drug release model for biodegradable microsphere formulation. The IVIVC analyses revealed the in vitro release test condition of SLD with the highest IVIV correlation coefficient. By applying the in vitro release data to the model derived from the IVIVC analysis, pharmacokinetic parameters of SLD could be predicted with the prediction error of ± 10 ~ 15%. IVIVC analysis and pharmacokinetic prediction model of SLD in our study can be an efficient tool for the development of long-acting pharmaceutical dosage forms.

Physiologically Based Biopharmaceutics Model of Vildagliptin Modified Release (MR) Tablets to Predict In Vivo Performance and Establish Clinically Relevant Dissolution Specifications.

The objective of the study was to predict pharmacokinetic (PK) and pharmacodynamic (PD) parameters of matrix-based modified release (MR) drug product of vildagliptin. Physiologically based biopharmaceutics modeling (PBBM) was developed using GastroPlus™ based on the available data including immediate-release (IR) drug product of vildagliptin. In vitro-in vivo correlation (IVIVC) was developed using mechanistic deconvolution to predict plasma concentration-time profile and PK parameters for a MR drug product planned for clinical use. Both methods, i.e., PBBM and IVIVC, were compared for the predicted PK parameters. Integration of DDDPlus™ and GastroPlus™ modeling was performed to explore clinically relevant dissolution specifications for vildagliptin MR tablets. The bioequivalence (BE) between batches with different dissolution specifications was evaluated using virtual clinical trials. The PD effect of dipeptidyl peptidase-IV (DPP-IV) inhibition was simulated utilizing PDPlus™ model in GastroPlus™. The results indicated that IVIVC best correlated the simulated PK parameters with those observed with the clinical study. The outcomes highlight the importance of integration of in vitro and in silico tools towards predictability of PK and PD parameters for a MR drug product. However, the post absorptive phase was found to be more dependent on the demographics of the healthy subjects.

Evaluation of species differences in the metabolism of the selective NaV1.7 inhibitor DS-1971a, a mixed substrate of cytochrome P450 and aldehyde oxidase.

Nonclinical metabolite profiling of DS-1971a, a potent selective NaV1.7 inhibitor, was performed to predict human metabolites.After the oral administration of radiolabelled DS-1971a, the predominant metabolite in mouse plasma was M4, a monoxide at the pyrimidine ring, while the major metabolites with the first and second highest exposure in monkey plasma were M2, a monoxide at the cyclohexane ring, and M11, a demethylated pyrazole metabolite.Incubation studies with liver cytosolic and microsomal fractions in the absence or presence of NADPH indicated that the metabolising enzyme responsible for M4 formation was aldehyde oxidase (AO), while cytochrome P450s (P450s) were responsible for M2 and M11 formation. These results suggest that DS-1971a is a substrate for both AO and P450.When DS-1971a was incubated with liver S9 fractions and NADPH, the most abundant metabolites were M4 in mice, and M2 and M11 in monkeys, indicating that the results of in vitro incubation studies could provide information reflecting the in vivo plasma metabolite profiles in mice and monkeys. The results obtained from the incubation with the human liver S9 fraction and NADPH suggested that a major circulating metabolite in humans is M1, a regioisomer of M2.

In vivo-in vitro correlation of antitumor activity of heat shock protein 90 (HSP90) inhibitors with a pharmacokinetics/pharmacodynamics analysis using NCI-N87 xenograft mice.

The in vitro antitumor activity (e.g. IC50) of anticancer drugs is important for selecting candidate compounds for in vivo drug efficacy study in the early stage of drug discovery. In this study, we investigated the relationship between in vitro IC50 and in vivo EC50 using six heat shock protein 90 (HSP90) inhibitors.IC50 of each compound was calculated from in vitro cell proliferation assays using the NCI-N87 cancer cell line. Each compound was administered to NCI-N87 xenograft mice, and EC50 and the maximum tumour-killing rate constant were calculated from pharmacokinetics/pharmacodynamics analyses using plasma concentrations and tumour volumes.IC50 obtained in vitro was poorly correlated with EC50 obtained in vivo, while a good correlation (r = 0.856) was observed between them when corrected with the unbound fraction ratio.The results of this study using of HSP90 inhibitors as model compounds suggest importance of the consideration of an unbound fraction to evaluate the relationship between IC50 and EC50. These results will contribute to improvement in the prediction accuracy of in vivo drug efficacy from in vitro activity and the efficiency of drug discovery research.

Prediction of Human Hepatic Clearance for Cytochrome P450 Substrates via a New Culture Method Using the Collagen Vitrigel Membrane Chamber and Fresh Hepatocytes Isolated from Liver Humanized Mice.

In drug discovery, hepatocytes have been widely utilized as in vitro tools for predicting the in vivo hepatic clearance (CL) of drug candidates. However, conventional hepatocyte models do not always reproduce in vivo physiological function, and CYP activities in particular decrease quite rapidly during culture. Furthermore, conventional in vitro assays have limitations in their ability to predict hepatic CL of metabolically stable drug candidates. In order to accurately predict hepatic CL of candidate drugs, a new method of culturing hepatocytes that activates their functional properties, including CYP activities, is in high demand. In the previous study, we established a novel long-term culture method for PXB-cells® using a collagen vitrigel membrane (CVM) chamber, which can maintain CYP activity and liver specific functions at high levels for several weeks. In this study, the vitrigel culture method was applied to predictions of hepatic CL for 22 CYP typical substrates with low to middle CL, and the prediction accuracy by this method was assessed by comparing CL data between predicted (in vitro intrinsic CL using the dispersion model) and observed (in vivo clinical data) values. The results of this study showed that in vitro CL values for approximately 60% (13/22) and 80% (18/22) of the compounds were predicted within a 2- and 3-fold difference with in vivo CL, respectively. These results suggest that the new culture method using the CVM chamber and PXB-cells is a promising in vitro system for predicting human hepatic CL with high accuracy for CYP substrates, including metabolically stable drug candidates.

Bayesian knowledge integration for an in vitro-in vivo correlation model.

The primary goal of "in vitro-in vivo correlation" (IVIVC) is the reliable prediction of the in vivo serum concentration-time course, based on the in vitro drug dissolution or release profiles. IVIVC methods are particularly appropriate for formulations that are released over an extended period of time or with a lag in absorption and may support approving a change in formulation of a drug without additional bioequivalence trials in human subjects. Most of the current IVIVC models are assessed using frequentist methods, such as linear regression, based on averaged data and entail complex and potentially unstable mathematical deconvolution. The proposed IVIVC approach includes (a) a nonlinear-mixed effects model for the in vitro release data; (b) a population pharmacokinetic (PK) compartment model for the in vivo immediate release (IR) data; and (c) a system of ordinal differential equations (ODEs), containing the submodels (a) and (b), which approximates and predicts the in vivo controlled release (CR) data. The innovation in this paper consists of splitting the parameter space between submodels (a) and (b) versus (c). Subsequently, the uncertainty on these parameters is accounted for using a Bayesian framework, that is estimates from the first two submodels serve as priors for the Bayesian hierarchical third submodel. As such, the Bayesian method explained ensures a natural integration and transfer of knowledge between various sources of information, balancing possible differences in sample size and parameter uncertainty of in vitro and in vivo studies. Consequently, it is a very flexible approach yielding results for a broad range of data situations. The application of the method is demonstrated for a transdermal patch (TD).

In Vitro-In Vivo Predictive Dissolution-Permeation-Absorption Dynamics of Highly Permeable Drug Extended-Release Tablets via Drug Dissolution/Absorption Simulating System and pH Alteration.

Each of dissolution and permeation may be a rate-limiting factor in the absorption of oral drug delivery. But the current dissolution test rarely took into consideration of the permeation property. Drug dissolution/absorption simulating system (DDASS) valuably gave an insight into the combination of drug dissolution and permeation processes happening in human gastrointestinal tract. The simulated gastric/intestinal fluid of DDASS was improved in this study to realize the influence of dynamic pH change on the complete oral dosage form. To assess the effectiveness of DDASS, six high-permeability drugs were chosen as model drugs, including theophylline (pKa1 = 3.50, pKa2 = 8.60), diclofenac (pKa = 4.15), isosorbide 5-mononitrate (pKa = 7.00), sinomenine (pKa = 7.98), alfuzosin (pKa = 8.13), and metoprolol (pKa = 9.70). A general elution and permeation relationship of their commercially available extended-release tablets was assessed as well as the relationship between the cumulative permeation and the apparent permeability. The correlations between DDASS elution and USP apparatus 2 (USP2) dissolution and also between DDASS permeation and beagle dog absorption were developed to estimate the predictability of DDASS. As a result, the common elution-dissolution relationship was established regardless of some variance in the characteristic behavior between DDASS and USP2 for drugs dependent on the pH for dissolution. Level A in vitro-in vivo correlation between DDASS permeation and dog absorption was developed for drugs with different pKa. The improved DDASS will be a promising tool to provide a screening method on the predictive dissolution-permeation-absorption dynamics of solid drug dosage forms in the early-phase formulation development.

Pharmacokinetics of Abamectin/Levamisole Combination in a Medium Chain Mono and Diglyceride-Based Vehicle and an In Vitro Release and In Vitro In Vivo Correlation Study for Levamisole.

A combination of lipophilic and hydrophilic drugs in a single solution is a challenge due to their different physicochemical properties. In vitro and in vivo release studies are useful to optimize this solution. The in vitro (Franz diffusion cell) release rate of levamisole phosphate from an isotropic vehicle of medium chain mono and diglycerides (MCMDG) was significantly slower than the release from water. The injectable solution of the isotropic MCMDG-based system was prepared with 13.65% of levamisole phosphate and 0.5% of abamectin. Two milliliters/50 kg (0.04 ml/kg) was injected subcutaneously into five healthy adult sheep. None of the animals showed the signs of inflammation at injection site. Both drugs were assayed using validated HPLC methods. The absorption rates for levamisole (0.71 ± 0.32 h-1) and abamectin (0.24 ± 0.08 day-1) from the MCMDG-based formulation were considerably slower than those of other studies conducted on the commercial products. The tmax was delayed for levamisole (2.20 ± 0.45 h) and abamectin (4.20 ± 1.64 days) compared with those in published studies. Longer MRT values for levamisole (6.14 ± 1.14 h) and abamectin (8.80 ± 1.39 days) were found in this study compared to those reported. A correlation was observed between in vivo fraction absorbed and in vitro fraction released for levamisole phosphate in the MCMDG-based formulation. The injection vehicle of isotropic MCMDG-based system delayed the subcutaneous absorption of levamisole phosphate and abamectin compared to the commercial subcutaneous injection products for levamisole and abamectin. Notably, this isotropic MCMDG-based vehicle system is prepared with a combination of two drugs with different physicochemical properties.

Development and validation of a new dynamic computer-controlled model of the human stomach and small intestine.

For ethical, regulatory, and economic reasons, in vitro human digestion models are increasingly used as an alternative to in vivo assays. This study aims to present the new Engineered Stomach and small INtestine (ESIN) model and its validation for pharmaceutical applications. This dynamic computer-controlled system reproduces, according to in vivo data, the complex physiology of the human stomach and small intestine, including pH, transit times, chyme mixing, digestive secretions, and passive absorption of digestion products. Its innovative design allows a progressive meal intake and the differential gastric emptying of solids and liquids. The pharmaceutical behavior of two model drugs (paracetamol immediate release form and theophylline sustained release tablet) was studied in ESIN during liquid digestion. The results were compared to those found with a classical compendial method (paddle apparatus) and in human volunteers. Paracetamol and theophylline tablets showed similar absorption profiles in ESIN and in healthy subjects. For theophylline, a level A in vitro-in vivo correlation could be established between the results obtained in ESIN and in humans. Interestingly, using a pharmaceutical basket, the swelling and erosion of the theophylline sustained release form was followed during transit throughout ESIN. ESIN emerges as a relevant tool for pharmaceutical studies but once further validated may find many other applications in nutritional, toxicological, and microbiological fields. Biotechnol. Bioeng. 2016;113: 1325-1335. © 2015 Wiley Periodicals, Inc.

Design and Evaluation of a Novel Felbinac Transdermal Patch: Combining Ion-Pair and Chemical Enhancer Strategy.

The aim of this study was to design a novel felbinac (FEL) patch with significantly higher (P < 0.05) skin permeation amount than the commercial product SELTOUCH® using ion-pair and chemical enhancer strategy, overcoming the disadvantage of the large application area of SELTOUCH®. Six complexes of FEL with organic amines diethylamine (DEA), triethylamine (TEA), N-(2'-hydroxy-ethanol)-piperdine (HEPP), monoethanolamine (MEtA), diethanolamine (DEtA), and triethanolamine (TEtA) were prepared by ion-pair interaction, and their formation were confirmed by differential scanning calorimetry (DSC), powder X-ray diffraction (pXRD), infared spectroscopy (IR), and proton nuclear magnetic resonance spectroscopy ((1)H-NMR). Subsequently, the effect of ion-pair complexes and chemical enhancers were investigated through in vitro and in vivo experiments using rabbit abdominal skin. Results showed that FEL-TEA was the most potential candidate both in isopropyl palmitate (IPP) solution and transdermal patches. Combining use of 10% N-dodecylazepan-2-one (Azone), the optimized FEL-TEA patch achieved a flux of 18.29 ± 2.59 µg/cm(2)/h, which was twice the amount of the product SELTOUCH® (J = 9.18 ± 1.26 µg/cm(2)/h). Similarly, the area under the concentration curve from time 0 to time t (AUC0-t ) in FEL-TEA patch group (15.94 ± 3.58 h.µg/mL) was also twice as that in SELTOUCH® group (7.31 ± 1.16 h.µg/mL). Furthermore, the in vitro skin permeation results of FEL-TEA patch was found to have a good correlation with the in vivo absorption results in rabbit. These findings indicated that a combination of ion-pair and chemical enhancer strategy could be useful in developing a novel transdermal patch of FEL.

In vitro-in vivo correlations for three different commercial immediate-release indapamide tablets.

The objective of this study was to develop and validate the in vitro-in vivo correlations (IVIVCs) of three commercially available immediate-release solid dosage forms of indapamide using drug dissolution/absorption simulating system (DDASS). The in vitro dissolution profiles of three brands of immediate-release tablets were obtained using the USP I basket method and DDASS. A single-dose, three-way, crossover pharmacokinetic study for the tablets was carried out in six beagle dogs. Correlation models were developed for each immediate release formulation using cumulative percentage dissolved/eluted (Fd) versus cumulative percentage absorbed (Fa) and cumulative percentage permeated (Fp) versus cumulative percentage absorbed (Fa). Prediction errors were estimated for the Cmax and AUC to determine the validity of the correlation. Level A IVIVCs were established for the three brands between in vitro (dissolution and permeation) data from DDASS and in vivo data from dogs. Predicted plasma concentrations of each commercial brand were obtained from the dissolution and permeation profile data using the correlation models. A percent prediction error of <15% for the Cmax and AUC was found for all of the formulations, which validates the internal predictability of the IVIVC models obtained. However, the IVIVC models from the permeation data failed to predict the AUC. The results support the use of in vitro dissolution and permeation data as a surrogate for bioequivalent study and suggest that DDASS can be applied as an in vitro system for the validated-IVIVC development of BCS II solid drug formulations.

A convolution-based in vitro-in vivo correlation model for methylphenidate hydrochloride delayed-release and extended-release capsule.

Delayed-release and extended-release methylphenidate hydrochloride (JORNAY PM®) is a novel capsule formulation of methylphenidate hydrochloride, used to treat attention deficit hyperactivity disorder in patients 6 years and older. In this paper, we develop a Level A in vitro-in vivo correlation (IVIVC) model for extended-release methylphenidate hydrochloride to support post-approval manufacturing changes by evaluating a point-to-point correlation between the fraction of drug dissolved in vitro and the fraction of drug absorbed in vivo. Dissolution data from an in vitro study of three different release formulations: fast, medium, and slow, and pharmacokinetic data from two in vivo studies were used to develop an IVIVC model using a convolution-based approach. The time-course of the drug concentration resulting from an arbitrary dose was considered as a function of the in vivo drug absorption and the disposition and elimination processes defined by the unit impulse response function using the convolution integral. An IVIVC was incorporated in the model due to the temporal difference seen in the scatterplots of the estimated fraction of drug absorbed in vivo and the fraction of drug dissolved in vitro and Levy plots. Finally, the IVIVC model was subjected to evaluation of internal predictability. This IVIVC model can be used to predict in vivo profiles for different in vitro profiles of extended-release methylphenidate hydrochloride.

Physiologically-Based Pharmacokinetic Modeling and In Vitro-In Vivo Correlation of TV-46000 (Risperidone LAI): Prediction from Dog to Human.

The interest in the development and therapeutic application of long-acting injectable products for chronic or long-term treatments has experienced exponential growth in recent decades. TV-46000 (Uzedy, Teva) is a long-acting subcutaneous (sc) injectable formulation of risperidone, approved for the treatment of schizophrenia in adults. Following sc injection, the copolymers together with risperidone precipitate to form a sc depot under the skin to deliver therapeutic levels of risperidone over a prolonged period of either 1 month or 2 months, depending upon the dose. This work presents the strategy and the results of the physiologically-based pharmacokinetic (PBPK) modeling and establishing of in vitro-in vivo correlation (IVIVC) for the prediction of TV-46000 pharmacokinetic profile in humans, using in vitro release, intravenous (iv), and sc single-dose pharmacokinetic data in beagle dogs. The resulting simulated TV-46000 PK profile in humans showed that the shape of the predicted risperidone and its active metabolite 9-OH-risperidone PK profiles was different from the observed one, thus suggesting that the TV-46000 release profile was species-dependent and cannot be directly extrapolated from dog to human. In conclusion, while level A IVIVC cannot be claimed, this work combining PBPK and IVIVC modeling represents an interesting alternative approach for complex injectable formulations where classical methods are not applicable.

Physiologically based in vitro - In vivo correlation of modified release oral formulations with non-linear intestinal absorption: A case study using mirabegron.

Establishing an in vitro - in vivo correlation (IVIVC) for oral modified release (MR) formulations would make it possible to substitute an in vitro dissolution test for human bioequivalence (BE) studies when changing the formulation or manufacturing methods. However, the number of IVIVC applications and approvals are reportedly low. One of the main reasons for failure to obtain IVIVCs using conventional methodologies may be the lack of consideration of the dissolution and absorption mechanisms of drugs in the physiological environment. In particular, it is difficult to obtain IVIVC using conventional methodologies for drugs with non-linear absorption processes. Therefore, the aim of the present study was to develop a physiologically based biopharmaceutics model (PBBM) that enables Level A IVIVCs for mirabegron MR formulations with non-linear absorption characteristics. Using human pharmacokinetic (PK) data for immediate-release formulations of mirabegron, the luminal drug concentration-dependent membrane permeation coefficient was calculated through curve fitting. The membrane permeation coefficient data were then applied to the human PK data of the MR formulations to estimate the in vivo dissolution rate by curve fitting. It was assumed that in vivo dissolution could be described using a zero-order rate equation. Furthermore, a Levy plot was generated using the estimated in vivo dissolution rate and the in vitro dissolution rate obtained from the literature. Finally, the dissolution rate of the MR formulations from the Levy plot was applied to the PBBM to predict the oral PK of the mirabegron MR formulations. This PB-IVIVC approach successfully generated linear Levy plots with slopes of almost 1.0 for MR formulations with different dose strengths and dissolution rates. The Cmax values of the MR formulations were accurately predicted using this approach, whereas the prediction errors for AUC exceeded the Level A IVIVC criteria. This can be attributed to the incomplete description of colonic absorption in the current PBBM.

Towards in vitro - In vivo correlation models for in situ forming drug implants.

In vitro-In vivo correlation (IVIVC) is a main focus of the pharmaceutical industry, academia and the regulatory sectors, as this is an effective modelling tool to predict drug product in vivo performance based on in vitro release data and serve as a surrogate for bioequivalence studies, significantly reducing the need for clinical studies. Till now, IVIVCs have not been successfully developed for in situ forming implants due to the significantly different in vitro and in vivo drug release profiles that are typically achieved for these dosage forms. This is not unexpected considering the unique complexity of the drug release mechanisms of these products. Using risperidone in situ forming implants as a model, the current work focuses on: 1) identification of critical attributes of in vitro release testing methods that may contribute to differences in in vitro and in vivo drug release from in situ forming implants; and 2) optimization of the in vitro release method, with the aim of developing Level A IVIVCs for risperidone implants. Dissolution methods based on a novel Teflon shape controlling adapter along with a water non-dissolvable glass fiber membrane (GF/F) instead of a water dissolvable PVA film (named as GF/F-Teflon adapter and PVA-Teflon adapter, respectively), and an in-house fabricated Glass slide adapter were used to investigate the impact of: the surface-to-volume ratio, water uptake ratio, phase separation rate (measured by NMP release in 24 h post injection in vitro or in vivo), and mechanical pressure on the drug release patterns. The surface-to-volume ratio and water uptake were shown to be more critical in vitro release testing method attributes compared to the phase separation rate and mechanical pressure. The Glass slide adapter-based dissolution method, which allowed for the formation of depots with bio-mimicking surface-to-volume ratios and sufficient water uptake, has the ability to generate bio-relevant degradation profiles as well as in vitro release profiles for risperidone implants. For the first time, a Level A IVIVC (rabbit model) has been successfully developed for in situ forming implants. Release data for implant formulations with slightly different PLGA molecular weights (MWs) were used to develop the IVIVC. The predictability of the model passed external validation using the reference listed drug (RLD), Perseris®. IVIVC could not be developed when formulations with different PLGA molar ratios of lactic acid to glycolic acid (L/G) were included. The present work provides a comprehensive understanding of the impact of the testing method attributes on drug release from in situ forming implants, which is a valuable practice for level A IVIVC development.

Use of In silico Methodologies to Predict the Bioavailability of Oral Suspensions: A Regulatory Approach.

BACKGROUND: Oral suspensions are heterogeneous disperse systems, and the particle size distribution, crystalline form of the dispersed solid, and composition of the formulation can be listed as parameters that control the drug dissolution rate and its bioavailability. OBJECTIVE: The aim of this work was to develop a discriminative dissolution test, which, in association with in silico methodologies, can make it possible to safely anticipate bioavailability problems. METHODS: Nimesulide and ibuprofen (BCS class II) and cephalexin (BCS class I) oral suspensions were studied. Previously, solid-state structure and particle size in active pharmaceutical ingredients were characterized and the impact of differences on solubility was evaluated for the choice of discriminative medium. Afterwards, particle size distribution (0.1 to 360 µm), dissolution profile, and in vitro permeability in Caco-2 cell of commercial suspensions, were determined. These parameters were used as input for the establishment of the in vitro-in vivo correlation (IVIVC) for the suspensions using the GastroPlus™ with Wagner-Nelson and Loo- Riegelmann deconvolution approach. RESULTS: The predicted/observed pharmacokinetic model showed good correlation coefficients (r) of 0.960, 0.950, and 0.901, respectively. The IVIVC was established for one nimesulide and two ibuprofen suspensions with r between 0.956 and 0.932, and the percent prediction error (%PE) did not exceed 15%. CONCLUSION: In this work, we have performed a complete study combining in vitro/in silico approaches with the aim of anticipating the safety and efficacy of oral pharmaceutical suspensions in order to provide a regulatory tool for this category of products in a faster and more economical way.

Advanced harmonization techniques result in accurate establishment of in vitro-in vivo correlations for oxybenzone from four complex dermal formulations with reapplication.

Due to high variability during clinical pharmacokinetic (PK) evaluation, the prediction of in vivo exposure from in vitro absorption testing of topical semisolid and liquid dermal products has historically proven difficult. Since absorption from unoccluded formulations can be influenced by environmental factors such as temperature and humidity, maximal effort must be placed on the harmonization of experimental parameters between in vitro and in vivo testing conditions to establish accurate in vitro/in vivo correlations (IVIVC). Using four different sunscreen formulations as a model, we performed in vitro permeation testing (IVPT) studies with excised human skin and maintained strict harmonization techniques to control application time, occlusion, temperature, and humidity during in vivo human serum PK evaluation. The goal was to investigate if increased control over experimental parameters would result in decreased inter-subject variability of common topical formulations leading to acceptable IVIVC establishment. Using a deconvolution-based approach, excellent point-to-point (Level A correlation) IVIVC for the entire 12-h study duration was achieved for all four sunscreen formulations with < 10% prediction error of both area under the curve (AUC) and peak concentration (Cmax) estimation. The low variability of in vivo absorption data presents a proof-of-concept protocol design for testing of complex semisolid and liquid topical formulations applied over a large surface area with reapplication in a reliable manner. This work also presents the opportunity for expanded development of testing for the impact of altered temperature and humidity conditions on product absorption in vivo with a high degree of precision.

Mechanistic evaluation of the initial burst release of leuprolide from spray-dried PLGA microspheres.

Spray-dried poly(lactic-co-glycolic acid) (PLGA) peptide-loaded microspheres have demonstrated similar long-term in vitro release kinetics compared to those produced by the solvent evaporation method and commercial products. However, the difficult-to-control initial burst release over the first 24 h after administration presents an obstacle to product development and establishing bioequivalence. Currently, detailed information about underlying mechanisms of the initial burst release from microspheres is limited. We investigated the mechanism and extent of initial burst release using 16 previously developed spray-dried microsphere formulations of the hormone drug, leuprolide acetate, with similar composition to the commercial 1-month Lupron Depot® (LD). The burst release kinetics was measured with a previously validated continuous monitoring system as well as traditional sample-and-separate methods. The changes in pore structure and polymer permeability were investigated by SEM imaging and the uptake of a bodipy-dextran probe. In vitro results were compared to pharmacokinetics in rats over the same interval. High-burst, spray-dried microspheres were differentiated in the well-mixed continuous monitoring system but reached an upper limit when measured by the sample-and-separate method. Pore-like occlusions observed by confocal microscopy in some formulations indicated that particle swelling may have contributed to probe diffusion through the polymer phase and showed the extensive internal pore structure of spray-dried particles. Continuous monitoring revealed a rapid primary (1°) phase followed by a constant-rate secondary (2°) release phase, which comprised ∼80% and 20% of the 24-hr release, respectively. The ratio of 1° phase duration (t1°) and the characteristic probe diffusion time (τ) was highly correlated to 1° phase release for spray dried particles. Of the four spray-dried formulations administered in vivo, three spray-dried microspheres with similar polymer density showed nearly ideal linear correlation between in vivo absorption and well-mixed in vitro release kinetics over the first 24 h. By contrast, the more structurally dense LD and a more-dense in-house formulation showed a slight lag phase in vivo relative to in vitro. Furthermore, in vitro dimensionless times (tburst/τ) were highly correlated with pharmacokinetic parameters for spray-dried microspheres but not for LD. While the correlation of increases in effective probe diffusion and 1° phase release strongly suggests diffusion through the polymer matrix as a major release mechanism both in vitro and in vivo, a fixed lower limit for this release fraction implies an alternative release mechanism. Overall, continuous monitoring release and probe diffusion appears to have potential in differentiating between leuprolide formulations and establishing relationships between in vitro release and in vivo absorption during the initial burst period.