Hydration and properties of hydrogen-based mineral phase transformation iron ore tailings as supplementary cementitious material.

Almost all iron ore tailings (IOTs) required activation prior to use as SCMs, which limited their application in building materials. This study investigated HMPT-IOTs and discovered that they possess latent hydraulic and pozzolanic properties. In order to better utilize as SCM, mechanical properties, hydration reactions, hydration products, microstructure, and pores were comprehensively studied through mechanical tests, hydration heat tests, XRD, SEM, TG, and MIP. The results show that when HMPT-IOTs replace cement at 10 wt%, 20 wt% and 30 wt%, the compressive strength at 28 days is 41.9 MPa, 47.9 MPa and 37.5 MPa, respectively. When the substitution amount reaches 30 wt%, it will reduce the cumulative heat of hydration and promote early hydration reactions. The main hydration products are ettringite and Ca(OH)2. As the nucleation site of C-S-H, hydration products are interconnected, making the microstructure denser. At this substitution level, Ca(OH)2 consumption was about 2% at 28 days of age. Simultaneously, the total pore volume was only 0.01 mL/g greater than that of the control group, and the number of micropores and transition pores decreased by approximately 3%.

The Preparation and Dust Suppression Performance Evaluation of Iron Ore Tailing-Based Cementitious Composites.

In order to comprehensively utilize iron ore tailings (IOTs), the possibility of using IOTs as raw materials for the preparation of cementitious composites (IOTCCs) was investigated, and IOTCC was further applied to mine interface pollution control. The mechanical properties, hydration products, wind erosion resistance, and freeze-thaw (F-T) cycle resistance of IOTCCs were evaluated rigorously. The activity index of iron tailings increased from 42% to 78% after grinding for 20 s. The IOTCC was prepared by blending 86% IOT, 10% ground granulated blast-furnace slag (GGBS), and 4% cement clinker. Meanwhile, the hydration products mainly comprised ettringite, calcium hydroxide, and C-S-H gel, and they were characterized via XRD, IR, and SEM. It was observed that ettringite and C-S-H gel were principally responsible for the strength development of IOTCC mortars with an increase in curing time. The results show that the kaolinite of the tailings was decomposed largely after mechanical activation, which promoted the cementitious property of IOT.

Sustainable approach towards alternatives for the use of iron ore tailings in the construction sector using Data Envelopment Analysis methodology.

Iron ore tailings (IOTs) need to be properly managed to mitigate the environmental, social, and economic impacts of mining activities. To cope with this issue, we use data envelopment analysis (DEA) to evaluate alternatives for using IOT in the construction sector. The classical and weight restriction output-oriented DEA models were used in this analysis. The results show that the ranking of alternatives depends on the aspect being evaluated. Concrete block is the most environmentally friendly alternative when analysing both models. For both social and economic aspects, ceramics produced better results in the classical model, whereas Portland cement showed better outcomes in the weight restriction model. In this sense, the results suggest great potential for the use of IOT in the construction sector, enabling the reduction of risks and social and environmental impacts of tailings dams.

Nitrogen-Rich Organic Matter Formation and Stabilization in Iron Ore Tailings: A Submicrometer Investigation.

Organic matter (OM) formation and stabilization are critical processes in the eco-engineered pedogenesis of Fe ore tailings, but the underlying mechanisms are unclear. The present 12 month microcosm study has adopted nanoscale secondary ion mass spectrometry (NanoSIMS) and synchrotron-based scanning transmission X-ray microscopy (STXM) techniques to investigate OM formation, molecular signature, and stabilization in tailings at micro- and nanometer scales. In this system, microbial processing of exogenous isotopically labeled OM demonstrated that 13C labeled glucose and 13C/15N labeled plant biomass were decomposed, regenerated, and associated with Fe-rich minerals in a heterogeneous pattern in tailings. Particularly, when tailings were amended with plant biomass, the 15N-rich microbially derived OM was generated and bound to minerals to form an internal organo-mineral association, facilitating further OM stabilization. The organo-mineral associations were primarily underpinned by interactions of carboxyl, amide, aromatic, and/or aliphatic groups with weathered mineral products derived from biotite-like minerals in fresh tailings (i.e., with Fe2+ and Fe3+) or with Fe3+ oxyhydroxides in aged tailings. The study revealed microbial OM generation and subsequent organo-mineral association in Fe ore tailings at the submicrometer scale during early stages of eco-engineered pedogenesis, providing a basis for the development of microbial based technologies toward tailings' ecological rehabilitation.

Elemental Sulfur and Organic Matter Amendment Drive Alkaline pH Neutralization and Mineral Weathering in Iron Ore Tailings Through Inducing Sulfur Oxidizing Bacteria.

Mineral weathering and alkaline pH neutralization are prerequisites to the ecoengineering of alkaline Fe-ore tailings into soil-like growth media (i.e., Technosols). These processes can be accelerated by the growth and physiological functions of tolerant sulfur oxidizing bacteria (SOB) in tailings. The present study characterized an indigenous SOB community enriched in the tailings, in response to the addition of elemental sulfur (S0) and organic matter (OM), as well as resultant S0oxidation, pH neutralization, and mineral weathering in a glasshouse experiment. The addition of S0 was found to have stimulated the growth of indigenous SOB, such as acidophilic Alicyclobacillaceae, Bacillaceae, and Hydrogenophilaceae in tailings. The OM amendment favored the growth of heterotrophic/mixotrophic SOB (e.g., class Alphaproteobacteria and Gammaproteobacteria). The resultant S0 oxidation neutralized the alkaline pH and enhanced the weathering of biotite-like minerals and formation of secondary minerals, such as ferrihydrite- and jarosite-like minerals. The improved physicochemical properties and secondary mineral formation facilitated organo-mineral associations that are critical to soil aggregate formation. From these findings, co-amendments of S0 and plant biomass (OM) can be applied to enhance the abundance of the indigenous SOB community in tailings and accelerate mineral weathering and geochemical changes for eco-engineered soil formation, as a sustainable option for rehabilitation of Fe ore tailings.

Arbuscular Mycorrhizal Fungi Drive Organo-Mineral Association in Iron Ore Tailings: Unravelling Microstructure at the Submicron Scale by Synchrotron-Based FTIR and STXM-NEXAFS.

Arbuscular mycorrhizal (AM) fungi play an important role in organic matter (OM) stabilization in Fe ore tailings for eco-engineered soil formation. However, little has been understood about the AM fungi-derived organic signature and organo-mineral interactions in situ at the submicron scale. In this study, a compartmentalized cultivation system was used to investigate the role of AM fungi in OM formation and stabilization in tailings. Particularly, microspectroscopic analyses including synchrotron-based transmission Fourier transform infrared (FTIR) and scanning transmission X-ray microspectroscopy combined with near-edge X-ray absorption fine structure spectroscopy (STXM-NEXAFS) were employed to characterize the chemical signatures at the AM fungal-mineral and mineral-OM interfaces at the submicron scale. The results indicated that AM fungal mycelia developed well in the tailings and entangled mineral particles for aggregation. AM fungal colonization enhanced N-rich OM stabilization through organo-mineral association. Bulk spectroscopic analysis together with FTIR mapping revealed that fungi-derived lipids, proteins, and carbohydrates were associated with Fe/Si minerals. Furthermore, STXM-NEXAFS analysis revealed that AM fungi-derived aromatic, aliphatic, and carboxylic/amide compounds were heterogeneously distributed and trapped by Fe(II)/Fe(III)-bearing minerals originating from biotite-like minerals weathering. These findings imply that AM fungi can stimulate mineral weathering and provide organic substances to associate with minerals, contributing to OM stabilization and aggregate formation as key processes for eco-engineered soil formation in tailings.

Co-utilization of iron ore tailings and coal fly ash for porous ceramsite preparation: Optimization, mechanism, and assessment.

Maximizing the utilization of industrial by-products, such as iron ore tailings (IOTs) and coal fly ash (CFA), is crucial toward sustainable development. This study provides a meticulous insight into the optimization, mechanism, and assessment of the co-utilization of IOTs and CFA for the preparation of porous ceramsite. Micro-CT results revealed that the prepared ceramsite exhibited an exceptional porosity, peaking at 56.98%, with a wide range of pore diameters (3.55-959.10 µm) under optimal conditions (IOTs content at 76%, preheating at 550 °C for 15 min, and sintering at 1177 °C for 14 min), while maintaining good mechanical properties (water adsorption of 1.28%, comprehensive strength of 8.75 MPa, apparent density of 1.37 g/cm3, and bulk density of 0.62 g/cm3). The primary parameters affecting the porosity were identified and ranked as follows: sintering temperature > IOTs content > sintering time. The formation and growth of pores could be attributed to the equilibrium relationship between the liquid-phase surface tension and the gas expansion force, accompanied by pore wall thinning and pore merging. Notably, the prepared ceramsite is both ecologically feasible and economically rewarding, boasting a profit margin of 9.47 $/ton. The comprehensive life cycle assessment (LCA) conducted further highlights the potential of its large-scale implementation for promoting sustainable development. This study provides an innovative strategy for the co-utilization of IOTs and CFA, with advantages such as cost-effectiveness, ecological feasibility and scalability of production.

Eco-friendly strategy for preparation of high-purity silica from high-silica IOTs using S-HGMS coupling with ultrasound-assisted fluorine-free acid leaching technology.

Iron ore tailings (IOTs), a typical hazardous solid waste, seriously threaten human health and the ecological environment. However, the abundance of quartz, particularly in high-silica IOTs, renders them useful. Yet, state-of-the-art technologies have rarely reported the preparation of high-purity silica from high-silicon IOTs. Thus, this study proposed an eco-friendly technology for producing high-purity silica from high-silica IOTs through the coupling of superconducting high gradient magnetic separation (S-HGMS) preconcentration with leaching followed by the use of ultrasound-assisted fluorine-free acid solution. Following an analysis of the separation index and chemical composition, the optimum conditions for the quartz preconcentration were determined as a magnetic flow ratio of 0.068 T s/m, a slurry flow velocity of 500 mL/min, and a pulp concentration of 40 g/L. Consequently, the SiO2 grade increased from 69.32% in the raw sample to 93.12% in quartz concentrate following the application of S-HGMS, with the recovery reaching 45.24%. X-ray diffraction, vibrating sample magnetometer, and scanning electron microscope analyses indicated that quartz was effectively preconcentrated from the tailings by S-HGMS. Subsequently, employing the "ultrasound-assisted fluorine-free acid leaching process," impurity elements were removed and high-purity silica was produced. Under optimal leaching conditions, the SiO2 purity of silica sand increased to 97.42%. Following a three-stage acid leaching process with 4 mol/LHCl +2 mol/LH2C2O4, the removal efficiency of Al, Ca, Fe, and Mg exceeded 97% for all cases, and the SiO2 purity in high-purity silica reached 99.93%. Thus, this study proposes a new strategy for the preparation of high-purity quartz from IOTs, which facilitated the effective realization of the high-value utility of the tailings. Furthermore, it provides a theoretical basis for the industrial application of IOTs, which is of great scientific significance and practical application value.

Performance evaluation of Fe-based water treatment sludge for dewatering of iron ore tailings slurry using coagulation-flocculation process: Optimization through response surface methodology.

This research attempted to investigate the feasibility of using drinking water treatment sludge (ferric chloride sludge, FCS) as a coagulant for turbidity removal from iron ore tailings slurry. The evaluation was performed in two phases. In the first phase, the one factor at a time (OFAT) approach was used to study the effects of FCS dosage, initial pH, and initial turbidity on turbidity removal efficiency (TR%) and the volume of the sediment produced at the end of the process (SV). In the second phase, response surface methodology (RSM) was employed to assess the individual and interaction effects of the parameters on TR% and SV. Numerical multiple-response optimization was carried out using RSM to maximize TR% and minimize SV simultaneously. At optimum condition (FCS dose of 0.13 g dried FCS/L, initial pH of 10, and initial turbidity of 538 NTU), the removal of all particles in the range of 0.25-1 µm and 2-55 µm from slurry led to the TR% of 78.80% and SV of 0.74 mL (per 250 mL of tailings). Characterization tests indicated that at alkaline pH values, the higher presence of hydroxide compounds intensified the enmeshment in a precipitate or sweep-floc mechanism, which was the predominant removal mechanism in this work. This study demonstrated the remarkable performance of FCS as a coagulant in water reclamation from iron beneficiation wastewater.

Reverse logistics system applied to the reuse of iron ore tailings.

Iron ore tailings (IOT) from tailings dams cause significant environmental, economic, and social impacts, which has motivated the search for reuse alternatives. In this scenario, the present work uses reverse logistics to size the resources required to reuse the IOT for road infrastructure. A reverse logistics system was modelled to transport the IOT from the tailings dam to a processing plant and then to the construction site of a road. Resource capacity constraints and operational limitations were considered, and the economic feasibility of the system was analysed. Two scenarios for tailings transportation on the dam/plant route were simulated aiming at a cost less than R$ 25 (US$ 6.13) per tonne: (1) trucks; and (2) conveyor belts. The economic feasibility of both scenarios was proven, with scenario 1 presenting the most promising results - a transport distance of 290 km within the established price limit. This methodology can thus be applied to encourage the large-scale reuse of IOT.

An Aspergillus aculateus strain was capable of producing agriculturally useful nanoparticles via bioremediation of iron ore tailings.

Mining waste such as iron ore tailing is environmentally hazardous, encouraging researchers to develop effective bioremediation technologies. Among the microbial isolates collected from iron ore tailings, Aspergillus aculeatus (strain T6) showed good leaching efficiency and produced iron-containing nanoparticles under ambient conditions. This strain can convert iron ore tailing waste into agriculturally useful nanoparticles. Fourier-transform Infrared Spectroscopy (FT-IR analysis) established the at the particles are protein coated, with energy dispersive X-ray Spectroscopy (EDX analysis) showing strong signals for iron. Transmission Electron Microscopy (TEM analysis) showed semi-quasi spherical particles having average size of 15 ±â€¯5 nm. These biosynthesized nanoparticles when tested for their efficacy on seed emergence activity of mungbean (Vigna radiata) seeds, and enhanced plant growth at 10 and 20 ppm.

The Mechanical Properties and Microstructure of Tailing Recycled Aggregate Concrete.

The aim of this study was to develop sustainable concrete by recycling concrete aggregates from steel waste and construction waste (iron ore tailings (IOTs) and recycled coarse aggregates (RCAs)) to replace silica sand and natural coarse aggregates. In experimental testing, the compressive strength, peak strain, elastic modulus, energy dissipated under compression, and compressive stress-strain curve were analyzed. Microscopically, scanning electron microscopy and energy-dispersive spectrometry were employed to investigate the microstructural characteristics of the interfacial transition zone (ITZ), and the results were compared with the ITZs of natural aggregate concrete and recycled aggregate concrete (RAC). In addition, the pore structure of concrete was determined by nuclear magnetic resonance. The results revealed that an appropriate IOT content can improve the ITZ and compactness of RAC, as well as optimize the mechanical and deformation properties of RAC. However, due to the presence of a smaller number of microcracks on the surface of IOT particles, excessive IOTs could reduce the integrity of the matrix structure and weaken the strength of concrete. According to the research, replacing silica sand with 30% IOTs led to a reduction in the porosity and microcracking which resulted in a much denser microstructure.

Historical contamination with a current problem: Can mining tailings enhance coastal arsenic pollution?

The coast of Espírito Santo state (Southeast Brazil) is recognized for its environmental arsenic (As) enrichment and, over the years, mining operations have potentialized it. We aimed to evaluate the effect of Rio Doce discharge on As inputs and the role of iron ore tailings from the Fundão dam disaster in enhancing As contamination in the marine sediment. Two scenarios were evaluated: Predisaster and Postdisaster; dry and wet conditions were considered in each period. High As concentrations were found in the Predisaster (28.44 ± 13.53 µg g-1 ), but a significant increase in As was remarkable during the Postdisaster in the wet season, one year after the disaster (maximum of 58.39 µg g-1 ; geoaccumulation index (Igeo ) Class 3, moderately severe pollution). On that occasion, iron (Fe) oxy-hydroxides from tailings were remobilized from the Rio Doce channel and deposited on the continental shelf bottom. Therefore, chemical interactions among Fe, As, and carbonates were enhanced, resulting in As and Fe coprecipitation and the trapping by carbonate adsorption. Rio Doce discharge seems to be the main factor in As inputs to the inner continental shelf when flooding do not occur previously in samplings, which allows further dispersion of contaminants, although this hypothesis should be tested further. Integr Environ Assess Manag 2024;20:159-168. © 2023 SETAC.

Sustainable assessment and synergism of ceramic powder and steel slag in iron ore tailings-based concrete.

Solid waste management is a critical issue worldwide. Effectively utilizing these solid waste resources presents a viable solution. This study focuses on Iron ore tailings (IOTs), a solid waste generated during iron ore processing, which can be used as supplementary cementitious materials (SCMs) but have low reactivity, hindering their large-scale application in concrete production. To address this, ternary SCMs were prepared using ceramic powder (CP) and steel slag (SS) to enhance the performance of concrete incorporating IOTs. The study found that the synergistic effect of CP and SS significantly improved the compressive strength of concrete, with a notable increase of up to 21% compared to concrete with IOTs alone. Mercury intrusion porosimetry (MIP) and backscattering electron (BSE) analyses revealed that the ternary SCMs significantly optimized the characteristics of the interfacial transition zone (ITZ), which in turn enhanced the compressive properties of the concrete. This contributed to maintaining the structural integrity of the concrete, even amidst variations in the pore structure. Importantly, the incorporation of ternary SCMs led to a 23% reduction in carbon emissions, from 400.01 kg CO2/m3 to 307.48 kg CO2/m3, and elevated eco-strength efficiency from 0.1 to 0.14. The study highlights the role of multi-material synergy in developing composite SCMs systems, fostering the sustainable advancement of green building materials.

Rare earth elements as tracers of iron ore tailings on the Brazilian eastern continental shelf.

Iron ore tailings are stored in large dams and pose risks to the environment around the world. In Brazil, the rupture of these dams has become frequent and has generated environmental and social concern. Rare earth elements are good tracers of sediment sources and our results indicated chronic contamination of the seabed sediment from the marine region affected by the Fundão Dam tailings since 2015, including areas of environmental protection. This research, carried out between November 2018 and September 2021, with a database of 575 samples, showed a greater amount of contaminated material in the marine region adjacent to the Doce River mouth. Although data suggest prior mining contamination of the Doce River basin, the Fundão episode was an empirical and massive example of the environmental damage caused by these human activities over the centuries, showing that the impact remains in the shallow marine environments for years. Integr Environ Assess Manag 2024;20:179-188. © 2023 SETAC.

Os rejeitos de minério de ferro são armazenados em grandes barragens que trazem riscos ao meio ambiente em todo o mundo. No Brasil, o rompimento dessas barragens tem se tornado frequente e gerado preocupação ambiental e social. Elementos terras raras são bons marcadores de fontes sedimentares e nossos resultados indicaram uma contaminação crônica da região marinha afetada pelos rejeitos da barragem de Fundão, incluindo áreas de proteção ambiental. Esta pesquisa teve com 575 amostras analisadas entre os meses de novembro de 2018 e outubro de 2021, com a região marinha adjacente a foz do Rio Doce apresentando o maior grau de impacto. Embora os dados ressaltem a contaminação histórica da mineração na bacia do Rio Doce, o episódio do Fundão foi um exemplo empírico e massivo dos danos ambientais causados por essas atividades ao longo dos séculos, mostrando que o impacto permanece nos ambientes marinhos rasos por anos. Integr Environ Assess Manag 2024;20:179-188.

Exploring Alternatives to Polyacrylamide: A Comparative Study of Novel Polymers in the Flocculation and Dewatering of Iron Ore Tailings.

Despite being widely used in tailings treatment, polyacrylamide continues to face performance challenges. In this study, two commercial polyacrylamides with different molecular weights were used to flocculate iron ore tailings and their performance was compared with two polymers designed to treat oil sand tailings: poly(vinylbenzyl)trimethylammonium chloride and partially hydrolyzed poly(methyl acrylate) grafted onto ethylene-propylene-diene copolymer backbones. The polyacrylamide with the highest molecular weight performed better than the one with the lowest molecular weight, but its efficiency was still considerably lower than what would be desired for good solid-liquid separation. The new polymer flocculants performed better than the commercially available polyacrylamides but retained high amounts of water in the sediments. This comparison shows that polymers other than polyacrylamide may be used to treat iron ore tailings.

Realizing of ZSM-5 microspheres with enhanced catalytic properties prepared from iron ore tailings via solid-phase conversion method.

The comprehensive utilization of iron ore tailings (IOTs) not only resolved environmental problems but also brought huge economic benefits. In this study, the synthetic route presented herein provides a novel method for the synthesis of ZSM-5 microspheres from IOTs. The effects of Si/Al molar ratios and the pH of the precursor solution on the formation of zeolite was evaluated by various analytical methods. The catalytic performance of the catalyst prepared by the solid-phase conversion method (denoted as MP-ZSM-5) was evaluated by methanol-to-propylene (MTP) reaction. Compared with the zeolite catalyst that synthesized via the conventional hydrothermal method (denoted as HM-ZSM-5), MP-ZSM-5 not only prolongs catalytic lifetime from 18.7 to 36.0 h but also has higher selectivity for propylene by MP-ZSM-5 (43.7%) than that for HM-ZSM-5 (38.6%). In addition, Kissinger-Akahira-Sunose (KAS) model is applied to the TG result to study the template removal process kinetics. The average activation energy values required for the removal of CTAB and TPABr are 201.11 ± 13.42 and 326.88 ± 16.91 kJ∙mol-1, respectively. Furthermore, this result is well coupled with the model-free kinetic algorithms to determine the conversion and isoconversion of the TPABr and CTAB decomposition in ZSM-5, which serves as important guidelines for the industrial production process.

Concrete Made with Iron Ore Tailings as a Fine Aggregate: A Step towards Sustainable Concrete.

The need for low-cost raw materials is driven by the fact that iron ore tailings, a prevalent kind of hazardous solid waste, have created major environmental issues. Although many studies have focused on using iron ore tailing (IOT) in concrete and have reported positive results, readers may find it difficult to accurately assess the behaviors of IOT in concrete due to the scattered nature of the information. Therefore, a comprehensive assessment of IOT in concrete is necessary. This paper thoroughly reviews the characteristics of concrete that contains IOT such as fresh properties, mechanical properties and durability at different age of curing. The outcome of this review indicates that by using IOT, concrete's mechanical properties and durability improved, but its flowability decreased. Compressive strength of concrete with 20% substitution of IOT is 14% more than reference concrete. Furthermore, up to 40% substitution of IOT produces concrete that has sufficient flowability and compactability. Scan electronic microscopy results indicate a weak interfacial transition zone (ITZ). The optimum IOT dosage is important since a greater dose may decrease the strength properties and durability owing to a lack of fluidity. Depending on the physical and chemical composition of IOT, the average value of optimum percentages ranges from 30 to 40%. The assessment also recommends areas of unsolved research for future investigations.

Preparation of Iron Ore Tailings-Based Superhydrophobic Coatings.

In this study, ball mill pretreated iron ore tailings were modified with tetraethoxysilane (TEOS) and hexadecyltrimethoxysilane (HDTMS) to obtain iron ore tailings/polysiloxane (IOT/POS) superhydrophobic powders, which were subsequently mixed with chloroprene rubber solution (CRS) to prepare durable superhydrophobic composite coatings. The effect of HDTMS amount and reaction time on the wettability of the superhydrophobic powder was investigated. The influence of the superhydrophobic powders concentration on the wettability of the composite coatings as well as the degree of damage of the superhydrophobicity of the composite coating was analyzed by using the sandpaper abrasion and tape peeling tests. Further, SEM and FTIR were used to analyze the formation mechanism of the IOT/POS superhydrophobic powders and coatings. The results showed for an HDTMS amount of 2.5 mmol and reaction time of 4 h, the contact angle of the IOT/POS powder was 157.3 ± 0.6°, whereas the slide angle was determined to be 5.9 ± 0.8°. For an IOT/POS powder content of 0.06 g/mL in CRS, the contact angle value of the superhydrophobic composite coating was 159.2 ± 0.5°, whereas the slide angle value was 5.5 ± 0.8°. The superhydrophobic composite coating still maintained the superhydrophobicity after the sandpaper abrasion and tape peeling tests, which indicated the iron ore tailings solid waste has the potential to prepare superhydrophobic coatings.

Highly active Fenton-like catalyst derived from solid waste-iron ore tailings using wheat straw pyrolysis.

The pollutants degradation rate of iron ore tailings-based heterogeneous catalysts is the main factor limiting its application. Herein, an iron ore tailings-based Fenton-like catalyst (I/W(3:1)-900-60) with a relatively fast catalysis rate was constructed by co-pyrolysis (900°C, 60 min holding time) of iron ore tailings and wheat straw with a mass ratio of 3:1. With wheat straw blending, the generated I/W(3:1)-900-60 presented a larger surface area (24.53 m2/g), smaller pore size (3.76 nm), reduced iron species (Fe2+ from magnetic), and a higher catalytic activity (0.0229 min-1) than I-900-60 (1.32 m2/g, 12.87 nm, 0.012 min-1) pyrolyzed using single iron ore tailing under the same pyrolysis conditions. In addition, biochar and iron ore tailings in I/W(3:1)-900-60 were tightly combined through chemical bonding. The optimal catalyst remains active after three cycles, indicating its catalytic stability and recyclability. The good Fenton-like methylene blue degradation efficiency of I/W(3:1)-900-60 was ascribed to the sacrificial role of biochar, as well as the electron transfer between biochar and iron active sites or the redox cycles of ≡Fe3+/Fe2+. This finding provides a facile construction strategy for highly active iron ore tailings-based Fenton-like catalyst and thereby had a great potential application in wastewater treatment.