Pulsed Laser Manufactured Heteroatom Doped Carbon Dots via Heterocyclic Aromatic Hydrocarbons for Improved Tribology Performance.

Traditional laser-assisted method (top-down synthesis strategy) is applied in the preparation of carbon dots (CDs) by cutting larger carbon materials, which requires harsh conditions, and the size distribution of the CDs is seldom monodisperse. In this work, heteroatom-doped CDs, represented by N,S co-doped CDs (N,S-CDs), can be prepared successfully by pulsed laser irradiation of heterocyclic aromatic hydrocarbons-based small molecule compound solution. The friction coefficient (COF) of base oil PAO decreases from 0.650 to 0.093, and the wear volume reduces by 92.0% accompanied by 1 wt.% N,S-CDs addition, while the load-bearing capacity is improved from 100 to 950 N. The excellent lubrication performance is mainly attributed to the formation of a robust tribofilm via a tribochemical reaction between N,S-CDs and friction pairs, and the N,S-CDs can play a mending effect and polishing effect for worn surfaces. Furthermore, the lubricant containing heteroatom doped CDs are capable of being prepared in situ via pulsed laser irradiation of heterocyclic aromatic hydrocarbons in base oil, which can avoid the redispersed problem of nano-additive in base oil to maintain long-term dispersion, with COF of 0.103 and low wear volume ≈1.99 × 105 µm3 (76.9% reduction) even after standing for 9 months.

Deciphering Indirect Nitrite Reduction to Ammonia in High-Entropy Electrocatalysts Using In Situ Raman and X-ray Absorption Spectroscopies.

This research adopts a new method combining calcination and pulsed laser irradiation in liquids to induce a controlled phase transformation of Fe, Co, Ni, Cu, and Mn transition-metal-based high-entropy Prussian blue analogs into single-phase spinel high-entropy oxide and face-centered cubic high-entropy alloy (HEA). The synthesized HEA, characterized by its highly conductive nature and reactive surface, demonstrates exceptional performance in capturing low-level nitrite (NO2 -) in an electrolyte, which leads to its efficient conversion into ammonium (NH4 +) with a Faradaic efficiency of 79.77% and N selectivity of 61.49% at -0.8 V versus Ag/AgCl. In addition, the HEA exhibits remarkable durability in the continuous nitrite reduction reaction (NO2 -RR), converting 79.35% of the initial NO2 - into NH4 + with an impressive yield of 1101.48 µm h-1 cm-2. By employing advanced X-ray absorption and in situ electrochemical Raman techniques, this study provides insights into the indirect NO2 -RR, highlighting the versatility and efficacy of HEA in sustainable electrochemical applications.

Three-dimensional-printed MPBI@ß-TCP scaffold promotes bone regeneration and impedes osteosarcoma under near-infrared laser irradiation.

Beta-tricalcium phosphate (ß-TCP) is considered as one of the most promising biomaterials for bone reconstruction. This study generated a functional molybdenum disulfide (MoS2 )/polydopamine (PDA)/-bone morphogenetic protein 2 (BMP2)-insulin-like growth factor-1 (IGF-1) coating on the ß-TCP scaffold and analyzed the outcomes. The MoS2 /PDA-BMP2-IGF-1@ß-TCP (MPBI@ß-TCP) scaffold was prepared by 3D printing and physical adsorption, followed by characterization to validate its successful construction. The in vitro osteogenic effect of the MPBI@ß-TCP scaffold was evaluated. It was found that MPBI@ß-TCP augmented the adhesion, diffusion and proliferation of mesenchymal stem cells (MSCs). The alkaline phosphatase (ALP) activity, collagen secretion and extracellular matrix (ECM) mineralization along with the expression of Runx2, ALP and OCN were also enhanced in the presence of MPBI@ß-TCP. Additionally, MPBI@ß-TCP stimulated endothelial cells to secrete VEGF and promoted capillary-like tubule formation. We then confirmed the biocompatibility of MPBI@ß-TCP to macrophages and its anti-inflammatory effects. Furthermore, under near-infrared (NIR) laser irradiation, MPBI@ß-TCP produced photothermal effect to not only kill MG-63 osteosarcoma cells, but also enhance bone regeneration in vivo with biosafety. Overall, this work demonstrates that 3D-printed MPBI@ß-TCP with enhanced osteogenic activity under NIR laser irradiation has a vast potential in the field of tissue defects.

Effects of Nd:YAG laser irradiation at different energy densities on dentin bond durability under simulated pulpal pressure.

OBJECTIVES: To evaluate the effects of Nd:YAG laser irradiation on the microstructures of dentin surfaces and the long-term bond strength of dentin under simulated pulpal pressure. MATERIALS AND METHODS: Under simulated pulp pressure, 30 freshly extracted caries-free third molars were cut into 2-mm-thick dentin samples and then divided into five groups: the control and laser groups (93.3 J/cm2; 124.4 J/cm2; 155.5 J/cm2; 186.6 J/cm2). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and Vickers hardness were used to analyze the surface morphology, composition, and mechanical properties of the dentin before and after laser irradiation. Another 80 caries-free third molars were removed and treated as described above, and the resin was bonded to the dentin surface with Single Bond Universal (SBU) adhesive in self-etch mode to make stick specimens. Microtensile bond strength (µTBS), confocal laser scanning microscopy (CLSM), and interfacial silver nanoleakage tests before and after 10,000 times thermocycling were then performed to analyze the bonding properties and interfacial durability of each group. RESULTS: SEM observations revealed that the surfaces of all laser group specimens were rough with open dentin tubules. Laser irradiation altered the surface composition of dentin while removing some collagen fibers but did not affect its surface hardness or crystallographic characteristics. Furthermore, laser irradiation with an energy density of 124.4 J/cm2 significantly promoted the immediate and aging bond strengths and reduced nanoleakage compared to those of the control group. CONCLUSIONS: Under simulated pulp pressure, Nd:YAG laser pretreatment altered the chemical composition of dentin and improved the immediate and long-term bond strength. CLINICAL RELEVANCE: This study investigated the optimal parameters for Nd:YAG laser pretreatment of dentin, which has potential as a clinical method to strengthen bonding.

Temporal and Spatial Distribution Characteristics of Crosstalk Lines Generated by Irradiating Progressive Scan Charge-Coupled Device Camera with Continuous Laser.

To study the interference effect of the laser in motion mode on a CCD, the continuous laser with the wavelength of 532 nm at different motion speeds was used to scan the CCD. The experimental results show that the crosstalk phenomenon produced by static and dynamic irradiation is significantly different. When the continuous laser statically radiates the CCD, the vertical crosstalk line is observed in the output image. The gray values of the crosstalk line are divided into two stages, with the increase of the laser fluence: linear increase and saturation, which correspond to different formation mechanisms of the crosstalk lines, respectively. In addition, when the irradiation duration of the static laser is less than the integration time of CCD, the effect of delay time on the spatial distribution of the crosstalk line is identified. In addition, when the laser irradiates the CCD at different scanning speeds, crosstalk lines with certain slopes are observed. The slope of the crosstalk line is determined by the scanning speed of the continuous laser and the integration time of the CCD. The results show that the delay time and the irradiation position have important effects on the spatial distribution of the laser spot and crosstalk lines.

All-Electrical 9-Bit Skyrmion-Based Racetrack Memory Designed with Laser Irradiation.

Racetrack memories with magnetic skyrmions have recently been proposed as a promising storage technology. To be appealing, several challenges must still be faced for the deterministic generation of skyrmions, their high-fidelity transfer, and accurate reading. Here, we realize the first proof-of-concept of a 9-bit skyrmion racetrack memory with all-electrical controllable functionalities implemented in the same device. The key ingredient is the generation of a tailored nonuniform distribution of magnetic anisotropy via laser irradiation in order to (i) create a well-defined skyrmion nucleation center, (ii) define the memory cells hosting the information coded as the presence/absence of skyrmions, and (iii) improve the signal-to-noise ratio of anomalous Hall resistance measurements. This work introduces a strategy to unify previous findings and predictions for the development of a generation of racetrack memories with robust control of skyrmion nucleation and position, as well as effective skyrmion electrical detection.

Nanoprocessing of Self-Suspended Monolayer Graphene and Defect Formation by Femtosecond-Laser Irradiation.

We demonstrate the femtosecond-laser processing of self-suspended monolayer graphene grown by chemical vapor deposition, resulting in multipoint drilling with holes having a diameter of <100 nm. Scanning transmission electron microscopy revealed the formation of many nanopores on the laser-irradiated graphene. Furthermore, atomic-level defects as well as nanopores were found in the graphene membrane by high-resolution transmission electron microscopy, while the overall crystal structure remained intact. Raman spectroscopy showed an increase in the defect density with an increase in the number of laser shots, suggesting that the nanopore formation triggered the creation of the <100 nm holes. The approach presented herein can offer an experimental insight into the simulation of atomic dynamics in graphene under femtosecond-laser irradiation. The thorough examination of the atomic defect formation and secondary effect of surface cleaning observed in this study would help develop engineering methods for graphene and other two-dimensional materials in the future.

Tunable Topological States in Stacked Chern Insulator Bilayers.

The emergence of intrinsic quantum anomalous Hall (QAH) insulators with a long-range ferromagnetic (FM) order triggers unprecedented prosperity for combining topology and magnetism in low dimensions. Built upon atom-thin Chern insulator monolayer MnBr3, we propose that the topologically nontrivial electronic states can be systematically tuned by inherent magnetic orders and external electric/optical fields in stacked Chern insulator bilayers. The FM bilayer illustrates a high-Chern-number QAH state characterized by both quantized Hall plateaus and specific magneto-optical Kerr angles. In antiferromagnetic bilayers, Berry curvature singularity induced by electrostatic fields or lasers emerges, which further leads to a novel implementation of the layer Hall effect depending on the chirality of irradiated circularly polarized light. These results demonstrate that abundant tunable topological properties can be achieved in stacked Chern insulator bilayers, thereby suggesting a universal routine to modulate d-orbital-dominated topological Dirac fermions.

In Situ Imaging of an Anisotropic Layer-by-Layer Phase Transition in Few-Layer MoTe2.

Understanding the phase transition mechanisms in two-dimensional (2D) materials is a key to precisely tailor their properties at the nanoscale. Molybdenum ditelluride (MoTe2) exhibits multiple phases at room temperature, making it a promising candidate for phase-change applications. Here, we fabricate lateral 2H-Td interfaces with laser irradiation and probe their phase transitions from micro- to atomic scales with in situ heating in the transmission electron microscope (TEM). By encapsulating the MoTe2 with graphene protection layers, we create an in situ reaction cell compatible with atomic resolution imaging. We find that the Td-to-2H phase transition initiates at phase boundaries at low temperatures (200-225 °C) and propagates anisotropically along the b-axis in a layer-by-layer fashion. We also demonstrate a fully reversible 2H-Td-2H phase transition cycle, which generates a coherent 2H lattice containing inversion domain boundaries. Our results provide insights on fabricating 2D heterophase devices with atomically sharp and coherent interfaces.

Coupled thermo-mechanical interaction on a multi-layered skin tissue with temperature-dependent physical properties irradiated by a pulse laser.

A detailed understanding of the coupled thermo-mechanical interaction on the biological tissue irradiated by a pulse laser is essential for the existed therapeutic methods constructed on the photo-thermal effect, which will contribute to the design, characterization and optimization of strategies for delivering better treatment. The aim of present work is to explore the coupled thermo-mechanical behavior of a multi-layered skin tissue with temperature-dependent physical properties under the pulsed laser irradiation. A layered theoretical model involved variable physical parameters with temperature has been proposed firstly according to the generalized theory of thermo-elasticity with dual-phase lag mechanism. The numerical method based on an explicit finite difference scheme is then employed to predict the temporal and spatial distributions of the temperature, thermal deformation and stresses experienced to a short-pulse laser irradiation. On this basis, the effect of variable thermal and mechanical physical parameters of skin tissue on the coupled thermo-mechanical behavior and relative thermal damage has been evaluated.

Highly Selective Pd Nanosheet Aerogel Catalyst with Hybrid Strain Induced by Laser Irradiation and P Doping Postprocess.

Strain engineering of electrocatalysts provides an effective strategy to improve the intrinsic catalytic activity. Here, the defect-rich crystalline/amorphous Pd nanosheet aerogel with hybrid microstrain and lattice strain is synthesized by combining laser irradiation and phosphorus doping methods. The surface strain exhibited by the microstrain and lattice strain shifts the d-band center of the electrocatalyst, enhancing the adsorption of intermediates in the ethanol oxidation reaction and thus improving the catalytic performances. The measured mass activity, specific activity and C1-path selectivity of the Pd nanosheet aerogel are 4.48, 3.06, and 5.06 times higher than those of commercial Pd/C, respectively. These findings afford a new strategy for the preparation of highl activity and C1 pathway selective catalysts and provide insight into the catalytic mechanism of strain-rich heterojunction materials based on tunable surface strain values.

Metabolic phenotype analysis of Trichophyton rubrum after laser irradiation.

BACKGROUND: Biological phenotypes are important characteristics of microorganisms, and often reflect their genotype and genotype changes. Traditionally, Trichophyton rubrum (T. rubrum) phenotypes were detected using carbon source assimilation tests, during which the types of tested substances are limited. In addition, the operation is complicated, and only one substance can be tested at once. To observe the changes of the metabolic phenotype of T. rubrum after laser irradiation, a high-throughput phenotype microarray system was used to analyze the metabolism of different carbon, nitrogen, phosphorus and sulfur source substrates in a Biolog metabolic phenotyping system. RESULTS: The strain of T. rubrum used in this study can effectively utilize 33 carbon, 20 nitrogen, 16 phosphorus, and 13 sulfur source substrates prior to laser irradiation. After laser irradiation, the strain was able to utilize 10 carbon, 12 nitrogen, 12 phosphorus, and 8 sulfur source substrates. The degree of utilization was significantly decreased compared with the control. Both groups efficiently utilized saccharides and organic acids as carbon sources as well as some amino acids as nitrogen sources for growth. The number of substrates utilized by T. rubrum after laser irradiation were significantly reduced, especially carbon substrates. Some substrates utilization degree in the laser treated group was higher than control, such as D-glucosamine, L-glutamine, D-2-Phospho-Glyceric Acid, D-glucosamine-6-phosphate, and D-methionine. CONCLUSION: Laser irradiation of T. rubrum may lead to changes in the metabolic substrate and metabolic pathway, thus weakening the activity of the strain.

Investigations of the Photothermal Properties of a Series of Molecular Gold-bis(dithiolene) Complexes Absorbing in the NIR-III Region.

The photothermal properties of a series of neutral radical gold-bis(dithiolene) complexes absorbing in the near-infrared-III window (1550-1870 nm) have been investigated. This class of complexes was found to be good photothermal agents (PTAs) in toluene under 1600 nm laser irradiation with photothermal efficiencies around 40 and 60 % depending on the nature of the dithiolene ligand. To the best of our knowledge, these complexes are the first small molecular photothermal agents to absorb so far into the near infrared. To test their applicability in water, these hydrophobic complexes have been encapsulated into nanoparticles constituted by amphiphilic block-copolymers. Stable suspensions of polymeric nanoparticles (NPs) encapsulating the gold-bis(dithiolene) complexes have been prepared which show a diameter around 100 nm. The encapsulation rate was found to be strongly dependent on the nature of the dithiolene ligands. The photothermal properties of the aqueous suspensions containing gold-bis(dithiolene) complexes were then studied under 1600 nm laser irradiation. These studies demonstrate that water has strong photothermal activity in the NIR-III region that, cannot be overcome even with the addition of gold complexes displaying good photothermal properties.

Effect of dual sintering with laser irradiation and thermal treatment on printed copper nanoparticle patterns.

The dual sintering of copper (Cu) nanoparticles (NPs) was introduced to produce conductive patterns suitable for flexible electronics applications. In this method, laser irradiation using a Nd:YAG laser with a wavelength of 1064 nm was performed at laser powers of 400, 600 and 800 mJ. The laser irradiation time was 15 and 30 s for each laser power. After laser irradiation, all of the Cu NP patterns were thermally sintered under formic acid vapors. The temperature and time for thermal treatment were selected as 260 °C and 15 min, respectively. The resultant physical, chemical, electrical and mechanical properties were evaluated and compared considering the six different dual sintering conditions. The Cu NP patterns sintered using 800 mJ for 30 s showed increased necking and coalescence compared to the other patterns and featured a microstructure with increased density. Despite being oxidized, the Cu NP patterns sintered with 800 mJ for 30 s showed the lowest electrical resistivity of 11.25µΩ cm. The surface of every sintered Cu pattern was oxidized, and mechanical hardness increased with increasing laser power. The Cu NP pattern sintered with 800 mJ for 30 s demonstrated the highest hardness of 48.64 N mm-2. After sintering using the six different conditions, the Cu NP patterns exhibited a weight loss of 0.02-3.87 wt%, and their roughness varied in the range of 26.15-74.08 nm. This can be attributed to the effective removal of organic residues and the degree of particle agglomeration. After performing folding tests up to 50 cycles, Cu NP patterns showed an upward trend in resistance with increasing laser power and time. The highest and lowest resistance ratios were observed as 3.97 and 17.24 for the patterns sintered at 400 mJ for 15 s and 800 mJ for 30 s, respectively.

Femtosecond laser irradiation as a novel method for nanosheet growth and defect generation in g-C3N4.

Among the many recently developed photo-catalytic materials, graphitic carbon nitride (g-C3N4) shows great promise as a catalytic material for water splitting, hydrogen generation, and related catalytic applications. Herein, synthesized bulk g-C3N4is simply irradiated under a 35 fs pulse at mixed photon energies (800 nm and its second harmonic). g-C3N4was synthesized from melamine following a facile thermal polymerization procedure. The prepared material was introduced, in an aqueous environment, to the femtosecond laser for various lengths of time. The treated material demonstrates a significant increase in surface area, relative to the untreated samples, indicating that irradiation is a successful method for exfoliation. The subsequent characterization reveals that the mixed irradiation process drives significant defect generation and sheet growth, which is not seen under 800 nm irradiation. Extended mixed irradiation results in 4 nm thick nanosheets with lateral dimensions 4× that of the bulk material. The treated material shows improved dye absorption/removal. This novel method of defect generation and nanosheet growth shows great potential as a g-C3N4pre-treatment method for co-catalytic applications. Herein it is shown that femtosecond laser irradiation drives exfoliation beyond 100 nm particle sizes, and sheet-like morphologies under extended irradiation, which must be taken into account when using this method to improve material performance.

Nanoarchitecture-based photothermal ablation of cancer: A systematic review.

Photothermal therapy (PTT) is an emerging non-invasive method used in cancer treatment. In PTT, near-infrared laser light is absorbed by a chromophore and converted into heat within the tumor tissue. PTT for cancer usually combines a variety of interactive plasmonic nanomaterials with laser irradiation. PTT enjoys PT agents with high conversion efficiency to convert light into heat to destroy malignant tissue. In this review, published studies concerned with the use of nanoparticles (NPs) in PTT were collected by a systematic and comprehensive search of PubMed, Cochrane, Embase, and Scopus databases. Gold, silver and iron NPs were the most frequent choice in PTT. The use of surface modified NPs allowed selective delivery and led to a precise controlled increase in the local temperature. The presence of NPs during PTT can increase the reactive generation of oxygen species, damage the DNA and mitochondria, leading to cancer cell death mainly via apoptosis. Many studies recently used core-shell metal NPs, and the effects of the polymer coating or ligands targeted to specific cellular receptors in order to increase PTT efficiency were often reported. The effective parameters (NP type, size, concentration, coated polymers or attached ligands, exposure conditions, cell line or type, and cell death mechanisms) were investigated individually. With the advances in chemical synthesis technology, NPs with different shapes, sizes, and coatings can be prepared with desirable properties, to achieve multimodal cancer treatment with precision and specificity.

Theoretical and experimental study on the photothermal effect of palladium nanoparticles based on a finite element model.

Palladium nanoparticles (Pd NPs) show significant promise as agents for the photothermal treatment of tumors due to their high photothermal conversion efficiency and thermal stability. theoretical calculations were conducted to investigate the electric field and solid heat conduction of Pd NPs with various sizes and particle distances, aiming to achieve the maximum photothermal conversion efficiency during laser irradiation. Subsequently, Pd NPs with optimal size and structure were synthesized. In vitro and in vivo experiments were conducted to evaluate photothermal conversion. The theoretical results indicated that a peak temperature of 90.12 °C is achieved when the side length is 30 nm with a distance of 2 nm. In vitro experiments demonstrated that the photothermal conversion efficiency of Pd NPs can reach up to 61.9%. in vivo experiments revealed that injecting Pd NPs into blood vessels can effectively reduce the number of laser pulses by 22.22%, thereby inducing obvious vasoconstriction.

Effects of the invasive and non-invasive systemic photobiomodulation using low-level laser in experimental models: A systematic review.

Systemic photobiomodulation (PBM) of the blood or over blood vessels has been associated with bio-stimulating, vasodilating, and anti-inflammatory properties. This treatment modality has been used for modulating inflammatory processes, tissue repair, atherosclerosis, and systemic arterial hypertension, and is described more often in clinical studies than experimental models. Therefore, the aim of the present study was to conduct a literature review regarding the effect of systemic PBM involving the intravascular laser irradiation of blood (ILIB) or non-invasive vascular photobiomodulation (VPBM) using low-level laser (LLL) in experimental (animal) models. The PubMed/MEDLINE®, Scopus, SPIE Digital Library, and Web of Science databases were searched for articles on the use of VPBM with LLL in animal models. Nine original articles met the inclusion criteria and were critically evaluated. The variables of interest were the dosimetric laser parameters, different methods for delivering energy, and the main results. The use laser in the red spectrum was more prevalent and VPBM (non-invasive) predominated over ILIB (invasive). No standardization was found in the dosimetric parameters. However, the studies showed the positive effects of VPBM on arterial pressure and blood circulation, the positive effects of ILIB on blood composition and hematological markers, as well as positive effects of both forms of systemic PBM (ILIB and VPBM) on the tissue repair process. In conclusion, the studies evaluated in the present review showed that the use of systemic PBM with ILIB or non-invasive VPBM induced positive effects, modulating metabolic conditions and tissue repair. However, there is a need for standardization in the dosimetric parameters for the different conditions and processes evaluated using experimental models.

Effects of intravascular photobiomodulation on cognitive impairment and crossed cerebellar diaschisis in patients with traumatic brain injury: a longitudinal study.

The association between intravascular photobiomodulation (iPBM) and crossed cerebellar diaschisis (CCD) and cognitive dysfunction in patients with traumatic brain injury (TBI) remains unknown. We postulate that iPBM might enable greater neurologic improvements. The objective of this study was to evaluate the clinical impact of iPBM on the prognosis of patients with TBI. In this longitudinal study, patients who were diagnosed with TBI were recruited. CCD was identified from brain perfusion images when the uptake difference of both cerebella was > 20%. Thus, two groups were identified: CCD( +) and CCD( -). All patients received general traditional physical therapy and three courses of iPBM (helium-neon laser illuminator, 632.8 nm). Treatment assemblies were conducted on weekdays for 2 consecutive weeks as a solitary treatment course. Three courses of iPBM were performed over 2-3 months, with 1-3 weeks of rest between each course. The outcomes were measured using the Rancho Los Amigos Levels of Cognitive Functioning (LCF) tool. The chi-square test was used to compare categorical variables. Generalized estimating equations were used to verify the associations of various effects between the two groups. p < 0.05 indicated a statistically significant difference. Thirty patients were included and classified into the CCD( +) and CCD( -) groups (n = 15, each group). Statistics showed that before iPBM, CCD in the CCD( +) group was 2.74 (exp 1.0081) times higher than that of CCD( -) group (p = 0.1632). After iPBM, the CCD was 0.64 (exp-0.4436) times lower in the CCD( +) group than in the CCD( -) group (p < 0.0001). Cognitive assessment revealed that, before iPBM, the CCD( +) group had a non-significantly 0.1030 lower LCF score than that of CCD( -) group (p = 0.1632). Similarly, the CCD( +) group had a non-significantly 0.0013 higher score than that of CCD( -) after iPBM treatment (p = 0.7041), indicating no significant differences between the CCD( +) or CCD( -) following iPBM and general physical therapy. CCD was less likely to appear in iPBM-treated patients. Additionally, iPBM was not associated with LCF score. Administration of iPBM could be applied in TBI patients to reduce the occurrence of CCD. The study failed to show differences in cognitive function after iPBM, which still serves as an alternative non-pharmacological intervention.

Systemic inflammatory markers following adjunctive Nd:YAG (1064 nm) laser irradiation to step 2 of periodontal therapy: a 12-month, randomized, controlled trial.

OBJECTIVES: The aim of this study was to investigate whether the use of adjunctive Nd:YAG (1064 nm) laser irradiation to full-mouth scaling and root planing (FM-SRP) may offer additional benefit in the systemic inflammatory status of the patient, as depicted in a variety of systemic biomarkers over FM-SRP alone, up to 12 months after treatment. MATERIALS AND METHODS: A total of 60 otherwise healthy stage III/IV periodontal patients were equally distributed in 3 groups. The control group received FM-SRP. In laser A group, 1 week after FM-SRP, Nd:YAG laser irradiation was delivered in periodontal pockets with PD ≥ 4 mm using specific settings (3 W, 150 mJ, 20 Hz, 100 µs). In laser B group Nd:YAG laser irradiation was delivered twice, 1 week after FM-SRP and 1 week later with different settings compared to laser A (2 W, 200 mJ, 10 Hz, 100 µs). RESULTS: A significant reduction (p = 0.038) of IL-1ß serum levels at the 6-month time point was observed for laser A group. IL-6 was found statistically significantly increased (p = 0.011) in the control group at the 6-week time point, whereas no difference was reported for the laser-treated groups (laser A, laser B). CONCLUSIONS: The adjunctive use of Nd:YAG laser irradiation, prevented from IL-6 increase after FM-SRP, 6 weeks after treatment. Similarly, Nd:YAG laser irradiation (3 W, 150 mJ, 20 Hz,100 µs) was associated with significantly lower IL-1ß levels, 6 months post-operatively. CLINICAL RELEVANCE: Additional Nd:YAG laser application to FM-SRP may provide a potential beneficial effect on systemic inflammation. TRIAL REGISTRATION NUMBER: ISRCTN26692900. REGISTRATION DATE: 09/06/2022.