Magnetic-Based Human Tissue 3D Cell Culture: A Systematic Review.

Cell-based assays, conducted on monolayer (2D) cultured cells, are an unquestionably valuable tool for biomedical research. However, three-dimensional (3D) cell culture models have gained relevance over the last few years due to the advantages of better mimicking the microenvironment and tissue microarchitecture in vivo. Recent magnetic-based 3D (m3D) cell culture systems can be used for this purpose. These systems are based on exposing magnetized cells to magnetic fields by levitation, bioprinting, or ring formation to promote cell aggregation into 3D structures. However, the successful development of these structures is dependent on several methodological characteristics and can be applied to mimic different human tissues. Thus, a systematic review was performed using Medline (via Pubmed), Scopus, and Web of Science (until February 2022) databases to aggregate studies using m3D culture in which human tissues were mimicked. The search generated 3784 records, of which 25 met the inclusion criteria. The usability of these m3D systems for the development of homotypic or heterotypic spheroids with or without scaffolds was explored in these studies. We also explore methodological differences specifically related to the magnetic method. Generally, the development of m3D cultures has been increasing, with bioprinting and levitation systems being the most used to generate homotypic or heterotypic cultures, mainly to mimic the physiology of human tissues, but also to perform therapeutic screening. This systematic review showed that there are areas of research where the application of this method remains barely explored, such as cancer research.

Enhancing scaffold-free spheroid models: 3D cell bioprinting method for metastatic HSC3-Oral squamous carcinoma cell line.

3D in vitro systems offer advantages over the shortcomings of two-dimensional models by simulating the morphological and functional features of in vivo-like environments, such as cell-cell and cell-extracellular matrix interactions, as well as the co-culture of different cell types. Nevertheless, these systems present technical challenges that limit their potential in cancer research requiring cell line- and culture-dependent standardization. This protocol details the use of a magnetic 3D bioprinting method and other associated techniques (cytotoxicity assay and histological analysis) using oral squamous cell carcinoma cell line, HSC3, which offer advantages compared to existing widely used approaches. This protocol is particularly timely, as it validates magnetic bioprinting as a method for the rapid deployment of 3D cultures as a tool for compound screening and development of heterotypic cultures such as co-culture of oral squamous cell carcinoma cells with cancer-associated fibroblasts (HSC3/CAFs).

Advances in the application of iron oxide nanoparticles (IONs and SPIONs) in three-dimensional cell culture systems.

BACKGROUND: The field of tissue engineering has remarkably progressed through the integration of nanotechnology and the widespread use of magnetic nanoparticles. These nanoparticles have resulted in innovative methods for three-dimensional (3D) cell culture platforms, including the generation of spheroids, organoids, and tissue-mimetic cultures, where they play a pivotal role. Notably, iron oxide nanoparticles and superparamagnetic iron oxide nanoparticles have emerged as indispensable tools for non-contact manipulation of cells within these 3D environments. The variety and modification of the physical and chemical properties of magnetic nanoparticles have profound impacts on cellular mechanisms, metabolic processes, and overall biological function. This review article focuses on the applications of magnetic nanoparticles, elucidating their advantages and potential pitfalls when integrated into 3D cell culture systems. This review aims to shed light on the transformative potential of magnetic nanoparticles in terms of tissue engineering and their capacity to improve the cultivation and manipulation of cells in 3D environments.

Protocol for 3D screening of lung cancer spheroids using natural products.

Non-small cell lung cancer (NSCLC) is the most common type of lung cancer and accounts for ∼84% of all lung cancer cases. NSCLC remains one of the leading causes of cancer-associated death, with a 5-year survival rate less than 25%. This type of cancer begins with healthy cells that change and start growing out of control, leading to the formation of lesions or tumors. Understanding the dynamics of how the tumor microenvironment promotes cancer initiation and progression that leads to cancer metastasis is crucial to help identify new molecular therapies. 3D primary cell tumor models have received renewed recognition due to their ability to better mimic the complexity of in vivo tumors and as a potential bridge between traditional 2D culture and in vivo studies. Vast improvements in 3D cell culture technologies make them much more cost effective and efficient largely because of the use of a cell-repellent surfaces and a novel angle plate adaptor technology. To exploit this technology, we accessed the Natural Products Library (NPL) at UF Scripps, which consists of crude extracts, partially purified fractions, and pure natural products (NPs). NPs generally are not very well represented in most drug discovery libraries and thus provide new insights to discover leads that could potentially emerge as novel molecular therapies. Herein we describe how we combined these technologies for 3D screening in 1536 well format using a panel of ten NSCLC cells lines (5 wild type and 5 mutant) against ∼1280 selected members of the NPL. After further evaluation, the selected active hits were prioritized to be screened against all 10 NSCLC cell lines as concentration response curves to determine the efficacy and selectivity of the compounds between wild type and mutant 3D cell models. Here, we demonstrate the methods needed for automated 3D screening using microbial NPs, exemplified by crude extracts, partially purified fractions, and pure NPs, that may lead to future use targeting human cancer.

Lead identification using 3D models of pancreatic cancer.

Recent technological advances have enabled 3D tissue culture models for fast and affordable HTS. We are no longer bound to 2D models for anti-cancer agent discovery, and it is clear that 3D tumor models provide more predictive data for translation of preclinical studies. In a previous study, we validated a microplate 3D spheroid-based technology for its compatibility with HTS automation. Small-scale screens using approved drugs have demonstrated that drug responses tend to differ between 2D and 3D cancer cell proliferation models. Here, we applied this 3D technology to the first ever large-scale screening effort completing HTS on over 150K molecules against primary pancreatic cancer cells. It is the first demonstration that a screening campaign of this magnitude using clinically relevant, ex-vivo 3D pancreatic tumor models established directly from biopsy, can be readily achieved in a fashion like traditional drug screen using 2D cell models. We identified four unique series of compounds with sub micromolar and even low nanomolar potency against a panel of patient derived pancreatic organoids. We also applied the 3D technology to test lead efficacy in autologous cancer associated fibroblasts and found a favorable profile for better efficacy in the cancer over wild type primary cells, an important milestone towards better leads. Importantly, the initial leads have been further validated in across multiple institutes with concordant outcomes. The work presented here represents the genesis of new small molecule leads found using 3D models of primary pancreas tumor cells.

Magnetic nanoparticles coated with carbohydrates for 3D culture of bacteria.

Magnetic nanoparticles (MNPs) are a specific type of nanomaterial whose applications are widespread into several fields including biomedicine as a smart drug targeter and environmental engineering due to their interactions with contaminants. Lately, the use of MNPs has also been demonstrated in structuring three-dimensional (3D) cultures of mammalian cells. However, MNPs application to other cell types is still limited. In this sense, some planktonic microorganisms when adhered to surfaces perform the swarming phenomenon to guarantee the expansion of the colony and to guarantee more niches. Therefore, the aim of this study was to produce MNPs coated with four carbohydrates (galactose - gal, glucose - glu, sucrose - suc, and maltose - mal) aiming microorganism culture applications and also for possible 3D arrays. The results showed that carbohydrate-coated MNPs showed hydrodynamic diameters ranging from 100 to 200 nm and that their coatings influenced the chemical behavior in different ways. Indeed, when subjected to biological tests to determine their potential level of cytotoxicity, it was found that in concentrations of 1 mM, 800, 600, and 400 µM (iron equivalent), there was not any alteration on growth of model microorganisms when visually evaluated. Besides, magnetization of bacteria was promoted in different ways as well as the modulation of swarming formation in Escherichia coli when exposed to MNP-Glu. In sum, MNPs coated with carbohydrates and even uncoated were atoxic to bacteria and one of them was able to modulate E. coli swarming formation showing the potential for applications in 3D cultures of bacteria.

Automating a Magnetic 3D Spheroid Model Technology for High-Throughput Screening.

Affordable and physiologically relevant three-dimensional (3D) cell-based assays used in high-throughput screening (HTS) are on the rise in early drug discovery. These technologies have been aided by the recent adaptation of novel microplate treatments and spheroid culturing techniques. One such technology involves the use of nanoparticle (NanoShuttle-PL) labeled cells and custom magnetic drives to assist in cell aggregation to ensure rapid 3D structure formation after the cells have been dispensed into microtiter plates. Transitioning this technology from a low-throughput manual benchtop application, as previously published by our lab, into a robotically enabled format achieves orders of magnitude greater throughput but required the development of specialized support hardware. This effort included in-house development, fabrication, and testing of ancillary devices that assist robotic handing and high-precision placement of microtiter plates into an incubator embedded with magnetic drives. Utilizing a "rapid prototyping" approach facilitated by cloud-based computer-aided design software, we built the necessary components using hobby-grade 3D printers with turnaround times that rival those of traditional manufacturing/development practices at a substantially reduced cost. This approach culminated in a first-in-class HTS-compatible 3D system in which we have coupled 3D bioprinting to a fully automated HTS robotic platform utilizing our novel magnetic incubator shelf assemblies.