Green synthesis of magnetic azo-linked porous organic polymers with recyclable properties for enhanced Bisphenol-A adsorption from aqueous solutions.

Porous organic polymers (POPs) present superior adsorption performance to steroid endocrine disruptors. However, the effective recovery and high cost have been a big limitation for their large-scale applications. Herein, magnetic azo-linked porous polymers (Fe3O4@SiO2/ALP-p) were designed and prepared in a green synthesis approach using low-price materials from phloroglucinol and pararosaniline via a diazo-coupling reaction under standard temperature and pressure conditions, which embedded with Fe3O4@SiO2 nanoparticles to form three-dimensional interlayer network structure with flexible-rigid interweaving. The saturated adsorption capacity to bisphenol-A (BPA) was 485.09 mg/g at 298 K, which increased by 1.4 times compared with ALP-p of relatively smaller mass density. This enhanced adsorption was ascribed to increment from surface adsorption and pore filling with 2.3 times of specific surface area and 2.6 times of pore volume, although the total organic functional groups decreased with Fe3O4@SiO2 amendment. Also, the adsorption rate increased by about 1.1 and 1.5-fold due to enhancement in the initial stage of surface adsorption and subsequent stage pore diffusion, respectively. Moreover, this adsorbent could be used in broad pH (3.0-7.0) and salinity adaptability (<0.5 mol/L). The loss of adsorption capacity and magnetic recovery were lower than 1.1% and 0.8% in each operation cycle because of the flexible-rigid interweave. This excellent performance was contributed by synergistic effects from physisorption and chemisorption, such as pore filling, electrostatic attraction, π-π stacking, hydrogen bonding, and hydrophobic interaction. This study offered a cost-effective, high-performing, and ecologically friendly material along with a green preparation method.

Co-doped Fe3O4/α-FeOOH for highly efficient peroxymonosulfate activation to degrade trimethoprim: Occurrence of hybrid non-radical and radical pathways.

Trimethoprim (TMP), as a widely used chemotherapeutic antibiotic agent, has caused potential risks to the aquatic environment. In this study, magnetic Co-doped Fe3O4/α-FeOOH was fabricated by a facile one-step ageing method and used for activation of peroxymonosulfate (PMS) in TMP degradation. It was found that low catalyst (0.5 g/L) and PMS addition (0.2 mM) led to the high degradation efficiency of TMP (97.2%, kobs = 0.11211 min-1) over a wide range of pH. The oxidation of active radical (SO4·-) and non-radical singlet oxygen (1O2) co-acted on TMP degradation. Besides, PMS was activated through the cycles between Co(II)/Co(III) and Fe(II)/Fe(III). Fifteen degradation intermediates of TMP were identified by LC-MS, and three possible degradation pathways including hydroxylation, demethylation, and cleavage were proposed. The recovered catalysts exhibited high stability and reusability, maintaining 80% TMP removal efficiency with inappreciable metal leaching (0.012 mg/L of Co, 0.113 mg/L of Fe) after six cycles. Besides, the Co-Fe3O4/α-FeOOH/PMS system was highly tolerant to inorganic anions and actual water bodies (river water, lake water, tap water, and sewage plant effluent). Overall, this work provided a promising way to the potential application of Fe-based binary metal oxide for PMS activation.

Highly-efficient and easy separation of γ-Fe2O3 selectively adsorbs U(⠥) in waters.

The migration and transformation of uranyl [U (Ⅵ)] ions in the environment are quite dependent on the geological condition in particular with the site enriched in Fe. In this study, the interfacial interaction of U (Ⅵ) ions with maghemite (γ-Fe2O3) particles was studied and the interaction mechanism was explored as well. Batch experiments confirm that γ-Fe2O3 can effectively remove U (Ⅵ) from an aqueous solution within a relatively short reaction time (R% > 92.01% within 3 min) and has a considerable capacity for U (Ⅵ) uptake (qt: 87.35 mg/g). γ-Fe2O3 displays an excellent selectivity for U (Ⅵ) elimination. Results on the effects of natural organic matter such as humic acid (HA) indicated that HA could promote the interfacial interaction between γ-Fe2O3 and U (Ⅵ) under acidic conditions. Compared with other radionuclides (e.g., Sr(Ⅱ) and Cs(Ⅰ)), U (Ⅵ) was more effectively removed by γ-Fe2O3. The U (Ⅵ) removal by γ-Fe2O3 is primarily due to electrostatic interactions and precipitation that result in the long-term retardation of uranium. γ-Fe2O3 not only can fast and selectively adsorb U (Ⅵ) but also can be magnetically recycled, demonstrating that γ-Fe2O3 is a cost-effective and promising material for the clean-up of uranyl ions from radioactive wastewater.

The "Lab4treat" Outreach Experience: Preparation of Sustainable Magnetic Nanomaterials for Remediation of Model Wastewater.

The Lab4treat experience has been developed to demonstrate the use of magnetic materials in environmental applications. It was projected in the frame of the European project Mat4Treat, and it was tested several times in front of different audiences ranging from school students to the general public in training and/or divulgation events. The experience lends itself to discuss several aspects of actuality, physics and chemistry, which can be explained by modulating the discussion depth level, in order to meet the interests of younger or more experienced people and expand their knowledge. The topic is relevant, dealing with the recycling of urban waste and water depollution. The paper is placed within the field of water treatment for contaminant removal; therefore, a rich collection of recent (and less recent) papers dealing with magnetic materials and environmental issues is described in the Introduction section. In addition, the paper contains a detailed description of the experiment and a list of the possible topics which can be developed during the activity. The experimental approach makes the comprehension of scientific phenomena effective, and, from this perspective, the paper can be considered to be an example of interactive teaching.

Ultrasound and Radiation-Induced Catalytic Oxidation of 1-Phenylethanol to Acetophenone with Iron-Containing Particulate Catalysts.

Iron-containing particulate catalysts of 0.1-1 µm size were prepared by wet and ball-milling procedures from common salts and characterized by FTIR, TGA, UV-Vis, PXRD, FEG-SEM, and XPS analyses. It was found that when the wet method was used, semi-spherical magnetic nanoparticles were formed, whereas the mechanochemical method resulted in the formation of nonmagnetic microscale needles and rectangles. Catalytic activity of the prepared materials in the oxidation of 1-phenylethanol to acetophenone was assessed under conventional heating, microwave (MW) irradiation, ultrasound (US), and oscillating magnetic field of high frequency (induction heating). In general, the catalysts obtained by wet methods exhibit lower activities, whereas the materials prepared by ball milling afford better acetophenone yields (up to 83%). A significant increase in yield (up to 4 times) was observed under the induction heating if compared to conventional heating. The study demonstrated that MW, US irradiations, and induction heating may have great potential as alternative ways to activate the catalytic system for alcohol oxidation. The possibility of the synthesized material to be magnetically recoverable has been also verified.

Pyrrhotite-dependent microbial reduction and magnetic separation for efficient vanadium detoxification and recovery in contaminated aquifer.

Microbial reduction under anaerobic condition is a promising method for remediating vanadate [V(V)] contamination in aquifers, while V(V) may be re-generated with redox fluctuations. The inability to remove vanadium after remediation has become a key issue limiting bioremediation. In this study, we proposed the use of pyrrhotite, a natural mineral with magnetic properties, to immobilize V(V) to insoluble V(IV) under microbial action and remove vanadium from the aquifer using a magnetic field, which could avoid the problem of V(V) recontamination under redox fluctuating conditions. Up to 49.0 ± 4.7 % of vanadium could be removed from the aquifer by the applied magnetic field, and the vanadium in the aquifer after the reaction was mainly in the acid-extractable and reducible states. pH had a strong effect on the magnetic recovery of V(V), while the influence of initial V(V) concentration was weak. Microbial community structure analysis showed that Thiobacillus, Proteiniphilum, Fermentimonas, and Desulfurivibrio played key roles for V(V) reduction and pyrrhotite oxidation. Structural equation model indicated the positive correlation between these genera with the magnetic recovery of vanadium. Real time-qPCR confirmed the roles of functional genes of V(V) reduction (napA and nirK) and SO42- reduction (dsrA) in such biological processes. This study provides a novel route to sustainable V(V) remediation in aquifers, with synchronous recovery of vanadium resources without rebound.

Enhanced photo-Fenton degradation of dyes under visible light with recyclable γ-Fe2O3/CQDs: Catalyst preparation, performance and mechanism insight.

A low band gap and visible light-responsive heterogeneous Photo-Fenton catalyst of γ-Fe2O3/CQDs micron composite was prepared under the one-pot hydrothermal method. The Photo-Fenton degradation of γ-Fe2O3/CQDs towards dye solution of rhodamine B(RhB), methyl blue (MB), and methyl orange (MO) was studied comparatively with α-Fe2O3. The γ-Fe2O3/CQDs exhibited remarkable catalytic performance for various dyes and with a first-order rate (k) of 14 times higher than that of initial α-Fe2O3 with a low concentration of H2O2 of 0.049 mmol. L-1 and a wider pH range of 3.1-7.1. The microstructure of the compounds was observed by XRD, SEM, TEM, FT-IR, and XPS characterization results suggested that the γ-Fe2O3/CQDs nanocomposite was formed through the stable Fe-O-C bonds, thus, the band gap decreased, and it is more favorable for the distance of holes and electrons. The free radical trapping experiment and EPR analysis indicated that •OH and 1O2 were the major active species during the typical photo-Fenton reaction. What's more, the γ-Fe2O3/CQDs also exhibited good stability and magnetic properties. DFT conclusion shows that the mechanism of the potential determination step (PDS) on α-Fe2O3(220) is the cleavage of H2O2 with an energy barrier of only 0.08 eV, which is 0.54 eV lower than that of OH* on γ-Fe2O3(220). Thus it can be deemed that γ-Fe2O3/CQDs perform much higher catalytic activity for the dissociation of H2O2 than α-Fe2O3. This work gives a feasible and economical countermeasure of visible light Photo-Fenton dispose of dye wastewater with a recyclable magnetic γ-Fe2O3/CQDs micron catalyst.

PDMS/magnetic lignin sponge for oil/water separation.

Recyclable, non-toxic, and degradable biological substrates contribute significantly to super-wetting surfaces. In this work, we prepared magnetic micro-nano super-hydrophobic surfaces through a robust solution with magnetic modified lignin particles as the supporting structure. A novel PDMS (polydimethylsiloxane)/magnetic lignin particle (lignin@Fe3O4)/PDA sponge composite was fabricated. Through dopamine (DA) self-polymerization, covalent deposition of magnetic lignin (ML), and PDMS silane modification, the magnetic super-hydrophobic polyurethane sponge composite (Sponge-P) was synthesized so that the Fe3O4 nanoscale microspheres wrapped with microscale lignin magnetic particles adhered to the sponge surface tighter and were barely dislodged. The as-prepared Sponge-P displayed excellent flexibility and a water contact angle of up to 152.2°. The super-hydrophobic sponge prepared with the proposed method was acid-base stable (pH = 2-12), self-cleaning, and suitable for high-salinity seawater. The magnetic super-hydrophobic sponge has good oil-water separation ability and can absorb 43 times its own weight of oil. In the meantime, due to the introduction of magnetic materials into lignin, we not only constructed micro-nanostructures to improve the surface super-hydrophobicity, but also made Sponge-P have the function of magnetic recovery, which has a unique advantage in treating oily wastewater.

Highly efficient flower-like ZnIn2S4/CoFe2O4 photocatalyst with p-n type heterojunction for enhanced hydrogen evolution under visible light irradiation.

The construction of a p-n heterojunction structure is considered to be an effective method to improve the separation of electron-hole pairs in photocatalysts. A series of ZnIn2S4/CoFe2O4 (ZIS/CFO) photocatalysts with p-n heterojunctions were prepared via a method involving ultrasonication and calcination. The synthesized photocatalysts were tested and analyzed via various testing techniques, and their hydrogen evolution rates were evaluated. Compared with pure ZIS, ZIS/CFO with different mass ratios of CFO to ZIS showed improved photocatalytic hydrogen production performance, and the optimal photoactivity showed a nearly 12-fold increase, which can be attributed to the formation of p-n junctions and the formed internal electric field, accelerating the separation of electron-hole pairs and effectively improving the photocatalytic hydrogen evolution rate. The excellent stability of the ZIS/CFO composite was proven by three cycle experiments. In addition, the ZIS/CFO composite also possessed excellent magnetic properties to realize facial magnetic recoverability. This work paves the way for the design and preparation of magnetically recoverable p-n heterojunction photocatalysts.

Pinecone-derived magnetic porous hydrochar co-activated by KHCO3 and K2FeO4 for Cr(VI) and anthracene removal from water.

Herein, magnetic porous pinecone-derived hydrochar (MPHCMW) co-activated by KHCO3 and K2FeO4 through one-step microwave-assisted pyrolysis was innovatively synthesized for hexavalent chromium (Cr(VI)) and anthracene (ANT) removal from water. The analyses of characterization consequences and co-activation mechanisms not merely proved the high specific surface area (703.97 m2/g) and remarkable microporous structures of MPHCMW caused by the synergistic chemical activation of KHCO3 and K2FeO4, but also testified successful loading of Fe0 and Fe3O4 on MPHCMW by the process of carbothermal reduction between K2FeO4 and carbon matrix of hydrochar. The resultant MPHCMW possessed pH-dependence for Cr(VI), while adsorption for ANT was hardly impacted by the pH of solution. Moreover, the adsorption processes of MPHCMW could attain equilibrium within 60 min for Cr(VI) and 30 min for ANT with multiple kinetics, and the corresponding adsorption capacity for Cr(VI) and ANT was 128.15 and 60.70 mg/g, respectively. Additionally, the adsorption percentages of MPBCMW for Cr(VI)/ANT was maintained at 87.87/82.64% after three times of adsorption-desorption cycles. Furthermore, pore filling, complexation, electrostatic interaction, reduction and ion exchange were testified to enhance the removal of Cr(VI), while the ANT removal was achieved via π-π stacking, complexation, pore filling and hydrogen bonding force.

Applications of functionalized magnetic biochar in environmental remediation: A review.

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Magnetic recyclable heterogeneous catalyst Fe3O4/g-C3N4 for tetracycline hydrochloride degradation via photo-Fenton process under visible light.

Antibiotic pollution of water resources is a global problem, and the development of new treatments for destroying antibiotics in water is a priority research. We successfully manufactured recyclable magnetic Fe3O4/g-C3N4 through the electrostatic self-assembly method. Selecting tetracycline (TC) as the target pollutant, using Fe3O4/g-C3N4 and H2O2 developed a heterogeneous optical Fenton system to remove TC under visible light. Fe3O4/g-C3N4 was systematically characterized by SEM, TEM, XRD, FTIR, XPS, DRS, and electrochemical methods. The removal efficiency of 7% Fe3O4/g-C3N4 at pH = 3, H2O2 = 5 mM, and catalyst dosage of 1.0 g/L can reach 99.8%. After magnetic separation, the Fe3O4/g-C3N4 photocatalyst can be recycled five times with minimal efficiency loss. The excellent degradation performance of the prepared catalyst may be attributed to the proper coupling interface between Fe3O4 and g-C3N4 which promotes the separation and transfer of photogenerated electrons. Photogenerated electrons can also accelerate the conversion of Fe3+ to Fe2+, thereby producing more ˙OH. The new Fe3O4/g-C3N4 can be used as a raw material for advanced oxidation of water contaminated by refractory antibiotics.

Access-dispersion-recovery strategy for enhanced mitigation of heavy crude oil pollution using magnetic nanoparticles decorated bacteria.

Heavy crude oil (HCO) pollution has gained global attention, but traditional bioremediating practices demonstrate limited effectiveness. This study developed magnetic nanoparticles decorated bacteria (MNPB) using an oil-degrading and biosurfactant-producing Rhodococcus erythropolis species and identified a novel access-dispersion-recovery strategy for enhanced HCO pollution mitigation. The strategy entails (1) magnetic navigation of the MNPB towards HCO layer, (2) enhanced oil dispersion and formation of suspended oil-bacteria aggregates, and (3) magnetic recovery of these aggregates. The UV-spectrophotometer analysis showed that this strategy can enable up to 62% removal of HCO. The GC-MS analysis demonstrated that the MNPB enhanced the degradation of low-molecular-weight aromatics comparing with the pure bacteria, and the recovery process further removed oil-bacteria aggregates and entrained high-molecular-weight aromatics. The feasibility of using MNPB to mitigate HCO pollution could shed light on the emerging bioremediation applications.

Magnetic Fe3O4/attapulgite hybrids for Cd(II) adsorption: Performance, mechanism and recovery.

Herein, a Fe3O4 decorated attapulgite adsorbent (FA) is fabricated for the removal of Cd(II) from wastewater, and subsequently a feasible strategy for converting the saturated waste adsorbent to CdS/FA photocatalyst is reported. Owing to the in situ growth of Fe3O4 on the attapulgite (ATP), the FA adsorbents exhibit enlarged surface area and increased adsorption sites. More importantly, the strong interaction between Fe3O4 and ATP leads to changes of coordination environment around the O‒Fe‒O bond with the ATP. Based on the results of density functional theory calculations, the electrons are more readily transferred from Fe to O, and the hanging O atoms with more electronegativity act as the efficient adsorption sites for Cd(II), efficiently improving the adsorption performance of the Fe3O4 phases. Furthermore, the waste FA adsorbent could be conveniently separated from the treated water by magnets and converted to CdS/FA photocatalyst, which exhibits satisfying degradation efficiency for tetracycline with low concentration. This work provides a potential strategy to optimize the ATP-based materials for heavy ions adsorption and reutilize the waste adsorbents.

Antibacterial properties of recoverable CuZnO@Fe3O4@GO composites in water treatment.

The growth of bacteria will lead to water quality deterioration and equipment damage. Therefore, it is necessary to control the growth and reproduction of microorganisms in water treatment. A new type of magnetic recoverable CuZnO@Fe3O4@GO composites was prepared by ultrasonic method, and the composites were characterized and analyzed by SEM, TEM, XPS, and other methods. The optimum mass ratio of composites was determined by orthogonal experiment, and the antibacterial properties and mechanism of the composite were investigated by gram-positive bacteria Staphylococcus aureus and gram-negative bacteria Escherichia coli. Finally, the antibacterial properties of the composites in the effluent of the secondary sedimentation tank were researched. It was shown that the optimum mass ratio of the composites was GO:Fe3O4:CuZnO =1:2:3. When the dosage of composites was 180 mg L-1 and the action time was 100 min, the antibacterial rate against S. aureus and E. coli reached more than 99.5%. The composites could destroy the cell structure of two kinds of bacteria, increase the content of active oxygen in bacteria cells, and enhance the leakage rate of protein by more than 9 times in 150 min, thereby causing the death of the bacteria. And the antibacterial rate of the composites in effluent of the secondary sedimentation tank could reach 99%, and the magnetic recovery rate could reach more than 98%. After 5 cycles of use, the antibacterial rate could still exceed 90%.

Photocatalysis Meets Magnetism: Designing Magnetically Recoverable Supports for Visible-Light Photocatalysis.

While magnetic supports have been widely used to immobilize homogeneous catalysts in organic chemistry, this strategy has so far found very little application in photocatalysis. Indeed, magnetic supports are dark colored, and thus compete for photon absorption with photocatalysts themselves. We have developed a series of core-shell Fe(0)-silica nanoparticles as supports for immobilizing the photosensitizer Ru(bpy)32+, featuring various silica shell thicknesses-16-34 nm SiO2-on 9 nm Fe cores. The supports and the resulting photocatalytic systems were studied for their magnetic, optical, and catalytic properties in the context of the photooxidation of citronellol, and we found that thicker silica shells lead to higher catalytic activity. We correlated this effect as well as Ru(bpy)32+ fluorescence and singlet oxygen generation to the absorption properties of the supports. We were able to reuse our optimal system three times with minimal loss of activity and achieved turnover numbers largely surpassing the performance of homogeneous Ru(bpy)32+. This work highlights the role of material design in the conception of new supports for applications in heterogeneous photocatalysis.

Full-scale increased iron dosage to stimulate the formation of vivianite and its recovery from digested sewage sludge.

The recovery of phosphorus from secondary sources like sewage sludge is essential in a world suffering from resources depletion. Recent studies have demonstrated that phosphorus can be magnetically recovered as vivianite (Fe(II)3(PO4)2∗8H2O) from the digested sludge (DS) of Waste Water Treatment Plants (WWTP) dosing iron. To study the production of vivianite in digested sludge, the quantity of Fe dosed at the WWTP of Nieuwveer (The Netherlands) was increased (from 0.83 to 1.53 kg Fe/kg P in the influent), and the possible benefits for the functioning of the WWTP were evaluated. Higher Fe dosing is not only relevant for P-recovery, but also for maximal recovery of organics from influent for e.g. biogas production. The share of phosphorus present as vivianite in the DS increased from 20% to 50% after the increase in Fe dosing, making more phosphorus available for future magnetic recovery. This increase was directly proportional to the increase of Fe in DS, suggesting that vivianite could be favored not only thermodynamically, but also kinetically. Interestingly, analyses suggest that several types of vivianite are formed in the WWTP, and could differ in their purity, oxidation state or crystallinity. These differences could have an impact on the subsequent magnetic separation. Following the Fe dosing increase, P in the effluent and H2S in the biogas both decreased: 1.28 to 0.42 ppm for P and 26 to 8 ppm for H2S. No negative impact on the nitrogen removal, biogas production, COD removal or dewaterability was observed. Since quantification of vivianite in DS is complicated, previous studies were reviewed and we proposed a more accurate Mössbauer spectroscopy analysis and fitting for sludge samples. This study is important from a P recovery point of view, but also because iron addition can play a crucial role in future resource recovery wastewater facilities.

Quantitative effects of Fe3O4 nanoparticle content on Li+ adsorption and magnetic recovery performances of magnetic lithium-aluminum layered double hydroxides in ultrahigh Mg/Li ratio brines.

The quantitative effects of magnetic Fe3O4 nanoparticle content on Li+ adsorption and magnetic recovery performances of magnetic lithium-aluminum layered double hydroxides (MLDHs) were investigated systematically. MLDHs with different Fe3O4 nanoparticle contents were synthesized by a staged chemical coprecipitation method. The property disparities of these MLDHs were analyzed by various characterizations and results proved the existence of magnetic nanoparticles had no impairment on MLDHs crystal structure stability while the mesopores were lessened with the increasing Fe3O4 contents. In adsorption experiments using Qarhan Salt Lake brine with Mg/Li mass ratio of 284, the Li+ adsorption capacity of MLDHs presented a downtrend with the increasing Fe3O4, while the increased magnetic components had positive influence on the Li+ separation with Mg2+ on account of the steric effect. MLDHs presented excellent Li+ selectivity that the Mg/Li mass ratio of desorption solution was significantly decreased below 7.0. Relying on the superparamagnetism, MLDHs recovery all exceeded 97 % in the external magnetic field for only 10 min, and the magnetic recovery performance was promoted with more Fe3O4 nanoparticles. Furthermore, on the basis of experimental data, precise models were built and described well the correlations of Fe3O4 contents of MLDHs with Li+ adsorption capacity and magnetic recovery rate, respectively.

Immobilized glucose oxidase on magnetic silica and alumina: Beyond magnetic separation.

Here we report immobilization of glucose oxidase (GOx) on magnetic silica (Fe3O4-SiO2) and alumina (Fe3O4-Al2O3) functionalized with amino groups using glutaraldehyde as a linker. Magnetic support based biocatalysts demonstrate high catalytic activity in d-glucose oxidation to D-gluconic acid at pH 5-7.5 and temperature of 30-50 °C with the best activities of 95% and 91% for magnetic silica and alumina, respectively. A comparison of magnetic and non-magnetic alumina and silica shows a significant enhancement of the relative catalytic activity for magnetic supports, while the silica based biocatalysts show a higher activity than the biocatalysts based on alumina. A noticeably higher activity of GOx immobilized on magnetic supports is explained by synergy of the GOx inherent activity and enzyme-like activity of iron oxide nanoparticles, while the enhancement with silica based catalysts is most likely due to a larger pore size and stronger Brønsted acid sites. Excellent relative activity of Fe3O4-SiO2-GOx (95% of native GOx) in a tolerant pH and temperature range as well as high stability in a repeated use (6% relative activity loss after five catalytic cycles) makes this catalyst promising for practical applications.

Quantitative effects of amination degree on the magnetic iron oxide nanoparticles (MIONPs) using as adsorbents to remove aqueous heavy metal ions.

The hierarchical effect of amine-functionalization on nanoparticle properties, magnetism especially, and adsorption of Cu2+, Ni2+, Pb2+ and Zn2+ by aminated MIONPs were investigated elaboratively. The results reflected that the dispersibility and stability of nanoparticles in aqueous solution were both enhanced as MIONPs grafted with amine groups, while saturation magnetism and magnetic recovery conveniences had a negatively correlative relation with the amination degree. In addition, the adsorption performances of Cu2+, Ni2+, Pb2+ and Zn2+ by different aminated MIONPs were also studied comprehensively. The results showed that the initial adsorption rates and adsorption capacities of heavy metal ions increased with the amination degree. In addition, the quantitative correlation between amination degree and adsorption capacities of different heavy metal ions could be described well by a model built on basis of adsorption processes.