Mechanotransduction's impact on animal development, evolution, and tumorigenesis.

Mechanotransduction translates mechanical signals into biochemical signals. It is based on the soft-matter properties of biomolecules or membranes that deform in response to mechanical loads to trigger activation of biochemical reactions. The study of mechanotransductive processes in cell-structure organization has been initiated in vitro in many biological contexts, such as examining cells' response to substrate rigidity increases associated with tumor fibrosis and to blood flow pressure. In vivo, the study of mechanotransduction in regulating physiological processes has focused primarily on the context of embryogenesis, with an increasing number of examples demonstrating its importance for both differentiation and morphogenesis. The conservation across species of mechanical induction in early embryonic patterning now suggests that major animal transitions, such as mesoderm emergence, may have been based on mechanotransduction pathways. In adult animal tissues, permanent stiffness and tissue growth pressure contribute to tumorigenesis and appear to reactivate such conserved embryonic mechanosensitive pathways.

Local Heat Dissipation and Elasticity of Suspended Silicon Nanowires Revealed by Dual Scanning Electron and Thermal Microscopies.

A novel combined setup, with a scanning thermal microscope (SThM) embedded in a scanning electron microscope (SEM), is used to characterize a suspended silicon rough nanowire (NW), which is epitaxially clamped at both sides and therefore monolithically integrated in a microfabricated device. The rough nature of the NW surface, which prohibits vacuum-SThM due to loose contact for heat dissipation, is circumvented by decorating the NW with periodic platinum dots. Reproducible approaches over these dots, enabled by the live feedback image provided by the SEM, yield a strong improvement in thermal contact resistance and a higher accuracy in its estimation. The results-thermal resistance at the tip-sample contact of 188±3.7K µW-1 and thermal conductivity of the NW of 13.7±1.6W m-1 K-1-are obtained by performing a series of approach curves on the dots. Noteworthy, the technique allows measuring elastic properties at the same time-the moment of inertia of the NW is found to be (6.1±1.0) × 10-30m4-which permits to correlate the respective effects of the rough shell on heat dissipation and on the NW stiffness. The work highlights the capabilities of the dual SThM/SEM instrument, in particular the interest of systematic approach curves with well-positioned and monitored tip motion.

An evaluation of shear wave elastographic characteristics of the supraspinatus tendon after rotator cuff repair.

BACKGROUND: The main complication of rotator cuff repair is retear, which is most common in older patients and patients with greater tear sizes. However, it is unknown why these factors are associated with increased rates of retear. The aim of this study was to determine whether the factors associated with rotator cuff retear (age, tear size, sex, history of trauma, and duration of symptoms) are also associated with decreased mechanical stiffness of the supraspinatus tendon after repair, as assessed by shear wave elastography. METHODS: This was a prospective study of 50 patients undergoing primary rotator cuff repair. A sonographer conducted shear wave elastography ultrasound in all patients at 1, 6, 12, 26, and 52 weeks after repair. The shear wave velocity of the supraspinatus tendon was measured at the tendon-bone interface, 3 mm medial to the interface, and 6 mm medial to the interface. A multiple linear regression analysis was performed with calculation of Cohen F2 values to determine the factors that independently affected supraspinatus tendon stiffness postoperatively. RESULTS: For every decade increase in age, the shear wave velocity of the supraspinatus tendon decreased by 0.5 m/s (P = .004). Greater tear size correlated with reduced supraspinatus shear wave velocity (P < .03 at 6 weeks). Male patients had greater supraspinatus tendon stiffness than female patients (8.2 m/s vs. 6.9 m/s, P = .04). Tendons in patients with a history of trauma were approximately 16% stiffer postoperatively than those in patients with no trauma history (P < .001). Duration of symptoms had no impact on the mechanical stiffness of the supraspinatus tendon. CONCLUSION: Older age, larger tear size, female sex, and nontraumatic tear causation were independently associated with reduced shear wave velocity of the supraspinatus tendon postoperatively. The findings of our study correlate with the results of cohort studies assessing the influence of these variables on rotator cuff retear rates, suggesting that the mechanical stiffness of the supraspinatus tendon, as assessed by shear wave elastography, may have an important association with a successful repair.

Mechanical Pressure Driving Proteoglycan Expression in Mammographic Density: a Self-perpetuating Cycle?

Regions of high mammographic density (MD) in the breast are characterised by a proteoglycan (PG)-rich fibrous stroma, where PGs mediate aligned collagen fibrils to control tissue stiffness and hence the response to mechanical forces. Literature is accumulating to support the notion that mechanical stiffness may drive PG synthesis in the breast contributing to MD. We review emerging patterns in MD and other biological settings, of a positive feedback cycle of force promoting PG synthesis, such as in articular cartilage, due to increased pressure on weight bearing joints. Furthermore, we present evidence to suggest a pro-tumorigenic effect of increased mechanical force on epithelial cells in contexts where PG-mediated, aligned collagen fibrous tissue abounds, with implications for breast cancer development attributable to high MD. Finally, we summarise means through which this positive feedback mechanism of PG synthesis may be intercepted to reduce mechanical force within tissues and thus reduce disease burden.

Arterial Wall Stiffening in Caveolin-1 Deficiency-Induced Pulmonary Artery Hypertension in Mice.

BACKGROUND: Pulmonary artery hypertension (PAH) is a complex disorder that can lead to right heart failure. The generation of caveolin-1 deficient mice (CAV-1-/-) has provided an alternative genetic model to study the mechanisms of pulmonary hypertension. However, the vascular adaptations in these mice have not been characterized. OBJECTIVE: To determine the histological and functional changes in the pulmonary and carotid arteries in CAV-1-/- induced PAH. METHODS: Pulmonary and carotid arteries of young (4-6 months old) and mature (9-12 months old) CAV-1-/- mice were tested and compared to normal wild type mice. RESULTS: Artery stiffness increases in CAV-1-/- mice, especially the circumferential stiffness of the pulmonary arteries. Increases in stiffness were quantified by a decrease in circumferential stretch and transition strain, increases in elastic moduli, and an increase in total strain energy at physiologic strains. Changes in mechanical properties for the pulmonary artery correlated with increased collagen content while carotid artery mechanical properties correlated with decreased elastin content. CONCLUSIONS: We demonstrated that an increase in artery stiffness is associated with CAV-1 deficiency-induced pulmonary hypertension. These results improve our understanding of artery remodeling in PAH.

Regulation of pigmentation by substrate elasticity in normal human melanocytes and melanotic MNT1 human melanoma cells.

The elasticity of the cellular microenvironment is a key regulator of cellular physiology in many cell types. To investigate the effects of substrate stiffness on the pigmentation process, we cultured normal human melanocytes (NHM) and MNT1 melanoma cells on laminin-coated polydimethylsiloxane (PDMS) substrates of different stiffness. The dendricity of NHM and MNT1 cells was reduced as the substrate stiffness decreased, and the degree of melanosome transfer from NHM or MNT1 cells to normal human keratinocytes was decreased on softer substrates with the reduced dendricity. Gene and protein expressions of MITF, tyrosinase, TRP2, and gp100/PMEL17 exhibited a consistent decreasing trend with the decreasing stiffness. Because the stiffness sensing is mediated by focal adhesion complex through integrin receptors, we checked laminin specific integrin alpha 6 and p-FAK for MNT1 cells to observe that the substrate adhesion was weakened as the substrate stiffness decreased. Weaker adhesion on a softer substrate was accompanied by dynamic shape changes in MNT1 cells with higher speed and larger scattering. Dendritic MNT1 cells cultured on a stiffer substrate exhibited lower migration with smaller root mean squared displacement. These results demonstrate the possibility that skin pigmentation can be influenced by mechanical properties of the cellular microenvironment and can increase when the skin becomes stiff.

Long-term application of the aldosterone antagonist spironolactone prevents stiff endothelial cell syndrome.

Aldosterone triggers the stiff endothelial cell syndrome (SECS), characterized by an up-regulation of epithelial sodium channels (ENaCs) and mechanical stiffening of the endothelial cell cortex accompanied by endothelial dysfunction. In vivo, aldosterone antagonism exerts sustained protection on the cardiovascular system. To illuminate the molecular mechanisms of this time-dependent effect, a study on endothelial cells in vitro and ex vivo was designed to investigate SECS over time. Endothelia (from human umbilical veins, bovine aortae, and explants of human arteries) were cultured in aldosterone-supplemented medium with or without the mineralocorticoid receptor (MR) antagonist spironolactone. MR expression, ENaC expression, cortical stiffness, and shear-mediated nitric oxide (NO) release were determined after 3 d (short term) and up to 24 d (long term). Over time, MR expression increased by 129%. ENaC expression and surface abundance increased by 32% and 42% (13.8 to 19.6 molecules per cell surface), paralleled by a 49% rise in stiffness. Spironolactone prevented this development and, after 3 wk of treatment, increased NO release by 50%. Thus, spironolactone improves endothelial function long-lastingly by preventing a time-dependent manifestation of SECS. This emphasizes the key role of vascular endothelium as a therapeutical target in cardiovascular disorders and might explain blood pressure independent actions of MR antagonism.

Supragel-mediated efficient generation of pancreatic progenitor clusters and functional glucose-responsive islet-like clusters.

Although several synthetic hydrogels with defined stiffness have been developed to facilitate the proliferation and maintenance of human pluripotent stem cells (hPSCs), the influence of biochemical cues in lineage-specific differentiation and functional cluster formation has been rarely reported. Here, we present the application of Supragel, a supramolecular hydrogel formed by synthesized biotinylated peptides, for islet-like cluster differentiation. We observed that Supragel, with a peptide concentration of 5 mg/mL promoted spontaneous hPSCs formation into uniform clusters, which is mainly attributable to a supporting stiffness of ∼1.5 kPa as provided by the Supragel matrix. Supragel was also found to interact with the hPSCs and facilitate endodermal and subsequent insulin-secreting cell differentiation, partially through its components: the sequences of RGD and YIGSR that interacts with cell membrane molecules of integrin receptor. Compared to Matrigel and suspension culturing conditions, more efficient differentiation of the hPSCs was also observed at the stages 3 and 4, as well as the final stage toward generation of insulin-secreting cells. This could be explained by 1) suitable average size of the hPSCs clusters cultured on Supragel; 2) appropriate level of cell adhesive sites provided by Supragel during differentiation. It is worth noting that the Supragel culture system was more tolerance in terms of the initial seeding densities and less demanding, since a standard static cell culture condition was sufficient for the entire differentiation process. Our observations demonstrate a positive role of Supragel for hPSCs differentiation into islet-like cells, with additional potential in facilitating germ layer differentiation.

Performance domains of bio-inspired and triangular lattice patterns to optimize the structures' stiffness.

Mass reduction of mechanical systems is a recurrent objective in engineering, which is often reached by removing material from its mechanical parts. However, this material removal leads to a decrease of mechanical performances for the parts, which must be minimized and controlled to avoid a potential system failure. To find a middle-ground between material removing and mechanical performances), material must be kept only in areas where it is necessary, for example using stress-driven material removal methods. These methods use the stress field to define the local material removal based on two local parameters: the local volume fraction vf and the structural anisotropy orientation ß. These methods may be based on different types of cellular structure patterns: lattice-based or bio-inspired. The long-term objective of this study is to improve the performance of stress-driven methods by using the most efficient pattern. For this purpose, this study investigates the influence of vf and ß on the mechanical stiffness of three planar cellular structures called Periodic Stress-Driven Material Removal (PSDMR) structures. The first, taken from the literature, is bio-inspired from bone and based on a square pattern. The second, developed in this study, is also bio-inspired from bone but based on a rectangular pattern. The third is a strut-based lattice pattern well documented in the literature for its isotropic behavior. These three patterns are compared in this study in terms of relative longitudinal stiffness, obtained through linear elastic compressive tests by finite element analysis. It is highlighted that each PSDMR pattern has a specific domain in which it performs better than the two others. In future works, these domains could be used in stress-driven material removal methods to select the most adequate pattern or a mix of them to improve the performances of parts.

Mechanical stiffness promotes skin fibrosis through FAPα-AKT signaling pathway.

BACKGROUND: Myofibroblasts contribute to the excessive production, remodeling and cross-linking of the extracellular matrix that characterizes the progression of skin fibrosis. An important insight into the pathogenesis of tissue fibrosis has been the discovery that increased matrix stiffness during fibrosis progression is involved in myofibroblast activation. However, mechanistic basis for this phenomenon remains elusive. OBJECTIVE: To explore the role of fibroblast activation protein-α (FAPα) in mechanical stiffness-induced skin fibrosis progression. METHODS: RNA-seq was performed to compare differential genes of mouse dermal fibroblasts (MDFs) grown on low or high stiffness plates. This process identified FAPα, which is a membrane protein usually overexpressed in activated fibroblasts, as a suitable candidate. In vitro assay, we investigate the role of FAPα in mechanical stiffness-induced MDFs activation and downstream pathway. By establishing mouse skin fibrosis model and intradermally administrating FAPα adeno-associated virus (AAV) or a selective Fap inhibitor FAPi, we explore the role of FAPα in skin fibrosis in vivo. RESULTS: We show that FAPα, a membrane protein highly expressed in myofibroblasts of skin fibrotic tissues, is regulated by increased matrix stiffness. Genetic deletion or pharmacological inhibition of FAPα significantly inhibits mechanical stiffness-induced activation of myofibroblasts in vitro. Mechanistically, FAPα promotes myofibroblast activation by stimulating the PI3K-Akt pathway. Furthermore, we showed that administration of the inhibitor FAPi or FAPα targeted knockdown ameliorated the progression of skin fibrosis. CONCLUSION: Taken together, we identify FAPα as an important driver of mechanical stiffness-induced skin fibrosis and a potential therapeutic target for the treatment of skin fibrosis.

hucMSCs treatment prevents pulmonary fibrosis by reducing circANKRD42-YAP1-mediated mechanical stiffness.

Idiopathic pulmonary fibrosis (IPF) is a fibrosing interstitial pneumonia of unknown cause. The most typical characteristic of IPF is gradual weakening of pulmonary elasticity and increase in hardness/rigidity with aging. This study aims to identify a novel treatment approach for IPF and explore mechanism of mechanical stiffness underlying human umbilical cord mesenchymal stem cells (hucMSCs) therapy. Target ability of hucMSCs was examined by labeling with cell membrane dye Dil. Anti-pulmonary fibrosis effect of hucMSCs therapy by reducing mechanical stiffness was evaluated by lung function analysis and MicroCT imaging system and atomic force microscope in vivo and in vitro. Results showed that stiff environment of fibrogenesis caused cells to establish a mechanical connection between cytoplasm and nucleus, initiating expression of related mechanical genes such as Myo1c and F-actin. HucMSCs treatment blocked force transmission and reduced mechanical force. For further exploration of mechanism, ATGGAG was mutated to CTTGCG (the binding site of miR-136-5p) in the full-length sequence of circANKRD42. Wildtype and mutant plasmids of circANKRD42 were packaged into adenovirus vectors and sprayed into lungs of mice. Mechanistic dissection revealed that hucMSCs treatment repressed circANKRD42 reverse splicing biogenesis by inhibiting hnRNP L, which in turn promoted miR-136-5p binds to 3'-Untranslated Region (3'-UTR) of YAP1 mRNA directly, thus inhibiting translation of YAP1 and reducing YAP1 protein entering nucleus. The condition repressed expression of related mechanical genes to block force transmission and reduce mechanical forces. The mechanosensing mechanism mediated directly by circANKRD42-YAP1 axis in hucMSCs treatment, which has potential general applicability in IPF treatment.

Microstructurally and mechanically tunable acellular hydrogel scaffold using carboxymethyl cellulose for potential osteochondral tissue engineering.

In tissue engineering, scaffold microstructures and mechanical cues play a significant role in regulating stem cell differentiation, proliferation, and infiltration, offering a promising strategy for osteochondral tissue repair. In this present study, we aimed to develop a facile method to fabricate an acellular hydrogel scaffold (AHS) with tunable mechanical stiffness and microstructures using carboxymethyl cellulose (CMC). The impacts of the degree of crosslinking, crosslinker length, and matrix density on the AHS were investigated using different characterization methods, and the in vitro biocompatible of AHS was also examined. Our CMC-based AHS showed tunable mechanical stiffness ranging from 50 kPa to 300 kPa and adjustable microporous size between 50 µm and 200 µm. In addition, the AHS was also proven biocompatible and did not negatively affect rabbit bone marrow stem cells' dual-linage differentiation into osteoblasts and chondrocytes. In conclusion, our approach may present a promising method in osteochondral tissue engineering.

Machine Learning Algorithms for Predicting Mechanical Stiffness of Lattice Structure-Based Polymer Foam.

Polymer foams are extensively utilized because of their superior mechanical and energy-absorbing capabilities; however, foam materials of consistent geometry are difficult to produce because of their random microstructure and stochastic nature. Alternatively, lattice structures provide greater design freedom to achieve desired material properties by replicating mesoscale unit cells. Such complex lattice structures can only be manufactured effectively by additive manufacturing or 3D printing. The mechanical properties of lattice parts are greatly influenced by the lattice parameters that define the lattice geometries. To study the effect of lattice parameters on the mechanical stiffness of lattice parts, 360 lattice parts were designed by varying five lattice parameters, namely, lattice type, cell length along the X, Y, and Z axes, and cell wall thickness. Computational analyses were performed by applying the same loading condition on these lattice parts and recording corresponding strain deformations. To effectively capture the correlation between these lattice parameters and parts' stiffness, five machine learning (ML) algorithms were compared. These are Linear Regression (LR), Polynomial Regression (PR), Decision Tree (DT), Random Forest (RF), and Artificial Neural Network (ANN). Using evaluation metrics such as mean squared error (MSE), root mean squared error (RMSE), and mean absolute error (MAE), all ML algorithms exhibited significantly low prediction errors during the training and testing phases; however, the Taylor diagram demonstrated that ANN surpassed other algorithms, with a correlation coefficient of 0.93. That finding was further supported by the relative error box plot and by comparing actual vs. predicted values plots. This study revealed the accurate prediction of the mechanical stiffness of lattice parts for the desired set of lattice parameters.

Computational studies on the design of NCI natural products as inhibitors to SARS-CoV-2 main protease.

The pandemic coronavirus disease (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has resulted in more than 5 million deaths globally. Currently there are no effective drugs available to treat COVID-19. The viral protease replication can be blocked by the inhibition of main protease that is encoded in polyprotein 1a and is therefore a potential protein target for drug discovery. We have carried out virtual screening of NCI natural compounds followed by molecular docking in order to identify hit molecules as probable SARS-CoV-2 main protease inhibitors. The molecular dynamics (MD) simulations of apo form in complex with N3, α-ketoamide and NCI natural products was used to validate the screened compounds. The MD simulations trajectories were analyzed using normal mode analysis and principal component analysis revealing dynamical nature of the protein. These findings aid in understanding the binding of natural products and molecular mechanisms of SARS-CoV-2 main protease inhibition.Communicated by Ramaswamy H. Sarma.

Silk Fibroin as a Bioink - A Thematic Review of Functionalization Strategies for Bioprinting Applications.

Bioprinting is an emerging tissue engineering technique that has attracted the attention of researchers around the world, for its ability to create tissue constructs that recapitulate physiological function. While the technique has been receiving hype, there are still limitations to the use of bioprinting in practical applications, much of which is due to inappropriate bioink design that is unable to recapitulate complex tissue architecture. Silk fibroin (SF) is an exciting and promising bioink candidate that has been increasingly popular in bioprinting applications because of its processability, biodegradability, and biocompatibility properties. However, due to its lack of optimum gelation properties, functionalization strategies need to be employed so that SF can be effectively used in bioprinting applications. These functionalization strategies are processing methods which allow SF to be compatible with specific bioprinting techniques. Previous literature reviews of SF as a bioink mainly focus on discussing different methods to functionalize SF as a bioink, while a comprehensive review on categorizing SF functional methods according to their potential applications is missing. This paper seeks to discuss and compartmentalize the different strategies used to functionalize SF for bioprinting and categorize the strategies for each bioprinting method (namely, inkjet, extrusion, and light-based bioprinting). By compartmentalizing the various strategies for each printing method, the paper illustrates how each strategy is better suited for a target tissue application. The paper will also discuss applications of SF bioinks in regenerating various tissue types and the challenges and future trends that SF can take in its role as a bioink material.

Alpha-mangostin dephosphorylates ERM to induce adhesion and decrease surface stiffness in KG-1 cells.

Surface stiffness is a unique indicator of various cellular states and events and needs to be tightly controlled. α-Mangostin, a natural compound with numerous bioactivities, reduces the mechanical stiffness of various cells; however, the mechanism by which it affects the actin cytoskeleton remains unclear. We aimed to elucidate the mechanism underlying α-mangostin activity on the surface stiffness of leukocytes. We treated spherical non-adherent myelomonocytic KG-1 cells with α-mangostin; it clearly reduced their surface stiffness and disrupted their microvilli. The α-mangostin-induced reduction in surface stiffness was inhibited by calyculin A, a protein phosphatase inhibitor. α-Mangostin also induced KG-1 cell adhesion to a fibronectin-coated surface. In KG-1 cells, a decrease in surface stiffness and the induction of cell adhesion are largely attributed to the dephosphorylation of ezrin/radixin/moesin proteins (ERMs); α-mangostin reduced the levels of phosphorylated ERMs. It further increased protein kinase C (PKC) activity. α-Mangostin-induced KG-1 cell adhesion and cell surface softness were inhibited by the PKC inhibitor GF109203X. The results of the present study suggest that α-mangostin decreases stiffness and induces adhesion of KG-1 cells via PKC activation and ERM dephosphorylation.

Molecular mechanism of ATP and RNA binding to Zika virus NS3 helicase and identification of repurposed drugs using molecular dynamics simulations.

Congenital Zika virus syndrome has caused a public health emergency of international concern. So far, there are no drugs available to prevent or treat the infection caused by Zika virus. The Zika virus NS3 helicase is a potential protein target for drug discovery due to its vital role in viral genome replication. NS3 helicase unwinds the viral RNA to enable the reproduction of the viral genome by the NS5 protein. NS3 helicase has two crucial binding sites; the ATP binding site and the RNA binding site. We used molecular docking and molecular dynamics (MD) simulations to study the structural behavior of Zika virus NS3 helicase in its apo form and in the presence of ATP, single-stranded RNA, and both ATP-RNA to understand their potential implications in NS3 helicase activity. Further, we have carried out virtual screening of FDA approved drugs, followed by molecular docking to identify the ATP-competitive hit molecules as probable Zika virus NS3 helicase inhibitors. The MD simulations trajectories were analyzed using normal mode analysis and principal component analysis that reveals fluctuations in the R-loop. These findings aid in understanding the molecular mechanisms of the simultaneous binding of ATP and RNA, and guide the design and discovery of new inhibitors of the Zika virus NS3 helicase as a promising drug target to treat the Zika virus infection. Communicated by Ramaswamy H. Sarma.

Fragment-based inhibitor design for SARS-CoV2 main protease.

COVID-19 disease caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV2) has resulted in tremendous loss of lives across the world and is continuing to do so. Extensive work is under progress to develop inhibitors which can prevent the disease by arresting the virus in its life cycle. One such way is by targeting the main protease of the virus which is crucial for the cleavage and conversion of polyproteins into functional units of polypeptides. In this endeavor, our effort was to identify hit molecule inhibitors for SARS-CoV2 main protease using fragment-based drug discovery (FBDD), based on the available crystal structure of chromene-based inhibitor (PDB_ID: 6M2N). The designed molecules were validated by molecular docking and molecular dynamics simulations. The stability of the complexes was further assessed by calculating their binding free energies, normal mode analysis, mechanical stiffness, and principal component analysis. Supplementary Information: The online version contains supplementary material available at 10.1007/s11224-022-01995-z.

Mechanical stiffness softening and cell adhesion are coordinately regulated by ERM dephosphorylation in KG-1 cells.

Mechanical stiffness is closely related to cell adhesion and rounding in some cells. In leukocytes, dephosphorylation of ezrin/radixin/moesin (ERM) proteins is linked to cell adhesion events. To elucidate the relationship between surface stiffness, cell adhesion, and ERM dephosphorylation in leukocytes, we examined the relationship in the myelogenous leukemia line, KG-1, by treatment with modulation drugs. KG-1 cells have ring-shaped cortical actin with microvilli as the only F-actin cytoskeleton, and the actin structure constructs the mechanical stiffness of the cells. Phorbol 12-myristate 13-acetate and staurosporine, which induced cell adhesion to fibronectin surface and ERM dephosphorylation, caused a decrease in surface stiffness in KG-1 cells. Calyculin A, which inhibited ERM dephosphorylation and had no effect on cell adhesion, did not affect surface stiffness. To clarify whether decreasing cell surface stiffness and inducing cell adhesion are equivalent, we examined KG-1 cell adhesion by treatment with actin-attenuated cell softening reagents. Cytochalasin D clearly diminished cell adhesion, and high concentrations of Y27632 slightly induced cell adhesion. Only Y27632 slightly decreased ERM phosphorylation in KG-1 cells. Thus, decreasing cell surface stiffness and inducing cell adhesion are not equivalent, but these phenomena are coordinately regulated by ERM dephosphorylation in KG-1 cells.

Developing a biomechanical model-based elasticity imaging method for assessing hormone receptor positive breast cancer treatment-related myocardial stiffness changes.

Purpose: Assessing cardiotoxicity as a result of breast cancer therapeutics is increasingly important as breast cancer diagnoses are trending younger and overall survival is increasing. With evidence showing that prevention of cardiotoxicity plays a significant role in increasing overall survival, there is an unmet need for accurate non-invasive methods to assess cardiac injury due to cancer therapies. Current clinical methods are too coarse and emerging research methods have not yet achieved clinical implementation. Approach: As a proof of concept, we examine myocardial elasticity imaging in the setting of premenopausal women diagnosed with hormone receptor positive (HR-positive) breast cancer undergoing severe estrogen depletion, as cardiovascular injury from early estrogen depletion is well-established. We evaluate the ability of our model-based cardiac elasticity imaging analysis method to indicate subclinical cancer therapy-related cardiac decline by examining differences in the change in cardiac elasticity over time in two cohorts of premenopausal women either undergoing severe estrogen depletion for HR-positive breast cancer or triple negative breast cancer patients as comparators. Results: Our method was capable of producing functional mechanical elasticity maps of the left ventricle (LV). Using these elasticity maps, we show significant differences in cardiac mechanical elasticity in the HR-positive breast cancer cohort compared to the comparator cohort. Conclusions: We present our methodology to assess the mechanical stiffness of the LV by interrogating cardiac magnetic resonance images within a computational biomechanical model. Our preliminary study suggests the potential of this method for examining cardiac tissue mechanical stiffness properties as an early indicator of cardiac decline.