Phenylacetylene-Terminated Poly(Ethylene Glycol) as Ligands for Colloidal Noble Metal Nanoparticles: a New Tool for "Grafting to" Approach.

We report a new design of polymer phenylacetylene (PA) ligands and the ligand exchange methodology for colloidal noble metal nanoparticles (NPs). PA-terminated poly(ethylene glycol) (PEG) can bind to metal NPs through acetylide (M-C≡C-R) that affords a high grafting density. The ligand-metal interaction can be switched between σ bonding and extended π backbonding by changing grafting conditions. The σ bonding of PEG-PA with NPs is strong and it can compete with other capping ligands including thiols, while the π backbonding is much weaker. The σ bonding is also demonstrated to improve the catalytic performance of Pd for ethanol oxidation and prevent surface absorption of the reaction intermediates. Those unique binding characteristics will enrich the toolbox in the control of colloidal surface chemistry and their applications using polymer ligands.

Unveiling the Morphology of Carbon-Supported Ru Nanoparticles by Multiscale Modeling.

Simulating the behavior of metal nanoparticles on supports is crucial for boosting their catalytic performance and various nanotechnology applications; however, such simulations are limited by the conflicts between accuracy and efficiency. Herein, we introduce a multiscale modeling strategy to unveil the morphology of Ru supported on pristine and N-doped graphene. Our multiscale modeling started with the electronic structures of a supported Ru single atom, revealing the strong metal-support interaction around pyridinic nitrogen sites. To determine the stable configurations of Ru2-13 clusters on three different graphene supports, global energy minimum searches were performed. The sintering of the global minimum Ru13 clusters on supports was further simulated by ab initio molecular dynamics (AIMD). The AIMD data set was then collected for deep potential molecular dynamics to study the melting of Ru nanoparticles. This study presents comprehensive descriptions of carbon-supported Ru and develops modeling approaches that bridge different scales and can be applied to various supported nanoparticle systems.

Real-Time Simulation of the Reaction Kinetics of Supported Metal Nanoparticles.

A common issue with supported metal catalysts is the sintering of metal nanoparticles, resulting in catalyst deactivation. In this study, we propose a theoretical framework for realizing a real-time simulation of the reactivity of supported metal nanoparticles during the sintering process, combining density functional theory calculations, microkinetic modeling, Wulff-Kaichew construction, and sintering kinetic simulations. To validate our approach, we demonstrate its feasibility on α-Al2O3(0001)-supported Ag nanoparticles, where the simulated sintering behavior and ethylene epoxidation reaction rate as a function of time show qualitative agreement with experimental observation. Our proposed theoretical approach can be employed to screen out the promising microstructure feature of α-Al2O3 for stable supported Ag NPs, including the surface orientation and promoter species modified on it. The outlined approach of this work may be applied to a range of different thermocatalytic reactions other than ethylene epoxidation and provide guidance for the development of supported metal catalysts with long-term stability.

A Diffusive Artificial Synapse Based on Charged Metal Nanoparticles.

We show that a diffusive memristor with analogue switching characteristics can be achieved in a layer of gold nanoparticles (AuNPs) functionalized with charged self-assembled monolayers (deprotonated 11-mercaptoundecanoic acid). The nanoparticle core and the anchored stationary charges are jammed within the layer while the mobile counterions [N(CH3)4+] can respond to the electric field and spontaneously diffuse back to the initial positions upon removal of the field. This metal nanoparticle device is set-step free, energy consumption efficient, mechanically flexible, and analogous to bio-Ca2+ dynamics and has tunable conductance modulation capabilities at the counterion concentrations. The gradual resistive switching behavior enables us to implement several important synaptic functions such as potentiation/depression, spike voltage-dependent plasticity, spike duration-dependent plasticity, spike frequency-dependent plasticity, and paired-pulse facilitation. Finally, on the basis of the paired-pulse facilitation characteristics, the metal nanoparticle diffusive artificial synapse is used for edge extraction with exhibits excellent performance.

Single-Particle Photothermal Circular Dichroism and Photothermal Magnetic Circular Dichroism Microscopy.

Recent advances in single-particle photothermal circular dichroism (PT CD) and photothermal magnetic circular dichroism (PT MCD) microscopy have shown strong promise for diverse applications in chirality and magnetism. Photothermal circular dichroism microscopy measures direct differential absorption of left- and right-circularly polarized light by a chiral nanoobject and thus can measure a pure circular dichroism signal, which is free from the contribution of circular birefringence and linear dichroism. Photothermal magnetic circular dichroism, which is based on the polar magneto-optical Kerr effect, can probe the magnetic properties of a single nanoparticle (of sizes down to 20 nm) optically. Single-particle measurements enable studies of the spatiotemporal heterogeneity of magnetism at the nanoscale. Both PT CD and PT MCD have already found applications in chiral plasmonics and magnetic nanomaterials. Most importantly, the advent of these microscopic techniques opens possibilities for many novel applications in biology and nanomaterial science.

The use of phages for the biosynthesis of metal nanoparticles and their biological applications: A review.

Nowadays, the use of biological methods of synthesis of nanoparticles as substitutes for methods that use high energy and consumption of expensive and dangerous materials is of interest to researchers all over the world. Biological methods of synthesising metal nanoparticles are very important because they are easy, affordable, safe, environmentally friendly and able to control the size and shape of nanoparticles. One of the methods that is of interest today is the use of bacteriophages as the most abundant organisms in nature in the synthesis of metal nanoparticles. Nanomaterials biosynthesized from phages have shown various clinical applications, including antimicrobial activities, biomedical sensors, drug and gene delivery systems, cancer treatment and tissue regeneration. Therefore, the purpose of this review is to investigate the biosynthesis of metal nanoparticles with phages and their biomedical applications.

Spontaneous Formation of Ultrasmall Noble Metal Nanoparticles on Cobalt-Based Layered Double Hydroxide for Electrochemical and Environmental Catalysis.

Supported noble metal nanoparticles (NMNPs) are appealing for energy and environment catalysis. To facilitate the loading of NMNPs, in situ reduction of Mn+ on the support with extra reductants/surfactants is adopted, but typically results in aggregated NMNPs with uneven size distributions or blocked active sites of the NMNPs. Herein, the use of cobalt layered double hydroxide (Co-LDH) is proposed as both support and reductant for the preparation of supported NMNPs with ultrasmall sizes and even distributions. The resultant Co-LDH-supported NMNPs exhibit excellent catalytic performance and stability. For example, Ir/Co-LDH displays a low overpotential of 188 mV (10 mA cm-2) for electrocatalytic oxygen evolution reaction and a long-term stability over 100 h (100 mA cm-2) in overall water splitting. Ru/Co-LDH can achieve a 4-nitrophenol reduction with high rate of 0.36 min-1 and S2- detection with low limit of detection (LOD) of 0.34 µm. Overall, this work provides a green and effective strategy to fabricate supported NMNPs with greatly improved catalytic performances.

A systematic overview of metal nanoparticles as alternative disinfectants for emerging SARS-CoV-2 variants.

Coronaviruses are a diverse family of viruses, and new strains can emerge. While the majority of coronavirus strains cause mild respiratory illnesses, a few are responsible for severe diseases such as Severe Acute Respiratory Syndrome (SARS) and Middle East Respiratory Syndrome (MERS). SARS-CoV-2, the virus responsible for COVID-19, is an example of a coronavirus that has led to a pandemic. Coronaviruses can mutate over time, potentially leading to the emergence of new variants. Some of these variants may have increased transmissibility or resistance to existing vaccines and treatments. The emergence of the COVID-19 pandemic in the recent past has sparked innovation in curbing virus spread, with sanitizers and disinfectants taking center stage. These essential tools hinder pathogen dissemination, especially for unvaccinated or rapidly mutating viruses. The World Health Organization supports the use of alcohol-based sanitizers and disinfectants globally against pandemics. However, there are ongoing concerns about their widespread usage and their potential impact on human health, animal well-being, and ecological equilibrium. In this ever-changing scenario, metal nanoparticles hold promise in combating a range of pathogens, including SARS-CoV-2, as well as other viruses such as norovirus, influenza, and HIV-1. This review explores their potential as non-alcoholic champions against SARS-CoV-2 and other pandemics of tomorrow. This extends beyond metal nanoparticles and advocates a balanced examination of pandemic control tools, exploring their strengths and weaknesses. The manuscript thus involves the evaluation of metal nanoparticle-based alternative approaches as hand sanitizers and disinfectants, providing a comprehensive perspective on this critical issue.

Pleurotus extract-mediated selenium and zinc nanoparticles exhibited improved yield of biofortified fruit bodies.

The current study was aimed for the generation of Pleurotus extracellular extract-mediated selenium and zinc-oxide nanoparticles (NPs). The Pleurotus djamor (PD) and Pleurotus sajor-caju (PSC) extracts were incubated with different concentrations of sodium selenate and zinc acetate to yield BioSeNPs and BioZnONPs. The NPs formation led to visual color change (brick-red and white for Se and Zn nanosols, respectively). The synthesized NPs were spherical with size of 124 and 68 nm and 84 and 91 nm for PD and PSC BioSeNPs and BioZnONPs respectively. The UV absorbance peaks were recorded at 293.2 and 292.2 nm and 365.9 and 325.5 nm for BioSeNPs and BioZnONPs derived from PD and PSC respectively. FT-IR spectroscopy indicated specific functional group adoration on metal-based NPs. On supplementation in straw, these NPs improved the fruit body yield besides enhancing their protein and Se/ Zn contents. These biofortified mushrooms could be potential dietary supplement/ nutraceutical.

Growth of metal nanoparticles in hydrocarbon atmosphere of arc discharge.

A direct current (DC) arc discharge is a widely used method for large-scale production of metal nanoparticles, core-shell particles, and carbon nanotubes. Here, the growth of iron nanoparticles is explored in a modified DC arc discharge. Iron particles are produced by the evaporation of an anode, made from low-carbon steel. Methane admixture into argon gas serves as a carbon source. Electron microscopy and elemental analysis suggest that methane and/or products of its decomposition adhere to iron clusters forming a carbon shell, which inhibits iron particle growth until its full encapsulation, at which point the iron core growth is ceased. Experimental observations are explained using an aerosol growth model. The results demonstrate the path to manipulate metal particle size in a hydrocarbon arc environment.

Nanoarchitectonics of tunable aminosalicylate sodium encapsulated gold nanoparticles enabling multi-faceted role as capping, reducing, stabilizing and colorimetric detection of metal ions.

Despite all the advancements in aqueous synthesis of gold nanoparticles, certain features like one-pot/one-step method with minimal reactants using greener solvents are still demanding. The challenge in the aqueous phase synthesis is to balance the nucleation and precise growth of nanoparticles avoiding aggregation. In this work, we report a unique versatile unexplored molecule aminosalicylate sodium (Na-4-ASA) which functions as a capping, reducing, stabilizing and more interestingly as an encapsulating agent for gold nanoparticles. This multi-faceted molecule showed excellent control in synthesizing monodisperse tunable encapsulated nanoparticles of sizes (60 nm, 53 nm and 12 nm) exhibiting absorbance bands at 560 nm, 540 nm and 520 nm respectively. XRD and FTIR validated crystalline structure and binding of Na-4-ASA onto gold nanoparticles surface respectively. Furthermore, the AuNPs were investigated for their ability to detect metal ions through colorimetric change where purification via centrifugation turned out to be a key parameter in enabling the detection. Selectivity towards Al3+ was observed with the 12 nm sized nanoparticles at 0.5 ppm metal ion concentration. The AuNPs of sizes 60 nm and 53 nm detected Al3+/Cr3+/Fe3+ and Al3+/Fe3+ respectively indicating the impact of size in heavy metal ions detection. The greater the size of AuNPs, lower is the selectivity where detection of three metal ions were observed and vice versa i.e., smaller-sized AuNPs showed high selectivity by detecting single metal ion. Also, the time duration for detection increased with decreasing size of the AuNPs. Finally, LOD for the heavy metal ions Al3+, Cr3+, and Fe3+ were calculated as 67 ppb, 78 ppb, 76 ppb respectively. .

Trace elements and metal nanoparticles: mechanistic approaches to mitigating chemotherapy-induced toxicity-a review of literature evidence.

Anticancer chemotherapy (ACT) remains a cornerstone in cancer treatment, despite significant advances in pharmacology over recent decades. However, its associated side effect toxicity continues to pose a major concern for both oncology clinicians and patients, significantly impacting treatment protocols and patient quality of life. Current clinical strategies to mitigate ACT-induced toxicity have proven largely unsatisfactory, leaving a critical unmet need to block toxicity mechanisms without diminishing ACT's therapeutic efficacy. This review aims to document the molecular mechanisms underlying ACT toxicity and highlight research efforts exploring the protective effects of trace elements (TEs) and their nanoparticles (NPs) against these mechanisms. Our literature review reveals that the primary driver of ACT toxicity is redox imbalance, which triggers oxidative inflammation, apoptosis, endoplasmic reticulum stress, mitochondrial dysfunction, autophagy, and dysregulation of signaling pathways such as PI3K/mTOR/Akt. Studies suggest that TEs, including zinc, selenium, boron, manganese, and molybdenum, and their NPs, can potentially counteract ACT-induced toxicity by inhibiting oxidative stress-mediated pathways, including NF-κB/TLR4/MAPK/NLRP3, STAT-3/NLRP3, Bcl-2/Bid/p53/caspases, and LC3/Beclin-1/CHOP/ATG6, while also upregulating protective signaling pathways like Sirt1/PPAR-γ/PGC-1α/FOXO-3 and Nrf2/HO-1/ARE. However, evidence regarding the roles of lncRNA and the Wnt/ß-catenin pathway in ACT toxicity remains inconsistent, and the impact of TEs and NPs on ACT efficacy is not fully understood. Further research is needed to confirm the protective effects of TEs and their NPs against ACT toxicity in cancer patients. In summary, TEs and their NPs present a promising avenue as adjuvant agents for preventing non-target organ toxicity induced by ACT.

Potential role of metal nanoparticles in treatment of peri-implant mucositis and peri-implantitis.

Peri-implantitis (PI), a pathological condition associated with plaque, affects the tissues around dental implants. In addition, peri-implant mucositis (PIM) is a precursor to the destructive inflammatory PI and is an inflammation of the soft tissues surrounding the dental implant. It is challenging to eradicate and regulate the PI treatment due to its limited effectiveness. Currently, there is a significant interest in the development and research of additional biocompatible materials to prevent the failure of dental implants. Nanotechnology has the potential to address or develop solutions to the significant challenge of implant failure caused by cytotoxicity and biocompatibility in dentistry. Nanoparticles (NPs) may be used as carriers for the release of medicines, as well as to make implant coatings and supply appropriate materials for implant construction. Furthermore, the bioactivity and therapeutic efficacy of metal NPs in peri-implant diseases (PID) are substantiated by a plethora of in vitro and in vivo studies. Furthermore, the use of silver (Ag), gold (Au), zinc oxide, titanium oxide (TiO2), copper (Cu), and iron oxide NPs as a cure for dental implant infections brought on by bacteria that have become resistant to several medications is the subject of recent dentistry research. Because of their unique shape-dependent features, which enhance bio-physio-chemical functionalization, antibacterial activity, and biocompatibility, metal NPs are employed in dental implants. This study attempted to provide an overview of the application of metal and metal oxide NPs to control and increase the success rate of implants while focusing on the antimicrobial properties of these NPs in the treatment of PID, including PIM and PI. Additionally, the study reviewed the potential benefits and drawbacks of using metal NPs in clinical settings for managing PID, with the goal of advancing future treatment strategies for these conditions.

Spotlight on therapeutic efficiency of green synthesis metals and their oxide nanoparticles in periodontitis.

Periodontitis, one of the most prevalent dental diseases, causes the loss of bone and gum tissue that hold teeth in place. Several bacteria, commonly present in clinically healthy oral cavities, may induce and perpetuate periodontitis when their concentration rises in the gingival sulcus. Antibacterial effect against various Gram-negative and Gram-positive bacteria, including pathogenic and drug-resistant ones, has been shown for several distinct transient metal and metal oxide NPs. Therefore, NPs may be used in biomedicine to treat periodontal problems and in nanotechnology to inhibit the development of microorganisms. Instead of using harmful chemicals or energy-intensive machinery, biosynthesis of metal and metal oxide nanoparticles (NPs) has been suggested. To produce metal and metal oxide NPs, the ideal technique is "Green" synthesis because of its low toxicity and safety for human health and the environment. Gold NPs (AuNPs) appear to be less toxic to mammalian cells than other nanometals because their antibacterial activity is not dependent on reactive oxygen species (ROS). AgNPs also possess chemical stability, catalytic activity, and superior electrical and thermal conductivity, to name a few of their other advantageous characteristics. It was observed that zinc oxide (ZnO) NPs and copper (Cu) NPs exhibited discernible inhibitory effects against gram-positive and gram-negative bacterial strains, respectively. ZnO NPs demonstrated bactericidal activity against the microorganisms responsible for periodontitis. Medications containing magnetic NPs are highly effective against multidrug-resistant bacterial and fungal infections. The titanium dioxide (TiO2) NPs are implicated in elevating salivary peroxidase activity in individuals diagnosed with chronic periodontitis. Furthermore, specific metallic NPs have the potential to enhance the antimicrobial efficacy of periodontitis treatments when combined. Therefore, these NPs, as well as their oxide NPs, are only some of the metals and metal oxides that have been synthesized in environmentally friendly ways and shown to have therapeutic benefits against periodontitis.

A comprehensive review on Moringa oleifera nanoparticles: importance of polyphenols in nanoparticle synthesis, nanoparticle efficacy and their applications.

Moringa oleifera is one of the popular functional foods that has been tremendously exploited for synthesis of a vast majority of metal nanoparticles (NPs). The diverse secondary metabolites present in this plant turn it into a green tool for synthesis of different NPs with various biological activities. In this review, we discussed different types of NPs including silver, gold, titanium oxide, iron oxide, and zinc oxide NPs produced from the extract of different parts of M. oleifera. Different parts of M. oleifera take a role as the reducing, stabilizing, capping agent, and depending on the source of extract, the color of solution changes within NP synthesis. We highlighted the role of polyphenols in the synthesis of NPs among major constituents of M. oleifera extract. The different synthesis methods that could lead to the formation of various sizes and shapes of NPs and play crucial role in biomedical application were critically discussed. We further debated the mechanism of interaction of NPs with various sizes and shapes with the cells, and further their clearance from the body. The application of NPs made from M. oleifera extract as anticancer, antimicrobial, wound healing, and water treatment agent were also discussed. Small NPs show better antimicrobial activity, while they can be easily cleared from the body through the kidney. In contrast, large NPs are taken by the mono nuclear phagocyte system (MPS) cells. In case of shape, the NPs with spherical shape penetrate into the bacteria, and show stronger antibacterial activity compared to the NPs with other shapes. Finally, this review aims to correlate the key characteristics of NPs made from M. oleifera extract, such as size and shape, to their interactions with the cells for designing and engineering them for bio-applications and especially for therapeutic purposes.

Green synthesis of silver and iron oxide nanoparticles mediated photothermal effects on Blastocystis hominis.

The evolution of parasite resistance to antiparasitic agents has become a serious health issue indicating a critical and pressing need to develop new therapeutics that can conquer drug resistance. Nanoparticles are novel, promising emerging drug carriers that have demonstrated efficiency in treating many parasitic diseases. Lately, attention has been drawn to a broad-spectrum nanoparticle capable of converting absorbed light into heat via the photothermal effect phenomenon. The present study is the first to assess the effect of silver nanoparticles (Ag NPs) and iron oxide nanoparticles (Fe3O4 NPs) as sole agents and with the combined action of the light-emitting diode (LED) on Blastocystis hominins (B. hominis) in vitro. Initially, the aqueous synthesized nanoparticles were characterized by UV-Vis spectroscopy, zeta potential, and transmission electron microscopy (TEM). The anti-blastocyst efficiency of these NPs was tested separately in dark conditions. As these NPs have a wide absorption spectrum in the visible regions, they were also excited by a continuous wave LED of wavelength band (400-700 nm) to test the photothermal effect. The sensitivity of B. hominis cysts was evaluated using scanning laser confocal microscopy whereas the live and dead cells were accurately segmented based on superpixels and the k-mean clustering algorithm. Our findings showed that this excitation led to hyperthermia that induced a significant reduction in the number of cysts treated with photothermally active NPs. The results of this study elucidate the potential role of photothermally active NPs as an effective anti-blastocystis agent. By using this approach, new therapeutic antiparasitic agents can be developed.

Nanoscale potassium sensing based on valinomycin-anchored fluorescent gold nanoclusters.

Gold nanoclusters are a smart platform for sensing potassium ions (K+). They have been synthesized using bovine serum albumin (BSA) and valinomycin (Val) to protect and cap the nanoclusters. The nanoclusters (Val-AuNCs) produced have a red emission at 616 nm under excitation with 470 nm. In the presence of K+, the valinomycin polar groups switch to the molecule's interior by complexing with K+, forming a bracelet structure, and being surrounded by the hydrophobic exterior conformation. This structure allows a proposed fluorometric method for detecting K+ by switching between the Val-AuNCs' hydrophilicity and hydrophobicity, which induces the aggregation of gold nanoclusters. As a result, significant quenching is seen in fluorescence after adding K+. The quenching in fluorescence in the presence of K+ is attributed to the aggregation mechanism. This sensing technique provides a highly precise and selective sensing method for K+ in the range 0.78 to 8 µM with LOD equal to 233 nM. The selectivity of Val-AuNCs toward K+ ions was investigated compared to other ions. Furthermore, the Val-AuNCs have novel possibilities as favorable sensor candidates for various imaging applications. Our detection technique was validated by determining K+ ions in postmortem vitreous humor samples, which yielded promising results.

Dual-emission ciprofloxacin-gold nanoclusters enable ratiometric sensing of Cu2+, Al3+, and Hg2.

An innovative triple optical sensor is presented that utilizes gold nanoclusters (GNCs) stabilized with ciprofloxacin (CIP) and bovine serum albumin (BSA). The sensor is designed to identify three critical metal ions, namely Cu2+, Al3+, and Hg2+. Under 360 nm excitation, the synthesized CIP-BSA-GNCs demonstrate dual fluorescence emission with peaks at 448 nm (blue) and 612 nm (red). The red emission is associated with the interior of the CIP-BSA-GNCs, whereas the blue emission results from the surface-bound CIP molecules. The sensitive and selective fluorescent nanosensor CIP-BSA-GNCs were employed to detect Cu2+, Al3+, and Hg2+ ions. Cu2+ effectively quenched the fluorescence intensity of the CIP-BSA-GNCs at both peaks via the internal charge transfer mechanism (ICT). Cu2+ could be detected within the concentration range 1.13 × 10-3 to 0.05 µM, with a detection limit of 0.34 nM. Al3+ increased the intensity of CIP fluorescence at 448 nm via the chelation-induced fluorescence enhancement mechanism. The fluorescence intensity of the core CIP-BSA-GNCs at 612 nm was utilized as a reference signal. Thus, the ratiometric detection of Al3+ succeeded with a limit of detection of 0.21 nM within the dynamic range 0.69 × 10-3 to 0.07 µM. Hg2+ effectively quenched the fluorescence intensity of the CIP-BSA-GNCs at 612 nm via the metallophilic interaction mechanism. The fluorescence intensity of CIP molecules at 448 nm was utilized as a reference signal. This allowed for the ratiometric detection of Hg2+ with a detection limit of 0.7 nM within the concentration range 2.3 × 10-3 to 0.1 µM.

Bioactive nanoparticles derived from marine brown seaweeds and their biological applications: a review.

The biosynthesis of novel nanoparticles with varied morphologies, which has good implications for their biological capabilities, has attracted increasing attention in the field of nanotechnology. Bioactive compounds present in the extract of fungi, bacteria, plants and algae are responsible for nanoparticle synthesis. In comparison to other biological resources, brown seaweeds can also be useful to convert metal ions to metal nanoparticles because of the presence of richer bioactive chemicals. Carbohydrates, proteins, polysaccharides, vitamins, enzymes, pigments, and secondary metabolites in brown seaweeds act as natural reducing, capping, and stabilizing agents in the nanoparticle's synthesis. There are around 2000 species of seaweed that dominate marine resources, but only a few have been reported for nanoparticle synthesis. The presence of bioactive chemicals in the biosynthesized metal nanoparticles confers biological activity. The biosynthesized metal and non-metal nanoparticles from brown seaweeds possess different biological activities because of their different physiochemical properties. Compared with terrestrial resources, marine resources are not much explored for nanoparticle synthesis. To confirm their morphology, characterization methods are used, such as absorption spectrophotometer, X-ray diffraction, Fourier transforms infrared spectroscopy, scanning electron microscope, and transmission electron microscopy. This review attempts to include the vital role of brown seaweed in the synthesis of metal and non-metal nanoparticles, as well as the method of synthesis and biological applications such as anticancer, antibacterial, antioxidant, anti-diabetic, and other functions.

Preliminary In Vitro Evaluation of Silver, Copper and Gold Nanoparticles as New Antimicrobials for Pathogens That Induce Bovine Locomotion Disorders.

Lameness is a crucial problem in dairy farming. It worsens the welfare of cattle, reduces the milk yield, and causes economic losses. The etiology of lameness is varied and the cattle's condition may be infectious or non-infectious. The aim of this research was to analyze the biocidal properties of silver (AgNPs), gold (AuNPs), and copper (CuNPs) nanoparticles against bacteria causing lameness in cattle. The isolated pathogens used were Aerococcus viridans, Corynebacterium freneyi, Corynebacterium xerosis, and Trueperella pyogenes. The tested concentrations of nanoparticles were 50, 25, 12.5, 6.25, 3.125, and 1.56 mg/L. The methods used included the isolation of pathogens using standard microbiological procedures and their identification using mass spectrometry, physicochemical analysis, transmission electron microscopy, and cytotoxicity tests. Studies have shown that AgNPs at 3.125 and 1.56 mg/L concentrations, and CuNPs at 25 and 12.5 mg/L concentrations, have strong biocidal properties, while AuNPs have the weakest antimicrobial properties. The very limited number of in vivo studies focusing on lameness prevention in cattle indicate that new solutions need to be developed. However, further studies are necessary to evaluate if nanoparticles (NPs) may, in the future, become components of innovative biocides used to prevent lameness in dairy cattle.