Broadband Achromatic Imaging of a Metalens with Optoelectronic Computing Fusion.

The remarkable ultrathin ability of metalenses gives them potential as a next-generation imaging candidate. However, the inherent chromatic aberration of metalenses restricts their widespread application. We present an achromatic metalens with optoelectronic computing fusion (OCF) to mitigate the impact of chromatic aberration and simultaneously avoid the significant challenges of nanodesign, nanofabrication, and mass production of metalenses, a method different from previous methods. Leveraging the nonlinear fitting, we demonstrate that OCF can effectively learn the chromatic aberration mapping of metalens and thus restore the chromatic aberration. In terms of the peak signal-to-noise ratio index, there is a maximum improvement of 12 dB, and ∼8 ms is needed to correct the chromatic aberration. Furthermore, the edge extraction of images and super-resolution reconstruction that effectively enhances resolution by a factor of 4 are also demonstrated with OCF. These results offer the possibility of applications of metalenses in mobile cameras, virtual reality, etc.

A Fully Metaoptical Zoom Lens with a Wide Range.

Metalenses are typically designed for a fixed focal length, restricting their functionality to static scenarios. Various methods have been introduced to achieve the zoom function in metalenses. These methods, however, have a very limited zoom range, or they require additional lenses to achieve direct imaging. Here, we demonstrate a zoom metalens based on axial movement that performs both the imaging and the zoom function. The key innovation is the use of a polynomial phase profile that mimics an aspheric lens, which allows an extended depth of focus, enabling a large zoom range. Experimental results show that this focal length variation, combined with the extended depth of focus, translates into an impressive zoom range of 11.9× while maintaining good imaging quality. We see applications for such a zoom metalens in surveillance cameras of drones or microrobots to reduce their weight and volume, thus enabling more flexible application scenarios.

Metalens for Accelerated Optoelectronic Edge Detection under Ambient Illumination.

Analog systems may allow image processing, such as edge detection, with low computational power. However, most demonstrated analog systems, based on either conventional 4-f imaging systems or nanophotonic structures, rely on coherent laser sources for illumination, which significantly restricts their use in routine imaging tasks with ambient, incoherent illumination. Here, we demonstrated a metalens-assisted imaging system that can allow optoelectronic edge detection under ambient illumination conditions. The metalens was designed to generate polarization-dependent optical transfer functions (OTFs), resulting in a synthetic OTF with an isotropic high-pass frequency response after digital subtraction. We integrated the polarization-multiplexed metalens with a polarization camera and experimentally demonstrated single-shot edge detection of indoor and outdoor scenes, including a flying airplane, under ambient sunlight illumination. The proposed system showcased the potential of using polarization multiplexing for the construction of complex optical convolution kernels toward accelerated machine vision tasks such as object detection and classification under ambient illumination.

Achromatic and Coma-Corrected Hybrid Meta-Optics for High-Performance Thermal Imaging.

Long-wave infrared (LWIR) imaging, or thermal imaging, is widely applied in night vision and security monitoring. However, the widespread use of LWIR imagers is impeded by their bulky size, considerable weight, and high cost. While flat meta-optics present a potential solution to these limitations, existing pure LWIR meta-optics face constraints such as severe chromatic or coma aberrations. Here, we introduce an approach utilizing large-scale hybrid meta-optics to address these challenges and demonstrate the achromatic, coma-corrected, and polarization-insensitive thermal imaging. The hybrid metalens doublet is composed of a metasurface corrector and a refractive lens, featuring a full field-of-view angle surpassing 20° within the 8-12 µm wavelength range. Employing this hybrid metalens doublet, we showcase high-performance thermal imaging capabilities both indoors and outdoors, effectively capturing ambient thermal radiation. The proposed hybrid metalens doublet holds considerable promise for advancing miniaturized, lightweight, and cost-effective LWIR optical imaging systems.

Stretchable Ultrasound Metalens for Biomedical Zoom Imaging and Bone Quality Assessment with Subwavelength Resolution.

Ultrasound imaging is extensively used in biomedical science and clinical practice. Imaging resolution and tunability of imaging plane are key performance indicators, but both remain challenging to be improved due to the longer wavelength compared with light and the lack of zoom lens for ultrasound. Here, the ultrasound zoom imaging based on a stretchable planar metalens that simultaneously achieves the subwavelength imaging resolution and dynamic control of the imaging plane is reported. The proposed zoom imaging ultrasonography enables precise bone fracture diagnosis and comprehensive osteoporosis assessment. Millimeter-scale microarchitectures of the cortical bones at different depths can be selectively imaged with a 0.6-wavelength resolution. The morphological features of bone fractures, including the shape, size and position, are accurately detected. Based on the extracted ultrasound information of cancellous bones with healthy matrix, osteopenia and osteoporosis, a multi-index osteoporosis evaluation method is developed. Furthermore, it provides additional biological information in aspects of bone elasticity and attenuation to access the comprehensive osteoporosis assessment. The soft metalens also features flexibility and biocompatibility for preferable applications on wearable devices. This work provides a strategy for the development of high-resolution ultrasound biomedical zoom imaging and comprehensive bone quality diagnosis system.

Ultrathin Tunable Optomechanical Metalens.

Reconfigurable metasurfaces offer great promises to enhance photonics technology by combining integration with improved functionalities. Recently, reconfigurability in otherwise static metasurfaces has been achieved by modifying the electric permittivity of the meta-atoms themselves or their immediate surrounding. Yet, it remains challenging to achieve significant and fast tunability without increasing bulkiness. Here, we demonstrate an ultrathin tunable metalens whose focal distance can be changed through optomechanical control with moderate continuous wave intensities. We achieve fast focal length changes of more than 5% with response time of the order of 10 µs.

Scannable Dual-Focus Metalens with Hybrid Phase.

Metalenses with two foci in the longitudinal or transverse direction, called bifocal or dual-focus metalenses, are promising building blocks in tomography techniques, data storage, and optical tweezers. For practical applications, relative movement between the beam and specimen is required, and beam scanning is highly desirable for high-speed operation without vibration. However, dual-focus metalenses employ a hyperbolic phase that experiences off-axis aberrations, which is not suitable for beam scanning. Here, we demonstrated a scannable dual-focus metalens by employing a new phase called "hybrid phase". The hybrid phase consists of a hyperbolic phase inside and a quadratic phase outside to reduce off-axis aberrations while maintaining a high numerical aperture. We show that the two foci of the scannable dual-focus metalens move together without severe distortion for incident angles of up to 2.5°. Our design easily extends to the case of multifocusing, which is essential for various applications ranging from imaging to manipulation.

High-Efficiency, 80 mm Aperture Metalens Telescope.

Metalenses promise potential for a paradigm shift of conventional optical devices. However, the aperture sizes of metalenses are usually bound within hundreds of micrometers by the commonly used fabrication methods, limiting their usage on practical optical devices like telescopes. Here, for the first time, we demonstrate a high-efficiency, single-lens, refractive metalens telescope. We developed a mass production-friendly workflow for fabricating wafer-scale (80 mm aperture) metalenses using deep-ultraviolet (DUV) photolithography. Our metalens works in the near-infrared region with nearly diffraction-limited focal spot sizes and a high peak focusing efficiency of 80.84% at 1450 nm experimentally. Based on the metalens, we built a single-lens telescope and acquired images of the lunar surface, revealing its geographical structures. We believe our demonstration of the metalens telescope proves the exciting potential lying in the metasurfaces and could bring new possibilities for areas involving large optical systems, including geosciences, planetary observation, and astrophysical science.

Trichannel Spin-Selective Metalenses.

Metalenses have the potential to revolutionize optical devices into the next generation of consumer devices. Through new inventive strategies, metalenses with advanced functionalities have been released to integrate multiple responses into a single flat device. Here, we design metalenses that are sensitive to the incident spin angular momentum to provide three distinct modes based on the handedness of the incident and transmitted light. Propagation phase is employed to encode a hyperbolic lens phase to the metalens, while geometric phase is exploited for additional spin-selective properties. We experimentally demonstrate two different metalenses: the co-polarized channels function as a standard metalens, while the cross-polarized channels (1) deflect and (2) introduce orbital angular momentum to the transmitted light. We experimentally characterize the metalenses and prove their use for spin-selective imaging of visible light. We envision that such trichannel metalenses could be employed in chiral bioimaging, optical computing, and computer vision.

High-Resolution Metalens Imaging with Sequential Artificial Intelligence Models.

An analysis of the optical response of a GaN-based metalens was conducted alongside the utilization of two sequential artificial intelligence (AI) models in addressing the occasional issues of blurriness and color cast in captured images. The optical loss of the metalens in the blue spectral range was found to have resulted in the color cast of images. Autoencoder and CodeFormer sequential models were employed in order to correct the color cast and reconstruct image details, respectively. Said sequential models successfully addressed the color cast and reconstructed details for all of the allocated face image categories. Subsequently, the CIE 1931 chromaticity diagrams and peak signal-to-noise ratio analysis provided numerical evidence of the AI models' effectiveness in image reconstruction. Furthermore, the AI models can still repair the image without blue information. Overall, the integration of metalens and artificial intelligence models marks a breakthrough in enhancing the performance of full-color metalens-based imaging systems.

High-Resolution Metalens Imaging Polarimetry.

Imaging polarimeters find many critical applications in applications ranging from remote sensing to biological detection. Metasurfaces have been proposed as a compact approach for imaging polarimeters, but prior strategies suffer from low imaging resolution. Here, we propose an interleaved metalens configuration for polarization imaging where three-row metasurface units within a group individually interact with three pairs of orthogonal polarization channels. The optical paths between the object and adjacent three-row metasurfaces are nearly equal, allowing the construction of a metalens polarimeter with an unlimited numerical aperture (NA), which is beneficial for high-resolution polarization imaging. The metalens polarimeter fabricated by crystalline silicon nanostructures has a NA of 0.51 at 632.8 nm and achieves an imaging resolution of up to a 1.2-fold wavelength. Polarimetric microscopy experiments demonstrate that metalens polarimeters can realize high-resolution polarization imaging for various microscopic samples. This study offers a promising solution for high-resolution metasurface polarization imaging, with the potential for widespread applications.

Varifocal Metalenses: Harnessing Polarization-Dependent Superposition for Continuous Focal Length Control.

Traditional varifocal lenses are bulky and mechanically complex. Emerging active metalenses promise compactness and design flexibility but face issues like mechanical tuning reliability and nonlinear focal length tuning due to additional medium requirements. In this work, we propose a varifocal metalens design based on superimposing light intensity distributions from two orthogonal polarization states. This approach enables continuous and precise focal length control within the visible spectrum, while maintaining relatively high focusing efficiencies (∼41% in simulation and ∼28% in measurement) and quality. In experimental validation, the metalens exhibited flexible tunability, with the focal length continuously adjustable between two spatial positions upon variation of the incident polarization angle. The MTF results showed high contrast reproduction and sharp imaging, with a Strehl ratio of >0.7 for all polarization angles. With compactness, design flexibility, and high focusing quality, the proposed varifocal metalens holds potential for diverse applications, advancing adaptive and versatile optical devices.

Folded Digital Meta-Lenses for on-Chip Spectrometer.

In-plane diffractive optical networks based on meta-surfaces are promising for on-chip application. The design constraints of regular antenna unit place ultimate limits on the functionalities of the meta-systems. This fundamental limitation has been reflected by the large footprints of cascaded meta-surfaces. Here, we propose a digital meta-lens with a large degree of design freedom, enabling significantly improved beam focusing, collimation, and deflection capabilities. A highly dispersive and compact diffractive optical system is constructed for spectrometer via five layers of meta-lenses in a folded configuration. The device only occupies a 100 µm × 100 µm chip area on a silicon photonic platform. Sparse and continuous spectra reconstruction is achieved over a 35 nm bandwidth. Fine spectral lines separated by 0.14 nm are resolved. In addition to such a compact and high-resolution on-chip spectrometer, it is also expected to be promising for imaging, optical computing, and other applications due to the great versatility of the digital lens design.

Miniature Two-Photon Microscopic Imaging Using Dielectric Metalens.

Miniature two-photon microscopy has emerged as a powerful technique for investigating brain activity in freely moving animals. Ongoing research objectives include reducing probe weight and minimizing animal behavior constraints caused by probe attachment. Employing dielectric metalenses, which enable the use of sizable optical components in flat device structures while maintaining imaging resolution, is a promising solution for addressing these challenges. In this study, we designed and fabricated a titanium dioxide metalens with a wavelength of 920 nm and a high aspect ratio. Furthermore, a meta-optic two-photon microscope weighing 1.36 g was developed. This meta-optic probe has a lateral resolution of 0.92 µm and an axial resolution of 18.08 µm. Experimentally, two-photon imaging of mouse brain structures in vivo was also demonstrated. The flat dielectric metalens technique holds promising opportunities for high-performance integrated miniature nonlinear microscopy and endomicroscopy platforms in the biomedical field.

Silicon Fresnel Zone Plate Metalens with Subwavelength Gratings.

Metalenses are planar optical components that have demonstrated immense potential for integrated optics. In particular, they are capable of high-efficiency subwavelength focusing without the bulkiness of traditional lenses. Dielectric metalenses operating in the C-band typically employ relatively tall, amorphous silicon structures arranged in a periodic array. Phase control spanning from 0 to 2π is accessed by varying the geometry of these scattering structures. The full 2π phase range is necessary to impose a hyperbolic focusing phase profile, but this is difficult to achieve without custom fabrication practices. In this work, we propose a binary phase Fresnel zone plate metalens designed for the standard 500 nm silicon-on-insulator platform. Our design uses subwavelength gratings with trapezoidal segmentation to form concentric rings. The effective index of the grating is set with the duty cycle using a single full-etch step to form the binary phase profile of the zone plate. The metalens design can be easily tuned to achieve longer focal lengths at different wavelengths. It offers a simple platform for high-throughput wavelength-scale focusing elements in free-space optics, including for microscopy and medical imaging.

Aberration Theory of a Flat, Aplanatic Metalens Doublet and the Design of a Meta-Microscope Objective Lens.

A theoretical approach for reducing multiple monochromatic aberrations using a flat metalens doublet is proposed and verified through ray tracing simulations. The theoretical relation between the Abbe sine condition and the generalized Snell's law is revealed in the doublet system. Starting from the Abbe aplanat design, minimization conditions of astigmatism and field curvature are derived. Based on the theory, a metalens doublet is semi-analytically optimized as a compact, practical-level meta-microscope objective lens working for a target wavelength. The proposed approach also reveals how to reduce lateral chromatism for an additional wavelength. The design degree of freedom and fundamental limits of the system are both rigorously analyzed in theory and verified through ray tracing simulations. It is expected that the proposed method will provide unprecedented practical opportunities for the design of advanced compact microscopic imaging or sensing systems.

Tunable Polarization-Multiplexed Achromatic Dielectric Metalens.

Tunable metasurfaces provide a compact and efficient strategy for optical active wavefront shaping. Varifocal metalens is one of the most important applications. However, the existing tunable metalens rarely serves broadband wavelengths restricting their applications in broadband imaging and color display due to chromatic aberration. Herein, an electrically tunable polarization-multiplexed achromatic metalens integrated with twisted nematic liquid crystals (TNLCs) in the visible region is demonstrated. The phase profiles at different wavelengths under two orthogonal polarization channels are customized by the particle swarm optimization algorithm and matched with the dielectric metaunits database to achieve polarization-multiplexed achromatic performance. By combining the broadband linear polarization conversion ability of TNLC, the tunability of varifocal achromatic metalens is realized by applying different voltages. Further, the electrically tunable customized dispersion-manipulated metalens and switchable color metaholograms are demonstrated. The proposed devices will accelerate the application of metasurfaces in broadband zoom imaging, AR/VR displays and spectral detection.

Atomic-Scale Confinement and Negative Refraction of Plasmons by Twisted Bilayer Graphene.

Moiré superlattices provide in-plane quantum restriction for light-matter interactions in twisted bilayer graphene (tBLG), leading to the exotic photon-Moiré physics and potential applications for light manipulation. Recently, our experiment identified a highly confined slow surface plasmons polaritons (SPPs) mode in tBLG. Here, we demonstrate that the propagation of the slow SPPs mode in tBLG is spatially tailored and steered at deep subwavelengths. Analysis by the perturbation theory indicates that the coupling between the slow SPPs mode and the Moiré system is greatly strengthened, which regulates the wavefront at the atomic scale and makes tBLG serve as a universal optical metamaterial. Consequently, the negative refraction is achieved at the interface of monolayer graphene and tBLG, by which a metalens with a controllable focal length and an extremely high resolution up to 1/150 of wavelength is devised. Our work paves the way for constructing optical metamaterial at the atomic scale and develops future photon-Moiré interaction systems.

Cylindrical Metalens for Generation and Focusing of Free-Electron Radiation.

Metasurfaces constitute a powerful approach to generate and control light by engineering optical material properties at the subwavelength scale. Recently, this concept was applied to manipulate free-electron radiation phenomena, rendering versatile light sources with unique functionalities. In this Letter, we experimentally demonstrate spectral and angular control over coherent light emission by metasurfaces that interact with free-electrons under grazing incidence. Specifically, we study metalenses based on chirped metagratings that simultaneously emit and shape Smith-Purcell radiation in the visible and near-infrared spectral regime. In good agreement with theory, we observe the far-field signatures of strongly convergent and divergent cylindrical radiation wavefronts using in situ hyperspectral angle-resolved light detection in a scanning electron microscope. Furthermore, we theoretically explore simultaneous control over the polarization and wavefront of Smith-Purcell radiation via a split-ring-resonator metasurface, enabling tunable operation by spatially selective mode excitation at nanometer resolution. Our work highlights the potential of merging metasurfaces with free-electron excitations for versatile and highly tunable radiation sources in wide-ranging spectral regimes.

RGB Achromatic Metalens Doublet for Digital Imaging.

Chromatic aberration is a major challenge faced by metalenses. Current methods to achieve broadband achromatic operation in metalenses usually suffer from limited size, numerical aperture, and working bandwidth due to the finite group delay of meta-atoms, thus restricting the range of practical applications. Multiwavelength achromatic metalenses can overcome those limitations, making it possible to realize larger numerical aperture (NA) and sizes simultaneously. However, they usually require three layers, which increases their fabrication complexity, and have only been demonstrated in small sizes, with low numerical aperture and modest efficiencies. Here, we demonstrate a 1 mm diameter red-green-blue achromatic metalens doublet with a designed NA of 0.8 and successfully apply the metalens in a digital imaging system. This work shows the potential of the doublet metasurfaces, extending their applications to digital imaging systems such as digital projectors, virtual reality glasses, high resolution microscopies, etc.