Refining antimicrobial photodynamic therapy: effect of charge distribution and central metal ion in fluorinated porphyrins on effective control of planktonic and biofilm bacterial forms.

Antibiotic resistance represents a pressing global health challenge, now acknowledged as a critical concern within the framework of One Health. Photodynamic inactivation of microorganisms (PDI) offers an attractive, non-invasive approach known for its flexibility, independence from microbial resistance patterns, broad-spectrum efficacy, and minimal risk of inducing resistance. Various photosensitizers, including porphyrin derivatives have been explored for pathogen eradication. In this context, we present the synthesis, spectroscopic and photophysical characteristics as well as antimicrobial properties of a palladium(II)-porphyrin derivative (PdF2POH), along with its zinc(II)- and free-base counterparts (ZnF2POH and F2POH, respectively). Our findings reveal that the palladium(II)-porphyrin complex can be classified as an excellent generator of reactive oxygen species (ROS), encompassing both singlet oxygen (Φ△ = 0.93) and oxygen-centered radicals. The ability of photosensitizers to generate ROS was assessed using a variety of direct (luminescence measurements) and indirect techniques, including specific fluorescent probes both in solution and in microorganisms during the PDI procedure. We investigated the PDI efficacy of F2POH, ZnF2POH, and PdF2POH against both Gram-negative and Gram-positive bacteria. All tested compounds proved high activity against Gram-positive species, with PdF2POH exhibiting superior efficacy, leading to up to a 6-log reduction in S. aureus viability. Notably, PdF2POH-mediated PDI displayed remarkable effectiveness against S. aureus biofilm, a challenging target due to its complex structure and increased resistance to conventional treatments. Furthermore, our results show that PDI with PdF2POH is more selective for bacterial than for mammalian cells, particularly at lower light doses (up to 5 J/cm2 of blue light illumination). This enhanced efficacy of PdF2POH-mediated PDI as compared to ZnF2POH and F2POH can be attributed to more pronounced ROS generation by palladium derivative via both types of photochemical mechanisms (high yields of singlet oxygen generation as well as oxygen-centered radicals). Additionally, PDI proved effective in eliminating bacteria within S. aureus-infected human keratinocytes, inhibiting infection progression while preserving the viability and integrity of infected HaCaT cells. These findings underscore the potential of metalloporphyrins, particularly the Pd(II)-porphyrin complex, as promising photosensitizers for PDI in various bacterial infections, warranting further investigation in advanced infection models.

Improving Interface Matching in MOF-on-MOF S-Scheme Heterojunction through π-π Conjugation for Boosting Photoelectric Response.

Accelerating the migration of interfacial carriers in a heterojunction is of paramount importance for driving high-performance photoelectric responses. However, the inferior contact area and large resistance at the interface limit the eventual photoelectric performance. Herein, we fabricated an S-scheme heterojunction involving a 2D/2D dual-metalloporphyrin metal-organic framework with metal-center-regulated CuTCPP(Cu)/CuTCPP(Fe) through electrostatic self-assembly. The ultrathin nanosheet-like architectures reduce the carrier migration distance, while the similar porphyrin backbones promote reasonable interface matching through π-π conjugation, thereby inhibiting the recombination of photogenerated carriers. Furthermore, the metal-center-regulated S-scheme band alignments create a giant built-in electric field, which provides a huge driving force for efficient carrier separation and migration. Coupling with the biomimetic catalytic activity of CuTCPP(Fe), the resultant heterojunction was utilized to construct photoelectrochemical uric acid biosensors. This work provides a general strategy to enhance photoelectric responses by engineering the interfacial structure of heterojunctions.

Unraveling Meso-Substituent Steric Effects on the Mechanism of Hydrogen Evolution Reaction in NiII Porphyrin Hydrides Using DFT Method.

Substituents at the meso-site of metalloporphyrins profoundly influence the hydrogen evolution reaction (HER) mechanism. This study employs density functional theory (DFT) to computationally analyze NiII-porphyrin and its hydrides derived from tetrakis(pentafluorophenyl)porphyrin molecules, presenting stereoisomers in ortho- or para-positions. The results reveal that the spatial resistance effect of meso-substituted groups at the ortho- and para-positions induces significant changes in Ni-N bond lengths, angles, and reaction dynamics. For ortho-position substituents forming complex I, a favorable 88.88 ų spherical space was created, facilitating proton coordination and the formation of H2 molecules; conversely, para-position substituents forming complex II impeded H2 formation until bimolecular complexes arose. Molecular dynamics (MD) analysis and comparison were conducted on the intermediation products of I-H2 and (II-H)2, focusing on the configuration and energy changes. In the I-H2 products, H2 molecules underwent separation after 150 fs and overcame the 2.2 eV energy barrier. Subsequently, significant alterations in the spatial structure were observed as complex I deformed. In the case of (II-H)2, it was influenced by the distinctive "sandwich" configuration; the spatial structure necessitated overcoming a 6.7 eV energy barrier for H2 detachment and a process observed after 2400 fs.

Electrolyte Composition-Dependent Product Selectivity in CO2 Reduction with a Porphyrinic Metal-Organic Framework Catalyst.

A copper porphyrin-derived metal-organic framework electrocatalyst, FICN-8, was synthesized and its catalytic activity for CO2 reduction reaction (CO2RR) was investigated. FICN-8 selectively catalyzed electrochemical reduction of CO2 to CO in anhydrous acetonitrile electrolyte. However, formic acid became the dominant CO2RR product with the addition of a proton source to the system. Mechanistic studies revealed the change of major reduction pathway upon proton source addition, while catalyst-bound hydride (*H) species was proposed as the key intermediate for formic acid production. This work highlights the importance of electrolyte composition on CO2RR product selectivity.

Zr-Porphyrin Metal-Organic Framework as nanoreactor for boosting the formation of hydrogen clathrates.

We report the first experimental evidence for rapid formation of hydrogen clathrates under mild pressure and temperature conditions within the cavities of a zirconium-metalloporphyrin framework, specifically PCN-222. PCN-222 has been selected for its 1D mesoporous channels, high water-stability, and proper hydrophilic behavior. Firstly, we optimize a microwave (MW)-assisted method for the synthesis of nanosized PCN-222 particles with precise structure control (exceptional homogeneity in morphology and crystalline phase purity), taking advantage of MW in terms of rapid/homogeneous heating, time and energy savings, as well as potential scalability of the synthetic method. Second, we explore the relevance of the large mesoporous 1D open channels within the PCN-222 to promote the nucleation and growth of confined hydrogen clathrates. Experimental results show that PCN-222 drives the nucleation process at a lower pressure than the bulk system (1.35 kbar vs 2 kbar), with fast kinetics (minutes), using pure water, and with a nearly complete water-to-hydrate conversion. Unfortunately, PCN-222 cannot withstand these high pressures, which lead to a significant alteration of the mesoporous structure while the microporous network remains mainly unchanged.

Coupling Electron Transfer and Redox Site in Boranil Covalent Organic Framework Toward Boosting Photocatalytic Water Oxidation.

The efficient polymeric semiconducting photocatalyst for solar-driven sluggish kinetics with multielectron transfer oxygen evolution has spurred scientific interest. However, existing photocatalysts limited by π-conjugations, visible-light harvest, and charge transfer often compromise the O2 production rate. Herein, we introduced an alternative strategy involving a boranil functionalized-based fully π-conjugated ordered donor and acceptor (D-A) covalent organic frameworks (Ni-TAPP-COF-BF2 ) photocatalyst. The co-catalyst-free Ni-TAPP-COF-BF2 exhibits an excellent ~11-fold photocatalytic water oxidation rate, reaching 1404 µmol g-1 h-1 under visible light irradiation compared to pristine Ni-TAPP-COF (123 µmol g-1 h-1 ) alone and surpasses to reported organic frameworks counterpart. Both experimental and theoretical results demonstrate that the push/pull mechanism (metalloporphyrin/BF2 ) is responsible for the appropriate light-harvesting properties and extending π-conjugation through chelating BF2 moieties. This strategy benefits in narrowing band structure, improving photo-induced charge separation, and prolonged charge recombination. Further, the lower spin magnetic moment of M-TAPP-COF-BF2 and the closer d-band center of metal sites toward the Fermi level lead to a lower energy barrier for *O intermediate. Reveal the potential of the functionalization strategy and opens up an alternative approach for engineering future photocatalysts in energy conversion applications.

Nanomolar Fluorescent Detection of Guanine Using Tin Porphyrin.

5,10,15,20-tetramethoxyphenylporphyrinatotin (IV) (SnTMPP) was synthesised. SnTMPP exhibited Soret band at 432 nm and emission peaks at 629 and 682 nm. The fluorescence intensity of SnTMPP was quenched in the presence of guanine linearly in the range 4 × 10-9 M to 7.2 × 10-8 M and the quenching response was found to be stable even in the presence of other nucleosides such as adenine, cytosine, uracil, thymine, alanine, aspartic acid and ascorbic acid. The detection limit was found to be 0.17 nM and the mechanism behind the decrease in the fluorescence intensity of SnTMPP in the presence of guanine is due to dynamic quenching, which was confirmed by cyclic voltammetric studies and life time studies. The CV studies illustrates the possibilty for an electron transfer between the guanine and the electron deficient metal core of SnTMPP.

Quantitative Structure-Electrochemistry Relationship (QSER) Studies on Metal-Amino-Porphyrins for the Rational Design of CO2 Reduction Catalysts.

The quantitative structure-electrochemistry relationship (QSER) method was applied to a series of transition-metal-coordinated porphyrins to relate their structural properties to their electrochemical CO2 reduction activity. Since the reactions mainly occur within the core of the metalloporphyrin catalysts, the cluster model was used to calculate their structural and electronic properties using density functional theory with the M06L exchange-correlation functional. Three dependent variables were employed in this work: the Gibbs free energies of H*, C*OOH, and O*CHO. QSER, with the genetic algorithm combined with multiple linear regression (GA-MLR), was used to manipulate the mathematical models of all three Gibbs free energies. The obtained statistical values resulted in a good predictive ability (R2 value) greater than 0.945. Based on our QSER models, both the electronic properties (charges of the metal and porphyrin) and the structural properties (bond lengths between the metal center and the nitrogen atoms of the porphyrin) play a significant role in the three Gibbs free energies. This finding was further applied to estimate the CO2 reduction activities of the metal-monoamino-porphyrins, which will prove beneficial in further experimental developments.

Mechanism and Selectivity of Electrochemical Reduction of CO2 on Metalloporphyrin Catalysts from DFT Studies.

Electrochemical reduction of CO2 to value-added chemicals has been hindered by poor product selectivity and competition from hydrogen evolution reactions. This study aims to unravel the origin of the product selectivity and competitive hydrogen evolution reaction on [MP]0 catalysts (M = Fe, Co, Rh and Ir; P is porphyrin ligand) by analyzing the mechanism of CO2 reduction and H2 formation based on the results of density functional theory calculations. Reduction of CO2 to CO and HCOO- proceeds via the formation of carboxylate adduct ([MP-COOH]0 and ([MP-COOH]-) and metal-hydride [MP-H]-, respectively. Competing proton reduction to gaseous hydrogen shares the [MP-H]- intermediate. Our results show that the pKa of [MP-H]0 can be used as an indicator of the CO or HCOO-/H2 preference. Furthermore, an ergoneutral pH has been determined and used to determine the minimum pH at which selective CO2 reduction to HCOO- becomes favorable over the H2 production. These analyses allow us to understand the product selectivity of CO2 reduction on [FeP]0, [CoP]0, [RhP]0 and [IrP]0; [FeP]0 and [CoP]0 are selective for CO whereas [RhP]0 and [IrP]0 are selective for HCOO- while suppressing H2 formation. These descriptors should be applicable to other catalysts in an aqueous medium.

Ultrathin Two-Dimensional Metal-Organic Framework Nanosheets Based on a Halogen-Substituted Porphyrin Ligand: Synthesis and Catalytic Application in CO2 Reductive Amination.

Ultrathin two-dimensional metal-organic framework nanosheets have emerged as a promising kind of heterogeneous catalysts. Herein, we report a series of 2D porphyrinic metal-organic framework nanosheets (X-PMOF, X=F, Cl, Br), which was prepared from the self-assembly of a halogen-based porphyrin ligand X-TCPP (X-TCPP=5-(4-halogenatedphenyl)-10,15,20-tris(4-carboxyphenyl)-porphyrin) and ZrCl4 in the presence of trifluoroacetic acid as the modulating reagent. The framework of X-PMOF possessed the ftw topology as in MOF-525. The lamellar X-PMOF nanosheets with the thickness of down to 4.5 nm were assembled and aggregated into a flower-like morphology. With the introduction of iridium(III) atoms into the porphyrin rings, the resultant X-PMOF(Ir) nanosheets were prepared by a similar method. Catalytic results show that Br-PMOF(Ir) nanosheets were efficient for CO2 reduction and aminolysis, giving rise to formamides in high yields under room temperature and atmospheric pressure, and can be recycled and reused for 3 runs. The total turnover number of Br-PMOF(Ir) after 3 runs was 1644 based on Ir. Mechanistic studies disclose that the high efficiency of Br-PMOF(Ir) nanosheets was ascribed to three factors, including the superior activation capability of iridium(III) porphyrin for Si-H bonds, more active sites on the external surfaces of Br-PMOF(Ir) nanosheets, and the defects caused by unsymmetrical porphyrin ligand that increased the framework's affinity towards CO2 .

Oriented Assembly of 2D Metal-Pyridylporphyrinic Framework Films for Giant Nonlinear Optical Limiting.

The development of metal-organic frameworks (MOFs) with nonlinear optical (NLO) properties is of pronounced significance for optical devices. Herein, a series of 2D MOFs ZnTPyP(M) (TPyP = 5,10,15,20-tetrakis(4-pyridyl)porphyrin, M = Cu, Ni, Mn, H2) films with [010]-orientation growth composed of ultrathin nanosheets from a pyridylporphyrinic ligand are first obtained by using a liquid-phase epitaxial (LPE) layer-by-layer (lbl) growth approach. ZnTPyP(M) films show a giant nonlinear optical limiting (OL) response and can be modulated by tuning the type of metalloporphyrinic ligands. As a result, ZnTPyP(Cu) film exhibits the highest nonlinear absorption coefficient of 5.7 × 10-6 m/W compared to other reported NLO materials. Density functional theory calculations were consistent with the experimental results, revealing that the tunable π-π* local excitation and the increased delocalization of the metalloporphyrinic group regulate the NLO performance of ZnTPyP(M) films. These findings provide new insight into the effect of 2D porphyrinic MOFs toward the NLO response and offer new film candidates for nonlinear OL application.

Preparation of PMMA Electrospun Fibers Bearing Porphyrin Pendants and Photocatalytic Degradation of Organic Dyes.

Porphyrins have a large π-π conjugation force between molecules, and they are easy to aggregate in solution, which affects the photoelectric properties of porphyrins. Connecting porphyrins to polymer links through covalent bonds not only retains the mechanical properties and thermal stability of polymer materials, but also has the photoelectric properties and catalytic properties of porphyrins, which improves the availability of materials. In this study, first, a porphyrin ligand with double bonds in the side chain was designed and the corresponding copper and zinc complexes were synthesized by adjusting the metal ions in the center of the pyrrole ring. Then, the metalloporphyrin complexes were copolymerized with methyl methacrylate (MMA), and two metalloporphyrin/PMMA copolymers were obtained: CPTPPCu/PMMA and CPTPPZn/PMMA. The structure of the compounds was characterized by IR, 1H NMR, MS, and UV-Vis spectra. Metalloporphyrin/PMMA copolymers were prepared into electrospun fiber materials by electrospinning. The morphology of the composites was studied by SEM, and the thermal stability and optical properties of electrospun fibers were studied by TGA and FL. The catalytic activity of electrospun fiber materials for the degradation of organic dyes was studied. The results showed that the efficiency of the metalloporphyrin/PMMA copolymer in photocatalytic degradation of methylene blue (MB) was better than that of the PMMA electrospun fiber blended with metalloporphyrin.

Self-Assembly of Chiral Cyclohexanohemicucurbit[n]urils with Bis(Zn Porphyrin): Size, Shape, and Time-Dependent Binding.

In order to investigate the ability of bis(zinc octaethylporphyrin) (bis-ZnOEP) to discriminate cyclohexanohemicucurbit[n]urils (cycHC[n]) of different shapes and sizes, the self-assembly of barrel-shaped chiral cycHC[n] with bis-ZnOEP was studied by various spectroscopic methods (absorption, fluorescence, circular dichroism (CD), and NMR). While the binding of 6-membered cycHC[6] induced a tweezer-like conformation followed by the formation of anti-form of bis-ZnOEP upon further addition of cycHC[6], the interaction of 8-membered cycHC[8] is more complex and proceeds through the featured syn-to-anti conformational change of bis-ZnOEP and further intermolecular self-assembly via multiple noncovalent associations between cycHC[8] and bis-ZnOEP. Whilst bis-porphyrins are known to be effective chemical sensors able to differentiate various guests based on their chirality via induced CD, their ability to sense small differences in the shape and size of relatively large macrocycles, such as chiral cycHC[6] and cycHC[8], is scarcely examined. Both studied complexes exhibited characteristic induced CD signals in the region of porphyrin absorption upon complexation.

Energy Band Alignment and Redox-Active Sites in Metalloporphyrin-Spaced Metal-Catechol Frameworks for Enhanced CO2 Photoreduction.

Two new chemically stable metalloporphyrin-bridged metal-catechol frameworks, InTCP-Co and FeTCP-Co, were constructed to achieve artificial photosynthesis without additional sacrificial agents and photosensitizers. The CO2 photoreduction rate over FeTCP-Co considerably exceeds that obtained over InTCP-Co, and the incorporation of uncoordinated hydroxyl groups, associated with catechol, into the network further promotes the photocatalytic activity. The iron-oxo coordination chain assists energy band alignment and provides a redox-active site, and the uncoordinated hydroxyl group contributes to the visible-light absorptance, charge-carrier transfer, and CO2 -scaffold affinity. With a formic acid selectivity of 97.8 %, FeTCP-OH-Co affords CO2 photoconversion with a reaction rate 4.3 and 15.7 times higher than those of FeTCP- Co and InTCP-Co, respectively. These findings are also consistent with the spectroscopic study and DFT calculation.

Modulating the Acidic and Basic Site Concentration of Metal-Organic Framework Derivatives to Promote the Carbon Dioxide Epoxidation Reaction.

Metal-organic framework (MOF) is an ideal precursor/template for porous carbon, and its active components are uniformly doped, which can be used in energy storage and catalytic conversion fields. Metal-organic framework PCN-224 with carboxylporphyrin as the ligand was synthesized, and then Zn2+ and Co2+ ions were coordinated in the center of the porphyrin ring by post-modification. Here, PCN-224-ZnCo with different ratios of bimetallic Zn2+ /Co2+ ions were used as the precursor, and the metal-nitrogen-carbon(M-N-C) material of PCN-224-ZnCo-950 was obtained by pyrolyzing the precursor at 950 °C in Ar. Because Zn is easy to volatilize at 950 °C, the formed M-N-C materials can reflect different Co contents and different basic site concentrations. The formed material still maintains the original basic framework. With the increase of Zn2+ /Co2+ ratio in precursor, the concentration of N-containing alkaline sites in pyrolysis products gradually increase. Compared with the precursor, PCN-224-ZnCo1 -950 with Zn2+ /Co2+ =1 : 1 has greatly improved basicity and suitable acidic/ alkaline site concentration. It can be efficiently used to carbon dioxide absorption and catalyze the cycloaddition of CO2 with epoxide. More importantly, the current method of adjusting the acidic/basic sites in M-N-C materials through volatilization of volatile metals can provide an effective strategy for adjusting the catalysis of MOF derivatives with porphyrin structure.

Self-Assembly-Directed Exciton Diffusion in Solution-Processable Metalloporphyrin Thin Films.

The study of excited-state energy diffusion has had an important impact in the development and optimization of organic electronics. For instance, optimizing excited-state energy migration in the photoactive layer in an organic solar cell device has been shown to yield efficient solar energy conversion. Despite the crucial role that energy migration plays in molecular electronic device physics, there is still a great deal to be explored to establish how molecular orientation impacts energy diffusion mechanisms. In this work, we have synthesized a new library of solution-processable, Zn (alkoxycarbonyl)phenylporphyrins containing butyl (ZnTCB4PP), hexyl (ZnTCH4PP), 2-ethylhexyl (ZnTCEH4PP), and octyl (ZnTCO4PP) alkoxycarbonyl groups. We establish that, by varying the length of the peripheral alkyl chains on the metalloporphyrin macrocycle, preferential orientation and molecular self-assembly is observed in solution-processed thin films. The resultant arrangement of molecules consequently affects the electronic and photophysical characteristics of the metalloporphyrin thin films. The various molecular arrangements in the porphyrin thin films and their resultant impact were determined using UV-Vis absorption spectroscopy, steady-state and time-resolved fluorescence emission lifetimes, and X-ray diffraction in thin films. The films were doped with C60 quencher molecules and the change in fluorescence was measured to derive a relative quenching efficiency. Using emission decay, relative quenching efficiency, and dopant volume fraction as input, insights on exciton diffusion coefficient and exciton diffusion lengths were obtained from a Monte Carlo simulation. The octyl derivative (ZnTCO4PP) showed the strongest relative fluorescence quenching and, therefore, the highest exciton diffusion coefficient (5.29 × 10-3 cm2 s-1) and longest exciton diffusion length (~81 nm). The octyl derivative also showed the strongest out-of-plane stacking among the metalloporphyrins studied. This work demonstrates how molecular self-assembly can be used to modulate and direct exciton diffusion in solution-processable metalloporphyrin thin films engineered for optoelectronic and photonic applications.

Chemistry inside a Porphyrin Skeleton: Platinacyclopentadiene from Tellurophene.

Platinum(II) binds to 21,23-ditelluraporphyrin forming a side-on complex, which can be easily transformed into an aromatic metallaporphyrin, that is, 21-platina-23-telluraporphyrin, with a platinacyclopentadiene unit built in the porphyrin skeleton in place of one pyrrole ring. The central platinum(II) ion with a CCNTe square-planar coordination sphere can be oxidized to platinum(IV) by chlorine, bromine, methyl iodide or allyl chloride to yield octahedral complexes. All platinatelluraporphyrins show dynamic behavior involving the platinum ion coordination sphere fluxionality and the porphyrin skeleton deformation, both in-plane and out-of-plane, as demonstrated by 1 H NMR spectroscopy.

A Theoretical Study of Metalloporphyrin-Based Fluorescent Array Sensor using Density Functional Theory.

The influences of metal atoms on optimized geometry structures, relative energies, frontline molecular orbitals, and binding energies of metalloporphyrin-based fluorescent array sensor were systematically investigated by density functional theory (DFT) at B3LYP/LAN2DZ level. DFT calculated results reveal that the selected metal atoms in the center of the metalloporphyrin plane provide difference performances of metalloporphyrin-based fluorescent array sensor for the rapid determination of trimethylamine. The calculated binding energies have displayed in the following order at the most stable states: zinc porphyrin (ZnP) < copper porphyrin (CuP) < silver porphyrin (AgP) < iron porphyrin (FeP) < tin porphyrin (SnP) < cobalt porphyrin (CoP) < ruthenium porphyrin (RuP) < manganese porphyrin (MnP). Therefore, this theoretical study provides a design mechanism for how to choose a proper metal atom for low or high concentration trimethylamine. This research also suggests that theoretical results may be useful for the rapid detection of food containing trimethylamine.

Optimization of Insecticidal Triterpene Derivatives by Biomimetic Oxidations with Hydrogen Peroxide and Iodosobenzene Catalyzed by MnIII and FeIII Porphyrin Complexes.

Semisynthetic functionalized triterpenes (4α,14-dimethyl-5α,8α-8,9-epoxycholestan-3ß-yl acetate; 4α,14-dimethyl-5α-cholest-8-ene-3,7,11-trione; 4α,14-dimethyl-5α-cholesta-7,9(11)-dien-3-one and 4α,14-dimethyl-5α-cholest-8-en-3ß-yl acetate), previously prepared from 31-norlanostenol, a natural insecticide isolated from the latex of Euphorbia officinarum, have been subjected to oxidation with hydrogen peroxide (H2 O2 ) and iodosobenzene (PhIO) catalyzed by porphyrin complexes (cytochrome P-450 models) in order to obtain optimized derivatives with high regioselectivity. The main transformations were epoxidation of the double bonds and hydroxylations of non-activated C-H groups and the reaction products were 25-hydroxy-4α,14-dimethyl-5α-cholesta-7,9(11)-dien-3ß-yl acetate (59 %), 25-hydroxy-4α,14-dimethyl-5α-cholest-8-ene-3,7,11-trione (60 %), 4α,14-dimethyl-5α,7ß-7,8-epoxycholest-9(11)-en-3-one (22 %), 8-hydroxy-4α,14-dimethyl-5α-cholest-9(11)-ene-3,7-dione (16 %), 12α-hydroxy-4α,14-dimethyl-5α,7ß-7,8-epoxycholest-9(11)-en-3-one (16 %), and 4α,14-dimethyl-5α,8α-8,9-epoxycholestan-3ß-yl acetate (26 %), respectively. We also investigated the insect (Myzus persicae, Rhopalosiphum padi and Spodoptera littoralis) antifeedant and postingestive effects of these terpenoid derivatives. None of the compounds tested had significant antifeedant effects, however, all were more effective postingestive toxicants on S. littoralis larvae than the natural compound 31-norlanostenol, with 4α,14-dimethyl-5α,8α-8,9-epoxycholestan-3ß-yl acetate being the most active. The study of their structure-activity relationships points out at the importance of C3 and C7 substituents.

Humidity-Resistive Optical NO Gas Sensor Devices Based on Cobalt Tetraphenylporphyrin Dispersed in Hydrophobic Polymer Matrix.

We report on an optical nitrogen oxide (NO) gas sensor device using cobalt tetraphenylporphyrin (CoTPP) dispersed in three kinds of hydrophobic polymer film matrix (polystyrene (PSt), ethylcellulose (EC), and polycyclohexyl methacrylate (PCHMA)) to improve humidity resistance. Our approach is very effective because it allows us to achieve not only high humidity resistance, but also a more than sixfold increase in sensitivity compared with CoTPP film due to the high dispersion of CoTPP in the polymer film. The limit of detection was calculated as 33 ppb for the CoTPP-dispersed EC film, which is lower than that of CoTPP film (92 ppb).