Three strategy rules of filamentous fungi in hydrocarbon remediation: an overview.

Remediation of hydrocarbon contaminations requires much attention nowadays since it causes detrimental effects on land and even worse impacts on aquatic environments. Tools of bioremediation especially filamentous fungi permissible for cleaning up as much as conceivable, at least they turn into non-toxic residues with less consumed periods. Inorganic chemicals, CO2, H2O, and cell biomass are produced as a result of the breakdown and mineralization of petroleum hydrocarbon pollutants. This paper presents a detailed overview of three strategic rules of filamentous fungi in remediating the various aliphatic, and aromatic hydrocarbon compounds: utilizing carbons from hydrocarbons as sole energy, Co-metabolism manners (Enzymatic and Non-enzymatic theories), and Biosorption approaches. Upliftment in the degradation rate of complex hydrocarbon by the Filamentous Fungi in consortia scenario we can say, "Fungal Talk", which includes a variety of cellular mechanisms, including biosurfactant production, biomineralization, and precipitation, etc., This review not only displays its efficiency but showcases the field applications - cost-effective, reliable, eco-friendly, easy to culture as biomass, applicable in both land and any water bodies in operational environment cleanups. Nevertheless, the potentiality of fungi-human interaction has not been fully understood, henceforth further studies are highly endorsed with spore pathogenicity of the fungal species capable of high remediation rate, and the gene knockout study, if the specific peptides cause toxicity to any living matters via Genomics and Proteomics approaches, before application of any in situ or ex situ environments.

Use of sawdust for production of ligninolytic enzymes by white-rot fungi and pharmaceutical removal.

Use of white-rot fungi for enzyme-based bioremediation of wastewater is of high interest. These fungi produce considerable amounts of extracellular ligninolytic enzymes during solid-state fermentation on lignocellulosic materials such as straw and sawdust. We used pure sawdust colonized by Pleurotus ostreatus, Trametes versicolor, and Ganoderma lucidum for extraction of ligninolytic enzymes in aqueous suspension. Crude enzyme suspensions of the three fungi, with laccase activity range 12-43 U/L and manganese peroxidase activity range 5-55 U/L, were evaluated for degradation of 11 selected pharmaceuticals spiked at environmentally relevant concentrations. Sulfamethoxazole was removed significantly in all treatments. The crude enzyme suspension from P. ostreatus achieved degradation of wider range of pharmaceuticals when the enzyme activity was increased. Brief homogenization of the colonized sawdust was also observed to be favorable, resulting in significant reductions after a short exposure of 5 min. The highest reduction was observed for sulfamethoxazole which was reduced by 84% compared to an autoclaved control without enzyme activity and for trimethoprim which was reduced by 60%. The compounds metoprolol, lidocaine, and venlafaxine were reduced by approximately 30% compared to the control. Overall, this study confirmed the potential of low-cost lignocellulosic material as a substrate for production of enzymes from white-rot fungi. However, monitoring over time in bioreactors revealed a rapid decrease in enzymatic ligninolytic activity.

Fungal assisted bio-treatment of environmental pollutants with comprehensive emphasis on noxious heavy metals: Recent updates.

In the present time of speedy developments and industrialization, heavy metals are being uncovered in aquatic environment and soil via refining, electroplating, processing, mining, metallurgical activities, dyeing and other several metallic and metal based industrial and synthetic activities. Heavy metals like lead (Pb), mercury (Hg), cadmium (Cd), arsenic (As), Zinc (Zn), Cobalt (Co), Iron (Fe), and many other are considered as seriously noxious and toxic for the aquatic environment, human, and other aquatic lives and have damaging influences. Such heavy metals, which are very tough to be degraded, can be managed by reducing their potential through various processes like removal, precipitation, oxidation-reduction, bio-sorption, recovery, bioaccumulation, bio-mineralization etc. Microbes are known as talented bio-agents for the heavy metals detoxification process and fungi are one of the cherished bio-sources that show noteworthy aptitude of heavy metal sorption and metal tolerance. Thus, the main objective of the authors was to come with a comprehensive review having methodological insights on the novel and recent results in the field of mycoremediation of heavy metals. This review significantly assesses the potential talent of fungi in heavy metal detoxification and thus, in environmental restoration. Many reported works, methodologies and mechanistic sights have been evaluated to explore the fungal-assisted heavy metal remediation. Herein, a compact and effectual discussion on the recent mycoremediation studies of organic pollutants like dyes, petroleum, pesticides, insecticides, herbicides, and pharmaceutical wastes have also been presented.

Deciphering the role of fungus in degradation of polypropylene from hospital waste.

Health and environmental consequences are unavoidable when it comes to management of hospital waste (HW) disposables. In order to eradicate the HW, this study isolated a novel fungus SPF21 from a hospital dumping yard to degrade Polypropylene (PP). We measured the attributes of PP inoculated with fungus using mass loss, Fourier trans-form infrared (FTIR), contact angle (CA), and scanning electron microscopy (SEM). The weight of PP exposed to SPF21 was reduced by 25% in 90 days. The SEM images reveal that there are pores all over the sample surface; they alsocaused voids during the biodegradation of PP. FTIR analysis indicates that the spectra of treated mask pieces show the absence of peak at 1746 cm-1 and the appearance of a new peak at 1643 cm-1 . A period of 90-day exposure to the fungal isolate SPF21 reduced the CA of PP by 44.8% when compared to the nonexposed PP samples, suggesting that the surface of PP turned more hydrophilic after exposure. Moreover, our study on PP degradation by the fungus Ascotricha sinuosa SPF21 appears to be promising from the perspective of environmental, health, and economic hazards. Our results indicate that biodegradation greatly facilitates fungus deposition and changes PP film morphology and hydrophilicity.

Fungal bioproducts for petroleum hydrocarbons and toxic metals remediation: recent advances and emerging technologies.

Petroleum hydrocarbons and toxic metals are sources of environmental contamination and are harmful to all ecosystems. Fungi have metabolic and morphological plasticity that turn them into potential prototypes for technological development in biological remediation of these contaminants due to their ability to interact with a specific contaminant and/or produced metabolites. Although fungal bioinoculants producing enzymes, biosurfactants, polymers, pigments and organic acids have potential to be protagonists in mycoremediation of hydrocarbons and toxic metals, they can still be only adjuvants together with bacteria, microalgae, plants or animals in such processes. However, the sudden accelerated development of emerging technologies related to the use of potential fungal bioproducts such as bioinoculants, enzymes and biosurfactants in the remediation of these contaminants, has boosted fungal bioprocesses to achieve higher performance and possible real application. In this review, we explore scientific and technological advances in bioprocesses related to the production and/or application of these potential fungal bioproducts when used in remediation of hydrocarbons and toxic metals from an integral perspective of biotechnological process development. In turn, it sheds light to overcome existing technological limitations or enable new experimental designs in the remediation of these and other emerging contaminants.

Synergistic impact of two autochthonous saprobic fungi (A. niger and T. pseudokoningii) on the growth, ionic contents, and metals uptake in Brassica juncea L. and Vigna radiata L. under tannery solid waste contaminated soil.

Unrestricted disposal of tannery solid waste (TSW) into agricultural soils has resulted in the contamination of heavy metals (HMs) such as chromium (Cr) cadmium (Cd), Copper (Cu), and Zinc (Zn) along with the severe potential to degrade the environmental quality around the world. In the present study, a combined phyto- and myco-remediation strategy was evaluated to enhance the growth, ionic contents, and phytoextraction potential of Brassica juncea and Vigna radiata for HMs from TSW-contaminated soil. A pot experiment was conducted in the greenhouse using single or combined inoculation of Trichoderma pseudokoningii (Tp) and Aspergillus niger (An) in B. juncea and V. radiata under TSW-contaminated soil at different doses (0, 50, and 100%). The results showed that the growth parameters of both B. juncea and V. radiata were severely affected under 50 and 100% TSW treatment. The combined inoculation of both the fungal species ameliorated the positive impacts of 50 and 100% TSW application on growth and ionic contents accumulation in B. juncea and V. radiata. The combined application of An + Tp at 100% TSW enhanced the shoot length (87.8, 157.2%), root length (123.9, 120.6%), number of leaves (184.2, 175.0%), number of roots (104.7, 438.9%), and dry weight (179.4, 144.8%) of B. juncea and V. radiata, respectively as compared to control with any fungal treatment at 100% TSW. A single application of An at different doses of TSW enhanced the metal concentration in B. juncea, whereas Tp increased the concentration of the metals in V. radiata. The concentration of Cr in roots (196.2, 263.8%), shoots (342.4, 182.2%), Cu in roots (187.6, 137.0%), shoots (26.6, 76.0%), Cd in roots (245.2, 184.6%), shoots (142.1, 73.4%), Zn in roots (73.4, 57.5%), shoots (62.9, 57.6%), in B. juncea were increased by the application of An at 50 and 100% treatment levels of TSW, respectively compared to control (C). Moreover, the HMs (Cr, Cu, Cd, and Zn) uptake was also improved under 50 and 100% TSW with the combined inoculation of Tp + An in both B. juncea and V. radiata. In conclusion, the combined inoculation of Tp + An was more effective in metal removal from TSW-treated soil.NOVELTY STATEMENTLimited studies have been conducted on filamentous fungi systematically under metal-contaminated sites for their diversity, metal tolerance, and their potential in enhancing the phytoremediation potential of different crop plants.In the present study, single and/or combined inoculation of fungal strains was found effective in alleviating different metals stress in tannery solid waste contaminated soil by improving defense mechanisms and plant growth due to the association between fungal strains and plants.The combined application of both fungal strains had an additive effect in enhancing the bioaccumulation capacity of B. juncea and V. radiata compared to their single inoculation.

Molecular advances in mycoremediation of polycyclic aromatic hydrocarbons: Exploring fungal bacterial interactions.

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous high global concern environmental pollutants and tend to bioaccumulate due to hydrophobic properties. These xenobiotics, having variable concentrations along different matrices, gradually undergo various physical, chemical, and biological transformation processes. Myco-remediation aids accelerated degradation by effectively transforming complex ring structures to oxidized/hydroxylated intermediates, which can further funnel to bacterial degradation pathways. Exploitation of such complementing fungal-bacterial enzymatic activity can overcome certain limitations of incomplete bioremediation process. Furthermore, high-throughput molecular methods can be employed to unveil community structure, taxon abundance, coexisting community interactions, and metabolic pathways under stressed conditions. The present review critically discusses the role of different fungal phyla in PAHs biotransformation and application of fungal-bacterial cocultures for enhanced mineralization. Moreover, recent advances in bioassays for PAH residue detection, monitoring, developing xenobiotics stress-tolerant strains, and application of fungal catabolic enzymes are highlighted. Application of next-generation sequencing methods to reveal complex ecological networks based on microbial community interactions and data analysis bias in performing such studies is further discussed in detail. Conclusively, the review underscores the application of mixed-culture approach by critically highlighting in situ fungal-bacterial community nexus and its role in complete mineralization of PAHs for the management of contaminated sites.

Assessing three industrially produced fungi for the bioremediation of diclofenac.

Diclofenac is an emerging pollutant: toxic, persistent, and bioaccumulative, present in several environmental niches in a concentration of parts per million. This pharmaceutical's biological removal was reported with various fungal species, showing promissory results. This work aimed at diclofenac removal by individually challenging the fungal species Pleurotus ostreatus, Aspergillus niger, and Penicillium roquefortii but triying to lower the biosorption nature of cell walls by NaCl addition. P. ostreatus removed 100% of the initial diclofenac concentration, whereas A. niger and P. roqueforti removed 74% and 32%, respectively. In all three cases, biosorption by polar interactions was negligible. We demonstrated that stressful environments, such as mineral media, force the fungus to take advantage of its metabolic tools to survive, hence showing higher removal capacity when limiting growth conditions. Bioremediation is an excellent alternative to give residual fungal biomass a secondary use.

Isolation of Hexavalent chromium tolerant fungal species from urban vegetable farm soil and effluent waste in Addis Ababa& Rift valley, Ethiopia.

Hexavalent chromium is resistant to degradation and harmful toxic substance to environment and community health. Physicochemical treatment methods are demanding high cost, used large quantities of chemicals & energy, release large amount of secondary toxic degradants. Mycoremediation is an eco-friendly alternative treatment method. The main objective of this research is to isolate and characterize chrome (VI) tolerant fungi from farm soil & industry effluent for mycoremedation purpose. The screening and isolation of yeast was carried out on potato dextrose agar media. PDA and broth assay test for fungi tolerance to hexavalent chromium at different concentration, temperature and pH was evaluated. Fungi species was identified biochemically using Biolog Microstation depending on carbon utilization and chemical sensitivity test. The result revealed that 10 yeast species was identified with full ID from effluent waste and farm soil based on their probability ≥  75% and similarity index ≥  0.5 as well as their Cr (VI) tolerance ability up to 2500 ppm. These are Yarrowia lipolytica (100%, 0.7), Cryptococcus luteolus(100%, 0.64), Rhodotorula aurantiaca A(100%, 0.62), Ustilago maydis(100%, 0.58) Trichosporon beigelii B (100%, 0.51), Cryptococcus terreus A (100%, 0.62), Zygosaccharomyces bailii (98%, 0.65), Nadsoniafulvenscens (90%, 0.62), Schizoblastosporonstarkeyihenricii (89%, 0.56), Endomycopsis vivi (84%, 0.62), Rhodotorula pustula (Sim, 0.59). Two yeast species Yarrowia lipolytica and Nadsoniafulvenscens show the highest growth mean Optical density (OD) measure 0.74 ± 0.2 & 0.60 ± 0.2 respectively at pH 7 & 25 °C. The highest tolerance index (mm) was recorded by Schizoblastosporon starkey henricii 0.3067 ± 0.152. Cr (VI)-tolerance ability of these yeast strains used in the development of chromium-bioremediation technologies provide an alternative option for chromium sequestration after HPLC analysis& molecular characterization.

Evaluating the efficacy of wood decay fungi and synthetic fungal consortia for simultaneous decolorization of multiple textile dyes.

Wastewater from the textile industry dyeing process containing high loads of synthetic dyes leads to pollution of water with these toxic and genotoxic dyes. Much effort has been put towards developing biological systems to resolve this issue. Mycoremediation is a well-known approach using fungi to remove, degrade, or remediate pollutants and can be applied to decolorize textile dyes in industrial effluent. Fungal strains from four genera of Polyporales, namely Coriolopsis sp. TBRC 2756, Fomitopsis pinicola TBRC-BCC 30881, Rigidoporus vinctus TBRC 6770, and Trametes pocas TBRC-BCC 18705, were studied for decolorization efficiency, and R. vinctus was found to exhibit the greatest activity in removing all seven tested reactive dyes and one acid dye with a decolorization efficiency of 80% or more within 7 days under limited oxygen. This fungus simultaneously degraded multiple dyes in synthetic wastewater as well as industrial effluent from the dyeing process. To enhance the decolorization rate, various fungal consortia were formulated for testing. However, these consortia only trivially improved efficiency compared with using R. vinctus TBRC 6770 alone. Evaluation of R. vinctus TBRC 6770 decolorization ability was further performed in a 15-L bioreactor to test its ability to eliminate multiple dyes from industrial effluent. The fungus took 45 days to adapt to growth in the bioreactor and subsequently reduced dye concentration to less than 10% of the initial concentration. The following six cycles required only 4-7 days to reduce dye concentrations to less than 25%, demonstrating that the system can run efficiently for multiple cycles without the need for extra medium or other carbon sources.

Mycoremediation of pretilachlor and its metabolite by Aspergillus ficuum.

Pretilachlor is one of the widely used chloroacetamide herbicides in Asian countries to control weeds in the rice field. The extensive use of herbicides has caused major concern among scientists throughout the world. Therefore, it is essential to develop an efficient method for the remediation of pretilachlor and its harmful by-products from contaminated surfaces. Mycoremediation is known to play a key role in the removal of various environmental contaminants. Hence, in the present study, strain AJN2 Aspergillus ficuum was isolated from a paddy field that was in continuous exposure to pretilachlor for over a decade. The degradation studies showed that the strain was efficiently able to degrade 73% of pretilachlor in an aqueous medium within 15 days of incubation and 70% of its major metabolite PME (2-methyl-6-ethylalanine). The GC/MS profile revealed the formation of aldehyde as the end product of degradation which was confirmed through the infrared fingerprint of the degradation sample. The ligninolytic enzyme activity studies showed that the lignin peroxidase enzyme system could be responsible for the degradation of pretilachlor and its major metabolite. The results highlight that the strain AJN2 A. ficuum could be a potential strain for the bioremediation of pretilachlor from the contaminated areas.

Degradation and detoxification of reactive yellow dyes by Scedosporium apiospermum: a mycoremedial approach.

Textile industrial effluents have long enunciated the essentiality of ascertaining an efficient wastewater treatment for the removal of azo dyes given their potential disturbances on the ecosystem. Our study investigated the efficiency of the strain SKF2 among 14 other isolates, molecularly identified to be Scedosporium apiospermum, isolated by our research group from the textile effluent sludge in the degradation of two azo dyes, Reactive Yellow 145 and Remazol Yellow RR. Kinetic profiling of the degradation process revealed the decolourisation efficiency to be 94.8 and 86.9% for RY 145 and RYRR, respectively, during the declining growth phase. Laccase and polyphenol oxidase (RY 145-2.37 and RYRR-2.30 U/mL; RY 145-3.26 and RYRR-2.89 U/mL, respectively) were found to influence the biodegradation process in both the dyes than the other examined fungal degradative enzymes. The metabolic pathway predicted with the aid of GC-MS analysis identified the degraded metabolites to be smaller molecular weight non-toxic products. Assessment of toxicity via brine shrimp lethality assay (RY 145-23.3% and RYRR-16.7%, respectively) and seed germination assay (RY 145-96.7% and RYRR-83.3%) further solidified the detoxified status of both the dyes after biodegradation. The experimental data thus substantiated the expediency of S. apiospermum SKF2 in the degradation of textile azo dyes and its further employment in the bioremediation of textile wastewaters for agricultural applications and ecological recycling.

Surfactant-aided mycoremediation of soil contaminated with polycyclic aromatic hydrocarbons.

Remediation of persistent polycyclic aromatic hydrocarbons (PAHs) contaminated soil has become a major challenge in recent years. Further, conventional application of bioaugmentation strategies for PAHs remediation require continuous supply of microbial specific nutrients, which makes these processes less feasible. Hence, the present study focused on PAHs remediation using surfactants along with wood assisted fungal system in a microcosm set up. In this study, in absence of surfactants, a saturation in PAHs degradation was noted in bioaugmentation with wood assisted fungal system (BAW) with 61 ± 1.25% degradation, followed by bioaugmentation with free fungi system (BAF) (54 ± 0.46%). However, with addition of 1500 mg/L of surface-active compounds (SAC), a maximum PAHs degradation in BAW (100%) and BAF (86 ± 1.30%) strategies were noted on 21st day. Irrespective of the strategies, presence of SAC and rhamnolipids enhanced PAHs degradation by increasing the enzymes production in Trametes hirsuta when compared to Triton x-100 and sodium dodecyl sulphate (SDS). Among the detected PAHs, 100% degradation within 17 days was noted for naphthalene and acenaphthene in SAC-supplemented BAW system. Further, ecotoxicity analysis established showed the LC50 of sediment soil at 26.5 ± 0.24%, which was reduced by an average of 71% after soil remediation. Hence, the current microcosm system proved that the application of SAC with BAW enhanced the PAHs remediation rate, which supports its application in real time soil remediation.

Vinasse odyssey: sugarcane vinasse remediation and laccase production by Trametes sp. immobilized in polyurethane foam.

Vinasse is a high pollutant liquid residue from bioethanol production. Due to its toxicity, most vinasse is used not disposed of in water bodies but employed for the fertigation of sugarcane crops, potentially leading to soil salinization or heavy metal deposition. The anaerobic digestion of vinasse for energy production is the main alternative to fertigation, but the process cannot eliminate colored compounds such as melanoidins, caramels, or phenolic compounds. The treatment of raw vinasse with white-rot fungi could remove colored and persistent toxic compounds, but is generally considered cost-ineffective. We report the treatment of vinasse by an autochthonous Trametes sp. strain immobilized in polyurethane foam and the concomitant production of high titers of laccase, a high value-added product that could improve the viability of the process. The reuse of the immobilized biomass and the discoloration of raw vinasse, the concentration of phenolic compounds, BOD and COD, and the phytotoxicity of the treated vinasse were measured to assess the viability of the process and the potential use of treated vinasse in fertigation or as a complementary treatment to anaerobic digestion. Under optimal conditions (vinasse 0.25X, 30 °C, 21 days incubation, 2% glucose added in the implantation stage), immobilized Trametes sp. causes a decrease of 75% in vinasse color and total phenolic compounds, reaching 1082 U L-1 of laccase. The fungi could be used to treat 0.50X vinasse (BOD 44,400 mg O2 L-1), causing a 26% decolorization and a 30% removal of phenolic compounds after 21 days of treatment with maximum laccase titers of 112 U L-1, while reducing COD and BOD from 103,290 to 42,500 mg O2 L-1 (59%) and from 44,440 to 21,230 mg O2 L-1 (52%), respectively. The re-utilization of immobilized biomass to treat 0.50X vinasse proved to be successful, leading to the production of 361 U L-1 of laccase with 77% decolorization, 61% degradation of phenolic compounds, and the reduction of COD and BOD by 75% and 80%, respectively. Trametes sp. also reduced vinasse phytotoxicity to Lactuca sativa seedlings. The obtained results show that the aerobic treatment of vinasse by immobilized Trametes sp. is an interesting technology that could be employed as a sole treatment for the bioremediation of vinasse, with the concomitant the production of laccase. Alternatively, the methodology could be used in combination with anaerobic digestion to achieve greater decolorization and reduction of phenolic compounds, melanoidins, and organic load.

Insights into the beneficial roles of dark septate endophytes in plants under challenging environment: resilience to biotic and abiotic stresses.

Dark septate endophytes (DSE) exert a plethora of effects in regulating plant growth, signalling and stress tolerance. The advent of metagenomics has led to the identification of various species of DSE to be associated with plant organs. They are known to modulate growth, nutrient uptake, phytohormone biosynthesis and production of active bioconstituents in several plants. The interactions between the DSE and host plants are mostly mutualistic but they can also be neutral or exhibit negative interactions. The DSE has beneficial role in removal/sequestration of toxic heavy metals from various environmental sites. Here, we discuss the beneficial role of DSE in enhancing plant tolerance to heavy metal stress, drought conditions, high salinity and protection from various plant pathogens. Furthermore, the underlying mechanism of stress resilience facilitated by DSE-plant interaction has also been discussed. The article also provides insights to some important future perspectives associated with DSE-mediated phytoremediation and reclamation of polluted land worldwide thus facilitating sustainable agriculture.

Comparative study of single cultures and a consortium of white rot fungi for polychlorinated biphenyls treatment.

AIMS: To evaluate the mycoremediation of polychlorinated biphenyls (PCBs) by either single cultures or binary consortia of Pleurotus pulmonarius LBM 105 and Trametes sanguinea LBM 023. METHODS AND RESULTS: PCBs tolerance, removal capacity, toxicity reduction and ligninolytic enzyme expression were assessed when growing single culture and binary consortium of fungus in 217 mg l-1 of a technical mixture of Aroclor 1242, 1254 and 1260 in transformer oil. A decrease in tolerance and variation in ligninolytic enzyme secretion were observed in PCB-amended solid media. Pleurotus pulmonarius LBM 105 mono-culture was able to remove up to 95·4% of PCBs, whereas binary consortium and T. sanguinea LBM 023 could biodegrade about 55% after 24 days. Significant detoxification levels were detected in all treatments by biosorption mechanism. CONCLUSIONS: Pleurotus pulmonarius LBM 105 in single culture had the best performance regarding PCBs biodegradation and toxicity reduction. Ligninolytic enzyme secretion changed in co-culture. SIGNIFICANCE AND IMPACT OF THE STUDY: The evaluation of PCBs bioremediation effectiveness of basidiomycetes consortium in terms of PCB removal, toxicity and ligninolytic enzyme production to unravel the differences between using individual cultures or consortium has not been reported. The results from this study enable the selection of P. pulmonarius LBM 105 mono-culture to bioremediate PCBs as it showed higher efficiency compared to binary consortium with T. sanguinea LBM 023 for potential decontamination of PCB-contaminated transformer oil.

De-colourization of textile effluent using immobilized Geotrichum candidum: an insight into mycoremediation.

Textile effluent is generally complicated to manage because of its extremely noxious and recalcitrant coloured compositions. Mycoremediation is an extensively used strategy for the competent degradation of hazardous pollutants present in textile effluent. Fungus could be immobilized in synthetic or natural matrices. The current study shows the decolourization of the textile effluent by 85·5 and 98·5% within 6 h using suspended and immobilized fungus, Geotrichum candidum with optimized parameters like inoculum size (5%), pH (4·5), and temperature (30°C). To maintain a high biomass of fungal population and enhance the retention of fungal strain in the contaminated sites, the fungi need to be immobilized. Hence, the fungus was immobilized naturally onto the selected inert support that is, coconut fibres by the means of adsorption, where they grew as active films on the fibres after being grown in the culture broth. The optimized process parameters of inoculum size, fibre quantity and agitation speed for immobilized G. candidum were 5%, 2·2 g l-1 of effluent and 100 rev min-1 respectively. High level of laccase (22 and 25 U l-1 in suspended and immobilized fungal cells treatment respectively) was observed during the process of decolourization and it was found that decolourization was directly proportional to the laccase activity. The UV-vis, FTIR, 1 H NMR and GC-MS analyses of treated textile industrial wastewater revealed the degradation of toxic pollutants in the textile effluent and formation of lower molecular weight intermediates. The study revealed a higher efficacy of immobilized G. candidum in comparison to suspended fungal culture, employing ligninolytic enzyme laccase, which catalyzes the degradation/transformation of aromatic dyes in the textile effluent thus decolourizing it.

Genomic and transcriptomic perspectives on mycoremediation of polycyclic aromatic hydrocarbons.

Mycoremediation holds great potential in remedying toxic environments contaminated with polyaromatic organic pollutants. To harness the natural process for practical applications, understanding the genetic and molecular basis of the remediation process is prerequisite. Compared to known bacterial degradation pathways of aromatic pollutants, however, the fungal degradation system is less studied and understanding of the genetic basis for biochemical activity is still incomplete. In this review, we surveyed recent findings from genomic and transcriptomic approaches to mycoremediation of aromatic pollutants, in company with the genomic basis of polycyclic aromatic hydrocarbon (PAH) degradation by basidiomycete fungi, Dentipellis sp. KUC8613. Unique features in the fungal degradation of PAHs were outlined by multiple cellular processes: (i) the initial oxidation of recalcitrant contaminants by various oxidoreductases including mono- and dioxygenases, (ii) the following detoxification, and (iii) the mineralization of activated pollutants that are common metabolism in many fungi. Along with the genomic data, the transcriptomic analysis not only posits a full repertoire of inducible genes that are common or specific to metabolize different PAHs but also leads to the discovery of uncharacterized genes with potential functions for bioremediation processes. In addition, the metagenomic study accesses community level of mycoremediation process to seek for the potential species or a microbial consortium in the natural environments. The comprehensive understanding of fungal degradation in multiple levels will accelerate practical application of mycoremediation. Key points • Mycoremediation of polyaromatic pollutants exploits a potent fungal degrader. • Fungal genomics provides a full repository of potential genes and enzymes. • Mycoremediation is a concerted cellular process involved with many novel genes. • Multi-omics approach enables the genome-scale reconstruction of remedying pathways.

Evaluation of bioremediation strategies for treating recalcitrant halo-organic pollutants in soil environments.

The aim of this study was to investigate the bioremediation potential of polychlorinated biphenyls (PCBs) in soil, mimicking three strategies: (a) mycoaugmentation: by the addition of Trametes sanguinea and Pleurotus sajor-caju co-cultures immobilized on sugarcane bagasse; (b) biostimulation: by supplementation of sugarcane bagasse; and (c) natural attenuation: no amendments. The experiments were done in microcosms using Ultisol soil. Remediation effectiveness was assessed based on pollutants content, soil characteristics, and ecotoxicological tests. Biostimulation and mycoaugmentation demonstrated the highest PCBs-removal (approx. 90%) with a significant toxicity reduction at 90 d. The studied strains were able to survive during the incubation period in non-sterilized soil. Laccase, manganese-peroxidase and endoxylanase activities increased significantly in co-cultures after 60 d. Sugarcane bagasse demonstrated to be not only a suitable support for fungal immobilization but also an efficient substrate for fungal colonization of PCBs-contaminated soils. Mycoaugmentation and biostimulation with sugarcane bagasse improved oxidable organic matter and phosphorous contents as well as dehydrogenase activity in soil. Therefore, biostimulation with sugarcane bagasse and mycoaugmentation applying dual white-rot fungal cultures constitute two efficient bioremediation alternatives to restore PCBs-contaminated soils.

Effect of soil organic matter (SOM) on the degradation of polycyclic aromatic hydrocarbons using Pleurotus dryinus IBB 903-A microcosm study.

Bioremediation of polycyclic aromatic hydrocarbons (PAHs) in soil matrix is often arbitrated by the presence of soil organic matter (SOM). The present study focuses on determining the effect of the soil organic content on the mycoremediation of two model PAHs, phenanthrene (Phe) and benzo(a) pyrene (BaP) through microcosm studies. On comparing various microcosm strategies, a maximum degradation of Phe (99%) and BaP (48.5%) in soil bioaugmented with Pleurotus dryinus IBB 903, followed by, biostimulation with the degradation of Phe (89.9%) and BaP (24.8%) were noted. On relating the degradation pattern with lignolytic enzyme cocktail production, a laccase activity of 108 U/Kg at day 21, aryl alcohol oxidase (411 U/Kg) and manganese peroxidase (52.2 U/Kg) at day 14 along with lignin peroxidase (481 U/Kg) at day 21 were noted in fungal augmented soils, which were comparatively higher than levels observed in the bio-stimulation. Investigating the impact of different concentration of SOM (3-12%), a maximum remediation of Phe by 100% at 9% SOM in days 28 and 58.19% for BaP at 12% SOM, respectively was exhibited. Further, the biosorption effect of PAHs in abiotic condition showed a positive correlation with the increase in SOM, with a maximum adsorption of 3.78% Phe, and 6.93% BaP. The results support that the nominal adsorption ability of SOM, and helps in enhancing the microbial growth, thereby improving their degradation potentials, when less than 6% of SOM was utilized. Overall, this work establishes the critical role of organic matter in the soil with reference by simultaneous stimulation and degradation capability in complete PAHs remediation.