Maxillectomy patients' speech and performance of contemporary speaker-independent automatic speech recognition platforms in Japanese.

BACKGROUND: Automatic speech recognition (ASR) can potentially help older adults and people with disabilities reduce their dependence on others and increase their participation in society. However, maxillectomy patients with reduced speech intelligibility may encounter some problems using such technologies. OBJECTIVES: To investigate the accuracy of three commonly used ASR platforms when used by Japanese maxillectomy patients with and without their obturator placed. METHODS: Speech samples were obtained from 29 maxillectomy patients with and without their obturator and 17 healthy volunteers. The samples were input into three speaker-independent speech recognition platforms and the transcribed text was compared with the original text to calculate the syllable error rate (SER). All participants also completed a conventional speech intelligibility test to grade their speech using Taguchi's method. A comprehensive articulation assessment of patients without their obturator was also performed. RESULTS: Significant differences in SER were observed between healthy and maxillectomy groups. Maxillectomy patients with an obturator showed a significant negative correlation between speech intelligibility scores and SER. However, for those without an obturator, no significant correlations were observed. Furthermore, for maxillectomy patients without an obturator, significant differences were found between syllables grouped by vowels. Syllables containing /i/, /u/ and /e/ exhibited higher error rates compared to those containing /a/ and /o/. Additionally, significant differences were observed when syllables were grouped by consonant place of articulation and manner of articulation. CONCLUSION: The three platforms performed well for healthy volunteers and maxillectomy patients with their obturator, but the SER for maxillectomy patients without their obturator was high, rendering the platforms unusable. System improvement is needed to increase accuracy for maxillectomy patients.

Multi-Modal Digital Impressions For Palatal Defects.

INTRODUCTION: This in-vitro study investigated limitations of intra-oral scanners (IOS) in capturing palatal defects at decreased mouth openings. The trueness and precision of composite 3D-printed models from Cone-Beam Computed Tomography (CBCT) and IOS were measured. METHODS: A partially dentate palatal defect model was scanned with IOS (3M™TrueDefinition) at various simulated mouth openings. Five silicone impressions were poured in gypsum. Scans were taken using 3M™TrueDefinition; Planmeca Planscan®, n=5 each. Model was scanned on two CBCT (PlanmecaProFace®; Accuitomo170®CBCT, n=5 each). Geomagic®Control2014™ was used to create composite-models merging CBCT with IOS. Thirty composite-models were 3D-printed. Trueness and precision were measured. Pearson Correlation Coefficients measured correlation between mouth opening and data capture. Data analysed using Kruskal-Wallis, Wilcoxon rank-sum, and ANOVA. Statistical significance inferred when p⟨0.05. RESULTS: Mouth openings ⟨20mm, IOS didn't capture information of soft tissue. Increased mouth opening positively correlated with increased data capture(r=0.93, p=0.001). AccuitomoCBCT and TrueDefinition IOS composite-models had the highest (trueness) and [precision](median (IQR) 0.172 mm(0.062-0.426)); [mean [SD] 0.080 mm [0.008]]. Casts had the lowest results (median (IQR) 0.289 mm(0.119-1.565));[mean [SD] 0.338 mm [0.089]](p⟨0.001). CONCLUSION: Mouth opening ⟨20mm resulted in insufficient data capture by IOS for clinical applications. Composite digital models showed promising trueness and precision results.

Microbial Analysis of Obturators During Maxillofacial Prosthodontic Treatment Over an 8-Year Period.

The aim of the study was to investigate the microbial colonization (by Candida species, anaerobic and facultative anaerobic bacteria) of maxillary obturators used for the restoration of maxillary defects, including during radiotherapy.Retrospective cohort study.Fifteen patients requiring a maxillary obturator prosthesis had swabs of their obturators and adjacent tissues taken at different stages of their treatment over a period of 8 years.Identification of microbial species from the swabs was carried out using randomly amplified polymorphic DNA polymerase chain reaction (RAPD PCR) analysis, checkerboard DNA-DNA hybridization, CHROMagar Candida chromogenic agar, and DNA sequencing.Candida species were detected in all patients and all patients developed mucositis and candidiasis during radiotherapy which was associated with an increase in colonization of surfaces with Candida spp., particularly C albicans. Microbial colonization increased during radiotherapy and as an obturator aged, and decreased following a reline, delivery of a new prosthesis, or antifungal treatment during radiotherapy.Microbial colonization of maxillary obturators was related to the stage of treatment, age of the obturator material, radiotherapy and antifungal medications, and antifungal treatment may be recommended if C albicans colonization of palatal tissues is greater than 105 colony-forming units per cm2 following the first week of radiotherapy.

Comparison of Attachment Types in Maxillary Implant-assisted Obturators using Digital Image Correlation Analysis.

AIM: The purpose of the study was to evaluate the stress on the implant and to assess the denture displacement for locator and bar and clip attachment types in implant-assisted obturators. MATERIALS AND METHODS: A maxillary edentulous experimental model with a maxillectomy defect was made along with an opposing edentulous mandibular model with self-cure acrylic. Two endosseous implants were placed in the maxillary model. Corresponding obturator complete denture was fabricated for the maxillary model and a complete denture for the mandibular. The attachments were positioned on the implants in maxillary model, and their sleeve/clip was placed on intaglio surface of the dentures. The mounted articulator was placed on a loading apparatus, and force was incrementally applied to it. The strain and displacement for both the attachment types were measured and compared using Digital Image Correlation (DIC). RESULTS: Locator attachment showed the least stress and minimal displacement as compared to bar and clip attachment. CONCLUSION: The stresses around the implants and displacement of the obturator are affected by the attachment type used. It was found that bar and clip (splinted) showed the maximum stresses around the implant and maximum denture displacement. Locator attachment is the better choice over bar and clip because of its additional retentive features. CLINICAL SIGNIFICANCE: The advantage of using DIC over the conventional strain gauge analysis is that a full-field data of displacement and strain can be obtained instead of getting a mean value on the small surface where the strain gauge is positioned.

The Role of Biofilms and Material Surface Characteristics in Microbial Adhesion to Maxillary Obturator Materials: A Literature Review.

BACKGROUND: Maxillofacial prosthetics includes restoration of maxillary defects resulting from resection of palate and nasosinus neoplasms with obturator prostheses which may be colonized by microorganisms and function as a reservoir of infection. Patients with neoplasms commonly also require radiotherapy that can result in changes in saliva quality and quantity and changes in the oral microbial flora. The altered flora, in individuals immunocompromised from cancer therapy, increases their risk of prosthesis-related infections. OBJECTIVES: In this review article, we explore microbial biofilms, their main components, mechanisms of microbial adhesion, and stages of biofilm development. We also discuss the different materials that are used for manufacturing maxillary obturators, their characteristic features, and how these can affect microbial adhesion. Furthermore, we shed some light on the factors that affect microbial adhesion to the surface of maxillary obturators including tissue proteins, protein adsorption, and the acquired enamel pellicle. CONCLUSIONS: The conclusions drawn from this literature review are that it is imperative to minimize the risk of local and systemic infections in immunocompromised patients with cancer having maxillary defects. It is also important to determine the role of saliva in microbial adhesion to obturator materials as well as develop materials that have a longer life span with surface characteristics that promote less microbial adhesion than current materials.

[Research of chewing efficiency in patients with extensive acquired defects of the upper jaw after resections of nasopharyngeal zone tumors and various terms of orthopedic rehabilitation]. / Zhevatel'naia éffektivnost' u patsientov s obshirnymi priobretennymi defektami verkhnei cheliusti posle ortopedicheskoi reabilitatsii.

The aim of the study was to estimate how the quality and terms of rational dental orthopedic treatment affects masticatory efficiency in patients using obturators after extensive resections of nasopharyngeal area tumors. The analysis of indicators of masticatory efficiency in dynamics with the use of masticatory probe of V.N. Trezubov considering prosthetics terms, functional and age features was conducted in 14 patients. The results of the research show that high-quality substitution of obturating structures positively affects masticatory efficiency dynamics and therefore has positive impact on the general health state and also on the level of physical and psychological comfort of patients.

Evaluation of swallowing ability using swallowing sounds in maxillectomy patients.

Maxillectomy for oral tumours often results in debilitating oral hypofunction, which markedly decreases quality of life. Dysphagia, in particular, is one of the most serious problems following maxillectomy. This study used swallowing sounds as a simple evaluation method to evaluate swallowing ability in maxillectomy patients with and without their obturator prosthesis placed. Twenty-seven maxillectomy patients (15 men, 12 women; mean age 66.0 ± 12.1 years) and 30 healthy controls (14 men, 16 women; mean age 44.9 ± 21.3 years) were recruited for this study. Participants were asked to swallow 4 mL of water, and swallowing sounds were recorded using a throat microphone. Duration of the acoustic signal and duration of peak intensity (DPI) were measured. Duration of peak intensity was significantly longer in maxillectomy patients without their obturator than with it (P < .05) and was significantly longer in maxillectomy patients without their obturator than in healthy controls (P < .025 after Bonferroni correction). With the obturator placed, DPI was significantly longer in maxillectomy patients who had undergone soft palate resection than in those who had not (P < .05). These results suggest swallowing ability in maxillectomy patients could be improved by wearing an obturator prosthesis, particularly during the oral stage. However, it is difficult to improve the oral stage of swallowing in patients who have undergone soft palate resection even with obturator placement.

Immediate Implant Placement and Provisionalization Following Tumor-Resective Surgery in the Midfacial Region: A Case Series.

Surgical and prosthodontic restoration of the midfacial region following tumor resection has always posed a considerable challenge, as this area serves crucial functional and esthetic roles. Being diagnosed and subsequently treated for facial tumors can have an immense psychosocial impact on a patient, as the resulting defects are often disfiguring, and lead to an inability to masticate, swallow, and speak clearly. Provision of an immediate facial and dental prosthesis at the time of surgery can limit these side effects and help reduce mental duress on these patients and their families, as well as aid in the process of rehabilitation. Rapid prototyping (RP) and 3D printing, as this paper shows, assists presurgical planning of the tumor resection, as well as the manufacture of maxillofacial and dental prostheses. Often these defects are extensive, so prosthesis retention is aided by zygomatic implants placed at the time of surgical resection. When placed at this time, and prior to radiation therapy, these craniofacial implants have improved survival rates. Thus, this treatment modality can improve postoperative recovery considerably, while at the same time allowing for cleaning and monitoring of the resected site for tumor recurrence.

Palatal obturator designed by 3-dimensional prototyping for a patient with a large ameloblastoma: a case report.

The aim of the present report was to detail the advantages of using 3-dimensional (3D) prototyping in the planning, modeling, and manufacturing of an immediate palatal obturator for a 62-year-old man who underwent a left total maxillectomy to remove a solid, multicystic ameloblastoma. The prosthesis provided favorable restoration of stomatognathic functions, including speech, swallowing, and mastication. The use of an immediate obturator prosthesis made with 3D technology is an important aid in the treatment of patients diagnosed with tumors in the head and neck region.

Total maxillectomy with prosthetic reconstruction techniqueprosthetic reconstruction technique: A case report of a patient who underwent a total maxillectomy.

The prosthetic treatment of patients with total maxillectomies is an enormous reconstruction challenge because of insufficient support and retention from the residual tissues. It is not possible to place the bulb in the presence of unfavorable undercuts throughout the nasal cavity floor and borders. The purpose of this article was to describe a prosthetic reconstruction technique which accomplishes optimum sealing, retention, stabilization, and easy placement of an open-hollow acrylic resin obturator using a spring with a resilient liner for a patient who underwent a total maxillectomy. The springs were placed in the resilient liner to facilitate the placement of the obturator prosthesis because of unfavorable undercuts. It was possible to fit the prosthesis in two stages by means of springs. The objective of this technique is to improve the patient's psychological, functional, and social well-being by producing a stable, retentive, leakproof, comfortable, easy-fitting prosthesis. This technique is appropriate for patients who have undergone total maxillectomies when implant placement is not possible.

Prosthetic Rehabilitation of Patients After Surgical Treatment of Maxillary Tumors with Respect to Upper Airway Protection.

As a consequence of surgical treatment of maxillary tumors, a connection between oral and nasal cavities is formed, which leads to serious functional disorders, manifested by inability to normally ingest food, proper speech articulation, and to respiratory route disorders and upper airway inflammation. These morphological and functional disorders are intensified by adjunctive radio- or chemotherapy. The aim of this paper is to present different possible methods of rehabilitation, including application of interim obturators and individually planned prosthetic restorations to improve respiratory efficiency in patients after extensive maxillary resections. In the course of prosthetic treatment, cooperation with the laryngologist to consider every aspect of chronic paranasal sinusitis, accompanied by concurrent inflammation of oral, nasal, or laryngeal mucous membranes, was of paramount importance. Based on the quality of life questionnaire, used in this study, evident improvement in the masticatory efficiency, speech articulation, and respiration was observed. Particularly good effects were obtained in edentulous patients, in whom implant-prosthetic treatment was possible to apply. Comprehensive and multidisciplinary care of postoperative patients greatly contributes to their better quality of life and facilitates their return to prior living conditions, as well as to occupational and family lives.

3D evaluation of maxillary arches in unilateral cleft lip and palate patients treated with nasoalveolar moulding vs. Hotz's plate.

To compare the three-dimensional changes occurring in the maxillary arch during the use of modified pre-surgical nasoalveolar moulding (PNAM) and Hotz's plate. A clinical trial including 32 children with unilateral cleft lip and palate (UCLP), 16 treated with Hotz's plate and 16 with PNAM, was performed. Impressions of the maxillary arches were taken: A. prior to pre-surgical orthopaedics, B. before cheiloplasty and C. after cheiloplasty. Models were digitised using a stereophotogrammetric instrument, and geodesic distances were calculated: anterior, canine and posterior widths of the arch, and lengths and cleft depths of the larger and shorter segments. The time and treatment effects were assessed by two-factor anova. A significant effect of treatment was found for cleft depth at the larger segment: children treated with Hotz's plate had significantly deeper cleft than children treated with PNAM. All distances significantly changed during time: the anterior and canine widths decreased, while the posterior width, the lengths and depths of the cleft segments increased. Significant treatment per time interactions was found. The anterior and canine widths reduced more with PNAM between time points A and B while Hotz's treatment was more effective between B and C. The shorter segment depth increased more between B and C with PNAM, and between A and B with Hotz's plate. During pre-surgical orthopaedics, therapy with PNAM obtained the best results in reducing the width at the anterior segment of the cleft. This treatment gave a lower increase in cleft depth than treatment with Hotz's plate.

Dry mouth and denture plaque microflora in complete denture and palatal obturator prosthesis wearers.

OBJECTIVE AND BACKGROUND: The purpose of this study was to investigate the association of dry mouth with denture plaque microflora in patients with palatal obturator prostheses from the viewpoint of infection control. METHODS: Thirty palatal obturator prosthesis wearers were compared with 30 healthy maxillary complete denture wearers. Dry mouth was examined using a moisture-checking device and was diagnosed by the measured moisture levels. Denture plaque was collected by rubbing the mucosal surface of the denture with a swab; collected microorganisms were cultured and identified using culture-dependent methods. The number of colonising microorganisms and prevalence of microorganisms were examined according to the type of prostheses and presence of dry mouth using nonparametric tests and frequency analysis (α = 0.05). RESULTS: The prevalence of Candida spp. and Staphylococcus spp. in palatal obturator prostheses was significantly higher than that in complete dentures. In palatal obturator prostheses, the total number of colonising microorganisms showed no significant differences between the groups with and without dry mouth on each side of the prostheses. However, the prevalence of Candida spp. and Staphylococcus spp. in the group with dry mouth was significantly higher than that in the group without dry mouth. The number of microorganisms and moisture levels of palatal obturator prosthesis wearers showed a significantly negative correlation with Candida spp. and Staphylococcus spp., but a positive correlation with Neisseria spp. CONCLUSION: It was concluded that palatal obturator prosthesis wearers with a dry mouth have greater colonisation by Candida spp. and Staphylococcus spp. than do complete denture wearers.

Severe Maxillectomy Defect Rehabilitation with an Implant-Retained Obturator Prosthesis: A Case Report.

Conventional obturator prostheses might cause dissatisfaction in patients with hard or soft palate defects due to inadequate retention and function during speech, mastication, and swallowing. Thus, surgical reconstruction and implant-supported obturators are considered as alternative treatments for these patients. This case-report study describes the prosthetic reconstruction of an 88-year-old patient suffering from a hard palate defect after surgical resection of verrucous carcinoma in the left side of the hard palate. Fifteen months after radiotherapy, two implants were placed in the right side of the remaining ridge, in the second and third molar region. After the implant healing period, the implant-supported obturator prosthesis was fabricated. The patient was satisfied with the esthetics and function of the obturator at the 12-month recall visit and radiographs showed normal healing and no bone loss around the implants.

Influence of needle gauge on pain perception and use of obturators in achieving profound pulpal anesthesia - A double-blinded in vivo study.

Introduction: Achieving profound pupal anesthesia and pain management is key in endodontic practice. However, inferior alveolar nerve block (IANB) does not always result in successful pulpal anesthesia, during symptomatic irreversible pulpitis and has a high failure rate between 35% and 45%. Intrapulpal (IP) injection has been found to have increased efficiency and pain. The study aims to find the pain perception of 26G and 31G and the use of obturators in improving the efficacy of IP anesthesia. Materials and Methods: Eighty patients with symptomatic irreversible pulpitis after the failure of IANB were recruited and divided into four groups to receive IP with Group I A: 26G with obturators, Group I B: 26G without obturators, Group IIA: 31G with obturators, and Group IIB: 31G without obturators. The pain was measured using the visual analog scale and the effectivity of anesthetic injection by the duration of action. Results: A 31G needle produced the least pain perception compared to the 26G needle during IP injection. A 31G with an obturator was the most efficient, acting in less than a minute and 26G without an obturator showed the least. Conclusion: Within the limitation of this trial, it can be concluded that lesser gauge needles reduce pain perception during IP, and obturators achieve adequate back pressure.

Digital Applications in the Fabrication of Obturators in Maxillectomy Defects: A Systematic Review.

The traditional approach of rehabilitating maxillofacial defects, as in the case of patients with maxillectomy, is exceedingly complex, tedious, technique-dependent, as well as extremely lengthy because it calls for several clinical appointments. The field of maxillofacial prosthodontics has benefited greatly from the introduction of digital technologies in the modern era. This systematic review was conducted to analyze the outcomes of applications of digital technology for the fabrication of obturators in patients with maxillectomy defects.  The PICOS (Population, Intervention, Comparison, Outcomes, and Study) inclusion criteria were employed in the systematic review, which focused on the query "How effective are obturators fabricated using digital techniques?" An electronic search of databases from 2017 to 2024 (Google Scholar, PubMed, Scopus) based on the predetermined eligibility criteria yielded 13 case reports and observational studies. The qualitative methodological assessment of the included studies was done based on the NIH quality assessment tool that provided criteria for special considerations in evaluating case reports and observational studies. The objective of the review was to analyze the application of various digital techniques for the fabrication of obturators in maxillectomy patients as well as to determine if a fully digital workflow is a viable option for effective fabrication of the same. The main outcome of the review was that the application of digital workflows in the fabrication of obturators was found to reduce working time, minimize material consumption, and enhance patient comfort and acceptance.

Perception and Attitude of Parents of Children With Orofacial Clefts Regarding the Use of Presurgical Orthopedics and Feeding Obturators.

OBJECTIVE: This study aims to evaluate the parents' attitude and their perception regarding the management of orofacial cleft (OFC) children with presurgical nasoalveolar molding (PNAM), DynaCleft and/or feeding obturators. MATERIAL AND METHODS: A cross-sectional, descriptive and observational retrospective survey-based study was conducted among parents of OFC children treated with PNAM, DynaCleft and/or feeding obturators who attended a primary dental health care center in Al-Madinah, Saudi Arabia, from 2019 to 2023. A validated questionnaire was used after translating it from English to Arabic. The questionnaire consisted of 32 questions divided into two sections. The first section covers parents' sociodemographic data and OFC risk factors. The second section evaluates the parents' perception regarding the use of presurgical orthopedics (PSO) for OFC repair. The questionnaire was completed through telephone interviews carried out by two investigators with the parents of OFC children. RESULTS: Out of 142 parents of OFC children, only 40 parents and their children met the inclusion criteria of the study. Most parents (95%) reported their satisfaction with the treatment and stated that they would encourage other parents of OFC children to use PSO. CONCLUSION: This study concluded that parents of OFC children had a positive attitude toward PSO treatment. Based on the positive outcomes of PSO treatment reported in the current study and previous literature, PSO should be considered as a routine treatment in the early management of orofacial clefts.

Insufficient Evidence to Ascertain the Long-Term Survival of PEEK Dental Prostheses: A Systematic Review of Clinical Studies.

INTRODUCTION: Polyetheretherketone (PEEK) is a polymer that is used in the construction of orthopaedic and dental implants. It is also used to construct removable and fixed dental prostheses due to its superior mechanical and esthetic properties compared to conventional materials. This systematic review aims to analyse and appraise the literature concerning PEEK dental prostheses critically. METHODS: The following focused question was constructed 'Are dental prostheses made of PEEK inferior to those made of other materials in terms of clinical- and patient-reported outcomes?'. The CONSORT (Consolidated Standards of Reporting Trials) tool was used for the quality assessment of the randomised clinical trials. The STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) quality assessment tool was used to assess the quality of observational studies and the case reports were evaluated using the CARE (Case Report) guidelines. RESULTS: A total of 12 studies were included in this review. Two case studies received an overall grade of medium and the overall quality of six studies was graded as 'low'. All three observational studies and the only randomised controlled trial received scores of 'medium'. CONCLUSION: PEEK-based dental prostheses may provide a viable and more esthetic alternative to conventional prosthodontic appliances. However, within the limitations of this study is the evidence to ascertain the long-term viability of PEEK-based dental prostheses. Future studies should focus on conducting large-scale, multicenter trials to compare the survival rate of PEEK prostheses to that of conventionally available prosthodontic appliances.

Evaluation of the root filling quality with experimental carrier-based obturators: a CLSM and FEG-SEM analysis.

This study evaluated tubule penetration of GuttaFlow Bioseal with cold single cone or carrier-based technique, under confocal laser scanning microscopy (CLSM). Twenty straight single-rooted teeth were instrumented with Hyflex CM and divided in two groups (n = 10) according to the obturation method: single cold gutta-percha cones; experimental carrier-based obturators. GuttaFlow Bioseal, labelled with Rhodamine B dye, was used as sealer in both groups. Teeth transversally sectioned were observed under CLSM. Percentage of sealer penetration and integrity of sealer layer perimeter were measured. Surface and microstructural characteristics of obturators and gutta-percha cones were compared by FEG-SEM and EDX analysis. No significant differences were found between groups for each examined parameter. Significant differences (P < 0.05) were reported mainly within groups. Integrity was similar among and within groups. FEG-SEM/EDX analysis of obturators revealed the presence of Ba and Zn. Carrier-based obturation technique associated with GuttaFlow Bioseal does not seem to affect sealer penetration into dentinal tubules.

Cocaine-Induced Midline Destructive Lesions: A Real Challenge in Oral Rehabilitation.

Cocaine abuse is associated with severe local effects on mucosal and osteocartilaginous structures, with a centrifugal spreading pattern from the nose, a condition known as cocaine-induced midline destructive lesions (CIMDL). When the soft or hard palate is affected, a perforation may occur, with subsequent oro-nasal reflux and hypernasal speech. Both diagnosis and therapy (surgical or prosthetic) constitute a serious challenge for the physician. The cases of three patients affected by cocaine-induced palatal perforation and treated with a palatal obturator at San Raffaele Dentistry department between 2016 and 2019 are presented. In addition, the literature was reviewed in search of papers reporting the therapeutic management in patients affected by cocaine-induced palatal perforation. All the patients in our sample suffered from oro-nasal reflux and hypernasal speech, and reported a significant impact on interpersonal relationships. The results at the delivery of the obturator were satisfactory, but the duration of such results was limited in two cases, as the progression of the disease necessitated continuous modifications of the product, with a consequent increase in costs and a reduction in patient satisfaction. In conclusion, the therapy for palatal defects in CIMDL includes both reconstructive surgery and prosthetic obturators, the latter being the only possibility in the event of active disease. It successfully relieves symptoms, but the long-term efficacy is strongly related to the level of disease activity.