RESUMO
As flexible wearable devices, hydrogel sensors have attracted extensive attention in the field of soft electronics. However, the application or long-term stability of conventional hydrogels at extreme temperatures remains a challenge due to the presence of water. Antifreezing and antidrying ionic conductive organohydrogels were prepared using cellulose nanocrystals and gelatin as raw materials, and the hydrogels were prepared in a water/glycerol binary solvent by a one-pot method. The prepared hydrogels were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The mechanical properties, electrical conductivity, and sensing properties of the hydrogels were studied by means of a universal material testing machine and LCR digital bridge. The results show that the ionic conductive hydrogel exhibits high stretchability (elongation at break, 584.35%) and firmness (up to 0.16 MPa). As the binary solvent easily forms strong hydrogen bonds with water molecules, experiments show that the organohydrogels exhibit excellent freezing and drying (7 days). The organohydrogels maintain conductivity and stable sensitivity at a temperature range (-50 °C-50 °C) and after long-term storage (7 days). Moreover, the organohydrogel-based wearable sensors with a gauge factor of 6.47 (strain, 0-400%) could detect human motions. Therefore, multifunctional organohydrogel wearable sensors with antifreezing and antidrying properties have promising potential for human body monitoring under a broad range of environmental conditions.
RESUMO
Hydrogels with pure hydrophilic network have received much attention due to their excellent low frictional behavior. However, the lubrication performance of hydrogels is not satisfied under high-speed condition due to the energy dissipation caused by adsorbed polymer chains as well as the failure of lubricating mechanisms accompanied by the transition of lubrication regime. In this work, interpenetrating double-network organohydrogels were constructed by combining hydrophilic and oleophilic polymer networks to modify the physiochemical properties of surface polymer chains, especially the chain mobility. The oleophilic polymer network spatially restricting the mobility of the swollen hydrophilic network in water, resulted in a low coefficient of friction (ca. 0.01) compared with conventional hydrogels at high speed (0.1â m s-1 ). Meanwhile, the organohydrogels had superior wear resistance, with almost no wear observed on the sliding track after 5â kâ cycles of rubbing at high speed. The design concept of organohydrogels can be extended to a variety of low-wear, highly-lubricating materials.
Assuntos
Hidrogéis , Polímeros , Polímeros/química , Lubrificação , Interações Hidrofóbicas e Hidrofílicas , Fricção , Hidrogéis/químicaRESUMO
Hydrogel electrolytes have attracted enormous attention in flexible and safe supercapacitors. However, the interfacial contact problem between hydrogel electrolyte and electrodes, and the environmental instability are the key factors restricting the development of hydrogel-based supercapacitors. Here, a nucleotide-tackified adhesive organohydrogel electrolyte is successfully constructed and exhibits freezing resistance and water-holding ability based on the water/glycerol binary solvent system. Adenosine monophosphate enables the organohydrogels to possess outstanding adhesion and mechanical robustness. The robust adhesion can ensure close contact between the organohydrogel electrolyte and electrodes for constructing an all-in-one supercapacitor with low interfacial contact resistance. Impressively, the integrated organohydrogel-based supercapacitors display an areal specific capacitance of 163.6 mF cm-2 . Besides, the supercapacitors feature prominent environmental stability with capacitance retention of 90.6% after 5000 charging/discharging cycles at -20 °C. Furthermore, based on the strong interfacial adhesion, the supercapacitors present excellent electrochemical stability without delamination/displacement between electrolyte and electrodes even under severe deformations such as bending and twisting. It is anticipated that this work will provide an encouraging way for developing flexible energy storage devices with electrochemical stability and environmental adaptability.
Assuntos
Eletrólitos , Nucleotídeos , Capacitância Elétrica , Eletrodos , HidrogéisRESUMO
In this study, six different organo-hydrogels containing agar-glycerol (AG)-based garlic oil (GO) were synthesized using two different crosslinkers (N,N, methylenebisacrylamide (MBA), glutaraldehyde (GA)) to ensure the controlled release of ceftriaxone (Ce) and carboplatin (Cp). Synthesized organo-hydrogels were characterized by FT-IR. Afterward, swelling behaviors were investigated in DI, tap water, ethanol, acetone, ethanol/DI water (1:1), acetone/DI water (1:1) and gasoline environments and different pH. As a result of hemolysis, blood clotting and antioxidant analysis, organo-hydrogels have been shown to have blood compatibility and antioxidant properties. Ce and Cp release properties of the prepared organo-hydrogels were also determined. The highest Ce release rate was obtained to be 37.8% for p (AG-g-GO)3 at pH 8.0 after 7 days. However, the highest Cp release rate was found to be 95.4% for p (AG-g-GO)3 at pH 7.4 after 1 day.
RESUMO
Conductive hydrogels are a class of stretchable conductive materials that are important for various applications. However, water-based conductive hydrogels inevitably lose elasticity and conductivity at subzero temperatures, which severely limits their applications at low temperatures. Herein we report anti-freezing conductive organohydrogels by using an H2 O/ethylene glycol binary solvent as dispersion medium. Owing to the freezing tolerance of the binary solvent, our organohydrogels exhibit stable flexibility and strain-sensitivity in the temperature range from -55.0 to 44.6 °C. Meanwhile, the solvent molecules could form hydrogen bonds with polyvinyl alcohol (PVA) chains and induce the crystallization of PVA, greatly improving the mechanical strength of the organohydrogels. Furthermore, the non-covalent crosslinks endow the conductive organohydrogels with intriguing remoldability and self-healing capability, which are important for practical applications.
RESUMO
A new conductive and transparent organohydrogel is developed with high stretchability, excellent mechanical, self-healing, antifreezing, and adhesive properties. A simple one-pot polymerization method is used to create polyacrylamide cross-linked through N,N'-methylenebis(acrylamide) (MBAA) and divinylbenzene (DVB). The dual chemical cross-linked gel network is complemented by several physical cross-links via hydrogen bonding and π-π interaction. Multiple chemical and physical cross-links are used to construct the gel network that allows toughness (171 kPa), low modulus (≈45 kPa), excellent stretchability (>1100%), and self-healing ability. The use of appropriate proportions of the water/glycerol binary solvent system ensures efficient environment tolerance (-20 to 40 °C). Phytic acid is used as a conductive filler that provides excellent conductivity and contributes to the physical cross-linking. Dopamine is incorporated in the gel matrix, which endows excellent adhesive property of the gel. The organohydrogel-based strain sensors are developed with state-independent properties, highly linear dependence, and excellent antifatigue performance (>100 cycles). Moreover, during the practical wearable sensing tests, human motions can be detected, including speaking, smiling, and joint movement. Additionally, the sensor is biocompatible, indicating the potential applications for the next generation of epidermal sensors.
Assuntos
Acrilamida , Dopamina , Humanos , Condutividade Elétrica , Epiderme , Excipientes , HidrogéisRESUMO
Improving mechanical strength and frost-resistance is an important research direction in the field of hydrogel materials. Herein, using bacterial nanocellulose (BC) as a reinforcing agent and polyvinyl alcohol (PVA) as a polymer matrix, a frost-resistant organohydrogel was constructed via the freezing-thawing method in a new binary solvent system of N, N-dimethylformamide and water (DMF-H2O), which was designed according to the Hansen Solubility Parameter. Owing to the solvent-induced crystallization effect that led to the enhanced 3D hydrogen bonding network during the freezing-thawing process, the optimal organohydrogel achieved excellent mechanical properties with the tensile strength of 2,974 kPa and the stretchability of 277 % at room temperature, respectively. In the visiblelight range, the organohydrogel demonstrated high transmittance. Moreover, the presence of a DMF-H2O binary solvent endows it with frost-resistance, retaining the tensile strength of 508 kPa and a stretchability of 190 % even at -70 °C, respectively. This kind of transparent, frost-resistant organohydrogel has potential uses in harsh settings due to its great mechanical strength.
RESUMO
Conductive hydrogels are ideal materials for intelligent medical devices, human-machine interfaces, and flexible bioelectrodes due to their adjustable mechanical properties and electrical responsiveness, whereas it is still a great challenge to achieve the integration of excellent flexibility and biocompatibility into one hydrogel sensor while also incorporating self-healing, self-adhesion, environmental tolerance, and antimicrobial properties. Here, a nanocomposite conductive organohydrogel was constructed by using collagen (Col), alginate-derived carbon quantum dots (OSA-CQDs), poly(acrylic acid) (PAA), ethylene glycol reduced AgNPs, and Fe3+ ions. Depending on OSA-CQDs with multiple chemical binding sites and high specific surface area as cross-linkers, while coupling highly biologically active Col chains and PAA chains are serving as an energy dissipation module, the resulting organohydrogel exhibited excellent flexibility (795% of strain, 193 kPa of strength), high cell compatibility (>95% survival rate), self-healing efficiency (HE = 79.5%), antifreezing (-20 °C), moisturizing (>120 h), repeatable adhesion (strength >20 kPa, times >10), inhibitory activity against Escherichia coli and Staphylococcus aureus (9 and 21.5 cm2), conductivity, and strain sensitivity (σ = 1.34 S/m, gauge factor (GF) = 11.63). Based on the all-in-one integration of multifunction, the organohydrogel can collaboratively adapt to the multimode of strain sensing and electrophysiological sensing to realize wireless real-time monitoring of human activities and physiological health. Therefore, this work provides a new and common platform for the design and sensing of next-generation hydrogel-based smart wearable sensors.
RESUMO
Hydrogel-based flexible wearable sensors have garnered significant attention in recent years. However, the use of hydrogel, a biomaterial known for its high toughness, environmental friendliness, and frost resistance, poses a considerable challenge. In this study, we propose a stepwise construction and multiple non-covalent interaction matching strategy to successfully prepare dynamically physically crosslinked multifunctional conductive hydrogels. These hydrogels self-assembled to form a rigid crosslinked network through intermolecular hydrogen bonding and metal ion coordination chelation. Furthermore, the freeze-thawing process promoted the formation of poly(vinyl alcohol) microcrystalline domains within the amorphous hydrogel network system, resulting in exceptional mechanical properties, including a tensile strength (2.09 ± 0.01 MPa) and elongation at break of 562 ± 12 %. It can lift 10,000 times its own weight. Additionally, these hydrogels exhibit excellent resistance to swelling and maintain good toughness even at temperatures as low as -60 °C. As a wearable strain sensor with remarkable sensing ability (GF = 1.46), it can be effectively utilized in water and underwater environments. Moreover, it demonstrates excellent antimicrobial properties against Escherichia coli (Gram-negative bacteria). Leveraging its impressive sensing ability, we combine signal recognition with a deep learning model by incorporating Morse code for encryption and decryption, enabling information transmission.
Assuntos
Quitosana , Dispositivos Eletrônicos Vestíveis , Condutividade Elétrica , Escherichia coli , Hidrogéis , Álcool de PolivinilRESUMO
Viscous biofluids on wounds challenge conventional "water-absorbing" wound dressings in efficient drainage due to their poor fluidity, generally causing prolonged inflammation, anti-angiogenesis, and delayed wound closure. Herein, it is reported that a self-pumping organohydrogel dressing (SPD) with aligned hydrated hydrogel channels, prepared by a three-dimensional-templated wetting-enabled-transfer (3D-WET) polymerization process, can efficiently drain viscous fluids and accelerate diabetic wound healing. The asymmetric wettability of the hydrophobic-hydrophilic layers and aligned hydrated hydrogel channels enable unidirectional and efficient drainage of viscous fluids away from the wounds, preventing their overhydration and inflammatory stimulation. The organogel layer can adhere onto the skin around the wounds but can be easily detached from the wet wound area, avoiding secondary trauma to the newly formed tissues. Taking a diabetic rat model as an example, the SPD can significantly downregulate the inflammation response by ≈70.8%, enhance the dermal remodeling by ≈14.3%, and shorten wound closure time by about 1/3 compared with the commercial dressing (3M, Tegaderm hydrocolloid thin dressing). This study sheds light on the development of the next generation of functional dressings for chronic wounds involving viscous biofluids.
Assuntos
Bandagens , Diabetes Mellitus Experimental , Hidrogéis , Cicatrização , Cicatrização/efeitos dos fármacos , Animais , Hidrogéis/química , Ratos , Diabetes Mellitus Experimental/terapia , Viscosidade , Molhabilidade , Interações Hidrofóbicas e Hidrofílicas , Pele , Ratos Sprague-DawleyRESUMO
Cell-based microarrays are widely used in the fields of drug discovery and toxicology. Precise gradient generation and automated drug feeding are essential for high-throughput screening of live cells in tiny droplets. However, most existing technologies either require sophisticated robotic equipment or cause mechanical/physiological interference with cells. Here, a heterogeneous organohydrogel is presented for automated gradient drug feeding, while ensuring minimal interference with cells. The heterogeneous organohydrogel comprises three crucial components. The bottom surface can automatically generate gradients functioning as a gradient generator, the organohydrogel bulk allows unidirectional transport of drugs without backflow, and the top surface with hydrophilic arrays can firmly anchor the cell-based droplet array to evaluate the concentration-dependent bioeffects of drugs accurately. Such a unique structure enables universal screening of different cell types and drugs dissolved in different solvents, requiring neither additional accessories nor arduous drug functionalization. The heterogeneous organohydrogel with unprecedented automation and non-interference possesses the enormous potential to be a next-generation platform for drug screening.
RESUMO
A sustainable and efficient multicatalytic chemical transformation approach is devised for the development of all-biobased environmentally adaptable polymers and gels with multifunctional properties. The catalytic system, utilizing Lignin aluminum nanoparticles (AlNPs)-aluminum ions (Al3+ ), synergistically combines multiple catalytic cycles to create robust, mechanically stable, and versatile organohydrogels. Single catalytic cycles alone fail to achieve desired results, highlighting the importance of cooperatively combining different cycles for successful outcomes. The transformation involves free radical crosslinking, reversible quinone-catechol reactions, and an autocatalytic mechanism, resulting in a dual crosslinking strategy that incorporates both covalent and ionic crosslinking. This approach creates a dynamic gel system with combined energy dissipation and storage mechanisms. The engineered organohydrogels demonstrate vital multifunctionalities such as good thermal stability, self-healing, and adhesive properties, flame-retardancy, mechanical resilience and durability, conductivity, viscoelastic properties, environmental adaptability, and resistance to extreme conditions such as freezing and drying. The developed catalytic technology and resulting gels hold significant potential for applications in flexible electronics, energy storage, actuators, and sensors.
RESUMO
BACKGROUND: Diabetic wound represents a serious issue with a substantial impact and an exceptionally complex pathology affecting patients' mental health and quality of life. So, we have developed a novel 3D organo-hydrogel nanocomposite of polydopamine/TiO2 nanoparticles and cu (PDA-TiO2@Cu) and examined its efficacy in diabetic wound healing. METHODS: Forty-five adult male albino rats were divided into normal control rats (non-diabetic rats with non-treated skin wounds), diabetic control rats (diabetic rats with non-treated skin wounds), and organo-hydrogel-treated rats (diabetic wounds treated with topically applied organo- hydrogel once daily). Macroscopic changes of the wound were observed on days 0, 3, 5, 7, and 10 to measure wound diameters. Skin specimens from the wound tissue were taken on days 3, 7, and 10, respectively, and examined histologically and immunohistochemically. Also, the gene expressions of collagen I, Matrix Metalloproteinase-9 (MMP-9), and Epidermal Growth Factor (EGF), and levels of Interleukin 6 (IL-6) and Superoxide Dismutase (SOD) were assessed. RESULTS: Our observed results indicated that the developed patch significantly accelerated the healing time compared to the normal control and diabetic control groups. Moreover, the patchloaded group revealed complete re-epithelization and a highly significant increase in the mean area % of CD31 immunostaining on day 7. The organo-hydrogel-loaded group displayed a significant decrease in gene expression of MMP-9 and a significant increase in gene expression of EGF and collagen I. Additionally, the organo-hydrogel-loaded group exhibited a significant decrease in levels of IL-6 and a significant increase in levels of SOD, compared to the normal diabetic control groups. CONCLUSION: The organo-hydrogel can be used for treating and decreasing the healing period of diabetic wounds.
RESUMO
Piezoelectric hydrogel sensors are becoming increasingly popular for wearable sensing applications due to their high sensitivity, self-powered performance, and simple preparation process. However, conventional piezoelectric hydrogels lack antifreezing properties and are thus confronted with the liability of rupture in low temperatures owing to the use of water as the dispersion medium. Herein, a kind of piezoelectric organohydrogel that integrates piezoelectricity, low-temperature tolerance, mechanical robustness, and stable electrical performance is reported by using poly(vinylidene fluoride) (PVDF), acrylonitrile (AN), acrylamide (AAm), p-styrenesulfonate (NaSS), glycerol, and zinc chloride. In detail, the dipolar interaction of the PVDF chain with the PAN chain facilitates the crystal phase transition of PVDF from the α to ß phase, which endows the organohydrogels with a high piezoelectric constant d33 of 35 pC/N. In addition, the organohydrogels are highly ductile and can withstand significant tensile and compressive forces through the synergy of the dipolar interaction and amide hydrogen bonding. Besides, by incorporating glycerol and zinc chloride, the growth of ice crystals is inhibited, allowing the organohydrogels to maintain stable flexibility and sensitivity even at -20 °C. The real-time monitoring of the pulse signal for up to 2 min indicates that the gel sensor has stable sensitivity. It is believed that our organohydrogels will have good prospects in future wearable electronics.
Assuntos
Cloretos , Polímeros de Fluorcarboneto , Glicerol , Polivinil , Dispositivos Eletrônicos Vestíveis , Compostos de Zinco , Humanos , Acrilamida , HidrogéisRESUMO
Conductive hydrogels have shown promising application prospects in the field of flexible sensors, but they often suffer from poor mechanical properties, low sensitivity, and lack of frost resistance. Herein, we report a tough, highly sensitive, and antifreeze strain sensor assembled from a conductive organohydrogel composed of a dual-cross-linked polyacrylamide and poly(vinyl alcohol) (PVA) network, as well as MXene nanosheets as nanofillers and poly(3,4-ethylenedioxythiophene)-doped poly(styrenesulfonate) (PEDOT/PSS) as the main conducting component (PPMP-OH organohydrogel). The tensile strength and toughness of PPMP-OH had been greatly enhanced by MXene nanosheets due to the mechanical reinforcement of MXene nanosheets, as well as various strong noncovalent interactions formed in the organohydrogels. The PPM1P-OH organohydrogels showed a tensile strength of 1.48 MPa at 772% and a toughness of 5.59 MJ/m3. Moreover, the conductivity and strain-sensing performance of PPMP-OH were significantly improved by PEDOT/PSS, which can form hydrogen bonds with PVA and electrostatic interactions with MXene. This was greatly beneficial for constructing a uniformly distributed and stable 3D conductive network and helped to obtain strain-dependent resistance of PPMP-OH. The strain sensors assembled from PPMP1-OH exhibited a high sensitivity of 5.16, a wide range of detectable strains up to 500%, and a short response time of 122 ms, which can effectively detect various physiological activities of the human body with high stability. In addition, the corresponding pressure sensor array also showed high sensitivity in identifying pressure magnitude and position.
RESUMO
Conductive hydrogels (CHs) are emerging materials for next generation sensing systems in flexible electronics. However, the fabrication of competent CHs with excellent stretchability, adhesion, self-healing, photothermal conversion, multisensing, and environmental stability remains a huge challenge. Herein, a nanocomposite organohydrogel with the above features is constructed by in situ copolymerization of zwitterionic monomer and acrylamide in the existence of carboxylic cellulose nanofiber-carrying reduced graphene oxide (rGO) plus a solvent displacement strategy. The synergy of abundant dipole-dipole interactions and intermolecular hydrogen bonds enables the organohydrogel to exhibit high stretchability, strong adhesion, and good self-healing. The presence of glycerol weakens the formation of hydrogen bonds between water molecules, endowing the organohydrogel with excellent environmental stability (-40 to 60 °C) to adapt to different application scenarios. Importantly, the multimodal organohydrogel presents excellent sensing behavior, including a high gauge factor of 16.3 at strains of 400-1440% and a reliable thermal coefficient of resistance (-4.2 °C-1) over a wide temperature widow (-40 to 60 °C). Moreover, the organohydrogel displays a highly efficient and reliable photothermal conversion ability due to the favorable optical absorbing behavior of rGO. Notably, the organohydrogel can detect accurate human activities at ambient temperature, demonstrating potential applications in flexible intelligent electronics.
RESUMO
Stimuli-responsive optical hydrogels are widely used in various fields including environmental sensing, optical encryption, and intelligent display manufacturing. However, these hydrogels are susceptible to water losses when exposed to air, leading to structural damage, significantly shortened service lives, and compromised durability. This study presents mechanically robust, environmentally stable, and multi-stimuli responsive optical organohydrogel fibers with customizable iridescent colors. These fibers are fabricated by incorporating tunicate cellulose nanocrystals, alginate, and acrylamide in a glycerol-water binary system. The synthesized fibers exhibit high strength (1.38 MPa), moisture retention capabilities, and elastic properties. Furthermore, a sensor based on these fibers demonstrates high- and low-temperature resistance along with stimuli-responsive characteristics, effectively detecting changes in environmental humidity and strains. Moreover, the fiber sensor demonstrates continuous, repeatable, and quantitatively predictable moisture discoloration responses across a humidity range of 11 % and 98 %. During strain sensing, the optical-organohydrogel-based sensor demonstrates a large working strain (50 %) and excellent cycling stability, underscoring its potential for effectively monitoring a wide range of intricate human motions. Overall, the synthesized fibers and their simple fabrication method can elicit new avenues for numerous related applications including the large-scale implementation of advanced wearable technology.
Assuntos
Celulose , Umidade , Hidrogéis , Nanopartículas , Celulose/química , Nanopartículas/química , Hidrogéis/química , Cor , Fibras Ópticas , Humanos , Temperatura , Alginatos/químicaRESUMO
Supermolecular hydrogel ionic skin (i-skin) linked with smartphones has attracted widespread attention in physiological activity detection due to its good stability in complex scenarios. However, the low ionic conductivity, inferior mechanical properties, poor contact adhesion, and insufficient freeze resistance of most used hydrogels limit their practical application in flexible electronics. Herein, a novel multifunctional poly(vinyl alcohol)-based conductive organohydrogel (PCEL5.0%) with a supermolecular structure was constructed by innovatively employing sodium carboxymethyl cellulose (CMC-Na) as reinforcement material, ethylene glycol as antifreeze, and lithium chloride as a water retaining agent. Thanks to the synergistic effect of these components, the PCEL5.0% organohydrogel shows excellent performance in terms of ionic conductivity (1.61 S m-1), mechanical properties (tensile strength of 70.38 kPa and elongation at break of 537.84%), interfacial adhesion (1.06 kPa to pig skin), frost resistance (-50.4 °C), water retention (67.1% at 22% relative humidity), and remoldability. The resultant PCEL5.0%-based i-skin delivers satisfactory sensitivity (GF = 1.38) with fast response (348 ms) and high precision under different deformations and low temperature (-25 °C). Significantly, the wireless sensor system based on the PCEL5.0% organohydrogel i-skin can transmit signals from physiological activities and sign language to a smartphone by Bluetooth technology and dynamically displays the status of these movements. The organohydrogel i-skin shows great potential in diverse fields of physiological activity detection, human-computer interaction, and rehabilitation medicine.
Assuntos
Hidrogéis , Hidrogéis/química , Monitorização Fisiológica/instrumentação , Monitorização Fisiológica/métodos , Animais , Tecnologia sem Fio , Dispositivos Eletrônicos Vestíveis , Condutividade Elétrica , Humanos , Álcool de Polivinil/química , Suínos , Smartphone , Pele/química , Carboximetilcelulose Sódica/químicaRESUMO
The rational design of porous carbon materials and hydrogel electrolytes with excellent mechanical properties and low-temperature tolerance are significance for the development of flexible solid-state supercapacitors. In this study, we introduce a novel methodology for synthesizing SiC/N, S-doped porous carbon nanosheets from bamboo pulp red liquor (RL). We leverage the SiO2 and the sodium salt in RL as templates and sodium lignosulfonate as sulfur dopants for the pyrolysis process and use NH4Cl as a nitrogen dopant. This innovative approach results in a material with a remarkable specific surface area of 1659.19 m2 g-1, a specific capacitance of 308 F g-1 at a current density of 1 A g-1 and excellent stability. Additionally, we harness alkali lignin extracted from RL to enhance a poly (vinyl alcohol) (PVA) matrix, creating a gel electrolyte with low-temperature tolerance and outstanding mechanical properties. A flexible solid-state supercapacitor, which incorporates our electrodes and gel electrolyte, demonstrates high energy density (5.2 W h kg-1 at 251 W kg-1 power density). Impressively, it maintains 82 % of its capacitance over 10,000 cycles of charge and discharge. This provides a new solution for the development of flexible solid-state supercapacitors.
Assuntos
Lignina , Dióxido de Silício , Temperatura , Carbono , Eletrólitos , SódioRESUMO
Alginate organohydrogels prepared in water/alcohol mixtures play an important role in electronic and superconductor applications in low-temperature environments. The study deals with the preparation of Ca-alginate organohydrogels and the analysis of their equilibrium swelling and mechanical properties at sub-zero temperatures. It is shown that the equilibrium degree of swelling at room temperature is noticeably affected by the concentration of co-solvents (methanol, ethanol, and 2-propanol) in the mixtures and the number of carbon atoms in the co-solvent molecules. Mechanical properties are studied in small-amplitude oscillatory tests. The data are fitted with a model that involves three material parameters. The influence of temperature is investigated in temperature-sweep oscillatory tests under a cooling-heating program, where a noticeable difference is observed between the storage and loss moduli under cooling and heating (the hysteresis curves). The hysteresis areas are affected by the cooling/heating rate and the number of carbon atoms in the co-solvents.