Tuning the corona-core ratio of polyplex micelles for selective oligonucleotide delivery to hepatocytes or hepatic immune cells.

Targeted delivery of oligonucleotides or small molecular drugs to hepatocytes, the liver's parenchymal cells, is challenging without targeting moiety due to the highly efficient mononuclear phagocyte system (MPS) of the liver. The MPS comprises Kupffer cells and specialized sinusoidal endothelial cells, efficiently clearing nanocarriers regardless of their size and surface properties. Physiologically, this non-parenchymal shield protects hepatocytes; however, these local barriers must be overcome for drug delivery. Nanocarrier structural properties strongly influence tissue penetration, in vivo pharmacokinetics, and biodistribution profile. Here we demonstrate the in vivo biodistribution of polyplex micelles formed by polyion complexation of short interfering (si)RNA with modified poly(ethylene glycol)-block-poly(allyl glycidyl ether) (PEG-b-PAGE) diblock copolymer that carries amino moieties in the side chain. The ratio between PEG corona and siRNA complexed PAGE core of polyplex micelles was chemically varied by altering the degree of polymerization of PAGE. Applying Raman-spectroscopy and dynamic in silico modeling on the polyplex micelles, we determined the corona-core ratio (CCR) and visualized the possible micellar structure with varying CCR. The results for this model system reveal that polyplex micelles with higher CCR, i.e., better PEG coverage, exclusively accumulate and thus allow passive cell-type-specific targeting towards hepatocytes, overcoming the macrophage-rich reticuloendothelial barrier of the liver.

Nanoparticles with dense poly(ethylene glycol) coatings with near neutral charge are maximally transported across lymphatics and to the lymph nodes.

Lymphatic vessels have recently been shown to effectively deliver immune modulatory therapies to the lymph nodes, which enhances their therapeutic efficacy. Prior work has shown that lymphatics transport 10-250 nm nanoparticles from peripheral tissues to the lymph node. However, the surface chemistry required to maximize this transport is poorly understood. Here, we determined the effect of surface poly(ethylene glycol) (PEG) density and size on nanoparticle transport across lymphatic endothelial cells (LECs) by differentially PEGylated model polystyrene nanoparticles. Using an established in-vitro lymphatic transport model, we found PEGylation improved the transport of 100 and 40 nm nanoparticles across LECs 50-fold compared to the unmodified nanoparticles and that transport is maximized when the PEG is in a dense brush conformation or high grafting density (Rf/D = 4.9). We also determined that these trends are not size-dependent. PEGylating 40 nm nanoparticles improved transport efficiency across LECs 68-fold compared to unmodified nanoparticles. We also found that PEGylated 100 nm and 40 nm nanoparticles accumulate in lymph nodes within 4 h after intradermal injection, while unmodified nanoparticles accumulated minimally. Densely PEGylated nanoparticles traveled the furthest distance from the injection site and densely PEGylated 40 nm nanoparticles had maximum accumulation in the lymph nodes compared to low density PEGylated and unmodified nanoparticles. Finally, we determined that nanoparticles are transported via both paracellular and transcellular mechanisms, and that PEG conformation modulates the cellular transport mechanisms. Our results suggest that PEG conformation is crucial to maximize nanoparticle transport across LECs and into lymphatic vessels, making PEG density a crucial design. Optimizing PEG density on nanoparticle formulations has the potential to enhance immunotherapeutic and vaccine outcomes. STATEMENT OF SIGNIFICANCE: Lymphatic vessels are an emerging target for drug delivery both in the context of modulating immune responses and enhancing bioavailability by avoiding first pass hepatic metabolism after oral delivery. Lymphatic vessels are the natural conduits from peripheral tissues to the lymph nodes, where the adaptive immune response is shaped, and eventually to systemic circulation via the thoracic duct. Lymphatics can be targeted via nanoparticles, but the surface chemistry required to maximize nanoparticle transport by lymphatics vessels remains poorly understood. Here, we demonstrate that coating nanoparticles with hydrophilic polyethylene glycol (PEG) effectively enhances their transport across lymphatic endothelial cells in vitro and in vivo and that both paracellular and micropinocytosis mechanisms underly this transport. We found that dense PEG coatings maximize lymphatic transport of nanoparticles, thus providing new material design criteria for lymphatic targeted drug delivery.

Effect of Poly(ethylene glycol) (PEG) Surface Density on the Fate and Antitumor Efficacy of Redox-Sensitive Hybrid Nanoparticles.

The effects of poly(ethylene glycol) (PEG) on improving the biological compatibility and circulation time of nanocarriers are determined by the surface density of PEG on nanoparticles. PEG with high surface density on nanocarriers has greater accumulation in tumor tissues. However, this impairs the release of drugs loaded in the nanoparticles in the tumor tissues. The relations and internal regularities between the controlled stripping of PEG of nanoparticles and its fate and antitumor efficacy in vivo remain unsolved. Redox-sensitive hybrid nanoparticles coated with varied PEG densities were prepared by blending a redox-sensitive polymer of DLPE-SS-MPEG. To keep identical nanoproperties, these nanoparticles were prepared with a similar size distribution of around 100 nm. The effects of controlled stripping of PEG on antitumor activities of nanoparticles were then investigated. As the PEG surface density increased, lower cellular internalization by tumor cells was observed. However, nanoparticles with higher controlled stripping of PEG showed greater accumulation in tumor tissues and advanced antitumor activities in vivo.

The effect of surface poly(ethylene glycol) length on in vivo drug delivery behaviors of polymeric nanoparticles.

Engineering nanoparticles of reasonable surface poly(ethylene glycol) (PEG) length is important for designing efficient drug delivery systems. Eliminating the disturbance by other nanoproperties, such as size, PEG density, etc., is crucial for systemically investigating the impact of surface PEG length on the biological behavior of nanoparticles. In the present study, nanoparticles with different surface PEG length but similar other nanoproperties were prepared by using poly(ethylene glycol)-block-poly(ε-caprolactone) (PEG-b-PCL) copolymers of different molecular weights and incorporating different contents of PCL3500 homopolymer. The molecular weight of PEG block in PEG-PCL was between 3400 and 8000 Da, the sizes of nanoparticles were around 100 nm, the terminal PEG density was controlled at 0.4 PEG/nm2 (or the frontal PEG density was controlled at 0.16 PEG/nm2). Using these nanoproperties well-designed nanoparticles, we demonstrated PEG length-dependent changes in the biological behaviors of nanoparticles and exhibited nonmonotonic improvements as the PEG molecular weight increased from 3400 to 8000 Da. Moreover, under the experimental conditions, we found nanoparticles with a surface PEG length of 13.8 nm (MW = 5000 Da) significantly decreased the absorption with serum protein and interaction with macrophages, which led to prolonged blood circulation time, enhanced tumor accumulation and improved antitumor efficacy. The present study will help to establish a relatively precise relationship between surface PEG length and the in vivo behavior of nanoparticles.

Inhibition of intrinsic coagulation improves safety and tumor-targeted drug delivery of cationic solid lipid nanoparticles.

Cationic solid lipid nanoparticles (cSLNs) are promising nanoparticles for controlled drug delivery. Increasing surface charge and/or reducing PEG density enhance cellular uptake of cSLNs in vitro, but for unknown reasons fail to improve drug delivery in vivo. Herein, we show that cSLNs present a risk for systemic platelet activation and aggregation in vivo, and this toxic effect can be significantly augmented by increasing the surface charge and reducing the PEG density. Furthermore, thrombotic toxicity significantly reduces blood circulation time and in vivo cellular uptake of cSLNs. Mechanistic studies revealed that the intrinsic coagulation pathway is responsible for cSLN-induced platelet activation. Importantly, pretreatment of the recipient mice with heparin, a clinically-approved intrinsic coagulation inhibitor, was highly effective in preventing toxicity, prolonging the circulation time of cSLNs, and improving cSLN-based antitumor drug delivery and therapeutic efficacy in tumor-bearing mice. This study offers a useful strategy for improving both the safety and efficacy of cSLN-based anticancer therapies.

Engineering Well-Characterized PEG-Coated Nanoparticles for Elucidating Biological Barriers to Drug Delivery.

Poly(ethylene glycol) (PEG) coatings can substantially reduce nanoparticle uptake and clearance by immune cells as well as nonspecific interactions with the biological environment, thus potentially improving nanoparticle circulation times and biodistribution in target tissues such as tumors. Naturally, the "stealth" properties of PEG coatings are critically dependent on the density and conformation of surface PEG chains. However, there are significant technical hurdles to both generating sufficiently dense PEG coatings on nanoparticles and precisely characterizing their PEG grafting densities. Here, we describe methods for preparing PEGylated polymeric nanoparticles with precisely tunable PEG coatings without the use of organic solvents, quantifying PEGylation efficiency and density using a standard fluorescence assay, and evaluating nanoparticle uptake by immune cells using flow cytometry.

Brain-Penetrating Nanoparticles for Analysis of the Brain Microenvironment.

The past decade has witnessed explosive growth in the development of nanoparticle-based therapies for the treatment of neurological disorders and diseases. The systemic delivery of therapeutic carriers to the central nervous system (CNS) is hindered by both the blood-brain barrier (BBB) and the porous and electrostatically charged brain extracellular matrix (ECM), which acts as a steric and adhesive barrier. Therapeutic delivery to the brain is influenced by changes in the brain microenvironment, which can occur as a function of physiology, biology, pathology, and developmental age. Brain-penetrating nanoparticles (BPNs) are an optimal platform not only for therapeutic delivery to the brain, but also for evaluating changes in the brain microenvironment. BPNs possess both the capability to readily move within their local environment to survey their surroundings and the ability to reach the diffuse disease cells often associated with CNS disorders. To achieve effective delivery of BPNs to specific locations within the brain requires careful control over the nanoparticle's transport properties. Here, we describe the process of conjugating a dense layer of poly(ethylene glycol) (PEG) to the surface of nonbiodegradable nanoparticles to achieve brain-penetrating capabilities.

Non-specific binding and steric hindrance thresholds for penetration of particulate drug carriers within tumor tissue.

Therapeutic nanoparticles (NPs) approved for clinical use in solid tumor therapy provide only modest improvements in patient survival, in part due to physiological barriers that limit delivery of the particles throughout the entire tumor. Here, we explore the thresholds for NP size and surface poly(ethylene glycol) (PEG) density for penetration within tumor tissue extracellular matrix (ECM). We found that NPs as large as 62nm, but less than 110nm in diameter, diffused rapidly within a tumor ECM preparation (Matrigel) and breast tumor xenograft slices ex vivo. Studies of PEG-density revealed that increasing PEG density enhanced NP diffusion and that PEG density below a critical value led to adhesion of NP to ECM. Non-specific binding of NPs to tumor ECM components was assessed by surface plasmon resonance (SPR), which revealed excellent correlation with the particle diffusion results. Intravital microscopy of NP spread in breast tumor tissue confirmed a significant difference in tumor tissue penetration between the 62 and 110nm PEG-coated NPs, as well as between PEG-coated and uncoated NPs. SPR assays also revealed that Abraxane, an FDA-approved non-PEGylated NP formulation used for cancer therapy, binds to tumor ECM. Our results establish limitations on the size and surface PEG density parameters required to achieve uniform and broad dispersion within tumor tissue and highlight the utility of SPR as a high throughput method to screen NPs for tumor penetration.

Nanoparticles coated with high molecular weight PEG penetrate mucus and provide uniform vaginal and colorectal distribution in vivo.

AIM: We previously reported that nanoparticles (NPs) coated with 10 kDa PEG were mucoadhesive. Here, we demonstrate that by increasing the surface density, PEG with molecular weight (MW) as high as 40 kDa can be used as a mucoinert NP surface coating. MATERIALS & METHODS: We compared two sets of reaction conditions for coating model polystyrene NPs with 10 kDa PEG and used optimized conditions to coat NPs with PEG as high as 40 kDa in MW. We then characterized NP transport in human cervicovaginal mucus ex vivo. We further administered PEG-coated NPs to the mouse cervicovaginal tract and colorectum to assess mucosal distribution in vivo. RESULTS & CONCLUSION: We demonstrate here that PEG with MW as high as 40 kDa can be densely grafted to the surface of NP to prevent interactions with mucus. NP coated with 10-40 kDa PEG rapidly diffused through human cervicovaginal mucus ex vivo, and uniformly lined the mouse colorectal and vaginal epithelium in vivo.

Determination of polymeric micelles' structural characteristics, and effect of the characteristics on pharmacokinetic behaviors.

We evaluated structural factors characterizing PEG-b-P(Asp-Bzl) micelles including core size, aggregation number (Nagg), and core surface PEG density by means of small-angle X-ray scattering (SAXS), field flow fractionation with multi-angle light scattering (FFF-MALS) analysis, and DLS. Furthermore, we evaluated the stability of PEG-b-P(Asp-Bzl) micelles by means of GPC. This paper reports the correlation between the evaluated micelles' structural factors and the micelles' behaviors including the micelles' in vivo pharmacokinetic behaviors. One micelle PEG(12)-b-P(Asp-Bzl) (PEG=12,000) exhibited a high core surface density (~0.99 chain/nm(2)). In these circumstances, PEG(12)-b-P(Asp-Bzl) micelles exhibited a highly stretched PEG brush form. However, the evaluated core surface PEG densities could not fully explain the micelles' in vivo pharmacokinetic behaviors. In contrast, GPC will become a strong tool for predicting PEG(12)-b-P(Asp-Bzl) micelles' in vivo behaviors, as well as the micelles' in vitro behaviors. The stability results correlated strongly with the area-under-the-curve (AUC) values of PEG-b-P(Asp-Bzl) micelles' in vivo pharmacokinetics. Finally, we evaluated PEG(12)-b-P(Asp-Bzl) micelles' most effective structural factor for determining the micelles' behaviors, and the micelles' outermost shell surface's PEG density (DOS, PEG) correlated with the micelles' behaviors. We revealed that the evaluated DOS, PEG is the most important factor for understanding PEG(12)-b-P(Asp-Bzl) micelles' behaviors.

Scalable method to produce biodegradable nanoparticles that rapidly penetrate human mucus.

Mucus typically traps and rapidly removes foreign particles from the airways, gastrointestinal tract, nasopharynx, female reproductive tract and the surface of the eye. Nanoparticles capable of rapid penetration through mucus can potentially avoid rapid clearance, and open significant opportunities for controlled drug delivery at mucosal surfaces. Here, we report an industrially scalable emulsification method to produce biodegradable mucus-penetrating particles (MPP). The emulsification of diblock copolymers of poly(lactic-co-glycolic acid) and polyethylene glycol (PLGA-PEG) using low molecular weight (MW) emulsifiers forms dense brush PEG coatings on nanoparticles that allow rapid nanoparticle penetration through fresh undiluted human mucus. In comparison, conventional high MW emulsifiers, such as polyvinyl alcohol (PVA), interrupts the PEG coating on nanoparticles, resulting in their immobilization in mucus owing to adhesive interactions with mucus mesh elements. PLGA-PEG nanoparticles with a wide range of PEG MW (1, 2, 5, and 10 kDa), prepared by the emulsification method using low MW emulsifiers, all rapidly penetrated mucus. A range of drugs, from hydrophobic small molecules to hydrophilic large biologics, can be efficiently loaded into biodegradable MPP using the method described. This readily scalable method should facilitate the production of MPP products for mucosal drug delivery, as well as potentially longer-circulating particles following intravenous administration.