Constructing Nano-Interlayer Inhibiting Interfacial Degradation toward High-Voltage PEO-Based All-Solid-State Lithium Batteries.

The interfacial instability between PEO-based solid electrolyte (SPE) and high-voltage cathode materials inhibits the longevity of high-energy-density all-solid-state polymer lithium metal batteries (ASSPLBs). Herein, for the first time it is demonstrated, that contact loss caused by gas generation from interfacial side reactions between the high-voltage cathode and solid polymer electrolyte (SPE) can also arise in ASSPLBs. To alleviate the interfacial side reactions, a LiNb0.6Ti0.5O3 (LNTO) layer is well coated on LiNi0.83Co0.07Mn0.1O2 (NCM83), denoted as (CNCM83). The LNTO layer with low electronic conductivity reduces the decomposition drive force of SPE. Furthermore, Ti and Nb in the LNTO layer spontaneously migrate inside the NCM83 surface to form a strong Ti/Nb─O bond, stalling oxygen evolution in high-voltage cathodes. The interfacial degradation phenomena, including SPE decomposition, detrimental phase transition and intragranular cracks of NCM83, and void formation between cathode and SPE, are effectively mitigated by the LNTO layer. Therefore, the growth rate of interfacial resistance (RCEI) decreases from 37.6 Ω h-0.5 for bare NCM83 to 2.4 Ω h-0.5 for CNCM83 at 4.2 V. Moreover, 4.2 V PEO-based ASSPLBs achieve impressive cyclability with high capacity retention of 135 mAh g-1 (75%) even after 300 cycles at 0.5 C.

Characterization and In Vitro Behavior of PEO Coated Mg Modified with Antibacterial Ag(I) and Cu(II) Complexes.

The use of Mg-based biomaterials with a number of their advantageous properties are overshadowed by uncontrollable metal corrosion. Moreover, the use of implants goes alongside with the threat of pathogens-associated complications. In this study, PEO coated Mg biomaterial loaded with antibacterial Ag(I) and Cu(II) complexes is produced and tested to meet both appropriate protective characteristics as well as sufficient level of antibacterial activity. To achieve a suitable level of anticorrosion protection phosphate and fluoride-phosphate electrolytes are used in the PEO process. Investigation of the surface thickness and morphology done by means of cross-section analysis and scanning electron microscopy (SEM), as well as electrochemical impedance spectroscopy (EIS) assay show precedence of the fluoride containing PEO coating and make it the material of choice for further modification with Ag(I) and Cu(II) complexes. The presence of the complexes on the PEO surface is confirmed by energy dispersive X-ray spectroscopy (EDX). X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and glow discharge optical emission spectroscopy (GDOES) are used to estimate the complexes' chemical state and depth of penetration in the coating surface. Based on the results of antibacterial assay, the modified coatings are found to be active against both Gram-positive and Gram-negative bacteria.

A facile and scalable method to synthesize PEGylated PDMAEMA for gene delivery.

In recent years, cationic polymer vectors have been viewed as a promising method for delivering nucleic acids. With the advancement of synthetic polymer chemistry, we can control chemical structures and properties to enhance the efficacy of gene delivery. Herein, a facile, cost-effective, and scalable method was developed to synthesize PEGylated PDMAEMA polymers (PEO-PDMAEMA-PEO), where PEGylation could enable prolonged polyplexes circulation time in the blood stream. Two polymers of different molecular weights were synthesized, and polymer/eGFP polyplexes were prepared and characterized. The correlation between polymers' molecular weight and physicochemical properties (size and zeta potential) of polyplexes was investigated. Lipofectamine 2000, a commercial non-viral transfection reagent, was used as a standard control. PEO-PDMAEMA-PEO with higher molecular weight exhibited slightly better transfection efficiency than Lipofectamine 2000, and the cytotoxicity study proved that it could function as a safe gene vector. We believe that PEO-PDMAEMA-PEO could serve as a model to investigate more potential in the gene delivery area.

Fractional-Order Electrical Modeling of Aluminum Coated via Plasma Electro-Oxidation and Thermal Spray Methods to Optimize Radiofrequency Medical Devices.

Active medical devices rely on a source of energy that is applied to the human body for specific purposes such as electrosurgery, ultrasounds for breaking up kidney stones (lithotripsy), laser irradiation, and other medical techniques and procedures that are extensively used. These systems must provide adequate working power with a commitment not to produce side effects on patients. Therefore, the materials used in these devices must effectively transmit energy, allow for security control, sense real-time variations in case of any issues, and ensure the implementation of closed-loop systems for control. This work extends to the experimental data adjustment of some different coating techniques based on plasma electro-oxidation (PEO) and thermal spray (TS) using fractional-order models. According to the physical structure of the coating in different coating techniques, Cole family models were selected. The experimental data were obtained by means of a vector network analyzer (VNA) in the frequency spectrum from 0.3 MHz to 5 MHz. The results show that some models from the Cole family (the single-dispersion model and inductive model) offered a goodness of fit to the experimental impedance in terms of RMSE error and a squared error R2 close to unity. The use of this type of fractional-order electrical model allows an adjustment with a very small number of elements compared to integer-order models, facilitating its use and a consequent reduction in instrumentation cost and the development of control devices that are more robust and easily miniaturized for embedded applications. Additionally, fractional-order models allow for more accurate assessment in industrial and medical applications.

Network Security Prediction of Industrial Control Based on Projection Equalization Optimization Algorithm.

This paper predicts the network security posture of an ICS, focusing on the reliability of Industrial Control Systems (ICSs). Evidence reasoning (ER) and belief rule base (BRB) techniques are employed to establish an ICS network security posture prediction model, ensuring the secure operation and prediction of the ICS. This model first integrates various information from the ICS to determine its network security posture value. Subsequently, through ER iteration, information fusion occurs and serves as an input for the BRB prediction model, which necessitates initial parameter setting by relevant experts. External factors may influence the experts' predictions; therefore, this paper proposes the Projection Equalization Optimization (P-EO) algorithm. This optimization algorithm updates the initial parameters to enhance the prediction of the ICS network security posture through the model. Finally, industrial datasets are used as experimental data to improve the credibility of the prediction experiments and validate the model's predictive performance in the ICS. Compared with other methods, this paper's prediction model demonstrates a superior prediction accuracy. By further comparing with other algorithms, this paper has a certain advantage when using less historical data to make predictions.

Which Constituents Determine the Antioxidant Activity and Cytotoxicity of Garlic? Role of Organosulfur Compounds and Phenolics.

Garlic is a vegetable with numerous pro-health properties, showing high antioxidant capacity, and cytotoxicity for various malignant cells. The inhibition of cell proliferation by garlic is mainly attributed to the organosulfur compounds (OSCs), but it is far from obvious which constituents of garlic indeed participate in the antioxidant and cytotoxic action of garlic extracts. This study aimed to obtain insight into this question by examining the antioxidant activity and cytotoxicity of six OSCs and five phenolics present in garlic. Three common assays of antioxidant activity were employed (ABTS● decolorization, DPPH● decolorization, and FRAP). Cytotoxicity of both classes of compounds to PEO1 and SKOV-3 ovarian cancer cells, and MRC-5 fibroblasts was compared. Negligible antioxidant activities of the studied OSCs (alliin, allicin, S-allyl-D-cysteine, allyl sulfide, diallyl disulfide, and diallyl trisulfide) were observed, excluding the possibility of any significant contribution of these compounds to the total antioxidant capacity (TAC) of garlic extracts estimated by the commonly used reductive assays. Comparable cytotoxic activities of OSCs and phenolics (caffeic, p-coumaric, ferulic, gallic acids, and quercetin) indicate that both classes of compounds may contribute to the cytotoxic action of garlic.

Functional CNTs@EMIM+ -Br- Electrode Enabling Polysulfides Confining and Deposition Regulating for Solid-State Li-Sulfur Battery.

With an extremely high theoretical energy density, poly(ethylene oxide) (PEO)-based solid-state lithium-sulfur (Li-S) batteries are emerging as one of the most feasible and safest battery storage systems. However, the long-term cycling performance is severely impeded by polysulfides (Li2 Sn , n = 4-8) shuttling and terrible electrode passivation from the electronic insulating Li2 S. Here, a novel cathode through chemically grafted 1-Ethyl-3-methylimidazolium bromide (EMIM+ -Br- ) to carbon nanotube (CNTs) for PEO-based Li-S batteries is reported (CNTs@EMIM-Br/S). Concretely, bi-functional mediator EMIM+ -Br- not only inhibits the polysulfides shuttling by strong chemical interactions via EMIM+ , but also facilitates the electrochemical kinetics for promoting the formation of 3D particulate Li2 S through high donor anion (Br- ). Satisfactorily, dual-function CNTs@EMIM-Br/S cathode exhibits high sulfur utilization with the capacity of up to 1298 mAh g-1 , and keeps high capacity retention of 80.2% at 0.2 C after 350 cycles, exceeding that of many reported PEO-based solid-state Li-S batteries. This work will open a new door for rationally designed architecture to enable the practical applications of advanced Li-S batteries.

A Universal Room-Temperature 3D Printing Approach Towards porous MOF Based Dendrites Inhibition Hybrid Solid-State Electrolytes.

Hybrid solid-state electrolytes (HSSEs) provide new opportunities and inspiration for the realization of safer, higher energy-density metal batteries. The innovative application of 3-dimensional printing in the electrochemical field, especially in solid-state electrolytes, endows energy storage devices with fascinating characteristics. In this paper, effective dendrite-inhibited PEO/MOFs HSSEs is innovatively developed through universal room-temperature 3-dimensional printing (RT-3DP) strategy. The prepared HSSEs display enhanced dendrite inhibition due to the porous MOF filler promoting homogeneity of lithium deposition and the formation of C-OCO3 Li, ROLi, LiF mesophases, which further improve the migration of Li+ in PEO chain and comprehensive performances. This universal strategy realizes the fabrication of different slurry components (PEO with ZIF-67, MOF-74, UIO-66, ZIF-8 fillers) HSSEs at RT environment, providing new inspirations for the exploration of next-generation advanced solid-state batteries.

Comparison of Antioxidant and Antiproliferative Effects of Various Forms of Garlic and Ramsons.

Garlic is known to be rich in antioxidants, inhibit the proliferation of various cancer cells, and hamper cancer formation and growth, but various forms of garlic can differ greatly in these respects. This study aimed to compare the antioxidant properties of acetone, ethanol, and aqueous extracts of fresh Polish and Spanish garlic, black and granulated garlic, as well as fresh and dried ramsons. Extracts of black and granulated garlic showed the lowest total antioxidant capacity (TAC). The content of phenolic compounds correlated with TAC measured by ABTS• decolorization and FRAP methods, and with the results of FRAP and DPPH• decolorization assays. Garlic extracts inhibited the proliferation of PEO1 and SKOV3 ovarian cancer cells and, usually to a smaller extent, MRC-5 fibroblasts. PBS extracts of fresh Spanish garlic showed the highest potency for inhibition of proliferation of PEO1 cells (IC50 of 0.71 µg extract dry mass/100 µL medium). No significant correlation was found between the potency for inhibition of proliferation and the content of phenolics or flavonoids, confirming that phenolics are the main determinants of TAC but do not contribute significantly to the antiproliferative effects of garlic.

A Superior Corrosion Protection of Mg Alloy via Smart Nontoxic Hybrid Inhibitor-Containing Coatings.

The increase of corrosion resistance of magnesium and its alloys by forming the smart self-healing hybrid coatings was achieved in this work in two steps. In the first step, using the plasma electrolytic oxidation (PEO) treatment, a ceramic-like bioactive coating was synthesized on the surface of biodegradable MA8 magnesium alloy. During the second step, the formed porous PEO layer was impregnated with a corrosion inhibitor 8-hydroxyquinoline (8-HQ) and bioresorbable polymer polycaprolactone (PCL) in different variations to enhance the protective properties of the coating. The composition, anticorrosion, and antifriction properties of the formed coatings were studied. 8-HQ allows controlling the rate of material degradation due to the self-healing effect of the smart coating. PCL treatment of the inhibitor-containing layer significantly improves the corrosion and wear resistance and retains an inhibitor in the pores of the PEO layer. It was revealed that the corrosion inhibitor incorporation method (including the number of steps, impregnation, and the type of solvent) significantly matters to the self-healing mechanism. The hybrid coatings obtained by a 1-step treatment in a dichloromethane solution containing 6 wt.% polycaprolactone and 15 g/L of 8-HQ are characterized by the best corrosion resistance. This coating demonstrates the lowest value of corrosion current density (3.02 × 10-7 A cm-2). The formation of the hybrid coating results in the corrosion rate decrease by 18 times (0.007 mm year-1) as compared to the blank PEO layer (0.128 mm year-1). An inhibitor efficiency was established to be 83.9%. The mechanism of corrosion protection of Mg alloy via smart hybrid coating was revealed.

Preferential Oxycodone Loss of Physically Manipulated Abuse Deterrent Oxycodone HCl Extended Release Tablets Prepared for Nasal Insufflation Studies.

A method to reproducibly mill abuse deterrent oxycodone hydrochloride (HCl) extended release (ER) tablets was developed for a nasal insufflation pharmacokinetic (PK) study. Several comminution methods were explored before determining that a conical mill resulted in controlled milling of tablets to a size range equal to or below 1000 µm. However, milling resulted in significant loss of oxycodone from abuse deterrent oxycodone HCl ER tablets compared to minimal oxycodone loss from oxycodone HCl immediate release (IR) tablets. Characterization of milled tablet powder showed that loss of oxycodone was not attributed to analytical procedures or oxycodone phase change during high intensity milling processes. The content uniformity of oxycodone in the milled tablet powder varied when ER and IR tablets were milled to a particle size distribution equal to or below 500 µm but did not vary when particles were sized above 500 µm to equal to or below 1000 µm. In addition, the initial excipient weight to drug substance weight ratio impacted the amount of oxycodone lost from the respective formulation. However, dissolution demonstrated that when oxycodone HCl ER tablets are milled, differences in excipient weight to drug substance weight ratio and particle size distribution of milled tablets did not result in significantly different release of oxycodone.

Understanding factors relevant to poor sleep and coping methods in people with schizophrenia.

BACKGROUND: Sleep disruption is pervasive in people with schizophrenia, but few studies have explored their sleep experiences. This study aims to identify factors relevant to sleep problems and explore coping methods used by community-dwelling people with schizophrenia. METHODS: Eighteen participants with schizophrenia were recruited from three mental health centers in Taiwan. They completed a semi-structured interview and the Pittsburgh Sleep Quality Index (PSQI) assessment. The Person-Environment-Occupation model offered a framework to assess factors related to sleep. Thematic analysis was used for the qualitative data analysis. RESULTS: Factors related to sleep were classified under person, environment, and occupation domains. The person domain included three subthemes: psychiatric symptoms, unpleasant emotions, and frustration about sleep. The environment domain included three subthemes: sensory intrusions from the environment, quality of bedding, and roommates. The occupation domain included sleep interruption and sleep preparation. There were notable discrepancies in sleep quality between the participants' narratives and their PSQI global scores. Regarding coping methods for poor sleep, sleep medication was the primary strategy while some participants also used other strategies, such as modifying the environment, adjusting routines, or engaging in activities that improve sleep quality. CONCLUSIONS: Psychiatric symptoms and nightmares were identified as unique sleep disruptions in people with schizophrenia, and poor economic status was also found to impact their sleep. The sleep quality of people with schizophrenia tends to be poor, as identified by the PSQI, even though they may have positive perceptions of their sleep quality. Our participants appeared to prefer to take hypnotics to address their sleep problems, which may be due to limited knowledge about alternatives. Mental health professionals are encouraged to receive training in the application of non-pharmacological approaches to support their clients' issues related to sleep.

Novel biallelic mutations in POLG gene: large deletion and missense variant associated with PEO.

BACKGROUND: Mitochondrial disorders are clinically heterogeneous diseases associated with impaired oxidative phosphorylation (OXPHOS) activity. POLG, which encodes the DNA polymerase-γ (Polγ) catalytic subunit, is the most commonly mutated nuclear gene associated with mitochondrial disorders. METHODS: We carried out whole-exome sequencing (WES) to identify the gene associated with progressive external ophthalmoplegia (PEO). We then performed histopathological analyses, assessed mitochondrial biology, and executed functional studies to evaluate the potential pathogenicity of the identified genetic mutations. RESULTS: Novel biallelic POLG mutations, including a large deletion mutation (exons 7-21) and a missense variant c.1796C>T (p.Thr599Ile) were detected in the proband. Histopathological analysis of a biopsied muscle sample from this patient revealed the presence of approximately 20% COX-negative fibers. Bioinformatics analyses confirmed that the detected mutations were pathogenic. Furthermore, levels of mitochondrial complex I, II, and IV subunit protein expressions were found to be decreased in the proband, and marked impairment of mitochondrial respiration was evident in cells harboring these mutations. CONCLUSION: This study expands the spectrum of known POLG variants associated with PEO and advances current understanding regarding the structural and functional impacts of these mutations.

Toward Tailoring the Degradation Rate of Magnesium-Based Biomaterials for Various Medical Applications: Assessing Corrosion, Cytocompatibility and Immunological Effects.

Magnesium (Mg)-based biomaterials hold considerable promise for applications in regenerative medicine. However, the degradation of Mg needs to be reduced to control toxicity caused by its rapid natural corrosion. In the process of developing new Mg alloys with various surface modifications, an efficient assessment of the relevant properties is essential. In the present study, a WE43 Mg alloy with a plasma electrolytic oxidation (PEO)-generated surface was investigated. Surface microstructure, hydrogen gas evolution in immersion tests and cytocompatibility were assessed. In addition, a novel in vitro immunological test using primary human lymphocytes was introduced. On PEO-treated WE43, a larger number of pores and microcracks, as well as increased roughness, were observed compared to untreated WE43. Hydrogen gas evolution after two weeks was reduced by 40.7% through PEO treatment, indicating a significantly reduced corrosion rate. In contrast to untreated WE43, PEO-treated WE43 exhibited excellent cytocompatibility. After incubation for three days, untreated WE43 killed over 90% of lymphocytes while more than 80% of the cells were still vital after incubation with the PEO-treated WE43. PEO-treated WE43 slightly stimulated the activation, proliferation and toxin (perforin and granzyme B) expression of CD8+ T cells. This study demonstrates that the combined assessment of corrosion, cytocompatibility and immunological effects on primary human lymphocytes provide a comprehensive and effective procedure for characterizing Mg variants with tailorable degradation and other features. PEO-treated WE43 is a promising candidate for further development as a degradable biomaterial.

Structural Reorganization of Imidazolium Ionic Liquids Induced by Pressure-Enhanced Ionic Liquid-Polyethylene Oxide Interactions.

Mixtures of polyethylene oxide (PEO, M.W.~900,000) and imidazolium ionic liquids (ILs) are studied using high-pressure Fourier-transform infrared spectroscopy. At ambient pressure, the spectral features in the C-H stretching region reveal that PEO can disturb the local structures of the imidazolium rings of [BMIM]+ and [HMIM]+. The pressure-induced phase transition of pure 1-butyl-3-methylimidazolium bromide ([BMIM]Br) is observed at a pressure of 0.4 GPa. Pressure-enhanced [BMIM]Br-PEO interactions may assist PEO in dividing [BMIM]Br clusters to hinder the aggregation of [BMIM]Br under high pressures. The C-H absorptions of pure 1-hexyl-3-methylimidazolium bromide [HMIM]Br do not show band narrowing under high pressures, as observed for pure [BMIM]Br. The band narrowing of C-H peaks is observed at 1.5 GPa for the [HMIM]Br-PEO mixture containing 80 wt% of [HMIM]Br. The presence of PEO may reorganize [HMIM]Br clusters into a semi-crystalline network under high pressures. The differences in aggregation states for ambient-pressure phase and high-pressure phase may suggest the potential of [HMIM]Br-PEO (M.W.~900,000) for serving as optical or electronic switches.

Surface Properties of Graphene Functionalized TiO2/nHA Hybrid Coatings Made on Ti6Al7Nb Alloys via Plasma Electrolytic Oxidation (PEO).

Nano-hydroxyapatite (nHA)-matrix coatings containing graphene nanosheets (GNS)-nHA were coated on Ti6Al7Nb alloys by plasma electrolytic oxidation (PEO) treatment for the improvement of their surface properties. Crystallographic properties, functional groups, and elemental analysis of coatings were characterized by XRD, ATR-FTIR, and EDS analysis. Surface morphological changes of the coated surfaces were investigated by AFM and SEM. The electrochemical corrosion behavior of the coatings was examined by using the potentiodynamic scanning (PDS) tests under in-vitro conditions in simulated body fluid (SBF). The results showed that the GNS was successfully deposited in ceramic matrix coatings on Ti6Al7Nb alloys. Also, the microstructural observations revealed that the coatings have a porous and rough structure. The XRD and ATR-FTIR quantitative analysis have proved the appearance of HA and GNS in the coating layers. An increase in the coating thickness, surface hardness, and anatase/rutile transformation rate was determined, while the GNS ratio in the coating layers was increased. The microhardness of the nHA coating reinforced with 1.5 wt% GNS was measured at 862 HV, which was significantly higher than that of GNS-free (only nHA) coating (584 HV). The best in-vitro resistance to corrosion in SBF was observed in the nHA/1.5GNS wt% coating.

The Unusual Conductivity of Na+ in PEO-Based Statistical Copolymer Solid Electrolytes: When Less Means More.

The low conductivity of Na+ electrolytes in solid polymer electrolytes (SPEs) curtails the development of Na polymer batteries. In this study, NaClO4 (3-24 wt %, 90-9:1 O:Na) is dissolved in statistical copolymers of ethylene oxide (EO) and propylene oxide (PO) (0-20 mol %). Remarkably, the conductivity of these SPEs increases as the concentration of Na+ decreases, thus departing from the usual Nernstian behavior. Using a combination of calorimetric measurements and molecular dynamic simulations, this unusual phenomenon is attributed to the presence of physical cross-links generated by Na+ . As a result, polymers containing a low salt concentration (3 wt %) display a drastically enhanced ionic conductivity (up to 0.2 10-4  S cm-1 at 25 °C), thus paving the way for the design of all-solid-state PEO-based sodium batteries operational at room temperature.

Biallelic C1QBP Mutations Cause Severe Neonatal-, Childhood-, or Later-Onset Cardiomyopathy Associated with Combined Respiratory-Chain Deficiencies.

Complement component 1 Q subcomponent-binding protein (C1QBP; also known as p32) is a multi-compartmental protein whose precise function remains unknown. It is an evolutionary conserved multifunctional protein localized primarily in the mitochondrial matrix and has roles in inflammation and infection processes, mitochondrial ribosome biogenesis, and regulation of apoptosis and nuclear transcription. It has an N-terminal mitochondrial targeting peptide that is proteolytically processed after import into the mitochondrial matrix, where it forms a homotrimeric complex organized in a doughnut-shaped structure. Although C1QBP has been reported to exert pleiotropic effects on many cellular processes, we report here four individuals from unrelated families where biallelic mutations in C1QBP cause a defect in mitochondrial energy metabolism. Infants presented with cardiomyopathy accompanied by multisystemic involvement (liver, kidney, and brain), and children and adults presented with myopathy and progressive external ophthalmoplegia. Multiple mitochondrial respiratory-chain defects, associated with the accumulation of multiple deletions of mitochondrial DNA in the later-onset myopathic cases, were identified in all affected individuals. Steady-state C1QBP levels were decreased in all individuals' samples, leading to combined respiratory-chain enzyme deficiency of complexes I, III, and IV. C1qbp-/- mouse embryonic fibroblasts (MEFs) resembled the human disease phenotype by showing multiple defects in oxidative phosphorylation (OXPHOS). Complementation with wild-type, but not mutagenized, C1qbp restored OXPHOS protein levels and mitochondrial enzyme activities in C1qbp-/- MEFs. C1QBP deficiency represents an important mitochondrial disorder associated with a clinical spectrum ranging from infantile lactic acidosis to childhood (cardio)myopathy and late-onset progressive external ophthalmoplegia.

Identification of a novel heterozygous guanosine monophosphate reductase (GMPR) variant in a patient with a late-onset disorder of mitochondrial DNA maintenance.

Autosomal dominant progressive external ophthalmoplegia (adPEO) is a late-onset, Mendelian mitochondrial disorder characterised by paresis of the extraocular muscles, ptosis, and skeletal-muscle restricted multiple mitochondrial DNA (mtDNA) deletions. Although dominantly inherited, pathogenic variants in POLG, TWNK and RRM2B are among the most common genetic defects of adPEO, identification of novel candidate genes and the underlying pathomechanisms remains challenging. We report the clinical, genetic and molecular investigations of a patient who presented in the seventh decade of life with PEO. Oxidative histochemistry revealed cytochrome c oxidase-deficient fibres and occasional ragged red fibres showing subsarcolemmal mitochondrial accumulation in skeletal muscle, while molecular studies identified the presence of multiple mtDNA deletions. Negative candidate screening of known nuclear genes associated with PEO prompted diagnostic exome sequencing, leading to the prioritisation of a novel heterozygous c.547G>C variant in GMPR (NM_006877.3) encoding guanosine monophosphate reductase, a cytosolic enzyme required for maintaining the cellular balance of adenine and guanine nucleotides. We show that the novel c.547G>C variant causes aberrant splicing, decreased GMPR protein levels in patient skeletal muscle, proliferating and quiescent cells, and is associated with subtle changes in nucleotide homeostasis protein levels and evidence of disturbed mtDNA maintenance in skeletal muscle. Despite confirmation of GMPR deficiency, demonstrating marked defects of mtDNA replication or nucleotide homeostasis in patient cells proved challenging. Our study proposes that GMPR is the 19th locus for PEO and highlights the complexities of uncovering disease mechanisms in late-onset PEO phenotypes.

Preparation of Highly Swelling/Antibacterial Cross-Linked N-Maleoyl-Functional Chitosan/Polyethylene Oxide Nanofiber Meshes for Controlled Antibiotic Release.

Due to the cell affinity of chitosan (CS) and the hydrophilicity of polyethylene oxide (PEO), CS/PEO composited nanofiber meshes (NFMs) have been extensively used as wound healing dressings for skin tissue regeneration. Nonetheless, numerous innate drawbacks of the NFM system such as the use of toxic spinning solvents and cross-linkers, moderate water regain capacity, and lack of triggered release function significantly hampered their biomedical applications. In order to enhance their performances in promoting cell growth and preventing bacterial infection, highly swelling cross-linked N-maleoyl-functional chitosan (MCS)/PEO NFMs have been developed as the next-generation CS/PEO NFM system through an acid-free electrospinning process and a UV-irradiated cross-linked treatment without the use of aldehyde-containing cross-linkers. With the simultaneous introduction of ethylene oxide chains and disulfide bonds in the cross-linkages, this new NFM system displays enhanced swelling capability, antibacterial ability, triggered antibiotic release, and high biocompatibility. These biomedical merits enable the new NFM systems to be utilized as tissue scaffolds, especially for functional wound healing dressings.