The effectiveness of the total-maxillary-arch-distalization approach in treating class II division 1 malocclusion: A systematic review.

OBJECTIVE: The objective of this review is to assess the effect of total maxillary arch distalization (TMAD) treatment on the dental, skeletal, soft tissues, and airways during non-extraction camouflage treatment of class II division 1 patients. METHODS: We performed a systematic review of the published data in four electronic databases up to April 2023. We considered studies for inclusion if they were examining the effects of TMAD during treatment of class II division 1 malocclusion in the permanent dentition. Study selection, data extraction, risk of bias assessment, and assessment of the strength of the evidence using the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) tool were performed in duplicate. RESULTS: Out of the 27 articles that met the initial eligibility criteria, 19 studies were finally selected. Fair to relatively good quality evidence was identified after the risk of bias assessment of the included studies. Out of the 19 selected studies, 5 studies used inter-radicular TADs, 10 studies used modified C- palatal plate (MCPP), 3 studies used infra zygomatic crest (IZC) TADs, 1 study compared buccal TADs versus MCPP, and 1 study compared between cervical headgear and MCPP. The maximum amount of maxillary arch distalization using buccal TADs, MCPP, IZC TADs, and headgear was 4.2mm, 5.4mm, 5mm, and 2.5mm respectively. Different results regarding the amount of dental, skeletal, and soft tissue changes were observed. CONCLUSIONS: The current low to very low certainty level of evidence suggests that TMAD is effective in camouflaging class II division 1 malocclusion. Future well-conducted and clearly reported randomized controlled trials that include a control group are needed to make robust recommendations regarding the effect of TMAD with different appliances on dental, skeletal, and soft tissue structures. CLINICAL RELEVANCE: TMAD should be given priority with caution in class II patients who refuse the extraction of premolars. TMAD may be considered an adjunctive approach to solve cases associated with high anchorage need or anchorage loss.

Effectiveness of oral motor appliances on oral motor function and speech in children: a systematic review.

BACKGROUND: Different oral motor appliances have been used in connection with speech therapy to improve oral motor function and speech development, but no consensus has been reached on the effectiveness of the appliances. The objective was to systematically review the effectiveness of oral motor appliances on oral motor function and speech in children with speech sound disorders (SSDs) or oral motor dysfunctions. METHODS: A systematic search was conducted up to February 2023 in the PubMed, Scopus, and Cochrane databases. Inclusion criteria were prospective randomized or case-control clinical trials investigating the effect of intraoral appliances on orofacial function and/or speech. The risk of bias was evaluated by the Cochrane Collaboration's Robins-I tool. RESULTS: Nine publications of three individual studies met the inclusion and search criteria. Six of the publications were conducted in children with Down Syndrome (DS) and three publications were conducted in children with Cerebral Palsy (CP). No meta-analysis was made due to the limitations of the publications. Selected studies reported some beneficial effects of intraoral appliances on oral motor function in children with DS and CP, although the evidence is low. Due to the study design in selected studies and confounding factors, the overall risk of bias was categorized as moderate or high. DISCUSSION: Intraoral appliances may improve oral motor function in children with DS and CP. Due to lack of studies this review limited to children with DS and CP. The initial question concerning SSDs was not answered. Well-designed RCTs with larger sample sizes are needed, especially among non-syndromic children with SSDs. The level of evidence was considered very low.

Evaluation of modified C-palatal plates on speech articulation using acoustic analysis.

INTRODUCTION: The purpose of this study was to assess speech perturbation and adaptation for patients wearing modified C-palatal plates (MCPPs) over time. METHODS: The sample consisted of 40 patients, 20 wearing MCPPs as the experimental group (age: 20.7 ± 5.8 years) and 20 patients wearing a transpalatal arch (TPA) as the control group (age: 21.5 ± 6.4 years). The sounds /t/, /d/, /s/, /n/, /r/, /tʃ/. and /j/ were recorded for each patient at six time points: immediately before (T0) and after (T1) appliance placement; then 1, 2, 3 and 4 weeks after placement (T2-T5). Acoustic analysis of pitch and voice onset time (VOT) was performed by Praat software. Repeated measures analysis of variance (RM-ANOVA) was used to assess changes in the pitch and VOT over time and the difference between the appliances. RESULTS: With the MCPP appliance, /n/, /r/, /tʃ/ and /j/ decreased in VOT starting in the first week while /t/ and /s/ almost returned to pre-treatment levels after 2 weeks. VOT for the /d/ sound did not change between T0 and T3, but it decreased after 3 weeks. There were no significant differences in pitch and VOT between the two groups at any time point. CONCLUSIONS: Wearing an MCPP device caused patients to initially distort the articulation of several sounds, but the distortion dissipated within 1 to 2 weeks. It is recommended that patients and/or their parents be advised during pre-treatment counselling of the possibility of temporary speech changes with MCPP placement.

Disruptive Therapy Using a Nonsurgical Orthodontic Airway Plate for the Management of Neonatal Robin Sequence: 1-Year Follow-up.

We recently published the 3-month follow-up of 2 neonates with Robin sequence whose mandibular hypoplasia and restricted airway were successfully treated with an orthodontic airway plate (OAP) without surgical intervention. Both infants were successfully weaned off the OAP after several months of continuous use. We present the course of OAP treatment in these patients with a focus on breathing, feeding, and facial growth during their first year of life. Both infants demonstrated stable mandibular projection, resolution of obstructive sleep apnea, and normal development.

Effect of the denture adhesive for dry mouth on the retentive force of the experimental palatal plates: a pilot controlled clinical trial.

BACKGROUND: A denture adhesive for dry mouth with good cleaning properties has recently been developed. While previous studies on models have shown the effectiveness of denture adhesives in terms of retention and cleanability, no reports have evaluated their effectiveness in the oral cavity. The aim of this study was to compare and investigate the retention and usability of an experimental palatal plate in the dentulous jaw using a denture adhesive for dry mouth, a conventional cream-type denture adhesive, an oral moisturizer, and a denture moisturizer. METHODS: Ten healthy dentulous participants (mean age 27.2 ± 1.6 years) were included in the study. Palatal plates were fabricated. Four test samples were used: denture adhesive for dry mouth, conventional denture adhesive (cream type), oral moisturizer, and denture moisturizer. The sample was applied to the inner surface of the palatal plates, and the retentive force of the palatal plate was measured every 10 min for 30 min. After the measurements, the study participants were asked to rinse the palatal plate with water and subjectively evaluate the samples used. RESULTS: The conventional denture adhesive (cream type) showed increased retentive force over time, with the maximum retentive force obtained after 10 min of application. However, its washability was rated second lowest. The denture adhesive for dry mouth showed the highest retentive force immediately after application. Its washability was also good. CONCLUSIONS: The results suggest that the denture adhesive for dry mouth has reasonable retentive force in the oral cavity and cleaning properties compared to the conventional cream-type denture adhesive.

Comparison of treatment effects from total arch distalization using modified C-palatal plates versus maxillary premolar extraction in Class II patients with severe overjet.

INTRODUCTION: This study aimed to compare the skeletodental and soft tissue changes with total arch distalization using a modified C-palatal plate (MCPP) and maxillary first premolar extraction treatment in Class II malocclusion patients with severe overjet. SETTING AND SAMPLE POPULATION: The sample consisted of 46 adult patients who had Class II Division 1 malocclusion with severe overjet; 25 of them received non-extraction treatment with MCPPs (age, 22.5 ± 7.2 years), and 21 received maxillary first premolar extraction treatment (age 23.4 ± 6.5 years). METHOD: A total of 26 variables were measured on pre- and post-treatment lateral cephalograms. To evaluate the differences between pretreatment and post-treatment in each group, t tests and Wilcoxon rank-sum tests were used. To compare the amount of change between the two groups, MANOVA test was used. RESULTS: The overjet was significantly reduced in the MCPP and extraction groups by 4.8 mm and 5.4 mm, respectively. However, the two groups had no significant difference in the sagittal, vertical and angular changes of the maxillary incisors. In addition, regarding soft tissue changes, the MCPP and extraction groups showed an increased nasolabial angle of 7.5° and 9.4°, decreased upper lip to the true vertical line of 1.8 mm and 2.2 mm, respectively (P < .001). CONCLUSIONS: There was no significant difference in the skeletal changes between the MCPP and extraction groups, and the reduction in overjet was similar in the groups. These results suggest that MCPP might be a viable treatment option for total arch distalization in Class II malocclusion patients with severe overjet.

Neurocognitive development in isolated Robin sequence treated with the Tuebingen palatal plate.

OBJECTIVES: We aimed to determine the neurocognitive development of cleft palate patients with and without Robin sequence (RS). MATERIALS AND METHODS: Children with isolated RS with cleft palate and children with cleft palate only (CPO) were contacted at the age of 5-6 years. All RS children had undergone initial polygraphic sleep study (PG) with a mixed-obstructive apnea index (MOAI) of ≥ 3/h and were consequently treated with the Tuebingen palatal plate. A standardized clinical examination as well as a neuropediatric and neuropsychological examination included the Wechsler Pre-school and Primary Scale of Intelligence (WPPSI-III), Kaufman Assessment Battery for Children (K-ABC), and an assessment of developmental milestones. RESULTS: In total, 44 children (22RS, 22CPO) were included. RS children were younger at study (70.5 ± 7.3 and 75.2 ± 7.5 months; P = .035). Both groups achieved the evaluated milestones within the normed time frame. WPPSI-III and K-ABC results showed no group differences. Mean values for Verbal IQ (101.8 ± 11.1 vs. 97.1 ± 15.7), Performance IQ (102.9 ± 12.1 vs. 99.6 ± 14.5), Processing Speed Quotient (98.9 ± 15.6 vs. 94.5 ± 15.7), Full-Scale IQ (103.2 ± 12.1 vs. 98.4 ± 15.3), and Sequential Processing Scale (102.1 ± 13.1 vs. 94.2 ± 17.3) were within the reference range (IQ 85-115) for RS and CPO children, respectively, indicating average performance of both groups. CONCLUSION: No neurocognitive, physical, or mental impairments were detected suggesting that RS children having upper airway obstruction (UAO) treated early and effectively may use their potential for an age-appropriate neurocognitive development. CLINICAL RELEVANCE: Tuebingen palatal plate treatment successfully releases UAO. Thus, isolated RS does not necessarily result in developmental delay or an impaired neurocognitive outcome. TRIAL REGISTRATION: Deutsches Register Klinischer Studien, DRKS00006831, https://www.drks.de/drks_web/.

Nonsurgical Orthodontic Airway Plate Treatment for Newborns With Robin Sequence.

Despite promising outcomes for >50 years, nonsurgical orthodontic airway plates (OAP) are only infrequently offered for babies with Robin sequence in a few parts of the world. This article demonstrates possibility of providing functional improvement using an OAP to help these babies overcome their functional and structural difficulties on their own. Two consecutively treated cases are presented exemplifying that OAP treatment that had originated from Europe is reproducible and effective in an institution in the United States.

Effect of traction direction and pressure load on the palatal plate on retentive force.

BACKGROUND: Recently, a denture adhesive that is easy to clean and contain moisturizing ingredients have been developed for patients with dry mouth. Although the retentive force produced by conventional denture adhesives and oral moisturizers have been compared on models, no study has reported their comparison in the oral cavity. In this study, we aimed to clarify the effects of different directions of traction and loads at the time of pressure contact on the retentive force on a palatal plate made from a dentulous jaw model. METHODS: A palatal plate was fabricated with thermoplastic resin on a dentulous jaw model, and a loop-shaped traction device was attached to the centre of the palate. The test samples were a cream-type denture adhesive, a denture adhesive for dry mouth, an oral moisturizer, and a denture moisturizer. The specimens were applied to the inner surface of the plate, which was then mounted under vertical pressure. Then, the retentive force was measured, using a digital force gauge, while the plate was pulled in different directions and with different loads. RESULTS: No significant difference in retentive force was observed in any of the test samples when the direction of traction was between 45° and 60°. The retentive force of the denture adhesive for dry mouth was significantly higher with a direction of traction of 90° than that of 45° or 60°. The retentive force when oral moisturizer was used was significantly higher in the 90° traction direction than in the 45° direction. There was no significant difference between a force of 4.0 kgf or 5.5 kgf when using a denture adhesive for dry mouth. Comparing the four load size conditions, the larger the load, the higher was the retentive force. Similar results were obtained for the cream-type denture adhesive and denture moisturizer. Significantly higher retentive force was observed for larger loads when oral moisturizer was used. CONCLUSIONS: The results suggest that the direction of traction and the pressure load affect the retentive force on a palatal plate.

Factors associated with the maxillary third molar position after total arch distalization using a modified C-palatal plate in adolescents.

INTRODUCTION: The purpose of this study was to evaluate the long-term position of erupted third molars after maxillary total arch distalization using modified C-palatal plates (MCPPs) in adolescents and to identify factors associated with these positions. SETTING AND SAMPLE POPULATION: Sixty-two third molars (male: 20, female: 42) in Class II patients treated with MCPPs and thirty-nine teeth for the Control group (male: 22, female: 17). MATERIALS AND METHODS: Samples were analyzed using panoramic radiographs taken initially (T0), after treatment (T1) and after >3 years retention (T2). Third molars were classified as downward (Group A, N = 31; males: 12, females: 19) and upward (Group B, N = 31; males: 8, females: 23) based on their vertical position after treatment. Analysis of variance and multiple logistic regression analysis were performed. RESULTS: The vertical position of the third molars of Group A, Group B, and the Control showed a 2.2, 3.5 and 2.7 mm downward movement at T2. However, there was no difference in the amount of third molar eruption among the groups. Regarding factors affecting the vertical distance of the third molar, Age, C8-OP, ∠8-OP and D7-T at the initial affected vertical position of the third molars after molar distalization (P < .05). CONCLUSIONS: Group A and B showed no difference in the third molar eruption during retention after total arch distalization. This study suggests that it might be unnecessary to extract the developing third molar before molar distalization in Class II adolescents.

An innovative method for manufacturing the Tuebingen palatal plate for infants with Robin sequence.

BACKGROUND: Robin sequence (RS) is characterized by mandibular micro- and retrognathia, glossoptosis, upper airway obstruction and optionally a cleft palate. With an incidence of 1:8000, it belongs to the so-called rare diseases; 30-50% of patients have RS as part of a syndrome. A comparatively well-studied treatment option is the Tuebingen Palatal Plate (TPP), which has proven effective in both, isolated and syndromic RS, but often requires multiple endoscopies for perfect fit and effectiveness. We report on a new method for fitting the TPP with only one session of nasopharyngeal endoscopy resulting in the plate being finished in one day. METHODS AND RESULTS: First, a prototype is produced, consisting of a traditional acrylic palatal part and a velar extension made of thermoplastic resin, usually measuring 10x40mm. Using polymerization, a scale is added to the posterior part of the extension to help with determining its optimal length during endoscopic evaluation. The extension is pre-bent in the dental laboratory to achieve an approximate shape. During endoscopy, the prototype can be adjusted to the infant's anatomy: first, the angulation is customized by controlled heating, bending and cooling of the thermoplastic spur. Second, the length of the spur is adapted by grinding its tip. Then the prototype is returned to the dental laboratory for completion; the final plate can be delivered to the patient on the same day. It acts by shifting the tongue into a more anterior position, thereby opening the airway and releasing upper airway obstruction, as well as by acting as a functional orthodontic appliance that stimulates mandibular growth through exerting pressure on the base of the tongue. CONCLUSIONS: With the thermoplastic spur presented here, a TPP can be produced within one day, requiring only one endoscopy. This approach may facilitate fabricating the TPP.

Technical note on introducing a digital workflow for newborns with craniofacial anomalies based on intraoral scans - part II: 3D printed Tübingen palatal plate prototype for newborns with Robin sequence.

BACKGROUND: Orthodontic treatment of newborns and infants with Robin-Sequence using the Tübingen Palatal Plate (TPP) is a complex procedure that could benefit from simplification through digitalization. The design of the velar extension (spur) and the palatal base determines the success of the treatment. Therefore, a prototype must be produced and inserted under endoscopic supervision in order to determine the appropriate shape, length and position of the spur. This technical note demonstrates a fully digital workflow for the design and manufacturing of a functional TPP prototype, based on an intraoral scan. This prototype can be altered and individualized digitally for each patient. After the shape and position of the spur have been optimized, the prototype is duplicated using a silicone mold. Then the definitive TPP is manufactured and inserted. We aim to present a workflow which facilitates the fitting procedure and does not require a conventional impression or a physical model to create the appliance. METHODS: As described in part I of this series, the intraoral scan is performed using the 3Shape TRIOS3 scanner and its corresponding acquisition software. The virtual model is rendered in the 3Shape ortho appliance designer and the base of the palatal plate is designed in the 3Shape dental designer. The palatal plate and the virtual model are then imported into Autodesk Meshmixer and a standardized spur is positioned and merged with the base. The TPP is exported in Standard Tessellation Language (STL) format and manufactured on a W2P Solflex 170 DLP printer using VOCO VPrint Splint material (MDR Class IIa). RESULTS: Based on an intraoral scan, the TPP prototype could be successfully manufactured and proved suitable for the patients' treatment. CONCLUSION: The new digital workflow for the design of the TPP can been successfully implemented into daily clinical routine in our facility. Patients could be alleviated from having to undergo conventional impression procedures and fitting of the TPP could be facilitated by producing multiple functional prototypes for endoscopic evaluation. Through rapid prototyping, the expenditure of the fitting process was reduced, which makes the TPP therapy more efficient and accessible to a wider range of clinicians.

Comparison of Treatment Effects with Modified C-Palatal Plates vs Greenfield Molar Distalizer Appliances in Adolescents.

Objectives: The aim of study was to evaluate skeletodental and soft tissue treatment effects and the amount of maxillary molar distalization with modified C-palatal plates vs. Greenfield molar distalizer appliances in adolescents. Study design: The samples consisted of pre- and posttreatment lateral cephalograms collected from 39 patients with Class II malocclusion. The MCPP group was comprised of 21 patients (mean age: 11.7 ± 1.3 years) treated with MCPP appliances while the GMD group included 18 patients (mean age: 11.2 ± 0.9 years) treated with GMD. Fixed orthodontic treatment started with the distalization process in both groups. From each cephalograpm, twenty-nine variables were measured for analysis and then the two groups were compared. Descriptive statistics, a paired t-test, and multivariate analysis of variance were performed to compare the treatment effects within and between the groups. Results: There was significant treatmentrelated change in the sagittal position of the maxilla and the mandible within each group. However, there were no statistically significant inter-group differences. The mean maxillary first molar distalization was 3.96 mm in the MCPP group vs. 2.85 mm in the GMD group. Both groups showed minimal distal tipping, but the maxillary incisors were significantly extruded by 3.04 ± 0.89 mm (P < .001) in GMD group. There was no significant difference in treatment duration between the groups. Conclusions: The maxillary first molars of both the MCPP and GMD groups were effectively distalized and there were significant skeletal changes in the maxilla. However, the maxillary incisors were significantly extruded in the GMD group.

Outcome of orthodontic palatal plate therapy for orofacial dysfunction in children with Down syndrome: A systematic review.

To evaluate the effects of orthodontic palatal plate therapy (OPPT) in the treatment of orofacial dysfunction in children with Down syndrome (DS). Indexed databases were searched. Clinical trials in DS allocated to test (treatment with palatal plates) versus control group (without palatal plates/special physiotherapy for orofacial stimulation) with follow-up of any time duration and assessing mouth closure, tongue position, active and inactive muscle function as outcomes. Study designs, subject demographics, frequency and duration of palatal plate therapy, method for assessment, follow-up period and outcomes were reported according to the PRISMA guidelines. Eight clinical studies were included. The risk of bias was considered high in three studies and moderate in 5 studies. The number of children with DS ranged between 9 and 42. The mean age of children with DS at the start of the study ranged between 2 months and 12 years. The duration of palatal plate therapy ranged between 4 months and 48 months. The follow-up period in all studies ranged from 12 to 58 months. All studies reported OPPT to be effective in improving orofacial disorders in children with DS. Most of the included studies suggest that palatal plate therapy in combination with physiotherapy/orofacial regulation therapy according to Castillo Morales/speech and language intervention seems to be effective in improving orofacial disorders in children with DS. However, the risk of bias of the included studies was high to moderate. Longitudinal trials with standardized evaluation methods, age of children at treatment initiation, treatment duration and standard orofacial outcomes are recommended.

Adaptive change in chewing-related brain activity while wearing a palatal plate: an functional magnetic resonance imaging study.

Prosthodontic treatment success depends on patients' ability to adapt to an altered oral environment containing removable prostheses. We investigated adaptive chewing-related brain activity changes in response to a new oral environment. Twenty-eight fully dentate subjects (mean age: 28·6 years) wore experimental denture-base palatal plates (3 mm thick), for 7 days. We measured food mixing ability and cycle time, and assessed brain activity by functional magnetic resonance imaging during chewing at pre-insertion (Day 0), and immediately (Day 1), 3 days (Day 3) and 7 days (Day 7) after insertion. Food mixing ability significantly decreased and cycle time increased on Day 1 as compared to Day 0 (P < 0·001) and tended to recover to Day 0 level by Day 7. Brain activation in the right face primary sensorimotor cortex and putamen significantly decreased on Day 1 as compared to Day 0 (P < 0·001) and recovered to Day 0 level by Day 7. Brain activation in the left face primary sensorimotor cortex, putamen, anterior cingulate gyrus (ACG) and right posterior medial frontal cortex (pMFC) significantly decreased on Day 1 as compared to Day 0 (P < 0·001) and did not recover by Day 7. Thus, oral environment changes involving palate covering affected chewing and induced adaptive brain activity changes in the face primary sensorimotor cortex and putamen, possibly associated with motor learning. As ACG and pMFC activity remained unrecovered by 7 days after plate insertion, automatisation of chewing while wearing a palatal plate may require longer adaptation periods.

Evaluation of Maxillary Protraction Using a Mini Screw-Retained Palatal C-Shaped Plate and Face Mask.

Objective: To evaluate a newly designed minimally invasive palatal-plate face mask combination for the management of developing Class III malocclusion due to maxillary deficiency. Methods: A sample of 16 Class III patients due to maxillary deficiency in the early mixed dentition (8 boys and 8 girls) aged between 7 and 9 years participated in this study and were treated with a combination of palatal plate face masks. Extra-oral elastics were attached between the intra-oral and extra-oral appliances; the elastics were set at 30° to the occlusal plane. The force magnitude was 250-300 g per quadrant. Cephalometric radiographs were taken before and immediately after maxillary protraction. In addition, skeletal measurements were measured, tabulated, and statistically analyzed. The pre- and post-protraction measurements were compared using the Student's t-test, and the significance level was set at a p-value <0.05. Results: A statistically significant increase in SNA angle and maxillary length was observed by 3.13±1.52 degrees and 2.60±0.75 mm (p<0.05), respectively, indicating forward maxillary growth. The skeletal and soft tissue patterns were also improved, as evidenced by the statistically significant increase in the ANB angle, Wits appraisal, and H angle by 4.50±1.28 degrees, 5.30±1.86 mm, and 5.02±3.24 degrees (p<0.05), respectively. A favorable clockwise mandibular rotation was observed as evidenced by the increase in the SN/MP angle and the decrease in the SNB angle by 1.46±1.96 degrees and -1.38±1.86 degrees (p<0.05), respectively. Conclusion: The palatal-plate facemask combination is an effective treatment alternative for Class III malocclusion due to maxillary deficiency with minimal pain and discomfort.

Skeletal and dentoalveolar changes after total maxillary arch distalization using the casted palatal plate vs. buccal miniscrews: A randomized clinical trial.

OBJECTIVES: To evaluate treatment changes after total maxillary arch distalization using the casted palatal plate compared with buccal miniscrews. MATERIAL AND METHODS: This was a randomized, parallel, two-arm, single center trial. Participants were young adults with class II dental relationships and normal or horizontal growth patterns. The patients were treated with total distalization of the maxillary arch and were randomly allocated, according to the anchorage devices, between the plate group and the minivis group. The primary outcomes were sagittal, vertical and angular changes of molars and incisors, while the secondary outcomes were skeletal and soft tissue changes. Outcomes were evaluated on lateral cephalograms and blinding of outcome assessment was implemented. A multivariate analysis of Variance (MANOVA) tests were used and Bonferroni correction for multiple comparisons with P<0.001. RESULTS: Forty patients (33 females and 7 males; mean age 20±3.1 years) where enrolled. A significant distalization of U6 was observed in both groups (4.33mm in the plate group and 1.88mm in the miniscrews group). It was combined with significant intrusion and non-significant distal tipping of the U6 in the plate group (1.85mm and 3.10°, respectively), while intrusion and distal tipping were non-significant in the miniscrew group (0.8mm and 2°, respectively). Both groups showed significant retraction and palatal inclination without vertical changes of U1. Only the plate group produced significant reduction of ANB and Wits. Upper and lower lips were retracted and the nasolabial angle increased significantly in both groups. There was no significant main effect of the appliance type on the comparison of treatment effects between the two groups (P=0.623). However, univariate comparisons showed that the plaque group showed greater distalization of the U6 (P<0.001). CONCLUSIONS: Both the casted palatal plate and buccal miniscrews can be viable devices for total distalization of the maxillary arch in the treatment of class II patients. The casted plate may be considered when more extensive distalization is required.

Automation of Measurements for Personalized Medical Appliances by Means of CAD Software-Application in Robin Sequence Orthodontic Appliances.

Measuring the dimensions of personalized devices can provide relevant information for the production of future such devices used in various medical specialties. Difficulties with standardizing such measurement and obtaining high accuracy, alongside cost-intensive measuring methodologies, has dampened interest in this practice. This study presents a methodology for automatized measurements of personalized medical appliances of variable shape, in this case an orthodontic appliance known as Tübingen Palatal Plate (TPP). Parameters such as length, width and angle could help to standardize and improve its future use. A semi-automatic and custom-made program, based on Rhinoceros 7 and Grasshopper, was developed to measure the device (via an extraoral scanner digital file). The program has a user interface that allows the import of the desired part, where the user is able to select the necessary landmarks. From there, the program is able to process the digital file, calculate the necessary dimensions automatically and directly export all measurements into a document for further processing. In this way, a solution for reducing the time for measuring multiple dimensions and parts while reducing human error can be achieved.

Pierre Robin Sequence and 3D Printed Personalized Composite Appliances in Interdisciplinary Approach.

This paper introduces a complex novel concept and methodology for the creation of personalized biomedical appliances 3D-printed from certified biocompatible photopolymer resin Dental LT Clear (V2). The explained workflow includes intraoral and CT scanning, patient virtualization, digital appliance design, additive manufacturing, and clinical application with evaluation of the appliance intended for patients with cranio-facial syndromes. The presented concept defines virtual 3D fusion of intraoral optical scan and segmented CT as sufficient and accurate data defining the 3D surface of the face, intraoral and airway morphology necessary for the 3D design of complex personalized intraoral and extraoral parts of the orthopedic appliance. A central aspect of the concept is a feasible utilization of composite resin for biomedical prototyping of the sequence of marginally different appliances necessary to keep the pace with the patient rapid growth. Affordability, noninvasiveness, and practicality of the appliance update process shall be highlighted. The methodology is demonstrated on a particular case of two-year-old infant with Pierre Robin sequence. Materialization by additive manufacturing of this photopolymer provides a highly durable and resistant-to-fracture two-part appliance similar to a Tübingen palatal plate, for example. The paper concludes with the viability of the described method and material upon interdisciplinary clinical evaluation of experts from departments of orthodontics and cleft anomalies, pediatric pneumology and phthisiology, and pediatric otorhinolaryngology.

Efficiency of maxillary total arch distalization using temporary anchorage devices (TADs) for treatment of Class II-malocclusions: A systematic review and meta-analysis.

OBJECTIVES: To evaluate the treatment effects and post-treatment stability of the maxillary total arch distalization using TADs during the non-extraction treatment of class II malocclusions. MATERIALS AND METHODS: Study involved an electronic search followed by hand searching for randomized and non-randomized clinical studies about maxillary total arch distalization using TADs. After data extraction and risk of bias assessment, meta-analysis was performed for dental, skeletal and soft tissue changes using the Generic-inverse variance approach by use of the mean difference and random-effect model. RESULTS: In total, 1788 articles were identified, 88 full texts were screened and 22 studies were found eligible; 17 of them were included in the quantitative analysis. The means of distalization/distal tipping of the maxillary first molar were 4mm/3.17° in adults, 3.95mm/1.61° in adolescents after treatment with the Modified C-Palatal plate (MCPP), while they were 2.44mm/2.91° with the inter-radicular mini-screws. Both MCPP's treatment in adults and inter-radicular mini-screws resulted in significant intrusion of U6 (1.64 and 0.75mm, respectively), while insignificant extrusion of U6 was resulted in adolescents treated by MCPP. MCPP appliances resulted in palatal inclination/extrusion of maxillary incisors U1 (6.77°/2mm in adults, 7.46°/3.14mm in adolescents). In contrast, inter-radicular mini-screws resulted in less palatal less amount of palatal inclination/insignificant intrusion of U1 (2.42°/0.14mm). MCPP treatment also resulted in significant changes in the skeletal measurements (SNA, ANB, occlusal and mandibular planes). Insignificant differences were found between subgroups in the retraction amount of maxillary incisors, as well as the upper and lower lips. In the follow-up of adolescents treated with MCPP, a significant amount of mesial movement, mesial tipping, and extrusion (2.94mm, 2.84°, and 3.94mm, respectively) was found. However, skeletal and occlusal corrections of the Class II relationship were maintained. CONCLUSIONS: Maxillary total arch distalization using TADs can be an effective and stable treatment procedure. However, RCTs or prospective cohort studies are highly recommended to establish a clinical evidence regarding their efficiency.