Improving sludge dewaterability via Fe2+ chelated citrate activated peroxydisulfate oxidation.

Citrate (Ct) was chosen as a typical chelator used in the Fe2+-peroxydisulfate (PDS) process to improve sludge dewaterability. The PDS-Fe2+-Ct process exhibited better performance in sludge dewatering than PDS-Fe2+. Specifically, with a PDS dosage of 1.2 mmol/g VS, the molar ratio of PDS/Fe2+ and Ct/Fe2+ were 4:5 and 1:4, respectively, the capillary suction time decreased from 155.8 to 24.8sec, and the sludge cake water content decreased from 82.62% to 64.11% (-0.06MPa). The oxidation led to a reduced negative charge and a decrease in particle size. The enhanced sludge dewaterability and changes of sludge properties were attributed to the decomposition of extracellular polymeric substances, and it was explored by protein, polysaccharide, 3D-EEMs, and FT-IR. Additionally, the quenching experiments of radical species demonstrated that SO4-• played a more important role than •OH, and its productivity was improved with the addition of Ct. Moreover, the reasons for the improved productivity of radicals with the addition of Ct were discussed. The results of this study could serve as a basis for improving sludge dewatering using the PDS-Fe2+-Ct process and suggest that the addition of Ct may improve the productivity of SO4-• in the activation of PDS via Fe2+.

Effect of peroxydisulfate oxidation catalyzed with ordered mesoporous carbons on controlling ultrafiltration membrane fouling by algal organic matter.

As typical ordered mesoporous carbons (OMCs) materials, CMK-3 and CMK-8 were proposed for catalyzing peroxydisulfate (PDS), and the OMCs/PDS process was combined with membrane filtration to remove algal extracellular organic matter and mitigate membrane fouling. The CMK-3/PDS process achieved substantial reduction of dissolved organic carbon and UV254, followed by CMK-8/PDS. The degradation behavior of fluorescent organics demonstrated the superior performance of OMCs/PDS, while the decomposition of high molecular weight (MW) compounds and generation of lower MW organics were observed. Generally, CMK-3 possessed higher catalytic activity on PDS compared with CMK-8 and powdered activated carbon. The CMK-3/PDS process distinctly decreased the fouling resistances for polyether sulfone and polyvinylidene fluoride membranes, with the reversible resistance reduced by 59.5-83.2% and irreversible resistance declined by 71.7-73.0%. In the meanwhile, CMK-3/PDS prolonged the volumes to the transition period, and postponed the cake layer's generation. The characterization of the membrane morphologies and chemical compositions also showed effective alleviation of fouling. The generated SO4-, OH, O2- and 1O2 as major active oxidation species provided radical as well as non-radical reaction ways for pollutants removal. Overall, our study provides some new ideas for membrane-based combined water purification processes.

Enhanced peroxydisulfate oxidation via Cu(III) species with a Cu-MOF-derived Cu nanoparticle and 3D graphene network.

The contribution of Cu(III) produced during heterogeneous peroxydisulfate (PDS) activation to pollutant removal is largely unknown. Herein, a composite catalyst is prepared with Cu-based metal organic framework (Cu-MOF) derived Cu nanoparticles decorated in a three-dimensional reduced graphene oxide (3D RGO) network. The 3D RGO network overcomes the aggregation of nanosized zero-valent copper and reduces the copper consumption during the PDS activation reaction. The Cu/RGO catalyst exhibits high catalytic activity for 2,4-dichlorophenol (2,4-DCP) degradation in a wide pH range of 3-9, with a low Cu dosage that is only 0.075 times that of previous reports with zero-valent copper. Moreover, a high mineralization ratio (69.2 %) of 2,4-DCP is achieved within 30 min, and the Cu/RGO catalyst shows high reactivity toward aromatic compounds with hydroxyl and chlorinated groups. Unlike normal sulfate radical-based advanced oxidation, alcohols show negligible impacts on the reaction, suggesting that Cu(III), rather than SO4- and OH, dominates the degradation process. We believe that PDS activation by 3D Cu/RGO, with Cu(III) as the main active species, provides new insights in selective organic pollutant removal in wastewater treatment.