Synergistic Catalytic Removal of NOx and n-Butylamine via Spatially Separated Cooperative Sites.

Synergistic control of nitrogen oxides (NOx) and nitrogen-containing volatile organic compounds (NVOCs) from industrial furnaces is necessary. Generally, the elimination of n-butylamine (n-B), a typical pollutant of NVOCs, requires a catalyst with sufficient redox ability. This process induces the production of nitrogen-containing byproducts (NO, NO2, N2O), leading to lower N2 selectivity of NH3 selective catalytic reduction of NOx (NH3-SCR). Here, synergistic catalytic removal of NOx and n-B via spatially separated cooperative sites was originally demonstrated. Specifically, titania nanotubes supported CuOx-CeO2 (CuCe-TiO2 NTs) catalysts with spatially separated cooperative sites were creatively developed, which showed a broader active temperature window from 180 to 340 °C, with over 90% NOx conversion, 85% n-B conversion, and 90% N2 selectivity. A synergistic effect of the Cu and Ce sites was found. The catalytic oxidation of n-B mainly occurred at the Cu sites inside the tube, which ensured the regular occurrence of the NH3-SCR reaction on the outer Ce sites under the matching temperature window. In addition, the n-B oxidation would produce abundant intermediate NH2*, which could act as an extra reductant to promote NH3-SCR. Meanwhile, NH3-SCR could simultaneously remove the possible NOx byproducts of n-B decomposition. This novel strategy of constructing cooperative sites provides a distinct pathway for promoting the synergistic removal of n-B and NOx.

Air Quality, Health, and Equity Benefits of Carbon Neutrality and Clean Air Pathways in China.

In the pursuit of carbon neutrality, China's 2060 targets have been largely anchored in reducing greenhouse gas emissions, with less emphasis on the consequential benefits for air quality and public health. This study pivots to this critical nexus, exploring how China's carbon neutrality aligns with the World Health Organization's air quality guidelines (WHO AQG) regarding fine particulate matter (PM2.5) exposure. Coupling a technology-rich integrated assessment model, an emission-concentration response surface model, and exposure and health assessment, we find that decarbonization reduces sulfur dioxide (SO2), nitrogen oxides (NOx), and PM2.5 emissions by more than 90%; reduces nonmethane volatile organic compounds (NMVOCs) by more than 50%; and simultaneously reduces the disparities across regions. Critically, our analysis reveals that further targeted reductions in air pollutants, notably NH3 and non-energy-related NMVOCs, could bring most Chinese cities into attainment of WHO AQG for PM2.5 5 to 10 years earlier than the pathway focused solely on carbon neutrality. Thus, the integration of air pollution control measures into carbon neutrality strategies will present a significant opportunity for China to attain health and environmental equality.

Integrated Benefits of Synergistically Reducing Air Pollutants and Carbon Dioxide in China.

China's advancements in addressing air pollution and reducing CO2 emissions offer valuable lessons for collaborative strategies to achieve diverse environmental objectives. Previous studies have assessed the mutual benefits of climate policies and air pollution control measures on one another, lacking an integrated assessment of the benefits of synergistic control attributed to refined measures. Here, we comprehensively used coupled emission inventory and response models to evaluate the integrated benefits and synergy degrees of various measures in reducing air pollutants and CO2 in China during 2013-2021. Results indicated that the implemented measures yielded integrated benefits value at 6.7 (2.4-12.6) trillion Chinese Yuan. The top five contributors, accounting for 55%, included promoting non-thermal power, implementing end-of-pipe control technologies in power plants and iron and steel industry, replacing residential scattered coal, and saving building energy. Measures demonstrating high synergies and integrated benefits per unit of reduction (e.g., green traffic promotion) yielded low benefits mainly due to their low application, which are expected to gain greater implementation and prioritization in the future. Our findings provide insights into the effectiveness and limitations of strategies aimed at joint control. By ranking these measures based on their benefits and synergy, we offer valuable guidance for policy development in China and other nations with similar needs.

Potential Strategy to Control the Organic Components of Condensable Particulate Matter: A Critical Review.

More and more attention has been paid to condensable particulate matter (CPM) since its emissions have surpassed that of filterable particulate matter (FPM) with the large-scale application of ultralow-emission reform. CPM is a gaseous material in the flue stack but instantly turns into particles after leaving the stack. It is composed of inorganic and organic components. Organic components are an important part of CPM, and they are an irritant, teratogenic, and carcinogenic, which triggers photochemical smog, urban haze, and acid deposition. CPM organic components can aggravate air pollution and climate change; therefore, consideration should be given to them. Based on existing methods for removing atmospheric organic pollutants and combined with the characteristics of CPM organic components, we provide a critical overview from the aspects of (i) fundamental cognition of CPM, (ii) common methods to control CPM organic components, and (iii) catalytic oxidation of CPM organic components. As one of the most encouraging methods, catalytic oxidation is discussed in detail, especially in combination with selective catalytic reduction (SCR) technology, to meet the growing demands for multipollutant control (MPC). We believe that this review is inspiring for a fuller understanding and deeper exploration of promising approaches to control CPM organic components.

Phosphotungstic Acid as a Dechlorination Agent Collaborates with CeO2 for Synergistic Catalytic Elimination of NOx and Chlorobenzene.

The development of efficient technologies for the synergistic catalytic elimination of NOx and chlorinated volatile organic compounds (CVOCs) remains challenging. Chlorine species from CVOCs are prone to catalyst poisoning, which increases the degradation temperature of CVOCs and fails to balance the selective catalytic reduction of NOx with the NH3 (NH3-SCR) performance. Herein, synergistic catalytic elimination of NOx and chlorobenzene has been originally demonstrated by using phosphotungstic acid (HPW) as a dechlorination agent to collaborate with CeO2. The conversion of chlorobenzene was over 80% at 270 °C, and the NOx conversion and N2 selectivity reached over 95% at 270-420 °C. HPW not only allowed chlorine species to leave as inorganic chlorine but also enhanced the BroÌ·nsted acidity of CeO2. The NH4+ produced in the NH3-SCR process can effectively promote the dechlorination of chlorobenzene at low temperatures. HPW remained structurally stable in the synergistic reaction, resulting in good water resistance and long-term stability. This work provides a cheaper and more environmentally friendly strategy to address chlorine poisoning in the synergistic reaction and offers new guidance for multipollutant control.

Pt on Atomic-Layered WO3 Islands: Electronic Tuning of Platinum-Tungsten Heterostructures for Highly Efficient Low-Temperature VOC Combustion.

Adjusting the electronic state of noble metal catalysts on a nanoscale is crucial for optimizing the performance of nanocatalysts in many important environmental catalytic reactions, particularly in volatile organic compound (VOC) combustion. This study reports a novel strategy for optimizing Pt catalysts by modifying their electronic structure to enhance the electron density of Pt. The research illustrates the optimal 0.2Pt-0.3W/Fe2O3 heterostructure with atomic-thick WO3 layers as a bulking block to electronically modify supported Pt nanoparticles. Methods such as electron microscopy, X-ray photoelectron spectroscopy, and in situ Fourier transform infrared spectroscopy confirm Pt's electron-enriched state resulting from electron transfer from atomic-thick WO3. Testing for benzene oxidation revealed enhanced low-temperature activity with moderate tungsten incorporation. Kinetic and mechanistic analyses provide insights into how the enriched electron density benefits the activation of oxygen and the adsorption of benzene on Pt sites, thereby facilitating the oxidation reaction. This pioneering work on modifying the electronic structure of supported Pt nanocatalysts establishes an innovative catalyst design approach. The electronic structure-performance-dependent relationships presented in this study assist in the rational design of efficient VOC abatement catalysts, contributing to clean energy and environmental solutions.

Monolithic Catalyst of Ni Foam-Supported MnOx for Boosting Magnetocaloric Oxidation of Toluene.

Catalytic oxidation has been considered an effective technique for volatile organic compound degradation. Development of metal foam-based monolithic catalysts coupling electromagnetic induction heating (EMIH) with efficiency and low energy is critical yet challenging in industrial applications. Herein, a Mn18.2-NF monolithic catalyst prepared by electrodeposition exhibited superior toluene catalytic activity under EMIH conditions, and the temperature of 90% toluene conversion decreased by 89 °C compared to that in resistance furnace heating. Relevant characterizations proved that the skin effect induced by EMIH encouraged activation of gaseous oxygen, leading to superior low-temperature redox properties of Mn18.2-NF under the EMIH condition. In situ Fourier transform infrared spectroscopy results showed that skin effect-induced activation of oxidizing species further accelerated the conversion of intermediates. As a result, the Mn18.2-NF monolithic catalyst under EMIH demonstrated remarkable performance for the toluene oxidation, surpassing the conventional nonprecious metal catalyst and other reported monolithic catalysts.

Changing Responses of PM2.5 and Ozone to Source Emissions in the Yangtze River Delta Using the Adjoint Model.

China's industrial restructuring and pollution controls have altered the contributions of individual sources to varying air quality over the past decade. We used the GEOS-Chem adjoint model and investigated the changing sensitivities of PM2.5 and ozone (O3) to multiple species and sources from 2010 to 2020 in the central Yangtze River Delta (YRDC), the largest economic region in China. Controlling primary particles and SO2 from industrial and residential sectors dominated PM2.5 decline, and reducing CO from multiple sources and ≥C3 alkenes from vehicles restrained O3. The chemical regime of O3 formation became less VOC-limited, attributable to continuous NOX abatement for specific sources, including power plants, industrial combustion, cement production, and off-road traffic. Regional transport was found to be increasingly influential on PM2.5. To further improve air quality, management of agricultural activities to reduce NH3 is essential for alleviating PM2.5 pollution, while controlling aromatics, alkenes, and alkanes from industry and gasoline vehicles is effective for O3. Reducing the level of NOX from nearby industrial combustion and transportation is helpful for both species. Our findings reveal the complexity of coordinating control of PM2.5 and O3 pollution in a fast-developing region and support science-based policymaking for other regions with similar air pollution problems.

Identifying Key Sources for Air Pollution and CO2 Emission Co-control in China.

China is confronting the dual challenges of air pollution and climate change, mandating the co-control of air pollutants and CO2 emissions from their shared sources. Here we identify key sources for co-control that prioritize the mitigation of PM2.5-related health burdens, given the homogeneous impacts of CO2 emissions from various sources. By applying an integrated analysis framework that consists of a detailed emission inventory, a chemical transport model, a multisource fused dataset, and epidemiological concentration-response functions, we systematically evaluate the contribution of emissions from 390 sources (30 provinces and 13 socioeconomic sectors) to PM2.5-related health impacts and CO2 emissions, as well as the marginal health benefits of CO2 abatement across China. The estimated source-specific contributions exhibit substantial disparities, with the marginal benefits varying by 3 orders of magnitude. The rural residential, transportation, metal, and power and heating sectors emerge as pivotal sources for co-control, with regard to their relatively large marginal benefits or the sectoral total benefits. In addition, populous and heavily industrialized provinces such as Shandong and Henan are identified as the key regions for co-control. Our study highlights the significance of incorporating health benefits into formulating air pollution and carbon co-control strategies for improving the overall social welfare.

Analysis of the dynamic mechanism of trans-boundary pollution collaborative control in the Yangtze River Economic Belt.

Climate change mitigation requires simultaneous reduction of carbon emissions and air pollution. This study examines the synergy between pollution reduction and carbon reduction, identifying key variables and strategies to achieve this goal. Using a Geographical Detector model and a Coupling Degree of Coordination model, 108 cities in the Yangtze River Economic Belt (YREB) are investigated. Results show that while controlling PM2.5 has been more successful than managing carbon emissions in the YREB, synergy between pollution reduction and carbon emissions increased by an average of 7.2% from 2006 to 2019. Spatial analysis reveals higher synergy in upstream areas, indicating significant spatial diversity. The impact of pollution and emission reduction synergies is influenced by societal and environmental variables, including industry structure, technological innovation, energy structure, human capital quality, and economic basis. Synergy is amplified when natural limits align with high-quality development drivers such as technical innovation and the digital economy. Recommendations include enhancing city-to-city contact, improving energy and industrial structures, and fostering technological innovation to address regional variations in synergy levels.

From wastewater to clean water: Recent advances on the removal of metronidazole, ciprofloxacin, and sulfamethoxazole antibiotics from water through adsorption and advanced oxidation processes (AOPs).

Antibiotics released into water sources pose significant risks to both human health and the environment. This comprehensive review meticulously examines the ecotoxicological impacts of three prevalent antibiotics-ciprofloxacin, metronidazole, and sulfamethoxazole-on the ecosystems. Within this framework, our primary focus revolves around the key remediation technologies: adsorption and advanced oxidation processes (AOPs). In this context, an array of adsorbents is explored, spanning diverse classes such as biomass-derived biosorbents, graphene-based adsorbents, MXene-based adsorbents, silica gels, carbon nanotubes, carbon-based adsorbents, metal-organic frameworks (MOFs), carbon nanofibers, biochar, metal oxides, and nanocomposites. On the flip side, the review meticulously examines the main AOPs widely employed in water treatment. This includes a thorough analysis of ozonation (O3), the photo-Fenton process, UV/hydrogen peroxide (UV/H2O2), TiO2 photocatalysis, ozone/UV (O3/UV), radiation-induced AOPs, and sonolysis. Furthermore, the review provides in-depth insights into equilibrium isotherm and kinetic models as well as prospects and challenges inherent in these cutting-edge processes. By doing so, this review aims to empower readers with a profound understanding, enabling them to determine research gaps and pioneer innovative treatment methodologies for water contaminated with antibiotics.

Efficient dissipation of acetamiprid, metalaxyl, S-metolachlor and terbuthylazine in a full-scale free water surface constructed wetland in Bologna province, Italy: A kinetic modeling study.

The study investigated the dissipation ability of a vegetated free water surface (FWS) constructed wetland (CW) in treating pesticides-contaminated agricultural runoff/drainage water in a rural area belonging to Bologna province (Italy). The experiment simulated a 0.1% pesticide agricultural water runoff/drainage event from a 12.5-ha farm by dissolving acetamiprid, metalaxyl, S-metolachlor, and terbuthylazine in 1000 L of water and pumping it into the CW. Water and sediment samples from the CW were collected for 4 months at different time intervals to determine pesticide concentrations by multiresidue extraction and chromatography-mass spectrometry analyses. In parallel, no active compounds were detected in the CW sediments during the experimental period. Pesticides dissipation in the wetland water compartment was modeled according to best data practices by fitting the data to Single First Order (SFO), First Order Multi-Compartment (FOMC) and Double First Order in Parallel (DFOP) kinetic models. SFO (except for metalaxyl), FOMC and DFOP kinetic models adequately predicted the dissipation for the four investigated molecules, with the DFOP kinetic model that better fitted the observed data. The modeled distribution of each pesticide between biomass and water in the CW highly correlated with environmental indexes as Kow and bioconcentration factor. Computed DT50 by DFOP model were 2.169, 8.019, 1.551 and 2.047 days for acetamiprid, metalaxyl, S-metolachlor, and terbuthylazine, respectively. Although the exact degradation mechanisms of each pesticide require further study, the FWS CW was found to be effective in treating pesticides-contaminated agricultural runoff/drainage water within an acceptable time. Therefore, this technology proved to be a valuable tool for mitigating pesticides runoff occurring after intense rain events.

Effect and mechanism of coexistence of microplastics on arsenate adsorption capacity in water.

Arsenic pollution control technology in water was important to ensure environmental health and quality safety of agricultural products. Therefore, the adsorption performance of three adsorbents for chitosan, sepiolite, and Zeolitic Imidazolate Framework-8 (ZIF-8) were investigated in arsenate contaminated water. The results revealed that the adsorption capacity of ZIF-8 was higher than that of chitosan and sepiolite. The analysis of adsorption isotherm models showed that the behavior of ZIF-8 was more consistent with the Langmuir model. Furthermore, the adsorption mechanisms of three adsorbents for arsenate were investigated by Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The analysis of FTIR showed that ZIF-8 maintained the stability of the interaction with arsenate by forming As-O chemical bonds. However, the effect of chitosan and sepiolite with arsenate was mainly physical adsorption. The analysis of XPS showed that the absorption of ZIF-8 with arsenate involved metal sites and nitrogen through the characteristic peak and the change of the binding energy. Furthermore, the impact of microplastics as a widespread coexistence pollutant in the water on adsorbent performance was investigated. The results indicated that the adsorption capacity of ZIF-8 was almost not affected by microplastics. The maximum adsorption amount of arsenate was changed from 73.45 mg/g to 81.89 mg/g. However, the maximum adsorption amount of chitosan and sepiolite decreased by 31.4 % and 11.6 %, respectively. The analysis of FTIR and XPS revealed that ZIF-8 enhances arsenate adsorption by forming N-O-As bonds in the presence of microplastics. This study provides scientific evidence for the management of arsenate pollution in water bodies, especially in complex water bodies containing microplastics.

The characteristics of fungal responses to uranium mining activities and analysis of their tolerance to uranium.

The influence of uranium (U) mining on the fungal diversity (FD) and communities (FC) structure was investigated in this work. Our results revealed that soil FC richness and FD indicators obviously decreased due to U, such as Chao1, observed OTUs and Shannon index (P<0.05). Moreover, the abundances of Mortierella, Gibberella, and Tetracladium were notably reduced in soil samples owing to U mining activities (P<0.05). In contrast, the abundances of Cadophora, Pseudogymnoascus, Mucor, and Sporormiella increased in all soil samples after U mining (P<0.05). Furthermore, U mining not only dramatically influenced the Plant_Pathogen guild and Saprotroph and Pathotroph modes (P<0.05), but also induced the differentiation of soil FC and the enrichment of the Animal_Pathogen-Soil_Saprotroph and Endophyte guilds and Symbiotroph and Pathotroph Saprotroph trophic modes. In addition, various fungal populations and guilds were enriched to deal with the external stresses caused by U mining in different U mining areas and soil depths (P<0.05). Finally, nine U-tolerant fungi were isolated and identified with a minimum inhibitory concentration range of 400-600 mg/L, and their adsorption efficiency for U ranged from 11.6% to 37.9%. This study provides insights into the impact of U mining on soil fungal stability and the response of fungi to U mining activities, as well as aids in the screening of fungal strains that can be used to promote remediation of U mining sites on plateaus.

A review of tire wear particles: Occurrence, adverse effects, and control strategies.

Tire wear particles (TWPs), common mixed particulate emerging contaminants in the environment, have global per capita emissions accounting for 0.23-1.9 kg/year, attracting global attention recently due to their wide detection, small size, mobility, and high toxicity. This review focuses on the occurrence characteristics of TWPs in multiple environmental media, adverse effects on organisms, potential toxicity mechanisms, and environmental risk prevention and control strategies of TWPs. The environmental fate of TWPs throughout the entire process is systematically investigated by the bibliometric analysis function of CiteSpace. This review supplements the gap in the joint toxicity and related toxicity mechanisms of TWPs with other environmental pollutants. Based on the risks review of TWPs and their additives, adverse impacts have been found in organisms from aquatic environments, soil, and humans, such as the growth inhibition effect on Chironomus dilutes. A multi-faceted and rationalized prevention and control treatment of "source-process-end" for the whole process can be achieved by regulating the use of studded tires, improving the tire additive formula, growing plants roadside, encouraging micro-degradation, and other methods, which are first reviewed. By addressing the current knowledge gaps and exploring prospects, this study contributes to developing strategies for reducing risks and assessing the fate of TWPs in multiple environmental media.

Breathing in danger: Understanding the multifaceted impact of air pollution on health impacts.

Air pollution, a pervasive environmental threat that spans urban and rural landscapes alike, poses significant risks to human health, exacerbating respiratory conditions, triggering cardiovascular problems, and contributing to a myriad of other health complications across diverse populations worldwide. This article delves into the multifarious impacts of air pollution, utilizing cutting-edge research methodologies and big data analytics to offer a comprehensive overview. It highlights the emergence of new pollutants, their sources, and characteristics, thereby broadening our understanding of contemporary air quality challenges. The detrimental health effects of air pollution are examined thoroughly, emphasizing both short-term and long-term impacts. Particularly vulnerable populations are identified, underscoring the need for targeted health risk assessments and interventions. The article presents an in-depth analysis of the global disease burden attributable to air pollution, offering a comparative perspective that illuminates the varying impacts across different regions. Furthermore, it addresses the economic ramifications of air pollution, quantifying health and economic losses, and discusses the implications for public policy and health care systems. Innovative air pollution intervention measures are explored, including case studies demonstrating their effectiveness. The paper also brings to light recent discoveries and insights in the field, setting the stage for future research directions. It calls for international cooperation in tackling air pollution and underscores the crucial role of public awareness and education in mitigating its impacts. This comprehensive exploration serves not only as a scientific discourse but also as a clarion call for action against the invisible but insidious threat of air pollution, making it a vital read for researchers, policymakers, and the general public.

Maritime Emission Monitoring: Development and Testing of a UAV-Based Real-Time Wind Sensing Mission Planner Module.

Maritime emissions contribute significantly to global pollution, necessitating accurate and efficient monitoring methods. Traditional methods for tracking ship emissions often face limitations in real-time data accuracy, with wind measurement being a critical yet challenging aspect. This paper introduces an innovative mission planner module for unmanned aerial vehicles (UAVs) that leverages onboard wind sensing capabilities to enhance maritime emission monitoring. The module's primary objective is to assist operators in making informed decisions by providing real-time wind data overlays, thus optimizing flight paths and data collection efficiency. Our experimental setup involves the testing of the module in simulated maritime environments, demonstrating its efficacy in varying wind conditions. The real-time wind data overlays provided by the module enable UAV operators to adjust their flight paths dynamically, reducing unnecessary power expenditure and mitigating the risks associated with low-battery scenarios, especially in challenging maritime conditions. This paper presents the implementation of real-time wind data overlays on an open-source state-of-the-art mission planner as a C# plugin that is seamlessly integrated into the user interface. The factors that affect performance, in terms of communication overheads and real-time operation, are identified and discussed. The operation of the module is evaluated in terms of functional integration and real-time visual representation of wind measurements, and the enhanced situational awareness that it can offer to mission controllers is demonstrated. Beyond presenting a novel application of UAV technology in environmental monitoring, we also provide an extensive discussion of how this work will be extended in the context of complete aerial environmental inspection missions and the future directions in research within the field that can potentially lead to the modernization of maritime emission monitoring practices.

Changes in source composition of wet nitrate deposition after air pollution control in a typical area of Southeast China.

In recent years, China has adopted numerous policies and regulations to control NOx emissions to further alleviate the adverse impacts of NO3--N deposition. However, the variation in wet NO3--N deposition under such policies is not clear. In this study, the southeastern area, with highly developed industries and traditional agriculture, was selected to explore the variation in NO3--N deposition and its sources changes after such air pollution control through field observation and isotope tracing. Results showed that the annual mean concentrations of NO3--N in precipitation were 0.67 mg L-1 and 0.54 mg L-1 in 2014-2015 and 2021-2022, respectively. The average wet NO3--N depositions in 2014-2015 and 2021-2022 was 7.76 kg N ha-1 yr-1 and 5.03 kg N ha-1 yr-1, respectively, indicating a 35% decrease. The δ15N-NO3- and δ18O-NO3- values were lower in warm seasons and higher in cold seasons, and both showed a lower trend in 2021-2022 compared with 2014-2015. The Bayesian model results showed that the NOx emitted from coal-powered plants contributed 53.6% to wet NO3--N deposition, followed by vehicle exhaust (22.9%), other sources (17.1%), and soil emissions (6.4%) during 2014-2015. However, the contribution of vehicle exhaust (33.3%) overpassed the coal combustion (32.3%) and followed by other sources (25.4%) and soil emissions (9.0%) in 2021-2022. Apart from the control of air pollution, meteorological factors such as temperature, precipitation, and solar radiation are closely related to the changes in atmospheric N transformation and deposition. The results suggest phased achievements in air pollution control and that more attention should be paid to the control of motor vehicle exhaust pollution in the future, at the same time maintaining current actions and supervision of coal-powered plants.

Leachate reduction and pollution control strategies for landfills in hilly areas based on site condition analysis and numerical simulation.

Landfill is an important means of municipal solid waste treatment. Previous studies have shown that the combination of "cut-off wall and pumping well" technology is an effective measure to deal with the leachate emission reduction and pollution control of landfill, and has been widely used in plain areas. However, for landfills in hilly areas with complex terrain and geological conditions, there is still a lack of clear and referable ideas and operational strategies for leachate emission reduction and pollution control. In this study, we proposed strategies for determining the position and depth of cut-off walls and pumping wells and reasonable combinations of the cut-off wall depth and pumping quantity for leachate reduction and pollution prevention of landfills in hilly areas. The determination of leachate reduction and pollution control strategy need to be achieved in two stages, qualitative and quantitative: (1) In the qualitative stage, the natural conditions (Weathering degree, groundwater flow characteristics, topography condition, hydrometeor condition, and aquifer thickness) and engineering conditions (Operation status, landfill location, and excavation status) of the study area are analysed in detail, and then the depth range and location of the cut-off wall and pumping well are determined. (2) In the quantitative stage, we need to quantify the combination of the cut-off wall depth and pumping quantity by using profile particle tracing and pollutant transport modelling. A reasonable cut-off wall depth needs to control the leakage of pollutants inside the wall, and a reasonable pumping quantity needs to ensure that the depth of the pollutant distribution is equivalent to the depth of the separation line, which separates the water flow towards the pumping well and the water flow downstream. (3) The effectiveness of the leachate reduction and prevention strategies proposed in this study was verified through an example of a landfill in Northeast China. This study provides a reference and operation method for leachate emission reduction and pollution control of landfills in hilly areas.

Understanding air pollution reduction from the perspective of synergy with carbon mitigation in China from 2008 to 2017.

In response to the dual challenges of air pollution control and carbon mitigation, China has strategically shifted its focus towards the synergistic reduction of air pollutants and CO2 emissions. This study identifies the potential areas and specific air pollutant species (including CO, NOx, and SO2) for co-reduction with carbon mitigation. We also reveal the driving forces behind the emissions of each air pollutant at both the national and regional scales. Our findings are as follows: (1) The potential for synergistic reduction of CO and SO2 with CO2 emissions has diminished in economically developed areas. There is a significant opportunity for co-reduction of SO2 and CO2 in the western and northern regions of China, particularly within Heilongjiang Province. (2) NOx is the key species for synergistic reduction with CO2 emissions across China, especially in the Chengyu Plain. (3) Cleaner production and the synergistic reduction effect are the primary contributors to national air pollutant reduction in China from 2008 to 2017. Conversely, efforts in economic development and energy efficiency have led to emission increases. Energy and industrial structures have only made limited contributions to emission reductions, and carbon mitigation shows an inhibition effect on emission reductions. These results offer valuable insights for developing targeted regional strategies for deeper air pollution control, considering the specific characteristics and needs of each region. Additionally, our findings highlight the importance of addressing policy misalignments and strengthening mutual-influence mechanisms between air pollution control and carbon mitigation, ensuring that policies for carbon reduction also effectively contribute to air quality improvements.