Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 621
Filtrar
1.
Proc Natl Acad Sci U S A ; 121(6): e2300644120, 2024 Feb 06.
Artigo em Inglês | MEDLINE | ID: mdl-38306481

RESUMO

It is unclear how severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection leads to the strong but ineffective inflammatory response that characterizes severe Coronavirus disease 2019 (COVID-19), with amplified immune activation in diverse cell types, including cells without angiotensin-converting enzyme 2 receptors necessary for infection. Proteolytic degradation of SARS-CoV-2 virions is a milestone in host viral clearance, but the impact of remnant viral peptide fragments from high viral loads is not known. Here, we examine the inflammatory capacity of fragmented viral components from the perspective of supramolecular self-organization in the infected host environment. Interestingly, a machine learning analysis to SARS-CoV-2 proteome reveals sequence motifs that mimic host antimicrobial peptides (xenoAMPs), especially highly cationic human cathelicidin LL-37 capable of augmenting inflammation. Such xenoAMPs are strongly enriched in SARS-CoV-2 relative to low-pathogenicity coronaviruses. Moreover, xenoAMPs from SARS-CoV-2 but not low-pathogenicity homologs assemble double-stranded RNA (dsRNA) into nanocrystalline complexes with lattice constants commensurate with the steric size of Toll-like receptor (TLR)-3 and therefore capable of multivalent binding. Such complexes amplify cytokine secretion in diverse uninfected cell types in culture (epithelial cells, endothelial cells, keratinocytes, monocytes, and macrophages), similar to cathelicidin's role in rheumatoid arthritis and lupus. The induced transcriptome matches well with the global gene expression pattern in COVID-19, despite using <0.3% of the viral proteome. Delivery of these complexes to uninfected mice boosts plasma interleukin-6 and CXCL1 levels as observed in COVID-19 patients.


Assuntos
COVID-19 , SARS-CoV-2 , Humanos , Animais , Camundongos , Células Endoteliais , Proteoma , Peptídeos
2.
Proc Natl Acad Sci U S A ; 120(6): e2211088120, 2023 Feb 07.
Artigo em Inglês | MEDLINE | ID: mdl-36716362

RESUMO

Hydrophobic polyelectrolytes (HPEs) can solubilize bilayer membranes, form micelles, or can reversibly aggregate as a function of pH. The transitions are often remarkably sharp. We show that these cooperative transitions occur by a competition between two or more conformational states and can be explained within the framework of Monod-Wymann-Changeux (MWC) theory that was originally formulated for allosteric interactions. Here, we focus on the pH-dependent destabilization and permeation of bilayer membranes by HPEs. We formulate the general conditions that lead to sharp conformational transitions involving simple macromolecules mediated by concentration variations of molecular ligands. That opens up potential applications ranging from medicine to the development of switchable materials.

3.
Proc Natl Acad Sci U S A ; 119(40): e2204163119, 2022 Oct 04.
Artigo em Inglês | MEDLINE | ID: mdl-36161915

RESUMO

Uniformly charged polyelectrolyte molecules disperse uniformly in aqueous electrolyte solutions, due to electrostatic repulsion between them. In stark contrast to this well-established result of homogeneous polyelectrolyte solutions, we report a phenomenon where an aqueous solution of positively charged poly(L-lysine) (PLL) exhibits precipitation of similarly charged macromolecules at low ionic strength and a homogeneous solution at very high ionic strength, with a stable mesomorphic state of spherical aggregates as an interlude between these two limits. The precipitation at lower ionic strengths that is orthogonal to the standard polyelectrolyte behavior and the emergence of the mesomorphic state are triggered by the presence of a monovalent small organic anion, acrylate, in the electrolyte solution. Using light scattering, we find that the hydrodynamic radius Rh of isolated PLL chains shrinks upon a decrease in electrolyte (NaBr) concentration, exhibiting the "anti-polyelectrolyte effect." In addition, Rh of the aggregates in the mesomorphic state depends on PLL concentration cp according to the scaling law, [Formula: see text]. Furthermore, at higher PLL concentration, the mesomorphic aggregates disassemble by a self-poisoning mechanism. We conjecture that all these findings can be attributed to both intra- and interchain dipolar interactions arising from the transformation of polycationic PLL into a physical polyzwitterionic PLL at higher concentrations of acrylate. The reported phenomenon of PLL exhibiting dipole-directed assembly of mesomorphic states and the anti-polyelectrolyte effect are of vital importance toward understanding more complex situations such as coacervation and formation of biomolecular condensates.

4.
Proc Natl Acad Sci U S A ; 119(32): e2203483119, 2022 Aug 09.
Artigo em Inglês | MEDLINE | ID: mdl-35925890

RESUMO

Many biopolymers are highly charged, and as in the case of many polymer mixtures, they tend to phase separate as a natural consequence of chain connectivity and an associated relatively low entropy of polymer mixing. Recently, it has become appreciated that the phase-separated structures formed by such polyelectrolyte blends, called "complex coacervates," underlie numerous biological structures and processes essential to living systems, and there has been intense interest in understanding the unique physical features of this type of phase-separation process. In the present work, we are particularly concerned with the field responsiveness of stabilized coacervate droplets formed after the phase separation of polyelectrolyte blend solution and then exposed to deionized water, making the droplet interfacial layer acquire a viscoelastic character that strongly stabilizes it against coalescence. We show that we can precisely control the positions of individual droplets and arrays of them with relatively low-voltage electric fields (on the order of 10 V/cm) and that the imposition of an oscillatory field gives rise to chain formation with coarsening of these chains into long fibers. Such a phase-separation-like process is generally observed in electrorheological fluids of solid colloidal particles subjected to much larger field strengths. The key to these coacervates' electrorheological properties is the altered interfacial viscoelastic properties when the droplets are introduced into deionized water and the associated high polarizability of the droplets, similar to the properties of many living cells. Since many different molecular payloads can be incorporated into these stable droplets, we anticipate many applications.

5.
Proc Natl Acad Sci U S A ; 119(26): e2120456119, 2022 06 28.
Artigo em Inglês | MEDLINE | ID: mdl-35727975

RESUMO

The association between two intrinsically disordered proteins (IDPs) may produce a fuzzy complex characterized by a high binding affinity, similar to that found in the ultrastable complexes formed between two well-structured proteins. Here, using coarse-grained simulations, we quantified the biophysical forces driving the formation of such fuzzy complexes. We found that the high-affinity complex formed between the highly and oppositely charged H1 and ProTα proteins is sensitive to electrostatic interactions. We investigated 52 variants of the complex by swapping charges between the two oppositely charged proteins to produce sequences whose negatively or positively charged residue content was more homogeneous or heterogenous (i.e., polyelectrolytic or polyampholytic, having higher or lower absolute net charges, respectively) than the wild type. We also changed the distributions of oppositely charged residues within each participating sequence to produce variants in which the charges were segregated or well mixed. Both types of changes significantly affect binding affinity in fuzzy complexes, which is governed by both enthalpy and entropy. The formation of H1-ProTa is supported by an increase in configurational entropy and by entropy due to counterion release. The latter can be twice as large as the former, illustrating the dominance of counterion entropy in modulating the binding thermodynamics. Complexes formed between proteins with greater absolute net charges are more stable, both enthalpically and entropically, indicating that enthalpy and entropy have a mutually reinforcing effect. The sensitivity of the thermodynamics of the complex to net charge and the charge pattern within each of the binding constituents may provide a means to achieve binding specificity between IDPs.


Assuntos
Histonas , Proteínas Intrinsicamente Desordenadas , Receptores Imunológicos , Entropia , Histonas/química , Humanos , Proteínas Intrinsicamente Desordenadas/química , Ligação Proteica , Receptores Imunológicos/química , Eletricidade Estática
6.
Small ; 20(13): e2306668, 2024 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-37967328

RESUMO

The large depletion region width at the electrode interface may cause serious energy loss in charge collection of organic solar cells (OSCs), depressing the open-circuit voltage and power conversion efficiency (PCE). Herein, a pH neutral solution-processed conjugated polyelectrolyte PIDT-F:IMC as hole transport layer (HTL) to reduce the depletion region width in efficient OSCs is developed. By utilizing "mutual doping" strategy, the doping density of PIDT-F:IMC is increased by more than two orders of magnitude, which significantly reduces the depletion region width at the anode interface from 55 to 7.4 nm, playing an effective role in decreasing the energy loss in hole collection. It is also revealed that the optimal thickness of HTL should be consistent with the depletion region width for achieving the minimum energy loss. The OSC modified by PIDT-F:IMC shows a high PCE of 18.2%, along with an amazing fill factor of 0.79. Moreover, a PCE of 16.5% is achieved in the 1 cm2 OSC by using a blade-coated PIDT-F:IMC HTL, indicating the good compatibility of PIDT-F:IMC with large-area processing technology. The PIDT-F:IMC-modified OCS exhibits a lifetime of 400 h under operational conditions, which is ten times longer than that of the PEDOT:PSS device.

7.
Chemistry ; 30(1): e202302157, 2024 Jan 02.
Artigo em Inglês | MEDLINE | ID: mdl-37751057

RESUMO

We report the fabrication of optically clear underwater adhesives using polyplexes of oppositely charged partially-thiolated polyamide polyelectrolytes (TPEs). The thiol content of the constituent PEs was varied to assess its influence on the adhesive properties of the resulting glues. These catechol-free, redox-responsive TPE-adhesives were formulated in aquo and exhibited high optical transparency and strong adhesion even on submerged or moist surfaces of diverse polar substrates such as glass, aluminium, wood, and bone pieces. The adhesives could be cured under water through oxidative disulphide crosslinking of the constituent TPEs. The polyamide backbone provided multi-site H-bonding interactions with the substrates while the disulphide crosslinking provided the cohesive strength to the glue. Strong adhesion of mammalian bones (load bearing capacity upto 7 kg/cm2 ) was achieved using the adhesive containing 30 mol % thiol residues. Higher pH and use of oxidants such as povidone-iodine solution enhanced the curing rate of the adhesives, and so did the use of Tris buffer instead of Phosphate buffer. The porous architecture of the adhesive and its progressive degradation in aqueous medium over the course of three weeks bode well for diverse biomedical applications where temporary adhesion of tissues is required.

8.
Mol Pharm ; 21(2): 791-800, 2024 Feb 05.
Artigo em Inglês | MEDLINE | ID: mdl-38206583

RESUMO

Studies on the biological performance of nanomedicines have been increasingly focused on the paradigm shifting role of the protein corona, which is imminently formed once the formulation is placed in a complex physiological environment. This phenomenon is predominantly studied in the context of protein adsorption science, while such interactions for water-soluble systems remain virtually unexplored. In particular, the importance of plasma protein binding is yet to be understood for pharmaceuticals designed on the basis of supramolecular architectures, which generally lack well-defined surfaces. Water-soluble ionic polyphosphazenes, clinically proven immunoadjuvants and vaccine delivery vehicles, represent an example of a system that requires supramolecular coassembly with antigenic proteins to attain an optimal immunopotentiating effect. Herein, the self-assembly behavior and stability of noncovalently bound complexes on the basis of a model antigen─hen egg lysozyme─and polyphosphazene adjuvant are studied in the presence of plasma proteins utilizing isothermal calorimetry, asymmetric flow field flow fractionation, dynamic light scattering, and size exclusion chromatography methods. The results demonstrate that although plasma proteins, such as human serum albumin (HSA), show detectable avidity to polyphosphazene, the strength of such interactions is significantly lower than that for the model antigen. Furthermore, thermodynamic parameters indicate different models of binding: entropy driven, which is consistent with the counterion release mechanism for albumin versus electrostatic interactions for lysozyme, which are characterized by beneficial enthalpy changes. In vitro protein release experiments conducted in Franz diffusion cells using enzyme-linked immunoassay detection suggest that the antigen-adjuvant complex stability is not adversely affected by the presence of the most physiologically abundant protein, which confirms the importance of the delivery modality for this immunoadjuvant. Moreover, HSA shows an unexpected stabilizing effect on complexes with high antigen load─an important consideration for further development of polyphosphazene adjuvanted vaccine formulations and their functional assessment.


Assuntos
Compostos Organofosforados , Polímeros , Vacinas , Humanos , Polímeros/química , Proteínas Sanguíneas , Adjuvantes Imunológicos/química , Água
9.
Macromol Rapid Commun ; 45(1): e2300396, 2024 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-37533353

RESUMO

Polythiophene-based conjugated polyelectrolytes (CPE) are attracting increasing attention as sensor or interface materials in chemistry and biology. While cationic polythiophenes are better understood, limited structural information is available on their anionic counterparts. Limited access to well-defined polymers has made the study of structure-property relationships difficult and clear correlations have remained elusive. By combining controlled Kumada catalyst transfer polymerization with a polymer-analog substitution, regioregular and narrowly distributed poly(6-(thiophen-3-yl)hexane-1-sulfonate)s (PTHS) with tailored chain length are prepared. Analysis of their aqueous solution structures by small-angle neutron scattering (SANS) revealed a cylindrical conformation for all polymers tested, with a length close to the contour length of the polymer chains, while the estimated radii remain too small (<1.5 nm) for extensive π-stacking of the chains. The latter is particularly interesting as the longest polymer exhibits a concentration-independent structured absorption typical of crystalline polythiophenes. Increasing the ionic strength of the solution diminishes these features as the Coulomb repulsion between the charged repeat units is shielded, allowing the polymer to adopt a more coiled conformation. The extended π-conjugation, therefore, appears to be a key parameter for these unique optical features, which are not present in the corresponding cationic polythiophenes.


Assuntos
Polímeros , Tiofenos , Polímeros/química , Polieletrólitos , Tiofenos/química , Conformação Molecular
10.
Macromol Rapid Commun ; : e2400453, 2024 Jul 16.
Artigo em Inglês | MEDLINE | ID: mdl-39012220

RESUMO

Here, the unresolved question of why single-chain nanoparticles (SCNPs) prepared from a weak polyelectrolyte (PE) precursor can be synthesized on a large is addresses, unlike SCNPs obtained from an equivalent neutral (nonamphiphilic) polymer precursor. The combination of the standard elastic single-chain nanoparticles (ESN) model -developed for neutral chains- with the classical scaling theory of PE solutions provides the key. Essentially, the long-range repulsion between electrostatic blobs in a weak PE precursor restricts the cross-linking process during SCNPs formation to the interior of each blob. Consequently, the maximum concentration at which PE-SCNPs can be prepared without interchain cross-linking is not determined by the full size of the PE precursor but, instead, by the smaller size of its electrostatic blobs. Therefore, PE-SCNPs can be synthesized up to a critical concentration where electrostatic blobs from different chains touch each other. This concentration can be 30 times higher than that for non-PE polymer precursors. Upon progressive dilution, the size of PE-SCNPs synthesized in concentrated solution increases until it reaches the bigger size of PE-SCNPs prepared under highly diluted conditions. PE-SCNPs do not adopt a globular conformation either in concentrated or in diluted solution. It shows that the main model predictions agree with experimental results.

11.
Macromol Rapid Commun ; 45(12): e2400048, 2024 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-38521990

RESUMO

Conjugated polymers (CPs) have been developed quickly as an emerging functional material with applications in optical and electronic devices, owing to their highly electron-delocalized backbones and versatile side groups for facile processibility, high mechanical strength, and environmental stability. CPs exhibit multistimuli responsive behavior and fluorescence quenching properties by incorporating azobenzene functionality into their molecular structures. Over the past few decades, significant progress has been made in developing functional azobenzene-based conjugated polymers (azo-CPs), utilizing diverse molecular design strategies and synthetic pathways. This article comprehensively reviews the rapidly evolving research field of azo-CPs, focusing on the structural characteristics and synthesis methods of general azo-CPs, as well as the applications of charged azo-CPs, specifically azobenzene-based conjugated polyelectrolytes (azo-CPEs). Based on their molecular structures, azo-CPs can be broadly categorized into three primary types: linear CPs with azobenzene incorporated into the side chain, linear CPs with azobenzene integrated into the main chain, and branched CPs containing azobenzene moieties. These systems are promising for biomedical applications in biosensing, bioimaging, targeted protein degradation, and cellular apoptosis.


Assuntos
Compostos Azo , Polímeros , Compostos Azo/química , Polímeros/química , Polímeros/síntese química , Técnicas Biossensoriais , Estrutura Molecular , Humanos
12.
Macromol Rapid Commun ; 45(12): e2400059, 2024 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-38538294

RESUMO

Many crucial components inside electronic devices are made from non-renewable, non-biodegradable, and potentially toxic materials, leading to environmental damage. Finding alternative green dielectric materials is mandatory to align with global sustainable goals. Carboxymethyl cellulose (CMC) is a bio-polymer derived from cellulose and has outstanding properties. Herein, citric acid, dextrin, and CMC based hydrogels are prepared, which are biocompatible and biodegradable and exhibit rubber-like mechanical properties, with Young modulus values of 0.89 MPa. Hence, thin film CMC-based hydrogel is explored as a suitable green high-k dielectric candidate for operation at low voltages, demonstrating a high dielectric constant of up to 78. These fabricated transistors reveal stable high capacitance (2090 nF cm-2) for ≈±3 V operation. Using a polyelectrolyte-type approach and poly-(2-vinyl anthracene) (PVAn) surface modification, this study demonstrates a thin dielectric layer (d ≈30 nm) with a small voltage threshold (Vth ≈-0.8 V), moderate transconductance (gm ≈65 nS), and high ON-OFF ratio (≈105). Furthermore, the dielectric layer exhibits stable performance under bias stress of ± 3.5 V and 100 cycles of switching tests. The modified CMC-based hydrogel demonstrates desirable performance as a green dielectric for low-voltage operation, further highlighting its biocompatibility.


Assuntos
Carboximetilcelulose Sódica , Dextrinas , Hidrogéis , Dextrinas/química , Carboximetilcelulose Sódica/química , Hidrogéis/química , Hidrogéis/síntese química , Materiais Biocompatíveis/química , Química Verde
13.
Macromol Rapid Commun ; : e2400416, 2024 Jun 26.
Artigo em Inglês | MEDLINE | ID: mdl-38924269

RESUMO

Copper-free synthesis of cationic glycidyl triazolyl polymers (GTPs) is achieved through a thermal azide-alkyne cycloaddition reaction between glycidyl azide polymer and propiolic acid, followed by decarboxylation and quaternization of the triazole unit. For synthesizing nonfunctionalized GTP (GTP-H), a microwave-assisted method enhances the decarboxylation reaction of carboxy-functionalized GTP (GTP-COOH). Three variants of cationic GTPs with different N-substituents [N-ethyl, N-butyl, and N-tri(ethylene glycol) monomethyl ether (EG3)] are synthesized. The molecular weight of GTP-H is determined via size exclusion chromatography. Thermal properties of all GTPs are characterized using differential scanning calorimetry and thermogravimetric analysis. The ionic conductivities of these cationic GTPs are assessed by impedance measurements. The conducting ion concentration and mobility are calculated based on the electrode polarization model. Among three cationic GTPs, the GTP with the N-EG3 substituent exhibits the highest ionic conductivity, reaching 6.8 × 10-6 S cm-1 at 25 °C under dry conditions. When compared to previously reported reference polymers, the reduction of steric crowding around the triazolium unit is considered to be a key factor in enhancing ionic conductivity.

14.
Sensors (Basel) ; 24(2)2024 Jan 12.
Artigo em Inglês | MEDLINE | ID: mdl-38257570

RESUMO

Currently, it is necessary to maintain the quality of aquifers and water bodies, which means the need for sensors that detect molecules as emerging pollutants (EPs) at low concentrations in aqueous complex solutions. In this work, an electronic tongue (e-tongue) prototype was developed to detect 17ß-estradiol in tap water. To achieve such a prototype, an array of sensors was prepared. Each sensor consists of a solid support with interdigitated electrodes without or with thin films prepared with graphene oxide, nanotubes, and other polyelectrolytes molecules adsorbed on them. To collect data from each sensor, impedance spectroscopy was used to analyze the electrical characteristics of samples of estrogen solutions with different concentrations. To analyze the collected data from the sensors, principal components analysis (PCA) method was used to create a three-dimensional plane using the calculated principal components, namely PC1 and PC2, and the estrogen concentration values. Then, damped least squares (DLS) was used to find the optimal values for the hyperplane calibration, as the sensitivity of this e-tongue was not represented by a straight line but by a surface. For the collected data, from nanotubes and graphene oxide sensors, a calibration curve for concentration given by the 10PC1×0.492-PC2×0.14-14.5 surface was achieved. This e-tongue presented a detection limit of 10-16 M of 17ß-estradiol in tap water.


Assuntos
Grafite , Nanotubos de Carbono , Polieletrólitos , Estradiol , Estrogênios , Língua , Água
15.
Angew Chem Int Ed Engl ; 63(2): e202310750, 2024 Jan 08.
Artigo em Inglês | MEDLINE | ID: mdl-37899307

RESUMO

Commercial adhesives typically fall into two categories: structural or pressure sensitive. Structural glues rely on covalent bonds formed during curing and provide high tensile strength whilst pressure-sensitive adhesives use physical bonding to provide weaker adhesion, but with considerable convenience for the user. Here, a new class of adhesive is presented that is also reversible, with a bond strength intermediate between those of pressure-sensitive and structural adhesives. Complementary water-based formulations incorporating oppositely charged polyelectrolytes form electrostatic bonds that may be reversed through immersion in a low or high pH aqueous environment. This electrostatic adhesive has the advantageous property that it exhibits good adhesion to low-energy surfaces such as polypropylene. Furthermore, it is produced by the emulsion copolymerization of commodity materials, styrene and butyl acrylate, which makes it inexpensive and opens the possibility of industrial production. Bio-based materials have been also integrated into the formulations to further increase sustainability. Moreover, unlike other water-based glues, adhesion does not significantly degrade in humid environments. Because such electrostatic adhesives do not require mechanical detachment, they are appropriate for the large-scale recycling of, e.g., bottle labels or food packaging. The adhesive is also suitable for dismantling components in areas as varied as automotive parts and electronics.

16.
Angew Chem Int Ed Engl ; 63(25): e202404382, 2024 Jun 17.
Artigo em Inglês | MEDLINE | ID: mdl-38616164

RESUMO

We formed core-shell-like polyelectrolyte complexes (PECs) from an anionic bottlebrush polymer with poly (acrylic acid) side chains with a cationic linear poly (allylamine hydrochloride). By varying the pH, the number of side chains of the polyanionic BB polymers (Nbb), the charge density of the polyelectrolytes, and the salt concentration, the phase separation behavior and salt resistance of the complexes could be tuned by the conformation of the BBs. By combining the linear/bottlebrush polyelectrolyte complexation with all-liquid 3D printing, flow-through tubular constructs were produced that showed selective transport across the PEC membrane comprising the walls of the tubules. These tubular constructs afford a new platform for flow-through delivery systems.

17.
Nanotechnology ; 34(40)2023 Jul 19.
Artigo em Inglês | MEDLINE | ID: mdl-37402360

RESUMO

Colloidal nanoparticles deposition on polyelectrolyte (PE) supporting layers is a widespread technique to achieve high density nanoparticle coatings, however the choice of the parameters is often not consistent and varies in different reports. Frequently the obtained films suffer from the aggregation and non-reproducibility. Here, we addressed the main variables in silver nanoparticles deposition-the immobilization time; concentration of the PE in the solution; the thickness of PE underlayer and overlayer; the concentration of salt in the PE solution during the formation of a underlayer. We report on the formation of the high-density silver nanoparticle films and ways to tune their optical density in the wide range using the immobilization time as well as the thickness of PE overlayer. Silver colloidal films with maximum reproducibility were obtained by adsorption of nanoparticles on 1 underlayer of 5 g l-1polydiallyldimethylammonium chloride with 0.5 M NaCl concentration. The results are promising for the fabrication of the reproducible colloidal silver films for multiple applications, such as plasmon enhanced fluorescent immunoassays and surface enhanced Raman scattering sensors.

18.
Macromol Rapid Commun ; 44(13): e2300089, 2023 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-36960540

RESUMO

This study demonstrates the hybridization of polyelectrolyte brushes with anti-inflammatory drug-loaded nanoMOFs that can achieve highly efficient aqueous lubrication and sustained drug release for the synergistic therapy of osteoarthritis (OA). Poly(3-sulfopropyl methacrylate potassium salt) (PSPMK) brushes are grown on the surface of the UiO-66-NH2 via one-pot grafting polymerization, which served as a general surface modification method of NH2 -MOFs to grow the polymer brushes. The growth of the PSPMK brushes greatly enhance the stability, dispersity, and swollen property of the AS-UiO-66-NH2@PSPMK in aqueous media. Using as lubricating additives, the UiO-66-NH2 @PSPMK achieves not only reductions in both coefficient of friction and wear volume over 70% and 99% but also supports high load-carrying capacity and long-term durability. The PSPMK brushes can be served as an universal interfacial modification soft layer that can significantly improve the aqueous lubricating performance of other types of NH2 -MOFs. After encapsulating the anti-inflammatory aspirin (AS), the AS-UiO-66-NH2 @PSPMK shows both sustained drug release and good biocompatibility toward the human normal chondrocytes. This work establishes anti-inflammatory drug-loaded UiO-66-NH2 @PSPMK as a potential multifunctional joint lubricant for OA treatment.


Assuntos
Estruturas Metalorgânicas , Compostos Organometálicos , Humanos , Polieletrólitos , Lubrificação , Liberação Controlada de Fármacos , Aspirina
19.
Proc Natl Acad Sci U S A ; 117(33): 19677-19684, 2020 08 18.
Artigo em Inglês | MEDLINE | ID: mdl-32747575

RESUMO

Understanding nanoscale interactions at the interface between two media with different dielectric constants is crucial for controlling many environmental and biological processes, and for improving the efficiency of energy storage devices. In this contributed paper, we show that polarization effects due to such dielectric mismatch remarkably influence the double-layer structure of a polyelectrolyte solution confined between two charged surfaces. Surprisingly, the electrostatic potential across the adsorbed polyelectrolyte double layer at the confining surface is found to decrease with increasing surface charge density, indicative of a negative differential capacitance. Furthermore, in the presence of polarization effects, the electrostatic energy stored in the double-layer structure is enhanced with an increase in the charge amplification, which is the absorption of ions on a like-charged surface. We also find that all of the important double-layer properties, such as charge amplification, energy storage, and differential capacitance, strongly depend on the polyelectrolyte backbone flexibility and the solvent quality. These interesting behaviors are attributed to the interplay between the conformational entropy of the confined polyelectrolytes, the Coulombic interaction between the charged species, and the repulsion from the surfaces with lower dielectric constant.

20.
Proc Natl Acad Sci U S A ; 117(10): 5168-5175, 2020 03 10.
Artigo em Inglês | MEDLINE | ID: mdl-32094183

RESUMO

Uncharged bottlebrush polymer melts and highly charged polyelectrolytes in solution exhibit correlation peaks in scattering measurements and simulations. Given the striking superficial similarities of these scattering features, there may be a deeper structural interrelationship in these chemically different classes of materials. Correspondingly, we constructed a library of isotopically labeled bottlebrush molecules and measured the bottlebrush correlation peak position [Formula: see text] by neutron scattering and in simulations. We find that the correlation length scales with the backbone concentration, [Formula: see text], in striking accord with the scaling of ξ with polymer concentration cP in semidilute polyelectrolyte solutions [Formula: see text] The bottlebrush correlation peak broadens with decreasing grafting density, similar to increasing salt concentration in polyelectrolyte solutions. ξ also scales with sidechain length to a power in the range of 0.35-0.44, suggesting that the sidechains are relatively collapsed in comparison to the bristlelike configurations often imagined for bottlebrush polymers.

SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa