Effects of combined microplastic and cadmium pollution on sorghum growth, Cd accumulation, and rhizosphere microbial functions.

The interaction between microplastics (MPs) and cadmium (Cd) poses a threat to agricultural soil environments, and their effects on plant growth and rhizosphere microbial community functions are not yet clear. In this study, energy sorghum was used as a test plant to investigate the effects of two types of MPs, polystyrene (PS) and polyethylene (PE), at different particle sizes (13 µm, 550 µm) and concentrations (0.1%, 1% w/w), and Cd, as well as their interactions, on the growth of sorghum in a soil-cultivation pot experiment. The results showed that the combined effects of MP and Cd pollution on the dry weight and Cd accumulation rate in sorghum varied depending on the type, concentration, and particle size of the MPs, with an overall trend of increasing stress from combined pollution with increasing Cd content and accumulation. High-throughput sequencing analysis revealed that combined MP and Cd pollution increased bacterial diversity, and the most significant increase was observed in the abundance-based coverage estimator (ACE), Shannon, and Sobs indices in the 13 µm 1% PS+Cd treatment group. Metagenomic analysis based on the Kyoto Encyclopedia of Genes and Genomes (KEGG) metabolic pathways revealed that 19 groups of metabolic pathways, including microbial metabolism and methane metabolism, differed significantly under combined MP and Cd pollution. Hierarchical clustering results indicated that Cd treatment and combined MP and Cd treatment affected the abundances of sorghum rhizosphere soil nitrogen (N) and phosphorus (P) cycling genes and that the type of MP present was an important factor affecting N and P cycling genes. The results of this study provide a basis for exploring the toxic effects of combined MP and Cd pollution and for conducting soil environmental risk assessments.

Relationship between the Carbonyl Index (CI) and Fragmentation of Polyolefin Plastics during Aging.

The durability of plastics in the marine environment has emerged as a crucial environmental issue. However, the contribution of several factors and the threshold point after which a plastic product generates secondary micro- and nanoplastics is still unclear. To investigate the interaction of environmental parameters with the physicochemical properties of polyethylene (PE) and polypropylene (PP) films in the marine environment, polyolefin films were subjected to weathering in emulated coastal and marine environments for 12 months, focusing on the relationship between radiation load, alteration on the surface, and subsequent generation of microplastics (MPs). The weight average molecular weight (Mw) was found to be strongly correlated with the generated particles and the Feret diameter, implying the generation of secondary microplastics at decreased Mw. A significant and strong relationship between the carbonyl index (CI) and the Feret diameter for PP films weathered on beach sand was identified. This CI-fragmentation relationship involves three sequential stages and suggests that spontaneous fragmentation occurs at CI values above 0.7.

The Role of Phase Migration of Carbon Nanotubes in Melt-Mixed PVDF/PE Polymer Blends for High Conductivity and EMI Shielding Applications.

In this work, the effects of blend ratio and mixing time on the migration of multi-walled carbon nanotubes (MWCNTs) within poly(vinylidene fluoride) (PVDF)/polyethylene (PE) blends are studied. A novel two-step mixing approach was used to pre-localize MWCNTs within the PE phase, and subsequently allow them to migrate into the thermodynamically favored PVDF phase. Light microscopy images confirm that MWCNTs migrate from PE to PVDF, and transmission electron microscopy (TEM) images show individual MWCNTs migrating fully into PVDF, while agglomerates remained trapped at the PVDF/PE interface. PVDF:PE 50:50 and 20:80 polymer blend nanocomposites with 2 vol% MWCNTs exhibit exceptional electromagnetic interference shielding effectiveness (EMI SE) at 10 min of mixing (13 and 16 dB, respectively-at a thickness of 0.45 mm), when compared to 30 s of mixing (11 and 12 dB, respectively), suggesting the formation of more interconnected MWCNT networks over time. TEM images show that these improved microstructures are concentrated on the PE side of the PVDF/PE interface. A modified version of the "Slim-Fast-Mechanism" is proposed to explain the migration behavior of MWCNTs within the PVDF/PE blend. In this theory, MWCNTs approaching perpendicular to the interface penetrate the PVDF/PE interface, while those approaching in parallel or as MWCNT agglomerates remain trapped. Trapped MWCNTs act as barriers to additional MWCNTs, regardless of geometry. This mechanism is verified via TEM and scanning electron microscopy and suggests the feasibility of localizing MWCNTs at the interface of PVDF/PE blends.

Curcumin Inhibits Polyethylene-Induced Osteolysis via Repressing NF-κB Signaling Pathway Activation.

BACKGROUND/AIMS: Aseptic loosening is a common reason for failed artificial hip replacement after total hip arthroplasty. Aseptic loosening is mostly the result of wear debris that causes osteolysis and weakens the structures that support the prosthesis. Wear debris plays a crucial role in osteolysis during the loosening process, and polyethylene (PE) particles are found as wear debris more frequently than any other type of particle. In the absence of effective therapeutic agents, osteolysis has been hard to treat. Previous studies have demonstrated that curcumin influences signalosome-associated kinases and the proteasome-ubiquitin system during osteoclastogenesis. The aims of this study were to explore the anti-osteolysis effect of curcumin and if possible to identify the signaling pathway involved in a model of PE-induced osteolysis. METHODS: Differentiation of osteoclasts was induced in vitro by PE particles in RAW264.7 (monocyte/macrophage) cells and in vivo by calvarial and air pouch models of osteolysis established by PE stimulation in mice. We performed a set of TRAP staining, realtime polymerase chain reaction (PCR), and Western blot experiments to evaluate the anti-osteolytic effect of curcumin by comparing specimens that were exposed and not exposed to curcumin. RESULTS: Curcumin had a promising inhibitory effect on osteolysis induced by wear debris and suppressed the RANK/c-Fos/NFATc1 signaling pathway. CONCLUSION: Curcumin can prevent PE-induced osteolysis and bone loss. An inhibitory effect on the RANK/c-Fos/NFATc1 signaling pathway may explain the anti-osteolysis activity of curcumin.

Assessment of Ingested Micro- and Nanoplastic (MNP)-Mediated Genotoxicity in an In Vitro Model of the Small Intestinal Epithelium (SIE).

Micro- and nanoplastics (MNPs) have become ubiquitous contaminants of water and foods, resulting in high levels of human ingestion exposure. MNPs have been found in human blood and multiple tissues, suggesting that they are readily absorbed by the gastrointestinal tract (GIT) and widely distributed. Growing toxicological evidence suggests that ingested MNPs may pose a serious health threat. The potential genotoxicity of MNPs, however, remains largely unknown. In this study, genotoxicity of primary and environmentally relevant secondary MNPs was assessed in a triculture small intestinal epithelium (SIE) model using the CometChip assay. Aqueous suspensions of 25 and 1000 nm carboxylated polystyrene spheres (PS25C and PS1KC), and incinerated polyethylene (PEI PM0.1) were subjected to simulated GIT digestion to create physiologically relevant exposures (digestas), which were applied to the SIE model at final MNP concentrations of 1, 5, and 20 µg/mL for 24 or 48 h. PS25C and PS1KC induced DNA damage in a time- and concentration-dependent manner. To our knowledge, this is one of the first assessment of MNP genotoxicity in an integrated in vitro ingestion platform including simulated GIT digestion and a triculture SIE model. These findings suggest that ingestion of high concentrations of carboxylated PS MNPs could have serious genotoxic consequences in the SIE.

Critical evaluation of hyperspectral imaging technology for detection and quantification of microplastics in soil.

In this study, we critically evaluated the performance of an emerging technology, hyperspectral imaging (HSI), for detecting microplastics (MPs) in soil. We examined the technology's robustness against varying environmental conditions in five groups of experiments. Our findings show that near-infrared (NIR) hyperspectral imaging (HSI) effectively detects microplastics (MPs) in soil, though detection efficacy is influenced by factors such as MP concentration, color, and soil moisture. We found a generally linear relationship between the levels of MPs in various soils and their spectral responses in the NIR HSI imaging spectrum. However, effectiveness is reduced for certain MPs, like polyethylene, in kaolinite clay. Furthermore, we showed that soil moisture considerably influenced the detection of MPs, leading to nonlinearities in quantification and adding complexities to spectral analysis. The varied responses of MPs of different sizes and colors to NIR HSI present further challenges in detection and quantification. The research suggests pre-grouping of MPs based on size before analysis and proposes further investigation into the interaction between soil moisture and MP detectability to enhance HSI's application in MP monitoring and quantification. To our knowledge, this study is the first to comprehensively evaluate this technology for detecting and quantifying microplastics.

Plant growth-promoting bacteria improve the Cd phytoremediation efficiency of soils contaminated with PE-Cd complex pollution by influencing the rhizosphere microbiome of sorghum.

Composite pollution by microplastics and heavy metals poses a potential threat to the soilplant system and has received increasing attention. Plant growth-promoting bacteria (PGPB) have good application potential for the remediation of combined microplastic and heavy metal pollution, but few related studies exist. The present study employed a pot experiment to investigate the effects of inoculation with the PGPB Bacillus sp. SL-413 and Enterobacter sp. VY-1 on sorghum growth and Cd accumulation under conditions of combined cadmium (Cd) and polyethylene (PE) pollution. Cd+PE composite contamination led to a significant reduction in sorghum length and biomass due to increased toxicity. Inoculation with Bacillus sp. SL-413 and Enterobacter sp. VY-1 alleviated the stress caused by Cd+PE complex pollution, and the dry weight of sorghum increased by 25.7% to 46.1% aboveground and by 12.3% to 45.3% belowground. Bacillus sp. SL-413 and Enterobacter sp. VY-1 inoculation increased the Cd content and accumulation in sorghum and improved the phytoremediation efficiency of Cd. The inoculation treatment effectively alleviated the nutrient stress caused by the reduction in soil mineral nutrients due to Cd+PE composite pollution. The composition of the soil bacterial communities was also affected by the Cd, Cd+PE and bacterial inoculation treatments, which affected the diversity of the soil bacterial communities. Network analyses indicated that bacterial inoculation regulated the interaction of rhizospheric microorganisms and increased the stability of soil bacterial communities. The Mantel test showed that the changes in the soil bacterial community and function due to inoculation with Bacillus sp. SL-413 and Enterobacter sp. VY-1 were important factors influencing sorghum growth and Cd remediation efficiency. The results of this study will provide new evidence for the research on joint plantmicrobe remediation of heavy metal and microplastic composite pollution.

Elucidating polyethylene microplastic degradation mechanisms and metabolic pathways via iron-enhanced microbiota dynamics in marine sediments.

The extensive use of plastics has given rise to microplastics, a novel environmental contaminant that has sparked considerable ecological and environmental concerns. Biodegradation offers a more environmentally friendly approach to eliminating microplastics, but their degradation by marine microbial communities has received little attention. In this study, we used iron-enhanced marine sediment to augment the natural bacterial community and facilitate the decomposition of polyethylene (PE) microplastics. The introduction of iron-enhanced sediment engendered an augmented bacterial biofilm formation on the surface of polyethylene (PE), thereby leading to a more pronounced degradation effect. This novel observation has been ascribed to the oxidative stress-induced generation of a variety of oxygenated functional groups, including hydroxyl (-OH), carbonyl (-CO), and ether (-C-O) moieties, within the microplastic substrate. The analysis of succession in the community structure of sediment bacteria during the degradation phase disclosed that Acinetobacter and Pseudomonas emerged as the principal bacterial players in PE degradation. These taxa were directly implicated in oxidative metabolic pathways facilitated by diverse oxidase enzymes under iron-facilitated conditions. The present study highlights bacterial community succession as a new pivotal factor influencing the complex biodegradation dynamics of polyethylene (PE) microplastics. This investigation also reveals, for the first time, a unique degradation pathway for PE microplastics orchestrated by the multifaceted marine sediment microbiota. These novel insights shed light on the unique functional capabilities and internal biochemical mechanisms employed by the marine sediment microbiota in effectively degrading polyethylene microplastics.

Dissociation of polyethylene liners with the Depuy Pinnacle cup: a report of 26 cases.

BACKGROUND: Although the Pinnacle Acetabular Hip System (DePuy Synthes) has demonstrated excellent survivorship results since it was first introduced in 2003, there have been a growing number of cases indicating that Pinnacle liners may be subject to a higher-than-expected rate of early dissociation failure. Between 2006 and 2020, our Centre received 212 retrieved Pinnacle liners from Western Australian hospitals. Of these, 26 were removed due to liner dissociation. METHODS: To better understand the frequency and cause of this complication we assessed all retrieved Pinnacle acetabular components for type, damage modes and patient demographics. The leverage force required to dissociate Pinnacle liners was also measured and compared with another commonly used acetabular system, the Trident (Stryker Orthopaedics). RESULTS: The estimated minimum incidence of liner dissociation from our data was 0.35%. Characterisation of dissociated Pinnacle cases (n = 26) revealed 73% were female with an average age of 59 compared to all retrieved Pinnacle cases (n = 212) where 58% were female with an average age of 66. Retrieval analysis indicated plastic deformation of the liner into an ovoid shape, signs of impingement on the rim postero-superiorly and shearing of the liner's anti-rotation tabs was common. Mechanical testing indicated that the dissociation strength of Pinnacle cups decreases at approximately 6.6 N/year in situ (p = 0.01). CONCLUSION: The survival rate of Pinnacle acetabular cups is exceptional with only 5% revised at 10 years. However, surgeons should be aware of the clinical symptoms and high-risk demographics when assessing patients with polyethylene Pinnacle liners.

[Sorption Characteristics and Site Energy Distribution Theory of Typical Estrogens on Microplastics].

Microplastics (MPs) and estrogens are high-profile emerging contaminants at present, and MPs might become the carrier of estrogens in the environment and induce combined pollution. To study the adsorption behavior of polyethylene (PE) microplastics to typical estrogens, the adsorption isothermal properties of the six estrogens[estrone (E1), 17α-estradiol (17α-E2), 17ß-estradiol (17ß-E2), estriol (E3), diethylstilbestrol (DES), and ethinylestradiol (17α-EE2)] in single-solute and mixed-solute systems were studied through batch equilibrium adsorption experiments, in which the PE microplastics before and after adsorption were characterized by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Then, the site energy distribution theory of the adsorption of six estrogens on PE microplastics was further analyzed based on the Freundlich model. The results showed that the adsorption process of selected estrogens with two concentrations (100 µg·L-1 and 1000 µg·L-1) on PE were more consistent with the pseudo-second order kinetic model. The increase in initial concentration reduced the equilibrium time of adsorption and increased the adsorbing capacity of estrogens on PE. In the single system (one estrogen) or mixed system (six estrogens) with different concentrations (10 µg·L-1-2000 µg·L-1), the Freundlich model showed the best fitting effect for the adsorption isotherm data (R2>0.94). The results of isothermal adsorption experiments and XPS and FTIR spectra showed that the adsorption of estrogens on PE in the two systems was heterogeneous adsorption, and hydrophobic distribution and van der Waals forces were the principal factors in the process of adsorption. The occurrence of C-O-C (in only the DES and 17α-EE2 systems) and O-C[FY=,1]O (in only the 17α-EE2 system) indicated that the adsorption of synthetic estrogens on PE was affected slightly by chemical bonding function, but no obvious effects were observed for natural estrogens. The results of site energy distribution analysis showed that, compared with the single system, the adsorption site energy of each estrogen shifted to the high-energy region in its entirety in the mixed system, and the site energy increased by 2.15%-40.98%. The energy change in DES was the most significant among all of the estrogens, indicating its competitive advantage in the mixed system. The above results of this study can provide some reference for the study of adsorption behavior, mechanism of action, and environmental risks under the coexisting condition of organic pollutants and MPs.

Biochemical and transcriptomic responses of buckwheat to polyethylene microplastics.

The ubiquity of microplastic is widely recognized as pollution. Microplastic can affect the growth performances of plants. Buckwheat is a potential model crop to investigate plant responses to hazardous materials. Still, little is known about the response of buckwheat to microplastics. Thus, this study investigated the effect and uptake of polyethylene (PE) in buckwheat plant growth by monitoring the morphological and photosynthetic merits, antioxidant systems and transcriptome analysis of gene expression. Results confirmed that the impacts of PE on buckwheat growth were dose-dependent, while the highest concentration (80 mg/L) exposure elicited significantly negative responses of buckwheat. PE can invade buckwheat roots and locate in the vascular tissues. PE exposure disturbed the processes of carbon fixation and the synthesis of ATP from ADP + Pi in buckwheat leaves. The promotion of photosynthesis under PE exposure could generate extra energy for buckwheat leaves to activate antioxidant systems by increasing the antioxidant enzyme activities at an expense of morphological merits under microplastic stresses. Further in-depth study is warranted about figuring out the interactions between microplastics and biochemical responses (i.e., photosynthesis and antioxidant systems), which have great implications for deciphering the defense mechanism of buckwheat to microplastic stresses.

Degradation characteristics of polyethylene film by microorganisms from lake sediments.

Polyethylene (PE) exists widely in many habitats as a persistent organic pollution and poses a major threat to the ecological environment. In this study, bacterial communities in freshwater lake sediments were exposed to culture media using PE films as the sole carbon source in aerobic and anaerobic microculture environments, and they were able to adhere and adapt to the PE films for a longer period of time. The results demonstrated that the pH value of the medium in the two cultural conditions was distinct, as were the rates of films weight loss and surface functional group alterations. We also concluded the certain bacterial genera from freshwater lake sediments who may be able to degrade PE films under either aerobic or anaerobic conditions. Simultaneously, the dominating bacterial communities between the medium and the film differed significantly under two cultural settings, as did the community composition, while metabolism was the primary function.

[Effects of Combined Stress of Polyethylene and Sulfamethazine on Seed Germination, Seedling Growth, and Physiological Characteristics of Soybean].

The combined pollution of antibiotics adsorption by microplastics has become inevitable in soil ecosystems; moreover, the plant biological effects under combined stress remain unclear. This study used soybean variety Jindou 21 as the material and conducted seed germination test and soil-potted seedling experiment to study the effects of different single and combined treatments of polyethylene (PE) and sulfamethazine (SMZ) on seed germination, seedling growth, photosynthetic parameters, chlorophyll fluorescence parameters, and nitrogen metabolism. The results showed that single PE treatment at low levels promoted soybean seed germination and seedling growth physiology; however, inhibited them at a high level. A lower-level PE treatment[10 mg·L-1 (or mg·kg-1)] could promote soybean seed germination, seedling growth, photosynthesis, and nitrogen metabolism, whereas a higher level PE treatment[100 mg·L-1 and 200 mg·L-1 (or mg·kg-1)] had significant inhibition. The single SMZ treatment had different degrees of inhibition on soybean seed germination and seedling growth physiology, and the inhibition degree increased with the increase in SMZ treatment level. Under the different levels of combined treatments of PE and SMZ, adding the lower level PE treatment could alleviate the inhibition of the single SMZ treatment on soybean, with 10 mg·L-1(or mg·kg-1) PE+1 mg·L-1(or mg·kg-1) SMZ treatment having the best comprehensive mitigation effect, which could increase soybean seed germination potential, germination rate, germination index, vigor index, plant height, root length, shoot and root fresh weight, Pn, Gs, Tr, chlorophyll contents, Fv/Fm, ΦPSⅡ, ETR, qP, and key enzyme activities for nitrogen metabolism such as NR and decrease the average germination time, Ci, NPQ, and NO3--N and NH4+-N contents compared with those in the single SMZ treatment. Adding the higher level PE treatment enhanced the inhibition of SMZ on soybean, and the inhibition degree increased with the increase in SMZ treatment level, in which 200 mg·L-1(or mg·kg-1) PE+50 mg·L-1(or mg·kg-1) SMZ treatment yielded the greatest inhibition. In summary, the lower level PE treatment could alleviate the inhibition of SMZ on soybean seeds and seedlings to a certain extent; however, the higher level PE treatment could produce a synergistic effect with SMZ, thus aggravating the toxic effect of the single stress treatment.

Adsorption and desorption characteristics of heavy metals onto conventional and biodegradable plastics.

Biodegradable plastics have been widely used to replace conventional plastics to minimize environmental impacts of plastic packaging. However, before biodegradable plastics decompose in the environment, they could pose a threat to terrestrial and aquatic creatures by acting as vectors of contaminants in the food chain. In this study, conventional plastic bags (CPBs) made of polyethylene and biodegradable plastic bags (BPBs) made of polylactic acid were examined for their heavy metal adsorption. Effects of solution pHs and temperatures on adsorption reactions were investigated. Because of a larger BET surface area, presence of oxygen-containing function groups, and smaller crystallinity, the heavy metal adsorption capacities of BPBs are significantly larger than those of CPBs. Among Cu (up to 791.48 mg⋅kg-1), Ni (up to 60.88 mg⋅kg-1), Pb (up to 1414.58 mg⋅kg-1), and Zn (up to 295.17 mg⋅kg-1), Pb and Ni show the largest and the lowest extents of adsorption onto the plastic bags, respectively. In the different waterbodies in nature, Pb adsorption on the CPBs and the BPBs were 318.09-379.91 and 528.41-764.22 mg⋅kg-1, respectively. Consequently, Pb was selected as the target contaminant in the desorption experiments. After Pb was adsorbed onto the CPBs and the BPBs, Pb could be completely desorbed and released into simulated digestive systems in 10 h. In conclusion, BPBs could be potential vectors of heavy metals, and their suitability as a substitute for CPBs must be thoroughly investigated and confirmed.

Polyethylene degradation and heavy metals leaching under realistic tropical marine climate.

The study examines the influence of temperature and pH on the leaching of six heavy metals (HMs) species: aluminum (Al), zinc (Zn), chromium (Cr), copper (Cu), lead (Pb) and arsenic (As) from transparent polyethylene pellets into seawater. The idea is to understand the potential influence of intensifying global warming and ocean acidification towards microplastic toxicity in the ocean. HMs leaching was obvious by 24th hours, with most HMs concentration decreased in water by 120th and 240th hours except Al. Nevertheless, we report that temperature and pH do not influence the overall HMs leaching from PE pellets with statistical analysis showing no significance (p < 0.05) between temperature and pH toward HMs concentration. Instead, it is hypothesized that these two parameters may be crucial in promoting heavy metal adsorption onto PE pellets under tropical weathering. However, Field Emission Scanning Electron Microscope (FESEM) revealed that temperature and pH are influential in polymer aging and surficial breakdown where pellets exposed in warm, acidic waters showed the greatest extent of weathering. This study highlights that PE pellets exposed under tropical conditions may accelerate surficial degradation and possibly stimulate HMs adherence to the polymer as a pollution vector. Further consideration of metal behaviour in water and microbial activities is crucial to improve our understanding of microplastic toxicity under tropical weathering.

Experimental and Numerical Investigation of the Mechanical Properties of a Fiber-Reinforced Geopolymer Mortar Blast Resistant Panel.

Geopolymer materials have excellent properties such as high strength, low thermal conductivity, fire resistance, acid and alkali resistance, and low carbon emissions. They can be used as protective engineering materials in places with explosion risks. At present, the common composite blast resistant panel is in the form of a sandwich: the outer layer isgalvanized steel plate, and fiber cement board or calcium carbonate board is used as the inner layer material, as these boards have the advantages of easy installation, good fire resistance, and explosion resistance. This study investigates the effect of adding different types of fibers to geopolymer mortar on the mortar's basic mechanical properties, such as compression strength, bending strength, and impact resistance. The explosive resistance of the fiber-reinforced geopolymer mortar blast resistant panels was evaluated through free-air explosion. In this paper, experimental procedures and numerical simulation have been performed to study the failure modes, maximum deflection, and dynamic response of the fiber-reinforced geopolymer mortar blast resistant panel under free-air explosion. The research results can provide a reference for the design and production of blast resistant panels.

[Biodegradation of Polyethylene Microplastic: A Review].

Over the recent decades, global plastic production has grown dramatically due to the huge demands of consumption. As a consequence, large amounts of plastic waste have accumulated in the environment and will be cleaved into microplastics. Due to the low bioavailability, the microplastics will exist in the environment persistently and cause massive environmental stress. Plastic pollution is currently one of the biggest environmental concerns. Recent studies have shown the possibility to obtain degrading microorganisms of microplastics from the natural environment. Some microorganisms can break down microplastics into water and carbon dioxide. This paper reviewed the current research on biodegradation of polyethylene (PE), which is the most abundant microplastic type in the environment, and discussed the quantification methods of the degradation effect. Given that current biodegradation efficiency is relatively limited, further research is required.

Stress response to oxytetracycline and microplastic-polyethylene in wheat (Triticum aestivum L.) during seed germination and seedling growth stages.

Much efforts have been devoted to clarify the phytotoxicity of individual contaminants in plants, such as individual antibiotic and microplastic; however, little is known about the phytotoxicity of their combined exposure. Here, we investigated the effects of individual and combined exposure of wheat (Triticum aestivum L.) (Xiaoyan 22) to oxytetracycline (OTC) and polyethylene (PE) microplastics using physiological and metabolic profilings. During the seed germination stage, OTC induced phytotoxicity, as observed through the changes of root elongation, sprout length, fresh weight and the vitality index, with significant effect at the 50 and 150 mg·L-1 levels; the effect of PE microplastics depended on the OTC level in the combined exposure groups. During seedling cultivation, catalase (CAT) and ascorbate peroxidase (APX), as antioxidant enzyme indices, were sensitive to OTC exposure stress, although OTC was not determined in leaves. Untargeted metabolomics of wheat leaves revealed OTC concentration-, metabolite class- and PE-dependent metabolic responses. Dominant metabolites included carboxylic acids, alcohols, and amines in the control group and all treatment groups. Compared to only OTC treatment, PE reprogrammed carboxylic acid and alcohol profiles in combined exposure groups with obvious separation in PLS-DA. Combined exposure induced fewer metabolites than OTC exposure alone at the 5 and 50 mg·L-1 levels. The shared metabolite numbers were higher in the OTC groups than in the PE-OTC groups. Pathway enrichment analysis showed a drift in metabolic pathways between individual and combined exposure to OTC and PE, which included glyoxylate and dicarboxylate metabolism, amino acid metabolism and isoquinoline alkaloid biosynthesis. Among metabolites, aromatic acids and amino acids were more sensitive to combined exposure than individual exposure. These results contribute to clarifying the underlying mechanisms of phytotoxicity of individual and combined exposure to OTC and PE.

Gravimetric analysis of stability of polymeric materials during exposure to chemical disinfectants at different temperatures.

The goal of this study was to evaluate the impact of thermal and chemical aging processes on high-density polyethylene (HDPE), low-density polyethylene (LDPE), unplasticized polyvinyl chloride (U-PVC), and high-impact polyvinyl chloride (Hi-PVC) pipes. The materials were exposed to 1-10 ppm chemical disinfectants [chlorine dioxide (ClO2) and hypochlorite (HOCl)] at 40-80 °C for 1200 h. The diffusion properties of the materials were systematically analyzed based on the change in their sorption characteristics and activation energies according to the Arrhenius model. Moreover, the structural changes were analyzed with scanning electron microscopy (SEM), Fourier transform infrared (FTIR) radiation, and thermogravimetric analysis (TGA). The results show that the materials have Fickian characteristics in the aging environment. Specifically, the water sorption rates of HDPE and LDPE increase first and then decrease after reaching saturation (Ms); those of U-PVC and Hi-PVC its increasing continuously with different rate. This behavior of materials was prominent for ClO2 at high temperature and disinfectant dose because of polymeric chains crosslinking and rearrangement, extraction of monomers, and stable compounds removal during aging under exposed conditions. The deleterious effects decreased the activation energies of the materials and increased the concentrations of carbonyl groups [CO] via the formation of ketones, aldehydes, and carboxylic acids. The decomposition temperature increased with the changes in the material morphology and elemental contents under the investigated conditions. Moreover, LDPE and Hi-PVC were more severely affected in the thermal aging process with 10 mg.L-1 ClO2 at 80 °C.

Tapered Waist Tensile Specimens for Evaluating Butt Fusion Joints of Polyethylene Pipes-Part 1: Development.

The structural integrity of butt fusion (BF) joints in thermoplastic pressure piping systems is critical to their long-term safe use. The tapered waist tensile (TWT) specimen was developed to alleviate issues associated with ISO 13953 waisted tensile (WT) specimen for evaluating BF joints. Experimental and finite element analyses were performed to obtain optimum TWT specimen designs for the BF joint destructive test. For TWT specimens, depending on the pipe size, the displacement at onset necking was reduced by 30~100%, and the tested BF area increased by 60~80% compared to the WT specimen. In addition, the transverse specimen deflection was lower thus providing better experimental stability. Furthermore, it showed the same BF displacement at the maximum force local to the BF bead, indicating that the tapered waist geometry provides equivalent deformation constraint and BF failure mode designed for the BF joint in the WT specimens. Therefore, TWT specimens offer simplicity, adaptability, stability, and accuracy in specimen preparation, testing, and analysis compared to WT specimens.