RESUMO
Two crystalline large-sized porous organic cages (POCs) based on conical calix[4]arene (C4A) were designed and synthesized. The four-jaw C4A unit tends to follow the face-directed self-assembly law with the planar triangular building blocks such as tris(4-aminophenyl)amine (TAPA) or 1,3,5-tris(4-aminophenyl)benzene (TAPB) to generate a predictable cage with a stoichiometry of [6+8]. The formation of the large cages is confirmed through their relative molecular mass measured using MALDI-TOF/TOF spectra. The protonated molecular ion peaks of C4A-TAPA and C4A-TAPB were observed at m/z 5109.0 (calculated for C336H240O24N32: m/z 5109.7) and m/z 5594.2 (calculated for C384H264O24N24: m/z 5598.4). C4A-POCs exhibit I-type N2 adsorption-desorption isotherms with the BET surface areas of 1444.9â m2 â g-1 and 1014.6â m2 â g-1. The CO2 uptakes at 273â K are 62.1â cm3 â g-1 and 52.4â cm3 â g-1 at a pressure of 100 KPa. The saturated iodine vapor static uptakes at 348â K are 3.9â g â g-1 and 3.5â g â g-1. The adsorption capacity of C4A-TAPA for SO2 reaches to 124.4â cm3 â g-1 at 298â K and 1.3â bar. Additionally, the adsorption capacities of C4A-TAPA for C2H2, C2H4, and C2H6 were evaluated.
RESUMO
Piezochromic materials that exhibit pressure-dependent luminescence variations are attracting interest with wide potential applications in mechanical sensors, anticounterfeiting and storage devices. Crystalline porous materials (CPMs) have been widely studied in piezochromism for highly tunable luminescence. Nevertheless, reversible and high-contrast emission response with a wide pressure range is still challenging. Herein, the first example of hierarchical porous cage-based πOF (Cage-πOF-1) with spring structure was synthesized by using aromatic chiral cages as building blocks. Its elastic properties evaluated based on the bulk modulus (9.5â GPa) is softer than most reported CPMs and the collapse point (20.0â GPa) significantly exceeds ever reported CPMs. As smart materials, Cage-πOF-1 displays linear pressure-dependent emission and achieves a high-contrast emission difference up to 154â nm. Pressure-responsive limit is up to 16â GPa, outperforming the CPMs reported so far. Dedicated experiments and density functional theory (DFT) calculations illustrate that π-π interactions-dominated controllable structural shrinkage and porous-spring-structure-mediated elasticity is responsible for the outstanding piezofluorochromism.
RESUMO
A continuous flow methodology for the facile and high-yielding synthesis of the porphyrin-based self-assembled organic cage, P12 L24 is reported, along with the serendipitous discovery of a kinetic product, P9 L18 cage, which has been characterized by MALDI-TOF MS, NMR, and AFM analysis. A theoretical study suggests a tricapped trigonal prismatic geometry for P9 L18 . Unlike P12 L24 , P9 L18 is unstable and readily decomposes into monomers and small oligomers. While the batch synthesis produces only the thermodynamic product P12 L24 , the continuous flow process generates not only the thermodynamic product but also kinetic products, such as P9 L18 , illustrating the advantages of the continuous flow process for the synthesis of self-assembled cages and the exploration of new non-equilibrium assemblies.
RESUMO
Molecular separations involving solvents and organic impurities represent great challenges for environmental and water-intensive industries. Novel materials with intrinsic nanoscale pores offer a great choice for improvement in terms of energy efficiency and capital costs. Particularly, in applications where gradient and ordered separation of organic contaminants remain elusive, smart materials with switchable pores can offer efficient solutions. Here, we report a hierarchically networked porous organic cage membrane with dynamic control over pores, elucidating stable solvent permeance and tunable dye rejection over different molecular weights. The engineered cage membrane can spontaneously modulate its geometry and pore size from water to methanol and DMF in a reversible manner. The cage membrane exhibits ≥585.59 g mol-1 molecular weight cutoff preferentially in water and is impeded by methanol (799.8 g mol-1) and DMF (≈1017 g mol-1), reflecting 36 and 73% change in rejection due to self-regulation and the flexible network, respectively. Grazing incidence X-ray diffraction illustrates a clear peak downshift, suggesting an intrinsic structural change when the cage membranes were immersed in methanol or DMF. We have observed reversible structural changes that can also be tuned by preparing a methanol/DMF mixture and adjusting their ratio, thereby enabling gradient molecular filtration. We anticipate that such cage membranes with dynamic selectivity could be promising particularly for industrial separations and wastewater treatment.
Assuntos
Metanol , Água , Solventes , Porosidade , Cromatografia LíquidaRESUMO
In this work, homochiral reduced imine cage was covalently bonded to the surface of the silica to prepare a novel high-performance liquid chromatography stationary phase, which was applied for the multiple separation modes such as normal phase, reversed-phase, ion exchange, and hydrophilic interaction chromatography. The successful preparation of the homochiral reduced imine cage bonded silica stationary phase was confirmed by performing a series of methods including X-ray photoelectron spectroscopy, thermogravimetric analysis, and infrared spectroscopy. From the extracted results of the chiral resolution in normal phase and reversed-phase modes, it was demonstrated that seven chiral compounds were successfully separated, among which the resolution of 1-phenylethanol reached the value of 3.97. Moreover, the multifunctional chromatographic performance of the new molecular cage stationary phase was systematically investigated in the modes of reversed-phase, ion exchange, and hydrophilic interaction chromatography for the separation and analysis of a total of 59 compounds in eight classes. This work demonstrated that the homochiral reduced imine cage not only achieved multiseparation modes and multiseparation functions performance with high stability, but also expanded the application of the organic molecular cage in the field of liquid chromatography.
RESUMO
Thin films with effective ion sieving ability are highly desired in energy storage and conversion devices, including batteries and fuel cells. However, it remains challenging to design and fabricate cost-effective and easy-to-process ultrathin films for this purpose. Here, we report a 300 nm-thick functional layer based on porous organic cages (POCs), a new class of porous molecular materials, for fast and selective ion transport. This solution processable material allows for the design of thin films with controllable thickness and tunable porosity by tailoring cage chemistry for selective ion separation. In the prototype, the functional layer assembled by CC3 can selectively sieve Li+ ions and efficiently suppress undesired polysulfides with minimal sacrifice for the system's total energy density. Separators modified with POC thin films enable batteries with good cycle performance and rate capability and offer an attractive path toward the development of future high-energy-density energy storage devices.
RESUMO
Chiral induction has been an important topic in chemistry, not only for its relevance in understanding the mysterious phenomenon of spontaneous symmetry breaking in nature but also due to its critical implications in medicine and the chiral industry. The induced chirality of fullerenes by host-guest interactions has been rarely reported, mainly attributed to their chiral resistance from high symmetry and challenges in their accessibility. Herein, we report two new pairs of chiral porous aromatic cages (PAC), R-PAC-2, S-PAC-2 (with Br substituents) and R-PAC-3, S-PAC-3 (with CH3 substituents) enantiomers. PAC-2, rather than PAC-3, achieves fullerene encapsulation and selective binding of C70 over C60 in fullerene carbon soot. More significantly, the occurrence of chiral induction between R-PAC-2, S-PAC-2 and fullerenes is confirmed by single-crystal X-ray diffraction and the intense CD signal within the absorption region of fullerenes. DFT calculations reveal the contribution of electrostatic effects originating from face-to-face arene-fullerene interactions dominate C70 selectivity and elucidate the substituent effect on fullerene encapsulation. The disturbance from the differential interactions between fullerene and surrounding chiral cages on the intrinsic highly symmetric electronic structure of fullerene could be the primary reason accounting for the induced chirality of fullerene.
RESUMO
We report a new composite material consisting of silver nanoparticles decorated with three-dimensional molecular organic cages based on light-absorbing porphyrins. The porphyrin cages serve to both stabilize the particles and allow diffusion and trapping of small molecules close to the metallic surface. Combining these two photoactive components results in a Fano-resonant interaction between the porphyrin Soret band and the nanoparticle-localised surface-plasmon resonance. Time-resolved spectroscopy revealed the silver nanoparticles transfer up to 37 % of their excited-state energy to the stabilising layer of porphyrin cages. These unusual photophysics cause a 2-fold current increase in photoelectrochemical water-splitting measurements. The composite structure provides a compelling proof of concept for advanced photosensitiser systems with intrinsic porosity for photocatalytic and sensing applications.
RESUMO
Electroreduction of CO2 into valuable fuels and feedstocks offers a promising way for CO2 utilization. However, the commercialization is limited by the low productivity. Here, we report a strategy to enhance the productivity of CO2 electroreduction by improving diffusion of CO2 to the surface of catalysts using porous organic cages (POCs) as an additive. It was noted that the Faradaic efficiency (FE) of C2+ products could reach 76.1 % with a current density of 1.7â A cm-2 when Cu-nanorod(nr)/CC3 (one of the POCs) was used, which were much higher than that using Cu-nr. Detailed studies demonstrated that the hydrophobic pores of CC3 can adsorb a large amount of CO2 for the reaction, and the diffusion of CO2 in the CC3 to the nanocatalyst surface is easier than that in the liquid electrolyte. Thus, more CO2 molecules make contact with the nanocatalysts in the presence of CC3, enhancing CO2 reduction and inhibiting generation of H2 .
RESUMO
Living systems use chemical fuels to transiently assemble functional structures. As a step toward constructing abiotic mimics of such structures, we herein describe dissipative formation of covalent basket cage CBC 5 by reversible imine condensation of cup-shaped aldehyde 2 (i.e., basket) with trivalent aromatic amine 4. This nanosized [4+4] cage (V=5â nm3 , Mw =6150â Da) has shape of a truncated tetrahedron with four baskets at its vertices and four aromatic amines forming the faces. Importantly, tris-aldehyde basket 2 and aliphatic tris-amine 7 undergo condensation to give small [1+1] cage 6. The imine metathesis of 6 and aromatic tris-amine 4 into CBC 5 was optimized to bias the equilibrium favouring 6. Addition of tribromoacetic acid (TBA) as a chemical fuel perturbs this equilibrium to result in the transient formation of CBC 5, with subsequent consumption of TBA via decarboxylation driving the system back to the starting state.
RESUMO
A solid-phase extraction cartridge was fabricated using diallyl isophthalate as the monomer with the addition of porous organic cage material via in situ free-radical polymerization in a stainless-steel column. The resulting monolithic adsorbent exhibited a relatively uniform porous structure, a high specific surface area of 113.98 m2 /g, and multiple functional chemical groups according to the characterization results. An online solid-phase extraction-high-performance liquid chromatography procedure was fabricated to extract and determine tussilagone from Farfarae Flos. The results show that the complex sample matrices can be removed in the solid-phase extraction procedure. Simultaneously, tussilagone can remain, which can be subsequently switched to an octadecylsilane bonded analytical column. The methodological validation showed that the correlation coefficient was 0.9999 with a linear range of 0.6-200.0 µg/mL, the limit of detection was 0.2 µg/mL, the limit of quantification was 0.6 µg/mL, accuracy was 100.3-100.6%, and relative standard deviation of precision was ≤1.9%. The present monolithic cartridge exhibits good reusability of not more than 100 times. The real sample of Farfarae Flos was determined with a tussilagone content of 0.74 mg/g.
Assuntos
Cromatografia Líquida de Alta Pressão/métodos , Medicamentos de Ervas Chinesas/química , Sesquiterpenos/análise , Extração em Fase Sólida/métodos , Limite de Detecção , Porosidade , Reprodutibilidade dos Testes , Sesquiterpenos/isolamento & purificação , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
We report the first experimental investigation of porous organic cages (POCs) for the demanding challenge of SO2 capture. Three structurally related N-containing cage molecular materials were studied. An imine-functionalized POC (CC3) showed modest and reversible SO2 capture, while a secondary-amine POC (RCC3) exhibited high but irreversible SO2 capture. A tertiary amine POC (6FT-RCC3) demonstrated very high SO2 capture (13.78â mmol g-1 ; 16.4 SO2 molecules per cage) combined with excellent reversibility for at least 50 adsorption-desorption cycles. The adsorption behavior was investigated by FTIR spectroscopy, 13 Câ CP-MAS NMR experiments, and computational calculations.
RESUMO
Imparting mesopores to organic cages of an intrinsic microporous nature to build up hierarchically porous cage soft materials is a grand challenge and will reshape the property and application scope of traditional organic cage molecules. Herein, we discovered how to engineer mesopores into microporous organic cages via their host-guest interactions with long chain ionic surfactants. Equally important, the ionic head of surfactants equips the supramolecularly assembled porous structures with charge-selective uptake and release function in solution. Interestingly, such hierarchically porous organic cage can serve as a nanoreactor once trapping enzymes within the cavity, which show 5-fold enhanced activity of enzymatic catalysis when compared with the free enzymes.
RESUMO
Porous liquids are a type of porous materials that engineer permanent porosity into unique flowing liquids, exhibiting promising functionalities for a variety of applications. Here a Typeâ I porous liquid is synthesized by transforming porous organic cages into porous ionic liquids via a supramolecular complexation strategy. Simple physical mixing of 18-crown-6 with task-specific anionic porous organic cages affords a porous ionic liquid with anionic porous organic cages as the anionic parts and 18-crown-6/potassium ion complexes as the cationic parts. In contrast, mixing of 15-crown-5 and anionic porous organic cages in a 2:1 ratio gives only solids, while the addition of excess 15-crown-5 affords a Typeâ II porous liquid. The permanent porosity in the cage-based porous liquids has been also confirmed by molecular simulation, positron (e+ ) annihilation lifetime spectroscopy, and enhanced gas sorption capacity compared with pure crown ethers.
RESUMO
We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient-wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO2 affinity were successfully encapsulated into the nanospace of Cr-based MIL-101 while retaining the crystal framework, morphology, and high stability of MIL-101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL-101, more affinity sites for CO2 are created in the resulting CB6@MIL-101 composites, leading to enhanced CO2 uptake capacity and CO2 /N2 , CO2 /CH4 separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.
RESUMO
Control of pore window size is the standard approach for tuning gas selectivity in porous solids. Here, we present the first example where this is translated into a molecular porous liquid formed from organic cage molecules. Reduction of the cage window size by chemical synthesis switches the selectivity from Xe-selective to CH4 -selective, which is understood using 129 Xe, 1 H, and pulsed-field gradient NMR spectroscopy.
RESUMO
We describe the a priori computational prediction and realization of multi-component cage pots, starting with molecular predictions based on candidate precursors through to crystal structure prediction and synthesis using robotic screening. The molecules were formed by the social self-sorting of a tri-topic aldehyde with both a tri-topic amine and di-topic amine, without using orthogonal reactivity or precursors of the same topicity. Crystal structure prediction suggested a rich polymorphic landscape, where there was an overall preference for chiral recognition to form heterochiral rather than homochiral packings, with heterochiral pairs being more likely to pack window-to-window to form two-component capsules. These crystal packing preferences were then observed in experimental crystal structures.
RESUMO
Porous organic cages composed of discrete cage molecules have attracted considerable recent attention as gas adsorption materials and separation media. In this study, we report a homochiral porous organic cage CC5 with a large cavity and pore windows as a novel stationary phase for high-resolution gas chromatographic separations. The capillary column was prepared by a static coating method. A large number of racemic compounds have been resolved on the coated capillary column, including derivatized amino acids, alcohols, alcohol amines, esters, ethers, ketones, and epoxides. It is interesting that the CC5-coated capillary column exhibits significant chiral recognition complementarity to a commercial ß-DEX 120 column and a previously reported homochiral porous organic cage CC3-R-coated column, which could expand the range of the analytes amenable to separation on porous organic cage-based capillary columns. Moreover, the fabricated column also shows excellent selectivity for the separation of positional isomers, including the challenging ethylbenzene and xylene isomers. Experimental results demonstrate an excellent separation performance and stability of the CC5-coated column, making it promising for gas chromatography applications.
RESUMO
A porous organic cage composed of six iron tetraphenylporphyrins was used as a supramolecular catalyst for electrochemical CO2 -to-CO conversion. This strategy enhances active site exposure and substrate diffusion relative to the monomeric catalyst, resulting in CO generation with near-quantitative Faradaic efficiency in pHâ 7.3 water, with activities reaching 55 250 turnovers. These results provide a starting point for the design of supramolecular catalysts that can exploit the properties of the surrounding matrix yet retain the tunability of the original molecular unit.
RESUMO
Using variable temperature 2 H static NMR spectra and 13 C spin-lattice relaxation times (T1 ), we show that two different porous organic cages with tubular architectures are ultra-fast molecular rotors. The central para-phenylene rings that frame the "windows" to the cage voids display very rapid rotational rates of the order of 1.2-8×106 â Hz at 230â K with low activation energy barriers in the 12-18â kJ mol-1 range. These cages act as hosts to iodine guest molecules, which dramatically slows down the rotational rates of the phenylene groups (5-10×104 â Hz at 230â K), demonstrating potential use in applications that require molecular capture and release.