Experimental Verification of the Pumping Effect Caused by the Micro-Tapered Hole in a Piezoelectric Atomizer.

In this study, we examined the use of a dynamic micro-tapered hole as a micro-scale tapered flow tube valveless piezoelectric pump. Firstly, we obtained photographs of a micro-tapered hole by using an environmental scanning electron microscope (ESEM). Then, we explained the pump effect of the micro-tapered hole, and derived the atomization rate equation. Furthermore, we reported an atomization rate measurement experiment that eliminated the atomization caused by a pressure increase, and demonstrated that a change in the volume of a micro-tapered hole could produce atomization. The experimental results indicate that, under the same voltage, the forward atomization rate is much higher than the reverse atomization rate and that the atomization rate increases with the micro-tapered hole volume. The experimental results show that the atomization of the micro-tapered aperture atomizer is caused by its pumping effect. Moreover, the flow resistance and volume of the micro-tapered hole can affect the atomization rate.

On the Effect of Thermophysical Properties of Clothing on the Heat Strain Predicted by PHS Model.

Procedures and equations reported in ISO 9920 for the correction of basic thermophysical clothing properties taking into account pumping effect and air movement are very different from those used by the Predicted Heat Strain (PHS) model in ISO 7933. To study the effect of these differences on the assessment of hot environments using the PHS model, an analysis focusing on the modelling of the dynamic thermal insulation and the vapour resistance of the clothing reported in ISO 9920 and ISO 7933 standards will be discussed in this paper. The results are useful evidence to start a discussion on the best practice for dealing with clothing thermophysical properties and underline the need to harmonize the entire set of standards in the field of the Ergonomics of the Thermal Environment. ISO 7933 is presently under revision.

Clothing resultant thermal insulation determined on a movable thermal manikin. Part II: effects of wind and body movement on local insulation.

Part II of this two-part series study was focused on examining the effects of wind and body movement on local clothing thermal insulation. Seventeen clothing ensembles with different layers (i.e., 1, 2, or 3 layers) were selected for this study. Local thermal insulation with different air velocities (0.15, 1.55, and 4.0 m/s) and walking speeds (0, 0.75, and 1.17 m/s) were investigated on a thermal manikin. Empirical equations for estimating local resultant clothing insulation as a function of local insulation, air velocity, and walking speed were developed. The results showed that the effects of wind and body movement on local resultant thermal resistance are complex and differ distinctively among different body parts. In general, the reductions of local insulation with wind at the chest, abdomen, and pelvis were greater than those at the lower leg and back, and the changes at the body extremity such as the forearm, thigh, and lower leg were higher than such immobile body parts as the chest and back. In addition, the wind effect interacted with the walking effect. This study may have important applications in human local thermal comfort modeling and functional clothing design.

Clothing resultant thermal insulation determined on a movable thermal manikin. Part I: effects of wind and body movement on total insulation.

In this serial study, 486 thermal manikin tests were carried out to examine the effects of air velocity and walking speed on both total and local clothing thermal insulations. Seventeen clothing ensembles with different layers (i.e., one, two, or three layers) were selected for the study. Three different wind speeds (0.15, 1.55, 4.0 m/s) and three levels of walking speed (0, 0.75, 1.2 m/s) were chosen. Thus, there are totally nine different testing conditions. The clothing total insulation and local clothing insulation at different body parts under those nine conditions were determined. In part I, empirical equations for estimating total resultant clothing insulation as a function of the static thermal insulation, relative air velocity, and walking speed were developed. In part II, the local thermal insulation of various garments was analyzed and correction equations on local resultant insulation for each body part were developed. This study provides critical database for potential applications in thermal comfort study, modeling of human thermal strain, and functional clothing design and engineering.

Enhancing Magnetic Damping under GaAs Band-Edge Photoexcitation in a Co2FeAl/n-GaAs Heterojunction.

The ultrafast manipulation of spin in ferromagnet-semiconductor (FM/SC) heterojunctions is a key issue for advancing spintronics, where magnetic damping and interfacial spin transport often define device efficiency. Leveraging selective optical excitation in semiconductors offers a unique approach to spin manipulation in FM/SC heterojunctions. Herein, we investigated the magnetic dynamics of a Co2FeAl/n-GaAs heterojunction using the time-resolved magneto-optical Kerr technique and observed the considerably enhanced magnetic damping of Co2FeAl when GaAs is photoexcited near its band edge. This enhancement is attributed to an enhanced spin-pumping effect facilitated by spin-dependent carrier tunneling and capture within the Co2FeAl layer. Moreover, circularly polarized light excites spin-polarized band-edge photocarriers, further impacting the magnetic damping of Co2FeAl through an additional optical spin-transfer torque on the magnetic moment of Co2FeAl. Our results provide a valuable reference for manipulating spin-pumping and interfacial spin transport in FM/SC heterojunctions, showcasing the advantage of optical control of semiconductor photocarriers for the ultrafast manipulation of magnetic dynamics and interfacial spin transfer.

Topically Applied Biopolymer-Based Tri-Layered Hierarchically Structured Nanofibrous Scaffold with a Self-Pumping Effect for Accelerated Full-Thickness Wound Healing in a Rat Model.

Wound healing has grown to be a significant problem at a global scale. The lack of multifunctionality in most wound dressing-based biopolymers prevents them from meeting all clinical requirements. Therefore, a multifunctional biopolymer-based tri-layered hierarchically nanofibrous scaffold in wound dressing can contribute to skin regeneration. In this study, a multifunctional antibacterial biopolymer-based tri-layered hierarchically nanofibrous scaffold comprising three layers was constructed. The bottom and the top layers contain hydrophilic silk fibroin (SF) and fish skin collagen (COL), respectively, for accelerated healing, interspersed with a middle layer of hydrophobic poly-3-hydroxybutyrate (PHB) containing amoxicillin (AMX) as an antibacterial drug. The advantageous physicochemical properties of the nanofibrous scaffold were estimated by SEM, FTIR, fluid uptake, contact angle, porosity, and mechanical properties. Moreover, the in vitro cytotoxicity and cell healing were assessed by MTT assay and the cell scratching method, respectively, and revealed excellent biocompatibility. The nanofibrous scaffold exhibited significant antimicrobial activity against multiple pathogenic bacteria. Furthermore, the in vivo wound healing and histological studies demonstrated complete wound healing in wounded rats on day 14, along with an increase in the expression level of the transforming growth factor-ß1 (TGF-ß1) and a decrease in the expression level of interleukin-6 (IL-6). The results revealed that the fabricated nanofibrous scaffold is a potent wound dressing scaffold, and significantly accelerates full-thickness wound healing in a rat model.

Gas-Liquid Mass Transfer Behavior of Upstream Pumping Mechanical Face Seals.

For gas-liquid medium isolation seals in aero-engines, the upstream pumping function of directional grooves provides an effective way to realize the design of longer service life and lower leakage rate. However, this produces a new problem for gas-liquid mass transfer in the sealing clearance. This study establishes an analytical model to investigate the gas-liquid mass transfer behavior and the change rule for the opening force of mechanical face seals with elliptical grooves. Compared with traditional studies, this model considers not only the gas-liquid transfer but also the cavitation effect. The results obtained show that with the increase of rotational speed, the gas medium transferred from the inner low-pressure side to the outer high-pressure side. In addition, the leakage rate of the liquid medium from the outer high-pressure side to the inner low-pressure side increased with the growth of sealing clearance, rotational speed and seal pressure. The upstream pumping effect of the gas medium with elliptical grooves not only led to a state of gas-liquid mixed lubrication in the sealing surfaces, but also significantly increased the opening capacity of the seal face. This research may provide a reasonable basis for the design of upstream pumping mechanical face seals.

The Application of the Nanofiltration Membrane NF270 for Separation of Fermentation Broths.

The potential for nanofiltration (NF) in removing both relatively low molecular weight (MW) organic species and charged solutes from complex media is noteworthy. The main aim of the current work was to improve understanding of the separation mechanisms of fermentation broths components in the NF process. For this purpose, the experimental investigations were performed using the commercial polyamide NF270 membrane. The feed solution was ultrafiltered 1,3-propanediol (1,3-PD) broths. The separation results were analyzed and discussed in light of the detailed characteristics of both the membrane and the broth components. It has been noted that the membrane ensured the complete 1,3-PD permeability and significant rejection of some feed components. A thorough analysis showed that the retention of carboxylic acids was based on both the Donnan effect and sieve mechanism, according to the following order: succinic acid > lactic acid > acetic acid > formic acid. Indeed, acids retention increased with increasing charged acids ions valency, Stokes radius (rS) as well as MW, and decreasing diffusion coefficient (D). In turn, for ions, the following orders retention was determined: SO42− = PO43− > Cl− and Ca2+ > Na+ > NH4+ ~ K+. It indicated that the ions retention increased with increasing ions charge density, hydrated radius (rH), and hydration energy (Eh). It showed that the separation of the ions was based on the Donnan exclusion, sieving effect, and dielectric exclusion.

Influence of meteorological conditions on explosive increase in O3 concentration in troposphere.

Ozone (O3) pollution in the troposphere, especially at the surface layer, has become a focus of attention in recent years. High O3 concentration events tend to occur frequently in north China, Yangtze, the Pearl River Delta, and the Sichuan Basin, among others. Studies on the meteorological contribution to O3 in the troposphere have become a new direction for the scientific community. This research intends to explore how meteorological conditions contribute to O3 pollution in all seasons on the basis of further studies of the PLAM index. Our findings are as follows. (1) In pollution-sensitive areas, following a height uplift in the pollution mixing layer (H_PML), NO2 concentration decreases initially, followed by an explosive increase (EI) in O3 concentration after sunrise. (2) This process varies significantly by season and area. (3) According to an analysis of the meteorological conditions causing rises in O3 concentration within a few hours after sunrise, the initial decrease-subsequent increase in NO2 versus O3 concentration satisfies the law of exponent power rule, according to which seasonal and regional differences in coastal and inland areas depend on coefficients α and ß. The explosive increase in O3 concentration, decrease in NO2 concentration, and characteristics of their diurnal cycles are also discussed. (4) Under the meteorological condition of static stability, below the static and stable cover, the H_PML of the polluted mixed layer consistently indicates the reciprocating cycle of day uplift and night pressure. The effect of air pump suction on the pollutant is an important mechanism of large-scale pollution in the study area under the condition of static and stable cover. (5) The influencing mechanism of meteorological conditions in the diurnal H_PML cycle aids in improving the understanding of O3 concentration increases in the troposphere.