Comparison of LC-MS-based methods for the determination of carboxylic acids in animal matrices.

Carboxylic acids (CAs) are key players in human and animal metabolism. As they are hardly retained under reversed-phase liquid chromatography (RP-LC) conditions in their native form, derivatization is an option to make them accessible to RP-LC and simultaneously increase their response for mass spectrometric detection. In this work, two RP-LC tandem mass spectrometry-based methods using aniline or 3-nitrophenylhydrazine (3-NPH) as derivatization agents were compared with respect to several factors including completeness of derivatization, apparent recoveries (RAs) in both cow feces and ruminal fluid, and concentrations obtained in feces and ruminal fluid of cows. Anion exchange chromatography coupled to high-resolution mass spectrometry (AIC-HR-MS) served as reference method. Derivatization efficiencies were close to 100% for 3-NPH derivatization but variable (20-100%) and different in solvent solutions and matrix extracts for aniline derivatization. Likewise, average RAs of 13C-labeled short-chain fatty acids as internal standards were around 100% for 3-NPH derivatization but only 45% for aniline derivatization. Quantification of CAs in feces and ruminal fluid of cows initially fed a forage-only diet and then transitioned to a 65% high-grain diet which yielded similar concentrations for 3-NPH derivatization and AIC-HR-MS, but concentrations determined by aniline derivatization were on average five times lower. For these reasons, derivatization with aniline is not recommended for the quantitative analysis of CAs in animal samples.

Cross-column density functional theory-based quantitative structure-retention relationship model development powered by machine learning.

Quantitative structure-retention relationship (QSRR) modeling has emerged as an efficient alternative to predict analyte retention times using molecular descriptors. However, most reported QSRR models are column-specific, requiring separate models for each high-performance liquid chromatography (HPLC) system. This study evaluates the potential of machine learning (ML) algorithms and quantum mechanical (QM) descriptors to develop QSRR models that can predict retention times across three different reversed-phase HPLC columns under varying conditions. Four machine learning methods-partial least squares (PLS) regression, ridge regression (RR), random forest (RF), and gradient boosting (GB)-were compared on a dataset of 360 retention times for 15 aromatic analytes. Molecular descriptors were calculated using density functional theory (DFT). Column characteristics like particle size and pore size and experimental conditions like temperature and gradient time were additionally used as descriptors. Results showed that the GB-QSRR model demonstrated the best predictive performance, with Q2 of 0.989 and root mean square error of prediction (RMSEP) of 0.749 min on the test set. Feature analysis revealed that solvation energy (SE), HOMO-LUMO energy gap (∆E HOMO-LUMO), total dipole moment (Mtot), and global hardness (η) are among the most influential predictors for retention time prediction, indicating the significance of electrostatic interactions and hydrophobicity. Our findings underscore the efficiency of ensemble methods, GB and RF models employing non-linear learners, in capturing local variations in retention times across diverse experimental setups. This study emphasizes the potential of cross-column QSRR modeling and highlights the utility of ML models in optimizing chromatographic analysis.

Rapid analysis of wheat gluten composition using a triple ELISA.

BACKGROUND: Gluten composition is an important quality parameter of wheat flour. Reversed-phase high-performance liquid chromatography (RP-HPLC) is a state-of-the-art method for its analysis. As this is a very labour-intensive and time-consuming procedure, alternative faster methods are desirable. Enzyme-linked immunosorbent assay (ELISA) is a high-throughput method often used for the analysis of gluten traces in gluten-free products. In this proof-of-principle study, we introduce an experimental triple ELISA for the relative quantitation of gliadins, high-molecular-weight glutenin subunits (HMW-GS) and low-molecular-weight glutenin subunits (LMW-GS) of one wheat flour extract. RESULTS: The results of 80 common wheat flour samples obtained from the triple ELISA and RP-HPLC were correlated. The results for gliadins (r = 0.69) and HMW-GS (r = 0.81) showed a medium and high correlation, respectively. Only a very weak correlation of ELISA and RP-HPLC results was observed for LMW-GS (r = 0.49). Results for glutenins (r = 0.69) and gluten (r = 0.72) had a medium correlation. The gliadin/glutenin ratio (r = 0.47) and LMW-GS/HMW-GS ratio (r = 0.40) showed a weak or no correlation. The gliadin, LMW-GS and gluten contents were lower and the HMW-GS content was higher in the ELISA measurement compared to RP-HPLC. CONCLUSION: The quantitation of gliadins and HMW-GS by the experimental triple ELISA showed comparable results to RP-HPLC, whereas no strong correlation between the results from the two methods was found for LMW-GS. Overall, the experimental triple ELISA is suitable for relative gluten quantitation, especially for the analysis of large sample sets. Further work will focus on improving the experimental procedure of the ELISA. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Chromatographic separation of glycated peptide isomers derived from glucose and fructose.

Amino groups in proteins can react with aldehyde groups in aldoses or keto groups in ketoses, e.g., D-glucose and D-fructose, yielding Schiff bases that rearrange to more stable Amadori and Heyns products, respectively. Analytical strategies to identify and quantify each glycation product in the presence of the corresponding isomer are challenged by similar physicochemical properties, impeding chromatographic separations, and by identical masses including very similar fragmentation patterns in tandem mass spectrometry. Thus, we studied the separation of seven peptide families, each consisting of unmodified, glucated, and fructated 15mer to 22mer peptides using reversed-phase (RP) and hydrophilic interaction chromatography (HILIC). In RP-HPLC using acidic acetonitrile gradients, unglycated peptides eluted ~ 0.1 to 0.8 min after the corresponding glycated peptides with four of seven peptides being baseline separated. Isomeric glucated and fructated peptides typically coeluted, although two late-eluting peptides were partially separated. Neutral eluents (pH 7.2) improved the chromatographic resolution (Rs), especially in the presence of phosphate, providing good and often even baseline separations for six of the seven isomeric glycated peptide pairs with fructated peptides eluting earlier (Rs = 0.7 to 1.5). Some glucated and unmodified peptides coeluted, but they can be distinguished by mass spectrometry. HILIC separated glycated and unmodified peptides well, whereas glucated and fructated peptides typically coeluted. In conclusion, HILIC efficiently separated unmodified and the corresponding glycated peptides, while isomeric Amadori and Heyns peptides were best separated by RP-HPLC using phosphate buffered eluents.

Reversed-phase high-performance liquid chromatography: A fast and efficient analytical method to quantify docetaxel-loaded pegylated liposomes in release study.

Docetaxel is an anticancer that belongs to the family of taxanes and acts in the inhibition of cell proliferation through the polymerization of microtubules. The aim of this study was the development and validation of a fast method by reversed-phase high-performance liquid chromatography for quantitative analysis of docetaxel encapsulated in pegylated liposomes. The analytical method was validated for the following recognized specifications: system suitability, precision (repeatability and intermediate precision), linearity, accuracy, selectivity, detection and quantification limits, and robustness. The reversed phase-high-performance liquid chromatography analyses were performed at a temperature of 45°C (isocratic mode). The mobile phase was composed of acetonitrile and water (65:35, v/v) and the flow rate was fixed at 0.8 mL/min. The running time and wavelength were 8 min and 230 nm, respectively. The method was found to be linear, precise, selective, precise, robust, accurate, in the range of 1-75 µg/mL (R2 = 0.9999) and the values of detection and quantification limits were 2.35 and 7.84 µg/mL, respectively. The release rates of docetaxel in pegylated liposomes were lower compared to docetaxel in solution. The reversed phase high-performance liquid chromatography method developed proved to be adequate and can be effectively used to determine the in vitro release profile of docetaxel transported by pegylated liposomes.

Determination of adenine nucleotides by the modified method of high-performance liquid chromatography.

Adenine nucleotides (ATP, ADP and AMP) play a central role in the regulation of metabolism and energy: they provide the energy balance of the cell, determine its redox state, act as allosteric effectors of a number of enzymes, modulate signaling and transcription factors and activate oxidation or biosynthesis substrates. A large number of methods have been developed to determine the level of ATP, ADP and AMP, but the most universal and effective method for the separation and analysis of complex mixtures is the reversed-phase high-performance liquid chromatography method (RP-HPLC). The aim of this study is to determine the optimal conditions for the qualitative separation and quantitative determination of standard solutions of ATP (1 mmol/l), ADP (0,5 mmol/l) and AMP (0,1 mmol/l) by RP-HPLC. The degree of separation of adenine nucleotides was estimated by the time of peak output in the chromatogram. To achieve the goal, the following tasks were set: assess the effect of the temperature of the analysis on the separation and change of the release time of the analytes in the chromatogram; determine the most optimal composition of the mobile phase for the separation of ATP, ADP and AMP in the chromatogram (the content of the organic solvent in the solution); to identify the effect of pH of the mobile phase on the separation of standard solutions of adenine nucleotides; set the optimal molarity of the mobile phase for the separation of ATP, ADP and AMP in the chromatogram. It was found that the temperature of the analysis does not affect the quality of peak separation, while the composition and pH of the mobile phase have a significant effect on the complete and clear separation of the studied nucleotides in the chromatogram. It was determined that the analysis temperature of 37°C and the mobile phase of 0.05 M KH2PO4 (pH 6.0) are optimal for separating the peaks of adenine nucleotides.

Development of an ultra-high-performance liquid chromatography-charged aerosol detection/UV method for the quantitation of linear polyethylenimines in oligonucleotide polyplexes.

Linear polyethylenimines are polycationic excipients that have found many pharmaceutical applications, including as a delivery vehicle for gene therapy through formation of polyplexes with oligonucleotides. Accurate quantitation of linear polyethylenimines in both starting solution and formulation containing oligonucleotide/polyethylenimine polyplexes is critical. Existing methods using spectroscopy, matrix-assisted laser desorption/ionization mass spectrometry time-of-flight, or nuclear magnetic resonance are either complex or suffer from low selectivity. Here, the development and performance of a simple analytical method is described whereby linear polyethylenimines are resolved by ultra-high-performance liquid chromatography and quantified using either a charged aerosol detector or an ultraviolet detector. For formulated oligonucleotide/polyethylenimine polyplexes, sample preparation through decomplexation/digestion by trifluoroacetic acid was necessary to eliminate separation interference. The method can be used not only to support formulation development but also to monitor the synthesis/purification and characterization of linear polyethylenimines.

Prediction of Chromatographic Elution Order of Analytical Mixtures Based on Quantitative Structure-Retention Relationships and Multi-Objective Optimization.

Prediction of the retention time from the molecular structure using quantitative structure-retention relationships is a powerful tool for the development of methods in reversed-phase HPLC. However, its fundamental limitation lies in the fact that low error in the prediction of the retention time does not necessarily guarantee a prediction of the elution order. Here, we propose a new method for the prediction of the elution order from quantitative structure-retention relationships using multi-objective optimization. Two case studies were evaluated: (i) separation of organic molecules in a Supelcosil LC-18 column, and (ii) separation of peptides in seven columns under varying conditions. Results have shown that, when compared to predictions based on the conventional model, the relative root mean square error of the elution order decreases by 48.84%, while the relative root mean square error of the retention time increases by 4.22% on average across both case studies. The predictive ability in terms of both retention time and elution order and the corresponding applicability domains were defined. The models were deemed stable and robust with few to no structural outliers.

Domain-specific free thiol variant characterization of an IgG1 by reversed-phase high-performance liquid chromatography mass spectrometry.

Measurement of free thiols in antibody therapeutics is important for product development and assessment of critical quality attributes. Earlier studies demonstrated fast separation of free thiol variants of IgG1 using reversed-phase high performance liquid chromatography (RP-HPLC) with diphenyl resin. Here, we report using N-tert-butylmaleimide (NtBM) alkylation followed by RP-HPLC and online mass spectrometry for rapid total and domain-specific free thiol characterization of IgG1. By increasing hydrophobicity, NtBM alkylation improves separation of free thiol variants from disulfide-linked main peak species. The unique mass shift by NtBM alkylation offers unambiguous characterization of free thiol variants by online mass spectrometry. Variant peaks separated by RP-HPLC were antibody molecules containing two NtBM-alkylated cysteines, corresponding to IgG1 containing two free thiols before alkylation. Further characterization of the collected fractions of variants by peptide mapping revealed that each variant contained unpaired cysteines located in specific IgG1 domains (CH1, CH3, VH and VL domains). Total molecular-level and domain-specific free thiol content measured by this method correlate well with orthogonal differential alkylation peptide mapping analysis, which measures free thiol level at individual cysteine residues. This method provides high throughput quantitation of total and domain-specific free thiol content in IgG1 molecules, facilitating rapid, comprehensive product and manufacturing process characterization.

Physicochemical stability of carfilzomib (Kyprolis®) containing solutions in glass vials, ready-to-administer plastic syringes and infusion bags over a 28-day storage period.

Centralized aseptic preparation of ready-to-administer carfilzomib containing parenteral solutions in plastic syringes and polyolefine (PO) infusion bags needs profound knowledge about the physicochemical stability in order to determine the beyond-use-date of the preparations. Therefore, the purpose of this study was to determine the physicochemical stability of carfilzomib solution marketed as Kyprolis® powder for solution for infusion. Reconstituted solutions and ready-to-administer preparations of Kyprolis® stored under refrigeration (2-8℃) or at room temperature (25℃) were analyzed at predetermined intervals over a maximum storage period of 28 days. Chemical stability of carfilzomib was planned to be determined with a stability-indicating reversed-phase high-performance liquid chromatography assay. Physicochemical stability was planned to be determined by visual inspection of clarity and color as well as pH measurement. The study results show that reconstituted carfilzomib containing parenteral solutions are stable in glass vials as well as diluted solutions in plastic syringes and PO infusion bags over a period of at least 28 days when stored light protected under refrigeration. When stored at room temperature, reconstituted and diluted carfilzomib solutions are physicochemically stable over 14 days and 10 days, respectively. The physicochemical stability of carfilzomib infusion solutions allows cost-saving pharmacy-based centralized preparation of ready-to-administer preparations.

Resonance Rayleigh scattering technique as a detection method for the RP-HPLC determination of local anaesthetics in human urine.

A highly selective and sensitive method of reversed phase high-performance liquid chromatography (RP-HPLC) coupled with resonance Rayleigh scattering (RRS) was developed for the determination of procaine, bupivacaine and tetracaine. Separation of three local anaesthetics was achieved at 35 °C on a C18 column. The mobile phase was 30: 70 (v/v) acetonitrile/triethylamine-phosphoric acid buffer (pH 2.9) at flow rate of 0.3 mL/min. The RRS detection was conducted by taking advantage of the strong RRS enhancement of the local anaesthetics with erythrosine reaction in an acidic medium. Under optimum conditions, the limit of detection (S/N = 3) values were in the range of 2.4-11.2 ng/mL. Recoveries from spiked human urine samples were 95.8%-104.5%. The proposed method applied to the determination of local anaesthetics in human urine achieved satisfactory results. In addition, the mechanism of the reaction is fully discussed. Copyright © 2016 John Wiley & Sons, Ltd.

Reversed-phase ion-pair high-performance liquid chromatography assay of polyprenyl diphosphate oligomer homologues.

A reversed-phase ion-pair high-performance liquid chromatography procedure was developed for the separation of polyprenyl diphosphate oligomer homologues obtained chemically from plant polyprenols. Tetrabutylammonium phosphate was used as the ion-pair reagent, and the dependence of the separation quality on pH of ion-pair reagent was investigated for the first time. The procedure is applicable for the control of commercial available polyprenyl monophosphates (the active components of veterinary drugs Phosprenyl and Gamapren) for the possible presence of polyprenyl diphosphate byproducts.

New potential humic acid stationary phase toward drug components: Development of a chemometric-assisted RP-HPLC method for the determination of paracetamol and caffeine in tablet formulations.

A new humic acid based stationary phase has been used, for the first time, to achieve the separation and quantification of paracetamol and caffeine in pharmaceutical preparations under reversed-phase high-performance liquid chromatography conditions. Central composite design was applied as a powerful tool to optimize the most dominant parameters that influence the resolution of reversed-phase high-performance liquid chromatography, that is, mobile phase composition (acetonitrile percentage in water), flow rate, and column temperature. The optimum conditions were obtained as 21.69%, 1.5 mL/min, and 15°C, respectively, with the aid of a second-order quadratic model and desirability function. Under the optimum conditions, the peaks could be baseline separated within 10 min. For the developed reversed-phase high-performance liquid chromatography method, the linearity was investigated in the concentration ranges of 2-160 mg/mL (R(2) = 0.999) for paracetamol and 2-9.9 mg/mL (R(2) = 0.991) for caffeine. Mean recoveries for paracetamol and caffeine were 95.90 and 95.68%, respectively. The limits of detection and quantification were 4.1 × 10(-4) and 1.3 × 10(-3) mg/mL for paracetamol and 1.6 × 10(-4) and 5.0 × 10(-4) mg/mL for caffeine. The results showed that the new humic acid based stationary phase is very suitable for the separation of paracetamol and caffeine in pharmaceutical preparations and, thus it can be used effectively in the pharmaceutical industry.

Loading, release and stability of epirubicin-loaded drug-eluting beads.

PURPOSE: The aim of this study was to determine the loading efficiency, physico-chemical stability and release of epirubicin-loaded DC Bead™ (Biocompatibles UK Ltd, a BTG International group company) (bead size 70-150 µm (=DC BeadM1™) and 100-300 µm) after loading with epirubicin solution (2 mg/ml) or reconstituted powder formulation (25 mg/ml) and controlled storage. METHODS: DC Bead™ were loaded with 76 mg epirubicin solution (Epimedac™, Medac GmbH) or 75 mg epirubicin powder formulation (Farmorubicin™, Pharmacia Pfizer GmbH) per 2 ml of beads. Drug loading efficiency and stability were determined by measuring the epirubicin concentration in the excess solution after predetermined intervals (maximum 24 h) and different agitation conditions.Syringes with loaded beads were stored protected from light at room temperature. At predetermined intervals the beads were transferred into 200 ml phosphate buffered solution (pH 7.2) as elution medium and stirred automatically for 2 h not followed or followed by addition of 200 ml of 20% sodium chloride (=NaCl) solution and stirred for another 2 h to analyse the drug release and integrity of the epirubicin-loaded beads. Elution experiments were performed and samples taken periodically over a four-week period (day 0, 7, 14 and 28). A reversed-phase high-performance liquid chromatography assay with ultraviolet detection was utilized to analyse the concentration and purity of epirubicin. RESULTS: The loading procedure for DC Bead™ with epirubicin drug solutions resulted in a loading percentage of 95-99% within 6 h dependent on the bead size, epirubicin concentration in the loading solution and loading conditions. Loading levels remained stable and no epirubicin degradation products were observed over the period of 28 days, while the loaded beads were stored light protected at room temperature.Release of epirubicin into 200 ml phosphate buffered solution elution medium and additionally followed by release into the admixture with 200 ml 20% NaCl solution amounted to 5% and about 20% of the loaded epirubicin, respectively. Integrity of loaded epirubicin was proven over 28 days. CONCLUSIONS: Epirubicin can be loaded into DC Bead™ of different sizes using the epirubicin powder formulation (25 mg/ml) or epirubicin injection concentrate (2 mg/ml). Physico-chemical stability is maintained over a period of at least 28 days when stored light protected at room temperature. Elution of epirubicin is dependent on the volume and cation exchange capacity of the elution medium.

Resolution and isolation of enantiomers of (±)-isoxsuprine using thin silica gel layers impregnated with L-glutamic acid, comparison of separation of its diastereomers prepared with chiral derivatizing reagents having L-amino acids as chiral auxiliaries.

Thin silica gel layers impregnated with optically pure l-glutamic acid were used for direct resolution of enantiomers of (±)-isoxsuprine in their native form. Three chiral derivatizing reagents, based on DFDNB moiety, were synthesized having l-alanine, l-valine and S-benzyl-l-cysteine as chiral auxiliaries. These were used to prepare diastereomers under microwave irradiation and conventional heating. The diastereomers were separated by reversed-phase high-performance liquid chromatography on a C18 column with detection at 340 nm using gradient elution with mobile phase containing aqueous trifluoroacetic acid and acetonitrile in different compositions and by thin-layer chromatography (TLC) on reversed phase (RP) C18 plates. Diastereomers prepared with enantiomerically pure (+)-isoxsuprine were used as standards for the determination of the elution order of diastereomers of (±)-isoxsuprine. The elution order in the experimental study of RP-TLC and RP-HPLC supported the developed optimized structures of diastereomers based on density functional theory. The limit of detection was 0.1-0.09 µg/mL in TLC while it was in the range of 22-23 pg/mL in HPLC and 11-13 ng/mL in RP-TLC for each enantiomer. The conditions of derivatization and chromatographic separation were optimized. The method was validated for accuracy, precision, limit of detection and limit of quantification.

Determination of amatoxins and phallotoxins in Amanita phalloides mushrooms from northeastern Portugal by HPLC-DAD-MS.

Amanita phalloides is a toxic mushroom responsible for the majority of deaths occurring after mushrooms ingestion, mainly due to amatoxins. In the present study the contents and distribution of the major amatoxins and phallotoxins in different tissues of A. phalloides from two different sites of Portugal were analyzed by liquid chromatography (LC) coupled to diode array (DAD) and mass spectrometry (MS) detection. The main toxins were separated by LC and its chemical structures confirmed by MS. α-Amanitin contents in caps, stipe and volva tissues were quantified by RP-HPLC. The results show that caps have the highest content of amatoxins, whereas the volva was richest in phallotoxins. Moreover variability in the toxins composition from different geographic sites was also observed. This study provides for the first time the content of toxins in A. phalloides from Portugal.

Stability indicating RP-HPLC method development and validation for the simultaneous determination of aminexil and minoxidil in pharmaceutical dosage form.

The objective of the present work is to develop stability indicating high-performance liquid chromatographic method for the simultaneous determination of aminexil and minoxidil in pharmaceutical dosage form. The chromatographic separation was achieved with BDS Hypersil C18 column (250 mm×4.6 mm×5 µ) as stationary phase and phosphate buffer and acetonitrile (78:22) as mobile phase. The method was employed by using a flow rate of 1.1 mL/min kept at 30°C. The detection wavelength was kept at 238 nm by using photo-diode array detector. The retention times of the aminexil and minoxidil were found to be 2.3 min and 3.9 min, respectively. The method developed was validated in accordance with ICH guidelines with respect to the stability indicating capacity of the method including system suitability, accuracy, precision, linearity, range, limit of detection, limit of quantification and robustness. The linearity responses of aminexil and minoxidil were found to be in the concentration ranges of 18.75-112.5 µg/mL and 25-150 µg/mL, respectively. The LOD and LOQ values for aminexil were found to be 0.31 and 0.92 µg/mL and minoxidil were found to be 0.03 and 0.10 µg/mL respectively. The percentage recoveries for both the drugs were found in the range of 98-101%. This method is accurate, precise and sensitive; hence, it can be employed for routine quality control of aminexil and minoxidil in pharmaceutical industries and drug testing laboratories.

Prediction of the retention of s-triazines in reversed-phase high-performance liquid chromatography under linear gradient-elution conditions.

In this paper, a multilayer artificial neural network is used to model simultaneously the effect of solute structure and eluent concentration profile on the retention of s-triazines in reversed-phase high-performance liquid chromatography under linear gradient elution. The retention data of 24 triazines, including common herbicides and their metabolites, are collected under 13 different elution modes, covering the following experimental domain: starting acetonitrile volume fraction ranging between 40 and 60% and gradient slope ranging between 0 and 1% acetonitrile/min. The gradient parameters together with five selected molecular descriptors, identified by quantitative structure-retention relationship modelling applied to individual separation conditions, are the network inputs. Predictive performance of this model is evaluated on six external triazines and four unseen separation conditions. For comparison, retention of triazines is modelled by both quantitative structure-retention relationships and response surface methodology, which describe separately the effect of molecular structure and gradient parameters on the retention. Although applied to a wider variable domain, the network provides a performance comparable to that of the above "local" models and retention times of triazines are modelled with accuracy generally better than 7%.

Analysis of normal and modified nucleosides in urine samples by high-performance liquid chromatography with different stationary phases.

The main aim of the present work was to study the retention behavior and quantification of nine nucleosides with the use of octadecyl, alkylamide, cholesterol and alkyl-phosphate stationary phases. The influence of organic solvent and buffer concentration on the separation of these compounds was under investigation. The retention factor had the highest values for the octadecyl and cholesterol packing materials. Complete separation of all the studied nucleosides was achieved in case of cholesterol stationary phase. The optimized separation method was applied for the quantification of nucleosides in the urine samples. Calibration plots showed good linearity (R(2) > 0.999) and the limits of detection were in a range of 0.3-0.5 µg/mL, while the limits of quantitation were >0.9 µg/mL. Accuracy was in the range of 5-11%.

Liquid chromatographic enantioseparation of (RS)-mexiletine and (RS)-fluoxetine using chiral derivatizing reagents synthesized with (S)-naproxen moiety.

Enantiomeric separation of racemic mexiletine and fluoxetine was achieved using three chiral derivatizing reagents (CDRs) based on (S)-naproxen. Diastereomers were synthesized by reaction of mexiletine or fluoxetine with the CDRs and were separated on a C18 column under reversed-phase conditions using a binary mixture of acetonitrile and triethylammonium phosphate/water, with UV detection at 230 and 226 nm. The results obtained for enantioseparation of the two drugs using the three CDRs were compiled and compared. The conditions for derivatization and chromatographic separation were optimized. The method was validated for linearity, repeatability, limit of detection and limit of quantification.