Surface-assisted laser desorption/ionization mass spectrometry imaging: A review.

In the last decades, surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) has attracted increasing interest due to its unique capabilities, achievable through the nanostructured substrates used to promote the analyte desorption/ionization. While the most widely recognized asset of SALDI-MS is the untargeted analysis of small molecules, this technique also offers the possibility of targeted approaches. In particular, the implementation of SALDI-MS imaging (SALDI-MSI), which is the focus of this review, opens up new opportunities. After a brief discussion of the nomenclature and the fundamental mechanisms associated with this technique, which are still highly controversial, the analytical strategies to perform SALDI-MSI are extensively discussed. Emphasis is placed on the sample preparation but also on the selection of the nanosubstrate (in terms of chemical composition and morphology) as well as its functionalization possibilities for the selective analysis of specific compounds in targeted approaches. Subsequently, some selected applications of SALDI-MSI in various fields (i.e., biomedical, biological, environmental, and forensic) are presented. The strengths and the remaining limitations of SALDI-MSI are finally summarized in the conclusion and some perspectives of this technique, which has a bright future, are proposed in this section.

Single-Walled Carbon Nanohorns as Boosting Surface for the Analysis of Low-Molecular-Weight Compounds by SALDI-MS.

Limits of Matrix-Assisted Laser Desorption Ionization (MALDI) mass spectrometry (MS) in the study of small molecules are due to matrix-related interfering species in the low m/z range. Single-walled carbon nanohorns (SWCNH) were here evaluated as a specific surface for the rapid analysis of amino acids and lipids by Surface-Assisted Laser Desorption Ionization (SALDI). The method was optimized for detecting twenty amino acids, mainly present as cationized species, with the [M+K]+ response generally 2-time larger than the [M+Na]+ one. The [M+Na]+/[M+K]+ signals ratio was tentatively correlated with the molecular weight, dipole moment and binding affinity, to describe the amino acids' coordination ability. The SWCNH-based surface was also tested for analyzing triglycerides in olive oil samples, showing promising results in determining the percentage composition of fatty acids without any sample treatment. Results indicated that SWCNH is a promising substrate for the SALDI-MS analysis of low molecular weight compounds with different polarities, enlarging the analytical platforms for MALDI applications.

SALDI Substrate-Based FeNi Magnetic Alloy Nanoparticles for Forensic Analysis of Poisons in Human Serum.

In this study, FeNi magnetic alloy nanoparticles (MANPs) were employed for the forensic analysis of four poisons-dimethametryn, napropamide, thiodicarb, and strychnine-using surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). FeNi MANPs were prepared via coprecipitation using two reducing agents, sodium borohydride (NaBH4) and hydrazine monohydrate (N2H4·H2O), to optimize the prepared MANPs and investigate their effect on the performance of SALDI-MS analysis. Thereafter, SALDI-MS analysis was carried out for the detection of three pesticides and a rodenticide. The prepared substrate offered sensitive detection of the targeted analytes with LOD values of 1 ng/mL, 100 pg/mL, 10 ng/mL, and 200 ng/mL for dimethametryn, napropamide, thiodicarb, and strychnine, respectively. The relative standard deviation (%RSD) values were in the range of 2.30-13.97% for the pesticides and 15-23.81% for strychnine, demonstrating the good spot-to-spot reproducibility of the FeNi substrate. Finally, the MANPs were successfully employed in the analysis of poison-spiked blood serum using a minute quantity of the sample with an LOD of 700 ng/mL dimethametryn and napropamide, 800 ng/mL thiodicarb, and 500 ng/mL strychnine. This study has great potential regarding the analysis of several poisons that may be found in human serum, which is significant in cases of self-harm.

Dual-polarity SALDI FT-ICR MS imaging and Kendrick mass defect data filtering for lipid analysis.

Lipids are biomolecules of crucial importance involved in critical biological functions. Yet, lipid content determination using mass spectrometry is still challenging due to their rich structural diversity. Preferential ionisation of the different lipid species in the positive or negative polarity is common, especially when using soft ionisation mass spectrometry techniques. Here, we demonstrate the potency of a dual-polarity approach using surface-assisted laser desorption/ionisation coupled to Fourier transform-ion cyclotron resonance (SALDI FT-ICR) mass spectrometry imaging (MSI) combined with Kendrick mass defect data filtering to (i) identify the lipids detected in both polarities from the same tissue section and (ii) show the complementarity of the dual-polarity data, both regarding the lipid coverage and the spatial distributions of the various lipids. For this purpose, we imaged the same mouse brain section in the positive and negative ionisation modes, on alternate pixels, in a SALDI FT-ICR MS imaging approach using gold nanoparticles (AuNPs) as dual-polarity nanosubstrates. Our study demonstrates, for the first time, the feasibility of (i) a dual-polarity SALDI-MSI approach on the same tissue section, (ii) using AuNPs as nanosubstrates combined with a FT-ICR mass analyser and (iii) the Kendrick mass defect data filtering applied to SALDI-MSI data. In particular, we show the complementarity in the lipids detected both in a given ionisation mode and in the two different ionisation modes. Graphical abstract.

Utilizing AgNPt-SALDI to Classify Edible Oils by Multivariate Statistics of Triacylglycerol Profile.

Edible oils are valuable sources of nutrients, and their classification is necessary to ensure high quality, which is essential to food safety. This study reports the establishment of a rapid and straightforward SALDI-TOF MS platform used to detect triacylglycerol (TAG) in various edible oils. Silver nanoplates (AgNPts) were used to optimize the SALDI samples for high sensitivity and reproducibility of TAG signals. TAG fingerprints were combined with multivariate statistics to identify the critical features of edible oil discrimination. Eleven various edible oils were discriminated using principal component analysis (PCA). The results suggested the creation of a robust platform that can examine food adulteration and food fraud, potentially ensuring high-quality foods and agricultural products.

DIUTHAME enables matrix-free mass spectrometry imaging of frozen tissue sections.

RATIONALE: A recently developed matrix-free laser desorption/ionization method, DIUTHAME (desorption ionization using through-hole alumina membrane), was examined for the feasibility of mass spectrometry imaging (MSI) applied to frozen tissue sections. The permeation behavior of DIUTHAME is potentially useful for MSI as positional information may not be distorted during the extraction of analytes from a sample. METHODS: The through-hole porous alumina membranes used in the DIUTHAME chips were fabricated by wet anodization, were 5 µm thick, and had the desired values of 200 nm through-hole diameter and 50% open aperture ratio. Mouse brain frozen tissue sections on indium tin oxide (ITO)-coated slides were covered using the DIUTHAME chips and were subjected to MSI experiments in commercial time-of-flight mass spectrometers equipped with solid-state UV lasers after thawing and drying without matrix application. RESULT: Mass spectra and mass images were successfully obtained from the frozen tissue sections using DIUTHAME as the ionization method. The mass spectra contained rich peaks in the phospholipid mass range free from the chemical background owing to there being no matrix-derived peaks in that range. DIUTHAME-MSI delivered high-quality mass images that reflected the anatomy of the brain tissue. CONCLUSIONS: Analytes can be extracted from frozen tissue by capillary action of the through-holes in DIUTHAME and moisture contained in the tissue without distorting positional information of the analytes. The sample preparation for frozen tissue sections in DIUTHAME-MSI is simple, requiring no specialized skills or dedicated apparatus for matrix application. DIUTHAME can facilitate MSI at a low mass, as there is no interference from matrix-derived peaks, and should provide high-quality, reproducible mass images more easily than MALDI-MSI.

Preparation and comparison of Fe3O4@graphene oxide nanoclusters for analysis of glimepiride in urine by surface-assisted laser desorption/ionization time-of-flight mass spectrometry.

Graphene oxide (GO) has the ability to absorb certain compounds, and it can be modified with functional groups for different purposes; for instance, iron oxide (IO) nanoparticles can be used to concentrate analyte by a magnet. Recently, many kinds of GO have been developed, such as single-layer GO (SLGO), two-to-four layers of GO (i.e., few-layer GO, FLGO2-4), and four-to-eight layers of GO (i.e., multi-layer GO, MLGO4-8). However, the abilities of these layered GO coated with IO nanoparticles have not been investigated. In this study, we conducted a novel analysis of glimepiride by using layered GO-coated magnetic clusters of IO nanoparticles that were synthesized through a simple and facile emulsion-solvent evaporation method. The methodology is based on (i) enrichment of glimepiride using the layered GO-coated magnetic clusters of IO nanoparticles (IO@SLGO, IO@FLGO2-4, and IO@MLGO4-8), and (ii) rapid determination using magnetic cluster-based surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOFMS). We found that IO@MLGO4-8, the magnetic cluster with the greatest number of GO layers, had the best limit of detection (28.6 pmol/µL for glimepiride). The number of GO layers played a significant role in increasing the sensitivity of the SALDI-MS, indicating that the size of GO in the magnetic clusters contributed to the desorption/ionization efficiency. To the best of our knowledge, this is the first study to enrich glimepiride using magnetic clusters of different GO types and to show that the glimepiride in HLB purified urine adsorbed by magnetic clusters can be analyzed by SALDI-TOFMS.

Confining analyte droplets on visible Si pillars for improving reproducibility and sensitivity of SALDI-TOF MS.

We present a universal method to efficiently improve reproducibility and sensitivity of surface-assisted laser desorption/ionization time of flight mass spectrometry (SALDI-TOF MS). In this method, the Si pillar array with unique surface wettability is used as substrate for ionizing analyte. The Si pillar is fabricated based on the combination of photolithography and metal-assisted chemical etching, which is of hydrophilic top and hydrophobic bottom and side wall. Based on the surface wettability of the Si pillar, a droplet of an aqueous analyte solution can be confined on the top of the Si pillar. After evaporation of solvent, an analyte deposition spot is formed on the top of Si pillar. The visible size of the Si pillar allows the sample spot to be easily found. Meanwhile, the diameter of the Si pillar is smaller than that of the laser, allowing the observation of all analyte molecules under one laser shot. Therefore, the reproducibility and sensitivity are highly improved with this method, which allows for the quantitative analysis. Furthermore, this method is applicable for different analytes dissolved in water, including amino acids, dye molecules, polypeptides, and polymers. The application of this substrate is demonstrated by analyzing real samples at low concentration. It should be a promising method for sensitive and reproducible detection for SALDI-TOF MS. Graphical abstract ᅟ.

Nanoparticle-based surface assisted laser desorption ionization mass spectrometry: a review.

Great endeavors are undertaken to find effective nanoparticles to replace organic matrices for the analysis of small molecules using laser desorption ionization mass spectrometry (LDI-MS). Nanoparticles offer high sensitivity and better selectivity compared to conventional organic matrices. Surface assisted LDI-MS (SALDI-MS), and surface enhanced LDI-MS (SELDI-MS) provide clear background spectra without observable interferences peaks, and cause no fragmentation (soft ionization) of thermal and acidity labile molecules. This review article (with 460 references) summarizes the recent applications of nanoparticles including metallic, metal oxides, silicon, quantum dots, metal-organic frameworks and covalent organic frameworks, for the analysis of small molecules. Nanoparticles serve not only as surface for LDI-MS, but they can be also used as probe or pseudo-stationary phase for separation, enrichment, and microextraction. Hopefully, the knowledge and learning points gained from this review will deepen the understanding of nanoparticles applications for LDI-MS. Graphical Abstract Schematic representation of laser desorption ionization mass spectrometry using various nanoparticles (such as metallic nanoparticles, carbon nanomaterials, silicon based nanomaterials, metal oxides, quantum dots, metal-organic frameworks, and covalent organic frameworks). Advanced technologies using nanoparticles are also reviewed.

Core-shell hollow spheres of type C@MoS2 for use in surface-assisted laser desorption/ionization time of flight mass spectrometry of small molecules.

Mesoporous carbon hollow spheres coated with MoS2 (C@MoS2) were synthesized to obtain a material with large specific surface area, fast electron transfer efficiency and good water dispersibility. The composite material was applied as a matrix for the analysis of small molecules by surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS). The use of a core-shell C@MoS2 matrix strongly reduces matrix background interferences and increases signal intensity in the analysis of sulfonamides antibiotics (SAs), cationic dyes, emodin, as well as estrogen and amino acids. The composite material was applied to the SALDI-TOF MS analysis of selected molecules in (spiked) real samples. The ionization mechanism of the core-shell C@MoS2 as a matrix is discussed. The method exhibits low fragmentation interference, excellent ionization efficiency, high reproducibility and satisfactory salt tolerance. Graphical abstractSchematic representation of the method for fabrication of MoS2-coated mesoporous carbon hollow spheres (core-shell C@MoS2). As a new matrix, the nanocomposites were applied to analysis of small molecules by surface-assisted laser desorption/ionization time-of-flight mass spectrometry.

The Cooperativity of Fe3 O4 and Metal-Organic Framework as Multifunctional Nanocomposites for Laser Desorption Ionization Process.

A novel and facile strategy in developing a water stable magnetic metal-organic framework nanocomposite (Fe3 O4 @MOF) is herein reported, in which a Keggin polyoxometalate, phosphotungstic acid (HPW), was encapsulated within the MOF framework via one-pot synthesis method. The combination of HPW-embedded MOF and Fe3 O4 endowed the composite with high surface area, strong UV absorption, good hydrophilicity, and enhanced water stability. With these unique properties, the Fe3 O4 @MOF embedded HPW served as adsorbent as well as matrix for SALDI-MS (surface-assisted laser desorption ionization mass spectrometry) analysis of polar and non-polar compounds. The synergistic effect of Fe3 O4 and MOF showed an interference-free background at low mass region than the pristine MOF or Fe3 O4 counterparts. This simple approach can be used as new platform in developing magnetic MOF composites without the time consuming and labor-intensive preparation.

Metal oxide nanoparticles for latent fingerprint visualization and analysis of small drug molecules using surface-assisted laser desorption/ionization mass spectrometry.

We explored the applicability of different metal oxide nanoparticles (NPs; ZnO, TiO2, Fe2O3, and CeO2) for the optical imaging and mass spectrometric determination of small drug molecules in latent fingerprints (LFPs). Optical imaging was achieved using a dry method-simply dusting the LFPs with a minute amount of NP powder-and still images were captured using a digital microscope and a smartphone camera. Mass spectrometric determination was performed using the NPs as substrates for surface-assisted laser desorption ionization/mass spectrometry (SALDI-MS), which enabled the detection of small drug molecules with high signal intensities. The reproducibility of the results was studied by calculating the % error, SD, and RSD in the results obtained with the various metal oxide NPs. Collectively, the findings showed that using NPs can boost the intensity of the detected signal while minimizing background noise which is an issue predominantly associated with conventional organic matrices of MALDI-MS. Among the four metal oxide NPs, utilization of the Fe2O3 NPs led to the best SALDI performance and the highest detection sensitivity for the analytes of interest. The study was then extended by investigating the influence of time elapsed since the generation of the LFP on the detection of drug molecules in the LFP. The results demonstrated that this method allows the analysis of drug molecules after as long as one week at low and intermediate temperatures (0 and 25 °C). Therefore, the SALDI analysis of small molecules using inorganic NPs, which can be implemented in forensic laboratories for screening and detection purposes, as a powerful alternative to the use of organic matrices. Graphical abstract ᅟ.

Application of mesocellular siliceous foams (MCF) for surface-assisted laser desorption ionization mass spectrometry (SALDI-MS) Analysis of fingermarks.

Recent advances in nanotechnology applied in forensic sciences have contributed to consider new approaches including chemical evaluation of latent fingermarks. Significant improvement to the detection of small organic molecules has been reached with matrix-free methods associated to laser desorption/ionization mass spectrometry. The present study investigated the application of mesocellular siliceous foam (MCF) as an ionizing agent for laser desorption/ionization (LDI-MS) analysis of fingermarks as a proof of concept research. Fingermarks from three different donors were deposited directly onto a MALDI target plate and α-CHCA matrix solution, MCF ethanolic suspension or MCF/magnetic powder mixture were used for treatment. Microscopy characterization of MCF support showed particles with irregular morphology and variable sizes, and a unordered porous surface with pores diameter ranging from about 10 to 20 nm. Results showed less intense peaks in the spectra produced by the MCF support (control). Analysis of fingermarks showed ions related to endogenous and exogenous molecular components, including possible lipids from human sebum and quaternary ammonium cations commonly present in cosmetics. Promising and reproducible results were obtained for the fingermarks dusted with the MCF/magnetic powder mixture. Considering the forensic applications of nanomaterials for the analysis of small molecules in biological samples by matrix-free LDI techniques, the advantages of silica based materials should be further investigated.

SALDI-TOF-MS analyses of small molecules (citric acid, dexasone, vitamins E and A) using TiO2 nanocrystals as substrates.

Surface-assisted laser desorption/ionisation time-of-flight mass spectrometry (SALDI-TOF-MS) might be the method of choice for the analysis of low mass molecules (less than m/z 500). Titanium dioxide (TiO2) nanocrystals as a substrate for SALDI-TOF-MS improve the reproducibility of the signal intensities and prevent the fragmentation of some molecules upon laser irradiation, as we have previously shown. In addition, variously shaped and sized TiO2 nanocrystals/substrates for SALDI-MS could be used for quantification of small molecules, which are otherwise difficult to detect with the assistance of organic matrices. TiO2-assisted LDI-MS spectra could be acquired with excellent reproducibility and repeatability and with low detection limit. In the current study, we analysed the spectra of dexasone, citric acid, vitamin E and vitamin A acquired with TiO2 nanocrystals of various shapes and dimensions, i.e. the colloidal TiO2 nanoparticles (TiO2 NPs), TiO2 prolate nanospheroids (TiO2 PNSs) and TiO2 nanotubes (TiO2 NTs). Various shapes and dimensions of substrates were used since these factors determine desorption and ionisation processes. The homogeneity on the target plate was compared based on signal-to-noise values of peaks of interest of analysed molecules as well as the within-day and day-to-day repeatability. In summary, the obtained results show that the applicability of individual TiO2 nanocrystals depends on the analyte. Signals which are acquired with the assistance of TiO2 PNSs have the highest sensitivity and reproducibility (the smallest standard deviation), even compared with those in the LDI mode. This implies that TiO2 PNSs could also be suitable for quantitative analyses of small molecules.

Diamond nanowires: a novel platform for electrochemistry and matrix-free mass spectrometry.

Over the last decades, carbon-based nanostructures have generated a huge interest from both fundamental and technological viewpoints owing to their physicochemical characteristics, markedly different from their corresponding bulk states. Among these nanostructured materials, carbon nanotubes (CNTs), and more recently graphene and its derivatives, hold a central position. The large amount of work devoted to these materials is driven not only by their unique mechanical and electrical properties, but also by the advances made in synthetic methods to produce these materials in large quantities with reasonably controllable morphologies. While much less studied than CNTs and graphene, diamond nanowires, the diamond analogue of CNTs, hold promise for several important applications. Diamond nanowires display several advantages such as chemical inertness, high mechanical strength, high thermal and electrical conductivity, together with proven biocompatibility and existence of various strategies to functionalize their surface. The unique physicochemical properties of diamond nanowires have generated wide interest for their use as fillers in nanocomposites, as light detectors and emitters, as substrates for nanoelectronic devices, as tips for scanning probe microscopy as well as for sensing applications. In the past few years, studies on boron-doped diamond nanowires (BDD NWs) focused on increasing their electrochemical active surface area to achieve higher sensitivity and selectivity compared to planar diamond interfaces. The first part of the present review article will cover the promising applications of BDD NWS for label-free sensing. Then, the potential use of diamond nanowires as inorganic substrates for matrix-free laser desorption/ionization mass spectrometry, a powerful label-free approach for quantification and identification of small compounds, will be discussed.

Highly selective and sensitive histamine and tryptamine analysis using SiO2@AuNPs@PDA molecularly imprinted polymer coupled with SALDI-TOF MS.

A combination of SiO2@AuNPs@PDA molecularly imprinted and surface-assisted laser desorption/ionization-time-of-flight mass spectrometry (SALDI-TOF MS) was devised as a method for highly specific and ultrasensitive detection of two biogenic amines-histamine (HIS) and tryptamine (TRP)-in real samples. In this strategy, AuNPs modified amino-abundant silica nanospheres (SiO2@AuNPs). The prepared SiO2@AuNPs were used as a substrate to synthesize a molecularly imprinted polymer (MIP) through in situ dopamine self-polymerization with HIS and TRP as the template molecules (SiO2@AuNP@PDA-MIP). The as-prepared MIP structure, properties, and target-analyte identification conditions were characterized and optimized and it was used as the matrix for MS. Compared to the case of nonimprinted materials, the imprinting function endowed the matrix with a higher selectivity for capturing the target molecules. The enriched analytes were directly and rapidly identified using SALDI-TOF MS without elution. Meanwhile, the proposed method has low background interference, good reproducibility and stability, high salt tolerance, and satisfactory linearity (R2 > 0.99), and it enables ultrasensitive detection of HIS and TRP (limits of detection for HIS and TRP were 0.2 and 0.1 ng mL-1, respectively). Moreover, the proposed method was applied to analyze samples of real beer, sausage, and chicken, and the results agreed with those obtained via liquid chromatography-MS, suggesting that the method has excellent practical applications in the field of food safety.

Dual-modal analysis of cis-diols in traditional Chinese medicine via boronic acid incorporated metal organic frameworks.

In this study, a boronic acid incorporated metal organic frameworks (inBA-MIL-100) were prepared via metal-ligand-fragment co-assembly strategy. The prepared frameworks can be served either as enrichment sorbent or SALDI-MS matrix for cis-diol containing molecules. Thus, a dual-modal analysis of cis-diols in traditional Chinese medicine has been established. Several significant advantages of the proposed strategy have been experimentally demonstrated, including high selectivity, high binding capacity (70 mg/g), good generality (5-250 µg/mL for HPLC based sample preparation, 10-500 ng/mL for SALDI-MS), high sensitivity (LOD: 180 ng/mL for HPLC based sample preparation, 5 ng/mL for SALDI-MS) and reliable quantification (RSD<3 % for HPLC based sample preparation, RSD<12 % for SALDI-MS) performance. Finally, the successful analysis of various cis-diols (active component and mycotoxin) in various Chinese traditional medicine was also achieved.

Imaging Analysis of Phosphatidylcholines and Diacylglycerols Using Surface-Assisted Laser Desorption/Ionization Mass Spectrometry with Metal Film Formed by Mist Chemical Vapor Deposition.

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) has been widely used for analyses of biomolecules and industrial materials. Surface-assisted laser desorption/ionization (SALDI) is studied to complement the ionization ability for the MALDI/MS. In this study, lab-made mist chemical vapor deposition (mist CVD) system was used to produce metal films as ionization assistance materials for SALDI/MS. The system could give Ag film from inexpensive silver trifluoroacetate solution rapidly and simply under atmospheric pressure. Phosphatidylcholines could be detected high sensitively and diacylglycerols (DAGs) could not be detected in MALDI/MS. In the SALDI/MS and the MS imaging with Ag film by mist CVD, both the phosphatidylcholines and the DAGs could be detected and the localized images. In the Ag film-SALDI/MS of lipids, not only Ag-adducted ions but also Na- and K-adducted ions were detected. The Ag film formed by the mist CVD to act as an ionization-assistance material and a cationization agent in SALDI would be useful in MS imaging of biological tissue sections.

Serum Lipidomic Fingerprints Encode Early Diagnosis and Staging of Lung Cancer on a Novel PbS/Au-Layered Substrate.

Lung cancer (LC) is a major cause of mortality among malignant tumors. Early diagnosis through lipidomic profiling can improve prognostic outcomes. In this study, a uniform PbS/Au-layered substrate that enhances the laser desorption/ionization process, an interfacial process triggered on the substrate surface upon laser excitation, was designed to efficiently characterize the lipidomic profiles of LC patient serum. By controlling the stacking arrangement and particle sizes of PbS QDs and AuNPs, the optimized substrate promotes the generation of excited electrons and creates an enhanced electric field that polarizes analyte molecules, facilitating ion adduction formation ([M + Na]+ and [M + K]+) and enhancing detection sensitivity down to the femtomole level. Combining multivariate statistics and machine learning, a distinct lipidomic biomarker panel is successfully identified for the early diagnosis and staging of LC, with an accurate prediction validated by an area under the curve of 0.9479 and 0.9034, respectively. We also found that 18 biomarkers were significantly correlated with six metabolic pathways associated with LC. These results demonstrate the potential of this innovative PbS/Au-layered substrate as a sensitive platform for accurate diagnosis of LC and facilitate the development of lipidomic-based diagnostic tools for other cancers.

Two-dimensional boron nanosheets for selective enrichment and detection of cis-diol compounds by surface-assisted laser desorption/ionization time-of-flight mass spectrometry.

Surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS) is an effective method for detecting of low-mass molecules. In this study, two-dimensional boron nanosheets (2DBs) were fabricated through thermal oxidation etching and coupling liquid exfoliation technologies, and applied as a matrix and selective sorbent for detecting cis-diol compounds by SALDI-TOF MS. The outstanding nanostructure and boric acid active sites of 2DBs endow them with sensitivity for cis-diol compound detection, excellent selectivity, and low background interference for complex samples. The specific in-situ enrichment faculty of the 2DBs as a matrix was investigated by SALDI-TOF MS using glucose, arabinose, and lactose as model analytes. In the presence of 100 -fold more interfering substances, the 2DBs showed high selectivity against cis-diol compounds, and exhibited a better sensitivity and a reduced limit of detection through enrichment treatment than graphene oxide matrices. The linearity, limit of detection (LOD), reproducibility, and accuracy of the method were evaluated under optimized conditions. The results showed that the linear relationships of six saccharides remained in the range of 0.05-0.6 mM with a correlation coefficient r ≥0.98. The LODs of six saccharides were 1 nM (glucose, lactose, mannose, fructose) and 10 nM (galactose, arabinose). Sample-to-sample (n = 6) with relative standard deviations (RSDs) of 3.2% to 8.1% were observed. Recoveries (n = 5) of 87.9-104.6% were obtained at three spiked levels in the milk samples. The proposed strategy promoted the development of a matrix for use with SALDI-TOF MS detection, in which the UV absorption properties and enrichment capabilities of 2DBs were combined.