RESUMO
Nanopatterning on biomaterials has attracted significant attention as it can lead to the development of biomedical devices capable of performing diagnostic and therapeutic functions while being biocompatible. Among various nanopatterning techniques, electron-beam lithography (EBL) enables precise and versatile nanopatterning in desired shapes. Various biomaterials are successfully nanopatterned as bioresists by using EBL. However, the use of high-energy electron beams (e-beams) for high-resolutive patterning has incorporated functional materials and has caused adverse effects on biomaterials. Moreover, the scattering of electrons not absorbed by the bioresist leads to proximity effects, thus deteriorating pattern quality. Herein, EBL-based nanopatterning is reported by inducing molecular degradation of amorphous silk fibroin, followed by selectively inducing secondary structures. High-resolution EBL nanopatterning is achievable, even at low-energy e-beam (5 keV) and low doses, as it minimizes the proximity effect and enables precise 2.5D nanopatterning via grayscale lithography. Additionally, integrating nanophotonic structures into fluorescent material-containing silk allows for fluorescence amplification. Furthermore, this post-exposure cross-linking way indicates that the silk bioresist can maintain nanopatterned information stored in silk molecules in the amorphous state, utilizing for the secure storage of nanopatterned information as a security patch. Based on the fabrication technique, versatile biomaterial-based nanodevices for biomedical applications can be envisioned.
RESUMO
Polyurethane/silk protein-bismuth halide oxide composite films were fabricated using a blending-wet phase transformationin situsynthesis method. The crystal structure, micromorphology, and optical properties were conducted using XRD, SEM, and UV-Vis DRS characterize techniques. The results indicated that loaded silk protein enhanced the hydrophilicity and pore structure of the polyurethane composite films. The active species BiOX were observed to grow as nanosheets with high dispersion on the internal skeleton and silk protein surface of the polyurethane-silk protein film. The photocatalytic efficiency of BiOX/PU-SF composite films was assessed through the degradation of Rhodamine B under visible light irradiation. Among the tested films, the BiOBr/PU-SF composite exhibited the highest removal rate of RhB at 98.9%, surpassing the removal rates of 93.7% for the BiOCl/PU-SF composite and 85.6% for the BiOI/PU-SF composite. Furthermore, an active species capture test indicated that superoxide radical (â¢O2-) and hole (h+) species played a predominant role in the photodegradation process.
Assuntos
Bismuto , Interações Hidrofóbicas e Hidrofílicas , Fotólise , Poliuretanos , Poliuretanos/química , Bismuto/química , Catálise , Seda/química , Rodaminas/química , Corantes/química , Óxidos/química , Porosidade , LuzRESUMO
The improper and inadequate treatment of industrial, agricultural, and household wastewater exerts substantial pressure on the existing ecosystem and poses a serious threat to the health of both humans and animals. To address these issues, different types of materials have been employed to eradicate detrimental pollutants from wastewater and facilitate the reuse of water resources. Nevertheless, owing to the challenges associated with the degradation of these traditional materials post-use and their incompatibility with the environment, natural biopolymers have garnered considerable interest. Silk protein, as a biomacromolecule, exhibits advantageous characteristics including environmental friendliness, low carbon emissions, biodegradability, sustainability, and biocompatibility. Considering recent research findings, this comprehensive review outlines the structure and properties of silk proteins and offers a detailed overview of the manufacturing techniques employed in the production of silk-based materials (SBMs) spanning different forms. Furthermore, it conducts an in-depth analysis of the state-of-the-art SBMs for water treatment purposes, encompassing adsorption, catalysis, water disinfection, desalination, and biosensing. The review highlights the potential of SBMs in addressing the challenges of wastewater treatment and provides valuable insights into prospective avenues for further research.
Assuntos
Seda , Purificação da Água , Purificação da Água/métodos , Seda/química , Química Verde/métodos , Carbono/química , Águas Residuárias/químicaRESUMO
CONTEXT: Due to their excellent biocompatibility and degradability, cellulose/spider silk protein composites hold a significant value in biomedical applications such as tissue engineering, drug delivery, and medical dressings. The interfacial interactions between cellulose and spider silk protein affect the properties of the composite. Therefore, it is important to understand the interfacial interactions between spider silk protein and cellulose to guide the design and optimization of composites. The study of the adsorption of protein on specific surfaces of cellulose crystal can be very complex using experimental methods. Molecular dynamics simulations allow the exploration of various physical and chemical changes at the atomic level of the material and enable an atomic description of the interactions between cellulose crystal planes and spider silk protein. In this study, molecular dynamics simulations were employed to investigate the interfacial interactions between spider silk protein (NTD) and cellulose surfaces. Findings of RMSD, RMSF, and secondary structure showed that the structure of NTD proteins remained unchanged during the adsorption process. Cellulose contact numbers and hydrogen bonding trends on different crystalline surfaces suggest that van der Waals forces and hydrogen bonding interactions drive the binding of proteins to cellulose. These findings reveal the interaction between cellulose and protein at the molecular level and provide theoretical guidance for the design and synthesis of cellulose/spider silk protein composites. METHODS: MD simulations were all performed using the GROMACS-5.1 software package and run with CHARMM36 carbohydrate force field. Molecular dynamics simulations were performed for 500 ns for the simulated system.
Assuntos
Celulose , Ligação de Hidrogênio , Simulação de Dinâmica Molecular , Seda , Aranhas , Celulose/química , Aranhas/química , Animais , Seda/química , Adsorção , Ligação Proteica , Fibroínas/químicaRESUMO
Spider silk is a natural fiber known as "biosteel" with the strongest composite performance, such as high tensile strength and toughness. It is also equipped with excellent biocompatibility and shape memory ability, thus shows great potential in many fields such as biomedicine and tissue engineering. Spider silk is composed of macromolecular spidroin with rich structural diversity. The characteristics of the primary structure of natural spidroin, such as the high repeatability of amino acids in the core repetitive region, the high content of specific amino acids, the large molecular weight, and the high GC content of the spidroin gene, have brought great difficulties in heterologous expression. This review discusses focuses on the relationship between the featured motifs of the microcrystalline region in the repetitive unit of spidroin and its structure, as well as the spinning performance and the heterologous expression. The optimization design for the sequence of spidroin combined with heterologous expression strategy has greatly promoted the development of the biosynthesis of spider silk proteins. This review may facilitate the rational design and efficient synthesis of recombinant spidroin.
Assuntos
Fibroínas , Aranhas , Animais , Seda/genética , Seda/química , Fibroínas/genética , Fibroínas/química , Proteínas de Artrópodes , Materiais Biocompatíveis , Aminoácidos , Aranhas/genéticaRESUMO
Biology resolves design requirements toward functional materials by creating nanostructured composites, where individual components are combined to maximize the macroscale material performance. A major challenge in utilizing such design principles is the trade-off between the preservation of individual component properties and emerging composite functionalities. Here, polysaccharide pectin and silk fibroin were investigated in their composite form with pectin as a thermal-responsive ion conductor and fibroin with exceptional mechanical strength. We show that segregative phase separation occurs upon mixing, and within a limited compositional range, domains â¼50 nm in size are formed and distributed homogeneously so that decent matrix collective properties are established. The composite is characterized by slight conformational changes in the silk domains, sequestering the hydrogen-bonded ß-sheets as well as the emergence of randomized pectin orientations. However, most dominant in the composite's properties is the introduction of dense domain interfaces, leading to increased hydration, surface hydrophilicity, and increased strain of the composite material. Using controlled surface charging in X-ray photoelectron spectroscopy, we further demonstrate Ca ions (Ca2+) diffusion in the pectin domains, with which the fingerprints of interactions at domain interfaces are revealed. Both the thermal response and the electrical conductance were found to be strongly dependent on the degree of composite hydration. Our results provide a fundamental understanding of the role of interfacial interactions and their potential applications in the design of material properties, polysaccharide-protein composites in particular.
Assuntos
Fibroínas , Nanoestruturas , Seda/química , Fibroínas/química , Polissacarídeos , Pectinas , Materiais Biocompatíveis/químicaRESUMO
Silk, especially spider and insect silk, is a highly versatile biomaterial with potential applications in biomedicine, materials science, and biomimetic engineering. The primary structure of silk proteins is the basis for the mechanical properties of silk fibers. Biotechnologies such as single-molecule sequencing have facilitated an increasing number of reports on new silk genes and assembled silk proteins. Therefore, this review aims to provide a comprehensive overview of the recent advances in representative spider and insect silk proteins, focusing on identification methods, sequence characteristics, and de novo design and assembly. The review discusses three identification methods for silk genes: polymerase chain reaction (PCR)-based sequencing, PCR-free cloning and sequencing, and whole-genome sequencing. Moreover, it reveals the main spider and insect silk proteins and their sequences. Subsequent de novo assembly of artificial silk is covered and future research directions in the field of silk proteins, including new silk genes, customizable artificial silk, and the expansion of silk production and applications are discussed. This review provides a basis for the genetic aspects of silk production and the potential applications of artificial silk in material science and biomedical engineering.
Assuntos
Seda , Aranhas , Animais , Seda/química , Aranhas/química , Biotecnologia , Proteínas de Insetos/genética , Engenharia Biomédica , Proteínas Recombinantes/metabolismoRESUMO
Spider silk is the self-assembling product of silk proteins each containing multiple repeating units. Each repeating unit is entirely intrinsically disordered or contains a small disordered domain. The role of the disordered domain/unit in conferring silk protein storage and self-assembly is not fully understood yet. Here, we used biophysical and biochemical techniques to investigate the self-assembly of a miniature version of a minor ampullate spidroin (denoted as miniMiSp). miniMiSp consists of two identical intrinsically disordered domains, one folded repetitive domain, and two folded terminal domains. Our data indicated that miniMiSp self-assembles into oligomers and further into liquid droplets. The oligomerization is attributed to the aggregation-prone property of both the disordered domains and the folded repetitive domain. Our results support the model of micellar structure for silk proteins at high protein concentrations. The disordered domain is indispensable for liquid droplet formation via liquid-liquid phase separation, and tyrosine residues located in the disordered domain make dominant contributions to stability of the liquid droplets. As the same tyrosine residues are also critical to fibrillation, the liquid droplets are likely an intermediate state between the solution state and the fiber state. Additionally, the terminal domains contribute to the pH- and salt-dependent self-assembly properties.
Assuntos
Fibroínas , Proteínas Intrinsicamente Desordenadas , Aranhas , Aranhas/química , Animais , Proteínas Intrinsicamente Desordenadas/química , Fibroínas/química , Seda/química , Concentração de Íons de Hidrogênio , Domínios Proteicos , Multimerização Proteica , Sequência de AminoácidosRESUMO
In transdermal drug delivery system (TDDS) patches, achieving prolonged adhesion, high drug loading, and rapid drug release simultaneously presented a significant challenge. In this study, a PHT-SP-Cu2+ adhesive was synthesized using polyethylene glycol (PEG), hexamethylene diisocyanate (HDI), trimethylolpropane (TMP), and silk protein (SP) as functional monomers which were combined with Cu2+ to improve the adhesion, drug loading, and drug release of the patch. The structure of the adhesion chains and the formation of Cu2+-p-π conjugated network in PHT-SP-Cu2+ were characterized and elucidated using different characterization methods including FT-IR, 13C NMR, XPS, SEM imaging and thermodynamic evaluation. The formulation of pressure-sensitive adhesive (PSA) was optimized through comprehensive research on adhesion, mechanics, rheology, and surface energy. The formulation of 3 wt.% SP and 3 wt.% Cu2+ provided superior adhesion properties compared to commercial standards. Subsequently, the peel strength of PHT-SP-Cu2+ was 7.6 times higher than that of the commercially available adhesive DURO-TAK® 87-4098 in the porcine skin peel test. The adhesion test on human skin confirmed that PHT-SP-Cu2+ could adhere to the human body for more than six days. Moreover, the drug loading, in vitro release test and skin permeation test were investigated using ketoprofen as a model drug, and the results showed that PHT-SP-Cu2+ had the efficacy of improving drug compatibility, promoting drug release and enhancing skin permeation as a TDDS. Among them, the drug loading of PHT-SP-Cu2+ was increased by 6.25-fold compared with PHT, and in the in vivo pharmacokinetic analysis, the AUC was similarly increased by 19.22-fold. The mechanism of α-helix facilitated drug release was demonstrated by Flori-Hawkins interaction parameters, molecular dynamics simulations and FT-IR. Biosafety evaluations highlighted the superior skin cytocompatibility and safety of PHT-SP-Cu2+ for transdermal applications. These results would contribute to the development of TDDS patch adhesives with outstanding adhesion, drug loading and release efficiency. STATEMENT OF SIGNIFICANCE: A new adhesive, PHT-SP-Cu2+, was created for transdermal drug delivery patches. Polyethylene glycol, hexamethylene diisocyanate, trimethylolpropane, silk protein, and Cu2+ were used in synthesis. Characterization techniques confirmed the structure and Cu2+-p-π conjugated networks. Optimal formulation included 3 wt.% SP and 3 wt.% Cu2+, exhibiting superior adhesion. PHT-SP-Cu2+ showed 7.6 times higher peel strength than DURO-TAK® 87-4098 on porcine skin and adhered to human skin for over six days. It demonstrated a 6.25-fold increase in drug loading compared to PHT, with 19.22-fold higher AUC in vivo studies. α-helix facilitated drug release, proven by various analyses. PHT-SP-Cu2+ showed excellent cytocompatibility and safety for transdermal applications. This study contributes to developing efficient TDDS patches.
Assuntos
Administração Cutânea , Liberação Controlada de Fármacos , Seda , Adesivos Teciduais , Animais , Adesivos Teciduais/química , Adesivos Teciduais/farmacologia , Humanos , Seda/química , Sistemas de Liberação de Medicamentos , Suínos , Pele/metabolismo , Pele/efeitos dos fármacos , Adesivo Transdérmico , Cobre/química , Cobre/farmacocinéticaRESUMO
Silk proteins, as natural macromolecules, have extensive applications in biomaterials and biomedicine. In the silkworm, the expression of silk protein genes is negatively associated with ecdysone during the molt stage, while it is positively correlated with juvenile hormone during the intermolt stage. In our previous study, overexpression of an isoform Z2 of Broad Complex (BmBrC-Z2), an ecdysone early response factor, significantly reduced the expression of silk protein genes. However, the underlying regulatory mechanism remains unclear. In this study, we conducted transcriptomic analysis and found that overexpressing BmBrC-Z2 significantly upregulated the expression level of multiprotein bridging factor 2 (BmMBF2), an inhibitor of fibroin heavy chain (FibH). Further investigations revealed that BmBrC-Z2 directly regulated BmMBF2 by binding to cis-regulatory elements, as demonstrated using Dual-Luciferase Reporter Gene Assay, EMSA, and ChIP-PCR assay. Additionally, when using the CRISPR/Cas9 system to knock out BmMBF2, silk protein genes were significantly upregulated during the molt stage of mutant larvae. These findings uncover the negative regulation of silk protein synthesis by the ecdysone signaling cascade, specifically through the manipulation of BmMBF2 expression during the molt stage. This study enhances to our understanding of the temporal regulatory mechanism governing silk protein synthesis and offers a potential strategy for improving silk yield.
RESUMO
The efficient synthesis of silk protein is heavily reliant on the ingestion of massive nutrients during the peak growth phase in the silkworm. However, the molecular mechanism of nutritional regulation of silk protein synthesis remains unknown. In this study, we investigated the impact of nutrient deficiency on the synthesis of silk protein. Nutritional deficiency led to a reduction in silk yield, accompanied by decreased levels of silk proteins and fibroin heavy chain (FibH)-activating transcription factors SGF1 and Dimm. Furthermore, insulin enhanced the protein levels of SGF1 and Dimm, which can be attenuated by specific inhibitors of PI3K. Co-immunoprecipitation analysis showed that the nutrient pathway factor protein kinase B (Akt) could interact with SGF1 protein. Knockdown of Akt reduced the phosphorylation level of SGF1 and impedes its nuclear translocation. Further studies revealed that SGF1 was directly bound to Fkh site in the 22-43 region upstream of ATG of Dimm gene to activate its transcription. In conclusion, during the peak growth phase, nutrition promotes the massive synthesis of silk protein through the PI3K-Akt-SGF1-Dimm pathway. This study offers valuable insights into the efficient synthesis of silk proteins and establishes a theoretical foundation for improving silk yield.
RESUMO
Developing hybrid hydrogel dressings with anti-inflammatory, antioxidant, angiogenetic, and antibiofilm activities with higher bone tissue penetrability to accelerate diabetic wound healing and prevent diabetic foot osteomyelitis (DFO) is highly desirable in managing diabetic wounds. Herein, the glycopeptide teicoplanin is used for the first time as a green reductant to chemically reduce graphene oxide (GO). The resulting teicoplanin-decorated reduced graphene oxide (rGO) is incorporated into a mixture of silk proteins (SP) and crosslinked with genipin to yield a physicochemically crosslinked rGO-SP hybrid hydrogel. This hybrid hydrogel exhibits high porosity, self-healing, shear-induced thinning, increased cell proliferation and migration, and mechanical properties suitable for tissue engineering. Moreover, the hybrid hydrogel eradicates bacterial biofilms with a high penetrability index in agar and hydroxyapatite disks covered with biofilms, mimicking bone tissue. In vivo, the hybrid hydrogel accelerates the healing of noninfected wounds in a diabetic rat and infected wounds in a diabetic mouse by upregulating anti-inflammatory cytokines and downregulating matrix metalloproteinase-9, promoting M2 macrophage polarization and angiogenesis. The implantation of hybrid hydrogel into the infected site of mouse tibia improves bone regeneration. Hence, the rGO-SP hybrid hydrogel can be a promising wound dressing for treating infectious diabetic wounds, providing a further advantage in preventing DFO.
Assuntos
Diabetes Mellitus Experimental , Pé Diabético , Grafite , Hidrogéis , Osteomielite , Teicoplanina , Cicatrização , Grafite/química , Animais , Cicatrização/efeitos dos fármacos , Hidrogéis/química , Hidrogéis/farmacologia , Pé Diabético/tratamento farmacológico , Osteomielite/tratamento farmacológico , Ratos , Camundongos , Teicoplanina/química , Teicoplanina/farmacologia , Masculino , Biofilmes/efeitos dos fármacos , Seda/química , Ratos Sprague-Dawley , Antibacterianos/química , Antibacterianos/farmacologia , Células RAW 264.7RESUMO
Aqueous zinc-iodine (Zn-I2) batteries hold potential for large-scale energy storage but struggle with shuttle effects of I2 cathodes and poor reversibility of Zn anodes. Here, an interfacial gelation strategy is proposed to suppress the shuttle effects and improve the Zn reversibility simultaneously by introducing silk protein (SP) additive. The SP can migrate bidirectionally toward cathode and anode interfaces driven by the periodically switched electric field direction during charging/discharging. For I2 cathodes, the interaction between SP and polyiodides forms gelatinous precipitate to avoid the polyiodide dissolution, evidenced by excellent electrochemical performance, including high specific capacity and Coulombic efficiency (CE) (215 mAh g-1 and 99.5% at 1 C), excellent rate performance (≈170 mAh g-1 at 50 C), and extended durability (6000 cycles at 10 C). For Zn anodes, gelatinous SP serves as protective layer to boost the Zn reversibility (99.7% average CE at 2 mA cm-2) and suppress dendrites. Consequently, a 500 mAh Zn-I2 pouch cell with high-loading cathode (37.5 mgiodine cm-2) and high-utilization Zn anode (20%) achieves remarkable energy density (80 Wh kg-1) and long-term durability (>1000 cycles). These findings underscore the simultaneous modulation of both cathode and anode and demonstrate the potential for practical applications of Zn-I2 batteries.
RESUMO
The molecular interaction of low-molecular-weight SPP with common surfactants (SDS and DTAB) is a more complicated process than has been long believed. In this work, the interaction mechanism between SDS/DTAB and SPP was proposed using multiple methods including conductivity measurements, ST, UV-vis, FT-IR, DLS, fluorescence spectroscopy, and molecular docking simulations. Moreover, the foaming properties of the mixed systems were studied, and they were evaluated as cosmetics preservatives. The effects of various surfactant and protein concentrations and ratios on compatibility and functionality were studied. Based on the results, the mechanism of complex formation was identified as a cooperative van der Waals interaction followed by hydrophobic interaction and hydrogen bonding. A simpler head group leads to easier aggregation and interaction with the SPP, the formation of smaller-sized complexes, and a weaker impact on the fluorescence intensity. Thus, SDS monomers easily aggregate on SPP chains, leading to a stronger influence on the final secondary structure of SPP. This was confirmed by multiple spectroscopy methods. Comparing its single surfactant system, the SDS-SPP solution demonstrates better foaming power and the DTAB-SPP solution shows higher bacteriostatic activity. The good compatibility between SDS/DTAB and SPP can improve the functional properties of SDS or DTAB as well as lower the optimal concentration of each component. These results provide data and theoretical support for the design of cosmetic product formulas.
RESUMO
Creating photonic crystals that can integrate and switch between multiple structural color images will greatly advance their utility in dynamic information transformation, high-capacity storage, and advanced encryption, but has proven to be highly challenging. Here, it is reported that by programmably integrating newly developed 1D quasi-periodic folding structures into a 3D photonic crystal, the generated photonic superstructure exhibits distinctive optical effects that combine independently manipulatable specular and anisotropic diffuse reflections within a versatile protein-based platform, thus creating different optical channels for structural color imaging. The polymorphic transition of the protein format allows for the facile modulation of both folding patterns and photonic lattices and, therefore, the superstructure's spectral response within each channel. The capacity to manipulate the structural assembly of the superstructure enables the programmable encoding of multiple independent patterns into a single system, which can be decoded by the simple adjustment of lighting directions. The multifunctional utility of the photonic platform is demonstrated in information processing, showcasing its ability to achieve multimode transformation of information codes, multi-code high-capacity storage, and high-level numerical information encryption. The present strategy opens new pathways for achieving multichannel transformable imaging, thereby facilitating the development of emerging information conversion, storage, and encryption media using photonic crystals.
RESUMO
Insects produce silk to form cocoons, nests, and webs, which are important for their survival and reproduction. However, little is known about the molecular mechanism of silk protein synthesis at the translation level. The solute carrier family 7 (SLC7) genes are involved in activating the target of rapamycin complex 1 (TORC1) signaling pathway and protein translation process, but the physiological roles of SLC7 genes in silk-producing insects have not been reported. Here, we found that amino acid signaling regulates silk protein synthesis and larval development via the L-type amino acid transporter 1 (LAT1; also known as SLC7A5) in Bombyx mori. A total of 12 SLC7 homologs were identified in the silkworm genome, among which BmSLC7A5 was found to be a silk gland-enriched gene and may be involved in leucine transport. Bioinformatics analysis indicated that SLC7A5 displays high homology and a close phylogenetic relationship in silk-producing insects. Subsequently, we found that leucine treatment significantly increased silk protein synthesis by improving the transcription and protein levels of silk genes. Furthermore, systemic and silk gland-specific knockout of BmSLC7A5 led to decreased silk protein synthesis by inhibiting TORC1 signaling, and somatic mutation also resulted in arrested development from the 5th instar to the early pupal stage. Altogether, our study reveals that BmSLC7A5 is involved in regulating silk protein synthesis and larval development by affecting the TORC1 signaling pathway, which provides a new strategy and target for improving silk yield.
RESUMO
The burgeoning interest in biopolymer 3D printing arises from its capacity to meticulously engineer tailored, intricate structures, driven by the intrinsic benefits of biopolymers-renewability, chemical functionality, and biosafety. Nevertheless, the accessibility of economical and versatile 3D-printable biopolymer-based inks remains highly constrained. This study introduces an electroconductive ink for direct-ink-writing (DIW) 3D printing, distinguished by its straightforward preparation and commendable printability and material properties. The ink relies on chitosan as a binder, carbon fibers (CF) a low-cost electroactive filler, and silk fibroin (SF) a structural stabilizer. Freeform 3D printing manifests designated patterns of electroconductive strips embedded in an elastomer, actualizing effective strain sensors. The ink's high printability is demonstrated by printing complex geometries with porous, hollow, and overhanging structures without chemical or photoinitiated reactions or support baths. The composite is lightweight (density 0.29 ± 0.01 g/cm3), electroconductive (2.64 ± 0.06 S/cm), and inexpensive (20 USD/kg), with tensile strength of 20.77 ± 0.60 MPa and Young's modulus of 3.92 ± 0.06 GPa. 3D-printed structures exhibited outstanding electromagnetic interference (EMI) shielding effectiveness of 30-31 dB, with shielding of >99.9 % incident electromagnetic waves, showcasing significant electronic application potential. Thus, this study presents a novel, easily prepared, and highly effective biopolymer-based ink poised to advance the landscape of 3D printing technologies.
RESUMO
Natural silks are renewable proteins with impressive mechanical properties and biocompatibility that are useful in various fields. However, the cellular and spatial organization of silk-secreting organs remains unclear. Here, we combined single-nucleus and spatially resolved transcriptomics to systematically map the cellular and spatial composition of the silk glands (SGs) of mulberry silkworms late in larval development. This approach allowed us to profile SG cell types and cell state dynamics and identify regulatory networks and cell-cell communication related to efficient silk protein synthesis; key markers were validated via transgenic approaches. Notably, we demonstrated the indispensable role of the ecdysone receptor (ultraspiracle) in regulating endoreplication in SG cells. Our atlas presents the results of spatiotemporal analysis of silk-secreting organ architecture late in larval development; this atlas provides a valuable reference for elucidating the mechanism of efficient silk protein synthesis and developing sustainable products made from natural silk.
Assuntos
Bombyx , Proteínas de Insetos , Larva , Seda , Transcriptoma , Animais , Bombyx/genética , Bombyx/metabolismo , Seda/metabolismo , Larva/metabolismo , Larva/genética , Transcriptoma/genética , Proteínas de Insetos/metabolismo , Proteínas de Insetos/genética , Núcleo Celular/metabolismo , Receptores de Esteroides/metabolismo , Receptores de Esteroides/genética , Regulação da Expressão Gênica no Desenvolvimento , Perfilação da Expressão GênicaRESUMO
Juvenile hormone esterase (JHE) is the specific enzyme that degrades juvenile hormone (JH) and regulates the JH titer in insects. JH also regulates the development of the silk gland and the synthesis and secretion of silk proteins in Bombyx mori. Here, we identified nine possible JHE family members, Bmjhe1-9. Notably, Bmjhe6 is specifically expressed in the silk gland. Using semi-quantitative, quantitative real-time RT-PCR and Western blot, it was confirmed that Bmjhe6 was specifically expressed in the middle silk gland (MSG) with high levels in the anterior region of the MSG (A-MSG). The immunofluorescence localization analysis revealed that Bmjhe6 is produced within cells, secreted into the gland lumen, and co-transported with silk proteins into the anterior silk gland (ASG). In vitro hormone induction experiments demonstrated that Bmjhe6 responds to a JH analog, increasing its expression after 12-24 h, whereas 20-hydroxyecdysone inhibited it. In addition, Bmjhe6 knockdown using dsBmjhe6 injections accelerated larval development, resulting in increased larval body and silk gland weight. This induced disordered sericin genes (Ser2, Ser3) expression, and key genes in the JH synthesis pathway (BmKr-h1 and BmMet1) were significantly upregulated along with the transcription factors (SGF-1 and Sage). These results indicate that Bmjhe6 plays an important role in silk gland growth and silk protein synthesis by modulating JH signal.
RESUMO
Growth hormone deficiency (GHD) has become a serious healthcare burden, and presents a huge impact on the physical and mental health of patients. Here, we developed an actively separated microneedle patch (PAA/NaHCO3-Silk MN) based on silk protein for sustained release of recombinant human growth hormone (rhGH). Silk protein, as a friendly carrier material for proteins, could be constructed in mild full-water conditions and ensure the activity of rhGH. After manually pressing PAA/NaHCO3-Silk MN patch to skin for 1 min, active separation is achieved by absorbing the interstitial fluid (ISF) to trigger HCO3 ‒ in the active backing layer to produce carbon dioxide gas (CO2). In rats, the MN patch could maintain the sustained release of rhGH for more than 7 days, and produce similar effects as daily subcutaneous (S.C.) injections of rhGH in promoting height and weight with well tolerated. Moreover, the PAA/NaHCO3-Silk MN patch with the potential of painless self-administration, does not require cold chain transportation and storage possess great economic benefits. Overall, the PAA/NaHCO3-Silk MN patch can significantly improve patient compliance and increase the availability of drugs, meet current unmet clinical needs, improve clinical treatment effects of GHD patients.